main
Ray
Publish 0.1.0
df84f7f
SN75C3232DBR
Texas Instruments · RS232 ICs · SSOP-16-208mil
SN75C3232DBR from Texas Instruments, in a SSOP-16-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | C1+ | passive | Positive lead of the C1 charge-pump capacitor; Table 9-1 gives C1 = 0.1 µF for 3.3 V ±0.3 V and 0.047 µF for 5 V ±0.5 V. |
| 2 | V+ | power_out | Positive charge-pump output for the storage capacitor only; it is not intended as an external supply, and absolute maximum V+ is −0.3 V to 7 V with respect to network GND. |
| 3 | C1- | passive | Negative lead of the C1 charge-pump capacitor. |
| 4 | C2+ | passive | Positive lead of the C2 charge-pump capacitor; Table 9-1 gives C2 = 0.1 µF at 3.3 V and 0.33 µF at 5 V. |
| 5 | C2- | passive | Negative lead of the C2 charge-pump capacitor. |
| 6 | V- | power_out | Negative charge-pump output for the storage capacitor only; absolute maximum V− is −7 V to 0.3 V with respect to network GND. |
| 7 | DOUT2 | output | RS-232 line data output to the remote RS-232 system; driver outputs are protected against shorts to ground and rated ±13.2 V absolute maximum. |
| 8 | RIN2 | input | RS-232 line data input from the remote RS-232 system; receiver input range is −25 V to 25 V and each input includes an internal standard RS-232 load. |
| 9 | ROUT2 | output | Logic data output to the UART; an open RIN2 input produces a high level on this output. |
| 10 | DIN2 | input | Logic data input from the UART; high-level input is 2 V minimum at VCC = 3.3 V or 2.4 V minimum at VCC = 5 V, low-level input is 0.8 V maximum, and all DIN inputs must be held at valid logic levels. |
| 11 | DIN1 | input | Logic data input from the UART; high-level input is 2 V minimum at VCC = 3.3 V or 2.4 V minimum at VCC = 5 V, low-level input is 0.8 V maximum, and all DIN inputs must be held at valid logic levels. |
| 12 | ROUT1 | output | Logic data output to the UART; an open RIN1 input produces a high level on this output. |
| 13 | RIN1 | input | RS-232 line data input from the remote RS-232 system; receiver input range is −25 V to 25 V and each input includes an internal standard RS-232 load. |
| 14 | DOUT1 | output | RS-232 line data output to the remote RS-232 system; driver outputs are protected against shorts to ground and rated ±13.2 V absolute maximum. |
| 15 | GND | power_in | Ground reference for the device; all voltages are referenced to network GND. |
| 16 | VCC | power_in | Supply voltage input, connected to an external 3 V to 5.5 V power supply (recommended 3.3 V or 5 V). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SSOP-16-208mil |
| Category | Interface |
| Pins | 16 |
CAD (KiCad official)
- Symbol:
SN75C3232DBR - Footprint:
Package_SO:SSOP-16_5.3x6.2mm_P0.65mm - 3D model: SSOP-16-208mil (KiCad packages3D, STEP)
- 3D model files:
sn75c3232dbr-etched.step/sn75c3232dbr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn75c3232dbr.step/sn75c3232dbr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (33 pp, sha256
1148f8763bbf77a1, retrieved 2026-10-12, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# SN75C3232DBR
**Texas Instruments** · RS232 ICs · SSOP-16-208mil
SN75C3232DBR from Texas Instruments, in a SSOP-16-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | C1+ | passive | Positive lead of the C1 charge-pump capacitor; Table 9-1 gives C1 = 0.1 µF for 3.3 V ±0.3 V and 0.047 µF for 5 V ±0.5 V. |
| 2 | V+ | power_out | Positive charge-pump output for the storage capacitor only; it is not intended as an external supply, and absolute maximum V+ is −0.3 V to 7 V with respect to network GND. |
| 3 | C1- | passive | Negative lead of the C1 charge-pump capacitor. |
| 4 | C2+ | passive | Positive lead of the C2 charge-pump capacitor; Table 9-1 gives C2 = 0.1 µF at 3.3 V and 0.33 µF at 5 V. |
| 5 | C2- | passive | Negative lead of the C2 charge-pump capacitor. |
| 6 | V- | power_out | Negative charge-pump output for the storage capacitor only; absolute maximum V− is −7 V to 0.3 V with respect to network GND. |
| 7 | DOUT2 | output | RS-232 line data output to the remote RS-232 system; driver outputs are protected against shorts to ground and rated ±13.2 V absolute maximum. |
| 8 | RIN2 | input | RS-232 line data input from the remote RS-232 system; receiver input range is −25 V to 25 V and each input includes an internal standard RS-232 load. |
| 9 | ROUT2 | output | Logic data output to the UART; an open RIN2 input produces a high level on this output. |
| 10 | DIN2 | input | Logic data input from the UART; high-level input is 2 V minimum at VCC = 3.3 V or 2.4 V minimum at VCC = 5 V, low-level input is 0.8 V maximum, and all DIN inputs must be held at valid logic levels. |
| 11 | DIN1 | input | Logic data input from the UART; high-level input is 2 V minimum at VCC = 3.3 V or 2.4 V minimum at VCC = 5 V, low-level input is 0.8 V maximum, and all DIN inputs must be held at valid logic levels. |
| 12 | ROUT1 | output | Logic data output to the UART; an open RIN1 input produces a high level on this output. |
| 13 | RIN1 | input | RS-232 line data input from the remote RS-232 system; receiver input range is −25 V to 25 V and each input includes an internal standard RS-232 load. |
| 14 | DOUT1 | output | RS-232 line data output to the remote RS-232 system; driver outputs are protected against shorts to ground and rated ±13.2 V absolute maximum. |
| 15 | GND | power_in | Ground reference for the device; all voltages are referenced to network GND. |
| 16 | VCC | power_in | Supply voltage input, connected to an external 3 V to 5.5 V power supply (recommended 3.3 V or 5 V). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SSOP-16-208mil |
| Category | Interface |
| Pins | 16 |
## CAD (KiCad official)
- Symbol: `SN75C3232DBR`
- Footprint: `Package_SO:SSOP-16_5.3x6.2mm_P0.65mm`
- 3D model: SSOP-16-208mil (KiCad packages3D, STEP)
- 3D model files: `sn75c3232dbr-etched.step` / `sn75c3232dbr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sn75c3232dbr.step` / `sn75c3232dbr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/sn75c3232) (33 pp, sha256 `1148f8763bbf77a1`, retrieved 2026-10-12, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/sn75c3232dbr-datasheet.pdf)