main
History Download
Ray Publish 0.1.0 eb830dd

SN8F5703TG

SONIX · Microcontroller Units (MCUs/MPUs/SOCs) · TSSOP-24

SN8F5703TG from SONIX, in a TSSOP-24. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VSS power_in Ground (0 V) reference for the device.
2 P00/UTX/T2CC0/XIN bidirectional Port 0.0 GPIO; alternate functions are system clock external clock input (XIN), UART transmit (UTX) and Timer 2 capture 0 input (T2CC0).
3 P01/URX/T2CC1/XOUT bidirectional Port 0.1 GPIO; alternate functions are crystal/resonator drive output (XOUT), UART receive (URX) and Timer 2 capture 1 input (T2CC1).
4 P02/INT1/RST bidirectional Port 0.2 GPIO; alternate functions are system reset input (RST, active low) and external interrupt 1 (INT1).
5 P03/SSN/T2COM0 bidirectional Port 0.3 GPIO; alternate functions are SPI slave select (SSN) and Timer 2 compare 0 output (T2COM0).
6 P04/MISO/T2COM1 bidirectional Port 0.4 GPIO; alternate functions are SPI MISO (master reception / slave transmission) and Timer 2 compare 1 output (T2COM1).
7 P05/MOSI/T2COM2 bidirectional Port 0.5 GPIO; alternate functions are SPI MOSI (master transmission / slave reception) and Timer 2 compare 2 output (T2COM2).
8 P06/SCK/T2COM3 bidirectional Port 0.6 GPIO; alternate functions are SPI clock (SCK, output in master / input in slave) and Timer 2 compare 3 output (T2COM3).
9 P07/SCL/T2CC2 bidirectional Port 0.7 GPIO; alternate functions are I2C clock (SCL) and Timer 2 capture 2 input (T2CC2).
10 P10/SDA/T2CC3 bidirectional Port 1.0 GPIO; alternate functions are I2C data (SDA) and Timer 2 capture 3 input (T2CC3).
11 P11/T2 bidirectional Port 1.1 GPIO; alternate function is Timer 2 event counter input (T2).
12 P12/T2RL bidirectional Port 1.2 GPIO; alternate function is Timer 2 reload trigger input (T2RL), where a falling edge can reload the counter.
13 P13/AIN10/OPO/CMO bidirectional Port 1.3 GPIO; alternate functions are ADC input channel 10 (AIN10), OP-Amp output (OPO) and comparator output (CMO).
14 P14/AIN9/OPP/CMP bidirectional Port 1.4 GPIO; alternate functions are ADC input channel 9 (AIN9), OP-Amp positive input (OPP) and comparator positive input (CMP).
15 P15/AIN8/OPN/CMN0 bidirectional Port 1.5 GPIO; alternate functions are ADC input channel 8 (AIN8), OP-Amp negative input (OPN) and comparator negative input 0 (CMN0).
16 P16/AIN7/PWM22/CMN1 bidirectional Port 1.6 GPIO; alternate functions are ADC input channel 7 (AIN7), PWM output 22 (PWM22) and comparator negative input 1 (CMN1).
17 P17/AIN6/PWM12 bidirectional Port 1.7 GPIO; alternate functions are ADC input channel 6 (AIN6) and PWM output 12 (PWM12).
18 P25/AIN5/PWM21 bidirectional Port 2.5 GPIO; alternate functions are ADC input channel 5 (AIN5) and PWM output 21 (PWM21).
19 P24/AIN4/PWM11 bidirectional Port 2.4 GPIO; alternate functions are ADC input channel 4 (AIN4) and PWM output 11 (PWM11).
20 P23/AIN3/PWM20 bidirectional Port 2.3 GPIO; alternate functions are ADC input channel 3 (AIN3) and PWM output 20 (PWM20).
21 P22/AIN2/PWM10 bidirectional Port 2.2 GPIO; alternate functions are ADC input channel 2 (AIN2) and PWM output 10 (PWM10).
22 P21/AIN1/SWAT bidirectional Port 2.1 GPIO; alternate functions are ADC input channel 1 (AIN1) and the debug interface SWAT pin.
23 P20/AIN0/INT0/AVREFH bidirectional Port 2.0 GPIO; alternate functions are ADC input channel 0 (AIN0), external interrupt 0 (INT0) and external ADC high reference voltage input (AVREFH) when EVHENB is set.
24 VDD power_in Power supply pin for the device; the supply voltage limits are not stated in the supplied pages.

Key specifications

Parameter Value
Manufacturer SONIX
Package TSSOP-24
Category Single Chip Microcomputer/Microcontroller
Pins 24

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Voltage applied at VDD to VSS -0.3 6 V 146
Voltage applied at any pin to VSS (upper limit printed as VDD+0.3V) -0.3 V 146
Operating ambient temperature -40 85 °C 146
Storage ambient temperature -40 125 °C 146
Junction temperature -40 125 °C 146
VDD operating voltage VDD 1.8 5.5 V fcpu = 1MHz 146
Pull-up resistor (RUP) RUP 100 200 300 kΩ VDD = 3V 147
Pull-up resistor (RUP) RUP 50 100 150 kΩ VDD = 5V 147
Internal high clock generator frequency (FIHRC) FIHRC 31.84 32 32.16 MHz VDD = 1.8V to 5.5V, 25°C 147
Internal high clock generator frequency (FIHRC) FIHRC 31.68 31.99 MHz VDD = 1.8V to 5.5V, 25°C to 85°C 147
Internal high clock generator frequency (FIHRC) FIHRC 32.31 32.64 MHz VDD = 1.8V to 5.5V, -40°C to 25°C 147
Internal low clock generator frequency (FILRC) FILRC 12 16 24 kHz VDD = 5.0V, 25°C 147
LVD18 detect voltage VLVD18 1.7 1.8 1.9 V 25°C 147
LVD18 detect voltage VLVD18 1.6 1.8 2 V -40°C to 85°C 147
ADC operating voltage VADC 2 5.5 V 148
AIN channels input voltage (lower limit; upper limit printed as VREFH) VAIN 0 V VDD = 5V 148
AVREFH pin input voltage (upper limit printed as VDD) VREFH 2 V VDD = 5V 148
Internal 4V reference voltage VIREF 3.92 4 4.08 V VDD = 5V 148
Internal 3V reference voltage VIREF 2.94 3 3.06 V VDD = 5V 148
Internal 2V reference voltage VIREF 1.96 2 2.04 V VDD = 5V 148
ADC input offset voltage (non-trimmed) VOFFSET -10 0 10 mV Non-trimmed 148
ADC input offset voltage (trimmed) VOFFSET -2 0 2 mV Trimmed 148
ADC differential nonlinearity (DNL) DNL -1 1 LSB f ADSMP = 62.5kHz 148
ADC differential nonlinearity (DNL) DNL -3.5 3.5 LSB f ADSMP = 500kHz 148
ADC integral nonlinearity (INL) INL -2 2 LSB f ADSMP = 62.5kHz 148
ADC integral nonlinearity (INL) INL -4 4 LSB f ADSMP = 500kHz 148
ADC no missing code (NMC) NMC 10 11 12 Bit f ADSMP = 62.5kHz 148
OPA operating voltage VOPA 2 5.5 V 148
OPA input offset voltage VOFFSET -15 15 mV VDD = 5V 148
Comparator operating voltage VCMP 2 5.5 V 149
Comparator input offset voltage VOFFSET -15 15 mV VDD = 5V, VCM = 0.5VDD 149
Comparator internal 4V reference voltage VIREF 3.92 4 4.08 V VDD = 5V 149
Comparator internal 3V reference voltage VIREF 2.94 3 3.06 V VDD = 5V 149
Comparator internal 2V reference voltage VIREF 1.96 2 2.04 V VDD = 5V 149
Flash memory supply voltage Vdd 1.8 5.5 V 149

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin 16. Modify ROM Programming Pin chapter description. Add MP5 Hardware Connecting, SN-Link ISP Programming and SN-Link ISP 6

CAD (KiCad official)

  • Symbol: SN8F5703TG
  • Footprint: Package_SO:TSSOP-24_4.4x7.8mm_P0.65mm
  • 3D model: TSSOP-24 (KiCad packages3D, STEP)
  • 3D model files: sn8f5703tg-etched.step / sn8f5703tg-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sn8f5703tg.step / sn8f5703tg.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: SONIX datasheet (177 pp, sha256 ac53db03daff76c5, retrieved 2026-10-28, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF