3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownSN8F5701SG
SONIX · Microcontroller Units (MCUs/MPUs/SOCs) · SOIC-8
SN8F5701SG from SONIX, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Power supply pin; the supplied pages give no voltage range for this pin. |
| 2 | P00 (INT0/PWM0/AIN0) | bidirectional | GPIO with Schmitt-trigger input, built-in pull-up and level-change wake-up; also ADC input channel 0, programmable PWM0 output and external interrupt INT0. |
| 3 | P01 (INT1/PWM1/AIN1) | bidirectional | GPIO with Schmitt-trigger input, built-in pull-up and level-change wake-up; also ADC input channel 1, programmable PWM1 output and external interrupt INT1. |
| 4 | RST/URX/INT2/PWM2/AIN2/P02 | bidirectional | GPIO with Schmitt-trigger input, built-in pull-up and level-change wake-up; also system reset (active low), UART receive (URX), ADC input channel 2, PWM2 output and external interrupt INT2. |
| 5 | P03/AIN3/PWM3/UTX | bidirectional | GPIO with Schmitt-trigger input, built-in pull-up and level-change wake-up; also ADC input channel 3, programmable PWM3 output and UART transmit (UTX); no external interrupt on this pin. |
| 6 | P04/AIN4/PWM4/SWAT | bidirectional | GPIO with Schmitt-trigger input, built-in pull-up and level-change wake-up; also ADC input channel 4, programmable PWM4 output and debug interface SWAT; no external interrupt on this pin. |
| 7 | P05/AIN5/PWM5 | bidirectional | GPIO with Schmitt-trigger input, built-in pull-up and level-change wake-up; also ADC input channel 5 and programmable PWM5 output; no external interrupt on this pin. |
| 8 | VSS | power_in | Ground reference pin (0 V). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | SONIX |
| Package | SOIC-8 |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Voltage applied at VDD to VSS | VDD | -0.3 | 6 | V | Voltage applied at VDD to VSS | 100 | |
| Voltage applied at any pin to VSS | -0.3 | V | Printed upper limit is VDD+0.3V (not numeric) | 100 | |||
| Operating ambient temperature | -40 | 85 | °C | 100 | |||
| Storage ambient temperature | -40 | 125 | °C | 100 | |||
| Junction Temperature | -40 | 125 | °C | 100 | |||
| VDD Operating voltage | VDD | 1.8 | 5.5 | V | fcpu = 1MHz | 100 | |
| Normal mode supply current | IDD1 | 2.25 | mA | VDD = 3V, fcpu = 1MHz | 100 | ||
| Normal mode supply current | IDD1 | 2.3 | mA | VDD = 5V, fcpu = 1MHz | 100 | ||
| Normal mode supply current | IDD1 | 2.6 | mA | VDD = 3V, fcpu = 4MHz | 100 | ||
| Normal mode supply current | IDD1 | 2.65 | mA | VDD = 5V, fcpu = 4MHz | 100 | ||
| Normal mode supply current | IDD1 | 3.1 | mA | VDD = 3V, fcpu = 8MHz | 100 | ||
| Normal mode supply current | IDD1 | 3.15 | mA | VDD = 5V, fcpu = 8MHz | 100 | ||
| STOP mode supply current | IDD2 | 3 | 8.5 | μA | VDD = 3V | 100 | |
| STOP mode supply current | IDD2 | 3.5 | 9 | μA | VDD = 5V | 100 | |
| IDLE mode supply current | IDD3 | 0.55 | mA | fcpu = 1MHz; VDD = 3V, 32MHz IHRC | 100 | ||
| IDLE mode supply current | IDD3 | 0.6 | mA | fcpu = 1MHz; VDD = 5V, 32MHz IHRC | 100 | ||
| Internal high clock generator | FIHRC | 31.84 | 32 | 32.16 | MHz | VDD = 1.8V to 5.5V, 25°C | 100 |
| Internal high clock generator | FIHRC | 31.36 | 32 | 32.64 | MHz | VDD = 1.8V to 5.5V, -40°C to 85°C | 100 |
