component
SN75176B
Public Made by Adomby adom
TI differential bus transceiver, SOIC-8. RS-485/RS-422, up to 32 nodes, driver + receiver with enables. Datasheet-verified.
← Commit history
sn75176b: backfill missing artifacts (etch, variants)
3 files changed
+22405−6
diff truncated
README.md+2@@ -32,6 +32,8 @@ A differential bus transceiver for RS-485 and RS-422 multipoint networks, in SOI ## Ordering variants +Same part, different packaging or reel option.+ - `SN75176BD (SOIC-8)` - `SN75176BP (PDIP-8)`
page.json+17−6@@ -35,25 +35,25 @@ "number": "1", "name": "R", "type": "output",- "description": "Receiver logic data output. Presents the demodulated single-ended logic level from the differential RS-485 bus (A minus B). High-impedance (tri-state) when RE is deasserted (logic high). VOH \u2265 2.7 V at IOH = -400 \u00b5A; VOL \u2264 0.45 V at IOL = 8 mA."+ "description": "Receiver logic data output. Presents the demodulated single-ended logic level from the differential RS-485 bus (A minus B). High-impedance (tri-state) when RE is deasserted (logic high). VOH ≥ 2.7 V at IOH = -400 µA; VOL ≤ 0.45 V at IOL = 8 mA." }, { "number": "2", "name": "RE", "type": "input",- "description": "Receiver enable, active low. Drive low (VIL \u2264 0.8 V) to enable the receiver output R; drive high (VIH \u2265 2 V) to force R into the high-impedance state. Typically tied to DE (or its inverse) to form a direction-control pin."+ "description": "Receiver enable, active low. Drive low (VIL ≤ 0.8 V) to enable the receiver output R; drive high (VIH ≥ 2 V) to force R into the high-impedance state. Typically tied to DE (or its inverse) to form a direction-control pin." }, { "number": "3", "name": "DE", "type": "input",- "description": "Driver enable, active high. Drive high (VIH \u2265 2 V) to enable the differential driver onto A/B; drive low (VIL \u2264 0.8 V) to place the driver outputs in the high-impedance state so the bus can be shared by other transceivers."+ "description": "Driver enable, active high. Drive high (VIH ≥ 2 V) to enable the differential driver onto A/B; drive low (VIL ≤ 0.8 V) to place the driver outputs in the high-impedance state so the bus can be shared by other transceivers." }, { "number": "4", "name": "D", "type": "input",- "description": "Driver logic data input. Single-ended TTL/CMOS-compatible logic level that is transmitted differentially onto the A/B bus lines when DE is asserted high. VIH \u2265 2 V, VIL \u2264 0.8 V."+ "description": "Driver logic data input. Single-ended TTL/CMOS-compatible logic level that is transmitted differentially onto the A/B bus lines when DE is asserted high. VIH ≥ 2 V, VIL ≤ 0.8 V." }, { "number": "5",@@ -77,7 +77,7 @@ "number": "8", "name": "VCC", "type": "power_in",- "description": "Positive supply input, 5 V nominal (4.75 V to 5.25 V recommended, 7 V absolute max). Bypass with a 0.1 \u00b5F ceramic capacitor to GND close to the pin. ICC \u2248 42 mA typ (outputs enabled), 26 mA typ (outputs disabled)."+ "description": "Positive supply input, 5 V nominal (4.75 V to 5.25 V recommended, 7 V absolute max). Bypass with a 0.1 µF ceramic capacitor to GND close to the pin. ICC ≈ 42 mA typ (outputs enabled), 26 mA typ (outputs disabled)." } ], "provenance": {@@ -147,6 +147,17 @@ "docs/hero.png", "docs/sn75176b-datasheet.pdf", "viewers/symbol.html",- "viewers/footprint.html"+ "viewers/footprint.html",+ "sn75176b-etched.step"+ ],+ "variants": [+ {+ "mpn": "SN75176BD (SOIC-8)",+ "kind": "packaging"+ },+ {+ "mpn": "SN75176BP (PDIP-8)",+ "kind": "packaging"+ } ] }
sn75176b-etched.stepadded+22386@@ -0,0 +1,39524 @@+ISO-10303-21;+HEADER;+FILE_DESCRIPTION(('Open CASCADE Model'),'2;1');+FILE_NAME('Open CASCADE Shape Model','2026-09-03T23:53:36',('Author'),(+ 'Open CASCADE'),'Open CASCADE STEP processor 7.9','Open CASCADE 7.9'+ ,'Unknown');+FILE_SCHEMA(('AUTOMOTIVE_DESIGN { 1 0 10303 214 1 1 1 1 }'));+ENDSEC;+DATA;+#1 = APPLICATION_PROTOCOL_DEFINITION('international standard',+ 'automotive_design',2000,#2);+#2 = APPLICATION_CONTEXT(+ 'core data for automotive mechanical design processes');+#3 = SHAPE_DEFINITION_REPRESENTATION(#4,#10);+#4 = PRODUCT_DEFINITION_SHAPE('','',#5);+#5 = PRODUCT_DEFINITION('design','',#6,#9);+#6 = PRODUCT_DEFINITION_FORMATION('','',#7);+#7 = PRODUCT('part','part','',(#8));+#8 = PRODUCT_CONTEXT('',#2,'mechanical');+#9 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');+#10 = SHAPE_REPRESENTATION('',(#11,#15,#19),#23);+#11 = AXIS2_PLACEMENT_3D('',#12,#13,#14);+#12 = CARTESIAN_POINT('',(0.,0.,0.));+#13 = DIRECTION('',(0.,0.,1.));+#14 = DIRECTION('',(1.,0.,-0.));+#15 = AXIS2_PLACEMENT_3D('',#16,#17,#18);+#16 = CARTESIAN_POINT('',(0.,0.,0.));+#17 = DIRECTION('',(0.,0.,1.));+#18 = DIRECTION('',(1.,0.,-0.));+#19 = AXIS2_PLACEMENT_3D('',#20,#21,#22);+#20 = CARTESIAN_POINT('',(0.,0.,0.));+#21 = DIRECTION('',(0.,0.,1.));+#22 = DIRECTION('',(1.,0.,-0.));+#23 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#27)) GLOBAL_UNIT_ASSIGNED_CONTEXT(+(#24,#25,#26)) REPRESENTATION_CONTEXT('Context #1',+ '3D Context with UNIT and UNCERTAINTY') );+#24 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) );+#25 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) );+#26 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );+#27 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(5.E-07),#24,+ 'distance_accuracy_value','confusion accuracy');+#28 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#7));+#29 = SHAPE_DEFINITION_REPRESENTATION(#30,#36);+#30 = PRODUCT_DEFINITION_SHAPE('','',#31);+#31 = PRODUCT_DEFINITION('design','',#32,#35);+#32 = PRODUCT_DEFINITION_FORMATION('','',#33);+#33 = PRODUCT('body','body','',(#34));+#34 = PRODUCT_CONTEXT('',#2,'mechanical');+#35 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');+#36 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#37),#21008);+#37 = MANIFOLD_SOLID_BREP('',#38);+#38 = CLOSED_SHELL('',(#39,#156,#235,#538,#617,#696,#775,#1073,#1156,+ #2396,#2469,#6412,#6488,#7111,#7138,#7165,#7192,#7219,#7246,#7273,+ #7300,#7327,#7354,#7381,#7408,#7435,#7462,#7489,#7516,#7543,#7570,+ #7597,#7624,#7651,#7678,#7705,#7732,#7759,#7786,#7813,#7820,#7896,+ #8105,#8132,#8159,#8186,#8213,#8240,#8267,#8294,#8321,#8328,#8404,+ #8544,#8571,#8598,#8625,#8652,#8679,#8686,#8762,#9247,#9274,#9301,+ #9328,#9355,#9382,#9409,#9436,#9463,#9490,#9517,#9544,#9571,#9598,+ #9625,#9652,#9679,#9706,#9733,#9760,#9787,#9794,#9870,#10102,#10129,+ #10156,#10183,#10210,#10237,#10264,#10291,#10318,#10345,#10352,+ #10428,#10568,#10595,#10622,#10649,#10676,#10703,#10710,#10786,+ #11398,#11489,#11721,#11748,#11775,#11802,#11829,#11856,#11883,+ #11890,#11917,#11944,#11971,#11998,#12025,#12052,#12079,#12106,+ #12133,#12160,#12187,#12214,#12241,#12268,#12295,#12302,#12378,+ #13022,#13104,#13256,#13283,#13310,#13337,#13364,#13391,#13398,+ #13480,#13632,#13659,#13686,#13713,#13740,#13767,#13774,#13801,+ #13828,#13855,#13882,#13909,#13936,#13963,#13990,#14017,#14024,+ #14050,#14076,#14102,#14128,#14154,#14180,#14187,#14492,#14563,+ #14617,#14666,#14715,#14764,#14814,#14863,#14917,#14945,#15000,+ #15305,#15376,#15430,#15479,#15528,#15577,#15627,#15676,#15730,+ #15758,#15813,#16118,#16189,#16243,#16292,#16341,#16390,#16440,+ #16489,#16543,#16571,#16626,#16931,#17002,#17056,#17105,#17154,+ #17203,#17253,#17302,#17356,#17384,#17439,#17744,#17815,#17869,+ #17918,#17967,#18016,#18066,#18115,#18169,#18197,#18252,#18557,+ #18628,#18682,#18731,#18780,#18829,#18879,#18928,#18982,#19010,+ #19065,#19370,#19441,#19495,#19544,#19593,#19642,#19692,#19741,+ #19795,#19823,#19878,#20183,#20254,#20308,#20357,#20406,#20455,+ #20505,#20554,#20608,#20636,#20671,#20715,#20722,#20729,#20736,+ #20743,#20750,#20757,#20764,#20788,#20812,#20836,#20860,#20867,+ #20874,#20881,#20888,#20895,#20902,#20909,#20916,#20940,#20964,+ #20971,#20997));+#39 = ADVANCED_FACE('',(#40),#54,.F.);+#40 = FACE_BOUND('',#41,.F.);+#41 = EDGE_LOOP('',(#42,#76,#103,#131));+#42 = ORIENTED_EDGE('',*,*,#43,.T.);+#43 = EDGE_CURVE('',#44,#46,#48,.T.);+#44 = VERTEX_POINT('',#45);+#45 = CARTESIAN_POINT('',(-1.717585640382,2.335171280765,0.1));+#46 = VERTEX_POINT('',#47);+#47 = CARTESIAN_POINT('',(1.717585640382,2.335171280765,0.1));+#48 = SURFACE_CURVE('',#49,(#53,#64),.PCURVE_S1.);+#49 = LINE('',#50,#51);+#50 = CARTESIAN_POINT('',(-1.717585640382,2.335171280765,0.1));+#51 = VECTOR('',#52,1.);+#52 = DIRECTION('',(1.,1.110223024625E-16,0.));+#53 = PCURVE('',#54,#59);+#54 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#55,#56)+ ,(#57,#58)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,3.55),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#55 = CARTESIAN_POINT('',(-1.717585640382,2.335171280765,0.1));+#56 = CARTESIAN_POINT('',(-1.775,2.45,0.825));+#57 = CARTESIAN_POINT('',(1.717585640382,2.335171280765,0.1));+#58 = CARTESIAN_POINT('',(1.775,2.45,0.825));+#59 = DEFINITIONAL_REPRESENTATION('',(#60),#63);+#60 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#61,#62),.UNSPECIFIED.,.F.,.F.,(2,+ 2),(0.,3.435171280764),.PIECEWISE_BEZIER_KNOTS.);+#61 = CARTESIAN_POINT('',(-1.0532603443E-16,-8.741167926555E-17));+#62 = CARTESIAN_POINT('',(3.55,2.72692595899E-17));+#63 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#64 = PCURVE('',#65,#70);+#65 = PLANE('',#66);+#66 = AXIS2_PLACEMENT_3D('',#67,#68,#69);+#67 = CARTESIAN_POINT('',(-1.717585640382,2.335171280765,0.1));+#68 = DIRECTION('',(0.,0.,1.));+#69 = DIRECTION('',(0.592513131498,-0.805560791625,0.));+#70 = DEFINITIONAL_REPRESENTATION('',(#71),#75);+#71 = LINE('',#72,#73);+#72 = CARTESIAN_POINT('',(0.,0.));+#73 = VECTOR('',#74,1.);+#74 = DIRECTION('',(0.592513131498,0.805560791625));+#75 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#76 = ORIENTED_EDGE('',*,*,#77,.T.);+#77 = EDGE_CURVE('',#46,#78,#80,.T.);+#78 = VERTEX_POINT('',#79);+#79 = CARTESIAN_POINT('',(1.775,2.45,0.825));+#80 = SURFACE_CURVE('',#81,(#84,#91),.PCURVE_S1.);+#81 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#82,#83),.UNSPECIFIED.,.F.,.F.,(2,+ 2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#82 = CARTESIAN_POINT('',(1.717585640382,2.335171280765,0.1));+#83 = CARTESIAN_POINT('',(1.775,2.45,0.825));+#84 = PCURVE('',#54,#85);+#85 = DEFINITIONAL_REPRESENTATION('',(#86),#90);+#86 = LINE('',#87,#88);+#87 = CARTESIAN_POINT('',(3.55,-1.047195745689E-16));+#88 = VECTOR('',#89,1.);+#89 = DIRECTION('',(0.,1.));+#90 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#91 = PCURVE('',#92,#97);+#92 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#93,#94)+ ,(#95,#96+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.247487373415),(0.,1.)+ ,.PIECEWISE_BEZIER_KNOTS.);+#93 = CARTESIAN_POINT('',(1.717585640382,2.335171280765,0.1));+#94 = CARTESIAN_POINT('',(1.775,2.45,0.825));+#95 = CARTESIAN_POINT('',(1.835171280765,2.217585640382,0.1));+#96 = CARTESIAN_POINT('',(1.95,2.275,0.825));+#97 = DEFINITIONAL_REPRESENTATION('',(#98),#102);+#98 = LINE('',#99,#100);+#99 = CARTESIAN_POINT('',(-9.626040581803E-17,4.809026301013E-18));+#100 = VECTOR('',#101,1.);+#101 = DIRECTION('',(1.762446947573E-16,1.));+#102 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#103 = ORIENTED_EDGE('',*,*,#104,.F.);+#104 = EDGE_CURVE('',#105,#78,#107,.T.);+#105 = VERTEX_POINT('',#106);+#106 = CARTESIAN_POINT('',(-1.775,2.45,0.825));+#107 = SURFACE_CURVE('',#108,(#112,#119),.PCURVE_S1.);+#108 = LINE('',#109,#110);+#109 = CARTESIAN_POINT('',(-1.775,2.45,0.825));+#110 = VECTOR('',#111,1.);+#111 = DIRECTION('',(1.,1.110223024625E-16,0.));+#112 = PCURVE('',#54,#113);+#113 = DEFINITIONAL_REPRESENTATION('',(#114),#118);+#114 = LINE('',#115,#116);+#115 = CARTESIAN_POINT('',(2.189308472908E-16,1.));+#116 = VECTOR('',#117,1.);+#117 = DIRECTION('',(1.,3.127388801761E-17));+#118 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#119 = PCURVE('',#120,#125);+#120 = PLANE('',#121);+#121 = AXIS2_PLACEMENT_3D('',#122,#123,#124);+#122 = CARTESIAN_POINT('',(-1.775,2.45,1.025));+#123 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#124 = DIRECTION('',(1.,1.110223024625E-16,0.));+#125 = DEFINITIONAL_REPRESENTATION('',(#126),#130);+#126 = LINE('',#127,#128);+#127 = CARTESIAN_POINT('',(0.,-0.2));+#128 = VECTOR('',#129,1.);+#129 = DIRECTION('',(1.,0.));+#130 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#131 = ORIENTED_EDGE('',*,*,#132,.F.);+#132 = EDGE_CURVE('',#44,#105,#133,.T.);+#133 = SURFACE_CURVE('',#134,(#137,#144),.PCURVE_S1.);+#134 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#135,#136),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#135 = CARTESIAN_POINT('',(-1.717585640382,2.335171280765,0.1));+#136 = CARTESIAN_POINT('',(-1.775,2.45,0.825));+#137 = PCURVE('',#54,#138);+#138 = DEFINITIONAL_REPRESENTATION('',(#139),#143);+#139 = LINE('',#140,#141);+#140 = CARTESIAN_POINT('',(-1.0532603443E-16,-8.741167926555E-17));+#141 = VECTOR('',#142,1.);+#142 = DIRECTION('',(1.022122767958E-16,1.));+#143 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#144 = PCURVE('',#145,#150);+#145 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#146,#147)+ ,(#148,#149+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.247487373415),(0.,1.)+ ,.PIECEWISE_BEZIER_KNOTS.);+#146 = CARTESIAN_POINT('',(-1.835171280765,2.217585640382,0.1));+#147 = CARTESIAN_POINT('',(-1.95,2.275,0.825));+#148 = CARTESIAN_POINT('',(-1.717585640382,2.335171280765,0.1));+#149 = CARTESIAN_POINT('',(-1.775,2.45,0.825));+#150 = DEFINITIONAL_REPRESENTATION('',(#151),#155);+#151 = LINE('',#152,#153);+#152 = CARTESIAN_POINT('',(0.247487373415,3.834137462134E-17));+#153 = VECTOR('',#154,1.);+#154 = DIRECTION('',(-3.608224830032E-16,1.));+#155 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#156 = ADVANCED_FACE('',(#157),#145,.F.);+#157 = FACE_BOUND('',#158,.F.);+#158 = EDGE_LOOP('',(#159,#181,#182,#210));+#159 = ORIENTED_EDGE('',*,*,#160,.T.);+#160 = EDGE_CURVE('',#161,#44,#163,.T.);+#161 = VERTEX_POINT('',#162);+#162 = CARTESIAN_POINT('',(-1.835171280765,2.217585640382,0.1));+#163 = SURFACE_CURVE('',#164,(#168,#174),.PCURVE_S1.);+#164 = LINE('',#165,#166);+#165 = CARTESIAN_POINT('',(-1.835171280765,2.217585640382,0.1));+#166 = VECTOR('',#167,1.);+#167 = DIRECTION('',(0.707106781187,0.707106781187,0.));+#168 = PCURVE('',#145,#169);+#169 = DEFINITIONAL_REPRESENTATION('',(#170),#173);+#170 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#171,#172),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,0.16629120737),.PIECEWISE_BEZIER_KNOTS.);+#171 = CARTESIAN_POINT('',(3.707552905462E-16,1.10118465575E-18));+#172 = CARTESIAN_POINT('',(0.247487373415,4.809026249314E-18));+#173 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#174 = PCURVE('',#65,#175);+#175 = DEFINITIONAL_REPRESENTATION('',(#176),#180);+#176 = LINE('',#177,#178);+#177 = CARTESIAN_POINT('',(2.505134554812E-02,-0.164393417553));+#178 = VECTOR('',#179,1.);+#179 = DIRECTION('',(-0.150647445192,0.98858755164));+#180 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#181 = ORIENTED_EDGE('',*,*,#132,.T.);+#182 = ORIENTED_EDGE('',*,*,#183,.F.);+#183 = EDGE_CURVE('',#184,#105,#186,.T.);+#184 = VERTEX_POINT('',#185);+#185 = CARTESIAN_POINT('',(-1.95,2.275,0.825));+#186 = SURFACE_CURVE('',#187,(#191,#198),.PCURVE_S1.);+#187 = LINE('',#188,#189);+#188 = CARTESIAN_POINT('',(-1.95,2.275,0.825));+#189 = VECTOR('',#190,1.);+#190 = DIRECTION('',(0.707106781187,0.707106781187,0.));+#191 = PCURVE('',#145,#192);+#192 = DEFINITIONAL_REPRESENTATION('',(#193),#197);+#193 = LINE('',#194,#195);+#194 = CARTESIAN_POINT('',(7.999472487695E-17,1.));+#195 = VECTOR('',#196,1.);+#196 = DIRECTION('',(1.,0.));+#197 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#198 = PCURVE('',#199,#204);+#199 = PLANE('',#200);+#200 = AXIS2_PLACEMENT_3D('',#201,#202,#203);+#201 = CARTESIAN_POINT('',(-1.95,2.275,1.025));+#202 = DIRECTION('',(0.707106781187,-0.707106781187,0.));+#203 = DIRECTION('',(0.707106781187,0.707106781187,0.));+#204 = DEFINITIONAL_REPRESENTATION('',(#205),#209);+#205 = LINE('',#206,#207);+#206 = CARTESIAN_POINT('',(0.,-0.2));+#207 = VECTOR('',#208,1.);+#208 = DIRECTION('',(1.,0.));+#209 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#210 = ORIENTED_EDGE('',*,*,#211,.F.);+#211 = EDGE_CURVE('',#161,#184,#212,.T.);+#212 = SURFACE_CURVE('',#213,(#216,#223),.PCURVE_S1.);+#213 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#214,#215),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#214 = CARTESIAN_POINT('',(-1.835171280765,2.217585640382,0.1));+#215 = CARTESIAN_POINT('',(-1.95,2.275,0.825));+#216 = PCURVE('',#145,#217);+#217 = DEFINITIONAL_REPRESENTATION('',(#218),#222);+#218 = LINE('',#219,#220);+#219 = CARTESIAN_POINT('',(3.707552905462E-16,1.10118465575E-18));+#220 = VECTOR('',#221,1.);+#221 = DIRECTION('',(-4.463333469861E-16,1.));+#222 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#223 = PCURVE('',#224,#229);+#224 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#225,#226)+ ,(#227,#228+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,4.55),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#225 = CARTESIAN_POINT('',(-1.835171280765,-2.217585640382,0.1));+#226 = CARTESIAN_POINT('',(-1.95,-2.275,0.825));+#227 = CARTESIAN_POINT('',(-1.835171280765,2.217585640382,0.1));+#228 = CARTESIAN_POINT('',(-1.95,2.275,0.825));+#229 = DEFINITIONAL_REPRESENTATION('',(#230),#234);+#230 = LINE('',#231,#232);+#231 = CARTESIAN_POINT('',(4.55,-5.031297844791E-18));+#232 = VECTOR('',#233,1.);+#233 = DIRECTION('',(0.,1.));+#234 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#235 = ADVANCED_FACE('',(#236),#224,.F.);+#236 = FACE_BOUND('',#237,.F.);+#237 = EDGE_LOOP('',(#238,#260,#261,#289,#317,#345,#373,#401,#429,#457,+ #485,#513));+#238 = ORIENTED_EDGE('',*,*,#239,.T.);+#239 = EDGE_CURVE('',#240,#161,#242,.T.);+#240 = VERTEX_POINT('',#241);+#241 = CARTESIAN_POINT('',(-1.835171280765,-2.217585640382,0.1));+#242 = SURFACE_CURVE('',#243,(#247,#253),.PCURVE_S1.);+#243 = LINE('',#244,#245);+#244 = CARTESIAN_POINT('',(-1.835171280765,-2.217585640382,0.1));+#245 = VECTOR('',#246,1.);+#246 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#247 = PCURVE('',#224,#248);+#248 = DEFINITIONAL_REPRESENTATION('',(#249),#252);+#249 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#250,#251),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,4.435171280764),.PIECEWISE_BEZIER_KNOTS.);+#250 = CARTESIAN_POINT('',(-5.279026112648E-16,-7.468886720343E-18));+#251 = CARTESIAN_POINT('',(4.55,1.070087642278E-16));+#252 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#253 = PCURVE('',#65,#254);+#254 = DEFINITIONAL_REPRESENTATION('',(#255),#259);+#255 = LINE('',#256,#257);+#256 = CARTESIAN_POINT('',(3.597851433471,-2.792290641847));+#257 = VECTOR('',#258,1.);+#258 = DIRECTION('',(-0.805560791625,0.592513131498));+#259 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#260 = ORIENTED_EDGE('',*,*,#211,.T.);+#261 = ORIENTED_EDGE('',*,*,#262,.F.);+#262 = EDGE_CURVE('',#263,#184,#265,.T.);+#263 = VERTEX_POINT('',#264);+#264 = CARTESIAN_POINT('',(-1.95,2.11,0.825));+#265 = SURFACE_CURVE('',#266,(#270,#277),.PCURVE_S1.);+#266 = LINE('',#267,#268);+#267 = CARTESIAN_POINT('',(-1.95,-2.275,0.825));+#268 = VECTOR('',#269,1.);+#269 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#270 = PCURVE('',#224,#271);+#271 = DEFINITIONAL_REPRESENTATION('',(#272),#276);+#272 = LINE('',#273,#274);+#273 = CARTESIAN_POINT('',(8.881784197001E-16,1.));+#274 = VECTOR('',#275,1.);+#275 = DIRECTION('',(1.,1.345724878334E-15));+#276 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#277 = PCURVE('',#278,#283);+#278 = PLANE('',#279);+#279 = AXIS2_PLACEMENT_3D('',#280,#281,#282);+#280 = CARTESIAN_POINT('',(-1.95,-2.275,1.025));+#281 = DIRECTION('',(1.,1.110223024625E-16,0.));+#282 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#283 = DEFINITIONAL_REPRESENTATION('',(#284),#288);+#284 = LINE('',#285,#286);+#285 = CARTESIAN_POINT('',(0.,-0.2));+#286 = VECTOR('',#287,1.);+#287 = DIRECTION('',(1.,0.));+#288 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#289 = ORIENTED_EDGE('',*,*,#290,.F.);+#290 = EDGE_CURVE('',#291,#263,#293,.T.);+#291 = VERTEX_POINT('',#292);+#292 = CARTESIAN_POINT('',(-1.95,1.7,0.825));+#293 = SURFACE_CURVE('',#294,(#298,#305),.PCURVE_S1.);+#294 = LINE('',#295,#296);+#295 = CARTESIAN_POINT('',(-1.95,-2.275,0.825));+#296 = VECTOR('',#297,1.);+#297 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#298 = PCURVE('',#224,#299);+#299 = DEFINITIONAL_REPRESENTATION('',(#300),#304);+#300 = LINE('',#301,#302);+#301 = CARTESIAN_POINT('',(4.440892098501E-16,1.));+#302 = VECTOR('',#303,1.);+#303 = DIRECTION('',(1.,5.415722071342E-16));+#304 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#305 = PCURVE('',#306,#311);+#306 = PLANE('',#307);+#307 = AXIS2_PLACEMENT_3D('',#308,#309,#310);+#308 = CARTESIAN_POINT('',(-1.8,1.7,0.825));+#309 = DIRECTION('',(0.,0.,1.));+#310 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#311 = DEFINITIONAL_REPRESENTATION('',(#312),#316);+#312 = LINE('',#313,#314);+#313 = CARTESIAN_POINT('',(0.15,3.975));+#314 = VECTOR('',#315,1.);+#315 = DIRECTION('',(1.224646799147E-16,-1.));+#316 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#317 = ORIENTED_EDGE('',*,*,#318,.F.);+#318 = EDGE_CURVE('',#319,#291,#321,.T.);+#319 = VERTEX_POINT('',#320);+#320 = CARTESIAN_POINT('',(-1.95,0.84,0.825));+#321 = SURFACE_CURVE('',#322,(#326,#333),.PCURVE_S1.);+#322 = LINE('',#323,#324);+#323 = CARTESIAN_POINT('',(-1.95,-2.275,0.825));+#324 = VECTOR('',#325,1.);+#325 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#326 = PCURVE('',#224,#327);+#327 = DEFINITIONAL_REPRESENTATION('',(#328),#332);+#328 = LINE('',#329,#330);+#329 = CARTESIAN_POINT('',(4.440892098501E-16,1.));+#330 = VECTOR('',#331,1.);+#331 = DIRECTION('',(1.,2.581914010756E-16));+#332 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#333 = PCURVE('',#334,#339);+#334 = PLANE('',#335);+#335 = AXIS2_PLACEMENT_3D('',#336,#337,#338);+#336 = CARTESIAN_POINT('',(-1.95,-2.275,1.025));+#337 = DIRECTION('',(1.,1.110223024625E-16,0.));+#338 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#339 = DEFINITIONAL_REPRESENTATION('',(#340),#344);+#340 = LINE('',#341,#342);+#341 = CARTESIAN_POINT('',(0.,-0.2));+#342 = VECTOR('',#343,1.);+#343 = DIRECTION('',(1.,0.));+#344 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#345 = ORIENTED_EDGE('',*,*,#346,.F.);+#346 = EDGE_CURVE('',#347,#319,#349,.T.);+#347 = VERTEX_POINT('',#348);+#348 = CARTESIAN_POINT('',(-1.95,0.43,0.825));+#349 = SURFACE_CURVE('',#350,(#354,#361),.PCURVE_S1.);+#350 = LINE('',#351,#352);+#351 = CARTESIAN_POINT('',(-1.95,-2.275,0.825));+#352 = VECTOR('',#353,1.);+#353 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#354 = PCURVE('',#224,#355);+#355 = DEFINITIONAL_REPRESENTATION('',(#356),#360);+#356 = LINE('',#357,#358);+#357 = CARTESIAN_POINT('',(4.440892098501E-16,1.));+#358 = VECTOR('',#359,1.);+#359 = DIRECTION('',(1.,5.415722071342E-16));+#360 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#361 = PCURVE('',#362,#367);+#362 = PLANE('',#363);+#363 = AXIS2_PLACEMENT_3D('',#364,#365,#366);+#364 = CARTESIAN_POINT('',(-1.8,0.43,0.825));+#365 = DIRECTION('',(0.,0.,1.));+#366 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#367 = DEFINITIONAL_REPRESENTATION('',(#368),#372);+#368 = LINE('',#369,#370);+#369 = CARTESIAN_POINT('',(0.15,2.705));+#370 = VECTOR('',#371,1.);+#371 = DIRECTION('',(1.224646799147E-16,-1.));+#372 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#373 = ORIENTED_EDGE('',*,*,#374,.F.);+#374 = EDGE_CURVE('',#375,#347,#377,.T.);+#375 = VERTEX_POINT('',#376);+#376 = CARTESIAN_POINT('',(-1.95,-0.43,0.825));+#377 = SURFACE_CURVE('',#378,(#382,#389),.PCURVE_S1.);+#378 = LINE('',#379,#380);+#379 = CARTESIAN_POINT('',(-1.95,-2.275,0.825));+#380 = VECTOR('',#381,1.);+#381 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#382 = PCURVE('',#224,#383);+#383 = DEFINITIONAL_REPRESENTATION('',(#384),#388);+#384 = LINE('',#385,#386);+#385 = CARTESIAN_POINT('',(2.22044604925E-16,1.));+#386 = VECTOR('',#387,1.);+#387 = DIRECTION('',(1.,0.));+#388 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#389 = PCURVE('',#390,#395);+#390 = PLANE('',#391);+#391 = AXIS2_PLACEMENT_3D('',#392,#393,#394);+#392 = CARTESIAN_POINT('',(-1.95,-2.275,1.025));+#393 = DIRECTION('',(1.,1.110223024625E-16,0.));+#394 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#395 = DEFINITIONAL_REPRESENTATION('',(#396),#400);+#396 = LINE('',#397,#398);+#397 = CARTESIAN_POINT('',(0.,-0.2));+#398 = VECTOR('',#399,1.);+#399 = DIRECTION('',(1.,0.));+#400 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#401 = ORIENTED_EDGE('',*,*,#402,.F.);+#402 = EDGE_CURVE('',#403,#375,#405,.T.);+#403 = VERTEX_POINT('',#404);+#404 = CARTESIAN_POINT('',(-1.95,-0.84,0.825));+#405 = SURFACE_CURVE('',#406,(#410,#417),.PCURVE_S1.);+#406 = LINE('',#407,#408);+#407 = CARTESIAN_POINT('',(-1.95,-2.275,0.825));+#408 = VECTOR('',#409,1.);+#409 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#410 = PCURVE('',#224,#411);+#411 = DEFINITIONAL_REPRESENTATION('',(#412),#416);+#412 = LINE('',#413,#414);+#413 = CARTESIAN_POINT('',(2.22044604925E-16,1.));+#414 = VECTOR('',#415,1.);+#415 = DIRECTION('',(1.,0.));+#416 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#417 = PCURVE('',#418,#423);+#418 = PLANE('',#419);+#419 = AXIS2_PLACEMENT_3D('',#420,#421,#422);+#420 = CARTESIAN_POINT('',(-1.8,-0.84,0.825));+#421 = DIRECTION('',(0.,0.,1.));+#422 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#423 = DEFINITIONAL_REPRESENTATION('',(#424),#428);+#424 = LINE('',#425,#426);+#425 = CARTESIAN_POINT('',(0.15,1.435));+#426 = VECTOR('',#427,1.);+#427 = DIRECTION('',(1.224646799147E-16,-1.));+#428 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#429 = ORIENTED_EDGE('',*,*,#430,.F.);+#430 = EDGE_CURVE('',#431,#403,#433,.T.);+#431 = VERTEX_POINT('',#432);+#432 = CARTESIAN_POINT('',(-1.95,-1.7,0.825));+#433 = SURFACE_CURVE('',#434,(#438,#445),.PCURVE_S1.);+#434 = LINE('',#435,#436);+#435 = CARTESIAN_POINT('',(-1.95,-2.275,0.825));+#436 = VECTOR('',#437,1.);+#437 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#438 = PCURVE('',#224,#439);+#439 = DEFINITIONAL_REPRESENTATION('',(#440),#444);+#440 = LINE('',#441,#442);+#441 = CARTESIAN_POINT('',(2.22044604925E-16,1.));+#442 = VECTOR('',#443,1.);+#443 = DIRECTION('',(1.,1.290957005378E-16));+#444 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#445 = PCURVE('',#446,#451);+#446 = PLANE('',#447);+#447 = AXIS2_PLACEMENT_3D('',#448,#449,#450);+#448 = CARTESIAN_POINT('',(-1.95,-2.275,1.025));+#449 = DIRECTION('',(1.,1.110223024625E-16,0.));+#450 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#451 = DEFINITIONAL_REPRESENTATION('',(#452),#456);+#452 = LINE('',#453,#454);+#453 = CARTESIAN_POINT('',(0.,-0.2));+#454 = VECTOR('',#455,1.);+#455 = DIRECTION('',(1.,0.));+#456 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#457 = ORIENTED_EDGE('',*,*,#458,.F.);+#458 = EDGE_CURVE('',#459,#431,#461,.T.);+#459 = VERTEX_POINT('',#460);+#460 = CARTESIAN_POINT('',(-1.95,-2.11,0.825));+#461 = SURFACE_CURVE('',#462,(#466,#473),.PCURVE_S1.);+#462 = LINE('',#463,#464);+#463 = CARTESIAN_POINT('',(-1.95,-2.275,0.825));+#464 = VECTOR('',#465,1.);+#465 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#466 = PCURVE('',#224,#467);+#467 = DEFINITIONAL_REPRESENTATION('',(#468),#472);+#468 = LINE('',#469,#470);+#469 = CARTESIAN_POINT('',(1.110223024625E-16,1.));+#470 = VECTOR('',#471,1.);+#471 = DIRECTION('',(1.,0.));+#472 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#473 = PCURVE('',#474,#479);+#474 = PLANE('',#475);+#475 = AXIS2_PLACEMENT_3D('',#476,#477,#478);+#476 = CARTESIAN_POINT('',(-1.8,-2.11,0.825));+#477 = DIRECTION('',(0.,0.,1.));+#478 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#479 = DEFINITIONAL_REPRESENTATION('',(#480),#484);+#480 = LINE('',#481,#482);+#481 = CARTESIAN_POINT('',(0.15,0.165));+#482 = VECTOR('',#483,1.);+#483 = DIRECTION('',(1.224646799147E-16,-1.));+#484 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#485 = ORIENTED_EDGE('',*,*,#486,.F.);+#486 = EDGE_CURVE('',#487,#459,#489,.T.);+#487 = VERTEX_POINT('',#488);+#488 = CARTESIAN_POINT('',(-1.95,-2.275,0.825));+#489 = SURFACE_CURVE('',#490,(#494,#501),.PCURVE_S1.);+#490 = LINE('',#491,#492);+#491 = CARTESIAN_POINT('',(-1.95,-2.275,0.825));+#492 = VECTOR('',#493,1.);+#493 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#494 = PCURVE('',#224,#495);+#495 = DEFINITIONAL_REPRESENTATION('',(#496),#500);+#496 = LINE('',#497,#498);+#497 = CARTESIAN_POINT('',(1.978430405897E-17,1.));+#498 = VECTOR('',#499,1.);+#499 = DIRECTION('',(1.,-6.728624391668E-16));+#500 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#501 = PCURVE('',#502,#507);+#502 = PLANE('',#503);+#503 = AXIS2_PLACEMENT_3D('',#504,#505,#506);+#504 = CARTESIAN_POINT('',(-1.95,-2.275,1.025));+#505 = DIRECTION('',(1.,1.110223024625E-16,0.));+#506 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#507 = DEFINITIONAL_REPRESENTATION('',(#508),#512);+#508 = LINE('',#509,#510);+#509 = CARTESIAN_POINT('',(0.,-0.2));+#510 = VECTOR('',#511,1.);+#511 = DIRECTION('',(1.,0.));+#512 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#513 = ORIENTED_EDGE('',*,*,#514,.F.);+#514 = EDGE_CURVE('',#240,#487,#515,.T.);+#515 = SURFACE_CURVE('',#516,(#519,#526),.PCURVE_S1.);+#516 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#517,#518),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#517 = CARTESIAN_POINT('',(-1.835171280765,-2.217585640382,0.1));+#518 = CARTESIAN_POINT('',(-1.95,-2.275,0.825));+#519 = PCURVE('',#224,#520);+#520 = DEFINITIONAL_REPRESENTATION('',(#521),#525);+#521 = LINE('',#522,#523);+#522 = CARTESIAN_POINT('',(-5.279026112648E-16,-7.468886720343E-18));+#523 = VECTOR('',#524,1.);+#524 = DIRECTION('',(5.504038244495E-16,1.));+#525 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#526 = PCURVE('',#527,#532);+#527 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#528,#529)+ ,(#530,#531+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.247487373415),(0.,1.)+ ,.PIECEWISE_BEZIER_KNOTS.);+#528 = CARTESIAN_POINT('',(-1.717585640382,-2.335171280765,0.1));+#529 = CARTESIAN_POINT('',(-1.775,-2.45,0.825));+#530 = CARTESIAN_POINT('',(-1.835171280765,-2.217585640382,0.1));+#531 = CARTESIAN_POINT('',(-1.95,-2.275,0.825));+#532 = DEFINITIONAL_REPRESENTATION('',(#533),#537);+#533 = LINE('',#534,#535);+#534 = CARTESIAN_POINT('',(0.247487373415,7.001610398739E-17));+#535 = VECTOR('',#536,1.);+#536 = DIRECTION('',(5.551115123126E-16,1.));+#537 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#538 = ADVANCED_FACE('',(#539),#527,.F.);+#539 = FACE_BOUND('',#540,.F.);+#540 = EDGE_LOOP('',(#541,#563,#564,#592));+#541 = ORIENTED_EDGE('',*,*,#542,.T.);+#542 = EDGE_CURVE('',#543,#240,#545,.T.);+#543 = VERTEX_POINT('',#544);+#544 = CARTESIAN_POINT('',(-1.717585640382,-2.335171280765,0.1));+#545 = SURFACE_CURVE('',#546,(#550,#556),.PCURVE_S1.);+#546 = LINE('',#547,#548);+#547 = CARTESIAN_POINT('',(-1.717585640382,-2.335171280765,0.1));+#548 = VECTOR('',#549,1.);+#549 = DIRECTION('',(-0.707106781187,0.707106781187,0.));+#550 = PCURVE('',#527,#551);+#551 = DEFINITIONAL_REPRESENTATION('',(#552),#555);+#552 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#553,#554),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,0.16629120737),.PIECEWISE_BEZIER_KNOTS.);+#553 = CARTESIAN_POINT('',(-9.626040581803E-17,4.809026301013E-18));+#554 = CARTESIAN_POINT('',(0.247487373415,1.101184707449E-18));+#555 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#556 = PCURVE('',#65,#557);+#557 = DEFINITIONAL_REPRESENTATION('',(#558),#562);+#558 = LINE('',#559,#560);+#559 = CARTESIAN_POINT('',(3.762244851024,-2.767239296299));+#560 = VECTOR('',#561,1.);+#561 = DIRECTION('',(-0.98858755164,-0.150647445192));+#562 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#563 = ORIENTED_EDGE('',*,*,#514,.T.);+#564 = ORIENTED_EDGE('',*,*,#565,.F.);+#565 = EDGE_CURVE('',#566,#487,#568,.T.);+#566 = VERTEX_POINT('',#567);+#567 = CARTESIAN_POINT('',(-1.775,-2.45,0.825));+#568 = SURFACE_CURVE('',#569,(#573,#580),.PCURVE_S1.);+#569 = LINE('',#570,#571);+#570 = CARTESIAN_POINT('',(-1.775,-2.45,0.825));+#571 = VECTOR('',#572,1.);+#572 = DIRECTION('',(-0.707106781187,0.707106781187,0.));+#573 = PCURVE('',#527,#574);+#574 = DEFINITIONAL_REPRESENTATION('',(#575),#579);+#575 = LINE('',#576,#577);+#576 = CARTESIAN_POINT('',(-7.846142148017E-17,1.));+#577 = VECTOR('',#578,1.);+#578 = DIRECTION('',(1.,0.));+#579 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#580 = PCURVE('',#581,#586);+#581 = PLANE('',#582);+#582 = AXIS2_PLACEMENT_3D('',#583,#584,#585);+#583 = CARTESIAN_POINT('',(-1.775,-2.45,1.025));+#584 = DIRECTION('',(0.707106781187,0.707106781187,0.));+#585 = DIRECTION('',(-0.707106781187,0.707106781187,0.));+#586 = DEFINITIONAL_REPRESENTATION('',(#587),#591);+#587 = LINE('',#588,#589);+#588 = CARTESIAN_POINT('',(0.,-0.2));+#589 = VECTOR('',#590,1.);+#590 = DIRECTION('',(1.,0.));+#591 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#592 = ORIENTED_EDGE('',*,*,#593,.F.);+#593 = EDGE_CURVE('',#543,#566,#594,.T.);+#594 = SURFACE_CURVE('',#595,(#598,#605),.PCURVE_S1.);+#595 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#596,#597),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#596 = CARTESIAN_POINT('',(-1.717585640382,-2.335171280765,0.1));+#597 = CARTESIAN_POINT('',(-1.775,-2.45,0.825));+#598 = PCURVE('',#527,#599);+#599 = DEFINITIONAL_REPRESENTATION('',(#600),#604);+#600 = LINE('',#601,#602);+#601 = CARTESIAN_POINT('',(-9.626040581803E-17,4.809026301013E-18));+#602 = VECTOR('',#603,1.);+#603 = DIRECTION('',(1.762446947573E-16,1.));+#604 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#605 = PCURVE('',#606,#611);+#606 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#607,#608)+ ,(#609,#610+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,3.55),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#607 = CARTESIAN_POINT('',(1.717585640382,-2.335171280765,0.1));+#608 = CARTESIAN_POINT('',(1.775,-2.45,0.825));+#609 = CARTESIAN_POINT('',(-1.717585640382,-2.335171280765,0.1));+#610 = CARTESIAN_POINT('',(-1.775,-2.45,0.825));+#611 = DEFINITIONAL_REPRESENTATION('',(#612),#616);+#612 = LINE('',#613,#614);+#613 = CARTESIAN_POINT('',(3.55,-1.047195745689E-16));+#614 = VECTOR('',#615,1.);+#615 = DIRECTION('',(0.,1.));+#616 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#617 = ADVANCED_FACE('',(#618),#606,.F.);+#618 = FACE_BOUND('',#619,.F.);+#619 = EDGE_LOOP('',(#620,#642,#643,#671));+#620 = ORIENTED_EDGE('',*,*,#621,.T.);+#621 = EDGE_CURVE('',#622,#543,#624,.T.);+#622 = VERTEX_POINT('',#623);+#623 = CARTESIAN_POINT('',(1.717585640382,-2.335171280765,0.1));+#624 = SURFACE_CURVE('',#625,(#629,#635),.PCURVE_S1.);+#625 = LINE('',#626,#627);+#626 = CARTESIAN_POINT('',(1.717585640382,-2.335171280765,0.1));+#627 = VECTOR('',#628,1.);+#628 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#629 = PCURVE('',#606,#630);+#630 = DEFINITIONAL_REPRESENTATION('',(#631),#634);+#631 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#632,#633),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,3.435171280764),.PIECEWISE_BEZIER_KNOTS.);+#632 = CARTESIAN_POINT('',(-1.0532603443E-16,-8.741167926555E-17));+#633 = CARTESIAN_POINT('',(3.55,2.72692595899E-17));+#634 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#635 = PCURVE('',#65,#636);+#636 = DEFINITIONAL_REPRESENTATION('',(#637),#641);+#637 = LINE('',#638,#639);+#638 = CARTESIAN_POINT('',(5.79762894382,-8.180123245438E-13));+#639 = VECTOR('',#640,1.);+#640 = DIRECTION('',(-0.592513131498,-0.805560791625));+#641 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#642 = ORIENTED_EDGE('',*,*,#593,.T.);+#643 = ORIENTED_EDGE('',*,*,#644,.F.);+#644 = EDGE_CURVE('',#645,#566,#647,.T.);+#645 = VERTEX_POINT('',#646);+#646 = CARTESIAN_POINT('',(1.775,-2.45,0.825));+#647 = SURFACE_CURVE('',#648,(#652,#659),.PCURVE_S1.);+#648 = LINE('',#649,#650);+#649 = CARTESIAN_POINT('',(1.775,-2.45,0.825));+#650 = VECTOR('',#651,1.);+#651 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#652 = PCURVE('',#606,#653);+#653 = DEFINITIONAL_REPRESENTATION('',(#654),#658);+#654 = LINE('',#655,#656);+#655 = CARTESIAN_POINT('',(2.189308472908E-16,1.));+#656 = VECTOR('',#657,1.);+#657 = DIRECTION('',(1.,3.127388801761E-17));+#658 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#659 = PCURVE('',#660,#665);+#660 = PLANE('',#661);+#661 = AXIS2_PLACEMENT_3D('',#662,#663,#664);+#662 = CARTESIAN_POINT('',(1.775,-2.45,1.025));+#663 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#664 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#665 = DEFINITIONAL_REPRESENTATION('',(#666),#670);+#666 = LINE('',#667,#668);+#667 = CARTESIAN_POINT('',(-0.,-0.2));+#668 = VECTOR('',#669,1.);+#669 = DIRECTION('',(1.,0.));+#670 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#671 = ORIENTED_EDGE('',*,*,#672,.F.);+#672 = EDGE_CURVE('',#622,#645,#673,.T.);+#673 = SURFACE_CURVE('',#674,(#677,#684),.PCURVE_S1.);+#674 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#675,#676),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#675 = CARTESIAN_POINT('',(1.717585640382,-2.335171280765,0.1));+#676 = CARTESIAN_POINT('',(1.775,-2.45,0.825));+#677 = PCURVE('',#606,#678);+#678 = DEFINITIONAL_REPRESENTATION('',(#679),#683);+#679 = LINE('',#680,#681);+#680 = CARTESIAN_POINT('',(-1.0532603443E-16,-8.741167926555E-17));+#681 = VECTOR('',#682,1.);+#682 = DIRECTION('',(1.022122767958E-16,1.));+#683 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#684 = PCURVE('',#685,#690);+#685 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#686,#687)+ ,(#688,#689+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.247487373415),(0.,1.)+ ,.PIECEWISE_BEZIER_KNOTS.);+#686 = CARTESIAN_POINT('',(1.835171280765,-2.217585640382,0.1));+#687 = CARTESIAN_POINT('',(1.95,-2.275,0.825));+#688 = CARTESIAN_POINT('',(1.717585640382,-2.335171280765,0.1));+#689 = CARTESIAN_POINT('',(1.775,-2.45,0.825));+#690 = DEFINITIONAL_REPRESENTATION('',(#691),#695);+#691 = LINE('',#692,#693);+#692 = CARTESIAN_POINT('',(0.247487373415,3.834137462134E-17));+#693 = VECTOR('',#694,1.);+#694 = DIRECTION('',(-3.608224830032E-16,1.));+#695 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#696 = ADVANCED_FACE('',(#697),#685,.F.);+#697 = FACE_BOUND('',#698,.F.);+#698 = EDGE_LOOP('',(#699,#721,#722,#750));+#699 = ORIENTED_EDGE('',*,*,#700,.T.);+#700 = EDGE_CURVE('',#701,#622,#703,.T.);+#701 = VERTEX_POINT('',#702);+#702 = CARTESIAN_POINT('',(1.835171280765,-2.217585640382,0.1));+#703 = SURFACE_CURVE('',#704,(#708,#714),.PCURVE_S1.);+#704 = LINE('',#705,#706);+#705 = CARTESIAN_POINT('',(1.835171280765,-2.217585640382,0.1));+#706 = VECTOR('',#707,1.);+#707 = DIRECTION('',(-0.707106781187,-0.707106781187,0.));+#708 = PCURVE('',#685,#709);+#709 = DEFINITIONAL_REPRESENTATION('',(#710),#713);+#710 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#711,#712),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,0.16629120737),.PIECEWISE_BEZIER_KNOTS.);+#711 = CARTESIAN_POINT('',(3.707552905462E-16,1.10118465575E-18));+#712 = CARTESIAN_POINT('',(0.247487373415,4.809026249314E-18));+#713 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#714 = PCURVE('',#65,#715);+#715 = DEFINITIONAL_REPRESENTATION('',(#716),#720);+#716 = LINE('',#717,#718);+#717 = CARTESIAN_POINT('',(5.772577598272,0.164393417552));+#718 = VECTOR('',#719,1.);+#719 = DIRECTION('',(0.150647445192,-0.98858755164));+#720 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#721 = ORIENTED_EDGE('',*,*,#672,.T.);+#722 = ORIENTED_EDGE('',*,*,#723,.F.);+#723 = EDGE_CURVE('',#724,#645,#726,.T.);+#724 = VERTEX_POINT('',#725);+#725 = CARTESIAN_POINT('',(1.95,-2.275,0.825));+#726 = SURFACE_CURVE('',#727,(#731,#738),.PCURVE_S1.);+#727 = LINE('',#728,#729);+#728 = CARTESIAN_POINT('',(1.95,-2.275,0.825));+#729 = VECTOR('',#730,1.);+#730 = DIRECTION('',(-0.707106781187,-0.707106781187,0.));+#731 = PCURVE('',#685,#732);+#732 = DEFINITIONAL_REPRESENTATION('',(#733),#737);+#733 = LINE('',#734,#735);+#734 = CARTESIAN_POINT('',(7.999472487695E-17,1.));+#735 = VECTOR('',#736,1.);+#736 = DIRECTION('',(1.,0.));+#737 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#738 = PCURVE('',#739,#744);+#739 = PLANE('',#740);+#740 = AXIS2_PLACEMENT_3D('',#741,#742,#743);+#741 = CARTESIAN_POINT('',(1.95,-2.275,1.025));+#742 = DIRECTION('',(-0.707106781187,0.707106781187,0.));+#743 = DIRECTION('',(-0.707106781187,-0.707106781187,0.));+#744 = DEFINITIONAL_REPRESENTATION('',(#745),#749);+#745 = LINE('',#746,#747);+#746 = CARTESIAN_POINT('',(-0.,-0.2));+#747 = VECTOR('',#748,1.);+#748 = DIRECTION('',(1.,0.));+#749 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#750 = ORIENTED_EDGE('',*,*,#751,.F.);+#751 = EDGE_CURVE('',#701,#724,#752,.T.);+#752 = SURFACE_CURVE('',#753,(#756,#763),.PCURVE_S1.);+#753 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#754,#755),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#754 = CARTESIAN_POINT('',(1.835171280765,-2.217585640382,0.1));+#755 = CARTESIAN_POINT('',(1.95,-2.275,0.825));+#756 = PCURVE('',#685,#757);+#757 = DEFINITIONAL_REPRESENTATION('',(#758),#762);+#758 = LINE('',#759,#760);+#759 = CARTESIAN_POINT('',(3.707552905462E-16,1.10118465575E-18));+#760 = VECTOR('',#761,1.);+#761 = DIRECTION('',(-4.463333469861E-16,1.));+#762 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#763 = PCURVE('',#764,#769);+#764 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#765,#766)+ ,(#767,#768+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,4.55),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#765 = CARTESIAN_POINT('',(1.835171280765,2.217585640382,0.1));+#766 = CARTESIAN_POINT('',(1.95,2.275,0.825));+#767 = CARTESIAN_POINT('',(1.835171280765,-2.217585640382,0.1));+#768 = CARTESIAN_POINT('',(1.95,-2.275,0.825));+#769 = DEFINITIONAL_REPRESENTATION('',(#770),#774);+#770 = LINE('',#771,#772);+#771 = CARTESIAN_POINT('',(4.55,-5.031297844791E-18));+#772 = VECTOR('',#773,1.);+#773 = DIRECTION('',(0.,1.));+#774 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#775 = ADVANCED_FACE('',(#776),#764,.F.);+#776 = FACE_BOUND('',#777,.F.);+#777 = EDGE_LOOP('',(#778,#800,#801,#829,#857,#885,#913,#941,#969,#997,+ #1025,#1053));+#778 = ORIENTED_EDGE('',*,*,#779,.T.);+#779 = EDGE_CURVE('',#780,#701,#782,.T.);+#780 = VERTEX_POINT('',#781);+#781 = CARTESIAN_POINT('',(1.835171280765,2.217585640382,0.1));+#782 = SURFACE_CURVE('',#783,(#787,#793),.PCURVE_S1.);+#783 = LINE('',#784,#785);+#784 = CARTESIAN_POINT('',(1.835171280765,2.217585640382,0.1));+#785 = VECTOR('',#786,1.);+#786 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#787 = PCURVE('',#764,#788);+#788 = DEFINITIONAL_REPRESENTATION('',(#789),#792);+#789 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#790,#791),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,4.435171280764),.PIECEWISE_BEZIER_KNOTS.);+#790 = CARTESIAN_POINT('',(-5.279026112648E-16,-7.468886720343E-18));+#791 = CARTESIAN_POINT('',(4.55,1.070087642278E-16));+#792 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#793 = PCURVE('',#65,#794);+#794 = DEFINITIONAL_REPRESENTATION('',(#795),#799);+#795 = LINE('',#796,#797);+#796 = CARTESIAN_POINT('',(2.199777510349,2.792290641846));+#797 = VECTOR('',#798,1.);+#798 = DIRECTION('',(0.805560791625,-0.592513131498));+#799 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#800 = ORIENTED_EDGE('',*,*,#751,.T.);+#801 = ORIENTED_EDGE('',*,*,#802,.F.);+#802 = EDGE_CURVE('',#803,#724,#805,.T.);+#803 = VERTEX_POINT('',#804);+#804 = CARTESIAN_POINT('',(1.95,-2.11,0.825));+#805 = SURFACE_CURVE('',#806,(#810,#817),.PCURVE_S1.);+#806 = LINE('',#807,#808);+#807 = CARTESIAN_POINT('',(1.95,2.275,0.825));+#808 = VECTOR('',#809,1.);+#809 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#810 = PCURVE('',#764,#811);+#811 = DEFINITIONAL_REPRESENTATION('',(#812),#816);+#812 = LINE('',#813,#814);+#813 = CARTESIAN_POINT('',(8.881784197001E-16,1.));+#814 = VECTOR('',#815,1.);+#815 = DIRECTION('',(1.,1.345724878334E-15));+#816 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#817 = PCURVE('',#818,#823);+#818 = PLANE('',#819);+#819 = AXIS2_PLACEMENT_3D('',#820,#821,#822);+#820 = CARTESIAN_POINT('',(1.95,2.275,1.025));+#821 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#822 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#823 = DEFINITIONAL_REPRESENTATION('',(#824),#828);+#824 = LINE('',#825,#826);+#825 = CARTESIAN_POINT('',(0.,-0.2));+#826 = VECTOR('',#827,1.);+#827 = DIRECTION('',(1.,0.));+#828 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#829 = ORIENTED_EDGE('',*,*,#830,.F.);+#830 = EDGE_CURVE('',#831,#803,#833,.T.);+#831 = VERTEX_POINT('',#832);+#832 = CARTESIAN_POINT('',(1.95,-1.7,0.825));+#833 = SURFACE_CURVE('',#834,(#838,#845),.PCURVE_S1.);+#834 = LINE('',#835,#836);+#835 = CARTESIAN_POINT('',(1.95,2.275,0.825));+#836 = VECTOR('',#837,1.);+#837 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#838 = PCURVE('',#764,#839);+#839 = DEFINITIONAL_REPRESENTATION('',(#840),#844);+#840 = LINE('',#841,#842);+#841 = CARTESIAN_POINT('',(4.440892098501E-16,1.));+#842 = VECTOR('',#843,1.);+#843 = DIRECTION('',(1.,5.415722071342E-16));+#844 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#845 = PCURVE('',#846,#851);+#846 = PLANE('',#847);+#847 = AXIS2_PLACEMENT_3D('',#848,#849,#850);+#848 = CARTESIAN_POINT('',(1.8,-1.7,0.825));+#849 = DIRECTION('',(0.,0.,1.));+#850 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#851 = DEFINITIONAL_REPRESENTATION('',(#852),#856);+#852 = LINE('',#853,#854);+#853 = CARTESIAN_POINT('',(0.15,3.975));+#854 = VECTOR('',#855,1.);+#855 = DIRECTION('',(0.,-1.));+#856 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#857 = ORIENTED_EDGE('',*,*,#858,.F.);+#858 = EDGE_CURVE('',#859,#831,#861,.T.);+#859 = VERTEX_POINT('',#860);+#860 = CARTESIAN_POINT('',(1.95,-0.84,0.825));+#861 = SURFACE_CURVE('',#862,(#866,#873),.PCURVE_S1.);+#862 = LINE('',#863,#864);+#863 = CARTESIAN_POINT('',(1.95,2.275,0.825));+#864 = VECTOR('',#865,1.);+#865 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#866 = PCURVE('',#764,#867);+#867 = DEFINITIONAL_REPRESENTATION('',(#868),#872);+#868 = LINE('',#869,#870);+#869 = CARTESIAN_POINT('',(4.440892098501E-16,1.));+#870 = VECTOR('',#871,1.);+#871 = DIRECTION('',(1.,2.581914010756E-16));+#872 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#873 = PCURVE('',#874,#879);+#874 = PLANE('',#875);+#875 = AXIS2_PLACEMENT_3D('',#876,#877,#878);+#876 = CARTESIAN_POINT('',(1.95,2.275,1.025));+#877 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#878 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#879 = DEFINITIONAL_REPRESENTATION('',(#880),#884);+#880 = LINE('',#881,#882);+#881 = CARTESIAN_POINT('',(0.,-0.2));+#882 = VECTOR('',#883,1.);+#883 = DIRECTION('',(1.,0.));+#884 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#885 = ORIENTED_EDGE('',*,*,#886,.F.);+#886 = EDGE_CURVE('',#887,#859,#889,.T.);+#887 = VERTEX_POINT('',#888);+#888 = CARTESIAN_POINT('',(1.95,-0.43,0.825));+#889 = SURFACE_CURVE('',#890,(#894,#901),.PCURVE_S1.);+#890 = LINE('',#891,#892);+#891 = CARTESIAN_POINT('',(1.95,2.275,0.825));+#892 = VECTOR('',#893,1.);+#893 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#894 = PCURVE('',#764,#895);+#895 = DEFINITIONAL_REPRESENTATION('',(#896),#900);+#896 = LINE('',#897,#898);+#897 = CARTESIAN_POINT('',(4.440892098501E-16,1.));+#898 = VECTOR('',#899,1.);+#899 = DIRECTION('',(1.,5.415722071342E-16));+#900 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#901 = PCURVE('',#902,#907);+#902 = PLANE('',#903);+#903 = AXIS2_PLACEMENT_3D('',#904,#905,#906);+#904 = CARTESIAN_POINT('',(1.8,-0.43,0.825));+#905 = DIRECTION('',(0.,0.,1.));+#906 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#907 = DEFINITIONAL_REPRESENTATION('',(#908),#912);+#908 = LINE('',#909,#910);+#909 = CARTESIAN_POINT('',(0.15,2.705));+#910 = VECTOR('',#911,1.);+#911 = DIRECTION('',(0.,-1.));+#912 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#913 = ORIENTED_EDGE('',*,*,#914,.F.);+#914 = EDGE_CURVE('',#915,#887,#917,.T.);+#915 = VERTEX_POINT('',#916);+#916 = CARTESIAN_POINT('',(1.95,0.43,0.825));+#917 = SURFACE_CURVE('',#918,(#922,#929),.PCURVE_S1.);+#918 = LINE('',#919,#920);+#919 = CARTESIAN_POINT('',(1.95,2.275,0.825));+#920 = VECTOR('',#921,1.);+#921 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#922 = PCURVE('',#764,#923);+#923 = DEFINITIONAL_REPRESENTATION('',(#924),#928);+#924 = LINE('',#925,#926);+#925 = CARTESIAN_POINT('',(2.22044604925E-16,1.));+#926 = VECTOR('',#927,1.);+#927 = DIRECTION('',(1.,0.));+#928 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#929 = PCURVE('',#930,#935);+#930 = PLANE('',#931);+#931 = AXIS2_PLACEMENT_3D('',#932,#933,#934);+#932 = CARTESIAN_POINT('',(1.95,2.275,1.025));+#933 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#934 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#935 = DEFINITIONAL_REPRESENTATION('',(#936),#940);+#936 = LINE('',#937,#938);+#937 = CARTESIAN_POINT('',(0.,-0.2));+#938 = VECTOR('',#939,1.);+#939 = DIRECTION('',(1.,0.));+#940 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#941 = ORIENTED_EDGE('',*,*,#942,.F.);+#942 = EDGE_CURVE('',#943,#915,#945,.T.);+#943 = VERTEX_POINT('',#944);+#944 = CARTESIAN_POINT('',(1.95,0.84,0.825));+#945 = SURFACE_CURVE('',#946,(#950,#957),.PCURVE_S1.);+#946 = LINE('',#947,#948);+#947 = CARTESIAN_POINT('',(1.95,2.275,0.825));+#948 = VECTOR('',#949,1.);+#949 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#950 = PCURVE('',#764,#951);+#951 = DEFINITIONAL_REPRESENTATION('',(#952),#956);+#952 = LINE('',#953,#954);+#953 = CARTESIAN_POINT('',(2.22044604925E-16,1.));+#954 = VECTOR('',#955,1.);+#955 = DIRECTION('',(1.,0.));+#956 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#957 = PCURVE('',#958,#963);+#958 = PLANE('',#959);+#959 = AXIS2_PLACEMENT_3D('',#960,#961,#962);+#960 = CARTESIAN_POINT('',(1.8,0.84,0.825));+#961 = DIRECTION('',(0.,0.,1.));+#962 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#963 = DEFINITIONAL_REPRESENTATION('',(#964),#968);+#964 = LINE('',#965,#966);+#965 = CARTESIAN_POINT('',(0.15,1.435));+#966 = VECTOR('',#967,1.);+#967 = DIRECTION('',(0.,-1.));+#968 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#969 = ORIENTED_EDGE('',*,*,#970,.F.);+#970 = EDGE_CURVE('',#971,#943,#973,.T.);+#971 = VERTEX_POINT('',#972);+#972 = CARTESIAN_POINT('',(1.95,1.7,0.825));+#973 = SURFACE_CURVE('',#974,(#978,#985),.PCURVE_S1.);+#974 = LINE('',#975,#976);+#975 = CARTESIAN_POINT('',(1.95,2.275,0.825));+#976 = VECTOR('',#977,1.);+#977 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#978 = PCURVE('',#764,#979);+#979 = DEFINITIONAL_REPRESENTATION('',(#980),#984);+#980 = LINE('',#981,#982);+#981 = CARTESIAN_POINT('',(2.22044604925E-16,1.));+#982 = VECTOR('',#983,1.);+#983 = DIRECTION('',(1.,1.290957005378E-16));+#984 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#985 = PCURVE('',#986,#991);+#986 = PLANE('',#987);+#987 = AXIS2_PLACEMENT_3D('',#988,#989,#990);+#988 = CARTESIAN_POINT('',(1.95,2.275,1.025));+#989 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#990 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#991 = DEFINITIONAL_REPRESENTATION('',(#992),#996);+#992 = LINE('',#993,#994);+#993 = CARTESIAN_POINT('',(0.,-0.2));+#994 = VECTOR('',#995,1.);+#995 = DIRECTION('',(1.,0.));+#996 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#997 = ORIENTED_EDGE('',*,*,#998,.F.);+#998 = EDGE_CURVE('',#999,#971,#1001,.T.);+#999 = VERTEX_POINT('',#1000);+#1000 = CARTESIAN_POINT('',(1.95,2.11,0.825));+#1001 = SURFACE_CURVE('',#1002,(#1006,#1013),.PCURVE_S1.);+#1002 = LINE('',#1003,#1004);+#1003 = CARTESIAN_POINT('',(1.95,2.275,0.825));+#1004 = VECTOR('',#1005,1.);+#1005 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1006 = PCURVE('',#764,#1007);+#1007 = DEFINITIONAL_REPRESENTATION('',(#1008),#1012);+#1008 = LINE('',#1009,#1010);+#1009 = CARTESIAN_POINT('',(1.110223024625E-16,1.));+#1010 = VECTOR('',#1011,1.);+#1011 = DIRECTION('',(1.,0.));+#1012 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1013 = PCURVE('',#1014,#1019);+#1014 = PLANE('',#1015);+#1015 = AXIS2_PLACEMENT_3D('',#1016,#1017,#1018);+#1016 = CARTESIAN_POINT('',(1.8,2.11,0.825));+#1017 = DIRECTION('',(0.,0.,1.));+#1018 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#1019 = DEFINITIONAL_REPRESENTATION('',(#1020),#1024);+#1020 = LINE('',#1021,#1022);+#1021 = CARTESIAN_POINT('',(0.15,0.165));+#1022 = VECTOR('',#1023,1.);+#1023 = DIRECTION('',(0.,-1.));+#1024 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1025 = ORIENTED_EDGE('',*,*,#1026,.F.);+#1026 = EDGE_CURVE('',#1027,#999,#1029,.T.);+#1027 = VERTEX_POINT('',#1028);+#1028 = CARTESIAN_POINT('',(1.95,2.275,0.825));+#1029 = SURFACE_CURVE('',#1030,(#1034,#1041),.PCURVE_S1.);+#1030 = LINE('',#1031,#1032);+#1031 = CARTESIAN_POINT('',(1.95,2.275,0.825));+#1032 = VECTOR('',#1033,1.);+#1033 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1034 = PCURVE('',#764,#1035);+#1035 = DEFINITIONAL_REPRESENTATION('',(#1036),#1040);+#1036 = LINE('',#1037,#1038);+#1037 = CARTESIAN_POINT('',(1.978430405897E-17,1.));+#1038 = VECTOR('',#1039,1.);+#1039 = DIRECTION('',(1.,-6.728624391668E-16));+#1040 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1041 = PCURVE('',#1042,#1047);+#1042 = PLANE('',#1043);+#1043 = AXIS2_PLACEMENT_3D('',#1044,#1045,#1046);+#1044 = CARTESIAN_POINT('',(1.95,2.275,1.025));+#1045 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#1046 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1047 = DEFINITIONAL_REPRESENTATION('',(#1048),#1052);+#1048 = LINE('',#1049,#1050);+#1049 = CARTESIAN_POINT('',(0.,-0.2));+#1050 = VECTOR('',#1051,1.);+#1051 = DIRECTION('',(1.,0.));+#1052 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1053 = ORIENTED_EDGE('',*,*,#1054,.F.);+#1054 = EDGE_CURVE('',#780,#1027,#1055,.T.);+#1055 = SURFACE_CURVE('',#1056,(#1059,#1066),.PCURVE_S1.);+#1056 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#1057,#1058),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#1057 = CARTESIAN_POINT('',(1.835171280765,2.217585640382,0.1));+#1058 = CARTESIAN_POINT('',(1.95,2.275,0.825));+#1059 = PCURVE('',#764,#1060);+#1060 = DEFINITIONAL_REPRESENTATION('',(#1061),#1065);+#1061 = LINE('',#1062,#1063);+#1062 = CARTESIAN_POINT('',(-5.279026112648E-16,-7.468886720343E-18));+#1063 = VECTOR('',#1064,1.);+#1064 = DIRECTION('',(5.504038244495E-16,1.));+#1065 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1066 = PCURVE('',#92,#1067);+#1067 = DEFINITIONAL_REPRESENTATION('',(#1068),#1072);+#1068 = LINE('',#1069,#1070);+#1069 = CARTESIAN_POINT('',(0.247487373415,7.001610398739E-17));+#1070 = VECTOR('',#1071,1.);+#1071 = DIRECTION('',(5.551115123126E-16,1.));+#1072 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1073 = ADVANCED_FACE('',(#1074),#1042,.F.);+#1074 = FACE_BOUND('',#1075,.F.);+#1075 = EDGE_LOOP('',(#1076,#1101,#1102,#1130));+#1076 = ORIENTED_EDGE('',*,*,#1077,.F.);+#1077 = EDGE_CURVE('',#1027,#1078,#1080,.T.);+#1078 = VERTEX_POINT('',#1079);+#1079 = CARTESIAN_POINT('',(1.95,2.275,1.025));+#1080 = SURFACE_CURVE('',#1081,(#1084,#1090),.PCURVE_S1.);+#1081 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#1082,#1083),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#1082 = CARTESIAN_POINT('',(1.95,2.275,0.825));+#1083 = CARTESIAN_POINT('',(1.95,2.275,1.025));+#1084 = PCURVE('',#1042,#1085);+#1085 = DEFINITIONAL_REPRESENTATION('',(#1086),#1089);+#1086 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#1087,#1088),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#1087 = CARTESIAN_POINT('',(0.,-0.2));+#1088 = CARTESIAN_POINT('',(0.,0.));+#1089 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1090 = PCURVE('',#1091,#1096);+#1091 = PLANE('',#1092);+#1092 = AXIS2_PLACEMENT_3D('',#1093,#1094,#1095);+#1093 = CARTESIAN_POINT('',(1.775,2.45,1.025));+#1094 = DIRECTION('',(-0.707106781187,-0.707106781187,0.));+#1095 = DIRECTION('',(0.707106781187,-0.707106781187,0.));+#1096 = DEFINITIONAL_REPRESENTATION('',(#1097),#1100);+#1097 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#1098,#1099),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#1098 = CARTESIAN_POINT('',(0.247487373415,-0.2));+#1099 = CARTESIAN_POINT('',(0.247487373415,0.));+#1100 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1101 = ORIENTED_EDGE('',*,*,#1026,.T.);+#1102 = ORIENTED_EDGE('',*,*,#1103,.T.);+#1103 = EDGE_CURVE('',#999,#1104,#1106,.T.);+#1104 = VERTEX_POINT('',#1105);+#1105 = CARTESIAN_POINT('',(1.95,2.11,1.025));+#1106 = SURFACE_CURVE('',#1107,(#1111,#1118),.PCURVE_S1.);+#1107 = LINE('',#1108,#1109);+#1108 = CARTESIAN_POINT('',(1.95,2.11,0.786976568901));+#1109 = VECTOR('',#1110,1.);+#1110 = DIRECTION('',(0.,0.,1.));+#1111 = PCURVE('',#1042,#1112);+#1112 = DEFINITIONAL_REPRESENTATION('',(#1113),#1117);+#1113 = LINE('',#1114,#1115);+#1114 = CARTESIAN_POINT('',(0.165,-0.238023431099));+#1115 = VECTOR('',#1116,1.);+#1116 = DIRECTION('',(0.,1.));+#1117 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1118 = PCURVE('',#1119,#1124);+#1119 = PLANE('',#1120);+#1120 = AXIS2_PLACEMENT_3D('',#1121,#1122,#1123);+#1121 = CARTESIAN_POINT('',(2.42560961319,2.11,0.548953137803));+#1122 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1123 = DIRECTION('',(0.,0.,1.));+#1124 = DEFINITIONAL_REPRESENTATION('',(#1125),#1129);+#1125 = LINE('',#1126,#1127);+#1126 = CARTESIAN_POINT('',(0.238023431098,0.47560961319));+#1127 = VECTOR('',#1128,1.);+#1128 = DIRECTION('',(1.,0.));+#1129 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1130 = ORIENTED_EDGE('',*,*,#1131,.F.);+#1131 = EDGE_CURVE('',#1078,#1104,#1132,.T.);+#1132 = SURFACE_CURVE('',#1133,(#1137,#1144),.PCURVE_S1.);+#1133 = LINE('',#1134,#1135);+#1134 = CARTESIAN_POINT('',(1.95,2.275,1.025));+#1135 = VECTOR('',#1136,1.);+#1136 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1137 = PCURVE('',#1042,#1138);+#1138 = DEFINITIONAL_REPRESENTATION('',(#1139),#1143);+#1139 = LINE('',#1140,#1141);+#1140 = CARTESIAN_POINT('',(0.,0.));+#1141 = VECTOR('',#1142,1.);+#1142 = DIRECTION('',(1.,0.));+#1143 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1144 = PCURVE('',#1145,#1150);+#1145 = PLANE('',#1146);+#1146 = AXIS2_PLACEMENT_3D('',#1147,#1148,#1149);+#1147 = CARTESIAN_POINT('',(-3.027078129022E-16,2.4125,1.025));+#1148 = DIRECTION('',(2.007919022429E-31,-7.713306628828E-27,-1.));+#1149 = DIRECTION('',(1.,1.112083013911E-16,2.00791902242E-31));+#1150 = DEFINITIONAL_REPRESENTATION('',(#1151),#1155);+#1151 = LINE('',#1152,#1153);+#1152 = CARTESIAN_POINT('',(1.95,0.1375));+#1153 = VECTOR('',#1154,1.);+#1154 = DIRECTION('',(-1.859989286E-19,1.));+#1155 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1156 = ADVANCED_FACE('',(#1157,#2170),#1145,.F.);+#1157 = FACE_BOUND('',#1158,.F.);+#1158 = EDGE_LOOP('',(#1159,#1184,#1207,#1228,#1229,#1252,#1280,#1308,+ #1331,#1359,#1387,#1415,#1438,#1466,#1494,#1522,#1545,#1573,#1601,+ #1629,#1652,#1675,#1698,#1721,#1744,#1772,#1800,#1828,#1851,#1879,+ #1907,#1935,#1958,#1986,#2014,#2042,#2065,#2093,#2121,#2149));+#1159 = ORIENTED_EDGE('',*,*,#1160,.T.);+#1160 = EDGE_CURVE('',#1161,#1163,#1165,.T.);+#1161 = VERTEX_POINT('',#1162);+#1162 = CARTESIAN_POINT('',(-1.95,2.275,1.025));+#1163 = VERTEX_POINT('',#1164);+#1164 = CARTESIAN_POINT('',(-1.775,2.45,1.025));+#1165 = SURFACE_CURVE('',#1166,(#1170,#1177),.PCURVE_S1.);+#1166 = LINE('',#1167,#1168);+#1167 = CARTESIAN_POINT('',(-1.95,2.275,1.025));+#1168 = VECTOR('',#1169,1.);+#1169 = DIRECTION('',(0.707106781187,0.707106781187,0.));+#1170 = PCURVE('',#1145,#1171);+#1171 = DEFINITIONAL_REPRESENTATION('',(#1172),#1176);+#1172 = LINE('',#1173,#1174);+#1173 = CARTESIAN_POINT('',(-1.95,0.1375));+#1174 = VECTOR('',#1175,1.);+#1175 = DIRECTION('',(0.707106781187,-0.707106781187));+#1176 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1177 = PCURVE('',#199,#1178);+#1178 = DEFINITIONAL_REPRESENTATION('',(#1179),#1183);+#1179 = LINE('',#1180,#1181);+#1180 = CARTESIAN_POINT('',(0.,0.));+#1181 = VECTOR('',#1182,1.);+#1182 = DIRECTION('',(1.,0.));+#1183 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1184 = ORIENTED_EDGE('',*,*,#1185,.T.);+#1185 = EDGE_CURVE('',#1163,#1186,#1188,.T.);+#1186 = VERTEX_POINT('',#1187);+#1187 = CARTESIAN_POINT('',(1.775,2.45,1.025));+#1188 = SURFACE_CURVE('',#1189,(#1193,#1200),.PCURVE_S1.);+#1189 = LINE('',#1190,#1191);+#1190 = CARTESIAN_POINT('',(-1.775,2.45,1.025));+#1191 = VECTOR('',#1192,1.);+#1192 = DIRECTION('',(1.,1.110223024625E-16,0.));+#1193 = PCURVE('',#1145,#1194);+#1194 = DEFINITIONAL_REPRESENTATION('',(#1195),#1199);+#1195 = LINE('',#1196,#1197);+#1196 = CARTESIAN_POINT('',(-1.775,-3.75E-02));+#1197 = VECTOR('',#1198,1.);+#1198 = DIRECTION('',(1.,1.859989286E-19));+#1199 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1200 = PCURVE('',#120,#1201);+#1201 = DEFINITIONAL_REPRESENTATION('',(#1202),#1206);+#1202 = LINE('',#1203,#1204);+#1203 = CARTESIAN_POINT('',(0.,0.));+#1204 = VECTOR('',#1205,1.);+#1205 = DIRECTION('',(1.,0.));+#1206 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1207 = ORIENTED_EDGE('',*,*,#1208,.T.);+#1208 = EDGE_CURVE('',#1186,#1078,#1209,.T.);+#1209 = SURFACE_CURVE('',#1210,(#1214,#1221),.PCURVE_S1.);+#1210 = LINE('',#1211,#1212);+#1211 = CARTESIAN_POINT('',(1.775,2.45,1.025));+#1212 = VECTOR('',#1213,1.);+#1213 = DIRECTION('',(0.707106781187,-0.707106781187,0.));+#1214 = PCURVE('',#1145,#1215);+#1215 = DEFINITIONAL_REPRESENTATION('',(#1216),#1220);+#1216 = LINE('',#1217,#1218);+#1217 = CARTESIAN_POINT('',(1.775,-3.75E-02));+#1218 = VECTOR('',#1219,1.);+#1219 = DIRECTION('',(0.707106781187,0.707106781187));+#1220 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1221 = PCURVE('',#1091,#1222);+#1222 = DEFINITIONAL_REPRESENTATION('',(#1223),#1227);+#1223 = LINE('',#1224,#1225);+#1224 = CARTESIAN_POINT('',(0.,0.));+#1225 = VECTOR('',#1226,1.);+#1226 = DIRECTION('',(1.,0.));+#1227 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1228 = ORIENTED_EDGE('',*,*,#1131,.T.);+#1229 = ORIENTED_EDGE('',*,*,#1230,.F.);+#1230 = EDGE_CURVE('',#1231,#1104,#1233,.T.);+#1231 = VERTEX_POINT('',#1232);+#1232 = CARTESIAN_POINT('',(2.25,2.11,1.025));+#1233 = SURFACE_CURVE('',#1234,(#1238,#1245),.PCURVE_S1.);+#1234 = LINE('',#1235,#1236);+#1235 = CARTESIAN_POINT('',(2.25,2.11,1.025));+#1236 = VECTOR('',#1237,1.);+#1237 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#1238 = PCURVE('',#1145,#1239);+#1239 = DEFINITIONAL_REPRESENTATION('',(#1240),#1244);+#1240 = LINE('',#1241,#1242);+#1241 = CARTESIAN_POINT('',(2.25,0.3025));+#1242 = VECTOR('',#1243,1.);+#1243 = DIRECTION('',(-1.,-1.859989286E-19));+#1244 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1245 = PCURVE('',#1119,#1246);+#1246 = DEFINITIONAL_REPRESENTATION('',(#1247),#1251);+#1247 = LINE('',#1248,#1249);+#1248 = CARTESIAN_POINT('',(0.476046862197,0.17560961319));+#1249 = VECTOR('',#1250,1.);+#1250 = DIRECTION('',(0.,1.));+#1251 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1252 = ORIENTED_EDGE('',*,*,#1253,.T.);+#1253 = EDGE_CURVE('',#1231,#1254,#1256,.T.);+#1254 = VERTEX_POINT('',#1255);+#1255 = CARTESIAN_POINT('',(2.25,1.7,1.025));+#1256 = SURFACE_CURVE('',#1257,(#1261,#1268),.PCURVE_S1.);+#1257 = LINE('',#1258,#1259);+#1258 = CARTESIAN_POINT('',(2.25,2.11,1.025));+#1259 = VECTOR('',#1260,1.);+#1260 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1261 = PCURVE('',#1145,#1262);+#1262 = DEFINITIONAL_REPRESENTATION('',(#1263),#1267);+#1263 = LINE('',#1264,#1265);+#1264 = CARTESIAN_POINT('',(2.25,0.3025));+#1265 = VECTOR('',#1266,1.);+#1266 = DIRECTION('',(-1.859989286E-19,1.));+#1267 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1268 = PCURVE('',#1269,#1274);+#1269 = CYLINDRICAL_SURFACE('',#1270,0.3);+#1270 = AXIS2_PLACEMENT_3D('',#1271,#1272,#1273);+#1271 = CARTESIAN_POINT('',(2.25,2.11,0.725));+#1272 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#1273 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667)+ );+#1274 = DEFINITIONAL_REPRESENTATION('',(#1275),#1279);+#1275 = LINE('',#1276,#1277);+#1276 = CARTESIAN_POINT('',(4.886921905584,0.));+#1277 = VECTOR('',#1278,1.);+#1278 = DIRECTION('',(-4.332577657074E-15,-1.));+#1279 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1280 = ORIENTED_EDGE('',*,*,#1281,.T.);+#1281 = EDGE_CURVE('',#1254,#1282,#1284,.T.);+#1282 = VERTEX_POINT('',#1283);+#1283 = CARTESIAN_POINT('',(1.95,1.7,1.025));+#1284 = SURFACE_CURVE('',#1285,(#1289,#1296),.PCURVE_S1.);+#1285 = LINE('',#1286,#1287);+#1286 = CARTESIAN_POINT('',(2.25,1.7,1.025));+#1287 = VECTOR('',#1288,1.);+#1288 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#1289 = PCURVE('',#1145,#1290);+#1290 = DEFINITIONAL_REPRESENTATION('',(#1291),#1295);+#1291 = LINE('',#1292,#1293);+#1292 = CARTESIAN_POINT('',(2.25,0.7125));+#1293 = VECTOR('',#1294,1.);+#1294 = DIRECTION('',(-1.,-1.859989286E-19));+#1295 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1296 = PCURVE('',#1297,#1302);+#1297 = PLANE('',#1298);+#1298 = AXIS2_PLACEMENT_3D('',#1299,#1300,#1301);+#1299 = CARTESIAN_POINT('',(2.42560961319,1.7,0.548953137803));+#1300 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1301 = DIRECTION('',(0.,0.,1.));+#1302 = DEFINITIONAL_REPRESENTATION('',(#1303),#1307);+#1303 = LINE('',#1304,#1305);+#1304 = CARTESIAN_POINT('',(0.476046862197,0.17560961319));+#1305 = VECTOR('',#1306,1.);+#1306 = DIRECTION('',(0.,1.));+#1307 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1308 = ORIENTED_EDGE('',*,*,#1309,.T.);+#1309 = EDGE_CURVE('',#1282,#1310,#1312,.T.);+#1310 = VERTEX_POINT('',#1311);+#1311 = CARTESIAN_POINT('',(1.95,0.84,1.025));+#1312 = SURFACE_CURVE('',#1313,(#1317,#1324),.PCURVE_S1.);+#1313 = LINE('',#1314,#1315);+#1314 = CARTESIAN_POINT('',(1.95,2.275,1.025));+#1315 = VECTOR('',#1316,1.);+#1316 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1317 = PCURVE('',#1145,#1318);+#1318 = DEFINITIONAL_REPRESENTATION('',(#1319),#1323);+#1319 = LINE('',#1320,#1321);+#1320 = CARTESIAN_POINT('',(1.95,0.1375));+#1321 = VECTOR('',#1322,1.);+#1322 = DIRECTION('',(-1.859989286E-19,1.));+#1323 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1324 = PCURVE('',#986,#1325);+#1325 = DEFINITIONAL_REPRESENTATION('',(#1326),#1330);+#1326 = LINE('',#1327,#1328);+#1327 = CARTESIAN_POINT('',(0.,0.));+#1328 = VECTOR('',#1329,1.);+#1329 = DIRECTION('',(1.,0.));+#1330 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1331 = ORIENTED_EDGE('',*,*,#1332,.F.);+#1332 = EDGE_CURVE('',#1333,#1310,#1335,.T.);+#1333 = VERTEX_POINT('',#1334);+#1334 = CARTESIAN_POINT('',(2.25,0.84,1.025));+#1335 = SURFACE_CURVE('',#1336,(#1340,#1347),.PCURVE_S1.);+#1336 = LINE('',#1337,#1338);+#1337 = CARTESIAN_POINT('',(2.25,0.84,1.025));+#1338 = VECTOR('',#1339,1.);+#1339 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#1340 = PCURVE('',#1145,#1341);+#1341 = DEFINITIONAL_REPRESENTATION('',(#1342),#1346);+#1342 = LINE('',#1343,#1344);+#1343 = CARTESIAN_POINT('',(2.25,1.5725));+#1344 = VECTOR('',#1345,1.);+#1345 = DIRECTION('',(-1.,-1.859989286E-19));+#1346 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1347 = PCURVE('',#1348,#1353);+#1348 = PLANE('',#1349);+#1349 = AXIS2_PLACEMENT_3D('',#1350,#1351,#1352);+#1350 = CARTESIAN_POINT('',(2.42560961319,0.84,0.548953137803));+#1351 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1352 = DIRECTION('',(0.,0.,1.));+#1353 = DEFINITIONAL_REPRESENTATION('',(#1354),#1358);+#1354 = LINE('',#1355,#1356);+#1355 = CARTESIAN_POINT('',(0.476046862197,0.17560961319));+#1356 = VECTOR('',#1357,1.);+#1357 = DIRECTION('',(0.,1.));+#1358 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1359 = ORIENTED_EDGE('',*,*,#1360,.T.);+#1360 = EDGE_CURVE('',#1333,#1361,#1363,.T.);+#1361 = VERTEX_POINT('',#1362);+#1362 = CARTESIAN_POINT('',(2.25,0.43,1.025));+#1363 = SURFACE_CURVE('',#1364,(#1368,#1375),.PCURVE_S1.);+#1364 = LINE('',#1365,#1366);+#1365 = CARTESIAN_POINT('',(2.25,0.84,1.025));+#1366 = VECTOR('',#1367,1.);+#1367 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1368 = PCURVE('',#1145,#1369);+#1369 = DEFINITIONAL_REPRESENTATION('',(#1370),#1374);+#1370 = LINE('',#1371,#1372);+#1371 = CARTESIAN_POINT('',(2.25,1.5725));+#1372 = VECTOR('',#1373,1.);+#1373 = DIRECTION('',(-1.859989286E-19,1.));+#1374 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1375 = PCURVE('',#1376,#1381);+#1376 = CYLINDRICAL_SURFACE('',#1377,0.3);+#1377 = AXIS2_PLACEMENT_3D('',#1378,#1379,#1380);+#1378 = CARTESIAN_POINT('',(2.25,0.84,0.725));+#1379 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#1380 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667)+ );+#1381 = DEFINITIONAL_REPRESENTATION('',(#1382),#1386);+#1382 = LINE('',#1383,#1384);+#1383 = CARTESIAN_POINT('',(4.886921905584,0.));+#1384 = VECTOR('',#1385,1.);+#1385 = DIRECTION('',(0.,-1.));+#1386 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1387 = ORIENTED_EDGE('',*,*,#1388,.T.);+#1388 = EDGE_CURVE('',#1361,#1389,#1391,.T.);+#1389 = VERTEX_POINT('',#1390);+#1390 = CARTESIAN_POINT('',(1.95,0.43,1.025));+#1391 = SURFACE_CURVE('',#1392,(#1396,#1403),.PCURVE_S1.);+#1392 = LINE('',#1393,#1394);+#1393 = CARTESIAN_POINT('',(2.25,0.43,1.025));+#1394 = VECTOR('',#1395,1.);+#1395 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#1396 = PCURVE('',#1145,#1397);+#1397 = DEFINITIONAL_REPRESENTATION('',(#1398),#1402);+#1398 = LINE('',#1399,#1400);+#1399 = CARTESIAN_POINT('',(2.25,1.9825));+#1400 = VECTOR('',#1401,1.);+#1401 = DIRECTION('',(-1.,-1.859989286E-19));+#1402 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1403 = PCURVE('',#1404,#1409);+#1404 = PLANE('',#1405);+#1405 = AXIS2_PLACEMENT_3D('',#1406,#1407,#1408);+#1406 = CARTESIAN_POINT('',(2.42560961319,0.43,0.548953137803));+#1407 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1408 = DIRECTION('',(0.,0.,1.));+#1409 = DEFINITIONAL_REPRESENTATION('',(#1410),#1414);+#1410 = LINE('',#1411,#1412);+#1411 = CARTESIAN_POINT('',(0.476046862197,0.17560961319));+#1412 = VECTOR('',#1413,1.);+#1413 = DIRECTION('',(0.,1.));+#1414 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1415 = ORIENTED_EDGE('',*,*,#1416,.T.);+#1416 = EDGE_CURVE('',#1389,#1417,#1419,.T.);+#1417 = VERTEX_POINT('',#1418);+#1418 = CARTESIAN_POINT('',(1.95,-0.43,1.025));+#1419 = SURFACE_CURVE('',#1420,(#1424,#1431),.PCURVE_S1.);+#1420 = LINE('',#1421,#1422);+#1421 = CARTESIAN_POINT('',(1.95,2.275,1.025));+#1422 = VECTOR('',#1423,1.);+#1423 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1424 = PCURVE('',#1145,#1425);+#1425 = DEFINITIONAL_REPRESENTATION('',(#1426),#1430);+#1426 = LINE('',#1427,#1428);+#1427 = CARTESIAN_POINT('',(1.95,0.1375));+#1428 = VECTOR('',#1429,1.);+#1429 = DIRECTION('',(-1.859989286E-19,1.));+#1430 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1431 = PCURVE('',#930,#1432);+#1432 = DEFINITIONAL_REPRESENTATION('',(#1433),#1437);+#1433 = LINE('',#1434,#1435);+#1434 = CARTESIAN_POINT('',(0.,0.));+#1435 = VECTOR('',#1436,1.);+#1436 = DIRECTION('',(1.,0.));+#1437 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1438 = ORIENTED_EDGE('',*,*,#1439,.F.);+#1439 = EDGE_CURVE('',#1440,#1417,#1442,.T.);+#1440 = VERTEX_POINT('',#1441);+#1441 = CARTESIAN_POINT('',(2.25,-0.43,1.025));+#1442 = SURFACE_CURVE('',#1443,(#1447,#1454),.PCURVE_S1.);+#1443 = LINE('',#1444,#1445);+#1444 = CARTESIAN_POINT('',(2.25,-0.43,1.025));+#1445 = VECTOR('',#1446,1.);+#1446 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#1447 = PCURVE('',#1145,#1448);+#1448 = DEFINITIONAL_REPRESENTATION('',(#1449),#1453);+#1449 = LINE('',#1450,#1451);+#1450 = CARTESIAN_POINT('',(2.25,2.8425));+#1451 = VECTOR('',#1452,1.);+#1452 = DIRECTION('',(-1.,-1.859989286E-19));+#1453 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1454 = PCURVE('',#1455,#1460);+#1455 = PLANE('',#1456);+#1456 = AXIS2_PLACEMENT_3D('',#1457,#1458,#1459);+#1457 = CARTESIAN_POINT('',(2.42560961319,-0.43,0.548953137803));+#1458 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1459 = DIRECTION('',(0.,0.,1.));+#1460 = DEFINITIONAL_REPRESENTATION('',(#1461),#1465);+#1461 = LINE('',#1462,#1463);+#1462 = CARTESIAN_POINT('',(0.476046862197,0.17560961319));+#1463 = VECTOR('',#1464,1.);+#1464 = DIRECTION('',(0.,1.));+#1465 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1466 = ORIENTED_EDGE('',*,*,#1467,.T.);+#1467 = EDGE_CURVE('',#1440,#1468,#1470,.T.);+#1468 = VERTEX_POINT('',#1469);+#1469 = CARTESIAN_POINT('',(2.25,-0.84,1.025));+#1470 = SURFACE_CURVE('',#1471,(#1475,#1482),.PCURVE_S1.);+#1471 = LINE('',#1472,#1473);+#1472 = CARTESIAN_POINT('',(2.25,-0.43,1.025));+#1473 = VECTOR('',#1474,1.);+#1474 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1475 = PCURVE('',#1145,#1476);+#1476 = DEFINITIONAL_REPRESENTATION('',(#1477),#1481);+#1477 = LINE('',#1478,#1479);+#1478 = CARTESIAN_POINT('',(2.25,2.8425));+#1479 = VECTOR('',#1480,1.);+#1480 = DIRECTION('',(-1.859989286E-19,1.));+#1481 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1482 = PCURVE('',#1483,#1488);+#1483 = CYLINDRICAL_SURFACE('',#1484,0.3);+#1484 = AXIS2_PLACEMENT_3D('',#1485,#1486,#1487);+#1485 = CARTESIAN_POINT('',(2.25,-0.43,0.725));+#1486 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#1487 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667)+ );+#1488 = DEFINITIONAL_REPRESENTATION('',(#1489),#1493);+#1489 = LINE('',#1490,#1491);+#1490 = CARTESIAN_POINT('',(4.886921905584,0.));+#1491 = VECTOR('',#1492,1.);+#1492 = DIRECTION('',(0.,-1.));+#1493 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1494 = ORIENTED_EDGE('',*,*,#1495,.T.);+#1495 = EDGE_CURVE('',#1468,#1496,#1498,.T.);+#1496 = VERTEX_POINT('',#1497);+#1497 = CARTESIAN_POINT('',(1.95,-0.84,1.025));+#1498 = SURFACE_CURVE('',#1499,(#1503,#1510),.PCURVE_S1.);+#1499 = LINE('',#1500,#1501);+#1500 = CARTESIAN_POINT('',(2.25,-0.84,1.025));+#1501 = VECTOR('',#1502,1.);+#1502 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#1503 = PCURVE('',#1145,#1504);+#1504 = DEFINITIONAL_REPRESENTATION('',(#1505),#1509);+#1505 = LINE('',#1506,#1507);+#1506 = CARTESIAN_POINT('',(2.25,3.2525));+#1507 = VECTOR('',#1508,1.);+#1508 = DIRECTION('',(-1.,-1.859989286E-19));+#1509 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1510 = PCURVE('',#1511,#1516);+#1511 = PLANE('',#1512);+#1512 = AXIS2_PLACEMENT_3D('',#1513,#1514,#1515);+#1513 = CARTESIAN_POINT('',(2.42560961319,-0.84,0.548953137803));+#1514 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1515 = DIRECTION('',(0.,0.,1.));+#1516 = DEFINITIONAL_REPRESENTATION('',(#1517),#1521);+#1517 = LINE('',#1518,#1519);+#1518 = CARTESIAN_POINT('',(0.476046862197,0.17560961319));+#1519 = VECTOR('',#1520,1.);+#1520 = DIRECTION('',(0.,1.));+#1521 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1522 = ORIENTED_EDGE('',*,*,#1523,.T.);+#1523 = EDGE_CURVE('',#1496,#1524,#1526,.T.);+#1524 = VERTEX_POINT('',#1525);+#1525 = CARTESIAN_POINT('',(1.95,-1.7,1.025));+#1526 = SURFACE_CURVE('',#1527,(#1531,#1538),.PCURVE_S1.);+#1527 = LINE('',#1528,#1529);+#1528 = CARTESIAN_POINT('',(1.95,2.275,1.025));+#1529 = VECTOR('',#1530,1.);+#1530 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1531 = PCURVE('',#1145,#1532);+#1532 = DEFINITIONAL_REPRESENTATION('',(#1533),#1537);+#1533 = LINE('',#1534,#1535);+#1534 = CARTESIAN_POINT('',(1.95,0.1375));+#1535 = VECTOR('',#1536,1.);+#1536 = DIRECTION('',(-1.859989286E-19,1.));+#1537 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1538 = PCURVE('',#874,#1539);+#1539 = DEFINITIONAL_REPRESENTATION('',(#1540),#1544);+#1540 = LINE('',#1541,#1542);+#1541 = CARTESIAN_POINT('',(0.,0.));+#1542 = VECTOR('',#1543,1.);+#1543 = DIRECTION('',(1.,0.));+#1544 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1545 = ORIENTED_EDGE('',*,*,#1546,.F.);+#1546 = EDGE_CURVE('',#1547,#1524,#1549,.T.);+#1547 = VERTEX_POINT('',#1548);+#1548 = CARTESIAN_POINT('',(2.25,-1.7,1.025));+#1549 = SURFACE_CURVE('',#1550,(#1554,#1561),.PCURVE_S1.);+#1550 = LINE('',#1551,#1552);+#1551 = CARTESIAN_POINT('',(2.25,-1.7,1.025));+#1552 = VECTOR('',#1553,1.);+#1553 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#1554 = PCURVE('',#1145,#1555);+#1555 = DEFINITIONAL_REPRESENTATION('',(#1556),#1560);+#1556 = LINE('',#1557,#1558);+#1557 = CARTESIAN_POINT('',(2.25,4.1125));+#1558 = VECTOR('',#1559,1.);+#1559 = DIRECTION('',(-1.,-1.859989286E-19));+#1560 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1561 = PCURVE('',#1562,#1567);+#1562 = PLANE('',#1563);+#1563 = AXIS2_PLACEMENT_3D('',#1564,#1565,#1566);+#1564 = CARTESIAN_POINT('',(2.42560961319,-1.7,0.548953137803));+#1565 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1566 = DIRECTION('',(0.,0.,1.));+#1567 = DEFINITIONAL_REPRESENTATION('',(#1568),#1572);+#1568 = LINE('',#1569,#1570);+#1569 = CARTESIAN_POINT('',(0.476046862197,0.17560961319));+#1570 = VECTOR('',#1571,1.);+#1571 = DIRECTION('',(0.,1.));+#1572 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1573 = ORIENTED_EDGE('',*,*,#1574,.T.);+#1574 = EDGE_CURVE('',#1547,#1575,#1577,.T.);+#1575 = VERTEX_POINT('',#1576);+#1576 = CARTESIAN_POINT('',(2.25,-2.11,1.025));+#1577 = SURFACE_CURVE('',#1578,(#1582,#1589),.PCURVE_S1.);+#1578 = LINE('',#1579,#1580);+#1579 = CARTESIAN_POINT('',(2.25,-1.7,1.025));+#1580 = VECTOR('',#1581,1.);+#1581 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1582 = PCURVE('',#1145,#1583);+#1583 = DEFINITIONAL_REPRESENTATION('',(#1584),#1588);+#1584 = LINE('',#1585,#1586);+#1585 = CARTESIAN_POINT('',(2.25,4.1125));+#1586 = VECTOR('',#1587,1.);+#1587 = DIRECTION('',(-1.859989286E-19,1.));+#1588 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1589 = PCURVE('',#1590,#1595);+#1590 = CYLINDRICAL_SURFACE('',#1591,0.3);+#1591 = AXIS2_PLACEMENT_3D('',#1592,#1593,#1594);+#1592 = CARTESIAN_POINT('',(2.25,-1.7,0.725));+#1593 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#1594 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667)+ );+#1595 = DEFINITIONAL_REPRESENTATION('',(#1596),#1600);+#1596 = LINE('',#1597,#1598);+#1597 = CARTESIAN_POINT('',(4.886921905584,0.));+#1598 = VECTOR('',#1599,1.);+#1599 = DIRECTION('',(-4.332577657074E-15,-1.));+#1600 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1601 = ORIENTED_EDGE('',*,*,#1602,.T.);+#1602 = EDGE_CURVE('',#1575,#1603,#1605,.T.);+#1603 = VERTEX_POINT('',#1604);+#1604 = CARTESIAN_POINT('',(1.95,-2.11,1.025));+#1605 = SURFACE_CURVE('',#1606,(#1610,#1617),.PCURVE_S1.);+#1606 = LINE('',#1607,#1608);+#1607 = CARTESIAN_POINT('',(2.25,-2.11,1.025));+#1608 = VECTOR('',#1609,1.);+#1609 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#1610 = PCURVE('',#1145,#1611);+#1611 = DEFINITIONAL_REPRESENTATION('',(#1612),#1616);+#1612 = LINE('',#1613,#1614);+#1613 = CARTESIAN_POINT('',(2.25,4.5225));+#1614 = VECTOR('',#1615,1.);+#1615 = DIRECTION('',(-1.,-1.859989286E-19));+#1616 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1617 = PCURVE('',#1618,#1623);+#1618 = PLANE('',#1619);+#1619 = AXIS2_PLACEMENT_3D('',#1620,#1621,#1622);+#1620 = CARTESIAN_POINT('',(2.42560961319,-2.11,0.548953137803));+#1621 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1622 = DIRECTION('',(0.,0.,1.));+#1623 = DEFINITIONAL_REPRESENTATION('',(#1624),#1628);+#1624 = LINE('',#1625,#1626);+#1625 = CARTESIAN_POINT('',(0.476046862197,0.17560961319));+#1626 = VECTOR('',#1627,1.);+#1627 = DIRECTION('',(0.,1.));+#1628 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1629 = ORIENTED_EDGE('',*,*,#1630,.T.);+#1630 = EDGE_CURVE('',#1603,#1631,#1633,.T.);+#1631 = VERTEX_POINT('',#1632);+#1632 = CARTESIAN_POINT('',(1.95,-2.275,1.025));+#1633 = SURFACE_CURVE('',#1634,(#1638,#1645),.PCURVE_S1.);+#1634 = LINE('',#1635,#1636);+#1635 = CARTESIAN_POINT('',(1.95,2.275,1.025));+#1636 = VECTOR('',#1637,1.);+#1637 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1638 = PCURVE('',#1145,#1639);+#1639 = DEFINITIONAL_REPRESENTATION('',(#1640),#1644);+#1640 = LINE('',#1641,#1642);+#1641 = CARTESIAN_POINT('',(1.95,0.1375));+#1642 = VECTOR('',#1643,1.);+#1643 = DIRECTION('',(-1.859989286E-19,1.));+#1644 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1645 = PCURVE('',#818,#1646);+#1646 = DEFINITIONAL_REPRESENTATION('',(#1647),#1651);+#1647 = LINE('',#1648,#1649);+#1648 = CARTESIAN_POINT('',(0.,0.));+#1649 = VECTOR('',#1650,1.);+#1650 = DIRECTION('',(1.,0.));+#1651 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1652 = ORIENTED_EDGE('',*,*,#1653,.T.);+#1653 = EDGE_CURVE('',#1631,#1654,#1656,.T.);+#1654 = VERTEX_POINT('',#1655);+#1655 = CARTESIAN_POINT('',(1.775,-2.45,1.025));+#1656 = SURFACE_CURVE('',#1657,(#1661,#1668),.PCURVE_S1.);+#1657 = LINE('',#1658,#1659);+#1658 = CARTESIAN_POINT('',(1.95,-2.275,1.025));+#1659 = VECTOR('',#1660,1.);+#1660 = DIRECTION('',(-0.707106781187,-0.707106781187,0.));+#1661 = PCURVE('',#1145,#1662);+#1662 = DEFINITIONAL_REPRESENTATION('',(#1663),#1667);+#1663 = LINE('',#1664,#1665);+#1664 = CARTESIAN_POINT('',(1.95,4.6875));+#1665 = VECTOR('',#1666,1.);+#1666 = DIRECTION('',(-0.707106781187,0.707106781187));+#1667 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1668 = PCURVE('',#739,#1669);+#1669 = DEFINITIONAL_REPRESENTATION('',(#1670),#1674);+#1670 = LINE('',#1671,#1672);+#1671 = CARTESIAN_POINT('',(0.,0.));+#1672 = VECTOR('',#1673,1.);+#1673 = DIRECTION('',(1.,0.));+#1674 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1675 = ORIENTED_EDGE('',*,*,#1676,.T.);+#1676 = EDGE_CURVE('',#1654,#1677,#1679,.T.);+#1677 = VERTEX_POINT('',#1678);+#1678 = CARTESIAN_POINT('',(-1.775,-2.45,1.025));+#1679 = SURFACE_CURVE('',#1680,(#1684,#1691),.PCURVE_S1.);+#1680 = LINE('',#1681,#1682);+#1681 = CARTESIAN_POINT('',(1.775,-2.45,1.025));+#1682 = VECTOR('',#1683,1.);+#1683 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#1684 = PCURVE('',#1145,#1685);+#1685 = DEFINITIONAL_REPRESENTATION('',(#1686),#1690);+#1686 = LINE('',#1687,#1688);+#1687 = CARTESIAN_POINT('',(1.775,4.8625));+#1688 = VECTOR('',#1689,1.);+#1689 = DIRECTION('',(-1.,-1.859989286E-19));+#1690 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1691 = PCURVE('',#660,#1692);+#1692 = DEFINITIONAL_REPRESENTATION('',(#1693),#1697);+#1693 = LINE('',#1694,#1695);+#1694 = CARTESIAN_POINT('',(0.,0.));+#1695 = VECTOR('',#1696,1.);+#1696 = DIRECTION('',(1.,0.));+#1697 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1698 = ORIENTED_EDGE('',*,*,#1699,.T.);+#1699 = EDGE_CURVE('',#1677,#1700,#1702,.T.);+#1700 = VERTEX_POINT('',#1701);+#1701 = CARTESIAN_POINT('',(-1.95,-2.275,1.025));+#1702 = SURFACE_CURVE('',#1703,(#1707,#1714),.PCURVE_S1.);+#1703 = LINE('',#1704,#1705);+#1704 = CARTESIAN_POINT('',(-1.775,-2.45,1.025));+#1705 = VECTOR('',#1706,1.);+#1706 = DIRECTION('',(-0.707106781187,0.707106781187,0.));+#1707 = PCURVE('',#1145,#1708);+#1708 = DEFINITIONAL_REPRESENTATION('',(#1709),#1713);+#1709 = LINE('',#1710,#1711);+#1710 = CARTESIAN_POINT('',(-1.775,4.8625));+#1711 = VECTOR('',#1712,1.);+#1712 = DIRECTION('',(-0.707106781187,-0.707106781187));+#1713 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1714 = PCURVE('',#581,#1715);+#1715 = DEFINITIONAL_REPRESENTATION('',(#1716),#1720);+#1716 = LINE('',#1717,#1718);+#1717 = CARTESIAN_POINT('',(0.,0.));+#1718 = VECTOR('',#1719,1.);+#1719 = DIRECTION('',(1.,0.));+#1720 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1721 = ORIENTED_EDGE('',*,*,#1722,.T.);+#1722 = EDGE_CURVE('',#1700,#1723,#1725,.T.);+#1723 = VERTEX_POINT('',#1724);+#1724 = CARTESIAN_POINT('',(-1.95,-2.11,1.025));+#1725 = SURFACE_CURVE('',#1726,(#1730,#1737),.PCURVE_S1.);+#1726 = LINE('',#1727,#1728);+#1727 = CARTESIAN_POINT('',(-1.95,-2.275,1.025));+#1728 = VECTOR('',#1729,1.);+#1729 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#1730 = PCURVE('',#1145,#1731);+#1731 = DEFINITIONAL_REPRESENTATION('',(#1732),#1736);+#1732 = LINE('',#1733,#1734);+#1733 = CARTESIAN_POINT('',(-1.95,4.6875));+#1734 = VECTOR('',#1735,1.);+#1735 = DIRECTION('',(1.859989286E-19,-1.));+#1736 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1737 = PCURVE('',#502,#1738);+#1738 = DEFINITIONAL_REPRESENTATION('',(#1739),#1743);+#1739 = LINE('',#1740,#1741);+#1740 = CARTESIAN_POINT('',(0.,0.));+#1741 = VECTOR('',#1742,1.);+#1742 = DIRECTION('',(1.,0.));+#1743 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1744 = ORIENTED_EDGE('',*,*,#1745,.F.);+#1745 = EDGE_CURVE('',#1746,#1723,#1748,.T.);+#1746 = VERTEX_POINT('',#1747);+#1747 = CARTESIAN_POINT('',(-2.25,-2.11,1.025));+#1748 = SURFACE_CURVE('',#1749,(#1753,#1760),.PCURVE_S1.);+#1749 = LINE('',#1750,#1751);+#1750 = CARTESIAN_POINT('',(-2.25,-2.11,1.025));+#1751 = VECTOR('',#1752,1.);+#1752 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#1753 = PCURVE('',#1145,#1754);+#1754 = DEFINITIONAL_REPRESENTATION('',(#1755),#1759);+#1755 = LINE('',#1756,#1757);+#1756 = CARTESIAN_POINT('',(-2.25,4.5225));+#1757 = VECTOR('',#1758,1.);+#1758 = DIRECTION('',(1.,1.226506788433E-16));+#1759 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1760 = PCURVE('',#1761,#1766);+#1761 = PLANE('',#1762);+#1762 = AXIS2_PLACEMENT_3D('',#1763,#1764,#1765);+#1763 = CARTESIAN_POINT('',(-2.42560961319,-2.11,0.548953137803));+#1764 = DIRECTION('',(1.144237745222E-17,1.,0.));+#1765 = DIRECTION('',(0.,-0.,1.));+#1766 = DEFINITIONAL_REPRESENTATION('',(#1767),#1771);+#1767 = LINE('',#1768,#1769);+#1768 = CARTESIAN_POINT('',(0.476046862197,0.17560961319));+#1769 = VECTOR('',#1770,1.);+#1770 = DIRECTION('',(0.,1.));+#1771 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1772 = ORIENTED_EDGE('',*,*,#1773,.T.);+#1773 = EDGE_CURVE('',#1746,#1774,#1776,.T.);+#1774 = VERTEX_POINT('',#1775);+#1775 = CARTESIAN_POINT('',(-2.25,-1.7,1.025));+#1776 = SURFACE_CURVE('',#1777,(#1781,#1788),.PCURVE_S1.);+#1777 = LINE('',#1778,#1779);+#1778 = CARTESIAN_POINT('',(-2.25,-2.11,1.025));+#1779 = VECTOR('',#1780,1.);+#1780 = DIRECTION('',(1.144237745222E-17,1.,0.));+#1781 = PCURVE('',#1145,#1782);+#1782 = DEFINITIONAL_REPRESENTATION('',(#1783),#1787);+#1783 = LINE('',#1784,#1785);+#1784 = CARTESIAN_POINT('',(-2.25,4.5225));+#1785 = VECTOR('',#1786,1.);+#1786 = DIRECTION('',(1.226506788433E-16,-1.));+#1787 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1788 = PCURVE('',#1789,#1794);+#1789 = CYLINDRICAL_SURFACE('',#1790,0.3);+#1790 = AXIS2_PLACEMENT_3D('',#1791,#1792,#1793);+#1791 = CARTESIAN_POINT('',(-2.25,-2.11,0.725));+#1792 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#1793 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667)+ );+#1794 = DEFINITIONAL_REPRESENTATION('',(#1795),#1799);+#1795 = LINE('',#1796,#1797);+#1796 = CARTESIAN_POINT('',(4.886921905584,0.));+#1797 = VECTOR('',#1798,1.);+#1798 = DIRECTION('',(0.,-1.));+#1799 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1800 = ORIENTED_EDGE('',*,*,#1801,.T.);+#1801 = EDGE_CURVE('',#1774,#1802,#1804,.T.);+#1802 = VERTEX_POINT('',#1803);+#1803 = CARTESIAN_POINT('',(-1.95,-1.7,1.025));+#1804 = SURFACE_CURVE('',#1805,(#1809,#1816),.PCURVE_S1.);+#1805 = LINE('',#1806,#1807);+#1806 = CARTESIAN_POINT('',(-2.25,-1.7,1.025));+#1807 = VECTOR('',#1808,1.);+#1808 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#1809 = PCURVE('',#1145,#1810);+#1810 = DEFINITIONAL_REPRESENTATION('',(#1811),#1815);+#1811 = LINE('',#1812,#1813);+#1812 = CARTESIAN_POINT('',(-2.25,4.1125));+#1813 = VECTOR('',#1814,1.);+#1814 = DIRECTION('',(1.,1.226506788433E-16));+#1815 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1816 = PCURVE('',#1817,#1822);+#1817 = PLANE('',#1818);+#1818 = AXIS2_PLACEMENT_3D('',#1819,#1820,#1821);+#1819 = CARTESIAN_POINT('',(-2.42560961319,-1.7,0.548953137803));+#1820 = DIRECTION('',(1.144237745222E-17,1.,0.));+#1821 = DIRECTION('',(0.,-0.,1.));+#1822 = DEFINITIONAL_REPRESENTATION('',(#1823),#1827);+#1823 = LINE('',#1824,#1825);+#1824 = CARTESIAN_POINT('',(0.476046862197,0.17560961319));+#1825 = VECTOR('',#1826,1.);+#1826 = DIRECTION('',(0.,1.));+#1827 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1828 = ORIENTED_EDGE('',*,*,#1829,.T.);+#1829 = EDGE_CURVE('',#1802,#1830,#1832,.T.);+#1830 = VERTEX_POINT('',#1831);+#1831 = CARTESIAN_POINT('',(-1.95,-0.84,1.025));+#1832 = SURFACE_CURVE('',#1833,(#1837,#1844),.PCURVE_S1.);+#1833 = LINE('',#1834,#1835);+#1834 = CARTESIAN_POINT('',(-1.95,-2.275,1.025));+#1835 = VECTOR('',#1836,1.);+#1836 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#1837 = PCURVE('',#1145,#1838);+#1838 = DEFINITIONAL_REPRESENTATION('',(#1839),#1843);+#1839 = LINE('',#1840,#1841);+#1840 = CARTESIAN_POINT('',(-1.95,4.6875));+#1841 = VECTOR('',#1842,1.);+#1842 = DIRECTION('',(1.859989286E-19,-1.));+#1843 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1844 = PCURVE('',#446,#1845);+#1845 = DEFINITIONAL_REPRESENTATION('',(#1846),#1850);+#1846 = LINE('',#1847,#1848);+#1847 = CARTESIAN_POINT('',(0.,0.));+#1848 = VECTOR('',#1849,1.);+#1849 = DIRECTION('',(1.,0.));+#1850 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1851 = ORIENTED_EDGE('',*,*,#1852,.F.);+#1852 = EDGE_CURVE('',#1853,#1830,#1855,.T.);+#1853 = VERTEX_POINT('',#1854);+#1854 = CARTESIAN_POINT('',(-2.25,-0.84,1.025));+#1855 = SURFACE_CURVE('',#1856,(#1860,#1867),.PCURVE_S1.);+#1856 = LINE('',#1857,#1858);+#1857 = CARTESIAN_POINT('',(-2.25,-0.84,1.025));+#1858 = VECTOR('',#1859,1.);+#1859 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#1860 = PCURVE('',#1145,#1861);+#1861 = DEFINITIONAL_REPRESENTATION('',(#1862),#1866);+#1862 = LINE('',#1863,#1864);+#1863 = CARTESIAN_POINT('',(-2.25,3.2525));+#1864 = VECTOR('',#1865,1.);+#1865 = DIRECTION('',(1.,1.226506788433E-16));+#1866 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1867 = PCURVE('',#1868,#1873);+#1868 = PLANE('',#1869);+#1869 = AXIS2_PLACEMENT_3D('',#1870,#1871,#1872);+#1870 = CARTESIAN_POINT('',(-2.42560961319,-0.84,0.548953137803));+#1871 = DIRECTION('',(1.144237745222E-17,1.,0.));+#1872 = DIRECTION('',(0.,-0.,1.));+#1873 = DEFINITIONAL_REPRESENTATION('',(#1874),#1878);+#1874 = LINE('',#1875,#1876);+#1875 = CARTESIAN_POINT('',(0.476046862197,0.17560961319));+#1876 = VECTOR('',#1877,1.);+#1877 = DIRECTION('',(0.,1.));+#1878 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1879 = ORIENTED_EDGE('',*,*,#1880,.T.);+#1880 = EDGE_CURVE('',#1853,#1881,#1883,.T.);+#1881 = VERTEX_POINT('',#1882);+#1882 = CARTESIAN_POINT('',(-2.25,-0.43,1.025));+#1883 = SURFACE_CURVE('',#1884,(#1888,#1895),.PCURVE_S1.);+#1884 = LINE('',#1885,#1886);+#1885 = CARTESIAN_POINT('',(-2.25,-0.84,1.025));+#1886 = VECTOR('',#1887,1.);+#1887 = DIRECTION('',(1.144237745222E-17,1.,0.));+#1888 = PCURVE('',#1145,#1889);+#1889 = DEFINITIONAL_REPRESENTATION('',(#1890),#1894);+#1890 = LINE('',#1891,#1892);+#1891 = CARTESIAN_POINT('',(-2.25,3.2525));+#1892 = VECTOR('',#1893,1.);+#1893 = DIRECTION('',(1.226506788433E-16,-1.));+#1894 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1895 = PCURVE('',#1896,#1901);+#1896 = CYLINDRICAL_SURFACE('',#1897,0.3);+#1897 = AXIS2_PLACEMENT_3D('',#1898,#1899,#1900);+#1898 = CARTESIAN_POINT('',(-2.25,-0.84,0.725));+#1899 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#1900 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667)+ );+#1901 = DEFINITIONAL_REPRESENTATION('',(#1902),#1906);+#1902 = LINE('',#1903,#1904);+#1903 = CARTESIAN_POINT('',(4.886921905584,0.));+#1904 = VECTOR('',#1905,1.);+#1905 = DIRECTION('',(0.,-1.));+#1906 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1907 = ORIENTED_EDGE('',*,*,#1908,.T.);+#1908 = EDGE_CURVE('',#1881,#1909,#1911,.T.);+#1909 = VERTEX_POINT('',#1910);+#1910 = CARTESIAN_POINT('',(-1.95,-0.43,1.025));+#1911 = SURFACE_CURVE('',#1912,(#1916,#1923),.PCURVE_S1.);+#1912 = LINE('',#1913,#1914);+#1913 = CARTESIAN_POINT('',(-2.25,-0.43,1.025));+#1914 = VECTOR('',#1915,1.);+#1915 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#1916 = PCURVE('',#1145,#1917);+#1917 = DEFINITIONAL_REPRESENTATION('',(#1918),#1922);+#1918 = LINE('',#1919,#1920);+#1919 = CARTESIAN_POINT('',(-2.25,2.8425));+#1920 = VECTOR('',#1921,1.);+#1921 = DIRECTION('',(1.,1.226506788433E-16));+#1922 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1923 = PCURVE('',#1924,#1929);+#1924 = PLANE('',#1925);+#1925 = AXIS2_PLACEMENT_3D('',#1926,#1927,#1928);+#1926 = CARTESIAN_POINT('',(-2.42560961319,-0.43,0.548953137803));+#1927 = DIRECTION('',(1.144237745222E-17,1.,0.));+#1928 = DIRECTION('',(0.,-0.,1.));+#1929 = DEFINITIONAL_REPRESENTATION('',(#1930),#1934);+#1930 = LINE('',#1931,#1932);+#1931 = CARTESIAN_POINT('',(0.476046862197,0.17560961319));+#1932 = VECTOR('',#1933,1.);+#1933 = DIRECTION('',(0.,1.));+#1934 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1935 = ORIENTED_EDGE('',*,*,#1936,.T.);+#1936 = EDGE_CURVE('',#1909,#1937,#1939,.T.);+#1937 = VERTEX_POINT('',#1938);+#1938 = CARTESIAN_POINT('',(-1.95,0.43,1.025));+#1939 = SURFACE_CURVE('',#1940,(#1944,#1951),.PCURVE_S1.);+#1940 = LINE('',#1941,#1942);+#1941 = CARTESIAN_POINT('',(-1.95,-2.275,1.025));+#1942 = VECTOR('',#1943,1.);+#1943 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#1944 = PCURVE('',#1145,#1945);+#1945 = DEFINITIONAL_REPRESENTATION('',(#1946),#1950);+#1946 = LINE('',#1947,#1948);+#1947 = CARTESIAN_POINT('',(-1.95,4.6875));+#1948 = VECTOR('',#1949,1.);+#1949 = DIRECTION('',(1.859989286E-19,-1.));+#1950 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1951 = PCURVE('',#390,#1952);+#1952 = DEFINITIONAL_REPRESENTATION('',(#1953),#1957);+#1953 = LINE('',#1954,#1955);+#1954 = CARTESIAN_POINT('',(0.,0.));+#1955 = VECTOR('',#1956,1.);+#1956 = DIRECTION('',(1.,0.));+#1957 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1958 = ORIENTED_EDGE('',*,*,#1959,.F.);+#1959 = EDGE_CURVE('',#1960,#1937,#1962,.T.);+#1960 = VERTEX_POINT('',#1961);+#1961 = CARTESIAN_POINT('',(-2.25,0.43,1.025));+#1962 = SURFACE_CURVE('',#1963,(#1967,#1974),.PCURVE_S1.);+#1963 = LINE('',#1964,#1965);+#1964 = CARTESIAN_POINT('',(-2.25,0.43,1.025));+#1965 = VECTOR('',#1966,1.);+#1966 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#1967 = PCURVE('',#1145,#1968);+#1968 = DEFINITIONAL_REPRESENTATION('',(#1969),#1973);+#1969 = LINE('',#1970,#1971);+#1970 = CARTESIAN_POINT('',(-2.25,1.9825));+#1971 = VECTOR('',#1972,1.);+#1972 = DIRECTION('',(1.,1.226506788433E-16));+#1973 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1974 = PCURVE('',#1975,#1980);+#1975 = PLANE('',#1976);+#1976 = AXIS2_PLACEMENT_3D('',#1977,#1978,#1979);+#1977 = CARTESIAN_POINT('',(-2.42560961319,0.43,0.548953137803));+#1978 = DIRECTION('',(1.144237745222E-17,1.,0.));+#1979 = DIRECTION('',(0.,-0.,1.));+#1980 = DEFINITIONAL_REPRESENTATION('',(#1981),#1985);+#1981 = LINE('',#1982,#1983);+#1982 = CARTESIAN_POINT('',(0.476046862197,0.17560961319));+#1983 = VECTOR('',#1984,1.);+#1984 = DIRECTION('',(0.,1.));+#1985 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1986 = ORIENTED_EDGE('',*,*,#1987,.T.);+#1987 = EDGE_CURVE('',#1960,#1988,#1990,.T.);+#1988 = VERTEX_POINT('',#1989);+#1989 = CARTESIAN_POINT('',(-2.25,0.84,1.025));+#1990 = SURFACE_CURVE('',#1991,(#1995,#2002),.PCURVE_S1.);+#1991 = LINE('',#1992,#1993);+#1992 = CARTESIAN_POINT('',(-2.25,0.43,1.025));+#1993 = VECTOR('',#1994,1.);+#1994 = DIRECTION('',(1.144237745222E-17,1.,0.));+#1995 = PCURVE('',#1145,#1996);+#1996 = DEFINITIONAL_REPRESENTATION('',(#1997),#2001);+#1997 = LINE('',#1998,#1999);+#1998 = CARTESIAN_POINT('',(-2.25,1.9825));+#1999 = VECTOR('',#2000,1.);+#2000 = DIRECTION('',(1.226506788433E-16,-1.));+#2001 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2002 = PCURVE('',#2003,#2008);+#2003 = CYLINDRICAL_SURFACE('',#2004,0.3);+#2004 = AXIS2_PLACEMENT_3D('',#2005,#2006,#2007);+#2005 = CARTESIAN_POINT('',(-2.25,0.43,0.725));+#2006 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#2007 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667)+ );+#2008 = DEFINITIONAL_REPRESENTATION('',(#2009),#2013);+#2009 = LINE('',#2010,#2011);+#2010 = CARTESIAN_POINT('',(4.886921905584,0.));+#2011 = VECTOR('',#2012,1.);+#2012 = DIRECTION('',(0.,-1.));+#2013 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2014 = ORIENTED_EDGE('',*,*,#2015,.T.);+#2015 = EDGE_CURVE('',#1988,#2016,#2018,.T.);+#2016 = VERTEX_POINT('',#2017);+#2017 = CARTESIAN_POINT('',(-1.95,0.84,1.025));+#2018 = SURFACE_CURVE('',#2019,(#2023,#2030),.PCURVE_S1.);+#2019 = LINE('',#2020,#2021);+#2020 = CARTESIAN_POINT('',(-2.25,0.84,1.025));+#2021 = VECTOR('',#2022,1.);+#2022 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#2023 = PCURVE('',#1145,#2024);+#2024 = DEFINITIONAL_REPRESENTATION('',(#2025),#2029);+#2025 = LINE('',#2026,#2027);+#2026 = CARTESIAN_POINT('',(-2.25,1.5725));+#2027 = VECTOR('',#2028,1.);+#2028 = DIRECTION('',(1.,1.226506788433E-16));+#2029 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2030 = PCURVE('',#2031,#2036);+#2031 = PLANE('',#2032);+#2032 = AXIS2_PLACEMENT_3D('',#2033,#2034,#2035);+#2033 = CARTESIAN_POINT('',(-2.42560961319,0.84,0.548953137803));+#2034 = DIRECTION('',(1.144237745222E-17,1.,0.));+#2035 = DIRECTION('',(0.,-0.,1.));+#2036 = DEFINITIONAL_REPRESENTATION('',(#2037),#2041);+#2037 = LINE('',#2038,#2039);+#2038 = CARTESIAN_POINT('',(0.476046862197,0.17560961319));+#2039 = VECTOR('',#2040,1.);+#2040 = DIRECTION('',(0.,1.));+#2041 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2042 = ORIENTED_EDGE('',*,*,#2043,.T.);+#2043 = EDGE_CURVE('',#2016,#2044,#2046,.T.);+#2044 = VERTEX_POINT('',#2045);+#2045 = CARTESIAN_POINT('',(-1.95,1.7,1.025));+#2046 = SURFACE_CURVE('',#2047,(#2051,#2058),.PCURVE_S1.);+#2047 = LINE('',#2048,#2049);+#2048 = CARTESIAN_POINT('',(-1.95,-2.275,1.025));+#2049 = VECTOR('',#2050,1.);+#2050 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#2051 = PCURVE('',#1145,#2052);+#2052 = DEFINITIONAL_REPRESENTATION('',(#2053),#2057);+#2053 = LINE('',#2054,#2055);+#2054 = CARTESIAN_POINT('',(-1.95,4.6875));+#2055 = VECTOR('',#2056,1.);+#2056 = DIRECTION('',(1.859989286E-19,-1.));+#2057 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2058 = PCURVE('',#334,#2059);+#2059 = DEFINITIONAL_REPRESENTATION('',(#2060),#2064);+#2060 = LINE('',#2061,#2062);+#2061 = CARTESIAN_POINT('',(0.,0.));+#2062 = VECTOR('',#2063,1.);+#2063 = DIRECTION('',(1.,0.));+#2064 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2065 = ORIENTED_EDGE('',*,*,#2066,.F.);+#2066 = EDGE_CURVE('',#2067,#2044,#2069,.T.);+#2067 = VERTEX_POINT('',#2068);+#2068 = CARTESIAN_POINT('',(-2.25,1.7,1.025));+#2069 = SURFACE_CURVE('',#2070,(#2074,#2081),.PCURVE_S1.);+#2070 = LINE('',#2071,#2072);+#2071 = CARTESIAN_POINT('',(-2.25,1.7,1.025));+#2072 = VECTOR('',#2073,1.);+#2073 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#2074 = PCURVE('',#1145,#2075);+#2075 = DEFINITIONAL_REPRESENTATION('',(#2076),#2080);+#2076 = LINE('',#2077,#2078);+#2077 = CARTESIAN_POINT('',(-2.25,0.7125));+#2078 = VECTOR('',#2079,1.);+#2079 = DIRECTION('',(1.,1.226506788433E-16));+#2080 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2081 = PCURVE('',#2082,#2087);+#2082 = PLANE('',#2083);+#2083 = AXIS2_PLACEMENT_3D('',#2084,#2085,#2086);+#2084 = CARTESIAN_POINT('',(-2.42560961319,1.7,0.548953137803));+#2085 = DIRECTION('',(1.144237745222E-17,1.,0.));+#2086 = DIRECTION('',(0.,-0.,1.));+#2087 = DEFINITIONAL_REPRESENTATION('',(#2088),#2092);+#2088 = LINE('',#2089,#2090);+#2089 = CARTESIAN_POINT('',(0.476046862197,0.17560961319));+#2090 = VECTOR('',#2091,1.);+#2091 = DIRECTION('',(0.,1.));+#2092 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2093 = ORIENTED_EDGE('',*,*,#2094,.T.);+#2094 = EDGE_CURVE('',#2067,#2095,#2097,.T.);+#2095 = VERTEX_POINT('',#2096);+#2096 = CARTESIAN_POINT('',(-2.25,2.11,1.025));+#2097 = SURFACE_CURVE('',#2098,(#2102,#2109),.PCURVE_S1.);+#2098 = LINE('',#2099,#2100);+#2099 = CARTESIAN_POINT('',(-2.25,1.7,1.025));+#2100 = VECTOR('',#2101,1.);+#2101 = DIRECTION('',(1.144237745222E-17,1.,0.));+#2102 = PCURVE('',#1145,#2103);+#2103 = DEFINITIONAL_REPRESENTATION('',(#2104),#2108);+#2104 = LINE('',#2105,#2106);+#2105 = CARTESIAN_POINT('',(-2.25,0.7125));+#2106 = VECTOR('',#2107,1.);+#2107 = DIRECTION('',(1.226506788433E-16,-1.));+#2108 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2109 = PCURVE('',#2110,#2115);+#2110 = CYLINDRICAL_SURFACE('',#2111,0.3);+#2111 = AXIS2_PLACEMENT_3D('',#2112,#2113,#2114);+#2112 = CARTESIAN_POINT('',(-2.25,1.7,0.725));+#2113 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#2114 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667)+ );+#2115 = DEFINITIONAL_REPRESENTATION('',(#2116),#2120);+#2116 = LINE('',#2117,#2118);+#2117 = CARTESIAN_POINT('',(4.886921905584,0.));+#2118 = VECTOR('',#2119,1.);+#2119 = DIRECTION('',(0.,-1.));+#2120 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2121 = ORIENTED_EDGE('',*,*,#2122,.T.);+#2122 = EDGE_CURVE('',#2095,#2123,#2125,.T.);+#2123 = VERTEX_POINT('',#2124);+#2124 = CARTESIAN_POINT('',(-1.95,2.11,1.025));+#2125 = SURFACE_CURVE('',#2126,(#2130,#2137),.PCURVE_S1.);+#2126 = LINE('',#2127,#2128);+#2127 = CARTESIAN_POINT('',(-2.25,2.11,1.025));+#2128 = VECTOR('',#2129,1.);+#2129 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#2130 = PCURVE('',#1145,#2131);+#2131 = DEFINITIONAL_REPRESENTATION('',(#2132),#2136);+#2132 = LINE('',#2133,#2134);+#2133 = CARTESIAN_POINT('',(-2.25,0.3025));+#2134 = VECTOR('',#2135,1.);+#2135 = DIRECTION('',(1.,1.226506788433E-16));+#2136 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2137 = PCURVE('',#2138,#2143);+#2138 = PLANE('',#2139);+#2139 = AXIS2_PLACEMENT_3D('',#2140,#2141,#2142);+#2140 = CARTESIAN_POINT('',(-2.42560961319,2.11,0.548953137803));+#2141 = DIRECTION('',(1.144237745222E-17,1.,0.));+#2142 = DIRECTION('',(0.,-0.,1.));+#2143 = DEFINITIONAL_REPRESENTATION('',(#2144),#2148);+#2144 = LINE('',#2145,#2146);+#2145 = CARTESIAN_POINT('',(0.476046862197,0.17560961319));+#2146 = VECTOR('',#2147,1.);+#2147 = DIRECTION('',(0.,1.));+#2148 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2149 = ORIENTED_EDGE('',*,*,#2150,.T.);+#2150 = EDGE_CURVE('',#2123,#1161,#2151,.T.);+#2151 = SURFACE_CURVE('',#2152,(#2156,#2163),.PCURVE_S1.);+#2152 = LINE('',#2153,#2154);+#2153 = CARTESIAN_POINT('',(-1.95,-2.275,1.025));+#2154 = VECTOR('',#2155,1.);+#2155 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#2156 = PCURVE('',#1145,#2157);+#2157 = DEFINITIONAL_REPRESENTATION('',(#2158),#2162);+#2158 = LINE('',#2159,#2160);+#2159 = CARTESIAN_POINT('',(-1.95,4.6875));+#2160 = VECTOR('',#2161,1.);+#2161 = DIRECTION('',(1.859989286E-19,-1.));+#2162 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2163 = PCURVE('',#278,#2164);+#2164 = DEFINITIONAL_REPRESENTATION('',(#2165),#2169);+#2165 = LINE('',#2166,#2167);+#2166 = CARTESIAN_POINT('',(0.,0.));+#2167 = VECTOR('',#2168,1.);+#2168 = DIRECTION('',(1.,0.));+#2169 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2170 = FACE_BOUND('',#2171,.F.);+#2171 = EDGE_LOOP('',(#2172,#2202,#2230,#2258,#2286,#2314,#2342,#2370));+#2172 = ORIENTED_EDGE('',*,*,#2173,.F.);+#2173 = EDGE_CURVE('',#2174,#2176,#2178,.T.);+#2174 = VERTEX_POINT('',#2175);+#2175 = CARTESIAN_POINT('',(1.875,2.2375,1.025));+#2176 = VERTEX_POINT('',#2177);+#2177 = CARTESIAN_POINT('',(1.875,-2.2375,1.025));+#2178 = SURFACE_CURVE('',#2179,(#2183,#2190),.PCURVE_S1.);+#2179 = LINE('',#2180,#2181);+#2180 = CARTESIAN_POINT('',(1.875,2.2375,1.025));+#2181 = VECTOR('',#2182,1.);+#2182 = DIRECTION('',(0.,-1.,0.));+#2183 = PCURVE('',#1145,#2184);+#2184 = DEFINITIONAL_REPRESENTATION('',(#2185),#2189);+#2185 = LINE('',#2186,#2187);+#2186 = CARTESIAN_POINT('',(1.875,0.175));+#2187 = VECTOR('',#2188,1.);+#2188 = DIRECTION('',(-1.112083013911E-16,1.));+#2189 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2190 = PCURVE('',#2191,#2196);+#2191 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#2192,#2193)+ ,(#2194,#2195+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,4.475),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#2192 = CARTESIAN_POINT('',(1.875,2.2375,1.025));+#2193 = CARTESIAN_POINT('',(1.760171280765,2.180085640382,1.75));+#2194 = CARTESIAN_POINT('',(1.875,-2.2375,1.025));+#2195 = CARTESIAN_POINT('',(1.760171280765,-2.180085640382,1.75));+#2196 = DEFINITIONAL_REPRESENTATION('',(#2197),#2201);+#2197 = LINE('',#2198,#2199);+#2198 = CARTESIAN_POINT('',(-3.069575063905E-17,1.607055245639E-16));+#2199 = VECTOR('',#2200,1.);+#2200 = DIRECTION('',(1.,-8.164441876029E-16));+#2201 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2202 = ORIENTED_EDGE('',*,*,#2203,.F.);+#2203 = EDGE_CURVE('',#2204,#2174,#2206,.T.);+#2204 = VERTEX_POINT('',#2205);+#2205 = CARTESIAN_POINT('',(1.7375,2.375,1.025));+#2206 = SURFACE_CURVE('',#2207,(#2211,#2218),.PCURVE_S1.);+#2207 = LINE('',#2208,#2209);+#2208 = CARTESIAN_POINT('',(1.7375,2.375,1.025));+#2209 = VECTOR('',#2210,1.);+#2210 = DIRECTION('',(0.707106781187,-0.707106781187,0.));+#2211 = PCURVE('',#1145,#2212);+#2212 = DEFINITIONAL_REPRESENTATION('',(#2213),#2217);+#2213 = LINE('',#2214,#2215);+#2214 = CARTESIAN_POINT('',(1.7375,3.75E-02));+#2215 = VECTOR('',#2216,1.);+#2216 = DIRECTION('',(0.707106781187,0.707106781187));+#2217 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2218 = PCURVE('',#2219,#2224);+#2219 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#2220,#2221)+ ,(#2222,#2223+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.194454364826),(0.,1.)+ ,.PIECEWISE_BEZIER_KNOTS.);+#2220 = CARTESIAN_POINT('',(1.7375,2.375,1.025));+#2221 = CARTESIAN_POINT('',(1.680085640382,2.260171280765,1.75));+#2222 = CARTESIAN_POINT('',(1.875,2.2375,1.025));+#2223 = CARTESIAN_POINT('',(1.760171280765,2.180085640382,1.75));+#2224 = DEFINITIONAL_REPRESENTATION('',(#2225),#2229);+#2225 = LINE('',#2226,#2227);+#2226 = CARTESIAN_POINT('',(2.738217532698E-16,4.809419873548E-17));+#2227 = VECTOR('',#2228,1.);+#2228 = DIRECTION('',(1.,-5.460298955199E-16));+#2229 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2230 = ORIENTED_EDGE('',*,*,#2231,.F.);+#2231 = EDGE_CURVE('',#2232,#2204,#2234,.T.);+#2232 = VERTEX_POINT('',#2233);+#2233 = CARTESIAN_POINT('',(-1.7375,2.375,1.025));+#2234 = SURFACE_CURVE('',#2235,(#2239,#2246),.PCURVE_S1.);+#2235 = LINE('',#2236,#2237);+#2236 = CARTESIAN_POINT('',(-1.7375,2.375,1.025));+#2237 = VECTOR('',#2238,1.);+#2238 = DIRECTION('',(1.,1.110223024625E-16,0.));+#2239 = PCURVE('',#1145,#2240);+#2240 = DEFINITIONAL_REPRESENTATION('',(#2241),#2245);+#2241 = LINE('',#2242,#2243);+#2242 = CARTESIAN_POINT('',(-1.7375,3.75E-02));+#2243 = VECTOR('',#2244,1.);+#2244 = DIRECTION('',(1.,1.859989286E-19));+#2245 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2246 = PCURVE('',#2247,#2252);+#2247 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#2248,#2249)+ ,(#2250,#2251+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,3.475),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#2248 = CARTESIAN_POINT('',(-1.7375,2.375,1.025));+#2249 = CARTESIAN_POINT('',(-1.680085640382,2.260171280765,1.75));+#2250 = CARTESIAN_POINT('',(1.7375,2.375,1.025));+#2251 = CARTESIAN_POINT('',(1.680085640382,2.260171280765,1.75));+#2252 = DEFINITIONAL_REPRESENTATION('',(#2253),#2257);+#2253 = LINE('',#2254,#2255);+#2254 = CARTESIAN_POINT('',(-4.2621274328E-17,2.564255928447E-17));+#2255 = VECTOR('',#2256,1.);+#2256 = DIRECTION('',(1.,-5.447280452419E-17));+#2257 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2258 = ORIENTED_EDGE('',*,*,#2259,.F.);+#2259 = EDGE_CURVE('',#2260,#2232,#2262,.T.);+#2260 = VERTEX_POINT('',#2261);+#2261 = CARTESIAN_POINT('',(-1.875,2.2375,1.025));+#2262 = SURFACE_CURVE('',#2263,(#2267,#2274),.PCURVE_S1.);+#2263 = LINE('',#2264,#2265);+#2264 = CARTESIAN_POINT('',(-1.875,2.2375,1.025));+#2265 = VECTOR('',#2266,1.);+#2266 = DIRECTION('',(0.707106781187,0.707106781187,0.));+#2267 = PCURVE('',#1145,#2268);+#2268 = DEFINITIONAL_REPRESENTATION('',(#2269),#2273);+#2269 = LINE('',#2270,#2271);+#2270 = CARTESIAN_POINT('',(-1.875,0.175));+#2271 = VECTOR('',#2272,1.);+#2272 = DIRECTION('',(0.707106781187,-0.707106781187));+#2273 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2274 = PCURVE('',#2275,#2280);+#2275 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#2276,#2277)+ ,(#2278,#2279+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.194454364826),(0.,1.)+ ,.PIECEWISE_BEZIER_KNOTS.);+#2276 = CARTESIAN_POINT('',(-1.875,2.2375,1.025));+#2277 = CARTESIAN_POINT('',(-1.760171280765,2.180085640382,1.75));+#2278 = CARTESIAN_POINT('',(-1.7375,2.375,1.025));+#2279 = CARTESIAN_POINT('',(-1.680085640382,2.260171280765,1.75));+#2280 = DEFINITIONAL_REPRESENTATION('',(#2281),#2285);+#2281 = LINE('',#2282,#2283);+#2282 = CARTESIAN_POINT('',(-1.958481907314E-16,1.270855007249E-17));+#2283 = VECTOR('',#2284,1.);+#2284 = DIRECTION('',(1.,3.638625729945E-16));+#2285 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2286 = ORIENTED_EDGE('',*,*,#2287,.F.);+#2287 = EDGE_CURVE('',#2288,#2260,#2290,.T.);+#2288 = VERTEX_POINT('',#2289);+#2289 = CARTESIAN_POINT('',(-1.875,-2.2375,1.025));+#2290 = SURFACE_CURVE('',#2291,(#2295,#2302),.PCURVE_S1.);+#2291 = LINE('',#2292,#2293);+#2292 = CARTESIAN_POINT('',(-1.875,-2.2375,1.025));+#2293 = VECTOR('',#2294,1.);+#2294 = DIRECTION('',(0.,1.,0.));+#2295 = PCURVE('',#1145,#2296);+#2296 = DEFINITIONAL_REPRESENTATION('',(#2297),#2301);+#2297 = LINE('',#2298,#2299);+#2298 = CARTESIAN_POINT('',(-1.875,4.65));+#2299 = VECTOR('',#2300,1.);+#2300 = DIRECTION('',(1.112083013911E-16,-1.));+#2301 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2302 = PCURVE('',#2303,#2308);+#2303 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#2304,#2305)+ ,(#2306,#2307+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,4.475),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#2304 = CARTESIAN_POINT('',(-1.875,-2.2375,1.025));+#2305 = CARTESIAN_POINT('',(-1.760171280765,-2.180085640382,1.75));+#2306 = CARTESIAN_POINT('',(-1.875,2.2375,1.025));+#2307 = CARTESIAN_POINT('',(-1.760171280765,2.180085640382,1.75));+#2308 = DEFINITIONAL_REPRESENTATION('',(#2309),#2313);+#2309 = LINE('',#2310,#2311);+#2310 = CARTESIAN_POINT('',(-3.069575063905E-17,1.607055245639E-16));+#2311 = VECTOR('',#2312,1.);+#2312 = DIRECTION('',(1.,-8.164441876029E-16));+#2313 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2314 = ORIENTED_EDGE('',*,*,#2315,.F.);+#2315 = EDGE_CURVE('',#2316,#2288,#2318,.T.);+#2316 = VERTEX_POINT('',#2317);+#2317 = CARTESIAN_POINT('',(-1.7375,-2.375,1.025));+#2318 = SURFACE_CURVE('',#2319,(#2323,#2330),.PCURVE_S1.);+#2319 = LINE('',#2320,#2321);+#2320 = CARTESIAN_POINT('',(-1.7375,-2.375,1.025));+#2321 = VECTOR('',#2322,1.);+#2322 = DIRECTION('',(-0.707106781187,0.707106781187,0.));+#2323 = PCURVE('',#1145,#2324);+#2324 = DEFINITIONAL_REPRESENTATION('',(#2325),#2329);+#2325 = LINE('',#2326,#2327);+#2326 = CARTESIAN_POINT('',(-1.7375,4.7875));+#2327 = VECTOR('',#2328,1.);+#2328 = DIRECTION('',(-0.707106781187,-0.707106781187));+#2329 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2330 = PCURVE('',#2331,#2336);+#2331 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#2332,#2333)+ ,(#2334,#2335+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.194454364826),(0.,1.)+ ,.PIECEWISE_BEZIER_KNOTS.);+#2332 = CARTESIAN_POINT('',(-1.7375,-2.375,1.025));+#2333 = CARTESIAN_POINT('',(-1.680085640382,-2.260171280765,1.75));+#2334 = CARTESIAN_POINT('',(-1.875,-2.2375,1.025));+#2335 = CARTESIAN_POINT('',(-1.760171280765,-2.180085640382,1.75));+#2336 = DEFINITIONAL_REPRESENTATION('',(#2337),#2341);+#2337 = LINE('',#2338,#2339);+#2338 = CARTESIAN_POINT('',(2.738217532698E-16,4.809419873548E-17));+#2339 = VECTOR('',#2340,1.);+#2340 = DIRECTION('',(1.,-5.460298955199E-16));+#2341 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2342 = ORIENTED_EDGE('',*,*,#2343,.F.);+#2343 = EDGE_CURVE('',#2344,#2316,#2346,.T.);+#2344 = VERTEX_POINT('',#2345);+#2345 = CARTESIAN_POINT('',(1.7375,-2.375,1.025));+#2346 = SURFACE_CURVE('',#2347,(#2351,#2358),.PCURVE_S1.);+#2347 = LINE('',#2348,#2349);+#2348 = CARTESIAN_POINT('',(1.7375,-2.375,1.025));+#2349 = VECTOR('',#2350,1.);+#2350 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#2351 = PCURVE('',#1145,#2352);+#2352 = DEFINITIONAL_REPRESENTATION('',(#2353),#2357);+#2353 = LINE('',#2354,#2355);+#2354 = CARTESIAN_POINT('',(1.7375,4.7875));+#2355 = VECTOR('',#2356,1.);+#2356 = DIRECTION('',(-1.,-1.859989286E-19));+#2357 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2358 = PCURVE('',#2359,#2364);+#2359 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#2360,#2361)+ ,(#2362,#2363+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,3.475),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#2360 = CARTESIAN_POINT('',(1.7375,-2.375,1.025));+#2361 = CARTESIAN_POINT('',(1.680085640382,-2.260171280765,1.75));+#2362 = CARTESIAN_POINT('',(-1.7375,-2.375,1.025));+#2363 = CARTESIAN_POINT('',(-1.680085640382,-2.260171280765,1.75));+#2364 = DEFINITIONAL_REPRESENTATION('',(#2365),#2369);+#2365 = LINE('',#2366,#2367);+#2366 = CARTESIAN_POINT('',(-4.2621274328E-17,2.564255928447E-17));+#2367 = VECTOR('',#2368,1.);+#2368 = DIRECTION('',(1.,-5.447280452419E-17));+#2369 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2370 = ORIENTED_EDGE('',*,*,#2371,.F.);+#2371 = EDGE_CURVE('',#2176,#2344,#2372,.T.);+#2372 = SURFACE_CURVE('',#2373,(#2377,#2384),.PCURVE_S1.);+#2373 = LINE('',#2374,#2375);+#2374 = CARTESIAN_POINT('',(1.875,-2.2375,1.025));+#2375 = VECTOR('',#2376,1.);+#2376 = DIRECTION('',(-0.707106781187,-0.707106781187,0.));+#2377 = PCURVE('',#1145,#2378);+#2378 = DEFINITIONAL_REPRESENTATION('',(#2379),#2383);+#2379 = LINE('',#2380,#2381);+#2380 = CARTESIAN_POINT('',(1.875,4.65));+#2381 = VECTOR('',#2382,1.);+#2382 = DIRECTION('',(-0.707106781187,0.707106781187));+#2383 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2384 = PCURVE('',#2385,#2390);+#2385 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#2386,#2387)+ ,(#2388,#2389+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.194454364826),(0.,1.)+ ,.PIECEWISE_BEZIER_KNOTS.);+#2386 = CARTESIAN_POINT('',(1.875,-2.2375,1.025));+#2387 = CARTESIAN_POINT('',(1.760171280765,-2.180085640382,1.75));+#2388 = CARTESIAN_POINT('',(1.7375,-2.375,1.025));+#2389 = CARTESIAN_POINT('',(1.680085640382,-2.260171280765,1.75));+#2390 = DEFINITIONAL_REPRESENTATION('',(#2391),#2395);+#2391 = LINE('',#2392,#2393);+#2392 = CARTESIAN_POINT('',(-1.958481907314E-16,1.270855007249E-17));+#2393 = VECTOR('',#2394,1.);+#2394 = DIRECTION('',(1.,3.638625729945E-16));+#2395 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2396 = ADVANCED_FACE('',(#2397),#2385,.F.);+#2397 = FACE_BOUND('',#2398,.F.);+#2398 = EDGE_LOOP('',(#2399,#2400,#2422,#2449));+#2399 = ORIENTED_EDGE('',*,*,#2371,.T.);+#2400 = ORIENTED_EDGE('',*,*,#2401,.T.);+#2401 = EDGE_CURVE('',#2344,#2402,#2404,.T.);+#2402 = VERTEX_POINT('',#2403);+#2403 = CARTESIAN_POINT('',(1.680085640382,-2.260171280765,1.75));+#2404 = SURFACE_CURVE('',#2405,(#2408,#2415),.PCURVE_S1.);+#2405 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2406,#2407),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2406 = CARTESIAN_POINT('',(1.7375,-2.375,1.025));+#2407 = CARTESIAN_POINT('',(1.680085640382,-2.260171280765,1.75));+#2408 = PCURVE('',#2385,#2409);+#2409 = DEFINITIONAL_REPRESENTATION('',(#2410),#2414);+#2410 = LINE('',#2411,#2412);+#2411 = CARTESIAN_POINT('',(0.194454364826,8.346321558809E-17));+#2412 = VECTOR('',#2413,1.);+#2413 = DIRECTION('',(-8.326672684689E-17,1.));+#2414 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2415 = PCURVE('',#2359,#2416);+#2416 = DEFINITIONAL_REPRESENTATION('',(#2417),#2421);+#2417 = LINE('',#2418,#2419);+#2418 = CARTESIAN_POINT('',(-4.2621274328E-17,2.564255928447E-17));+#2419 = VECTOR('',#2420,1.);+#2420 = DIRECTION('',(2.060577736657E-16,1.));+#2421 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2422 = ORIENTED_EDGE('',*,*,#2423,.F.);+#2423 = EDGE_CURVE('',#2424,#2402,#2426,.T.);+#2424 = VERTEX_POINT('',#2425);+#2425 = CARTESIAN_POINT('',(1.760171280765,-2.180085640382,1.75));+#2426 = SURFACE_CURVE('',#2427,(#2431,#2437),.PCURVE_S1.);+#2427 = LINE('',#2428,#2429);+#2428 = CARTESIAN_POINT('',(1.760171280765,-2.180085640382,1.75));+#2429 = VECTOR('',#2430,1.);+#2430 = DIRECTION('',(-0.707106781187,-0.707106781187,0.));+#2431 = PCURVE('',#2385,#2432);+#2432 = DEFINITIONAL_REPRESENTATION('',(#2433),#2436);+#2433 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2434,#2435),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,0.113258198781),.PIECEWISE_BEZIER_KNOTS.);+#2434 = CARTESIAN_POINT('',(-6.960457594574E-17,1.));+#2435 = CARTESIAN_POINT('',(0.194454364826,1.));+#2436 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2437 = PCURVE('',#2438,#2443);+#2438 = PLANE('',#2439);+#2439 = AXIS2_PLACEMENT_3D('',#2440,#2441,#2442);+#2440 = CARTESIAN_POINT('',(-1.680085640382,2.260171280765,1.75));+#2441 = DIRECTION('',(0.,0.,-1.));+#2442 = DIRECTION('',(0.596575959062,-0.802556617983,0.));+#2443 = DEFINITIONAL_REPRESENTATION('',(#2444),#2448);+#2444 = LINE('',#2445,#2446);+#2445 = CARTESIAN_POINT('',(5.615932149767,-0.112050428413));+#2446 = VECTOR('',#2447,1.);+#2447 = DIRECTION('',(0.145650320716,0.989336133008));+#2448 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2449 = ORIENTED_EDGE('',*,*,#2450,.F.);+#2450 = EDGE_CURVE('',#2176,#2424,#2451,.T.);+#2451 = SURFACE_CURVE('',#2452,(#2455,#2462),.PCURVE_S1.);+#2452 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2453,#2454),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2453 = CARTESIAN_POINT('',(1.875,-2.2375,1.025));+#2454 = CARTESIAN_POINT('',(1.760171280765,-2.180085640382,1.75));+#2455 = PCURVE('',#2385,#2456);+#2456 = DEFINITIONAL_REPRESENTATION('',(#2457),#2461);+#2457 = LINE('',#2458,#2459);+#2458 = CARTESIAN_POINT('',(-1.958481907314E-16,1.270855007249E-17));+#2459 = VECTOR('',#2460,1.);+#2460 = DIRECTION('',(3.933483957273E-16,1.));+#2461 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2462 = PCURVE('',#2191,#2463);+#2463 = DEFINITIONAL_REPRESENTATION('',(#2464),#2468);+#2464 = LINE('',#2465,#2466);+#2465 = CARTESIAN_POINT('',(4.475,-2.841128830464E-17));+#2466 = VECTOR('',#2467,1.);+#2467 = DIRECTION('',(0.,1.));+#2468 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2469 = ADVANCED_FACE('',(#2470,#2625,#3023,#3673,#3864,#4163,#4939,+ #5130,#5402),#2438,.F.);+#2470 = FACE_BOUND('',#2471,.F.);+#2471 = EDGE_LOOP('',(#2472,#2496,#2518,#2538,#2539,#2561,#2583,#2605));+#2472 = ORIENTED_EDGE('',*,*,#2473,.T.);+#2473 = EDGE_CURVE('',#2474,#2476,#2478,.T.);+#2474 = VERTEX_POINT('',#2475);+#2475 = CARTESIAN_POINT('',(-1.680085640382,2.260171280765,1.75));+#2476 = VERTEX_POINT('',#2477);+#2477 = CARTESIAN_POINT('',(1.680085640382,2.260171280765,1.75));+#2478 = SURFACE_CURVE('',#2479,(#2483,#2490),.PCURVE_S1.);+#2479 = LINE('',#2480,#2481);+#2480 = CARTESIAN_POINT('',(-1.680085640382,2.260171280765,1.75));+#2481 = VECTOR('',#2482,1.);+#2482 = DIRECTION('',(1.,1.110223024625E-16,0.));+#2483 = PCURVE('',#2438,#2484);+#2484 = DEFINITIONAL_REPRESENTATION('',(#2485),#2489);+#2485 = LINE('',#2486,#2487);+#2486 = CARTESIAN_POINT('',(0.,-0.));+#2487 = VECTOR('',#2488,1.);+#2488 = DIRECTION('',(0.596575959062,-0.802556617983));+#2489 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2490 = PCURVE('',#2247,#2491);+#2491 = DEFINITIONAL_REPRESENTATION('',(#2492),#2495);+#2492 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2493,#2494),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,3.360171280764),.PIECEWISE_BEZIER_KNOTS.);+#2493 = CARTESIAN_POINT('',(1.690560100251E-16,1.));+#2494 = CARTESIAN_POINT('',(3.475,1.));+#2495 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2496 = ORIENTED_EDGE('',*,*,#2497,.T.);+#2497 = EDGE_CURVE('',#2476,#2498,#2500,.T.);+#2498 = VERTEX_POINT('',#2499);+#2499 = CARTESIAN_POINT('',(1.760171280765,2.180085640382,1.75));+#2500 = SURFACE_CURVE('',#2501,(#2505,#2512),.PCURVE_S1.);+#2501 = LINE('',#2502,#2503);+#2502 = CARTESIAN_POINT('',(1.680085640382,2.260171280765,1.75));+#2503 = VECTOR('',#2504,1.);+#2504 = DIRECTION('',(0.707106781187,-0.707106781187,0.));+#2505 = PCURVE('',#2438,#2506);+#2506 = DEFINITIONAL_REPRESENTATION('',(#2507),#2511);+#2507 = LINE('',#2508,#2509);+#2508 = CARTESIAN_POINT('',(2.004597404435,-2.696727698935));+#2509 = VECTOR('',#2510,1.);+#2510 = DIRECTION('',(0.989336133008,-0.145650320716));+#2511 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2512 = PCURVE('',#2219,#2513);+#2513 = DEFINITIONAL_REPRESENTATION('',(#2514),#2517);+#2514 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2515,#2516),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,0.113258198781),.PIECEWISE_BEZIER_KNOTS.);+#2515 = CARTESIAN_POINT('',(4.744280477712E-16,1.));+#2516 = CARTESIAN_POINT('',(0.194454364826,1.));+#2517 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2518 = ORIENTED_EDGE('',*,*,#2519,.T.);+#2519 = EDGE_CURVE('',#2498,#2424,#2520,.T.);+#2520 = SURFACE_CURVE('',#2521,(#2525,#2532),.PCURVE_S1.);+#2521 = LINE('',#2522,#2523);+#2522 = CARTESIAN_POINT('',(1.760171280765,2.180085640382,1.75));+#2523 = VECTOR('',#2524,1.);+#2524 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2525 = PCURVE('',#2438,#2526);+#2526 = DEFINITIONAL_REPRESENTATION('',(#2527),#2531);+#2527 = LINE('',#2528,#2529);+#2528 = CARTESIAN_POINT('',(2.116647832849,-2.713223791911));+#2529 = VECTOR('',#2530,1.);+#2530 = DIRECTION('',(0.802556617983,0.596575959062));+#2531 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2532 = PCURVE('',#2191,#2533);+#2533 = DEFINITIONAL_REPRESENTATION('',(#2534),#2537);+#2534 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2535,#2536),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,4.360171280764),.PIECEWISE_BEZIER_KNOTS.);+#2535 = CARTESIAN_POINT('',(-6.678561801727E-17,1.));+#2536 = CARTESIAN_POINT('',(4.475,1.));+#2537 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2538 = ORIENTED_EDGE('',*,*,#2423,.T.);+#2539 = ORIENTED_EDGE('',*,*,#2540,.T.);+#2540 = EDGE_CURVE('',#2402,#2541,#2543,.T.);+#2541 = VERTEX_POINT('',#2542);+#2542 = CARTESIAN_POINT('',(-1.680085640382,-2.260171280765,1.75));+#2543 = SURFACE_CURVE('',#2544,(#2548,#2555),.PCURVE_S1.);+#2544 = LINE('',#2545,#2546);+#2545 = CARTESIAN_POINT('',(1.680085640382,-2.260171280765,1.75));+#2546 = VECTOR('',#2547,1.);+#2547 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#2548 = PCURVE('',#2438,#2549);+#2549 = DEFINITIONAL_REPRESENTATION('',(#2550),#2554);+#2550 = LINE('',#2551,#2552);+#2551 = CARTESIAN_POINT('',(5.632428242743,-2.39808173319E-14));+#2552 = VECTOR('',#2553,1.);+#2553 = DIRECTION('',(-0.596575959062,0.802556617983));+#2554 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2555 = PCURVE('',#2359,#2556);+#2556 = DEFINITIONAL_REPRESENTATION('',(#2557),#2560);+#2557 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2558,#2559),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,3.360171280764),.PIECEWISE_BEZIER_KNOTS.);+#2558 = CARTESIAN_POINT('',(1.690560100251E-16,1.));+#2559 = CARTESIAN_POINT('',(3.475,1.));+#2560 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2561 = ORIENTED_EDGE('',*,*,#2562,.T.);+#2562 = EDGE_CURVE('',#2541,#2563,#2565,.T.);+#2563 = VERTEX_POINT('',#2564);+#2564 = CARTESIAN_POINT('',(-1.760171280765,-2.180085640382,1.75));+#2565 = SURFACE_CURVE('',#2566,(#2570,#2577),.PCURVE_S1.);+#2566 = LINE('',#2567,#2568);+#2567 = CARTESIAN_POINT('',(-1.680085640382,-2.260171280765,1.75));+#2568 = VECTOR('',#2569,1.);+#2569 = DIRECTION('',(-0.707106781187,0.707106781187,0.));+#2570 = PCURVE('',#2438,#2571);+#2571 = DEFINITIONAL_REPRESENTATION('',(#2572),#2576);+#2572 = LINE('',#2573,#2574);+#2573 = CARTESIAN_POINT('',(3.627830838308,2.696727698935));+#2574 = VECTOR('',#2575,1.);+#2575 = DIRECTION('',(-0.989336133008,0.145650320716));+#2576 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2577 = PCURVE('',#2331,#2578);+#2578 = DEFINITIONAL_REPRESENTATION('',(#2579),#2582);+#2579 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2580,#2581),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,0.113258198781),.PIECEWISE_BEZIER_KNOTS.);+#2580 = CARTESIAN_POINT('',(4.744280477712E-16,1.));+#2581 = CARTESIAN_POINT('',(0.194454364826,1.));+#2582 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2583 = ORIENTED_EDGE('',*,*,#2584,.T.);+#2584 = EDGE_CURVE('',#2563,#2585,#2587,.T.);+#2585 = VERTEX_POINT('',#2586);+#2586 = CARTESIAN_POINT('',(-1.760171280765,2.180085640382,1.75));+#2587 = SURFACE_CURVE('',#2588,(#2592,#2599),.PCURVE_S1.);+#2588 = LINE('',#2589,#2590);+#2589 = CARTESIAN_POINT('',(-1.760171280765,-2.180085640382,1.75));+#2590 = VECTOR('',#2591,1.);+#2591 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#2592 = PCURVE('',#2438,#2593);+#2593 = DEFINITIONAL_REPRESENTATION('',(#2594),#2598);+#2594 = LINE('',#2595,#2596);+#2595 = CARTESIAN_POINT('',(3.515780409894,2.713223791911));+#2596 = VECTOR('',#2597,1.);+#2597 = DIRECTION('',(-0.802556617983,-0.596575959062));+#2598 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2599 = PCURVE('',#2303,#2600);+#2600 = DEFINITIONAL_REPRESENTATION('',(#2601),#2604);+#2601 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2602,#2603),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,4.360171280764),.PIECEWISE_BEZIER_KNOTS.);+#2602 = CARTESIAN_POINT('',(-6.678561801727E-17,1.));+#2603 = CARTESIAN_POINT('',(4.475,1.));+#2604 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2605 = ORIENTED_EDGE('',*,*,#2606,.T.);+#2606 = EDGE_CURVE('',#2585,#2474,#2607,.T.);+#2607 = SURFACE_CURVE('',#2608,(#2612,#2619),.PCURVE_S1.);+#2608 = LINE('',#2609,#2610);+#2609 = CARTESIAN_POINT('',(-1.760171280765,2.180085640382,1.75));+#2610 = VECTOR('',#2611,1.);+#2611 = DIRECTION('',(0.707106781187,0.707106781187,0.));+#2612 = PCURVE('',#2438,#2613);+#2613 = DEFINITIONAL_REPRESENTATION('',(#2614),#2618);+#2614 = LINE('',#2615,#2616);+#2615 = CARTESIAN_POINT('',(1.649609297621E-02,0.112050428413));+#2616 = VECTOR('',#2617,1.);+#2617 = DIRECTION('',(-0.145650320716,-0.989336133008));+#2618 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2619 = PCURVE('',#2275,#2620);+#2620 = DEFINITIONAL_REPRESENTATION('',(#2621),#2624);+#2621 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2622,#2623),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,0.113258198781),.PIECEWISE_BEZIER_KNOTS.);+#2622 = CARTESIAN_POINT('',(-6.960457594574E-17,1.));+#2623 = CARTESIAN_POINT('',(0.194454364826,1.));+#2624 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2625 = FACE_BOUND('',#2626,.F.);+#2626 = EDGE_LOOP('',(#2627,#2656,#2683,#2710,#2746,#2791,#2827,#2872,+ #2908,#2944,#2989));+#2627 = ORIENTED_EDGE('',*,*,#2628,.T.);+#2628 = EDGE_CURVE('',#2629,#2631,#2633,.T.);+#2629 = VERTEX_POINT('',#2630);+#2630 = CARTESIAN_POINT('',(0.848303576343,0.154416067762,1.75));+#2631 = VERTEX_POINT('',#2632);+#2632 = CARTESIAN_POINT('',(0.761247578956,0.154416067762,1.75));+#2633 = SURFACE_CURVE('',#2634,(#2638,#2645),.PCURVE_S1.);+#2634 = LINE('',#2635,#2636);+#2635 = CARTESIAN_POINT('',(-0.459419030713,0.154416067762,1.75));+#2636 = VECTOR('',#2637,1.);+#2637 = DIRECTION('',(-1.,-0.,-0.));+#2638 = PCURVE('',#2438,#2639);+#2639 = DEFINITIONAL_REPRESENTATION('',(#2640),#2644);+#2640 = LINE('',#2641,#2642);+#2641 = CARTESIAN_POINT('',(2.418208135407,0.276588869806));+#2642 = VECTOR('',#2643,1.);+#2643 = DIRECTION('',(-0.596575959062,0.802556617983));+#2644 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2645 = PCURVE('',#2646,#2651);+#2646 = PLANE('',#2647);+#2647 = AXIS2_PLACEMENT_3D('',#2648,#2649,#2650);+#2648 = CARTESIAN_POINT('',(0.761247578956,0.154416067762,1.8000001));+#2649 = DIRECTION('',(0.,-1.,0.));+#2650 = DIRECTION('',(1.,0.,0.));+#2651 = DEFINITIONAL_REPRESENTATION('',(#2652),#2655);+#2652 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2653,#2654),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-1.307722607056,-1.220666609669),.PIECEWISE_BEZIER_KNOTS.);+#2653 = CARTESIAN_POINT('',(8.705599738647E-02,-5.00001E-02));+#2654 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#2655 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2656 = ORIENTED_EDGE('',*,*,#2657,.T.);+#2657 = EDGE_CURVE('',#2631,#2658,#2660,.T.);+#2658 = VERTEX_POINT('',#2659);+#2659 = CARTESIAN_POINT('',(0.761247578956,-0.139644122505,1.75));+#2660 = SURFACE_CURVE('',#2661,(#2665,#2672),.PCURVE_S1.);+#2661 = LINE('',#2662,#2663);+#2662 = CARTESIAN_POINT('',(0.761247578956,1.06026357913,1.75));+#2663 = VECTOR('',#2664,1.);+#2664 = DIRECTION('',(0.,-1.,0.));+#2665 = PCURVE('',#2438,#2666);+#2666 = DEFINITIONAL_REPRESENTATION('',(#2667),#2671);+#2667 = LINE('',#2668,#2669);+#2668 = CARTESIAN_POINT('',(2.419434573634,-1.243472043994));+#2669 = VECTOR('',#2670,1.);+#2670 = DIRECTION('',(0.802556617983,0.596575959062));+#2671 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2672 = PCURVE('',#2673,#2678);+#2673 = PLANE('',#2674);+#2674 = AXIS2_PLACEMENT_3D('',#2675,#2676,#2677);+#2675 = CARTESIAN_POINT('',(0.761247578956,-0.139644122505,1.8000001));+#2676 = DIRECTION('',(1.,0.,0.));+#2677 = DIRECTION('',(0.,1.,0.));+#2678 = DEFINITIONAL_REPRESENTATION('',(#2679),#2682);+#2679 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2680,#2681),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.905847511368,1.199907701635),.PIECEWISE_BEZIER_KNOTS.);+#2680 = CARTESIAN_POINT('',(0.294060190267,-5.00001E-02));+#2681 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#2682 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2683 = ORIENTED_EDGE('',*,*,#2684,.T.);+#2684 = EDGE_CURVE('',#2658,#2685,#2687,.T.);+#2685 = VERTEX_POINT('',#2686);+#2686 = CARTESIAN_POINT('',(0.848303576343,-0.139644122505,1.75));+#2687 = SURFACE_CURVE('',#2688,(#2692,#2699),.PCURVE_S1.);+#2688 = LINE('',#2689,#2690);+#2689 = CARTESIAN_POINT('',(-0.41589103202,-0.139644122505,1.75));+#2690 = VECTOR('',#2691,1.);+#2691 = DIRECTION('',(1.,-0.,0.));+#2692 = PCURVE('',#2438,#2693);+#2693 = DEFINITIONAL_REPRESENTATION('',(#2694),#2698);+#2694 = LINE('',#2695,#2696);+#2695 = CARTESIAN_POINT('',(2.680175844758,0.417084426418));+#2696 = VECTOR('',#2697,1.);+#2697 = DIRECTION('',(0.596575959062,-0.802556617983));+#2698 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2699 = PCURVE('',#2700,#2705);+#2700 = PLANE('',#2701);+#2701 = AXIS2_PLACEMENT_3D('',#2702,#2703,#2704);+#2702 = CARTESIAN_POINT('',(0.848303576343,-0.139644122505,1.8000001));+#2703 = DIRECTION('',(0.,1.,0.));+#2704 = DIRECTION('',(-1.,0.,0.));+#2705 = DEFINITIONAL_REPRESENTATION('',(#2706),#2709);+#2706 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2707,#2708),.UNSPECIFIED.,.F.,+ .F.,(2,2),(1.177138610976,1.264194608362),.PIECEWISE_BEZIER_KNOTS.);+#2707 = CARTESIAN_POINT('',(8.705599738647E-02,-5.00001E-02));+#2708 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#2709 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2710 = ORIENTED_EDGE('',*,*,#2711,.T.);+#2711 = EDGE_CURVE('',#2685,#2712,#2714,.T.);+#2712 = VERTEX_POINT('',#2713);+#2713 = CARTESIAN_POINT('',(0.926299447304,-0.119258838049,1.75));+#2714 = SURFACE_CURVE('',#2715,(#2721,#2730),.PCURVE_S1.);+#2715 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2716,#2717,#2718,#2719,#2720),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2716 = CARTESIAN_POINT('',(0.848303576343,-0.139644122505,1.75));+#2717 = CARTESIAN_POINT('',(0.874153981533,-0.139644122505,1.75));+#2718 = CARTESIAN_POINT('',(0.89579851495,-0.13625964051,1.75));+#2719 = CARTESIAN_POINT('',(0.913185705866,-0.129463892476,1.75));+#2720 = CARTESIAN_POINT('',(0.926299447304,-0.119258838049,1.75));+#2721 = PCURVE('',#2438,#2722);+#2722 = DEFINITIONAL_REPRESENTATION('',(#2723),#2729);+#2723 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2724,#2725,#2726,#2727,#2728),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2724 = CARTESIAN_POINT('',(3.434363955683,-0.597503322942));+#2725 = CARTESIAN_POINT('',(3.449785685951,-0.618249736705));+#2726 = CARTESIAN_POINT('',(3.459982055809,-0.637639800834));+#2727 = CARTESIAN_POINT('',(3.464900863347,-0.655648185872));+#2728 = CARTESIAN_POINT('',(3.464534072255,-0.672260795983));+#2729 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2730 = PCURVE('',#2731,#2738);+#2731 = SURFACE_OF_LINEAR_EXTRUSION('',#2732,#2736);+#2732 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#2733,#2734,#2735),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2733 = CARTESIAN_POINT('',(0.926299447304,-0.119258838049,1.8000001));+#2734 = CARTESIAN_POINT('',(0.90010386438,-0.139644122505,1.8000001));+#2735 = CARTESIAN_POINT('',(0.848303576343,-0.139644122505,1.8000001));+#2736 = VECTOR('',#2737,1.);+#2737 = DIRECTION('',(0.,0.,1.));+#2738 = DEFINITIONAL_REPRESENTATION('',(#2739),#2745);+#2739 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2740,#2741,#2742,#2743,#2744),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2740 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#2741 = CARTESIAN_POINT('',(0.750480101852,-5.00001E-02));+#2742 = CARTESIAN_POINT('',(0.500524217585,-5.00001E-02));+#2743 = CARTESIAN_POINT('',(0.250304440193,-5.00001E-02));+#2744 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#2745 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2746 = ORIENTED_EDGE('',*,*,#2747,.T.);+#2747 = EDGE_CURVE('',#2712,#2748,#2750,.T.);+#2748 = VERTEX_POINT('',#2749);+#2749 = CARTESIAN_POINT('',(0.952495030228,-5.889082176143E-02,1.75));+#2750 = SURFACE_CURVE('',#2751,(#2760,#2772),.PCURVE_S1.);+#2751 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2752,#2753,#2754,#2755,#2756,+ #2757,#2758,#2759),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.269934737367,+ 1.),.UNSPECIFIED.);+#2752 = CARTESIAN_POINT('',(0.926299447304,-0.119258838049,1.75));+#2753 = CARTESIAN_POINT('',(0.929835488999,-0.116507106354,1.75));+#2754 = CARTESIAN_POINT('',(0.933053682881,-0.113517031666,1.75));+#2755 = CARTESIAN_POINT('',(0.935953698809,-0.110288646222,1.75));+#2756 = CARTESIAN_POINT('',(0.945517882004,-9.744659511286E-02,1.75));+#2757 = CARTESIAN_POINT('',(0.950171961569,-8.632916567196E-02,1.75));+#2758 = CARTESIAN_POINT('',(0.952495030228,-7.347343778645E-02,1.75));+#2759 = CARTESIAN_POINT('',(0.952495030228,-5.889082176144E-02,1.75));+#2760 = PCURVE('',#2438,#2761);+#2761 = DEFINITIONAL_REPRESENTATION('',(#2762),#2771);+#2762 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2763,#2764,#2765,#2766,#2767,+ #2768,#2769,#2770),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.269934737367,+ 1.),.UNSPECIFIED.);+#2763 = CARTESIAN_POINT('',(3.464534072255,-0.672260795983));+#2764 = CARTESIAN_POINT('',(3.464435169238,-0.676740286621));+#2765 = CARTESIAN_POINT('',(3.46395536211,-0.681106876094));+#2766 = CARTESIAN_POINT('',(3.463094479791,-0.685360280212));+#2767 = CARTESIAN_POINT('',(3.458493768447,-0.700697337687));+#2768 = CARTESIAN_POINT('',(3.452347913854,-0.711064891174));+#2769 = CARTESIAN_POINT('',(3.443416351274,-0.720598703493));+#2770 = CARTESIAN_POINT('',(3.431712976275,-0.729298341634));+#2771 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2772 = PCURVE('',#2773,#2780);+#2773 = SURFACE_OF_LINEAR_EXTRUSION('',#2774,#2778);+#2774 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#2775,#2776,#2777),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2775 = CARTESIAN_POINT('',(0.952495030228,-5.889082176143E-02,1.8000001+ ));+#2776 = CARTESIAN_POINT('',(0.952495030228,-9.887355359278E-02,1.8000001+ ));+#2777 = CARTESIAN_POINT('',(0.926299447304,-0.119258838049,1.8000001));+#2778 = VECTOR('',#2779,1.);+#2779 = DIRECTION('',(0.,0.,1.));+#2780 = DEFINITIONAL_REPRESENTATION('',(#2781),#2790);+#2781 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2782,#2783,#2784,#2785,#2786,+ #2787,#2788,#2789),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.269934737367,+ 1.),.UNSPECIFIED.);+#2782 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#2783 = CARTESIAN_POINT('',(0.932506909562,-5.00001E-02));+#2784 = CARTESIAN_POINT('',(0.865006883732,-5.00001E-02));+#2785 = CARTESIAN_POINT('',(0.797503414298,-5.00001E-02));+#2786 = CARTESIAN_POINT('',(0.547430322719,-5.00001E-02));+#2787 = CARTESIAN_POINT('',(0.364860996213,-5.00001E-02));+#2788 = CARTESIAN_POINT('',(0.182361426509,-5.00001E-02));+#2789 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#2790 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2791 = ORIENTED_EDGE('',*,*,#2792,.T.);+#2792 = EDGE_CURVE('',#2748,#2793,#2795,.T.);+#2793 = VERTEX_POINT('',#2794);+#2794 = CARTESIAN_POINT('',(0.936048931175,-6.992054088732E-03,1.75));+#2795 = SURFACE_CURVE('',#2796,(#2802,#2811),.PCURVE_S1.);+#2796 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2797,#2798,#2799,#2800,#2801),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2797 = CARTESIAN_POINT('',(0.952495030228,-5.889082176144E-02,1.75));+#2798 = CARTESIAN_POINT('',(0.952495030228,-4.314096431045E-02,1.75));+#2799 = CARTESIAN_POINT('',(0.949756409999,-2.923685105491E-02,1.75));+#2800 = CARTESIAN_POINT('',(0.944273420503,-1.718648098096E-02,1.75));+#2801 = CARTESIAN_POINT('',(0.936048931175,-6.992054088732E-03,1.75));+#2802 = PCURVE('',#2438,#2803);+#2803 = DEFINITIONAL_REPRESENTATION('',(#2804),#2810);+#2804 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2805,#2806,#2807,#2808,#2809),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2805 = CARTESIAN_POINT('',(3.431712976275,-0.729298341634));+#2806 = CARTESIAN_POINT('',(3.419072823946,-0.738694327948));+#2807 = CARTESIAN_POINT('',(3.406280190845,-0.744791289859));+#2808 = CARTESIAN_POINT('',(3.393338066876,-0.747579841437));+#2809 = CARTESIAN_POINT('',(3.380249929499,-0.747060973097));+#2810 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2811 = PCURVE('',#2812,#2819);+#2812 = SURFACE_OF_LINEAR_EXTRUSION('',#2813,#2817);+#2813 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#2814,#2815,#2816),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2814 = CARTESIAN_POINT('',(0.936048931175,-6.992054088732E-03,1.8000001+ ));+#2815 = CARTESIAN_POINT('',(0.952495030228,-2.737733854461E-02,1.8000001+ ));+#2816 = CARTESIAN_POINT('',(0.952495030228,-5.889082176143E-02,1.8000001+ ));+#2817 = VECTOR('',#2818,1.);+#2818 = DIRECTION('',(0.,0.,1.));+#2819 = DEFINITIONAL_REPRESENTATION('',(#2820),#2826);+#2820 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2821,#2822,#2823,#2824,#2825),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2821 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#2822 = CARTESIAN_POINT('',(0.750109225587,-5.00001E-02));+#2823 = CARTESIAN_POINT('',(0.500102085693,-5.00001E-02));+#2824 = CARTESIAN_POINT('',(0.250043773348,-5.00001E-02));+#2825 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#2826 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2827 = ORIENTED_EDGE('',*,*,#2828,.T.);+#2828 = EDGE_CURVE('',#2793,#2829,#2831,.T.);+#2829 = VERTEX_POINT('',#2830);+#2830 = CARTESIAN_POINT('',(0.890649819415,1.772633430946E-02,1.75));+#2831 = SURFACE_CURVE('',#2832,(#2841,#2853),.PCURVE_S1.);+#2832 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2833,#2834,#2835,#2836,#2837,+ #2838,#2839,#2840),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.293976375231,+ 1.),.UNSPECIFIED.);+#2833 = CARTESIAN_POINT('',(0.936048931175,-6.992054088732E-03,1.75));+#2834 = CARTESIAN_POINT('',(0.933631469386,-3.99555953596E-03,1.75));+#2835 = CARTESIAN_POINT('',(0.931033735249,-1.230148370269E-03,1.75));+#2836 = CARTESIAN_POINT('',(0.928255747741,1.304058689623E-03,1.75));+#2837 = CARTESIAN_POINT('',(0.918193135069,9.137845350287E-03,1.75));+#2838 = CARTESIAN_POINT('',(0.910049425264,1.333481845723E-02,1.75));+#2839 = CARTESIAN_POINT('',(0.900867426368,1.619716864302E-02,1.75));+#2840 = CARTESIAN_POINT('',(0.890649819415,1.772633430946E-02,1.75));+#2841 = PCURVE('',#2438,#2842);+#2842 = DEFINITIONAL_REPRESENTATION('',(#2843),#2852);+#2843 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2844,#2845,#2846,#2847,#2848,+ #2849,#2850,#2851),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.293976375231,+ 1.),.UNSPECIFIED.);+#2844 = CARTESIAN_POINT('',(3.380249929499,-0.747060973097));+#2845 = CARTESIAN_POINT('',(3.376402873379,-0.746908459751));+#2846 = CARTESIAN_POINT('',(3.372633728613,-0.746473408846));+#2847 = CARTESIAN_POINT('',(3.368942603404,-0.745755763594));+#2848 = CARTESIAN_POINT('',(3.35665243327,-0.74235339599));+#2849 = CARTESIAN_POINT('',(3.34842578324,-0.738321421048));+#2850 = CARTESIAN_POINT('',(3.340650825358,-0.732659956375));+#2851 = CARTESIAN_POINT('',(3.333328004665,-0.725372011769));+#2852 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2853 = PCURVE('',#2854,#2861);+#2854 = SURFACE_OF_LINEAR_EXTRUSION('',#2855,#2859);+#2855 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#2856,#2857,#2858),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2856 = CARTESIAN_POINT('',(0.890649819415,1.772633430946E-02,1.8000001)+ );+#2857 = CARTESIAN_POINT('',(0.919602832121,1.339323036715E-02,1.8000001)+ );+#2858 = CARTESIAN_POINT('',(0.936048931175,-6.992054088732E-03,1.8000001+ ));+#2859 = VECTOR('',#2860,1.);+#2860 = DIRECTION('',(0.,0.,1.));+#2861 = DEFINITIONAL_REPRESENTATION('',(#2862),#2871);+#2862 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2863,#2864,#2865,#2866,#2867,+ #2868,#2869,#2870),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.293976375231,+ 1.),.UNSPECIFIED.);+#2863 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#2864 = CARTESIAN_POINT('',(0.926503489337,-5.00001E-02));+#2865 = CARTESIAN_POINT('',(0.853003486744,-5.00001E-02));+#2866 = CARTESIAN_POINT('',(0.779501740376,-5.00001E-02));+#2867 = CARTESIAN_POINT('',(0.529475729551,-5.00001E-02));+#2868 = CARTESIAN_POINT('',(0.352951486748,-5.00001E-02));+#2869 = CARTESIAN_POINT('',(0.176451532989,-5.00001E-02));+#2870 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#2871 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2872 = ORIENTED_EDGE('',*,*,#2873,.T.);+#2873 = EDGE_CURVE('',#2829,#2874,#2876,.T.);+#2874 = VERTEX_POINT('',#2875);+#2875 = CARTESIAN_POINT('',(0.929352315991,3.722530204987E-02,1.75));+#2876 = SURFACE_CURVE('',#2877,(#2883,#2892),.PCURVE_S1.);+#2877 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2878,#2879,#2880,#2881,#2882),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2878 = CARTESIAN_POINT('',(0.890649819415,1.772633430946E-02,1.75));+#2879 = CARTESIAN_POINT('',(0.90354584894,1.969519377891E-02,1.75));+#2880 = CARTESIAN_POINT('',(0.914298263389,2.36001283105E-02,1.75));+#2881 = CARTESIAN_POINT('',(0.922900791116,2.944407357461E-02,1.75));+#2882 = CARTESIAN_POINT('',(0.929352315991,3.722530204987E-02,1.75));+#2883 = PCURVE('',#2438,#2884);+#2884 = DEFINITIONAL_REPRESENTATION('',(#2885),#2891);+#2885 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2886,#2887,#2888,#2889,#2890),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2886 = CARTESIAN_POINT('',(3.333328004665,-0.725372011769));+#2887 = CARTESIAN_POINT('',(3.33944134465,-0.736896379836));+#2888 = CARTESIAN_POINT('',(3.342722045561,-0.747855391274));+#2889 = CARTESIAN_POINT('',(3.343164009843,-0.758245764084));+#2890 = CARTESIAN_POINT('',(3.340767958074,-0.768065571909));+#2891 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2892 = PCURVE('',#2893,#2900);+#2893 = SURFACE_OF_LINEAR_EXTRUSION('',#2894,#2898);+#2894 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#2895,#2896,#2897),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2895 = CARTESIAN_POINT('',(0.929352315991,3.722530204987E-02,1.8000001)+ );+#2896 = CARTESIAN_POINT('',(0.916451483799,2.166551971156E-02,1.8000001)+ );+#2897 = CARTESIAN_POINT('',(0.890649819415,1.772633430946E-02,1.8000001)+ );+#2898 = VECTOR('',#2899,1.);+#2899 = DIRECTION('',(0.,0.,1.));+#2900 = DEFINITIONAL_REPRESENTATION('',(#2901),#2907);+#2901 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2902,#2903,#2904,#2905,#2906),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2902 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#2903 = CARTESIAN_POINT('',(0.750093068938,-5.00001E-02));+#2904 = CARTESIAN_POINT('',(0.500090753884,-5.00001E-02));+#2905 = CARTESIAN_POINT('',(0.250042973162,-5.00001E-02));+#2906 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#2907 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2908 = ORIENTED_EDGE('',*,*,#2909,.T.);+#2909 = EDGE_CURVE('',#2874,#2910,#2912,.T.);+#2910 = VERTEX_POINT('',#2911);+#2911 = CARTESIAN_POINT('',(0.942253148183,7.976850439258E-02,1.75));+#2912 = SURFACE_CURVE('',#2913,(#2919,#2928),.PCURVE_S1.);+#2913 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2914,#2915,#2916,#2917,#2918),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2914 = CARTESIAN_POINT('',(0.929352315991,3.722530204987E-02,1.75));+#2915 = CARTESIAN_POINT('',(0.935804152308,4.500690615713E-02,1.75));+#2916 = CARTESIAN_POINT('',(0.940104805274,5.469317256866E-02,1.75));+#2917 = CARTESIAN_POINT('',(0.942253148183,6.628242644376E-02,1.75));+#2918 = CARTESIAN_POINT('',(0.942253148183,7.976850439258E-02,1.75));+#2919 = PCURVE('',#2438,#2920);+#2920 = DEFINITIONAL_REPRESENTATION('',(#2921),#2927);+#2921 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2922,#2923,#2924,#2925,#2926),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2922 = CARTESIAN_POINT('',(3.340767958074,-0.768065571909));+#2923 = CARTESIAN_POINT('',(3.338371790638,-0.777885853776));+#2924 = CARTESIAN_POINT('',(3.333163679594,-0.78711596495));+#2925 = CARTESIAN_POINT('',(3.32514429693,-0.795754002015));+#2926 = CARTESIAN_POINT('',(3.314320955821,-0.803799471901));+#2927 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2928 = PCURVE('',#2929,#2936);+#2929 = SURFACE_OF_LINEAR_EXTRUSION('',#2930,#2934);+#2930 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#2931,#2932,#2933),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2931 = CARTESIAN_POINT('',(0.942253148183,7.976850439258E-02,1.8000001)+ );+#2932 = CARTESIAN_POINT('',(0.942253148183,5.278508438818E-02,1.8000001)+ );+#2933 = CARTESIAN_POINT('',(0.929352315991,3.722530204987E-02,1.8000001)+ );+#2934 = VECTOR('',#2935,1.);+#2935 = DIRECTION('',(0.,0.,1.));+#2936 = DEFINITIONAL_REPRESENTATION('',(#2937),#2943);+#2937 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2938,#2939,#2940,#2941,#2942),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2938 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#2939 = CARTESIAN_POINT('',(0.749944956232,-5.00001E-02));+#2940 = CARTESIAN_POINT('',(0.499893661838,-5.00001E-02));+#2941 = CARTESIAN_POINT('',(0.24989563863,-5.00001E-02));+#2942 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#2943 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2944 = ORIENTED_EDGE('',*,*,#2945,.T.);+#2945 = EDGE_CURVE('',#2910,#2946,#2948,.T.);+#2946 = VERTEX_POINT('',#2947);+#2947 = CARTESIAN_POINT('',(0.91783019869,0.134917100022,1.75));+#2948 = SURFACE_CURVE('',#2949,(#2958,#2970),.PCURVE_S1.);+#2949 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2950,#2951,#2952,#2953,#2954,+ #2955,#2956,#2957),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.672043002131,+ 1.),.UNSPECIFIED.);+#2950 = CARTESIAN_POINT('',(0.942253148183,7.976850439258E-02,1.75));+#2951 = CARTESIAN_POINT('',(0.942253148183,9.174063095208E-02,1.75));+#2952 = CARTESIAN_POINT('',(0.940416867269,0.102504586114,1.75));+#2953 = CARTESIAN_POINT('',(0.936740056784,0.112054501276,1.75));+#2954 = CARTESIAN_POINT('',(0.928532365003,0.124455081686,1.75));+#2955 = CARTESIAN_POINT('',(0.925402621796,0.128232310468,1.75));+#2956 = CARTESIAN_POINT('',(0.921835070771,0.131719661828,1.75));+#2957 = CARTESIAN_POINT('',(0.91783019869,0.134917100022,1.75));+#2958 = PCURVE('',#2438,#2959);+#2959 = DEFINITIONAL_REPRESENTATION('',(#2960),#2969);+#2960 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2961,#2962,#2963,#2964,#2965,+ #2966,#2967,#2968),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.672043002131,+ 1.),.UNSPECIFIED.);+#2961 = CARTESIAN_POINT('',(3.314320955821,-0.803799471901));+#2962 = CARTESIAN_POINT('',(3.30471264642,-0.810941754785));+#2963 = CARTESIAN_POINT('',(3.294978481921,-0.815889552259));+#2964 = CARTESIAN_POINT('',(3.285120637566,-0.818635953468));+#2965 = CARTESIAN_POINT('',(3.270271958095,-0.819446704262));+#2966 = CARTESIAN_POINT('',(3.265373388583,-0.819188312022));+#2967 = CARTESIAN_POINT('',(3.260446276495,-0.818405620319));+#2968 = CARTESIAN_POINT('',(3.25549094091,-0.817098998483));+#2969 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2970 = PCURVE('',#2971,#2978);+#2971 = SURFACE_OF_LINEAR_EXTRUSION('',#2972,#2976);+#2972 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#2973,#2974,#2975),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2973 = CARTESIAN_POINT('',(0.91783019869,0.134917100022,1.8000001));+#2974 = CARTESIAN_POINT('',(0.942253148183,0.115418132282,1.8000001));+#2975 = CARTESIAN_POINT('',(0.942253148183,7.976850439258E-02,1.8000001)+ );+#2976 = VECTOR('',#2977,1.);+#2977 = DIRECTION('',(0.,0.,1.));+#2978 = DEFINITIONAL_REPRESENTATION('',(#2979),#2988);+#2979 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2980,#2981,#2982,#2983,#2984,+ #2985,#2986,#2987),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.672043002131,+ 1.),.UNSPECIFIED.);+#2980 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#2981 = CARTESIAN_POINT('',(0.832086233876,-5.00001E-02));+#2982 = CARTESIAN_POINT('',(0.664086304153,-5.00001E-02));+#2983 = CARTESIAN_POINT('',(0.496043114609,-5.00001E-02));+#2984 = CARTESIAN_POINT('',(0.245994956863,-5.00001E-02));+#2985 = CARTESIAN_POINT('',(0.163989925915,-5.00001E-02));+#2986 = CARTESIAN_POINT('',(8.19899349567E-02,-5.00001E-02));+#2987 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#2988 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2989 = ORIENTED_EDGE('',*,*,#2990,.T.);+#2990 = EDGE_CURVE('',#2946,#2629,#2991,.T.);+#2991 = SURFACE_CURVE('',#2992,(#2998,#3007),.PCURVE_S1.);+#2992 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2993,#2994,#2995,#2996,#2997),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2993 = CARTESIAN_POINT('',(0.91783019869,0.134917100022,1.75));+#2994 = CARTESIAN_POINT('',(0.905609141642,0.144674234278,1.75));+#2995 = CARTESIAN_POINT('',(0.889937894012,0.151174810808,1.75));+#2996 = CARTESIAN_POINT('',(0.870825703039,0.154416067762,1.75));+#2997 = CARTESIAN_POINT('',(0.848303576343,0.154416067762,1.75));+#2998 = PCURVE('',#2438,#2999);+#2999 = DEFINITIONAL_REPRESENTATION('',(#3000),#3006);+#3000 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3001,#3002,#3003,#3004,#3005),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3001 = CARTESIAN_POINT('',(3.25549094091,-0.817098998483));+#3002 = CARTESIAN_POINT('',(3.24036949941,-0.813111779997));+#3003 = CARTESIAN_POINT('',(3.225803329112,-0.804412804178));+#3004 = CARTESIAN_POINT('',(3.211800163233,-0.791007844804));+#3005 = CARTESIAN_POINT('',(3.198364003899,-0.772932562973));+#3006 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3007 = PCURVE('',#3008,#3015);+#3008 = SURFACE_OF_LINEAR_EXTRUSION('',#3009,#3013);+#3009 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3010,#3011,#3012),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3010 = CARTESIAN_POINT('',(0.848303576343,0.154416067762,1.8000001));+#3011 = CARTESIAN_POINT('',(0.893407249197,0.154416067762,1.8000001));+#3012 = CARTESIAN_POINT('',(0.91783019869,0.134917100022,1.8000001));+#3013 = VECTOR('',#3014,1.);+#3014 = DIRECTION('',(0.,0.,1.));+#3015 = DEFINITIONAL_REPRESENTATION('',(#3016),#3022);+#3016 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3017,#3018,#3019,#3020,#3021),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3017 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3018 = CARTESIAN_POINT('',(0.749803825872,-5.00001E-02));+#3019 = CARTESIAN_POINT('',(0.499649048375,-5.00001E-02));+#3020 = CARTESIAN_POINT('',(0.249670650649,-5.00001E-02));+#3021 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3022 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3023 = FACE_BOUND('',#3024,.F.);+#3024 = EDGE_LOOP('',(#3025,#3063,#3090,#3126,#3162,#3207,#3243,#3279,+ #3324,#3369,#3405,#3441,#3486,#3522,#3558,#3594,#3639));+#3025 = ORIENTED_EDGE('',*,*,#3026,.T.);+#3026 = EDGE_CURVE('',#3027,#3029,#3031,.T.);+#3027 = VERTEX_POINT('',#3028);+#3028 = CARTESIAN_POINT('',(0.654495654559,0.12241018637,1.75));+#3029 = VERTEX_POINT('',#3030);+#3030 = CARTESIAN_POINT('',(0.680888196753,0.111281987609,1.75));+#3031 = SURFACE_CURVE('',#3032,(#3038,#3047),.PCURVE_S1.);+#3032 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3033,#3034,#3035,#3036,#3037),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3033 = CARTESIAN_POINT('',(0.654495654559,0.12241018637,1.75));+#3034 = CARTESIAN_POINT('',(0.661487652638,0.12048984887,1.75));+#3035 = CARTESIAN_POINT('',(0.668217124501,0.117995033531,1.75));+#3036 = CARTESIAN_POINT('',(0.674683989405,0.114925728433,1.75));+#3037 = CARTESIAN_POINT('',(0.680888196753,0.111281987609,1.75));+#3038 = PCURVE('',#2438,#3039);+#3039 = DEFINITIONAL_REPRESENTATION('',(#3040),#3046);+#3040 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3041,#3042,#3043,#3044,#3045),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3041 = CARTESIAN_POINT('',(3.108429389012,-0.598296793341));+#3042 = CARTESIAN_POINT('',(3.114141826542,-0.602762640486));+#3043 = CARTESIAN_POINT('',(3.120158698233,-0.606675075812));+#3044 = CARTESIAN_POINT('',(3.126479965484,-0.610034027405));+#3045 = CARTESIAN_POINT('',(3.133105554746,-0.612839486896));+#3046 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3047 = PCURVE('',#3048,#3055);+#3048 = SURFACE_OF_LINEAR_EXTRUSION('',#3049,#3053);+#3049 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3050,#3051,#3052),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3050 = CARTESIAN_POINT('',(0.680888196753,0.111281987609,1.8000001));+#3051 = CARTESIAN_POINT('',(0.668479762737,0.118569480603,1.8000001));+#3052 = CARTESIAN_POINT('',(0.654495654559,0.12241018637,1.8000001));+#3053 = VECTOR('',#3054,1.);+#3054 = DIRECTION('',(0.,0.,1.));+#3055 = DEFINITIONAL_REPRESENTATION('',(#3056),#3062);+#3056 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3057,#3058,#3059,#3060,#3061),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3057 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3058 = CARTESIAN_POINT('',(0.750002002632,-5.00001E-02));+#3059 = CARTESIAN_POINT('',(0.50000107561,-5.00001E-02));+#3060 = CARTESIAN_POINT('',(0.249999610749,-5.00001E-02));+#3061 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3062 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3063 = ORIENTED_EDGE('',*,*,#3064,.T.);+#3064 = EDGE_CURVE('',#3029,#3065,#3067,.T.);+#3065 = VERTEX_POINT('',#3066);+#3066 = CARTESIAN_POINT('',(0.680888196753,0.147916411849,1.75));+#3067 = SURFACE_CURVE('',#3068,(#3072,#3079),.PCURVE_S1.);+#3068 = LINE('',#3069,#3070);+#3069 = CARTESIAN_POINT('',(0.680888196753,1.204043846307,1.75));+#3070 = VECTOR('',#3071,1.);+#3071 = DIRECTION('',(0.,1.,0.));+#3072 = PCURVE('',#2438,#3073);+#3073 = DEFINITIONAL_REPRESENTATION('',(#3074),#3078);+#3074 = LINE('',#3075,#3076);+#3075 = CARTESIAN_POINT('',(2.256102293168,-1.264754940775));+#3076 = VECTOR('',#3077,1.);+#3077 = DIRECTION('',(-0.802556617983,-0.596575959062));+#3078 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3079 = PCURVE('',#3080,#3085);+#3080 = PLANE('',#3081);+#3081 = AXIS2_PLACEMENT_3D('',#3082,#3083,#3084);+#3082 = CARTESIAN_POINT('',(0.680888196753,0.147916411849,1.8000001));+#3083 = DIRECTION('',(-1.,0.,0.));+#3084 = DIRECTION('',(0.,-1.,0.));+#3085 = DEFINITIONAL_REPRESENTATION('',(#3086),#3089);+#3086 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3087,#3088),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-1.092761858698,-1.056127434458),.PIECEWISE_BEZIER_KNOTS.);+#3087 = CARTESIAN_POINT('',(3.663442423955E-02,-5.00001E-02));+#3088 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3089 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3090 = ORIENTED_EDGE('',*,*,#3091,.T.);+#3091 = EDGE_CURVE('',#3065,#3092,#3094,.T.);+#3092 = VERTEX_POINT('',#3093);+#3093 = CARTESIAN_POINT('',(0.652723021128,0.156681099369,1.75));+#3094 = SURFACE_CURVE('',#3095,(#3101,#3110),.PCURVE_S1.);+#3095 