main
History Download
Ray Publish 0.1.0 fc59609

SN8F570310SG

SONIX · Microcontroller Units (MCUs/MPUs/SOCs) · SOP-16

SN8F570310SG from SONIX, in a SOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VSS power_in Ground (0 V) reference pin for the device.
2 P00/UTX/T2CC0/XIN bidirectional GPIO P0.0 shared with UART transmit (UTX), Timer 2 capture 0 input (T2CC0) and external clock input (XIN).
3 P01/URX/T2CC1/XOUT bidirectional GPIO P0.1 shared with UART receive (URX), Timer 2 capture 1 input (T2CC1) and crystal drive output (XOUT).
4 P02/INT1/RST bidirectional GPIO P0.2 shared with external interrupt 1 (INT1) and the active-low system reset input (RST).
5 P07/SCL/T2CC2 bidirectional GPIO P0.7 shared with I2C clock (SCL) and Timer 2 capture 2 input (T2CC2).
6 P10/SDA/T2CC3 bidirectional GPIO P1.0 shared with I2C data (SDA) and Timer 2 capture 3 input (T2CC3).
7 P11/T2 bidirectional GPIO P1.1 shared with the Timer 2 event counter input (T2).
8 P13/AIN10/OPO/CMO bidirectional GPIO P1.3 shared with ADC input channel 10 (AIN10), OP-amp output (OPO) and comparator output (CMO).
9 P14/AIN9/OPP/CMP bidirectional GPIO P1.4 shared with ADC input channel 9 (AIN9), OP-amp positive input (OPP) and comparator positive input (CMP).
10 P15/AIN8/OPN/CMN0 bidirectional GPIO P1.5 shared with ADC input channel 8 (AIN8), OP-amp negative input (OPN) and comparator negative input 0 (CMN0).
11 P24/AIN4/PWM11 bidirectional GPIO P2.4 shared with ADC input channel 4 (AIN4) and PWM output 11 (PWM11).
12 P23/AIN3/PWM20 bidirectional GPIO P2.3 shared with ADC input channel 3 (AIN3) and PWM output 20 (PWM20).
13 P22/AIN2/PWM10 bidirectional GPIO P2.2 shared with ADC input channel 2 (AIN2) and PWM output 10 (PWM10).
14 P21/AIN1/SWAT bidirectional GPIO P2.1 shared with ADC input channel 1 (AIN1) and the debug interface (SWAT).
15 P20/AIN0/INT0/AVREFH bidirectional GPIO P2.0 shared with ADC input channel 0 (AIN0), external interrupt 0 (INT0) and external ADC high reference voltage (AVREFH).
16 VDD power_in Power supply input for the device.

Key specifications

Parameter Value
Manufacturer SONIX
Package SOP-16
Category Single Chip Microcomputer/Microcontroller
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Voltage applied at VDD to VSS -0.3 6 V 146
Voltage applied at any pin to VSS -0.3 V upper limit printed as VDD+0.3V 146
Operating ambient temperature -40 85 °C 146
Storage ambient temperature -40 125 °C 146
Junction Temperature -40 125 °C 146
VDD Operating voltage VDD 1.8 5.5 V fcpu = 1MHz 146
STOP mode supply current IDD2 2.5 8.5 μA VDD = 3V 146
STOP mode supply current IDD2 3.2 9 μA VDD = 5V 146
Internal high clock generator frequency FIHRC 31.84 32 32.16 MHz VDD = 1.8V to 5.5V, 25°C 147
Internal high clock generator frequency FIHRC 31.68 31.99 MHz VDD = 1.8V to 5.5V, 25°C to 85°C 147
Internal high clock generator frequency FIHRC 32.31 32.64 MHz VDD = 1.8V to 5.5V, -40°C to 25°C 147
Internal low clock generator frequency FILRC 12 16 24 kHz VDD = 5.0V, 25°C 147
LVD18 detect voltage VLVD18 1.7 1.8 1.9 V 25°C 147
LVD18 detect voltage VLVD18 1.6 1.8 2 V -40°C to 85°C 147
I/O port input leakage current ILEKG 2 μA VIN = VDD 147
Pull-up resistor RUP 100 200 300 kΩ VDD = 3V 147
Pull-up resistor RUP 50 100 150 kΩ VDD = 5V 147
I/O output source current IOH 12 16 mA VDD = 5V, VO = VDD-0.5V 147
I/O sink current (P11-P17, P2) IOL1 15 20 mA VDD = 5V, VO = VSS+0.5V 147
I/O sink current (P0, P10) IOL2 80 100 mA VDD = 5V, VO = VSS+1.5V 147
ADC operating voltage VADC 2 5.5 V 148
Internal 4V reference voltage (ADC) VIREF 3.92 4 4.08 V VDD = 5V 148
Internal 3V reference voltage (ADC) VIREF 2.94 3 3.06 V VDD = 5V 148
Internal 2V reference voltage (ADC) VIREF 1.96 2 2.04 V VDD = 5V 148
ADC input offset voltage, non-trimmed VOFFSET -10 0 10 mV Non-trimmed 148
ADC input offset voltage, trimmed VOFFSET -2 0 2 mV Trimmed 148
ADC differential nonlinearity DNL -1 1 LSB f ADSMP = 62.5kHz 148
ADC differential nonlinearity DNL -3.5 3.5 LSB f ADSMP = 500kHz 148
ADC integral nonlinearity INL -2 2 LSB f ADSMP = 62.5kHz 148
ADC integral nonlinearity INL -4 4 LSB f ADSMP = 500kHz 148
OPA operating voltage VOPA 2 5.5 V 148
OPA input offset voltage VOFFSET -15 15 mV VDD = 5V 148
OPA power supply rejection ratio PSRR 50 70 dB VCM = VSS 148
Comparator operating voltage VCMP 2 5.5 V 149
Comparator input offset voltage VOFFSET -15 15 mV VDD = 5V, VCM = 0.5VDD 149
Internal 4V reference voltage (comparator) VIREF 3.92 4 4.08 V VDD = 5V 149
Internal 3V reference voltage (comparator) VIREF 2.94 3 3.06 V VDD = 5V 149
Internal 2V reference voltage (comparator) VIREF 1.96 2 2.04 V VDD = 5V 149
Flash supply voltage Vdd 1.8 5.5 V 149
Flash write current Iwrt 3 4 mA 25°C 149
Flash write time Twrt 6 8 ms Write 1 page=32 bytes, 25°C 149

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin 16. Modify ROM Programming Pin chapter description. Add MP5 Hardware Connecting, SN-Link ISP Programming and SN-Link ISP 6

CAD (KiCad official)

  • Symbol: SN8F570310SG
  • Footprint: Package_SO:SOIC-16_3.9x9.9mm_P1.27mm
  • 3D model: SOP-16 (KiCad packages3D, STEP)
  • 3D model files: sn8f570310sg-etched.step / sn8f570310sg-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sn8f570310sg.step / sn8f570310sg.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: SONIX datasheet (177 pp, sha256 ac53db03daff76c5, retrieved 2026-11-02, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF