SN75LVCP601RTJR

{
  "schema_version": 1,
  "type": "component",
  "slug": "sn75lvcp601rtjr",
  "title": "SN75LVCP601RTJR",
  "brief": "Texas Instruments Signal Buffers, Repeaters, Splitters, QFN-20-EP(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "communication interface chip-uart-485-232",
    "sn75lvcp601rtjr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "SN75LVCP601RTJR",
    "manufacturer": "Texas Instruments",
    "package": "QFN-20-EP(4x4)",
    "pin_count": 21,
    "category": "Communication Interface Chip/UART/485/232",
    "subcategory": "Signal Buffers, Repeaters, Splitters",
    "datasheet": "https://www.ti.com/cn/lit/gpn/sn75lvcp601",
    "parts": {
      "symbol": "sn75lvcp601rtjr.kicad_sym",
      "footprint": "sn75lvcp601rtjr.kicad_mod",
      "model_3d": "sn75lvcp601rtjr-hero.glb",
      "model_3d_plain": "sn75lvcp601rtjr-etched.glb",
      "model_3d_step": "sn75lvcp601rtjr-etched.step",
      "model_3d_step_plain": "sn75lvcp601rtjr.step",
      "lbr": "sn75lvcp601rtjr.lbr"
    },
    "distributor_links": {
      "lcsc": "C544765",
      "digikey": "296-41655-2-ND",
      "mouser": "595-SN75LVCP601RTJR"
    },
    "distributor_check": {
      "checked_at": "2026-10-27T00:40:22Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-41655-2-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-SN75LVCP601RTJR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "RX1P",
        "type": "input",
        "description": "Noninverting CML differential input for CH1, connected to an internal voltage bias via a dual-termination resistor circuit."
      },
      {
        "number": "2",
        "name": "RX1N",
        "type": "input",
        "description": "Inverting CML differential input for CH1, connected to an internal voltage bias via a dual-termination resistor circuit."
      },
      {
        "number": "3",
        "name": "GND",
        "type": "power_in",
        "description": "Power supply ground."
      },
      {
        "number": "4",
        "name": "TX2N",
        "type": "output",
        "description": "Inverting VML differential output for CH2, connected internally to voltage bias via termination resistors."
      },
      {
        "number": "5",
        "name": "TX2P",
        "type": "output",
        "description": "Noninverting VML differential output for CH2, connected internally to voltage bias via termination resistors."
      },
      {
        "number": "6",
        "name": "DEW2",
        "type": "input",
        "description": "LVCMOS de-emphasis width control: 0 = short pulse duration, 1 = long pulse duration (default)."
      },
      {
        "number": "7",
        "name": "EN",
        "type": "input",
        "description": "LVCMOS device enable, internally pulled to VCC: 0 = standby mode, 1 = device enabled (default)."
      },
      {
        "number": "8",
        "name": "DE2",
        "type": "input",
        "description": "LVCMOS 3-state input that selects de-emphasis settings per Table 1, internally tied to VCC/2 (>200-kΩ pullup or pulldown)."
      },
      {
        "number": "9",
        "name": "DE1",
        "type": "input",
        "description": "LVCMOS 3-state input that selects de-emphasis settings per Table 1, internally tied to VCC/2 (>200-kΩ pullup or pulldown)."
      },
      {
        "number": "10",
        "name": "VCC",
        "type": "power_in",
        "description": "Positive supply, must be 3.3 V ± 10%."
      },
      {
        "number": "11",
        "name": "RX2P",
        "type": "input",
        "description": "Noninverting CML differential input for CH2, connected to an internal voltage bias via a dual-termination resistor circuit."
      },
      {
        "number": "12",
        "name": "RX2N",
        "type": "input",
        "description": "Inverting CML differential input for CH2, connected to an internal voltage bias via a dual-termination resistor circuit."
      },
      {
        "number": "13",
        "name": "GND",
        "type": "power_in",
        "description": "Power supply ground."
      },
      {
        "number": "14",
        "name": "TX1N",
        "type": "output",
        "description": "Inverting VML differential output for CH1, connected internally to voltage bias via termination resistors."