| Internal low clock generator | FILRC | 12 | 16 | 24 | kHz | VDD = 5V, 25°C | 100 |
| LVD18 detect voltage | VLVD18 | 1.7 | 1.8 | 1.9 | V | 25°C | 100 |
| LVD18 detect voltage | VLVD18 | 1.6 | 1.8 | 2 | V | -40°C to 85°C | 100 |
| I/O port input leakage current | ILEKG | 2 | μA | VIN = VDD | 101 | ||
| Pull-up resister | RUP | 100 | 200 | 300 | kΩ | VDD = 3V | 101 |
| Pull-up resister | RUP | 50 | 100 | 150 | kΩ | VDD = 5V | 101 |
| I/O output source current | IOH | 12 | 16 | mA | VDD = 5V, VO = VDD-0.5V | 101 | |
| I/O sink current | IOL | 15 | 20 | mA | VDD = 5V, VO = VSS+0.5V | 101 | |
| Operating voltage (ADC) | VADC | 2 | 5.5 | V | 102 | ||
| AIN channels input voltage | VAIN | 0 | V | VDD = 5V; printed max is VREFH (not numeric) | 102 | ||
| AVREFH pin input voltage | VREFH | 2 | V | VDD = 5V; printed max is VDD (not numeric) | 102 | ||
| Internal 4V reference voltage | VIREF | 3.92 | 4 | 4.08 | V | VDD = 5V | 102 |
| Internal 3V reference voltage | VIREF | 2.94 | 3 | 3.06 | V | VDD = 5V | 102 |
| Internal 2V reference voltage | VIREF | 1.96 | 2 | 2.04 | V | VDD = 5V | 102 |
| ADC current consumption | IAD | 0.45 | mA | VDD = 3V | 102 | ||
| ADC current consumption | IAD | 0.5 | mA | VDD = 5V | 102 | ||
| ADC clock | fADCLK | 32 | MHz | VDD = 5V | 102 | ||
| ADC sampling rate | fADSMP | 500 | kHz | VDD = 5V | 102 | ||
| ADC function enable period | tADEN | 100 | μs | VDD = 5V | 102 | ||
| Differential nonlinearity | DNL | -1 | 1 | LSB | f ADSMP = 62.5kHz; starred parameters: VDD = 3V, VREFH = 3V, 25°C | 102 | |
| Differential nonlinearity | DNL | -8 | 8 | LSB | f ADSMP = 500kHz; starred parameters: VDD = 3V, VREFH = 3V, 25°C | 102 | |
| Integral Nonlinearity | INL | -2 | 2 | LSB | f ADSMP = 62.5kHz; starred parameters: VDD = 3V, VREFH = 3V, 25°C | 102 | |
| Integral Nonlinearity | INL | -2.5 | 2.5 | LSB | f ADSMP = 250kHz; starred parameters: VDD = 3V, VREFH = 3V, 25°C | 102 | |
| Integral Nonlinearity | INL | -8 | 8 | LSB | f ADSMP = 500kHz; starred parameters: VDD = 3V, VREFH = 3V, 25°C | 102 | |
| No missing code | NMC | 10 | 11 | 12 | Bit | f ADSMP = 62.5kHz; starred parameters: VDD = 3V, VREFH = 3V, 25°C | 102 |
| No missing code | NMC | 11 | Bit | f ADSMP = 250kHz; starred parameters: VDD = 3V, VREFH = 3V, 25°C | 102 | ||
| No missing code | NMC | 8 | Bit | f ADSMP = 500kHz; starred parameters: VDD = 3V, VREFH = 3V, 25°C | 102 | ||
| Input offset voltage | VOFFSET | -10 | 0 | 10 | mV | Non-trimmed | 102 |
| Supply voltage (flash) | Vdd | 1.8 | 5.5 | V | 102 | ||
| Write current | Iwrt | 3 | 4 | mA | 25°C | 102 | |
| Write time | Twrt | 6 | 8 | ms | Write 1 page=32 bytes, 25°C | 102 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | The circuit below demonstrates the appropriate method to connect microcontroller’s SWAT pin and SN-Link3 Adapter. | 108 |
CAD (KiCad official)
- Symbol:
SN8F5701SG - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
sn8f5701sg-etched.step/sn8f5701sg-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn8f5701sg.step/sn8f5701sg.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: SONIX datasheet (125 pp, sha256
14a6b03f0f3b0407, retrieved 2026-10-28, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).