Generated by kicad-footprint-generator · KiCad file format 20260206
SN75C189ADR
Texas Instruments · RS232 ICs · SOIC-14
SN75C189ADR from Texas Instruments, in a SOIC-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1A | input | Receiver 1 input; recommended input voltage range is -25 V to 25 V, and the output goes high if the input is open or shorted to ground. |
| 2 | 1 CONT | passive | Response-control terminal for receiver 1; recommended response-control current is ±1 mA, and an external capacitor to ground adds input noise filtering. |
| 3 | 1Y | output | Receiver 1 push-pull output; recommended IOH is -3.2 mA and IOL is 3.2 mA. |
| 4 | 2A | input | Receiver 2 input; recommended input voltage range is -25 V to 25 V, and the output goes high if the input is open or shorted to ground. |
| 5 | 2 CONT | passive | Response-control terminal for receiver 2; recommended response-control current is ±1 mA, and an external capacitor to ground adds input noise filtering. |
| 6 | 2Y | output | Receiver 2 push-pull output; recommended IOH is -3.2 mA and IOL is 3.2 mA. |
| 7 | GND | power_in | Network ground; all voltages are referenced to this terminal. |
| 8 | 3Y | output | Receiver 3 push-pull output; recommended IOH is -3.2 mA and IOL is 3.2 mA. |
| 9 | 3 CONT | passive | Response-control terminal for receiver 3; recommended response-control current is ±1 mA, and an external capacitor to ground adds input noise filtering. |
| 10 | 3A | input | Receiver 3 input; recommended input voltage range is -25 V to 25 V, and the output goes high if the input is open or shorted to ground. |
| 11 | 4Y | output | Receiver 4 push-pull output; recommended IOH is -3.2 mA and IOL is 3.2 mA. |
| 12 | 4 CONT | passive | Response-control terminal for receiver 4; recommended response-control current is ±1 mA, and an external capacitor to ground adds input noise filtering. |
| 13 | 4A | input | Receiver 4 input; recommended input voltage range is -25 V to 25 V, and the output goes high if the input is open or shorted to ground. |
| 14 | VCC | power_in | Supply voltage, 4.5 V to 6 V with 5 V nominal. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-14 |
| Category | Interface |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | 4.5 | 5 | 6 | V | 3 | |
| Input voltage | VI | -25 | 25 | V | See Note 3 | 3 | |
| High-level output current | IOH | -3.2 | mA | 3 | |||
| Low-level output current | IOL | 3.2 | mA | 3 | |||
| Response-control current | -1 | 1 | mA | 3 | |||
| Operating free-air temperature | TA | 0 | 70 | °C | 3 | ||
| Supply voltage | VCC | 7 | V | All voltages with respect to network GND | 2 | ||
| Input voltage range | VI | -30 | 30 | V | 2 | ||
| Output voltage range | VO | -0.3 | V | Upper limit VCC + 0.3 V | 2 | ||
| Package thermal impedance, D package | θJA | 86 | °C/W | D package, JESD 51 | 2 | ||
| Lead temperature | 260 | °C | 1,6 mm (1/16 inch) from case for 10 seconds | 2 | |||
| Storage temperature range | Tstg | -65 | 150 | °C | 2 | ||
| Positive-going input threshold voltage (’C189A) | VIT+ | 1.6 | 2.25 | V | See Figure 1 | 3 | |
| Negative-going input threshold voltage (’C189A) | VIT- | 0.75 | 1 | 1.25 | V | See Figure 1 | 3 |
| Input hysteresis voltage (VIT+, VIT-) (’C189A) | Vhys | 0.65 | 0.97 | V | See Figure 1 | 3 | |
| High-level output voltage | VOH | 3.5 | V | VCC = 4.5 V to 6 V, VI = 0.75 V, IOH = -20 µA | 3 | ||
| High-level output voltage | VOH | 2.5 | V | VCC = 4.5 V to 6 V, IOH = -3.2 mA, VI = 0.75 V | 3 | ||
| Low-level output voltage | VOL | 0.4 | V | VCC = 4.5 V to 6 V, VI = 3 V, IOL = 3.2 mA | 3 | ||
| High-level input current | IIH | 3.6 | 8.3 | mA | See Figure 2, VI = 25 V | 3 | |
| High-level input current | IIH | 0.43 | 1 | mA | See Figure 2, VI = 3 V | 3 | |
| Low-level input current | IIL | -3.6 | -8.3 | mA | See Figure 2, VI = -25 V | 3 | |
| Low-level input current | IIL | -0.43 | -1 | mA | See Figure 2, VI = -3 V | 3 | |
| Short-circuit output current | IOS | -35 | mA | See Figure 3 | 3 | ||
| Supply current | ICC | 420 | 700 | µA | VI = 5 V, See Figure 2, No load | 3 | |
| Propagation delay time, low- to high-level output | tPLH | 6 | µs | 3 | |||
| Propagation delay time, high- to low-level output | tPHL | 6 | µs | 3 | |||
| Transition time, low- to high-level output | tTLH | 500 | ns | RL = 5 kΩ, CL = 50 pF, See Figure 4 | 3 | ||
| Transition time, high- to low-level output | tTHL | 300 | ns | RL = 5 kΩ, CL = 50 pF, See Figure 4 | 3 | ||
| Duration of longest pulse rejected as noise | tw(N) | 1 | 6 | µs | 3 |
CAD (KiCad official)
- Symbol:
SN75C189ADR - Footprint:
Package_SO:SOIC-14_3.9x8.7mm_P1.27mm - 3D model: SOIC-14 (KiCad packages3D, STEP)
- 3D model files:
sn75c189adr-etched.step/sn75c189adr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn75c189adr.step/sn75c189adr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (24 pp, sha256
4d415b3c312c0209, retrieved 2026-11-05, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).