      },
      {
        "number": "15",
        "name": "TX1P",
        "type": "output",
        "description": "Noninverting VML differential output for CH1, connected internally to voltage bias via termination resistors."
      },
      {
        "number": "16",
        "name": "DEW1",
        "type": "input",
        "description": "LVCMOS de-emphasis width control: 0 = short pulse duration, 1 = long pulse duration (default)."
      },
      {
        "number": "17",
        "name": "EQ1",
        "type": "input",
        "description": "LVCMOS 3-state input that selects equalization settings per Table 1, internally tied to VCC/2 (>200-kΩ pullup or pulldown)."
      },
      {
        "number": "18",
        "name": "GND",
        "type": "power_in",
        "description": "Power supply ground."
      },
      {
        "number": "19",
        "name": "EQ2",
        "type": "input",
        "description": "LVCMOS 3-state input that selects equalization settings per Table 1, internally tied to VCC/2 (>200-kΩ pullup or pulldown)."
      },
      {
        "number": "20",
        "name": "VCC",
        "type": "power_in",
        "description": "Positive supply, must be 3.3 V ± 10%."
      },
      {
        "number": "21",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-sonnet-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pin Configuration heading on page 4 says '16-Pin WQFN' but the pin table, thermal table and orderabl; Thermal pad has no printed pin number; the figure says it must be soldered to the PCB GND plane. It ; The page 4 table text is garbled for DEW1/DEW2 and DE1/DE2 or EQ1/EQ2 (shared descriptions). Pin num"
        ],
        "pages_sent": 8,
        "cost_usd": 0.1096,
        "at": "2026-10-27T00:39:50"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/sn75lvcp601",
        "pages": 35,
        "sha256": "5a7c2e15ad114f17",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 21,
        "described": 21,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "sn75lvcp601rtjr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4,
          4,
          0.77
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "c9476a1612023de37f27b4972110ab6ac6dc0eaf5ac48957a2e1c497650082a5",
        "checked": "2026-10-27",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "sn75lvcp601rtjr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4,
          4,
          0.77
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "6e882166c964845337da949081d3b85aaa3431f6f5e92cea9fa51910f8bc9228",
        "checked": "2026-10-27",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "QFN-20-EP(4x4)",
      "Category": "Communication Interface Chip/UART/485/232",
      "Pins": "21"
    },
    "characteristics": {
      "version": 1,
      "source": "datasheet",
      "datasheet_sha256": "5a7c2e15ad114f17e5d11e5169868a5c4a2ccc85fb22bf025471008434f71f18",
      "rows": [
        {
          "name": "Supply voltage range",
          "symbol": "VCC",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.5,
          "typ": null,
          "max": 4,
          "conditions": "",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Differential I/O voltage range",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.5,
          "typ": null,
          "max": 4,
          "conditions": "",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Storage temperature",
          "symbol": "Tstg",
          "kind": "absolute_maximum",
          "unit": "°C",
          "min": null,
          "typ": null,
          "max": 150,
          "conditions": "",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "ESD HBM",
          "symbol": "V(ESD)",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -10000,
          "typ": null,
          "max": 10000,
          "conditions": "Human body model per ANSI/ESDA/JEDEC JS-001",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "ESD CDM",
          "symbol": "V(ESD)",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -1500,
          "typ": null,
          "max": 1500,
          "conditions": "Charged-device model per JESD22-C101",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "ESD Machine model",
          "symbol": "V(ESD)",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -200,
          "typ": null,
          "max": 200,
          "conditions": "Machine model",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Supply voltage",
          "symbol": "VCC",
          "kind": "recommended_operating",
          "unit": "V",
          "min": 3,
          "typ": 3.3,
          "max": 3.6,
          "conditions": "",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Coupling capacitor",
          "symbol": "CCOUPLING",
          "kind": "recommended_operating",
          "unit": "nF",
          "min": null,
          "typ": null,
          "max": 12,
          "conditions": "",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Operating free-air temperature",
          "symbol": "TA",
          "kind": "recommended_operating",
          "unit": "°C",
          "min": 0,
          "typ": null,
          "max": 85,
          "conditions": "",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Junction-to-ambient thermal resistance",
          "symbol": "RθJA",
          "kind": "thermal",
          "unit": "°C/W",
          "min": null,
          "typ": 38,
          "max": null,
          "conditions": "RTJ (WQFN) 20 pins",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Junction-to-case (top) thermal resistance",
          "symbol": "RθJC(top)",
          "kind": "thermal",
          "unit": "°C/W",
          "min": null,
          "typ": 40,
          "max": null,
          "conditions": "",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Junction-to-board thermal resistance",
          "symbol": "RθJB",
          "kind": "thermal",
          "unit": "°C/W",
          "min": null,
          "typ": 10,
          "max": null,
          "conditions": "",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Junction-to-case (bottom) thermal resistance",
          "symbol": "RθJC(bot)",
          "kind": "thermal",
          "unit": "°C/W",
          "min": null,
          "typ": 15.2,
          "max": null,
          "conditions": "",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Power dissipation in active mode",
          "symbol": "PD",
          "kind": "electrical",
          "unit": "mW",
          "min": null,
          "typ": 215,
          "max": 288,
          "conditions": "DEWx = EN = VCC, EQx = DEx = NC, K28.5 pattern at 6 Gbps, VID = 700 mVp-p",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Power dissipation in standby mode",
          "symbol": "PSD",
          "kind": "electrical",
          "unit": "mW",
          "min": null,
          "typ": null,
          "max": 5,
          "conditions": "EN = 0 V, DEWx = EQx = DEx = NC, K28.5 pattern at 6 Gbps, VID = 700 mVp-p",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Active-mode supply current",
          "symbol": "ICC",
          "kind": "electrical",
          "unit": "mA",
          "min": null,
          "typ": 65,
          "max": 80,
          "conditions": "EN = 3.3 V, DEWx = 0 V, EQx = DEx = NC, K28.5 pattern at 6 Gbps, VID = 700 mVp-p",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Active power-save mode ICC",
          "symbol": "ICC_ALP",
          "kind": "electrical",
          "unit": "mA",
          "min": null,
          "typ": 6.5,
          "max": 10,
          "conditions": "When device is enabled and auto low-power conditions are met",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Standby mode supply current",
          "symbol": "ICC_STDBY",
          "kind": "electrical",
          "unit": "mA",
          "min": null,
          "typ": null,
          "max": 1,
          "conditions": "EN = 0 V",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Data rate",
          "symbol": "",
          "kind": "electrical",
          "unit": "Gbps",
          "min": 1,
          "typ": null,
          "max": 6,
          "conditions": "Maximum data rate",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Input OOB threshold",
          "symbol": "VOOB",
          "kind": "electrical",
          "unit": "mVpp",
          "min": 50,
          "typ": 78,
          "max": 150,
          "conditions": "f = 750 MHz",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "OOB differential delta",
          "symbol": "DVdiffOOB",
          "kind": "electrical",
          "unit": "mV",
          "min": null,
          "typ": null,
          "max": 25,
          "conditions": "",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "OOB common-mode delta",
          "symbol": "DVCMOOB",
          "kind": "electrical",
          "unit": "mV",
          "min": null,
          "typ": null,
          "max": 50,
          "conditions": "",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Input high voltage",
          "symbol": "VIH",
          "kind": "electrical",
          "unit": "V",
          "min": 1.4,
          "typ": null,
          "max": null,
          "conditions": "For all control pins",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Input low voltage",
          "symbol": "VIL",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 0.5,
          "conditions": "For all control pins",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Input hysteresis",
          "symbol": "VINHYS",
          "kind": "electrical",
          "unit": "mV",
          "min": null,
          "typ": 115,
          "max": null,
          "conditions": "",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "High-level input current (EQx, DEx)",
          "symbol": "IIH",
          "kind": "electrical",
          "unit": "µA",
          "min": null,
          "typ": null,
          "max": 30,
          "conditions": "EQx, DEx = VCC",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "High-level input current (EN, DEWx)",
          "symbol": "IIH",
          "kind": "electrical",
          "unit": "µA",
          "min": null,
          "typ": null,
          "max": 1,
          "conditions": "EN, DEWx = VCC",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Low-level input current (EQx, DEx)",
          "symbol": "IIL",
          "kind": "electrical",
          "unit": "µA",
          "min": -30,
          "typ": null,
          "max": null,
          "conditions": "EQx, DEx = GND",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Low-level input current (EN, DEWx)",
          "symbol": "IIL",
          "kind": "electrical",
          "unit": "µA",
          "min": -10,
          "typ": null,
          "max": null,
          "conditions": "EN, DEWx = GND",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Receiver differential-input impedance",
          "symbol": "ZDIFFRX",
          "kind": "electrical",
          "unit": "Ω",
          "min": 85,
          "typ": 100,
          "max": 115,
          "conditions": "",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Receiver single-ended input impedance",
          "symbol": "ZSERX",
          "kind": "electrical",
          "unit": "Ω",
          "min": 40,
          "typ": null,
          "max": null,
          "conditions": "",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Receiver common-mode voltage",
          "symbol": "VCMRX",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": 1.8,
          "max": null,
          "conditions": "",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Differential input voltage PP",
          "symbol": "VdiffRX",
          "kind": "electrical",
          "unit": "mVppd",
          "min": 120,
          "typ": null,
          "max": 1600,
          "conditions": "f = 1.5 GHz and 3 GHz",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Transmitter pair differential impedance",
          "symbol": "ZdiffTX",
          "kind": "electrical",
          "unit": "Ω",
          "min": 85,
          "typ": 100,
          "max": 122,
          "conditions": "",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "Transmitter single-ended impedance",
          "symbol": "ZSETX",
          "kind": "electrical",
          "unit": "Ω",
          "min": 40,
          "typ": null,
          "max": null,
          "conditions": "",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "Sequencing transient voltage",
          "symbol": "VTXtrans",
          "kind": "electrical",
          "unit": "V",
          "min": -1.2,
          "typ": null,
          "max": 1.2,
          "conditions": "Transient voltages on the serial data bus during power sequencing (lab load)",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "Output de-emphasis, DE = 1",
          "symbol": "DE",
          "kind": "electrical",
          "unit": "dB",
          "min": null,
          "typ": -2,
          "max": null,
          "conditions": "f = 3 GHz, DE1 or DE2 = 1",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "Output de-emphasis, DE = NC",
          "symbol": "DE",
          "kind": "electrical",
          "unit": "dB",
          "min": null,
          "typ": -4,
          "max": null,
          "conditions": "f = 3 GHz, DE1 or DE2 = NC",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "Differential output swing dc level, DE = 0",
          "symbol": "DiffVppTX_DE",
          "kind": "electrical",
          "unit": "mV",
          "min": null,
          "typ": 550,
          "max": null,
          "conditions": "f = 3 GHz, DE1 or DE2 = 0",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "Differential output swing dc level, DE = 1",
          "symbol": "DiffVppTX_DE",
          "kind": "electrical",
          "unit": "mV",
          "min": null,
          "typ": 830,
          "max": null,
          "conditions": "f = 3 GHz, DE1 or DE2 = 1",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "Differential output swing dc level, DE = NC",
          "symbol": "DiffVppTX_DE",
          "kind": "electrical",
          "unit": "mV",
          "min": null,
          "typ": 630,
          "max": null,
          "conditions": "f = 3 GHz, DE1or DE2 = NC",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "Transmitter common-mode voltage",
          "symbol": "VCMTX",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": 1.8,
          "max": null,
          "conditions": "",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "TX rise-fall imbalance",
          "symbol": "TxR/FImb",
          "kind": "electrical",
          "unit": "%",
          "min": null,
          "typ": 6,
          "max": 20,
          "conditions": "At 3 Gbps",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "TX amplitude imbalance",
          "symbol": "TxAmpImb",
          "kind": "electrical",
          "unit": "%",
          "min": null,
          "typ": 2,
          "max": 10,
          "conditions": "",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "Auto low-power entry time",
          "symbol": "AutoLPENTRY",
          "kind": "timing",
          "unit": "µs",
          "min": 80,
          "typ": 105,
          "max": 130,
          "conditions": "Electrical idle at input (see Figure 4)",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Auto low-power exit time",
          "symbol": "AutoLPEXIT",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": 42,
          "max": 50,
          "conditions": "After first signal activity (see Figure 4)",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "De-emphasis duration, DEW = 0",
          "symbol": "tDE",
          "kind": "timing",
          "unit": "ps",
          "min": null,
          "typ": 94,
          "max": null,
          "conditions": "DEW1 or DEW2 = 0",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "De-emphasis duration, DEW = 1",
          "symbol": "tDE",
          "kind": "timing",
          "unit": "ps",
          "min": null,
          "typ": 215,
          "max": null,
          "conditions": "DEW1 or DEW2 = 1",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "OOB mode enter",
          "symbol": "tOOB1",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": 3,
          "max": 5,
          "conditions": "See Figure 4",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "OOB mode exit",
          "symbol": "tOOB2",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": 3,
          "max": 5,
          "conditions": "See Figure 4",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Propagation delay",
          "symbol": "tPDelay",
          "kind": "timing",
          "unit": "ps",
          "min": null,
          "typ": 323,
          "max": 400,
          "conditions": "Measured using K28.5 pattern (see Figure 2)",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Device enable time",
          "symbol": "tENB",
          "kind": "timing",
          "unit": "µs",
          "min": null,
          "typ": null,
          "max": 5,
          "conditions": "EN 0 → 1",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Device disable time",
          "symbol": "tDIS",
          "kind": "timing",
          "unit": "µs",
          "min": null,
          "typ": null,
          "max": 2,
          "conditions": "EN 1 → 0",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Receiver rise/fall time",
          "symbol": "t20-80RX",
          "kind": "timing",
          "unit": "ps",
          "min": null,
          "typ": 62,
          "max": 75,
          "conditions": "20% to 80%, SATA 6-Gbps, measured 1 in (2.5 cm) from device pin",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Receiver differential skew",
          "symbol": "tskewRX",
          "kind": "timing",
          "unit": "ps",
          "min": null,
          "typ": null,
          "max": 30,
          "conditions": "",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Transmitter rise/fall time",
          "symbol": "t20-80TX",
          "kind": "timing",
          "unit": "ps",
          "min": 42,
          "typ": 55,
          "max": 75,
          "conditions": "20% to 80%, at 6 Gbps under no load conditions",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Transmitter differential skew",
          "symbol": "tskewTX",
          "kind": "timing",
          "unit": "ps",
          "min": null,
          "typ": 6,
          "max": 20,
          "conditions": "",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Deterministic jitter",
          "symbol": "DJTX",
          "kind": "timing",
          "unit": "UIp-p",
          "min": null,
          "typ": 0.06,
          "max": 0.07,
          "conditions": "VID = 500 mVpp, UI = 333 ps, K28.5 control character",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Residual random jitter",
          "symbol": "RJTX",
          "kind": "timing",
          "unit": "ps-rms",
          "min": null,
          "typ": 0.01,
          "max": 2,
          "conditions": "VID = 500 mVpp, UI = 333 ps, K28.7 control character",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Deterministic jitter",
          "symbol": "DJTX",
          "kind": "timing",
          "unit": "UIp-p",
          "min": null,
          "typ": 0.08,
          "max": 0.16,
          "conditions": "VID = 500 mVpp, UI = 167 ps, K28.5 control character",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Residual random jitter",
          "symbol": "RJTX",
          "kind": "timing",
          "unit": "ps-rms",
          "min": null,
          "typ": 0.09,
          "max": 2,
          "conditions": "VID = 500 mVpp, UI = 167 ps, K28.7 control character",
          "source_page": 8,
          "source": "datasheet"
        }
      ]
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "sn75lvcp601rtjr"
  ],
  "discovery_pitch": "SN75LVCP601RTJR (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray",
    "email": "[email protected]"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "sn75lvcp601rtjr.kicad_sym",
    "sn75lvcp601rtjr.kicad_mod",
    "sn75lvcp601rtjr.glb",
    "sn75lvcp601rtjr.step",
    "sn75lvcp601rtjr.lbr",
    "docs/hero.png",
    "docs/sn75lvcp601rtjr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "sn75lvcp601rtjr-hero.glb",
    "sn75lvcp601rtjr-hero.overlay.json",
    "sn75lvcp601rtjr-etched.glb"
  ],
  "visibility": {
    "public": true
  }
}