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3096,#3097,#3098,#3099,#3100),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3096 = CARTESIAN_POINT('',(0.680888196753,0.147916411849,1.75));+#3097 = CARTESIAN_POINT('',(0.674093090039,0.150772326265,1.75));+#3098 = CARTESIAN_POINT('',(0.667133833696,0.153185087635,1.75));+#3099 = CARTESIAN_POINT('',(0.660010462339,0.155154675872,1.75));+#3100 = CARTESIAN_POINT('',(0.652723021128,0.156681099369,1.75));+#3101 = PCURVE('',#2438,#3102);+#3102 = DEFINITIONAL_REPRESENTATION('',(#3103),#3109);+#3103 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3104,#3105,#3106,#3107,#3108),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3104 = CARTESIAN_POINT('',(3.103704355126,-0.634694703671));+#3105 = CARTESIAN_POINT('',(3.097358524806,-0.630945015689));+#3106 = CARTESIAN_POINT('',(3.091270422174,-0.626799213883));+#3107 = CARTESIAN_POINT('',(3.085440084,-0.62225731405));+#3108 = CARTESIAN_POINT('',(3.079867530492,-0.617319357439));+#3109 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3110 = PCURVE('',#3111,#3118);+#3111 = SURFACE_OF_LINEAR_EXTRUSION('',#3112,#3116);+#3112 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3113,#3114,#3115),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3113 = CARTESIAN_POINT('',(0.652723021128,0.156681099369,1.8000001));+#3114 = CARTESIAN_POINT('',(0.667298007116,0.153628230682,1.8000001));+#3115 = CARTESIAN_POINT('',(0.680888196753,0.147916411849,1.8000001));+#3116 = VECTOR('',#3117,1.);+#3117 = DIRECTION('',(0.,0.,1.));+#3118 = DEFINITIONAL_REPRESENTATION('',(#3119),#3125);+#3119 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3120,#3121,#3122,#3123,#3124),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3120 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3121 = CARTESIAN_POINT('',(0.749999562334,-5.00001E-02));+#3122 = CARTESIAN_POINT('',(0.499998523909,-5.00001E-02));+#3123 = CARTESIAN_POINT('',(0.24999822355,-5.00001E-02));+#3124 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3125 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3126 = ORIENTED_EDGE('',*,*,#3127,.T.);+#3127 = EDGE_CURVE('',#3092,#3128,#3130,.T.);+#3128 = VERTEX_POINT('',#3129);+#3129 = CARTESIAN_POINT('',(0.623573049153,0.159733968055,1.75));+#3130 = SURFACE_CURVE('',#3131,(#3137,#3146),.PCURVE_S1.);+#3131 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3132,#3133,#3134,#3135,#3136),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3132 = CARTESIAN_POINT('',(0.652723021128,0.156681099369,1.75));+#3133 = CARTESIAN_POINT('',(0.645435618614,0.15820751476,1.75));+#3134 = CARTESIAN_POINT('',(0.638148125623,0.15922515029,1.75));+#3135 = CARTESIAN_POINT('',(0.630860587387,0.159733968055,1.75));+#3136 = CARTESIAN_POINT('',(0.623573049153,0.159733968055,1.75));+#3137 = PCURVE('',#2438,#3138);+#3138 = DEFINITIONAL_REPRESENTATION('',(#3139),#3145);+#3139 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3140,#3141,#3142,#3143,#3144),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3140 = CARTESIAN_POINT('',(3.079867530492,-0.617319357439));+#3141 = CARTESIAN_POINT('',(3.074295006574,-0.61238142705));+#3142 = CARTESIAN_POINT('',(3.069130753324,-0.607139898213));+#3143 = CARTESIAN_POINT('',(3.064374828147,-0.60159478462));+#3144 = CARTESIAN_POINT('',(3.060027258036,-0.595746122581));+#3145 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3146 = PCURVE('',#3147,#3154);+#3147 = SURFACE_OF_LINEAR_EXTRUSION('',#3148,#3152);+#3148 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3149,#3150,#3151),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3149 = CARTESIAN_POINT('',(0.623573049153,0.159733968055,1.8000001));+#3150 = CARTESIAN_POINT('',(0.638148035141,0.159733968055,1.8000001));+#3151 = CARTESIAN_POINT('',(0.652723021128,0.156681099369,1.8000001));+#3152 = VECTOR('',#3153,1.);+#3153 = DIRECTION('',(0.,0.,1.));+#3154 = DEFINITIONAL_REPRESENTATION('',(#3155),#3161);+#3155 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3156,#3157,#3158,#3159,#3160),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3156 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3157 = CARTESIAN_POINT('',(0.75000310394,-5.00001E-02));+#3158 = CARTESIAN_POINT('',(0.500003104029,-5.00001E-02));+#3159 = CARTESIAN_POINT('',(0.250001551999,-5.00001E-02));+#3160 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3161 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3162 = ORIENTED_EDGE('',*,*,#3163,.T.);+#3163 = EDGE_CURVE('',#3128,#3164,#3166,.T.);+#3164 = VERTEX_POINT('',#3165);+#3165 = CARTESIAN_POINT('',(0.540554716804,0.120637552939,1.75));+#3166 = SURFACE_CURVE('',#3167,(#3176,#3188),.PCURVE_S1.);+#3167 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3168,#3169,#3170,#3171,#3172,+ #3173,#3174,#3175),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.640091502427,+ 1.),.UNSPECIFIED.);+#3168 = CARTESIAN_POINT('',(0.623573049153,0.159733968055,1.75));+#3169 = CARTESIAN_POINT('',(0.606198093359,0.159733968055,1.75));+#3170 = CARTESIAN_POINT('',(0.590553208492,0.157071279642,1.75));+#3171 = CARTESIAN_POINT('',(0.576657861768,0.151731727225,1.75));+#3172 = CARTESIAN_POINT('',(0.557694074499,0.139215312352,1.75));+#3173 = CARTESIAN_POINT('',(0.551424258629,0.133865751875,1.75));+#3174 = CARTESIAN_POINT('',(0.545711132293,0.127672250359,1.75));+#3175 = CARTESIAN_POINT('',(0.540554716804,0.120637552939,1.75));+#3176 = PCURVE('',#2438,#3177);+#3177 = DEFINITIONAL_REPRESENTATION('',(#3178),#3187);+#3178 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3179,#3180,#3181,#3182,#3183,+ #3184,#3185,#3186),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.640091502427,+ 1.),.UNSPECIFIED.);+#3179 = CARTESIAN_POINT('',(3.060027258036,-0.595746122581));+#3180 = CARTESIAN_POINT('',(3.04966177712,-0.581801736822));+#3181 = CARTESIAN_POINT('',(3.042465373133,-0.56765733504));+#3182 = CARTESIAN_POINT('',(3.038461036464,-0.553320083963));+#3183 = CARTESIAN_POINT('',(3.037192828476,-0.530633578782));+#3184 = CARTESIAN_POINT('',(3.037745732225,-0.522410277389));+#3185 = CARTESIAN_POINT('',(3.039308054031,-0.514130275933));+#3186 = CARTESIAN_POINT('',(3.041877603485,-0.505795229197));+#3187 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3188 = PCURVE('',#3189,#3196);+#3189 = SURFACE_OF_LINEAR_EXTRUSION('',#3190,#3194);+#3190 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3191,#3192,#3193),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3191 = CARTESIAN_POINT('',(0.540554716804,0.120637552939,1.8000001));+#3192 = CARTESIAN_POINT('',(0.569212290604,0.159733968055,1.8000001));+#3193 = CARTESIAN_POINT('',(0.623573049153,0.159733968055,1.8000001));+#3194 = VECTOR('',#3195,1.);+#3195 = DIRECTION('',(0.,0.,1.));+#3196 = DEFINITIONAL_REPRESENTATION('',(#3197),#3206);+#3197 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3198,#3199,#3200,#3201,#3202,+ #3203,#3204,#3205),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.640091502427,+ 1.),.UNSPECIFIED.);+#3198 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3199 = CARTESIAN_POINT('',(0.840188435029,-5.00001E-02));+#3200 = CARTESIAN_POINT('',(0.68018866203,-5.00001E-02));+#3201 = CARTESIAN_POINT('',(0.520094018073,-5.00001E-02));+#3202 = CARTESIAN_POINT('',(0.26998287386,-5.00001E-02));+#3203 = CARTESIAN_POINT('',(0.179965905888,-5.00001E-02));+#3204 = CARTESIAN_POINT('',(8.996601605427E-02,-5.00001E-02));+#3205 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3206 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3207 = ORIENTED_EDGE('',*,*,#3208,.T.);+#3208 = EDGE_CURVE('',#3164,#3209,#3211,.T.);+#3209 = VERTEX_POINT('',#3210);+#3210 = CARTESIAN_POINT('',(0.511897143003,7.090533723785E-03,1.75));+#3211 = SURFACE_CURVE('',#3212,(#3218,#3227),.PCURVE_S1.);+#3212 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3213,#3214,#3215,#3216,#3217),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3213 = CARTESIAN_POINT('',(0.540554716804,0.120637552939,1.75));+#3214 = CARTESIAN_POINT('',(0.526190478375,0.101040980239,1.75));+#3215 = CARTESIAN_POINT('',(0.516636937499,7.553716482006E-02,1.75));+#3216 = CARTESIAN_POINT('',(0.511897143003,4.417404969823E-02,1.75));+#3217 = CARTESIAN_POINT('',(0.511897143003,7.090533723785E-03,1.75));+#3218 = PCURVE('',#2438,#3219);+#3219 = DEFINITIONAL_REPRESENTATION('',(#3220),#3226);+#3220 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3221,#3222,#3223,#3224,#3225),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3221 = CARTESIAN_POINT('',(3.041877603485,-0.505795229197));+#3222 = CARTESIAN_POINT('',(3.04903560328,-0.48257627043));+#3223 = CARTESIAN_POINT('',(3.063804446317,-0.459694049832));+#3224 = CARTESIAN_POINT('',(3.086147474472,-0.437179615908));+#3225 = CARTESIAN_POINT('',(3.115909095635,-0.415056481801));+#3226 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3227 = PCURVE('',#3228,#3235);+#3228 = SURFACE_OF_LINEAR_EXTRUSION('',#3229,#3233);+#3229 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3230,#3231,#3232),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3230 = CARTESIAN_POINT('',(0.511897143003,7.090533723785E-03,1.8000001)+ );+#3231 = CARTESIAN_POINT('',(0.511897143003,8.154113782353E-02,1.8000001)+ );+#3232 = CARTESIAN_POINT('',(0.540554716804,0.120637552939,1.8000001));+#3233 = VECTOR('',#3234,1.);+#3234 = DIRECTION('',(0.,0.,1.));+#3235 = DEFINITIONAL_REPRESENTATION('',(#3236),#3242);+#3236 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3237,#3238,#3239,#3240,#3241),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3237 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3238 = CARTESIAN_POINT('',(0.749381463201,-5.00001E-02));+#3239 = CARTESIAN_POINT('',(0.498948311669,-5.00001E-02));+#3240 = CARTESIAN_POINT('',(0.249047784251,-5.00001E-02));+#3241 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3242 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3243 = ORIENTED_EDGE('',*,*,#3244,.T.);+#3244 = EDGE_CURVE('',#3209,#3245,#3247,.T.);+#3245 = VERTEX_POINT('',#3246);+#3246 = CARTESIAN_POINT('',(0.535729214686,-0.108623037463,1.75));+#3247 = SURFACE_CURVE('',#3248,(#3254,#3263),.PCURVE_S1.);+#3248 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3249,#3250,#3251,#3252,#3253),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3249 = CARTESIAN_POINT('',(0.511897143003,7.090533723785E-03,1.75));+#3250 = CARTESIAN_POINT('',(0.511897143003,-3.220246380691E-02,1.75));+#3251 = CARTESIAN_POINT('',(0.515829362172,-6.469460115766E-02,1.75));+#3252 = CARTESIAN_POINT('',(0.523771476696,-9.01923090731E-02,1.75));+#3253 = CARTESIAN_POINT('',(0.535729214686,-0.108623037463,1.75));+#3254 = PCURVE('',#2438,#3255);+#3255 = DEFINITIONAL_REPRESENTATION('',(#3256),#3262);+#3256 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3257,#3258,#3259,#3260,#3261),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3257 = CARTESIAN_POINT('',(3.115909095635,-0.415056481801));+#3258 = CARTESIAN_POINT('',(3.147443950844,-0.391615224114));+#3259 = CARTESIAN_POINT('',(3.175866598129,-0.37538702463));+#3260 = CARTESIAN_POINT('',(3.201068026949,-0.366549701648));+#3261 = CARTESIAN_POINT('',(3.222993429002,-0.365151133943));+#3262 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3263 = PCURVE('',#3264,#3271);+#3264 = SURFACE_OF_LINEAR_EXTRUSION('',#3265,#3269);+#3265 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3266,#3267,#3268),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3266 = CARTESIAN_POINT('',(0.535729214686,-0.108623037463,1.8000001));+#3267 = CARTESIAN_POINT('',(0.511897143003,-7.189013358837E-02,1.8000001+ ));+#3268 = CARTESIAN_POINT('',(0.511897143003,7.090533723785E-03,1.8000001)+ );+#3269 = VECTOR('',#3270,1.);+#3270 = DIRECTION('',(0.,0.,1.));+#3271 = DEFINITIONAL_REPRESENTATION('',(#3272),#3278);+#3272 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3273,#3274,#3275,#3276,#3277),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3273 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3274 = CARTESIAN_POINT('',(0.751249268537,-5.00001E-02));+#3275 = CARTESIAN_POINT('',(0.501423008157,-5.00001E-02));+#3276 = CARTESIAN_POINT('',(0.250874916571,-5.00001E-02));+#3277 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3278 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3279 = ORIENTED_EDGE('',*,*,#3280,.T.);+#3280 = EDGE_CURVE('',#3245,#3281,#3283,.T.);+#3281 = VERTEX_POINT('',#3282);+#3282 = CARTESIAN_POINT('',(0.610770696596,-0.145355941338,1.75));+#3283 = SURFACE_CURVE('',#3284,(#3293,#3305),.PCURVE_S1.);+#3284 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3285,#3286,#3287,#3288,#3289,+ #3290,#3291,#3292),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.329897524377,+ 1.),.UNSPECIFIED.);+#3285 = CARTESIAN_POINT('',(0.535729214686,-0.108623037463,1.75));+#3286 = CARTESIAN_POINT('',(0.539660306113,-0.114682116398,1.75));+#3287 = CARTESIAN_POINT('',(0.544089188735,-0.120076743648,1.75));+#3288 = CARTESIAN_POINT('',(0.549015950559,-0.124805092484,1.75));+#3289 = CARTESIAN_POINT('',(0.565456885104,-0.137116334625,1.75));+#3290 = CARTESIAN_POINT('',(0.578524867049,-0.142614523752,1.75));+#3291 = CARTESIAN_POINT('',(0.593636792702,-0.145355941338,1.75));+#3292 = CARTESIAN_POINT('',(0.610770696596,-0.145355941338,1.75));+#3293 = PCURVE('',#2438,#3294);+#3294 = DEFINITIONAL_REPRESENTATION('',(#3295),#3304);+#3295 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3296,#3297,#3298,#3299,#3300,+ #3301,#3302,#3303),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.329897524377,+ 1.),.UNSPECIFIED.);+#3296 = CARTESIAN_POINT('',(3.222993429002,-0.365151133943));+#3297 = CARTESIAN_POINT('',(3.230201377538,-0.364691356557));+#3298 = CARTESIAN_POINT('',(3.237173036237,-0.36502748069));+#3299 = CARTESIAN_POINT('',(3.243906991548,-0.366160666755));+#3300 = CARTESIAN_POINT('',(3.263595726697,-0.372010856493));+#3301 = CARTESIAN_POINT('',(3.275804378631,-0.379218564434));+#3302 = CARTESIAN_POINT('',(3.287019932996,-0.389711276553));+#3303 = CARTESIAN_POINT('',(3.297241608144,-0.403462204515));+#3304 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3305 = PCURVE('',#3306,#3313);+#3306 = SURFACE_OF_LINEAR_EXTRUSION('',#3307,#3311);+#3307 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3308,#3309,#3310),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3308 = CARTESIAN_POINT('',(0.610770696596,-0.145355941338,1.8000001));+#3309 = CARTESIAN_POINT('',(0.559561286369,-0.145355941338,1.8000001));+#3310 = CARTESIAN_POINT('',(0.535729214686,-0.108623037463,1.8000001));+#3311 = VECTOR('',#3312,1.);+#3312 = DIRECTION('',(0.,0.,1.));+#3313 = DEFINITIONAL_REPRESENTATION('',(#3314),#3323);+#3314 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3315,#3316,#3317,#3318,#3319,+ #3320,#3321,#3322),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.329897524377,+ 1.),.UNSPECIFIED.);+#3315 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3316 = CARTESIAN_POINT('',(0.917525184569,-5.00001E-02));+#3317 = CARTESIAN_POINT('',(0.835025277724,-5.00001E-02));+#3318 = CARTESIAN_POINT('',(0.752512713414,-5.00001E-02));+#3319 = CARTESIAN_POINT('',(0.502396518787,-5.00001E-02));+#3320 = CARTESIAN_POINT('',(0.33479228432,-5.00001E-02));+#3321 = CARTESIAN_POINT('',(0.167292532931,-5.00001E-02));+#3322 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3323 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3324 = ORIENTED_EDGE('',*,*,#3325,.T.);+#3325 = EDGE_CURVE('',#3281,#3326,#3328,.T.);+#3326 = VERTEX_POINT('',#3327);+#3327 = CARTESIAN_POINT('',(0.678327726242,-0.119160358414,1.75));+#3328 = SURFACE_CURVE('',#3329,(#3338,#3350),.PCURVE_S1.);+#3329 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3330,#3331,#3332,#3333,#3334,+ #3335,#3336,#3337),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.798067185419,+ 1.),.UNSPECIFIED.);+#3330 = CARTESIAN_POINT('',(0.610770696596,-0.145355941338,1.75));+#3331 = CARTESIAN_POINT('',(0.628122812924,-0.145355941338,1.75));+#3332 = CARTESIAN_POINT('',(0.643424681253,-0.142580683687,1.75));+#3333 = CARTESIAN_POINT('',(0.656660215717,-0.137018941289,1.75));+#3334 = CARTESIAN_POINT('',(0.670649196024,-0.126563114897,1.75));+#3335 = CARTESIAN_POINT('',(0.673341414611,-0.12427358368,1.75));+#3336 = CARTESIAN_POINT('',(0.675900936419,-0.121805957155,1.75));+#3337 = CARTESIAN_POINT('',(0.678327726242,-0.119160358414,1.75));+#3338 = PCURVE('',#2438,#3339);+#3339 = DEFINITIONAL_REPRESENTATION('',(#3340),#3349);+#3340 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3341,#3342,#3343,#3344,#3345,+ #3346,#3347,#3348),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.798067185419,+ 1.),.UNSPECIFIED.);+#3341 = CARTESIAN_POINT('',(3.297241608144,-0.403462204515));+#3342 = CARTESIAN_POINT('',(3.307593463584,-0.417388260309));+#3343 = CARTESIAN_POINT('',(3.314494888964,-0.431324527999));+#3344 = CARTESIAN_POINT('',(3.317927277461,-0.445264795581));+#3345 = CARTESIAN_POINT('',(3.317881374137,-0.462729438963));+#3346 = CARTESIAN_POINT('',(3.317650008593,-0.466255976089));+#3347 = CARTESIAN_POINT('',(3.317196547772,-0.469782263914));+#3348 = CARTESIAN_POINT('',(3.316521069459,-0.473308200754));+#3349 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3350 = PCURVE('',#3351,#3358);+#3351 = SURFACE_OF_LINEAR_EXTRUSION('',#3352,#3356);+#3352 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3353,#3354,#3355),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3353 = CARTESIAN_POINT('',(0.678327726242,-0.119160358414,1.8000001));+#3354 = CARTESIAN_POINT('',(0.654298695289,-0.145355941338,1.8000001));+#3355 = CARTESIAN_POINT('',(0.610770696596,-0.145355941338,1.8000001));+#3356 = VECTOR('',#3357,1.);+#3357 = DIRECTION('',(0.,0.,1.));+#3358 = DEFINITIONAL_REPRESENTATION('',(#3359),#3368);+#3359 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3360,#3361,#3362,#3363,#3364,+ #3365,#3366,#3367),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.798067185419,+ 1.),.UNSPECIFIED.);+#3360 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3361 = CARTESIAN_POINT('',(0.800678679833,-5.00001E-02));+#3362 = CARTESIAN_POINT('',(0.601178793104,-5.00001E-02));+#3363 = CARTESIAN_POINT('',(0.401589120071,-5.00001E-02));+#3364 = CARTESIAN_POINT('',(0.151498496478,-5.00001E-02));+#3365 = CARTESIAN_POINT('',(0.100997023381,-5.00001E-02));+#3366 = CARTESIAN_POINT('',(5.049703893862E-02,-5.00001E-02));+#3367 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3368 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3369 = ORIENTED_EDGE('',*,*,#3370,.T.);+#3370 = EDGE_CURVE('',#3326,#3371,#3373,.T.);+#3371 = VERTEX_POINT('',#3372);+#3372 = CARTESIAN_POINT('',(0.702356757195,-4.530063212418E-02,1.75));+#3373 = SURFACE_CURVE('',#3374,(#3380,#3389),.PCURVE_S1.);+#3374 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3375,#3376,#3377,#3378,#3379),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3375 = CARTESIAN_POINT('',(0.678327726242,-0.119160358414,1.75));+#3376 = CARTESIAN_POINT('',(0.69035015084,-0.106053944712,1.75));+#3377 = CARTESIAN_POINT('',(0.698362692684,-8.936443430104E-02,1.75));+#3378 = CARTESIAN_POINT('',(0.702356757195,-6.91006876225E-02,1.75));+#3379 = CARTESIAN_POINT('',(0.702356757195,-4.530063212418E-02,1.75));+#3380 = PCURVE('',#2438,#3381);+#3381 = DEFINITIONAL_REPRESENTATION('',(#3382),#3388);+#3382 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3383,#3384,#3385,#3386,#3387),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3383 = CARTESIAN_POINT('',(3.316521069459,-0.473308200754));+#3384 = CARTESIAN_POINT('',(3.31317471989,-0.490775848503));+#3385 = CARTESIAN_POINT('',(3.304560532694,-0.507162927667));+#3386 = CARTESIAN_POINT('',(3.290680491558,-0.522457254682));+#3387 = CARTESIAN_POINT('',(3.271579599509,-0.536655795617));+#3388 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3389 = PCURVE('',#3390,#3397);+#3390 = SURFACE_OF_LINEAR_EXTRUSION('',#3391,#3395);+#3391 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3392,#3393,#3394),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3392 = CARTESIAN_POINT('',(0.702356757195,-4.530063212418E-02,1.8000001+ ));+#3393 = CARTESIAN_POINT('',(0.702356757195,-9.296477548962E-02,1.8000001+ ));+#3394 = CARTESIAN_POINT('',(0.678327726242,-0.119160358414,1.8000001));+#3395 = VECTOR('',#3396,1.);+#3396 = DIRECTION('',(0.,0.,1.));+#3397 = DEFINITIONAL_REPRESENTATION('',(#3398),#3404);+#3398 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3399,#3400,#3401,#3402,#3403),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3399 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3400 = CARTESIAN_POINT('',(0.749835425705,-5.00001E-02));+#3401 = CARTESIAN_POINT('',(0.499665642625,-5.00001E-02));+#3402 = CARTESIAN_POINT('',(0.249664148119,-5.00001E-02));+#3403 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3404 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3405 = ORIENTED_EDGE('',*,*,#3406,.T.);+#3406 = EDGE_CURVE('',#3371,#3407,#3409,.T.);+#3407 = VERTEX_POINT('',#3408);+#3408 = CARTESIAN_POINT('',(0.679017083687,2.86575738003E-02,1.75));+#3409 = SURFACE_CURVE('',#3410,(#3416,#3425),.PCURVE_S1.);+#3410 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3411,#3412,#3413,#3414,#3415),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3411 = CARTESIAN_POINT('',(0.702356757195,-4.530063212418E-02,1.75));+#3412 = CARTESIAN_POINT('',(0.702356757195,-2.1403414262E-02,1.75));+#3413 = CARTESIAN_POINT('',(0.698477661913,-1.090547632337E-03,1.75));+#3414 = CARTESIAN_POINT('',(0.690695337621,1.559961054083E-02,1.75));+#3415 = CARTESIAN_POINT('',(0.679017083687,2.86575738003E-02,1.75));+#3416 = PCURVE('',#2438,#3417);+#3417 = DEFINITIONAL_REPRESENTATION('',(#3418),#3424);+#3418 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3419,#3420,#3421,#3422,#3423),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3419 = CARTESIAN_POINT('',(3.271579599509,-0.536655795617));+#3420 = CARTESIAN_POINT('',(3.252400729162,-0.550912301282));+#3421 = CARTESIAN_POINT('',(3.23378432863,-0.559917275582));+#3422 = CARTESIAN_POINT('',(3.215746784155,-0.563628466838));+#3423 = CARTESIAN_POINT('',(3.198300063783,-0.562046073811));+#3424 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3425 = PCURVE('',#3426,#3433);+#3426 = SURFACE_OF_LINEAR_EXTRUSION('',#3427,#3431);+#3427 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3428,#3429,#3430),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3428 = CARTESIAN_POINT('',(0.679017083687,2.86575738003E-02,1.8000001)+ );+#3429 = CARTESIAN_POINT('',(0.702356757195,2.560470511367E-03,1.8000001)+ );+#3430 = CARTESIAN_POINT('',(0.702356757195,-4.530063212418E-02,1.8000001+ ));+#3431 = VECTOR('',#3432,1.);+#3432 = DIRECTION('',(0.,0.,1.));+#3433 = DEFINITIONAL_REPRESENTATION('',(#3434),#3440);+#3434 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3435,#3436,#3437,#3438,#3439),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3435 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3436 = CARTESIAN_POINT('',(0.750348231171,-5.00001E-02));+#3437 = CARTESIAN_POINT('',(0.500353133442,-5.00001E-02));+#3438 = CARTESIAN_POINT('',(0.250180319151,-5.00001E-02));+#3439 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3440 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3441 = ORIENTED_EDGE('',*,*,#3442,.T.);+#3442 = EDGE_CURVE('',#3407,#3443,#3445,.T.);+#3443 = VERTEX_POINT('',#3444);+#3444 = CARTESIAN_POINT('',(0.613134207837,5.475467708923E-02,1.75));+#3445 = SURFACE_CURVE('',#3446,(#3455,#3467),.PCURVE_S1.);+#3446 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3447,#3448,#3449,#3450,#3451,+ #3452,#3453,#3454),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.221933091554,+ 1.),.UNSPECIFIED.);+#3447 = CARTESIAN_POINT('',(0.679017083687,2.86575738003E-02,1.75));+#3448 = CARTESIAN_POINT('',(0.67642655755,3.15541536588E-02,1.75));+#3449 = CARTESIAN_POINT('',(0.673678137583,3.423659997221E-02,1.75));+#3450 = CARTESIAN_POINT('',(0.670771863956,3.670474721311E-02,1.75));+#3451 = CARTESIAN_POINT('',(0.65696580196,4.685992863827E-02,1.75));+#3452 = CARTESIAN_POINT('',(0.644284857638,5.212642073353E-02,1.75));+#3453 = CARTESIAN_POINT('',(0.629669579357,5.475467708923E-02,1.75));+#3454 = CARTESIAN_POINT('',(0.613134207837,5.475467708923E-02,1.75));+#3455 = PCURVE('',#2438,#3456);+#3456 = DEFINITIONAL_REPRESENTATION('',(#3457),#3466);+#3457 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3458,#3459,#3460,#3461,#3462,+ #3463,#3464,#3465),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.221933091554,+ 1.),.UNSPECIFIED.);+#3458 = CARTESIAN_POINT('',(3.198300063783,-0.562046073811));+#3459 = CARTESIAN_POINT('',(3.194429948833,-0.561695059823));+#3460 = CARTESIAN_POINT('',(3.190637492514,-0.561089580171));+#3461 = CARTESIAN_POINT('',(3.186922851636,-0.560229568346));+#3462 = CARTESIAN_POINT('',(3.1705363789,-0.555207759021));+#3463 = CARTESIAN_POINT('',(3.158744574295,-0.548172445805));+#3464 = CARTESIAN_POINT('',(3.147916126106,-0.538010812054));+#3465 = CARTESIAN_POINT('',(3.138051520982,-0.524740240209));+#3466 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3467 = PCURVE('',#3468,#3475);+#3468 = SURFACE_OF_LINEAR_EXTRUSION('',#3469,#3473);+#3469 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3470,#3471,#3472),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3470 = CARTESIAN_POINT('',(0.613134207837,5.475467708923E-02,1.8000001)+ );+#3471 = CARTESIAN_POINT('',(0.65567741018,5.475467708923E-02,1.8000001)+ );+#3472 = CARTESIAN_POINT('',(0.679017083687,2.86575738003E-02,1.8000001)+ );+#3473 = VECTOR('',#3474,1.);+#3474 = DIRECTION('',(0.,0.,1.));+#3475 = DEFINITIONAL_REPRESENTATION('',(#3476),#3485);+#3476 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3477,#3478,#3479,#3480,#3481,+ #3482,#3483,#3484),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.221933091554,+ 1.),.UNSPECIFIED.);+#3477 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3478 = CARTESIAN_POINT('',(0.944503805146,-5.00001E-02));+#3479 = CARTESIAN_POINT('',(0.889003804014,-5.00001E-02));+#3480 = CARTESIAN_POINT('',(0.833501900238,-5.00001E-02));+#3481 = CARTESIAN_POINT('',(0.583417967961,-5.00001E-02));+#3482 = CARTESIAN_POINT('',(0.38883591195,-5.00001E-02));+#3483 = CARTESIAN_POINT('',(0.19433623481,-5.00001E-02));+#3484 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3485 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3486 = ORIENTED_EDGE('',*,*,#3487,.T.);+#3487 = EDGE_CURVE('',#3443,#3488,#3490,.T.);+#3488 = VERTEX_POINT('',#3489);+#3489 = CARTESIAN_POINT('',(0.574727150167,4.42173561386E-02,1.75));+#3490 = SURFACE_CURVE('',#3491,(#3497,#3506),.PCURVE_S1.);+#3491 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3492,#3493,#3494,#3495,#3496),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3492 = CARTESIAN_POINT('',(0.613134207837,5.475467708923E-02,1.75));+#3493 = CARTESIAN_POINT('',(0.602302779915,5.475467708923E-02,1.75));+#3494 = CARTESIAN_POINT('',(0.592290276018,5.299888886962E-02,1.75));+#3495 = CARTESIAN_POINT('',(0.583098194804,4.948619011585E-02,1.75));+#3496 = CARTESIAN_POINT('',(0.574727150167,4.42173561386E-02,1.75));+#3497 = PCURVE('',#2438,#3498);+#3498 = DEFINITIONAL_REPRESENTATION('',(#3499),#3505);+#3499 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3500,#3501,#3502,#3503,#3504),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3500 = CARTESIAN_POINT('',(3.138051520982,-0.524740240209));+#3501 = CARTESIAN_POINT('',(3.131589751482,-0.516047406048));+#3502 = CARTESIAN_POINT('',(3.127025651822,-0.506964343742));+#3503 = CARTESIAN_POINT('',(3.124361016788,-0.497491586502));+#3504 = CARTESIAN_POINT('',(3.123595590383,-0.487630089547));+#3505 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3506 = PCURVE('',#3507,#3514);+#3507 = SURFACE_OF_LINEAR_EXTRUSION('',#3508,#3512);+#3508 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3509,#3510,#3511),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3509 = CARTESIAN_POINT('',(0.574727150167,4.42173561386E-02,1.8000001)+ );+#3510 = CARTESIAN_POINT('',(0.591468688126,5.475467708923E-02,1.8000001)+ );+#3511 = CARTESIAN_POINT('',(0.613134207837,5.475467708923E-02,1.8000001)+ );+#3512 = VECTOR('',#3513,1.);+#3513 = DIRECTION('',(0.,0.,1.));+#3514 = DEFINITIONAL_REPRESENTATION('',(#3515),#3521);+#3515 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3516,#3517,#3518,#3519,#3520),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3516 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3517 = CARTESIAN_POINT('',(0.750030738554,-5.00001E-02));+#3518 = CARTESIAN_POINT('',(0.500025988463,-5.00001E-02));+#3519 = CARTESIAN_POINT('',(0.250008232734,-5.00001E-02));+#3520 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3521 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3522 = ORIENTED_EDGE('',*,*,#3523,.T.);+#3523 = EDGE_CURVE('',#3488,#3524,#3526,.T.);+#3524 = VERTEX_POINT('',#3525);+#3525 = CARTESIAN_POINT('',(0.548531567243,1.398410817746E-02,1.75));+#3526 = SURFACE_CURVE('',#3527,(#3533,#3542),.PCURVE_S1.);+#3527 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3528,#3529,#3530,#3531,#3532),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3528 = CARTESIAN_POINT('',(0.574727150167,4.42173561386E-02,1.75));+#3529 = CARTESIAN_POINT('',(0.566356044149,3.894848352736E-02,1.75));+#3530 = CARTESIAN_POINT('',(0.559199333894,3.215287463449E-02,1.75));+#3531 = CARTESIAN_POINT('',(0.553257968508,2.383077748001E-02,1.75));+#3532 = CARTESIAN_POINT('',(0.548531567243,1.398410817746E-02,1.75));+#3533 = PCURVE('',#2438,#3534);+#3534 = DEFINITIONAL_REPRESENTATION('',(#3535),#3541);+#3535 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3536,#3537,#3538,#3539,#3540),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3536 = CARTESIAN_POINT('',(3.123595590383,-0.487630089547));+#3537 = CARTESIAN_POINT('',(3.122830158365,-0.477768520281));+#3538 = CARTESIAN_POINT('',(3.124014497971,-0.46797075821));+#3539 = CARTESIAN_POINT('',(3.127148976365,-0.458237713008));+#3540 = CARTESIAN_POINT('',(3.132231828611,-0.448570222211));+#3541 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3542 = PCURVE('',#3543,#3550);+#3543 = SURFACE_OF_LINEAR_EXTRUSION('',#3544,#3548);+#3544 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3545,#3546,#3547),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3545 = CARTESIAN_POINT('',(0.548531567243,1.398410817746E-02,1.8000001)+ );+#3546 = CARTESIAN_POINT('',(0.557985612208,3.368003518798E-02,1.8000001)+ );+#3547 = CARTESIAN_POINT('',(0.574727150167,4.42173561386E-02,1.8000001)+ );+#3548 = VECTOR('',#3549,1.);+#3549 = DIRECTION('',(0.,0.,1.));+#3550 = DEFINITIONAL_REPRESENTATION('',(#3551),#3557);+#3551 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3552,#3553,#3554,#3555,#3556),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3552 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3553 = CARTESIAN_POINT('',(0.749989934067,-5.00001E-02));+#3554 = CARTESIAN_POINT('',(0.499971377856,-5.00001E-02));+#3555 = CARTESIAN_POINT('',(0.249967145423,-5.00001E-02));+#3556 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3557 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3558 = ORIENTED_EDGE('',*,*,#3559,.T.);+#3559 = EDGE_CURVE('',#3524,#3560,#3562,.T.);+#3560 = VERTEX_POINT('',#3561);+#3561 = CARTESIAN_POINT('',(0.568030534983,9.77902776072E-02,1.75));+#3562 = SURFACE_CURVE('',#3563,(#3569,#3578),.PCURVE_S1.);+#3563 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3564,#3565,#3566,#3567,#3568),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3564 = CARTESIAN_POINT('',(0.548531567243,1.398410817746E-02,1.75));+#3565 = CARTESIAN_POINT('',(0.548531567243,4.159554367571E-02,1.75));+#3566 = CARTESIAN_POINT('',(0.551766970078,6.480007073583E-02,1.75));+#3567 = CARTESIAN_POINT('',(0.558266463459,8.353867826102E-02,1.75));+#3568 = CARTESIAN_POINT('',(0.568030534983,9.77902776072E-02,1.75));+#3569 = PCURVE('',#2438,#3570);+#3570 = DEFINITIONAL_REPRESENTATION('',(#3571),#3577);+#3571 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3572,#3573,#3574,#3575,#3576),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3572 = CARTESIAN_POINT('',(3.132231828611,-0.448570222211));+#3573 = CARTESIAN_POINT('',(3.11007208832,-0.465042540825));+#3574 = CARTESIAN_POINT('',(3.09337930511,-0.481482397767));+#3575 = CARTESIAN_POINT('',(3.082217953126,-0.497877611949));+#3576 = CARTESIAN_POINT('',(3.076605248088,-0.514215993718));+#3577 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3578 = PCURVE('',#3579,#3586);+#3579 = SURFACE_OF_LINEAR_EXTRUSION('',#3580,#3584);+#3580 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3581,#3582,#3583),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3581 = CARTESIAN_POINT('',(0.568030534983,9.77902776072E-02,1.8000001)+ );+#3582 = CARTESIAN_POINT('',(0.548531567243,6.932966307701E-02,1.8000001)+ );+#3583 = CARTESIAN_POINT('',(0.548531567243,1.398410817746E-02,1.8000001)+ );+#3584 = VECTOR('',#3585,1.);+#3585 = DIRECTION('',(0.,0.,1.));+#3586 = DEFINITIONAL_REPRESENTATION('',(#3587),#3593);+#3587 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3588,#3589,#3590,#3591,#3592),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3588 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3589 = CARTESIAN_POINT('',(0.750554172342,-5.00001E-02));+#3590 = CARTESIAN_POINT('',(0.500620267783,-5.00001E-02));+#3591 = CARTESIAN_POINT('',(0.250374062216,-5.00001E-02));+#3592 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3593 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3594 = ORIENTED_EDGE('',*,*,#3595,.T.);+#3595 = EDGE_CURVE('',#3560,#3596,#3598,.T.);+#3596 = VERTEX_POINT('',#3597);+#3597 = CARTESIAN_POINT('',(0.625345682584,0.126250892137,1.75));+#3598 = SURFACE_CURVE('',#3599,(#3608,#3620),.PCURVE_S1.);+#3599 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3600,#3601,#3602,#3603,#3604,+ #3605,#3606,#3607),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.39396224064,+ 1.),.UNSPECIFIED.);+#3600 = CARTESIAN_POINT('',(0.568030534983,9.77902776072E-02,1.75));+#3601 = CARTESIAN_POINT('',(0.571870920489,0.103395688774,1.75));+#3602 = CARTESIAN_POINT('',(0.57618590542,0.108266424367,1.75));+#3603 = CARTESIAN_POINT('',(0.580975542752,0.112401039695,1.75));+#3604 = CARTESIAN_POINT('',(0.59433639059,0.121026460749,1.75));+#3605 = CARTESIAN_POINT('',(0.603555326227,0.124510870242,1.75));+#3606 = CARTESIAN_POINT('',(0.61389375223,0.126250892137,1.75));+#3607 = CARTESIAN_POINT('',(0.625345682584,0.126250892137,1.75));+#3608 = PCURVE('',#2438,#3609);+#3609 = DEFINITIONAL_REPRESENTATION('',(#3610),#3619);+#3610 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3611,#3612,#3613,#3614,#3615,+ #3616,#3617,#3618),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.39396224064,+ 1.),.UNSPECIFIED.);+#3611 = CARTESIAN_POINT('',(3.076605248088,-0.514215993718));+#3612 = CARTESIAN_POINT('',(3.074397669925,-0.520642174064));+#3613 = CARTESIAN_POINT('',(3.073062845114,-0.527010957535));+#3614 = CARTESIAN_POINT('',(3.072601964705,-0.533321524778));+#3615 = CARTESIAN_POINT('',(3.073650336568,-0.54919008047));+#3616 = CARTESIAN_POINT('',(3.076353696039,-0.558667513211));+#3617 = CARTESIAN_POINT('',(3.081124886359,-0.56800274065));+#3618 = CARTESIAN_POINT('',(3.087956832693,-0.577193563144));+#3619 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3620 = PCURVE('',#3621,#3628);+#3621 = SURFACE_OF_LINEAR_EXTRUSION('',#3622,#3626);+#3622 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3623,#3624,#3625),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3623 = CARTESIAN_POINT('',(0.625345682584,0.126250892137,1.8000001));+#3624 = CARTESIAN_POINT('',(0.587529502724,0.126250892137,1.8000001));+#3625 = CARTESIAN_POINT('',(0.568030534983,9.77902776072E-02,1.8000001)+ );+#3626 = VECTOR('',#3627,1.);+#3627 = DIRECTION('',(0.,0.,1.));+#3628 = DEFINITIONAL_REPRESENTATION('',(#3629),#3638);+#3629 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3630,#3631,#3632,#3633,#3634,+ #3635,#3636,#3637),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.39396224064,+ 1.),.UNSPECIFIED.);+#3630 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3631 = CARTESIAN_POINT('',(0.901523363784,-5.00001E-02));+#3632 = CARTESIAN_POINT('',(0.803023414226,-5.00001E-02));+#3633 = CARTESIAN_POINT('',(0.704511744594,-5.00001E-02));+#3634 = CARTESIAN_POINT('',(0.454457971842,-5.00001E-02));+#3635 = CARTESIAN_POINT('',(0.302915737726,-5.00001E-02));+#3636 = CARTESIAN_POINT('',(0.151415748447,-5.00001E-02));+#3637 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3638 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3639 = ORIENTED_EDGE('',*,*,#3640,.T.);+#3640 = EDGE_CURVE('',#3596,#3027,#3641,.T.);+#3641 = SURFACE_CURVE('',#3642,(#3648,#3657),.PCURVE_S1.);+#3642 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3643,#3644,#3645,#3646,#3647),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3643 = CARTESIAN_POINT('',(0.625345682584,0.126250892137,1.75));+#3644 = CARTESIAN_POINT('',(0.632928424477,0.126250892137,1.75));+#3645 = CARTESIAN_POINT('',(0.640314398002,0.125610806589,1.75));+#3646 = CARTESIAN_POINT('',(0.647503500468,0.124330566719,1.75));+#3647 = CARTESIAN_POINT('',(0.654495654559,0.12241018637,1.75));+#3648 = PCURVE('',#2438,#3649);+#3649 = DEFINITIONAL_REPRESENTATION('',(#3650),#3656);+#3650 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3651,#3652,#3653,#3654,#3655),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3651 = CARTESIAN_POINT('',(3.087956832693,-0.577193563144));+#3652 = CARTESIAN_POINT('',(3.092480514211,-0.583279142833));+#3653 = CARTESIAN_POINT('',(3.097400513343,-0.588824945116));+#3654 = CARTESIAN_POINT('',(3.102716824021,-0.593830846549));+#3655 = CARTESIAN_POINT('',(3.108429389012,-0.598296793341));+#3656 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3657 = PCURVE('',#3658,#3665);+#3658 = SURFACE_OF_LINEAR_EXTRUSION('',#3659,#3663);+#3659 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3660,#3661,#3662),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3660 = CARTESIAN_POINT('',(0.654495654559,0.12241018637,1.8000001));+#3661 = CARTESIAN_POINT('',(0.640511546382,0.126250892137,1.8000001));+#3662 = CARTESIAN_POINT('',(0.625345682584,0.126250892137,1.8000001));+#3663 = VECTOR('',#3664,1.);+#3664 = DIRECTION('',(0.,0.,1.));+#3665 = DEFINITIONAL_REPRESENTATION('',(#3666),#3672);+#3666 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3667,#3668,#3669,#3670,#3671),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3667 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3668 = CARTESIAN_POINT('',(0.75000626425,-5.00001E-02));+#3669 = CARTESIAN_POINT('',(0.500006560129,-5.00001E-02));+#3670 = CARTESIAN_POINT('',(0.250003575581,-5.00001E-02));+#3671 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3672 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3673 = FACE_BOUND('',#3674,.F.);+#3674 = EDGE_LOOP('',(#3675,#3704,#3731,#3758,#3785,#3812,#3839));+#3675 = ORIENTED_EDGE('',*,*,#3676,.T.);+#3676 = EDGE_CURVE('',#3677,#3679,#3681,.T.);+#3677 = VERTEX_POINT('',#3678);+#3678 = CARTESIAN_POINT('',(0.455369832483,0.154416067762,1.75));+#3679 = VERTEX_POINT('',#3680);+#3680 = CARTESIAN_POINT('',(0.270228118584,0.154416067762,1.75));+#3681 = SURFACE_CURVE('',#3682,(#3686,#3693),.PCURVE_S1.);+#3682 = LINE('',#3683,#3684);+#3683 = CARTESIAN_POINT('',(-0.704928760899,0.154416067762,1.75));+#3684 = VECTOR('',#3685,1.);+#3685 = DIRECTION('',(-1.,-0.,-0.));+#3686 = PCURVE('',#2438,#3687);+#3687 = DEFINITIONAL_REPRESENTATION('',(#3688),#3692);+#3688 = LINE('',#3689,#3690);+#3689 = CARTESIAN_POINT('',(2.271742932662,0.473624328546));+#3690 = VECTOR('',#3691,1.);+#3691 = DIRECTION('',(-0.596575959062,0.802556617983));+#3692 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3693 = PCURVE('',#3694,#3699);+#3694 = PLANE('',#3695);+#3695 = AXIS2_PLACEMENT_3D('',#3696,#3697,#3698);+#3696 = CARTESIAN_POINT('',(0.270228118584,0.154416067762,1.8000001));+#3697 = DIRECTION('',(0.,-1.,0.));+#3698 = DIRECTION('',(1.,0.,0.));+#3699 = DEFINITIONAL_REPRESENTATION('',(#3700),#3703);+#3700 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3701,#3702),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-1.160298593382,-0.975156879483),.PIECEWISE_BEZIER_KNOTS.);+#3701 = CARTESIAN_POINT('',(0.185141713899,-5.00001E-02));+#3702 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3703 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3704 = ORIENTED_EDGE('',*,*,#3705,.T.);+#3705 = EDGE_CURVE('',#3679,#3706,#3708,.T.);+#3706 = VERTEX_POINT('',#3707);+#3707 = CARTESIAN_POINT('',(0.270228118584,0.120932991845,1.75));+#3708 = SURFACE_CURVE('',#3709,(#3713,#3720),.PCURVE_S1.);+#3709 = LINE('',#3710,#3711);+#3710 = CARTESIAN_POINT('',(0.270228118584,1.190552136305,1.75));+#3711 = VECTOR('',#3712,1.);+#3712 = DIRECTION('',(0.,-1.,0.));+#3713 = PCURVE('',#2438,#3714);+#3714 = DEFINITIONAL_REPRESENTATION('',(#3715),#3719);+#3715 = LINE('',#3716,#3717);+#3716 = CARTESIAN_POINT('',(2.021940224336,-0.927128147465));+#3717 = VECTOR('',#3718,1.);+#3718 = DIRECTION('',(0.802556617983,0.596575959062));+#3719 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3720 = PCURVE('',#3721,#3726);+#3721 = PLANE('',#3722);+#3722 = AXIS2_PLACEMENT_3D('',#3723,#3724,#3725);+#3723 = CARTESIAN_POINT('',(0.270228118584,0.120932991845,1.8000001));+#3724 = DIRECTION('',(1.,0.,0.));+#3725 = DIRECTION('',(0.,1.,0.));+#3726 = DEFINITIONAL_REPRESENTATION('',(#3727),#3730);+#3727 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3728,#3729),.UNSPECIFIED.,.F.,+ .F.,(2,2),(1.036136068542,1.06961914446),.PIECEWISE_BEZIER_KNOTS.);+#3728 = CARTESIAN_POINT('',(3.348307591787E-02,-5.00001E-02));+#3729 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3730 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3731 = ORIENTED_EDGE('',*,*,#3732,.T.);+#3732 = EDGE_CURVE('',#3706,#3733,#3735,.T.);+#3733 = VERTEX_POINT('',#3734);+#3734 = CARTESIAN_POINT('',(0.411053996709,0.120932991845,1.75));+#3735 = SURFACE_CURVE('',#3736,(#3740,#3747),.PCURVE_S1.);+#3736 = LINE('',#3737,#3738);+#3737 = CARTESIAN_POINT('',(-0.634515821836,0.120932991845,1.75));+#3738 = VECTOR('',#3739,1.);+#3739 = DIRECTION('',(1.,-0.,0.));+#3740 = PCURVE('',#2438,#3741);+#3741 = DEFINITIONAL_REPRESENTATION('',(#3742),#3746);+#3742 = LINE('',#3743,#3744);+#3743 = CARTESIAN_POINT('',(2.340621663482,0.437089156438));+#3744 = VECTOR('',#3745,1.);+#3745 = DIRECTION('',(0.596575959062,-0.802556617983));+#3746 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3747 = PCURVE('',#3748,#3753);+#3748 = PLANE('',#3749);+#3749 = AXIS2_PLACEMENT_3D('',#3750,#3751,#3752);+#3750 = CARTESIAN_POINT('',(0.411053996709,0.120932991845,1.8000001));+#3751 = DIRECTION('',(0.,1.,0.));+#3752 = DIRECTION('',(-1.,0.,0.));+#3753 = DEFINITIONAL_REPRESENTATION('',(#3754),#3757);+#3754 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3755,#3756),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.904743940421,1.045569818546),.PIECEWISE_BEZIER_KNOTS.);+#3755 = CARTESIAN_POINT('',(0.140825878125,-5.00001E-02));+#3756 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3757 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3758 = ORIENTED_EDGE('',*,*,#3759,.T.);+#3759 = EDGE_CURVE('',#3733,#3760,#3762,.T.);+#3760 = VERTEX_POINT('',#3761);+#3761 = CARTESIAN_POINT('',(0.308635176255,-0.139644122505,1.75));+#3762 = SURFACE_CURVE('',#3763,(#3767,#3774),.PCURVE_S1.);+#3763 = LINE('',#3764,#3765);+#3764 = CARTESIAN_POINT('',(0.584086980038,0.561168832121,1.75));+#3765 = VECTOR('',#3766,1.);+#3766 = DIRECTION('',(-0.365804721382,-0.93069162767,-0.));+#3767 = PCURVE('',#2438,#3768);+#3768 = DEFINITIONAL_REPRESENTATION('',(#3769),#3773);+#3769 = LINE('',#3770,#3771);+#3770 = CARTESIAN_POINT('',(2.714296611639,-0.803542705526));+#3771 = VECTOR('',#3772,1.);+#3772 = DIRECTION('',(0.5287024226,0.848807250403));+#3773 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3774 = PCURVE('',#3775,#3780);+#3775 = PLANE('',#3776);+#3776 = AXIS2_PLACEMENT_3D('',#3777,#3778,#3779);+#3777 = CARTESIAN_POINT('',(0.308635176255,-0.139644122505,1.8000001));+#3778 = DIRECTION('',(0.93069162767,-0.365804721382,0.));+#3779 = DIRECTION('',(0.365804721382,0.93069162767,0.));+#3780 = DEFINITIONAL_REPRESENTATION('',(#3781),#3784);+#3781 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3782,#3783),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.473020093002,0.75300231977),.PIECEWISE_BEZIER_KNOTS.);+#3782 = CARTESIAN_POINT('',(0.279982226768,-5.00001E-02));+#3783 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3784 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3785 = ORIENTED_EDGE('',*,*,#3786,.T.);+#3786 = EDGE_CURVE('',#3760,#3787,#3789,.T.);+#3787 = VERTEX_POINT('',#3788);+#3788 = CARTESIAN_POINT('',(0.350193582247,-0.139644122505,1.75));+#3789 = SURFACE_CURVE('',#3790,(#3794,#3801),.PCURVE_S1.);+#3790 = LINE('',#3791,#3792);+#3791 = CARTESIAN_POINT('',(-0.664946029068,-0.139644122505,1.75));+#3792 = VECTOR('',#3793,1.);+#3793 = DIRECTION('',(1.,-0.,0.));+#3794 = PCURVE('',#2438,#3795);+#3795 = DEFINITIONAL_REPRESENTATION('',(#3796),#3800);+#3796 = LINE('',#3797,#3798);+#3797 = CARTESIAN_POINT('',(2.531595621034,0.61696516254));+#3798 = VECTOR('',#3799,1.);+#3799 = DIRECTION('',(0.596575959062,-0.802556617983));+#3800 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3801 = PCURVE('',#3802,#3807);+#3802 = PLANE('',#3803);+#3803 = AXIS2_PLACEMENT_3D('',#3804,#3805,#3806);+#3804 = CARTESIAN_POINT('',(0.350193582247,-0.139644122505,1.8000001));+#3805 = DIRECTION('',(0.,1.,0.));+#3806 = DIRECTION('',(-1.,0.,0.));+#3807 = DEFINITIONAL_REPRESENTATION('',(#3808),#3811);+#3808 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3809,#3810),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.973581205322,1.015139611314),.PIECEWISE_BEZIER_KNOTS.);+#3809 = CARTESIAN_POINT('',(4.155840599218E-02,-5.00001E-02));+#3810 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3811 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3812 = ORIENTED_EDGE('',*,*,#3813,.T.);+#3813 = EDGE_CURVE('',#3787,#3814,#3816,.T.);+#3814 = VERTEX_POINT('',#3815);+#3815 = CARTESIAN_POINT('',(0.455369832483,0.137477570533,1.75));+#3816 = SURFACE_CURVE('',#3817,(#3821,#3828),.PCURVE_S1.);+#3817 = LINE('',#3818,#3819);+#3818 = CARTESIAN_POINT('',(0.673031508883,0.710979403295,1.75));+#3819 = VECTOR('',#3820,1.);+#3820 = DIRECTION('',(0.354834508557,0.934929126478,0.));+#3821 = PCURVE('',#2438,#3822);+#3822 = DEFINITIONAL_REPRESENTATION('',(#3823),#3827);+#3823 = LINE('',#3824,#3825);+#3824 = CARTESIAN_POINT('',(2.647127313898,-0.96429911096));+#3825 = VECTOR('',#3826,1.);+#3826 = DIRECTION('',(-0.53864782055,-0.842531023415));+#3827 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3828 = PCURVE('',#3829,#3834);+#3829 = PLANE('',#3830);+#3830 = AXIS2_PLACEMENT_3D('',#3831,#3832,#3833);+#3831 = CARTESIAN_POINT('',(0.455369832483,0.137477570533,1.8000001));+#3832 = DIRECTION('',(-0.934929126478,0.354834508557,0.));+#3833 = DIRECTION('',(-0.354834508557,-0.934929126478,0.));+#3834 = DEFINITIONAL_REPRESENTATION('',(#3835),#3838);+#3835 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3836,#3837),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.909826746979,-0.613417441514),.PIECEWISE_BEZIER_KNOTS.);+#3836 = CARTESIAN_POINT('',(0.296409305464,-5.00001E-02));+#3837 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3838 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3839 = ORIENTED_EDGE('',*,*,#3840,.T.);+#3840 = EDGE_CURVE('',#3814,#3677,#3841,.T.);+#3841 = SURFACE_CURVE('',#3842,(#3846,#3853),.PCURVE_S1.);+#3842 = LINE('',#3843,#3844);+#3843 = CARTESIAN_POINT('',(0.455369832483,1.207293674264,1.75));+#3844 = VECTOR('',#3845,1.);+#3845 = DIRECTION('',(0.,1.,0.));+#3846 = PCURVE('',#2438,#3847);+#3847 = DEFINITIONAL_REPRESENTATION('',(#3848),#3852);+#3848 = LINE('',#3849,#3850);+#3849 = CARTESIAN_POINT('',(2.118955287783,-1.085702454283));+#3850 = VECTOR('',#3851,1.);+#3851 = DIRECTION('',(-0.802556617983,-0.596575959062));+#3852 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3853 = PCURVE('',#3854,#3859);+#3854 = PLANE('',#3855);+#3855 = AXIS2_PLACEMENT_3D('',#3856,#3857,#3858);+#3856 = CARTESIAN_POINT('',(0.455369832483,0.154416067762,1.8000001));+#3857 = DIRECTION('',(-1.,0.,0.));+#3858 = DIRECTION('',(0.,-1.,0.));+#3859 = DEFINITIONAL_REPRESENTATION('',(#3860),#3863);+#3860 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3861,#3862),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-1.06981610373,-1.052877606501),.PIECEWISE_BEZIER_KNOTS.);+#3861 = CARTESIAN_POINT('',(1.693849722904E-02,-5.00001E-02));+#3862 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3863 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3864 = FACE_BOUND('',#3865,.F.);+#3865 = EDGE_LOOP('',(#3866,#3895,#3922,#3949,#3976,#4003,#4030,#4057,+ #4084,#4111,#4138));+#3866 = ORIENTED_EDGE('',*,*,#3867,.T.);+#3867 = EDGE_CURVE('',#3868,#3870,#3872,.T.);+#3868 = VERTEX_POINT('',#3869);+#3869 = CARTESIAN_POINT('',(0.115024213741,-0.106161046587,1.75));+#3870 = VERTEX_POINT('',#3871);+#3871 = CARTESIAN_POINT('',(5.317900292839E-02,-0.106161046587,1.75));+#3872 = SURFACE_CURVE('',#3873,(#3877,#3884),.PCURVE_S1.);+#3873 = LINE('',#3874,#3875);+#3874 = CARTESIAN_POINT('',(-0.813453318727,-0.106161046587,1.75));+#3875 = VECTOR('',#3876,1.);+#3876 = DIRECTION('',(-1.,-0.,-0.));+#3877 = PCURVE('',#2438,#3878);+#3878 = DEFINITIONAL_REPRESENTATION('',(#3879),#3883);+#3879 = LINE('',#3880,#3881);+#3880 = CARTESIAN_POINT('',(2.41612767811,0.716175472547));+#3881 = VECTOR('',#3882,1.);+#3882 = DIRECTION('',(-0.596575959062,0.802556617983));+#3883 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3884 = PCURVE('',#3885,#3890);+#3885 = PLANE('',#3886);+#3886 = AXIS2_PLACEMENT_3D('',#3887,#3888,#3889);+#3887 = CARTESIAN_POINT('',(5.317900292839E-02,-0.106161046587,1.8000001+ ));+#3888 = DIRECTION('',(0.,-1.,0.));+#3889 = DIRECTION('',(1.,0.,0.));+#3890 = DEFINITIONAL_REPRESENTATION('',(#3891),#3894);+#3891 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3892,#3893),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.928477532468,-0.866632321655),.PIECEWISE_BEZIER_KNOTS.);+#3892 = CARTESIAN_POINT('',(6.184521081301E-02,-5.00001E-02));+#3893 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3894 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3895 = ORIENTED_EDGE('',*,*,#3896,.T.);+#3896 = EDGE_CURVE('',#3870,#3897,#3899,.T.);+#3897 = VERTEX_POINT('',#3898);+#3898 = CARTESIAN_POINT('',(5.317900292839E-02,-0.139644122505,1.75));+#3899 = SURFACE_CURVE('',#3900,(#3904,#3911),.PCURVE_S1.);+#3900 = LINE('',#3901,#3902);+#3901 = CARTESIAN_POINT('',(5.317900292839E-02,1.06026357913,1.75));+#3902 = VECTOR('',#3903,1.);+#3903 = DIRECTION('',(0.,-1.,0.));+#3904 = PCURVE('',#2438,#3905);+#3905 = DEFINITIONAL_REPRESENTATION('',(#3906),#3910);+#3906 = LINE('',#3907,#3908);+#3907 = CARTESIAN_POINT('',(1.997017883808,-0.675206922316));+#3908 = VECTOR('',#3909,1.);+#3909 = DIRECTION('',(0.802556617983,0.596575959062));+#3910 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3911 = PCURVE('',#3912,#3917);+#3912 = PLANE('',#3913);+#3913 = AXIS2_PLACEMENT_3D('',#3914,#3915,#3916);+#3914 = CARTESIAN_POINT('',(5.317900292839E-02,-0.139644122505,1.8000001+ ));+#3915 = DIRECTION('',(1.,0.,0.));+#3916 = DIRECTION('',(0.,1.,0.));+#3917 = DEFINITIONAL_REPRESENTATION('',(#3918),#3921);+#3918 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3919,#3920),.UNSPECIFIED.,.F.,+ .F.,(2,2),(1.166424625717,1.199907701635),.PIECEWISE_BEZIER_KNOTS.);+#3919 = CARTESIAN_POINT('',(3.348307591787E-02,-5.00001E-02));+#3920 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3921 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3922 = ORIENTED_EDGE('',*,*,#3923,.T.);+#3923 = EDGE_CURVE('',#3897,#3924,#3926,.T.);+#3924 = VERTEX_POINT('',#3925);+#3925 = CARTESIAN_POINT('',(0.215473441495,-0.139644122505,1.75));+#3926 = SURFACE_CURVE('',#3927,(#3931,#3938),.PCURVE_S1.);+#3927 = LINE('',#3928,#3929);+#3928 = CARTESIAN_POINT('',(-0.732306099443,-0.139644122505,1.75));+#3929 = VECTOR('',#3930,1.);+#3930 = DIRECTION('',(1.,-0.,0.));+#3931 = PCURVE('',#2438,#3932);+#3932 = DEFINITIONAL_REPRESENTATION('',(#3933),#3937);+#3933 = LINE('',#3934,#3935);+#3934 = CARTESIAN_POINT('',(2.491410222447,0.671025432809));+#3935 = VECTOR('',#3936,1.);+#3936 = DIRECTION('',(0.596575959062,-0.802556617983));+#3937 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3938 = PCURVE('',#3939,#3944);+#3939 = PLANE('',#3940);+#3940 = AXIS2_PLACEMENT_3D('',#3941,#3942,#3943);+#3941 = CARTESIAN_POINT('',(0.215473441495,-0.139644122505,1.8000001));+#3942 = DIRECTION('',(0.,1.,0.));+#3943 = DIRECTION('',(-1.,0.,0.));+#3944 = DEFINITIONAL_REPRESENTATION('',(#3945),#3948);+#3945 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3946,#3947),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.785485102372,0.947779540939),.PIECEWISE_BEZIER_KNOTS.);+#3946 = CARTESIAN_POINT('',(0.162294438567,-5.00001E-02));+#3947 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3948 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3949 = ORIENTED_EDGE('',*,*,#3950,.T.);+#3950 = EDGE_CURVE('',#3924,#3951,#3953,.T.);+#3951 = VERTEX_POINT('',#3952);+#3952 = CARTESIAN_POINT('',(0.215473441495,-0.106161046587,1.75));+#3953 = SURFACE_CURVE('',#3954,(#3958,#3965),.PCURVE_S1.);+#3954 = LINE('',#3955,#3956);+#3955 = CARTESIAN_POINT('',(0.215473441495,1.077005117089,1.75));+#3956 = VECTOR('',#3957,1.);+#3957 = DIRECTION('',(0.,1.,0.));+#3958 = PCURVE('',#2438,#3959);+#3959 = DEFINITIONAL_REPRESENTATION('',(#3960),#3964);+#3960 = LINE('',#3961,#3962);+#3961 = CARTESIAN_POINT('',(2.080402812062,-0.815444997114));+#3962 = VECTOR('',#3963,1.);+#3963 = DIRECTION('',(-0.802556617983,-0.596575959062));+#3964 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3965 = PCURVE('',#3966,#3971);+#3966 = PLANE('',#3967);+#3967 = AXIS2_PLACEMENT_3D('',#3968,#3969,#3970);+#3968 = CARTESIAN_POINT('',(0.215473441495,-0.106161046587,1.8000001));+#3969 = DIRECTION('',(-1.,0.,0.));+#3970 = DIRECTION('',(0.,-1.,0.));+#3971 = DEFINITIONAL_REPRESENTATION('',(#3972),#3975);+#3972 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3973,#3974),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-1.216649239594,-1.183166163676),.PIECEWISE_BEZIER_KNOTS.);+#3973 = CARTESIAN_POINT('',(3.348307591787E-02,-5.00001E-02));+#3974 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3975 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3976 = ORIENTED_EDGE('',*,*,#3977,.T.);+#3977 = EDGE_CURVE('',#3951,#3978,#3980,.T.);+#3978 = VERTEX_POINT('',#3979);+#3979 = CARTESIAN_POINT('',(0.154416067762,-0.106161046587,1.75));+#3980 = SURFACE_CURVE('',#3981,(#3985,#3992),.PCURVE_S1.);+#3981 = LINE('',#3982,#3983);+#3982 = CARTESIAN_POINT('',(-0.76283478631,-0.106161046587,1.75));+#3983 = VECTOR('',#3984,1.);+#3984 = DIRECTION('',(-1.,-0.,-0.));+#3985 = PCURVE('',#2438,#3986);+#3986 = DEFINITIONAL_REPRESENTATION('',(#3987),#3991);+#3987 = LINE('',#3988,#3989);+#3988 = CARTESIAN_POINT('',(2.446325477633,0.675551234363));+#3989 = VECTOR('',#3990,1.);+#3990 = DIRECTION('',(-0.596575959062,0.802556617983));+#3991 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3992 = PCURVE('',#3993,#3998);+#3993 = PLANE('',#3994);+#3994 = AXIS2_PLACEMENT_3D('',#3995,#3996,#3997);+#3995 = CARTESIAN_POINT('',(0.154416067762,-0.106161046587,1.8000001));+#3996 = DIRECTION('',(0.,-1.,0.));+#3997 = DIRECTION('',(1.,0.,0.));+#3998 = DEFINITIONAL_REPRESENTATION('',(#3999),#4002);+#3999 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4000,#4001),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.978308227805,-0.917250854072),.PIECEWISE_BEZIER_KNOTS.);+#4000 = CARTESIAN_POINT('',(6.105737373259E-02,-5.00001E-02));+#4001 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4002 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4003 = ORIENTED_EDGE('',*,*,#4004,.T.);+#4004 = EDGE_CURVE('',#3978,#4005,#4007,.T.);+#4005 = VERTEX_POINT('',#4006);+#4006 = CARTESIAN_POINT('',(0.154416067762,0.154416067762,1.75));+#4007 = SURFACE_CURVE('',#4008,(#4012,#4019),.PCURVE_S1.);+#4008 = LINE('',#4009,#4010);+#4009 = CARTESIAN_POINT('',(0.154416067762,1.207293674264,1.75));+#4010 = VECTOR('',#4011,1.);+#4011 = DIRECTION('',(0.,1.,0.));+#4012 = PCURVE('',#2438,#4013);+#4013 = DEFINITIONAL_REPRESENTATION('',(#4014),#4018);+#4014 = LINE('',#4015,#4016);+#4015 = CARTESIAN_POINT('',(1.939413506962,-0.844170018699));+#4016 = VECTOR('',#4017,1.);+#4017 = DIRECTION('',(-0.802556617983,-0.596575959062));+#4018 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4019 = PCURVE('',#4020,#4025);+#4020 = PLANE('',#4021);+#4021 = AXIS2_PLACEMENT_3D('',#4022,#4023,#4024);+#4022 = CARTESIAN_POINT('',(0.154416067762,0.154416067762,1.8000001));+#4023 = DIRECTION('',(-1.,0.,0.));+#4024 = DIRECTION('',(0.,-1.,0.));+#4025 = DEFINITIONAL_REPRESENTATION('',(#4026),#4029);+#4026 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4027,#4028),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-1.31345472085,-1.052877606501),.PIECEWISE_BEZIER_KNOTS.);+#4027 = CARTESIAN_POINT('',(0.260577114349,-5.00001E-02));+#4028 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4029 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4030 = ORIENTED_EDGE('',*,*,#4031,.T.);+#4031 = EDGE_CURVE('',#4005,#4032,#4034,.T.);+#4032 = VERTEX_POINT('',#4033);+#4033 = CARTESIAN_POINT('',(0.114630295201,0.154416067762,1.75));+#4034 = SURFACE_CURVE('',#4035,(#4039,#4046),.PCURVE_S1.);+#4035 = LINE('',#4036,#4037);+#4036 = CARTESIAN_POINT('',(-0.78272767259,0.154416067762,1.75));+#4037 = VECTOR('',#4038,1.);+#4038 = DIRECTION('',(-1.,-0.,-0.));+#4039 = PCURVE('',#2438,#4040);+#4040 = DEFINITIONAL_REPRESENTATION('',(#4041),#4045);+#4041 = LINE('',#4042,#4043);+#4042 = CARTESIAN_POINT('',(2.225329972306,0.536062359996));+#4043 = VECTOR('',#4044,1.);+#4044 = DIRECTION('',(-0.596575959062,0.802556617983));+#4045 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4046 = PCURVE('',#4047,#4052);+#4047 = PLANE('',#4048);+#4048 = AXIS2_PLACEMENT_3D('',#4049,#4050,#4051);+#4049 = CARTESIAN_POINT('',(0.114630295201,0.154416067762,1.8000001));+#4050 = DIRECTION('',(0.,-1.,0.));+#4051 = DIRECTION('',(1.,0.,0.));+#4052 = DEFINITIONAL_REPRESENTATION('',(#4053),#4056);+#4053 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4054,#4055),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.937143740353,-0.897357967792),.PIECEWISE_BEZIER_KNOTS.);+#4054 = CARTESIAN_POINT('',(3.978577256124E-02,-5.00001E-02));+#4055 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4056 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4057 = ORIENTED_EDGE('',*,*,#4058,.T.);+#4058 = EDGE_CURVE('',#4032,#4059,#4061,.T.);+#4059 = VERTEX_POINT('',#4060);+#4060 = CARTESIAN_POINT('',(4.845198044586E-02,0.139841081775,1.75));+#4061 = SURFACE_CURVE('',#4062,(#4066,#4073),.PCURVE_S1.);+#4062 = LINE('',#4063,#4064);+#4063 = CARTESIAN_POINT('',(-0.553147608871,7.345934127427E-03,1.75));+#4064 = VECTOR('',#4065,1.);+#4065 = DIRECTION('',(-0.976595648113,-0.215083565358,-0.));+#4066 = PCURVE('',#2438,#4067);+#4067 = DEFINITIONAL_REPRESENTATION('',(#4068),#4072);+#4068 = LINE('',#4069,#4070);+#4069 = CARTESIAN_POINT('',(2.480324028057,0.439549866524));+#4070 = VECTOR('',#4071,1.);+#4071 = DIRECTION('',(-0.409996746591,0.912086984769));+#4072 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4073 = PCURVE('',#4074,#4079);+#4074 = PLANE('',#4075);+#4075 = AXIS2_PLACEMENT_3D('',#4076,#4077,#4078);+#4076 = CARTESIAN_POINT('',(4.845198044586E-02,0.139841081775,1.8000001)+ );+#4077 = DIRECTION('',(0.215083565358,-0.976595648113,0.));+#4078 = DIRECTION('',(0.976595648113,0.215083565358,0.));+#4079 = DEFINITIONAL_REPRESENTATION('',(#4080),#4083);+#4080 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4081,#4082),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.683781363723,-0.616017069582),.PIECEWISE_BEZIER_KNOTS.);+#4081 = CARTESIAN_POINT('',(6.776429414078E-02,-5.00001E-02));+#4082 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4083 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4084 = ORIENTED_EDGE('',*,*,#4085,.T.);+#4085 = EDGE_CURVE('',#4059,#4086,#4088,.T.);+#4086 = VERTEX_POINT('',#4087);+#4087 = CARTESIAN_POINT('',(4.845198044586E-02,0.103600576075,1.75));+#4088 = SURFACE_CURVE('',#4089,(#4093,#4100),.PCURVE_S1.);+#4089 = LINE('',#4090,#4091);+#4090 = CARTESIAN_POINT('',(4.845198044586E-02,1.18188592842,1.75));+#4091 = VECTOR('',#4092,1.);+#4092 = DIRECTION('',(0.,-1.,0.));+#4093 = PCURVE('',#2438,#4094);+#4094 = DEFINITIONAL_REPRESENTATION('',(#4095),#4099);+#4095 = LINE('',#4096,#4097);+#4096 = CARTESIAN_POINT('',(1.89658903452,-0.743970188811));+#4097 = VECTOR('',#4098,1.);+#4098 = DIRECTION('',(0.802556617983,0.596575959062));+#4099 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4100 = PCURVE('',#4101,#4106);+#4101 = PLANE('',#4102);+#4102 = AXIS2_PLACEMENT_3D('',#4103,#4104,#4105);+#4103 = CARTESIAN_POINT('',(4.845198044586E-02,0.103600576075,1.8000001)+ );+#4104 = DIRECTION('',(1.,0.,0.));+#4105 = DIRECTION('',(0.,1.,0.));+#4106 = DEFINITIONAL_REPRESENTATION('',(#4107),#4110);+#4107 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4108,#4109),.UNSPECIFIED.,.F.,+ .F.,(2,2),(1.042044846646,1.078285352345),.PIECEWISE_BEZIER_KNOTS.);+#4108 = CARTESIAN_POINT('',(3.624050569934E-02,-5.00001E-02));+#4109 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4110 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4111 = ORIENTED_EDGE('',*,*,#4112,.T.);+#4112 = EDGE_CURVE('',#4086,#4113,#4115,.T.);+#4113 = VERTEX_POINT('',#4114);+#4114 = CARTESIAN_POINT('',(0.115024213741,0.118569480603,1.75));+#4115 = SURFACE_CURVE('',#4116,(#4120,#4127),.PCURVE_S1.);+#4116 = LINE('',#4117,#4118);+#4117 = CARTESIAN_POINT('',(-0.510151020103,-2.200246546815E-02,1.75));+#4118 = VECTOR('',#4119,1.);+#4119 = DIRECTION('',(0.97564065493,0.219374821819,0.));+#4120 = PCURVE('',#2438,#4121);+#4121 = DEFINITIONAL_REPRESENTATION('',(#4122),#4126);+#4122 = LINE('',#4123,#4124);+#4123 = CARTESIAN_POINT('',(2.529528511561,0.422551219293));+#4124 = VECTOR('',#4125,1.);+#4125 = DIRECTION('',(0.405983044346,-0.913880609108));+#4126 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4127 = PCURVE('',#4128,#4133);+#4128 = PLANE('',#4129);+#4129 = AXIS2_PLACEMENT_3D('',#4130,#4131,#4132);+#4130 = CARTESIAN_POINT('',(0.115024213741,0.118569480603,1.8000001));+#4131 = DIRECTION('',(-0.219374821819,0.97564065493,0.));+#4132 = DIRECTION('',(-0.97564065493,-0.219374821819,0.));+#4133 = DEFINITIONAL_REPRESENTATION('',(#4134),#4137);+#4134 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4135,#4136),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.572549942159,0.640784320216),.PIECEWISE_BEZIER_KNOTS.);+#4135 = CARTESIAN_POINT('',(6.823437805625E-02,-5.00001E-02));+#4136 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4137 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4138 = ORIENTED_EDGE('',*,*,#4139,.T.);+#4139 = EDGE_CURVE('',#4113,#3868,#4140,.T.);+#4140 = SURFACE_CURVE('',#4141,(#4145,#4152),.PCURVE_S1.);+#4141 = LINE('',#4142,#4143);+#4142 = CARTESIAN_POINT('',(0.115024213741,1.077005117089,1.75));+#4143 = VECTOR('',#4144,1.);+#4144 = DIRECTION('',(0.,-1.,0.));+#4145 = PCURVE('',#2438,#4146);+#4146 = DEFINITIONAL_REPRESENTATION('',(#4147),#4151);+#4147 = LINE('',#4148,#4149);+#4148 = CARTESIAN_POINT('',(2.020477217678,-0.734828804609));+#4149 = VECTOR('',#4150,1.);+#4150 = DIRECTION('',(0.802556617983,0.596575959062));+#4151 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4152 = PCURVE('',#4153,#4158);+#4153 = PLANE('',#4154);+#4154 = AXIS2_PLACEMENT_3D('',#4155,#4156,#4157);+#4155 = CARTESIAN_POINT('',(0.115024213741,-0.106161046587,1.8000001));+#4156 = DIRECTION('',(1.,0.,0.));+#4157 = DIRECTION('',(0.,1.,0.));+#4158 = DEFINITIONAL_REPRESENTATION('',(#4159),#4162);+#4159 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4160,#4161),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.958435636486,1.183166163676),.PIECEWISE_BEZIER_KNOTS.);+#4160 = CARTESIAN_POINT('',(0.22473052719,-5.00001E-02));+#4161 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4162 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4163 = FACE_BOUND('',#4164,.F.);+#4164 = EDGE_LOOP('',(#4165,#4194,#4221,#4257,#4293,#4329,#4374,#4410,+ #4446,#4482,#4518,#4545,#4581,#4617,#4653,#4698,#4743,#4788,#4824,+ #4860,#4887,#4914));+#4165 = ORIENTED_EDGE('',*,*,#4166,.T.);+#4166 = EDGE_CURVE('',#4167,#4169,#4171,.T.);+#4167 = VERTEX_POINT('',#4168);+#4168 = CARTESIAN_POINT('',(-5.317900292839E-02,0.154416067762,1.75));+#4169 = VERTEX_POINT('',#4170);+#4170 = CARTESIAN_POINT('',(-0.202080211128,0.154416067762,1.75));+#4171 = SURFACE_CURVE('',#4172,(#4176,#4183),.PCURVE_S1.);+#4172 = LINE('',#4173,#4174);+#4173 = CARTESIAN_POINT('',(-0.941082925755,0.154416067762,1.75));+#4174 = VECTOR('',#4175,1.);+#4175 = DIRECTION('',(-1.,-0.,-0.));+#4176 = PCURVE('',#2438,#4177);+#4177 = DEFINITIONAL_REPRESENTATION('',(#4178),#4182);+#4178 = LINE('',#4179,#4180);+#4179 = CARTESIAN_POINT('',(2.130859035276,0.663151416416));+#4180 = VECTOR('',#4181,1.);+#4181 = DIRECTION('',(-0.596575959062,0.802556617983));+#4182 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4183 = PCURVE('',#4184,#4189);+#4184 = PLANE('',#4185);+#4185 = AXIS2_PLACEMENT_3D('',#4186,#4187,#4188);+#4186 = CARTESIAN_POINT('',(-0.202080211128,0.154416067762,1.8000001));+#4187 = DIRECTION('',(0.,-1.,0.));+#4188 = DIRECTION('',(1.,0.,0.));+#4189 = DEFINITIONAL_REPRESENTATION('',(#4190),#4193);+#4190 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4191,#4192),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.887903922827,-0.739002714627),.PIECEWISE_BEZIER_KNOTS.);+#4191 = CARTESIAN_POINT('',(0.148901208199,-5.00001E-02));+#4192 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4193 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4194 = ORIENTED_EDGE('',*,*,#4195,.T.);+#4195 = EDGE_CURVE('',#4169,#4196,#4198,.T.);+#4196 = VERTEX_POINT('',#4197);+#4197 = CARTESIAN_POINT('',(-0.202080211128,6.696615183575E-03,1.75));+#4198 = SURFACE_CURVE('',#4199,(#4203,#4210),.PCURVE_S1.);+#4199 = LINE('',#4200,#4201);+#4200 = CARTESIAN_POINT('',(-0.202080211128,1.133433947974,1.75));+#4201 = VECTOR('',#4202,1.);+#4202 = DIRECTION('',(0.,-1.,0.));+#4203 = PCURVE('',#2438,#4204);+#4204 = DEFINITIONAL_REPRESENTATION('',(#4205),#4209);+#4205 = LINE('',#4206,#4207);+#4206 = CARTESIAN_POINT('',(1.786013009617,-0.513998633742));+#4207 = VECTOR('',#4208,1.);+#4208 = DIRECTION('',(0.802556617983,0.596575959062));+#4209 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4210 = PCURVE('',#4211,#4216);+#4211 = PLANE('',#4212);+#4212 = AXIS2_PLACEMENT_3D('',#4213,#4214,#4215);+#4213 = CARTESIAN_POINT('',(-0.202080211128,6.696615183575E-03,1.8000001+ ));+#4214 = DIRECTION('',(1.,0.,0.));+#4215 = DIRECTION('',(0.,1.,0.));+#4216 = DEFINITIONAL_REPRESENTATION('',(#4217),#4220);+#4217 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4218,#4219),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.979017880212,1.126737332791),.PIECEWISE_BEZIER_KNOTS.);+#4218 = CARTESIAN_POINT('',(0.147719452579,-5.00001E-02));+#4219 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4220 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4221 = ORIENTED_EDGE('',*,*,#4222,.T.);+#4222 = EDGE_CURVE('',#4196,#4223,#4225,.T.);+#4223 = VERTEX_POINT('',#4224);+#4224 = CARTESIAN_POINT('',(-0.173127198422,1.762785467441E-02,1.75));+#4225 = SURFACE_CURVE('',#4226,(#4232,#4241),.PCURVE_S1.);+#4226 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4227,#4228,#4229,#4230,#4231),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4227 = CARTESIAN_POINT('',(-0.202080211128,6.696615183574E-03,1.75));+#4228 = CARTESIAN_POINT('',(-0.195186670916,1.034034358144E-02,1.75));+#4229 = CARTESIAN_POINT('',(-0.188063277886,1.337682355174E-02,1.75));+#4230 = CARTESIAN_POINT('',(-0.180710091333,1.580599079328E-02,1.75));+#4231 = CARTESIAN_POINT('',(-0.173127198422,1.762785467441E-02,1.75));+#4232 = PCURVE('',#2438,#4233);+#4233 = DEFINITIONAL_REPRESENTATION('',(#4234),#4240);+#4234 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4235,#4236,#4237,#4238,#4239),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4235 = CARTESIAN_POINT('',(2.690283512777,0.158185771179));+#4236 = CARTESIAN_POINT('',(2.6914717348,0.150479554096));+#4237 = CARTESIAN_POINT('',(2.693284432734,0.142951136927));+#4238 = CARTESIAN_POINT('',(2.695721622807,0.135600605619));+#4239 = CARTESIAN_POINT('',(2.698783245503,0.128428024538));+#4240 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4241 = PCURVE('',#4242,#4249);+#4242 = SURFACE_OF_LINEAR_EXTRUSION('',#4243,#4247);+#4243 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4244,#4245,#4246),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4244 = CARTESIAN_POINT('',(-0.173127198422,1.762785467441E-02,1.8000001+ ));+#4245 = CARTESIAN_POINT('',(-0.188293062221,1.398410817746E-02,1.8000001+ ));+#4246 = CARTESIAN_POINT('',(-0.202080211128,6.696615183575E-03,1.8000001+ ));+#4247 = VECTOR('',#4248,1.);+#4248 = DIRECTION('',(0.,0.,1.));+#4249 = DEFINITIONAL_REPRESENTATION('',(#4250),#4256);+#4250 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4251,#4252,#4253,#4254,#4255),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4251 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#4252 = CARTESIAN_POINT('',(0.75000124179,-5.00001E-02));+#4253 = CARTESIAN_POINT('',(0.499999970896,-5.00001E-02));+#4254 = CARTESIAN_POINT('',(0.249998714601,-5.00001E-02));+#4255 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4256 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4257 = ORIENTED_EDGE('',*,*,#4258,.T.);+#4258 = EDGE_CURVE('',#4223,#4259,#4261,.T.);+#4259 = VERTEX_POINT('',#4260);+#4260 = CARTESIAN_POINT('',(-0.142007633746,2.127160117135E-02,1.75));+#4261 = SURFACE_CURVE('',#4262,(#4268,#4277),.PCURVE_S1.);+#4262 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4263,#4264,#4265,#4266,#4267),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4263 = CARTESIAN_POINT('',(-0.173127198422,1.762785467441E-02,1.75));+#4264 = CARTESIAN_POINT('',(-0.165544216466,1.944973994962E-02,1.75));+#4265 = CARTESIAN_POINT('',(-0.157829913175,2.066432934822E-02,1.75));+#4266 = CARTESIAN_POINT('',(-0.149984357697,2.127160117135E-02,1.75));+#4267 = CARTESIAN_POINT('',(-0.142007633746,2.127160117135E-02,1.75));+#4268 = PCURVE('',#2438,#4269);+#4269 = DEFINITIONAL_REPRESENTATION('',(#4270),#4276);+#4270 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4271,#4272,#4273,#4274,#4275),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4271 = CARTESIAN_POINT('',(2.698783245503,0.128428024538));+#4272 = CARTESIAN_POINT('',(2.701844904151,0.12125535923));+#4273 = CARTESIAN_POINT('',(2.705472295276,0.114339599235));+#4274 = CARTESIAN_POINT('',(2.709665395039,0.107680812994));+#4275 = CARTESIAN_POINT('',(2.71442411678,0.101279040397));+#4276 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4277 = PCURVE('',#4278,#4285);+#4278 = SURFACE_OF_LINEAR_EXTRUSION('',#4279,#4283);+#4279 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4280,#4281,#4282),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4280 = CARTESIAN_POINT('',(-0.142007633746,2.127160117135E-02,1.8000001+ ));+#4281 = CARTESIAN_POINT('',(-0.157961334624,2.127160117135E-02,1.8000001+ ));+#4282 = CARTESIAN_POINT('',(-0.173127198422,1.762785467441E-02,1.8000001+ ));+#4283 = VECTOR('',#4284,1.);+#4284 = DIRECTION('',(0.,0.,1.));+#4285 = DEFINITIONAL_REPRESENTATION('',(#4286),#4292);+#4286 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4287,#4288,#4289,#4290,#4291),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4287 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#4288 = CARTESIAN_POINT('',(0.749998349674,-5.00001E-02));+#4289 = CARTESIAN_POINT('',(0.499996256884,-5.00001E-02));+#4290 = CARTESIAN_POINT('',(0.249996035789,-5.00001E-02));+#4291 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4292 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4293 = ORIENTED_EDGE('',*,*,#4294,.T.);+#4294 = EDGE_CURVE('',#4259,#4295,#4297,.T.);+#4295 = VERTEX_POINT('',#4296);+#4296 = CARTESIAN_POINT('',(-9.069974388341E-02,3.742226131998E-03,1.75)+ );+#4297 = SURFACE_CURVE('',#4298,(#4304,#4313),.PCURVE_S1.);+#4298 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4299,#4300,#4301,#4302,#4303),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4299 = CARTESIAN_POINT('',(-0.142007633746,2.127160117135E-02,1.75));+#4300 = CARTESIAN_POINT('',(-0.125571491157,2.127160117135E-02,1.75));+#4301 = CARTESIAN_POINT('',(-0.111534788807,1.835357835592E-02,1.75));+#4302 = CARTESIAN_POINT('',(-9.991000600952E-02,1.250921361032E-02,1.75)+ );+#4303 = CARTESIAN_POINT('',(-9.069974388341E-02,3.742226131997E-03,1.75)+ );+#4304 = PCURVE('',#2438,#4305);+#4305 = DEFINITIONAL_REPRESENTATION('',(#4306),#4312);+#4306 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4307,#4308,#4309,#4310,#4311),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4307 = CARTESIAN_POINT('',(2.71442411678,0.101279040397));+#4308 = CARTESIAN_POINT('',(2.724229524308,8.808810538872E-02));+#4309 = CARTESIAN_POINT('',(2.734945361997,7.85636792822E-02));+#4310 = CARTESIAN_POINT('',(2.746570861548,7.272074041899E-02));+#4311 = CARTESIAN_POINT('',(2.759101486329,7.05591575593E-02));+#4312 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4313 = PCURVE('',#4314,#4321);+#4314 = SURFACE_OF_LINEAR_EXTRUSION('',#4315,#4319);+#4315 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4316,#4317,#4318),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4316 = CARTESIAN_POINT('',(-9.069974388341E-02,3.742226131998E-03,+ 1.8000001));+#4317 = CARTESIAN_POINT('',(-0.109115435638,2.127160117135E-02,1.8000001+ ));+#4318 = CARTESIAN_POINT('',(-0.142007633746,2.127160117135E-02,1.8000001+ ));+#4319 = VECTOR('',#4320,1.);+#4320 = DIRECTION('',(0.,0.,1.));+#4321 = DEFINITIONAL_REPRESENTATION('',(#4322),#4328);+#4322 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4323,#4324,#4325,#4326,#4327),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4323 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#4324 = CARTESIAN_POINT('',(0.750151349953,-5.00001E-02));+#4325 = CARTESIAN_POINT('',(0.500144796307,-5.00001E-02));+#4326 = CARTESIAN_POINT('',(0.250065602985,-5.00001E-02));+#4327 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4328 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4329 = ORIENTED_EDGE('',*,*,#4330,.T.);+#4330 = EDGE_CURVE('',#4295,#4331,#4333,.T.);+#4331 = VERTEX_POINT('',#4332);+#4332 = CARTESIAN_POINT('',(-7.228405212858E-02,-4.530063212418E-02,1.75+ ));+#4333 = SURFACE_CURVE('',#4334,(#4343,#4355),.PCURVE_S1.);+#4334 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4335,#4336,#4337,#4338,#4339,+ #4340,#4341,#4342),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.174966774192,+ 1.),.UNSPECIFIED.);+#4335 = CARTESIAN_POINT('',(-9.069974388341E-02,3.742226131997E-03,1.75)+ );+#4336 = CARTESIAN_POINT('',(-8.908840619024E-02,2.208439450798E-03,1.75)+ );+#4337 = CARTESIAN_POINT('',(-8.757102588218E-02,6.032451255575E-04,1.75)+ );+#4338 = CARTESIAN_POINT('',(-8.614762975481E-02,-1.073347174043E-03,1.75+ ));+#4339 = CARTESIAN_POINT('',(-7.854963046759E-02,-1.106365121173E-02,1.75+ ));+#4340 = CARTESIAN_POINT('',(-7.437106425212E-02,-2.089307752451E-02,1.75+ ));+#4341 = CARTESIAN_POINT('',(-7.228405212858E-02,-3.230759584792E-02,1.75+ ));+#4342 = CARTESIAN_POINT('',(-7.228405212858E-02,-4.530063212418E-02,1.75+ ));+#4343 = PCURVE('',#2438,#4344);+#4344 = DEFINITIONAL_REPRESENTATION('',(#4345),#4354);+#4345 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4346,#4347,#4348,#4349,#4350,+ #4351,#4352,#4353),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.174966774192,+ 1.),.UNSPECIFIED.);+#4346 = CARTESIAN_POINT('',(2.759101486329,7.05591575593E-02));+#4347 = CARTESIAN_POINT('',(2.761293722311,7.018098809017E-02));+#4348 = CARTESIAN_POINT('',(2.763487214252,6.9920824826E-02));+#4349 = CARTESIAN_POINT('',(2.765681938408,6.977868350306E-02));+#4350 = CARTESIAN_POINT('',(2.77823250674,6.964083410427E-02));+#4351 = CARTESIAN_POINT('',(2.788614010026,7.215129756394E-02));+#4352 = CARTESIAN_POINT('',(2.799019868507,7.728597938841E-02));+#4353 = CARTESIAN_POINT('',(2.809447515758,8.503731246605E-02));+#4354 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4355 = PCURVE('',#4356,#4363);+#4356 = SURFACE_OF_LINEAR_EXTRUSION('',#4357,#4361);+#4357 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4358,#4359,#4360),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4358 = CARTESIAN_POINT('',(-7.228405212858E-02,-4.530063212418E-02,+ 1.8000001));+#4359 = CARTESIAN_POINT('',(-7.228405212858E-02,-1.378714890736E-02,+ 1.8000001));+#4360 = CARTESIAN_POINT('',(-9.069974388341E-02,3.742226131998E-03,+ 1.8000001));+#4361 = VECTOR('',#4362,1.);+#4362 = DIRECTION('',(0.,0.,1.));+#4363 = DEFINITIONAL_REPRESENTATION('',(#4364),#4373);+#4364 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4365,#4366,#4367,#4368,#4369,+ #4370,#4371,#4372),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.174966774192,+ 1.),.UNSPECIFIED.);+#4365 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#4366 = CARTESIAN_POINT('',(0.956250959382,-5.00001E-02));+#4367 = CARTESIAN_POINT('',(0.912500961637,-5.00001E-02));+#4368 = CARTESIAN_POINT('',(0.868750483022,-5.00001E-02));+#4369 = CARTESIAN_POINT('',(0.61870024792,-5.00001E-02));+#4370 = CARTESIAN_POINT('',(0.412400374399,-5.00001E-02));+#4371 = CARTESIAN_POINT('',(0.206150430704,-5.00001E-02));+#4372 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4373 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4374 = ORIENTED_EDGE('',*,*,#4375,.T.);+#4375 = EDGE_CURVE('',#4331,#4376,#4378,.T.);+#4376 = VERTEX_POINT('',#4377);+#4377 = CARTESIAN_POINT('',(-9.01088660731E-02,-9.454044965046E-02,1.75)+ );+#4378 = SURFACE_CURVE('',#4379,(#4385,#4394),.PCURVE_S1.);+#4379 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4380,#4381,#4382,#4383,#4384),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4380 = CARTESIAN_POINT('',(-7.228405212858E-02,-4.530063212418E-02,1.75+ ));+#4381 = CARTESIAN_POINT('',(-7.228405212858E-02,-6.12451666411E-02,1.75)+ );+#4382 = CARTESIAN_POINT('',(-7.525143841973E-02,-7.477317483553E-02,1.75+ ));+#4383 = CARTESIAN_POINT('',(-8.119447535212E-02,-8.58723128168E-02,1.75)+ );+#4384 = CARTESIAN_POINT('',(-9.01088660731E-02,-9.454044965046E-02,1.75)+ );+#4385 = PCURVE('',#2438,#4386);+#4386 = DEFINITIONAL_REPRESENTATION('',(#4387),#4393);+#4387 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4388,#4389,#4390,#4391,#4392),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4388 = CARTESIAN_POINT('',(2.809447515758,8.503731246605E-02));+#4389 = CARTESIAN_POINT('',(2.822243907455,9.454943843728E-02));+#4390 = CARTESIAN_POINT('',(2.831330628637,0.105001418406));+#4391 = CARTESIAN_POINT('',(2.83669284232,0.116392520913));+#4392 = CARTESIAN_POINT('',(2.838331401708,0.128718026226));+#4393 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4394 = PCURVE('',#4395,#4402);+#4395 = SURFACE_OF_LINEAR_EXTRUSION('',#4396,#4400);+#4396 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4397,#4398,#4399),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4397 = CARTESIAN_POINT('',(-9.01088660731E-02,-9.454044965046E-02,+ 1.8000001));+#4398 = CARTESIAN_POINT('',(-7.228405212858E-02,-7.720803388121E-02,+ 1.8000001));+#4399 = CARTESIAN_POINT('',(-7.228405212858E-02,-4.530063212418E-02,+ 1.8000001));+#4400 = VECTOR('',#4401,1.);+#4401 = DIRECTION('',(0.,0.,1.));+#4402 = DEFINITIONAL_REPRESENTATION('',(#4403),#4409);+#4403 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4404,#4405,#4406,#4407,#4408),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4404 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#4405 = CARTESIAN_POINT('',(0.75014364005,-5.00001E-02));+#4406 = CARTESIAN_POINT('',(0.500133008867,-5.00001E-02));+#4407 = CARTESIAN_POINT('',(0.250055645706,-5.00001E-02));+#4408 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4409 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4410 = ORIENTED_EDGE('',*,*,#4411,.T.);+#4411 = EDGE_CURVE('',#4376,#4412,#4414,.T.);+#4412 = VERTEX_POINT('',#4413);+#4413 = CARTESIAN_POINT('',(-0.140825878125,-0.11187286542,1.75));+#4414 = SURFACE_CURVE('',#4415,(#4421,#4430),.PCURVE_S1.);+#4415 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4416,#4417,#4418,#4419,#4420),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4416 = CARTESIAN_POINT('',(-9.01088660731E-02,-9.454044965046E-02,1.75)+ );+#4417 = CARTESIAN_POINT('',(-9.902383195638E-02,-0.103209145758,1.75));+#4418 = CARTESIAN_POINT('',(-0.110451853494,-0.108987812684,1.75));+#4419 = CARTESIAN_POINT('',(-0.12439025686,-0.11187286542,1.75));+#4420 = CARTESIAN_POINT('',(-0.140825878125,-0.11187286542,1.75));+#4421 = PCURVE('',#2438,#4422);+#4422 = DEFINITIONAL_REPRESENTATION('',(#4423),#4429);+#4423 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4424,#4425,#4426,#4427,#4428),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4424 = CARTESIAN_POINT('',(2.838331401708,0.128718026226));+#4425 = CARTESIAN_POINT('',(2.839970066817,0.141044326789));+#4426 = CARTESIAN_POINT('',(2.837790091293,0.153663374868));+#4427 = CARTESIAN_POINT('',(2.831790193103,0.166570885836));+#4428 = CARTESIAN_POINT('',(2.821985096584,0.179761402453));+#4429 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4430 = PCURVE('',#4431,#4438);+#4431 = SURFACE_OF_LINEAR_EXTRUSION('',#4432,#4436);+#4432 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4433,#4434,#4435),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4433 = CARTESIAN_POINT('',(-0.140825878125,-0.11187286542,1.8000001));+#4434 = CARTESIAN_POINT('',(-0.107933680018,-0.11187286542,1.8000001));+#4435 = CARTESIAN_POINT('',(-9.01088660731E-02,-9.454044965046E-02,+ 1.8000001));+#4436 = VECTOR('',#4437,1.);+#4437 = DIRECTION('',(0.,0.,1.));+#4438 = DEFINITIONAL_REPRESENTATION('',(#4439),#4445);+#4439 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4440,#4441,#4442,#4443,#4444),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4440 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#4441 = CARTESIAN_POINT('',(0.74992822054,-5.00001E-02));+#4442 = CARTESIAN_POINT('',(0.499845788998,-5.00001E-02));+#4443 = CARTESIAN_POINT('',(0.249840725324,-5.00001E-02));+#4444 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4445 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4446 = ORIENTED_EDGE('',*,*,#4447,.T.);+#4447 = EDGE_CURVE('',#4412,#4448,#4450,.T.);+#4448 = VERTEX_POINT('',#4449);+#4449 = CARTESIAN_POINT('',(-0.178248139445,-0.107047363302,1.75));+#4450 = SURFACE_CURVE('',#4451,(#4457,#4466),.PCURVE_S1.);+#4451 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4452,#4453,#4454,#4455,#4456),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4452 = CARTESIAN_POINT('',(-0.140825878125,-0.11187286542,1.75));+#4453 = CARTESIAN_POINT('',(-0.150378267601,-0.11187286542,1.75));+#4454 = CARTESIAN_POINT('',(-0.159799546039,-0.11106863782,1.75));+#4455 = CARTESIAN_POINT('',(-0.169089549588,-0.109460110092,1.75));+#4456 = CARTESIAN_POINT('',(-0.178248139445,-0.107047363302,1.75));+#4457 = PCURVE('',#2438,#4458);+#4458 = DEFINITIONAL_REPRESENTATION('',(#4459),#4465);+#4459 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4460,#4461,#4462,#4463,#4464),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4460 = CARTESIAN_POINT('',(2.821985096584,0.179761402453));+#4461 = CARTESIAN_POINT('',(2.816286370671,0.187427735845));+#4462 = CARTESIAN_POINT('',(2.810020424269,0.194509062354));+#4463 = CARTESIAN_POINT('',(2.803187296918,0.201005207211));+#4464 = CARTESIAN_POINT('',(2.795787136487,0.206916107382));+#4465 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4466 = PCURVE('',#4467,#4474);+#4467 = SURFACE_OF_LINEAR_EXTRUSION('',#4468,#4472);+#4468 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4469,#4470,#4471),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4469 = CARTESIAN_POINT('',(-0.178248139445,-0.107047363302,1.8000001));+#4470 = CARTESIAN_POINT('',(-0.159930927325,-0.11187286542,1.8000001));+#4471 = CARTESIAN_POINT('',(-0.140825878125,-0.11187286542,1.8000001));+#4472 = VECTOR('',#4473,1.);+#4473 = DIRECTION('',(0.,0.,1.));+#4474 = DEFINITIONAL_REPRESENTATION('',(#4475),#4481);+#4475 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4476,#4477,#4478,#4479,#4480),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4476 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#4477 = CARTESIAN_POINT('',(0.750003536356,-5.00001E-02));+#4478 = CARTESIAN_POINT('',(0.500002062833,-5.00001E-02));+#4479 = CARTESIAN_POINT('',(0.249999557714,-5.00001E-02));+#4480 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4481 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4482 = ORIENTED_EDGE('',*,*,#4483,.T.);+#4483 = EDGE_CURVE('',#4448,#4484,#4486,.T.);+#4484 = VERTEX_POINT('',#4485);+#4485 = CARTESIAN_POINT('',(-0.214685604415,-9.237389767931E-02,1.75));+#4486 = SURFACE_CURVE('',#4487,(#4493,#4502),.PCURVE_S1.);+#4487 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4488,#4489,#4490,#4491,#4492),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4488 = CARTESIAN_POINT('',(-0.178248139445,-0.107047363302,1.75));+#4489 = CARTESIAN_POINT('',(-0.187407276825,-0.104634472272,1.75));+#4490 = CARTESIAN_POINT('',(-0.196533332286,-0.101384473484,1.75));+#4491 = CARTESIAN_POINT('',(-0.20562615585,-9.729751102988E-02,1.75));+#4492 = CARTESIAN_POINT('',(-0.214685604415,-9.237389767931E-02,1.75));+#4493 = PCURVE('',#2438,#4494);+#4494 = DEFINITIONAL_REPRESENTATION('',(#4495),#4501);+#4495 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4496,#4497,#4498,#4499,#4500),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4496 = CARTESIAN_POINT('',(2.795787136487,0.206916107382));+#4497 = CARTESIAN_POINT('',(2.788386533656,0.21282736092));+#4498 = CARTESIAN_POINT('',(2.78033384033,0.218212665983));+#4499 = CARTESIAN_POINT('',(2.771629261628,0.223071988165));+#4500 = CARTESIAN_POINT('',(2.762273133933,0.227405399209));+#4501 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4502 = PCURVE('',#4503,#4510);+#4503 = SURFACE_OF_LINEAR_EXTRUSION('',#4504,#4508);+#4504 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4505,#4506,#4507),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4505 = CARTESIAN_POINT('',(-0.214685604415,-9.237389767931E-02,+ 1.8000001));+#4506 = CARTESIAN_POINT('',(-0.196565351565,-0.102221861185,1.8000001));+#4507 = CARTESIAN_POINT('',(-0.178248139445,-0.107047363302,1.8000001));+#4508 = VECTOR('',#4509,1.);+#4509 = DIRECTION('',(0.,0.,1.));+#4510 = DEFINITIONAL_REPRESENTATION('',(#4511),#4517);+#4511 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4512,#4513,#4514,#4515,#4516),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4512 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#4513 = CARTESIAN_POINT('',(0.749985496713,-5.00001E-02));+#4514 = CARTESIAN_POINT('',(0.499977860294,-5.00001E-02));+#4515 = CARTESIAN_POINT('',(0.249981295521,-5.00001E-02));+#4516 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4517 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4518 = ORIENTED_EDGE('',*,*,#4519,.T.);+#4519 = EDGE_CURVE('',#4484,#4520,#4522,.T.);+#4520 = VERTEX_POINT('',#4521);+#4521 = CARTESIAN_POINT('',(-0.214685604415,-0.132750548051,1.75));+#4522 = SURFACE_CURVE('',#4523,(#4527,#4534),.PCURVE_S1.);+#4523 = LINE('',#4524,#4525);+#4524 = CARTESIAN_POINT('',(-0.214685604415,1.063710366357,1.75));+#4525 = VECTOR('',#4526,1.);+#4526 = DIRECTION('',(0.,-1.,0.));+#4527 = PCURVE('',#2438,#4528);+#4528 = DEFINITIONAL_REPRESENTATION('',(#4529),#4533);+#4529 = LINE('',#4530,#4531);+#4530 = CARTESIAN_POINT('',(1.834450056884,-0.462286679365));+#4531 = VECTOR('',#4532,1.);+#4532 = DIRECTION('',(0.802556617983,0.596575959062));+#4533 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4534 = PCURVE('',#4535,#4540);+#4535 = PLANE('',#4536);+#4536 = AXIS2_PLACEMENT_3D('',#4537,#4538,#4539);+#4537 = CARTESIAN_POINT('',(-0.214685604415,-0.132750548051,1.8000001));+#4538 = DIRECTION('',(1.,0.,0.));+#4539 = DIRECTION('',(0.,1.,0.));+#4540 = DEFINITIONAL_REPRESENTATION('',(#4541),#4544);+#4541 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4542,#4543),.UNSPECIFIED.,.F.,+ .F.,(2,2),(1.156084264036,1.196460914408),.PIECEWISE_BEZIER_KNOTS.);+#4542 = CARTESIAN_POINT('',(4.037665037155E-02,-5.00001E-02));+#4543 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4544 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4545 = ORIENTED_EDGE('',*,*,#4546,.T.);+#4546 = EDGE_CURVE('',#4520,#4547,#4549,.T.);+#4547 = VERTEX_POINT('',#4548);+#4548 = CARTESIAN_POINT('',(-0.179922293241,-0.142204593016,1.75));+#4549 = SURFACE_CURVE('',#4550,(#4556,#4565),.PCURVE_S1.);+#4550 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4551,#4552,#4553,#4554,#4555),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4551 = CARTESIAN_POINT('',(-0.214685604415,-0.132750548051,1.75));+#4552 = CARTESIAN_POINT('',(-0.207003411638,-0.135902216882,1.75));+#4553 = CARTESIAN_POINT('',(-0.198648569275,-0.138528377123,1.75));+#4554 = CARTESIAN_POINT('',(-0.189621381613,-0.14062910658,1.75));+#4555 = CARTESIAN_POINT('',(-0.179922293241,-0.142204593016,1.75));+#4556 = PCURVE('',#2438,#4557);+#4557 = DEFINITIONAL_REPRESENTATION('',(#4558),#4564);+#4558 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4559,#4560,#4561,#4562,#4563),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4559 = CARTESIAN_POINT('',(2.7946776819,0.251493138128));+#4560 = CARTESIAN_POINT('',(2.801790086102,0.247207953331));+#4561 = CARTESIAN_POINT('',(2.808882026479,0.242069423364));+#4562 = CARTESIAN_POINT('',(2.815953383944,0.236077838854));+#4563 = CARTESIAN_POINT('',(2.823004043957,0.229233668625));+#4564 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4565 = PCURVE('',#4566,#4573);+#4566 = SURFACE_OF_LINEAR_EXTRUSION('',#4567,#4571);+#4567 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4568,#4569,#4570),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4568 = CARTESIAN_POINT('',(-0.179922293241,-0.142204593016,1.8000001));+#4569 = CARTESIAN_POINT('',(-0.199322781346,-0.139053244694,1.8000001));+#4570 = CARTESIAN_POINT('',(-0.214685604415,-0.132750548051,1.8000001));+#4571 = VECTOR('',#4572,1.);+#4572 = DIRECTION('',(0.,0.,1.));+#4573 = DEFINITIONAL_REPRESENTATION('',(#4574),#4580);+#4574 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4575,#4576,#4577,#4578,#4579),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4575 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#4576 = CARTESIAN_POINT('',(0.749974573611,-5.00001E-02));+#4577 = CARTESIAN_POINT('',(0.499963190436,-5.00001E-02));+#4578 = CARTESIAN_POINT('',(0.249970215152,-5.00001E-02));+#4579 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4580 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4581 = ORIENTED_EDGE('',*,*,#4582,.T.);+#4582 = EDGE_CURVE('',#4547,#4583,#4585,.T.);+#4583 = VERTEX_POINT('',#4584);+#4584 = CARTESIAN_POINT('',(-0.137083651993,-0.145355941338,1.75));+#4585 = SURFACE_CURVE('',#4586,(#4592,#4601),.PCURVE_S1.);+#4586 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4587,#4588,#4589,#4590,#4591),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4587 = CARTESIAN_POINT('',(-0.179922293241,-0.142204593016,1.75));+#4588 = CARTESIAN_POINT('',(-0.170220554981,-0.143780509891,1.75));+#4589 = CARTESIAN_POINT('',(-0.159846548786,-0.144830896686,1.75));+#4590 = CARTESIAN_POINT('',(-0.14880071963,-0.145355941338,1.75));+#4591 = CARTESIAN_POINT('',(-0.137083651993,-0.145355941338,1.75));+#4592 = PCURVE('',#2438,#4593);+#4593 = DEFINITIONAL_REPRESENTATION('',(#4594),#4600);+#4594 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4595,#4596,#4597,#4598,#4599),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4595 = CARTESIAN_POINT('',(2.823004043957,0.229233668625));+#4596 = CARTESIAN_POINT('',(2.830056630281,0.222387628499));+#4597 = CARTESIAN_POINT('',(2.83708850785,0.214688536682));+#4598 = CARTESIAN_POINT('',(2.844099562033,0.206136862409));+#4599 = CARTESIAN_POINT('',(2.851089682896,0.196733252233));+#4600 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4601 = PCURVE('',#4602,#4609);+#4602 = SURFACE_OF_LINEAR_EXTRUSION('',#4603,#4607);+#4603 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4604,#4605,#4606),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4604 = CARTESIAN_POINT('',(-0.137083651993,-0.145355941338,1.8000001));+#4605 = CARTESIAN_POINT('',(-0.160521805136,-0.145355941338,1.8000001));+#4606 = CARTESIAN_POINT('',(-0.179922293241,-0.142204593016,1.8000001));+#4607 = VECTOR('',#4608,1.);+#4608 = DIRECTION('',(0.,0.,1.));+#4609 = DEFINITIONAL_REPRESENTATION('',(#4610),#4616);+#4610 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4611,#4612,#4613,#4614,#4615),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4611 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#4612 = CARTESIAN_POINT('',(0.749961490478,-5.00001E-02));+#4613 = CARTESIAN_POINT('',(0.499945753216,-5.00001E-02));+#4614 = CARTESIAN_POINT('',(0.24995714393,-5.00001E-02));+#4615 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4616 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4617 = ORIENTED_EDGE('',*,*,#4618,.T.);+#4618 = EDGE_CURVE('',#4583,#4619,#4621,.T.);+#4619 = VERTEX_POINT('',#4620);+#4620 = CARTESIAN_POINT('',(-6.036801628722E-02,-0.118569480603,1.75));+#4621 = SURFACE_CURVE('',#4622,(#4628,#4637),.PCURVE_S1.);+#4622 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4623,#4624,#4625,#4626,#4627),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4623 = CARTESIAN_POINT('',(-0.137083651993,-0.145355941338,1.75));+#4624 = CARTESIAN_POINT('',(-0.112789132567,-0.145355941338,1.75));+#4625 = CARTESIAN_POINT('',(-9.188440876684E-02,-0.140902540561,1.75));+#4626 = CARTESIAN_POINT('',(-7.440806913424E-02,-0.131969109987,1.75));+#4627 = CARTESIAN_POINT('',(-6.036801628722E-02,-0.118569480603,1.75));+#4628 = PCURVE('',#2438,#4629);+#4629 = DEFINITIONAL_REPRESENTATION('',(#4630),#4636);+#4630 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4631,#4632,#4633,#4634,#4635),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4631 = CARTESIAN_POINT('',(2.851089682896,0.196733252233));+#4632 = CARTESIAN_POINT('',(2.865583209122,0.177235524887));+#4633 = CARTESIAN_POINT('',(2.874480358507,0.157801508615));+#4634 = CARTESIAN_POINT('',(2.877736738755,0.138446286672));+#4635 = CARTESIAN_POINT('',(2.875358735507,0.119184452592));+#4636 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4637 = PCURVE('',#4638,#4645);+#4638 = SURFACE_OF_LINEAR_EXTRUSION('',#4639,#4643);+#4639 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4640,#4641,#4642),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4640 = CARTESIAN_POINT('',(-6.036801628722E-02,-0.118569480603,+ 1.8000001));+#4641 = CARTESIAN_POINT('',(-8.84347122772E-02,-0.145355941338,1.8000001+ ));+#4642 = CARTESIAN_POINT('',(-0.137083651993,-0.145355941338,1.8000001));+#4643 = VECTOR('',#4644,1.);+#4644 = DIRECTION('',(0.,0.,1.));+#4645 = DEFINITIONAL_REPRESENTATION('',(#4646),#4652);+#4646 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4647,#4648,#4649,#4650,#4651),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4647 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#4648 = CARTESIAN_POINT('',(0.750307822044,-5.00001E-02));+#4649 = CARTESIAN_POINT('',(0.500285534717,-5.00001E-02));+#4650 = CARTESIAN_POINT('',(0.250119444983,-5.00001E-02));+#4651 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4652 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4653 = ORIENTED_EDGE('',*,*,#4654,.T.);+#4654 = EDGE_CURVE('',#4619,#4655,#4657,.T.);+#4655 = VERTEX_POINT('',#4656);+#4656 = CARTESIAN_POINT('',(-3.230132029724E-02,-4.530063212418E-02,1.75+ ));+#4657 = SURFACE_CURVE('',#4658,(#4667,#4679),.PCURVE_S1.);+#4658 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4659,#4660,#4661,#4662,#4663,+ #4664,#4665,#4666),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.219925704249,+ 1.),.UNSPECIFIED.);+#4659 = CARTESIAN_POINT('',(-6.036801628722E-02,-0.118569480603,1.75));+#4660 = CARTESIAN_POINT('',(-5.728091461067E-02,-0.115623194091,1.75));+#4661 = CARTESIAN_POINT('',(-5.441994899893E-02,-0.112517827794,1.75));+#4662 = CARTESIAN_POINT('',(-5.17853130639E-02,-0.109253438489,1.75));+#4663 = CARTESIAN_POINT('',(-4.083518363462E-02,-9.368780241314E-02,1.75+ ));+#4664 = CARTESIAN_POINT('',(-3.514190638623E-02,-7.954637021749E-02,1.75+ ));+#4665 = CARTESIAN_POINT('',(-3.230132029724E-02,-6.341165385251E-02,1.75+ ));+#4666 = CARTESIAN_POINT('',(-3.230132029724E-02,-4.530063212418E-02,1.75+ ));+#4667 = PCURVE('',#2438,#4668);+#4668 = DEFINITIONAL_REPRESENTATION('',(#4669),#4678);+#4669 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4670,#4671,#4672,#4673,#4674,+ #4675,#4676,#4677),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.219925704249,+ 1.),.UNSPECIFIED.);+#4670 = CARTESIAN_POINT('',(2.875358735507,0.119184452592));+#4671 = CARTESIAN_POINT('',(2.874835864412,0.11494919501));+#4672 = CARTESIAN_POINT('',(2.874050415443,0.110800521247));+#4673 = CARTESIAN_POINT('',(2.873002318662,0.106738620561));+#4674 = CARTESIAN_POINT('',(2.867042598382,8.866443744958E-02));+#4675 = CARTESIAN_POINT('',(2.859089770721,7.565882164123E-02));+#4676 = CARTESIAN_POINT('',(2.847835372693,6.375350658693E-02));+#4677 = CARTESIAN_POINT('',(2.833300252346,5.294890642975E-02));+#4678 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4679 = PCURVE('',#4680,#4687);+#4680 = SURFACE_OF_LINEAR_EXTRUSION('',#4681,#4685);+#4681 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4682,#4683,#4684),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4682 = CARTESIAN_POINT('',(-3.230132029724E-02,-4.530063212418E-02,+ 1.8000001));+#4683 = CARTESIAN_POINT('',(-3.230132029724E-02,-9.178301986899E-02,+ 1.8000001));+#4684 = CARTESIAN_POINT('',(-6.036801628722E-02,-0.118569480603,+ 1.8000001));+#4685 = VECTOR('',#4686,1.);+#4686 = DIRECTION('',(0.,0.,1.));+#4687 = DEFINITIONAL_REPRESENTATION('',(#4688),#4697);+#4688 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4689,#4690,#4691,#4692,#4693,+ #4694,#4695,#4696),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.219925704249,+ 1.),.UNSPECIFIED.);+#4689 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#4690 = CARTESIAN_POINT('',(0.94500418436,-5.00001E-02));+#4691 = CARTESIAN_POINT('',(0.890004197152,-5.00001E-02));+#4692 = CARTESIAN_POINT('',(0.835002110596,-5.00001E-02));+#4693 = CARTESIAN_POINT('',(0.584908058227,-5.00001E-02));+#4694 = CARTESIAN_POINT('',(0.389815730196,-5.00001E-02));+#4695 = CARTESIAN_POINT('',(0.194815957258,-5.00001E-02));+#4696 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4697 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4698 = ORIENTED_EDGE('',*,*,#4699,.T.);+#4699 = EDGE_CURVE('',#4655,#4700,#4702,.T.);+#4700 = VERTEX_POINT('',#4701);+#4701 = CARTESIAN_POINT('',(-5.908778103154E-02,2.777125708482E-02,1.75)+ );+#4702 = SURFACE_CURVE('',#4703,(#4712,#4724),.PCURVE_S1.);+#4703 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4704,#4705,#4706,#4707,#4708,+ #4709,#4710,#4711),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.816067190415,+ 1.),.UNSPECIFIED.);+#4704 = CARTESIAN_POINT('',(-3.230132029724E-02,-4.530063212418E-02,1.75+ ));+#4705 = CARTESIAN_POINT('',(-3.230132029724E-02,-2.651438245694E-02,1.75+ ));+#4706 = CARTESIAN_POINT('',(-3.526832724683E-02,-9.826469647801E-03,1.75+ ));+#4707 = CARTESIAN_POINT('',(-4.121506484627E-02,4.745162516315E-03,1.75)+ );+#4708 = CARTESIAN_POINT('',(-5.214821000203E-02,2.000049394905E-02,1.75)+ );+#4709 = CARTESIAN_POINT('',(-5.431032745464E-02,2.269863911141E-02,1.75)+ );+#4710 = CARTESIAN_POINT('',(-5.662354891684E-02,2.528890561634E-02,1.75)+ );+#4711 = CARTESIAN_POINT('',(-5.908778103154E-02,2.777125708482E-02,1.75)+ );+#4712 = PCURVE('',#2438,#4713);+#4713 = DEFINITIONAL_REPRESENTATION('',(#4714),#4723);+#4714 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4715,#4716,#4717,#4718,#4719,+ #4720,#4721,#4722),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.816067190415,+ 1.),.UNSPECIFIED.);+#4715 = CARTESIAN_POINT('',(2.833300252346,5.294890642975E-02));+#4716 = CARTESIAN_POINT('',(2.818223223349,4.174148151733E-02));+#4717 = CARTESIAN_POINT('',(2.803060183467,3.416706499147E-02));+#4718 = CARTESIAN_POINT('',(2.787817942952,3.02465731739E-02));+#4719 = CARTESIAN_POINT('',(2.769052224194,2.992007719373E-02));+#4720 = CARTESIAN_POINT('',(2.765596942645,3.004565032626E-02));+#4721 = CARTESIAN_POINT('',(2.762138094807,3.03568507952E-02));+#4722 = CARTESIAN_POINT('',(2.758675765571,3.085362537906E-02));+#4723 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4724 = PCURVE('',#4725,#4732);+#4725 = SURFACE_OF_LINEAR_EXTRUSION('',#4726,#4730);+#4726 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4727,#4728,#4729),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4727 = CARTESIAN_POINT('',(-5.908778103154E-02,2.777125708482E-02,+ 1.8000001));+#4728 = CARTESIAN_POINT('',(-3.230132029724E-02,7.878370804205E-04,+ 1.8000001));+#4729 = CARTESIAN_POINT('',(-3.230132029724E-02,-4.530063212418E-02,+ 1.8000001));+#4730 = VECTOR('',#4731,1.);+#4731 = DIRECTION('',(0.,0.,1.));+#4732 = DEFINITIONAL_REPRESENTATION('',(#4733),#4742);+#4733 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4734,#4735,#4736,#4737,#4738,+ #4739,#4740,#4741),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.816067190415,+ 1.),.UNSPECIFIED.);+#4734 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#4735 = CARTESIAN_POINT('',(0.796193603395,-5.00001E-02));+#4736 = CARTESIAN_POINT('',(0.592193696173,-5.00001E-02));+#4737 = CARTESIAN_POINT('',(0.388096493233,-5.00001E-02));+#4738 = CARTESIAN_POINT('',(0.137998835062,-5.00001E-02));+#4739 = CARTESIAN_POINT('',(9.199770166827E-02,-5.00001E-02));+#4740 = CARTESIAN_POINT('',(4.599771763688E-02,-5.00001E-02));+#4741 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4742 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4743 = ORIENTED_EDGE('',*,*,#4744,.T.);+#4744 = EDGE_CURVE('',#4700,#4745,#4747,.T.);+#4745 = VERTEX_POINT('',#4746);+#4746 = CARTESIAN_POINT('',(-0.13156879243,5.475467708923E-02,1.75));+#4747 = SURFACE_CURVE('',#4748,(#4757,#4769),.PCURVE_S1.);+#4748 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4749,#4750,#4751,#4752,#4753,+ #4754,#4755,#4756),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.203930929856,+ 1.),.UNSPECIFIED.);+#4749 = CARTESIAN_POINT('',(-5.908778103154E-02,2.777125708482E-02,1.75)+ );+#4750 = CARTESIAN_POINT('',(-6.181983620548E-02,3.052340089975E-02,1.75)+ );+#4751 = CARTESIAN_POINT('',(-6.468318590471E-02,3.308857510345E-02,1.75)+ );+#4752 = CARTESIAN_POINT('',(-6.767778373645E-02,3.546664684584E-02,1.75)+ );+#4753 = CARTESIAN_POINT('',(-8.300528872758E-02,4.621000782314E-02,1.75)+ );+#4754 = CARTESIAN_POINT('',(-9.720561702259E-02,5.191034579017E-02,1.75)+ );+#4755 = CARTESIAN_POINT('',(-0.113398908663,5.475467708923E-02,1.75));+#4756 = CARTESIAN_POINT('',(-0.13156879243,5.475467708923E-02,1.75));+#4757 = PCURVE('',#2438,#4758);+#4758 = DEFINITIONAL_REPRESENTATION('',(#4759),#4768);+#4759 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4760,#4761,#4762,#4763,#4764,+ #4765,#4766,#4767),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.203930929856,+ 1.),.UNSPECIFIED.);+#4760 = CARTESIAN_POINT('',(2.758675765571,3.085362537906E-02));+#4761 = CARTESIAN_POINT('',(2.754837135903,3.140439150373E-02));+#4762 = CARTESIAN_POINT('',(2.751070232776,3.217207049371E-02));+#4763 = CARTESIAN_POINT('',(2.747375190488,3.315670437135E-02));+#4764 = CARTESIAN_POINT('',(2.729609014046,3.904866406056E-02));+#4765 = CARTESIAN_POINT('',(2.716562595614,4.70445469216E-02));+#4766 = CARTESIAN_POINT('',(2.704619330216,5.834372062194E-02));+#4767 = CARTESIAN_POINT('',(2.693779614381,7.29260810873E-02));+#4768 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4769 = PCURVE('',#4770,#4777);+#4770 = SURFACE_OF_LINEAR_EXTRUSION('',#4771,#4775);+#4771 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4772,#4773,#4774),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4772 = CARTESIAN_POINT('',(-0.13156879243,5.475467708923E-02,1.8000001)+ );+#4773 = CARTESIAN_POINT('',(-8.587424176584E-02,5.475467708923E-02,+ 1.8000001));+#4774 = CARTESIAN_POINT('',(-5.908778103154E-02,2.777125708482E-02,+ 1.8000001));+#4775 = VECTOR('',#4776,1.);+#4776 = DIRECTION('',(0.,0.,1.));+#4777 = DEFINITIONAL_REPRESENTATION('',(#4778),#4787);+#4778 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4779,#4780,#4781,#4782,#4783,+ #4784,#4785,#4786),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.203930929856,+ 1.),.UNSPECIFIED.);+#4779 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#4780 = CARTESIAN_POINT('',(0.949003057906,-5.00001E-02));+#4781 = CARTESIAN_POINT('',(0.898003059394,-5.00001E-02));+#4782 = CARTESIAN_POINT('',(0.847001530739,-5.00001E-02));+#4783 = CARTESIAN_POINT('',(0.596909351122,-5.00001E-02));+#4784 = CARTESIAN_POINT('',(0.397818590429,-5.00001E-02));+#4785 = CARTESIAN_POINT('',(0.198818934676,-5.00001E-02));+#4786 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4787 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4788 = ORIENTED_EDGE('',*,*,#4789,.T.);+#4789 = EDGE_CURVE('',#4745,#4790,#4792,.T.);+#4790 = VERTEX_POINT('',#4791);+#4791 = CARTESIAN_POINT('',(-0.148802728564,5.327748256344E-02,1.75));+#4792 = SURFACE_CURVE('',#4793,(#4799,#4808),.PCURVE_S1.);+#4793 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4794,#4795,#4796,#4797,#4798),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4794 = CARTESIAN_POINT('',(-0.13156879243,5.475467708923E-02,1.75));+#4795 = CARTESIAN_POINT('',(-0.135901895308,5.475467708923E-02,1.75));+#4796 = CARTESIAN_POINT('',(-0.140218589851,5.450847812253E-02,1.75));+#4797 = CARTESIAN_POINT('',(-0.144518869645,5.401607892883E-02,1.75));+#4798 = CARTESIAN_POINT('',(-0.148802728564,5.327748256344E-02,1.75));+#4799 = PCURVE('',#2438,#4800);+#4800 = DEFINITIONAL_REPRESENTATION('',(#4801),#4807);+#4801 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4802,#4803,#4804,#4805,#4806),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4802 = CARTESIAN_POINT('',(2.693779614381,7.29260810873E-02));+#4803 = CARTESIAN_POINT('',(2.691194589376,7.64036414785E-02));+#4804 = CARTESIAN_POINT('',(2.688816941799,8.00149096364E-02));+#4805 = CARTESIAN_POINT('',(2.686646676489,8.375988116546E-02));+#4806 = CARTESIAN_POINT('',(2.684683794646,8.763854932665E-02));+#4807 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4808 = PCURVE('',#4809,#4816);+#4809 = SURFACE_OF_LINEAR_EXTRUSION('',#4810,#4814);+#4810 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4811,#4812,#4813),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4811 = CARTESIAN_POINT('',(-0.148802728564,5.327748256344E-02,1.8000001+ ));+#4812 = CARTESIAN_POINT('',(-0.140235000315,5.475467708923E-02,1.8000001+ ));+#4813 = CARTESIAN_POINT('',(-0.13156879243,5.475467708923E-02,1.8000001)+ );+#4814 = VECTOR('',#4815,1.);+#4815 = DIRECTION('',(0.,0.,1.));+#4816 = DEFINITIONAL_REPRESENTATION('',(#4817),#4823);+#4817 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4818,#4819,#4820,#4821,#4822),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4818 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#4819 = CARTESIAN_POINT('',(0.750000061402,-5.00001E-02));+#4820 = CARTESIAN_POINT('',(0.499999838407,-5.00001E-02));+#4821 = CARTESIAN_POINT('',(0.249999696212,-5.00001E-02));+#4822 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4823 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4824 = ORIENTED_EDGE('',*,*,#4825,.T.);+#4825 = EDGE_CURVE('',#4790,#4826,#4828,.T.);+#4826 = VERTEX_POINT('',#4827);+#4827 = CARTESIAN_POINT('',(-0.165839705429,4.864893971597E-02,1.75));+#4828 = SURFACE_CURVE('',#4829,(#4835,#4844),.PCURVE_S1.);+#4829 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4830,#4831,#4832,#4833,#4834),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4830 = CARTESIAN_POINT('',(-0.148802728564,5.327748256344E-02,1.75));+#4831 = CARTESIAN_POINT('',(-0.153086614674,5.253888151004E-02,1.75));+#4832 = CARTESIAN_POINT('',(-0.157354078039,5.152125356409E-02,1.75));+#4833 = CARTESIAN_POINT('',(-0.16160511079,5.02246028371E-02,1.75));+#4834 = CARTESIAN_POINT('',(-0.165839705429,4.864893971597E-02,1.75));+#4835 = PCURVE('',#2438,#4836);+#4836 = DEFINITIONAL_REPRESENTATION('',(#4837),#4843);+#4837 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4838,#4839,#4840,#4841,#4842),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4838 = CARTESIAN_POINT('',(2.684683794646,8.763854932665E-02));+#4839 = CARTESIAN_POINT('',(2.682720900345,9.151724210647E-02));+#4840 = CARTESIAN_POINT('',(2.680991738338,9.554921544001E-02));+#4841 = CARTESIAN_POINT('',(2.67949631002,9.973446055877E-02));+#4842 = CARTESIAN_POINT('',(2.678234611528,0.104072965248));+#4843 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4844 = PCURVE('',#4845,#4852);+#4845 = SURFACE_OF_LINEAR_EXTRUSION('',#4846,#4850);+#4846 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4847,#4848,#4849),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4847 = CARTESIAN_POINT('',(-0.165839705429,4.864893971597E-02,1.8000001+ ));+#4848 = CARTESIAN_POINT('',(-0.157370456814,5.180028803765E-02,1.8000001+ ));+#4849 = CARTESIAN_POINT('',(-0.148802728564,5.327748256344E-02,1.8000001+ ));+#4850 = VECTOR('',#4851,1.);+#4851 = DIRECTION('',(0.,0.,1.));+#4852 = DEFINITIONAL_REPRESENTATION('',(#4853),#4859);+#4853 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4854,#4855,#4856,#4857,#4858),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4854 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#4855 = CARTESIAN_POINT('',(0.749998716992,-5.00001E-02));+#4856 = CARTESIAN_POINT('',(0.499997976927,-5.00001E-02));+#4857 = CARTESIAN_POINT('',(0.249998248415,-5.00001E-02));+#4858 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4859 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4860 = ORIENTED_EDGE('',*,*,#4861,.T.);+#4861 = EDGE_CURVE('',#4826,#4862,#4864,.T.);+#4862 = VERTEX_POINT('',#4863);+#4863 = CARTESIAN_POINT('',(-0.165839705429,0.120932991845,1.75));+#4864 = SURFACE_CURVE('',#4865,(#4869,#4876),.PCURVE_S1.);+#4865 = LINE('',#4866,#4867);+#4866 = CARTESIAN_POINT('',(-0.165839705429,1.190552136305,1.75));+#4867 = VECTOR('',#4868,1.);+#4868 = DIRECTION('',(0.,1.,0.));+#4869 = PCURVE('',#2438,#4870);+#4870 = DEFINITIONAL_REPRESENTATION('',(#4871),#4875);+#4871 = LINE('',#4872,#4873);+#4872 = CARTESIAN_POINT('',(1.761792644009,-0.577159029414));+#4873 = VECTOR('',#4874,1.);+#4874 = DIRECTION('',(-0.802556617983,-0.596575959062));+#4875 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4876 = PCURVE('',#4877,#4882);+#4877 = PLANE('',#4878);+#4878 = AXIS2_PLACEMENT_3D('',#4879,#4880,#4881);+#4879 = CARTESIAN_POINT('',(-0.165839705429,0.120932991845,1.8000001));+#4880 = DIRECTION('',(-1.,0.,0.));+#4881 = DIRECTION('',(0.,-1.,0.));+#4882 = DEFINITIONAL_REPRESENTATION('',(#4883),#4886);+#4883 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4884,#4885),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-1.141903196589,-1.06961914446),.PIECEWISE_BEZIER_KNOTS.);+#4884 = CARTESIAN_POINT('',(7.228405212858E-02,-5.00001E-02));+#4885 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4886 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4887 = ORIENTED_EDGE('',*,*,#4888,.T.);+#4888 = EDGE_CURVE('',#4862,#4889,#4891,.T.);+#4889 = VERTEX_POINT('',#4890);+#4890 = CARTESIAN_POINT('',(-5.317900292839E-02,0.120932991845,1.75));+#4891 = SURFACE_CURVE('',#4892,(#4896,#4903),.PCURVE_S1.);+#4892 = LINE('',#4893,#4894);+#4893 = CARTESIAN_POINT('',(-0.866632321655,0.120932991845,1.75));+#4894 = VECTOR('',#4895,1.);+#4895 = DIRECTION('',(1.,-0.,0.));+#4896 = PCURVE('',#2438,#4897);+#4897 = DEFINITIONAL_REPRESENTATION('',(#4898),#4902);+#4898 = LINE('',#4899,#4900);+#4899 = CARTESIAN_POINT('',(2.202146539988,0.623375789511));+#4900 = VECTOR('',#4901,1.);+#4901 = DIRECTION('',(0.596575959062,-0.802556617983));+#4902 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4903 = PCURVE('',#4904,#4909);+#4904 = PLANE('',#4905);+#4905 = AXIS2_PLACEMENT_3D('',#4906,#4907,#4908);+#4906 = CARTESIAN_POINT('',(-5.317900292839E-02,0.120932991845,1.8000001+ ));+#4907 = DIRECTION('',(0.,1.,0.));+#4908 = DIRECTION('',(-1.,0.,0.));+#4909 = DEFINITIONAL_REPRESENTATION('',(#4910),#4913);+#4910 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4911,#4912),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.700792616227,0.813453318727),.PIECEWISE_BEZIER_KNOTS.);+#4911 = CARTESIAN_POINT('',(0.1126607025,-5.00001E-02));+#4912 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4913 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4914 = ORIENTED_EDGE('',*,*,#4915,.T.);+#4915 = EDGE_CURVE('',#4889,#4167,#4916,.T.);+#4916 = SURFACE_CURVE('',#4917,(#4921,#4928),.PCURVE_S1.);+#4917 = LINE('',#4918,#4919);+#4918 = CARTESIAN_POINT('',(-5.317900292839E-02,1.207293674264,1.75));+#4919 = VECTOR('',#4920,1.);+#4920 = DIRECTION('',(0.,1.,0.));+#4921 = PCURVE('',#2438,#4922);+#4922 = DEFINITIONAL_REPRESENTATION('',(#4923),#4927);+#4923 = LINE('',#4924,#4925);+#4924 = CARTESIAN_POINT('',(1.815567278568,-0.677563220856));+#4925 = VECTOR('',#4926,1.);+#4926 = DIRECTION('',(-0.802556617983,-0.596575959062));+#4927 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4928 = PCURVE('',#4929,#4934);+#4929 = PLANE('',#4930);+#4930 = AXIS2_PLACEMENT_3D('',#4931,#4932,#4933);+#4931 = CARTESIAN_POINT('',(-5.317900292839E-02,0.154416067762,1.8000001+ ));+#4932 = DIRECTION('',(-1.,0.,0.));+#4933 = DIRECTION('',(0.,-1.,0.));+#4934 = DEFINITIONAL_REPRESENTATION('',(#4935),#4938);+#4935 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4936,#4937),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-1.086360682419,-1.052877606501),.PIECEWISE_BEZIER_KNOTS.);+#4936 = CARTESIAN_POINT('',(3.348307591787E-02,-5.00001E-02));+#4937 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4938 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4939 = FACE_BOUND('',#4940,.F.);+#4940 = EDGE_LOOP('',(#4941,#4970,#4997,#5024,#5051,#5078,#5105));+#4941 = ORIENTED_EDGE('',*,*,#4942,.T.);+#4942 = EDGE_CURVE('',#4943,#4945,#4947,.T.);+#4943 = VERTEX_POINT('',#4944);+#4944 = CARTESIAN_POINT('',(-0.273182507636,0.154416067762,1.75));+#4945 = VERTEX_POINT('',#4946);+#4946 = CARTESIAN_POINT('',(-0.458324221535,0.154416067762,1.75));+#4947 = SURFACE_CURVE('',#4948,(#4952,#4959),.PCURVE_S1.);+#4948 = LINE('',#4949,#4950);+#4949 = CARTESIAN_POINT('',(-1.069204930958,0.154416067762,1.75));+#4950 = VECTOR('',#4951,1.);+#4951 = DIRECTION('',(-1.,-0.,-0.));+#4952 = PCURVE('',#2438,#4953);+#4953 = DEFINITIONAL_REPRESENTATION('',(#4954),#4958);+#4954 = LINE('',#4955,#4956);+#4955 = CARTESIAN_POINT('',(2.054424527145,0.765976579601));+#4956 = VECTOR('',#4957,1.);+#4957 = DIRECTION('',(-0.596575959062,0.802556617983));+#4958 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4959 = PCURVE('',#4960,#4965);+#4960 = PLANE('',#4961);+#4961 = AXIS2_PLACEMENT_3D('',#4962,#4963,#4964);+#4962 = CARTESIAN_POINT('',(-0.458324221535,0.154416067762,1.8000001));+#4963 = DIRECTION('',(0.,-1.,0.));+#4964 = DIRECTION('',(1.,0.,0.));+#4965 = DEFINITIONAL_REPRESENTATION('',(#4966),#4969);+#4966 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4967,#4968),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.796022423323,-0.610880709424),.PIECEWISE_BEZIER_KNOTS.);+#4967 = CARTESIAN_POINT('',(0.185141713899,-5.00001E-02));+#4968 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4969 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4970 = ORIENTED_EDGE('',*,*,#4971,.T.);+#4971 = EDGE_CURVE('',#4945,#4972,#4974,.T.);+#4972 = VERTEX_POINT('',#4973);+#4973 = CARTESIAN_POINT('',(-0.458324221535,0.120932991845,1.75));+#4974 = SURFACE_CURVE('',#4975,(#4979,#4986),.PCURVE_S1.);+#4975 = LINE('',#4976,#4977);+#4976 = CARTESIAN_POINT('',(-0.458324221535,1.190552136305,1.75));+#4977 = VECTOR('',#4978,1.);+#4978 = DIRECTION('',(0.,-1.,0.));+#4979 = PCURVE('',#2438,#4980);+#4980 = DEFINITIONAL_REPRESENTATION('',(#4981),#4985);+#4981 = LINE('',#4982,#4983);+#4982 = CARTESIAN_POINT('',(1.587303413302,-0.342423645355));+#4983 = VECTOR('',#4984,1.);+#4984 = DIRECTION('',(0.802556617983,0.596575959062));+#4985 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4986 = PCURVE('',#4987,#4992);+#4987 = PLANE('',#4988);+#4988 = AXIS2_PLACEMENT_3D('',#4989,#4990,#4991);+#4989 = CARTESIAN_POINT('',(-0.458324221535,0.120932991845,1.8000001));+#4990 = DIRECTION('',(1.,0.,0.));+#4991 = DIRECTION('',(0.,1.,0.));+#4992 = DEFINITIONAL_REPRESENTATION('',(#4993),#4996);+#4993 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4994,#4995),.UNSPECIFIED.,.F.,+ .F.,(2,2),(1.036136068542,1.06961914446),.PIECEWISE_BEZIER_KNOTS.);+#4994 = CARTESIAN_POINT('',(3.348307591787E-02,-5.00001E-02));+#4995 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4996 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4997 = ORIENTED_EDGE('',*,*,#4998,.T.);+#4998 = EDGE_CURVE('',#4972,#4999,#5001,.T.);+#4999 = VERTEX_POINT('',#5000);+#5000 = CARTESIAN_POINT('',(-0.317498343409,0.120932991845,1.75));+#5001 = SURFACE_CURVE('',#5002,(#5006,#5013),.PCURVE_S1.);+#5002 = LINE('',#5003,#5004);+#5003 = CARTESIAN_POINT('',(-0.998791991896,0.120932991845,1.75));+#5004 = VECTOR('',#5005,1.);+#5005 = DIRECTION('',(1.,-0.,0.));+#5006 = PCURVE('',#2438,#5007);+#5007 = DEFINITIONAL_REPRESENTATION('',(#5008),#5012);+#5008 = LINE('',#5009,#5010);+#5009 = CARTESIAN_POINT('',(2.123303257965,0.729441407493));+#5010 = VECTOR('',#5011,1.);+#5011 = DIRECTION('',(0.596575959062,-0.802556617983));+#5012 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5013 = PCURVE('',#5014,#5019);+#5014 = PLANE('',#5015);+#5015 = AXIS2_PLACEMENT_3D('',#5016,#5017,#5018);+#5016 = CARTESIAN_POINT('',(-0.317498343409,0.120932991845,1.8000001));+#5017 = DIRECTION('',(0.,1.,0.));+#5018 = DIRECTION('',(-1.,0.,0.));+#5019 = DEFINITIONAL_REPRESENTATION('',(#5020),#5023);+#5020 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5021,#5022),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.540467770361,0.681293648486),.PIECEWISE_BEZIER_KNOTS.);+#5021 = CARTESIAN_POINT('',(0.140825878125,-5.00001E-02));+#5022 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5023 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5024 = ORIENTED_EDGE('',*,*,#5025,.T.);+#5025 = EDGE_CURVE('',#4999,#5026,#5028,.T.);+#5026 = VERTEX_POINT('',#5027);+#5027 = CARTESIAN_POINT('',(-0.419917163864,-0.139644122505,1.75));+#5028 = SURFACE_CURVE('',#5029,(#5033,#5040),.PCURVE_S1.);+#5029 = LINE('',#5030,#5031);+#5030 = CARTESIAN_POINT('',(-9.572043862714E-02,0.685187161127,1.75));+#5031 = VECTOR('',#5032,1.);+#5032 = DIRECTION('',(-0.365804721382,-0.93069162767,-0.));+#5033 = PCURVE('',#2438,#5034);+#5034 = DEFINITIONAL_REPRESENTATION('',(#5035),#5039);+#5035 = LINE('',#5036,#5037);+#5036 = CARTESIAN_POINT('',(2.209208118176,-0.33194511629));+#5037 = VECTOR('',#5038,1.);+#5038 = DIRECTION('',(0.5287024226,0.848807250403));+#5039 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5040 = PCURVE('',#5041,#5046);+#5041 = PLANE('',#5042);+#5042 = AXIS2_PLACEMENT_3D('',#5043,#5044,#5045);+#5043 = CARTESIAN_POINT('',(-0.419917163864,-0.139644122505,1.8000001));+#5044 = DIRECTION('',(0.93069162767,-0.365804721382,0.));+#5045 = DIRECTION('',(0.365804721382,0.93069162767,0.));+#5046 = DEFINITIONAL_REPRESENTATION('',(#5047),#5050);+#5047 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5048,#5049),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.606274035897,0.886256262665),.PIECEWISE_BEZIER_KNOTS.);+#5048 = CARTESIAN_POINT('',(0.279982226768,-5.00001E-02));+#5049 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5050 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5051 = ORIENTED_EDGE('',*,*,#5052,.T.);+#5052 = EDGE_CURVE('',#5026,#5053,#5055,.T.);+#5053 = VERTEX_POINT('',#5054);+#5054 = CARTESIAN_POINT('',(-0.378358757872,-0.139644122505,1.75));+#5055 = SURFACE_CURVE('',#5056,(#5060,#5067),.PCURVE_S1.);+#5056 = LINE('',#5057,#5058);+#5057 = CARTESIAN_POINT('',(-1.029222199127,-0.139644122505,1.75));+#5058 = VECTOR('',#5059,1.);+#5059 = DIRECTION('',(1.,-0.,0.));+#5060 = PCURVE('',#2438,#5061);+#5061 = DEFINITIONAL_REPRESENTATION('',(#5062),#5066);+#5062 = LINE('',#5063,#5064);+#5063 = CARTESIAN_POINT('',(2.314277215518,0.909317413595));+#5064 = VECTOR('',#5065,1.);+#5065 = DIRECTION('',(0.596575959062,-0.802556617983));+#5066 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5067 = PCURVE('',#5068,#5073);+#5068 = PLANE('',#5069);+#5069 = AXIS2_PLACEMENT_3D('',#5070,#5071,#5072);+#5070 = CARTESIAN_POINT('',(-0.378358757872,-0.139644122505,1.8000001));+#5071 = DIRECTION('',(0.,1.,0.));+#5072 = DIRECTION('',(-1.,0.,0.));+#5073 = DEFINITIONAL_REPRESENTATION('',(#5074),#5077);+#5074 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5075,#5076),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.609305035263,0.650863441255),.PIECEWISE_BEZIER_KNOTS.);+#5075 = CARTESIAN_POINT('',(4.155840599218E-02,-5.00001E-02));+#5076 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5077 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5078 = ORIENTED_EDGE('',*,*,#5079,.T.);+#5079 = EDGE_CURVE('',#5053,#5080,#5082,.T.);+#5080 = VERTEX_POINT('',#5081);+#5081 = CARTESIAN_POINT('',(-0.273182507636,0.137477570533,1.75));+#5082 = SURFACE_CURVE('',#5083,(#5087,#5094),.PCURVE_S1.);+#5083 = LINE('',#5084,#5085);+#5084 = CARTESIAN_POINT('',(-9.655718985884E-03,0.831826243999,1.75));+#5085 = VECTOR('',#5086,1.);+#5086 = DIRECTION('',(0.354834508557,0.934929126478,0.));+#5087 = PCURVE('',#2438,#5088);+#5088 = DEFINITIONAL_REPRESENTATION('',(#5089),#5093);+#5089 = LINE('',#5090,#5091);+#5090 = CARTESIAN_POINT('',(2.142866094424,-0.488498278113));+#5091 = VECTOR('',#5092,1.);+#5092 = DIRECTION('',(-0.53864782055,-0.842531023415));+#5093 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5094 = PCURVE('',#5095,#5100);+#5095 = PLANE('',#5096);+#5096 = AXIS2_PLACEMENT_3D('',#5097,#5098,#5099);+#5097 = CARTESIAN_POINT('',(-0.273182507636,0.137477570533,1.8000001));+#5098 = DIRECTION('',(-0.934929126478,0.354834508557,0.));+#5099 = DIRECTION('',(-0.354834508557,-0.934929126478,0.));+#5100 = DEFINITIONAL_REPRESENTATION('',(#5101),#5104);+#5101 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5102,#5103),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-1.039084502761,-0.742675197296),.PIECEWISE_BEZIER_KNOTS.);+#5102 = CARTESIAN_POINT('',(0.296409305464,-5.00001E-02));+#5103 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5104 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5105 = ORIENTED_EDGE('',*,*,#5106,.T.);+#5106 = EDGE_CURVE('',#5080,#4943,#5107,.T.);+#5107 = SURFACE_CURVE('',#5108,(#5112,#5119),.PCURVE_S1.);+#5108 = LINE('',#5109,#5110);+#5109 = CARTESIAN_POINT('',(-0.273182507636,1.207293674264,1.75));+#5110 = VECTOR('',#5111,1.);+#5111 = DIRECTION('',(0.,1.,0.));+#5112 = PCURVE('',#2438,#5113);+#5113 = DEFINITIONAL_REPRESENTATION('',(#5114),#5118);+#5114 = LINE('',#5115,#5116);+#5115 = CARTESIAN_POINT('',(1.68431847675,-0.500997952173));+#5116 = VECTOR('',#5117,1.);+#5117 = DIRECTION('',(-0.802556617983,-0.596575959062));+#5118 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5119 = PCURVE('',#5120,#5125);+#5120 = PLANE('',#5121);+#5121 = AXIS2_PLACEMENT_3D('',#5122,#5123,#5124);+#5122 = CARTESIAN_POINT('',(-0.273182507636,0.154416067762,1.8000001));+#5123 = DIRECTION('',(-1.,0.,0.));+#5124 = DIRECTION('',(0.,-1.,0.));+#5125 = DEFINITIONAL_REPRESENTATION('',(#5126),#5129);+#5126 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5127,#5128),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-1.06981610373,-1.052877606501),.PIECEWISE_BEZIER_KNOTS.);+#5127 = CARTESIAN_POINT('',(1.693849722904E-02,-5.00001E-02));+#5128 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5129 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5130 = FACE_BOUND('',#5131,.F.);+#5131 = EDGE_LOOP('',(#5132,#5161,#5188,#5215,#5242,#5269,#5296,#5323,+ #5350,#5377));+#5132 = ORIENTED_EDGE('',*,*,#5133,.T.);+#5133 = EDGE_CURVE('',#5134,#5136,#5138,.T.);+#5134 = VERTEX_POINT('',#5135);+#5135 = CARTESIAN_POINT('',(-0.650753428427,0.154416067762,1.75));+#5136 = VERTEX_POINT('',#5137);+#5137 = CARTESIAN_POINT('',(-0.701175001574,0.154416067762,1.75));+#5138 = SURFACE_CURVE('',#5139,(#5143,#5150),.PCURVE_S1.);+#5139 = LINE('',#5140,#5141);+#5140 = CARTESIAN_POINT('',(-1.190630320978,0.154416067762,1.75));+#5141 = VECTOR('',#5142,1.);+#5142 = DIRECTION('',(-1.,-0.,-0.));+#5143 = PCURVE('',#2438,#5144);+#5144 = DEFINITIONAL_REPRESENTATION('',(#5145),#5149);+#5145 = LINE('',#5146,#5147);+#5146 = CARTESIAN_POINT('',(1.98198505864,0.863427329953));+#5147 = VECTOR('',#5148,1.);+#5148 = DIRECTION('',(-0.596575959062,0.802556617983));+#5149 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5150 = PCURVE('',#5151,#5156);+#5151 = PLANE('',#5152);+#5152 = AXIS2_PLACEMENT_3D('',#5153,#5154,#5155);+#5153 = CARTESIAN_POINT('',(-0.701175001574,0.154416067762,1.8000001));+#5154 = DIRECTION('',(0.,-1.,0.));+#5155 = DIRECTION('',(1.,0.,0.));+#5156 = DEFINITIONAL_REPRESENTATION('',(#5157),#5160);+#5157 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5158,#5159),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.539876892551,-0.489455319404),.PIECEWISE_BEZIER_KNOTS.);+#5158 = CARTESIAN_POINT('',(5.042157314691E-02,-5.00001E-02));+#5159 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5160 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5161 = ORIENTED_EDGE('',*,*,#5162,.T.);+#5162 = EDGE_CURVE('',#5136,#5163,#5165,.T.);+#5163 = VERTEX_POINT('',#5164);+#5164 = CARTESIAN_POINT('',(-0.701175001574,-0.139644122505,1.75));+#5165 = SURFACE_CURVE('',#5166,(#5170,#5177),.PCURVE_S1.);+#5166 = LINE('',#5167,#5168);+#5167 = CARTESIAN_POINT('',(-0.701175001574,1.06026357913,1.75));+#5168 = VECTOR('',#5169,1.);+#5169 = DIRECTION('',(0.,-1.,0.));+#5170 = PCURVE('',#2438,#5171);+#5171 = DEFINITIONAL_REPRESENTATION('',(#5172),#5176);+#5172 = LINE('',#5173,#5174);+#5173 = CARTESIAN_POINT('',(1.546988420099,-6.97951237005E-02));+#5174 = VECTOR('',#5175,1.);+#5175 = DIRECTION('',(0.802556617983,0.596575959062));+#5176 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5177 = PCURVE('',#5178,#5183);+#5178 = PLANE('',#5179);+#5179 = AXIS2_PLACEMENT_3D('',#5180,#5181,#5182);+#5180 = CARTESIAN_POINT('',(-0.701175001574,-0.139644122505,1.8000001));+#5181 = DIRECTION('',(1.,0.,0.));+#5182 = DIRECTION('',(0.,1.,0.));+#5183 = DEFINITIONAL_REPRESENTATION('',(#5184),#5187);+#5184 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5185,#5186),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.905847511368,1.199907701635),.PIECEWISE_BEZIER_KNOTS.);+#5185 = CARTESIAN_POINT('',(0.294060190267,-5.00001E-02));+#5186 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5187 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5188 = ORIENTED_EDGE('',*,*,#5189,.T.);+#5189 = EDGE_CURVE('',#5163,#5190,#5192,.T.);+#5190 = VERTEX_POINT('',#5191);+#5191 = CARTESIAN_POINT('',(-0.662767943904,-0.139644122505,1.75));+#5192 = SURFACE_CURVE('',#5193,(#5197,#5204),.PCURVE_S1.);+#5193 = LINE('',#5194,#5195);+#5194 = CARTESIAN_POINT('',(-1.171426792143,-0.139644122505,1.75));+#5195 = VECTOR('',#5196,1.);+#5196 = DIRECTION('',(1.,-0.,0.));+#5197 = PCURVE('',#2438,#5198);+#5198 = DEFINITIONAL_REPRESENTATION('',(#5199),#5203);+#5199 = LINE('',#5200,#5201);+#5200 = CARTESIAN_POINT('',(2.229441374056,1.023444650828));+#5201 = VECTOR('',#5202,1.);+#5202 = DIRECTION('',(0.596575959062,-0.802556617983));+#5203 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5204 = PCURVE('',#5205,#5210);+#5205 = PLANE('',#5206);+#5206 = AXIS2_PLACEMENT_3D('',#5207,#5208,#5209);+#5207 = CARTESIAN_POINT('',(-0.662767943904,-0.139644122505,1.8000001));+#5208 = DIRECTION('',(0.,1.,0.));+#5209 = DIRECTION('',(-1.,0.,0.));+#5210 = DEFINITIONAL_REPRESENTATION('',(#5211),#5214);+#5211 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5212,#5213),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.470251790569,0.508658848239),.PIECEWISE_BEZIER_KNOTS.);+#5212 = CARTESIAN_POINT('',(3.84070576705E-02,-5.00001E-02));+#5213 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5214 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5215 = ORIENTED_EDGE('',*,*,#5216,.T.);+#5216 = EDGE_CURVE('',#5190,#5217,#5219,.T.);+#5217 = VERTEX_POINT('',#5218);+#5218 = CARTESIAN_POINT('',(-0.662767943904,0.102418820455,1.75));+#5219 = SURFACE_CURVE('',#5220,(#5224,#5231),.PCURVE_S1.);+#5220 = LINE('',#5221,#5222);+#5221 = CARTESIAN_POINT('',(-0.662767943904,1.18129505061,1.75));+#5222 = VECTOR('',#5223,1.);+#5223 = DIRECTION('',(0.,1.,0.));+#5224 = PCURVE('',#2438,#5225);+#5225 = DEFINITIONAL_REPRESENTATION('',(#5226),#5230);+#5226 = LINE('',#5227,#5228);+#5227 = CARTESIAN_POINT('',(1.472766538944,-0.172823428186));+#5228 = VECTOR('',#5229,1.);+#5229 = DIRECTION('',(-0.802556617983,-0.596575959062));+#5230 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5231 = PCURVE('',#5232,#5237);+#5232 = PLANE('',#5233);+#5233 = AXIS2_PLACEMENT_3D('',#5234,#5235,#5236);+#5234 = CARTESIAN_POINT('',(-0.662767943904,0.102418820455,1.8000001));+#5235 = DIRECTION('',(-1.,0.,0.));+#5236 = DIRECTION('',(0.,-1.,0.));+#5237 = DEFINITIONAL_REPRESENTATION('',(#5238),#5241);+#5238 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5239,#5240),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-1.320939173114,-1.078876230155),.PIECEWISE_BEZIER_KNOTS.);+#5239 = CARTESIAN_POINT('',(0.242062942959,-5.00001E-02));+#5240 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5241 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5242 = ORIENTED_EDGE('',*,*,#5243,.T.);+#5243 = EDGE_CURVE('',#5217,#5244,#5246,.T.);+#5244 = VERTEX_POINT('',#5245);+#5245 = CARTESIAN_POINT('',(-0.563500471771,-0.139644122505,1.75));+#5246 = SURFACE_CURVE('',#5247,(#5251,#5258),.PCURVE_S1.);+#5247 = LINE('',#5248,#5249);+#5248 = CARTESIAN_POINT('',(-1.065103672082,1.083511300476,1.75));+#5249 = VECTOR('',#5250,1.);+#5250 = DIRECTION('',(0.379424173637,-0.92522283611,0.));+#5251 = PCURVE('',#2438,#5252);+#5252 = DEFINITIONAL_REPRESENTATION('',(#5253),#5257);+#5253 = LINE('',#5254,#5255);+#5254 = CARTESIAN_POINT('',(1.311219711842,0.208409207631));+#5255 = VECTOR('',#5256,1.);+#5256 = DIRECTION('',(0.968899050508,0.247456319224));+#5257 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5258 = PCURVE('',#5259,#5264);+#5259 = PLANE('',#5260);+#5260 = AXIS2_PLACEMENT_3D('',#5261,#5262,#5263);+#5261 = CARTESIAN_POINT('',(-0.563500471771,-0.139644122505,1.8000001));+#5262 = DIRECTION('',(0.92522283611,0.379424173637,0.));+#5263 = DIRECTION('',(-0.379424173637,0.92522283611,0.));+#5264 = DEFINITIONAL_REPRESENTATION('',(#5265),#5268);+#5265 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5266,#5267),.UNSPECIFIED.,.F.,+ .F.,(2,2),(1.06038506804,1.322011709225),.PIECEWISE_BEZIER_KNOTS.);+#5266 = CARTESIAN_POINT('',(0.261626641185,-5.00001E-02));+#5267 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5268 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5269 = ORIENTED_EDGE('',*,*,#5270,.T.);+#5270 = EDGE_CURVE('',#5244,#5271,#5273,.T.);+#5271 = VERTEX_POINT('',#5272);+#5272 = CARTESIAN_POINT('',(-0.513078898624,-0.139644122505,1.75));+#5273 = SURFACE_CURVE('',#5274,(#5278,#5285),.PCURVE_S1.);+#5274 = LINE('',#5275,#5276);+#5275 = CARTESIAN_POINT('',(-1.096582269503,-0.139644122505,1.75));+#5276 = VECTOR('',#5277,1.);+#5277 = DIRECTION('',(1.,-0.,0.));+#5278 = PCURVE('',#2438,#5279);+#5279 = DEFINITIONAL_REPRESENTATION('',(#5280),#5284);+#5280 = LINE('',#5281,#5282);+#5281 = CARTESIAN_POINT('',(2.274091816931,0.963377683863));+#5282 = VECTOR('',#5283,1.);+#5283 = DIRECTION('',(0.596575959062,-0.802556617983));+#5284 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5285 = PCURVE('',#5286,#5291);+#5286 = PLANE('',#5287);+#5287 = AXIS2_PLACEMENT_3D('',#5288,#5289,#5290);+#5288 = CARTESIAN_POINT('',(-0.513078898624,-0.139644122505,1.8000001));+#5289 = DIRECTION('',(0.,1.,0.));+#5290 = DIRECTION('',(-1.,0.,0.));+#5291 = DEFINITIONAL_REPRESENTATION('',(#5292),#5295);+#5292 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5293,#5294),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.533081797732,0.583503370879),.PIECEWISE_BEZIER_KNOTS.);+#5293 = CARTESIAN_POINT('',(5.042157314691E-02,-5.00001E-02));+#5294 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5295 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5296 = ORIENTED_EDGE('',*,*,#5297,.T.);+#5297 = EDGE_CURVE('',#5271,#5298,#5300,.T.);+#5298 = VERTEX_POINT('',#5299);+#5299 = CARTESIAN_POINT('',(-0.513078898624,0.154416067762,1.75));+#5300 = SURFACE_CURVE('',#5301,(#5305,#5312),.PCURVE_S1.);+#5301 = LINE('',#5302,#5303);+#5302 = CARTESIAN_POINT('',(-0.513078898624,1.207293674264,1.75));+#5303 = VECTOR('',#5304,1.);+#5304 = DIRECTION('',(0.,1.,0.));+#5305 = PCURVE('',#2438,#5306);+#5306 = DEFINITIONAL_REPRESENTATION('',(#5307),#5311);+#5307 = LINE('',#5308,#5309);+#5308 = CARTESIAN_POINT('',(1.541202057221,-0.308467515956));+#5309 = VECTOR('',#5310,1.);+#5310 = DIRECTION('',(-0.802556617983,-0.596575959062));+#5311 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5312 = PCURVE('',#5313,#5318);+#5313 = PLANE('',#5314);+#5314 = AXIS2_PLACEMENT_3D('',#5315,#5316,#5317);+#5315 = CARTESIAN_POINT('',(-0.513078898624,0.154416067762,1.8000001));+#5316 = DIRECTION('',(-1.,0.,0.));+#5317 = DIRECTION('',(0.,-1.,0.));+#5318 = DEFINITIONAL_REPRESENTATION('',(#5319),#5322);+#5319 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5320,#5321),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-1.346937796768,-1.052877606501),.PIECEWISE_BEZIER_KNOTS.);+#5320 = CARTESIAN_POINT('',(0.294060190267,-5.00001E-02));+#5321 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5322 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5323 = ORIENTED_EDGE('',*,*,#5324,.T.);+#5324 = EDGE_CURVE('',#5298,#5325,#5327,.T.);+#5325 = VERTEX_POINT('',#5326);+#5326 = CARTESIAN_POINT('',(-0.551485956294,0.154416067762,1.75));+#5327 = SURFACE_CURVE('',#5328,(#5332,#5339),.PCURVE_S1.);+#5328 = LINE('',#5329,#5330);+#5329 = CARTESIAN_POINT('',(-1.115785798338,0.154416067762,1.75));+#5330 = VECTOR('',#5331,1.);+#5331 = DIRECTION('',(-1.,-0.,-0.));+#5332 = PCURVE('',#2438,#5333);+#5333 = DEFINITIONAL_REPRESENTATION('',(#5334),#5338);+#5334 = LINE('',#5335,#5336);+#5335 = CARTESIAN_POINT('',(2.026635501514,0.803360362988));+#5336 = VECTOR('',#5337,1.);+#5337 = DIRECTION('',(-0.596575959062,0.802556617983));+#5338 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5339 = PCURVE('',#5340,#5345);+#5340 = PLANE('',#5341);+#5341 = AXIS2_PLACEMENT_3D('',#5342,#5343,#5344);+#5342 = CARTESIAN_POINT('',(-0.551485956294,0.154416067762,1.8000001));+#5343 = DIRECTION('',(0.,-1.,0.));+#5344 = DIRECTION('',(1.,0.,0.));+#5345 = DEFINITIONAL_REPRESENTATION('',(#5346),#5349);+#5346 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5347,#5348),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.602706899714,-0.564299842044),.PIECEWISE_BEZIER_KNOTS.);+#5347 = CARTESIAN_POINT('',(3.84070576705E-02,-5.00001E-02));+#5348 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5349 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5350 = ORIENTED_EDGE('',*,*,#5351,.T.);+#5351 = EDGE_CURVE('',#5325,#5352,#5354,.T.);+#5352 = VERTEX_POINT('',#5353);+#5353 = CARTESIAN_POINT('',(-0.551485956294,-8.764687519678E-02,1.75));+#5354 = SURFACE_CURVE('',#5355,(#5359,#5366),.PCURVE_S1.);+#5355 = LINE('',#5356,#5357);+#5356 = CARTESIAN_POINT('',(-0.551485956294,1.086262202784,1.75));+#5357 = VECTOR('',#5358,1.);+#5358 = DIRECTION('',(0.,-1.,0.));+#5359 = PCURVE('',#2438,#5360);+#5360 = DEFINITIONAL_REPRESENTATION('',(#5361),#5365);+#5361 = LINE('',#5362,#5363);+#5362 = CARTESIAN_POINT('',(1.615423938376,-0.20543921147));+#5363 = VECTOR('',#5364,1.);+#5364 = DIRECTION('',(0.802556617983,0.596575959062));+#5365 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5366 = PCURVE('',#5367,#5372);+#5367 = PLANE('',#5368);+#5368 = AXIS2_PLACEMENT_3D('',#5369,#5370,#5371);+#5369 = CARTESIAN_POINT('',(-0.551485956294,-8.764687519678E-02,+ 1.8000001));+#5370 = DIRECTION('',(1.,0.,0.));+#5371 = DIRECTION('',(0.,1.,0.));+#5372 = DEFINITIONAL_REPRESENTATION('',(#5373),#5376);+#5373 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5374,#5375),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.931846135022,1.173909077981),.PIECEWISE_BEZIER_KNOTS.);+#5374 = CARTESIAN_POINT('',(0.242062942959,-5.00001E-02));+#5375 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5376 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5377 = ORIENTED_EDGE('',*,*,#5378,.T.);+#5378 = EDGE_CURVE('',#5352,#5134,#5379,.T.);+#5379 = SURFACE_CURVE('',#5380,(#5384,#5391),.PCURVE_S1.);+#5380 = LINE('',#5381,#5382);+#5381 = CARTESIAN_POINT('',(-1.094460847245,1.236393087062,1.75));+#5382 = VECTOR('',#5383,1.);+#5383 = DIRECTION('',(-0.379424173637,0.92522283611,0.));+#5384 = PCURVE('',#2438,#5385);+#5385 = DEFINITIONAL_REPRESENTATION('',(#5386),#5390);+#5386 = LINE('',#5387,#5388);+#5387 = CARTESIAN_POINT('',(1.17100963732,0.140764404388));+#5388 = VECTOR('',#5389,1.);+#5389 = DIRECTION('',(-0.968899050508,-0.247456319224));+#5390 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5391 = PCURVE('',#5392,#5397);+#5392 = PLANE('',#5393);+#5393 = AXIS2_PLACEMENT_3D('',#5394,#5395,#5396);+#5394 = CARTESIAN_POINT('',(-0.650753428427,0.154416067762,1.8000001));+#5395 = DIRECTION('',(-0.92522283611,-0.379424173637,0.));+#5396 = DIRECTION('',(0.379424173637,-0.92522283611,0.));+#5397 = DEFINITIONAL_REPRESENTATION('',(#5398),#5401);+#5398 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5399,#5400),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-1.431049808308,-1.169423167123),.PIECEWISE_BEZIER_KNOTS.);+#5399 = CARTESIAN_POINT('',(0.261626641185,-5.00001E-02));+#5400 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5401 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5402 = FACE_BOUND('',#5403,.F.);+#5403 = EDGE_LOOP('',(#5404,#5442,#5469,#5505,#5541,#5577,#5622,#5658,+ #5694,#5721,#5757,#5793,#5838,#5874,#5910,#5946,#5973,#6009,#6045,+ #6081,#6126,#6162,#6198,#6225,#6261,#6297,#6342,#6378));+#5404 = ORIENTED_EDGE('',*,*,#5405,.T.);+#5405 = EDGE_CURVE('',#5406,#5408,#5410,.T.);+#5406 = VERTEX_POINT('',#5407);+#5407 = CARTESIAN_POINT('',(-0.808419324147,0.121523869655,1.75));+#5408 = VERTEX_POINT('',#5409);+#5409 = CARTESIAN_POINT('',(-0.772080338812,0.103994494616,1.75));+#5410 = SURFACE_CURVE('',#5411,(#5417,#5426),.PCURVE_S1.);+#5411 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5412,#5413,#5414,#5415,#5416),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5412 = CARTESIAN_POINT('',(-0.808419324147,0.121523869655,1.75));+#5413 = CARTESIAN_POINT('',(-0.799309178717,0.118569227894,1.75));+#5414 = CARTESIAN_POINT('',(-0.790215836987,0.114662579163,1.75));+#5415 = CARTESIAN_POINT('',(-0.781139493693,0.109804170028,1.75));+#5416 = CARTESIAN_POINT('',(-0.772080338812,0.103994494616,1.75));+#5417 = PCURVE('',#2438,#5418);+#5418 = DEFINITIONAL_REPRESENTATION('',(#5419),#5425);+#5419 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5420,#5421,#5422,#5423,#5424),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5420 = CARTESIAN_POINT('',(2.23640080191,0.576304059611));+#5421 = CARTESIAN_POINT('',(2.244206962956,0.570755320348));+#5422 = CARTESIAN_POINT('',(2.252767138813,0.565788011476));+#5423 = CARTESIAN_POINT('',(2.262081015422,0.561402142188));+#5424 = CARTESIAN_POINT('',(2.272148082884,0.557597570166));+#5425 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5426 = PCURVE('',#5427,#5434);+#5427 = SURFACE_OF_LINEAR_EXTRUSION('',#5428,#5432);+#5428 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5429,#5430,#5431),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5429 = CARTESIAN_POINT('',(-0.772080338812,0.103994494616,1.8000001));+#5430 = CARTESIAN_POINT('',(-0.790200591662,0.115615091552,1.8000001));+#5431 = CARTESIAN_POINT('',(-0.808419324147,0.121523869655,1.8000001));+#5432 = VECTOR('',#5433,1.);+#5433 = DIRECTION('',(0.,0.,1.));+#5434 = DEFINITIONAL_REPRESENTATION('',(#5435),#5441);+#5435 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5436,#5437,#5438,#5439,#5440),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5436 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#5437 = CARTESIAN_POINT('',(0.749978615775,-5.00001E-02));+#5438 = CARTESIAN_POINT('',(0.499967869447,-5.00001E-02));+#5439 = CARTESIAN_POINT('',(0.249973191768,-5.00001E-02));+#5440 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5441 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5442 = ORIENTED_EDGE('',*,*,#5443,.T.);+#5443 = EDGE_CURVE('',#5408,#5444,#5446,.T.);+#5444 = VERTEX_POINT('',#5445);+#5445 = CARTESIAN_POINT('',(-0.772080338812,0.144371144987,1.75));+#5446 = SURFACE_CURVE('',#5447,(#5451,#5458),.PCURVE_S1.);+#5447 = LINE('',#5448,#5449);+#5448 = CARTESIAN_POINT('',(-0.772080338812,1.202271212876,1.75));+#5449 = VECTOR('',#5450,1.);+#5450 = DIRECTION('',(0.,1.,0.));+#5451 = PCURVE('',#2438,#5452);+#5452 = DEFINITIONAL_REPRESENTATION('',(#5453),#5457);+#5453 = LINE('',#5454,#5455);+#5454 = CARTESIAN_POINT('',(1.390718834267,-9.760791634598E-02));+#5455 = VECTOR('',#5456,1.);+#5456 = DIRECTION('',(-0.802556617983,-0.596575959062));+#5457 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5458 = PCURVE('',#5459,#5464);+#5459 = PLANE('',#5460);+#5460 = AXIS2_PLACEMENT_3D('',#5461,#5462,#5463);+#5461 = CARTESIAN_POINT('',(-0.772080338812,0.144371144987,1.8000001));+#5462 = DIRECTION('',(-1.,0.,0.));+#5463 = DIRECTION('',(0.,-1.,0.));+#5464 = DEFINITIONAL_REPRESENTATION('',(#5465),#5468);+#5465 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5466,#5467),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-1.098276718261,-1.057900067889),.PIECEWISE_BEZIER_KNOTS.);+#5466 = CARTESIAN_POINT('',(4.037665037155E-02,-5.00001E-02));+#5467 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5468 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5469 = ORIENTED_EDGE('',*,*,#5470,.T.);+#5470 = EDGE_CURVE('',#5444,#5471,#5473,.T.);+#5471 = VERTEX_POINT('',#5472);+#5472 = CARTESIAN_POINT('',(-0.811472192833,0.155893262288,1.75));+#5473 = SURFACE_CURVE('',#5474,(#5480,#5489),.PCURVE_S1.);+#5474 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5475,#5476,#5477,#5478,#5479),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5475 = CARTESIAN_POINT('',(-0.772080338812,0.144371144987,1.75));+#5476 = CARTESIAN_POINT('',(-0.782419378881,0.14821135987,1.75));+#5477 = CARTESIAN_POINT('',(-0.79243120362,0.151411979628,1.75));+#5478 = CARTESIAN_POINT('',(-0.802115547393,0.153972687698,1.75));+#5479 = CARTESIAN_POINT('',(-0.811472192833,0.155893262288,1.75));+#5480 = PCURVE('',#2438,#5481);+#5481 = DEFINITIONAL_REPRESENTATION('',(#5482),#5488);+#5482 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5483,#5484,#5485,#5486,#5487),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5483 = CARTESIAN_POINT('',(2.239743534916,0.533509831247));+#5484 = CARTESIAN_POINT('',(2.230493522303,0.539516516401));+#5485 = CARTESIAN_POINT('',(2.221952029789,0.545642159802));+#5486 = CARTESIAN_POINT('',(2.214119469907,0.551886737115));+#5487 = CARTESIAN_POINT('',(2.206996150331,0.558250206207));+#5488 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5489 = PCURVE('',#5490,#5497);+#5490 = SURFACE_OF_LINEAR_EXTRUSION('',#5491,#5495);+#5491 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5492,#5493,#5494),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5492 = CARTESIAN_POINT('',(-0.811472192833,0.155893262288,1.8000001));+#5493 = CARTESIAN_POINT('',(-0.792761062173,0.152052556521,1.8000001));+#5494 = CARTESIAN_POINT('',(-0.772080338812,0.144371144987,1.8000001));+#5495 = VECTOR('',#5496,1.);+#5496 = DIRECTION('',(0.,0.,1.));+#5497 = DEFINITIONAL_REPRESENTATION('',(#5498),#5504);+#5498 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5499,#5500,#5501,#5502,#5503),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5499 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#5500 = CARTESIAN_POINT('',(0.750031952737,-5.00001E-02));+#5501 = CARTESIAN_POINT('',(0.500040545325,-5.00001E-02));+#5502 = CARTESIAN_POINT('',(0.250028862784,-5.00001E-02));+#5503 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5504 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5505 = ORIENTED_EDGE('',*,*,#5506,.T.);+#5506 = EDGE_CURVE('',#5471,#5507,#5509,.T.);+#5507 = VERTEX_POINT('',#5508);+#5508 = CARTESIAN_POINT('',(-0.847121820722,0.159733968055,1.75));+#5509 = SURFACE_CURVE('',#5510,(#5516,#5525),.PCURVE_S1.);+#5510 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5511,#5512,#5513,#5514,#5515),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5511 = CARTESIAN_POINT('',(-0.811472192833,0.155893262288,1.75));+#5512 = CARTESIAN_POINT('',(-0.820826974247,0.157813454263,1.75));+#5513 = CARTESIAN_POINT('',(-0.829886963043,0.159093758378,1.75));+#5514 = CARTESIAN_POINT('',(-0.838651963218,0.159733968055,1.75));+#5515 = CARTESIAN_POINT('',(-0.847121820722,0.159733968055,1.75));+#5516 = PCURVE('',#2438,#5517);+#5517 = DEFINITIONAL_REPRESENTATION('',(#5518),#5524);+#5518 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5519,#5520,#5521,#5522,#5523),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5519 = CARTESIAN_POINT('',(2.206996150331,0.558250206207));+#5520 = CARTESIAN_POINT('',(2.199874249861,0.564612407571));+#5521 = CARTESIAN_POINT('',(2.193441761815,0.571119762883));+#5522 = CARTESIAN_POINT('',(2.187698968916,0.577772238078));+#5523 = CARTESIAN_POINT('',(2.182646055552,0.584569778271));+#5524 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5525 = PCURVE('',#5526,#5533);+#5526 = SURFACE_OF_LINEAR_EXTRUSION('',#5527,#5531);+#5527 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5528,#5529,#5530),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5528 = CARTESIAN_POINT('',(-0.847121820722,0.159733968055,1.8000001));+#5529 = CARTESIAN_POINT('',(-0.830183323493,0.159733968055,1.8000001));+#5530 = CARTESIAN_POINT('',(-0.811472192833,0.155893262288,1.8000001));+#5531 = VECTOR('',#5532,1.);+#5532 = DIRECTION('',(0.,0.,1.));+#5533 = DEFINITIONAL_REPRESENTATION('',(#5534),#5540);+#5534 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5535,#5536,#5537,#5538,#5539),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5535 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#5536 = CARTESIAN_POINT('',(0.750020947859,-5.00001E-02));+#5537 = CARTESIAN_POINT('',(0.500025948611,-5.00001E-02));+#5538 = CARTESIAN_POINT('',(0.250017973532,-5.00001E-02));+#5539 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5540 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5541 = ORIENTED_EDGE('',*,*,#5542,.T.);+#5542 = EDGE_CURVE('',#5507,#5543,#5545,.T.);+#5543 = VERTEX_POINT('',#5544);+#5544 = CARTESIAN_POINT('',(-0.917534759785,0.136000376008,1.75));+#5545 = SURFACE_CURVE('',#5546,(#5552,#5561),.PCURVE_S1.);+#5546 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5547,#5548,#5549,#5550,#5551),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5547 = CARTESIAN_POINT('',(-0.847121820722,0.159733968055,1.75));+#5548 = CARTESIAN_POINT('',(-0.869061994252,0.159733968055,1.75));+#5549 = CARTESIAN_POINT('',(-0.888124741732,0.155785864925,1.75));+#5550 = CARTESIAN_POINT('',(-0.904284309695,0.147871597091,1.75));+#5551 = CARTESIAN_POINT('',(-0.917534759785,0.136000376008,1.75));+#5552 = PCURVE('',#2438,#5553);+#5553 = DEFINITIONAL_REPRESENTATION('',(#5554),#5560);+#5554 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5555,#5556,#5557,#5558,#5559),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5555 = CARTESIAN_POINT('',(2.182646055552,0.584569778271));+#5556 = CARTESIAN_POINT('',(2.169557075487,0.602178009737));+#5557 = CARTESIAN_POINT('',(2.161353274922,0.619832287296));+#5558 = CARTESIAN_POINT('',(2.158064513193,0.637522717432));+#5559 = CARTESIAN_POINT('',(2.159686940267,0.655239038945));+#5560 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5561 = PCURVE('',#5562,#5569);+#5562 = SURFACE_OF_LINEAR_EXTRUSION('',#5563,#5567);+#5563 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5564,#5565,#5566),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5564 = CARTESIAN_POINT('',(-0.917534759785,0.136000376008,1.8000001));+#5565 = CARTESIAN_POINT('',(-0.891043737956,0.159733968055,1.8000001));+#5566 = CARTESIAN_POINT('',(-0.847121820722,0.159733968055,1.8000001));+#5567 = VECTOR('',#5568,1.);+#5568 = DIRECTION('',(0.,0.,1.));+#5569 = DEFINITIONAL_REPRESENTATION('',(#5570),#5576);+#5570 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5571,#5572,#5573,#5574,#5575),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5571 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#5572 = CARTESIAN_POINT('',(0.750236614072,-5.00001E-02));+#5573 = CARTESIAN_POINT('',(0.500220300213,-5.00001E-02));+#5574 = CARTESIAN_POINT('',(0.250093223563,-5.00001E-02));+#5575 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5576 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5577 = ORIENTED_EDGE('',*,*,#5578,.T.);+#5578 = EDGE_CURVE('',#5543,#5579,#5581,.T.);+#5579 = VERTEX_POINT('',#5580);+#5580 = CARTESIAN_POINT('',(-0.944025781614,7.28749299389E-02,1.75));+#5581 = SURFACE_CURVE('',#5582,(#5591,#5603),.PCURVE_S1.);+#5582 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5583,#5584,#5585,#5586,#5587,+ #5588,#5589,#5590),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.347956955149,+ 1.),.UNSPECIFIED.);+#5583 = CARTESIAN_POINT('',(-0.917534759785,0.136000376008,1.75));+#5584 = CARTESIAN_POINT('',(-0.922143494307,0.131871361064,1.75));+#5585 = CARTESIAN_POINT('',(-0.926218399623,0.127425766932,1.75));+#5586 = CARTESIAN_POINT('',(-0.929758758866,0.122663690415,1.75));+#5587 = CARTESIAN_POINT('',(-0.938396561214,0.108069435133,1.75));+#5588 = CARTESIAN_POINT('',(-0.942150876217,9.744335614273E-02,1.75));+#5589 = CARTESIAN_POINT('',(-0.944025781614,8.570983180824E-02,1.75));+#5590 = CARTESIAN_POINT('',(-0.944025781614,7.28749299389E-02,1.75));+#5591 = PCURVE('',#2438,#5592);+#5592 = DEFINITIONAL_REPRESENTATION('',(#5593),#5602);+#5593 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5594,#5595,#5596,#5597,#5598,+ #5599,#5600,#5601),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.347956955149,+ 1.),.UNSPECIFIED.);+#5594 = CARTESIAN_POINT('',(2.159686940267,0.655239038945));+#5595 = CARTESIAN_POINT('',(2.160251248318,0.661401080387));+#5596 = CARTESIAN_POINT('',(2.161388098763,0.667323557199));+#5597 = CARTESIAN_POINT('',(2.163097841576,0.673005836304));+#5598 = CARTESIAN_POINT('',(2.169657452517,0.688644743585));+#5599 = CARTESIAN_POINT('',(2.17594574846,0.697997057201));+#5600 = CARTESIAN_POINT('',(2.184244042582,0.706501713469));+#5601 = CARTESIAN_POINT('',(2.194544778018,0.714158707361));+#5602 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5603 = PCURVE('',#5604,#5611);+#5604 = SURFACE_OF_LINEAR_EXTRUSION('',#5605,#5609);+#5605 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5606,#5607,#5608),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5606 = CARTESIAN_POINT('',(-0.944025781614,7.28749299389E-02,1.8000001)+ );+#5607 = CARTESIAN_POINT('',(-0.944025781614,0.11226678396,1.8000001));+#5608 = CARTESIAN_POINT('',(-0.917534759785,0.136000376008,1.8000001));+#5609 = VECTOR('',#5610,1.);+#5610 = DIRECTION('',(0.,0.,1.));+#5611 = DEFINITIONAL_REPRESENTATION('',(#5612),#5621);+#5612 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5613,#5614,#5615,#5616,#5617,+ #5618,#5619,#5620),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.347956955149,+ 1.),.UNSPECIFIED.);+#5613 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#5614 = CARTESIAN_POINT('',(0.913013273861,-5.00001E-02));+#5615 = CARTESIAN_POINT('',(0.826013290492,-5.00001E-02));+#5616 = CARTESIAN_POINT('',(0.739006656953,-5.00001E-02));+#5617 = CARTESIAN_POINT('',(0.48895659856,-5.00001E-02));+#5618 = CARTESIAN_POINT('',(0.325913089137,-5.00001E-02));+#5619 = CARTESIAN_POINT('',(0.16291314776,-5.00001E-02));+#5620 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5621 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5622 = ORIENTED_EDGE('',*,*,#5623,.T.);+#5623 = EDGE_CURVE('',#5579,#5624,#5626,.T.);+#5624 = VERTEX_POINT('',#5625);+#5625 = CARTESIAN_POINT('',(-0.925511610224,2.265031606209E-02,1.75));+#5626 = SURFACE_CURVE('',#5627,(#5633,#5642),.PCURVE_S1.);+#5627 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5628,#5629,#5630,#5631,#5632),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5628 = CARTESIAN_POINT('',(-0.944025781614,7.28749299389E-02,1.75));+#5629 = CARTESIAN_POINT('',(-0.944025781614,5.712555331985E-02,1.75));+#5630 = CARTESIAN_POINT('',(-0.940942972734,4.349946817063E-02,1.75));+#5631 = CARTESIAN_POINT('',(-0.934769907684,3.200710604798E-02,1.75));+#5632 = CARTESIAN_POINT('',(-0.925511610224,2.265031606209E-02,1.75));+#5633 = PCURVE('',#2438,#5634);+#5634 = DEFINITIONAL_REPRESENTATION('',(#5635),#5641);+#5635 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5636,#5637,#5638,#5639,#5640),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5636 = CARTESIAN_POINT('',(2.194544778018,0.714158707361));+#5637 = CARTESIAN_POINT('',(2.207184544453,0.723554406822));+#5638 = CARTESIAN_POINT('',(2.219959378931,0.72920927297));+#5639 = CARTESIAN_POINT('',(2.232865352411,0.731111105716));+#5640 = CARTESIAN_POINT('',(2.245897983824,0.729262833778));+#5641 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5642 = PCURVE('',#5643,#5650);+#5643 = SURFACE_OF_LINEAR_EXTRUSION('',#5644,#5648);+#5644 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5645,#5646,#5647),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5645 = CARTESIAN_POINT('',(-0.925511610224,2.265031606209E-02,1.8000001+ ));+#5646 = CARTESIAN_POINT('',(-0.944025781614,4.136144672208E-02,1.8000001+ ));+#5647 = CARTESIAN_POINT('',(-0.944025781614,7.28749299389E-02,1.8000001)+ );+#5648 = VECTOR('',#5649,1.);+#5649 = DIRECTION('',(0.,0.,1.));+#5650 = DEFINITIONAL_REPRESENTATION('',(#5651),#5657);+#5651 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5652,#5653,#5654,#5655,#5656),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5652 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#5653 = CARTESIAN_POINT('',(0.750116854575,-5.00001E-02));+#5654 = CARTESIAN_POINT('',(0.500099828755,-5.00001E-02));+#5655 = CARTESIAN_POINT('',(0.250032725331,-5.00001E-02));+#5656 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5657 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5658 = ORIENTED_EDGE('',*,*,#5659,.T.);+#5659 = EDGE_CURVE('',#5624,#5660,#5662,.T.);+#5660 = VERTEX_POINT('',#5661);+#5661 = CARTESIAN_POINT('',(-0.866029910652,-5.317900292839E-03,1.75));+#5662 = SURFACE_CURVE('',#5663,(#5669,#5678),.PCURVE_S1.);+#5663 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5664,#5665,#5666,#5667,#5668),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5664 = CARTESIAN_POINT('',(-0.925511610224,2.265031606209E-02,1.75));+#5665 = CARTESIAN_POINT('',(-0.916246468325,1.328660882364E-02,1.75));+#5666 = CARTESIAN_POINT('',(-0.90323551453,5.504297490486E-03,1.75));+#5667 = CARTESIAN_POINT('',(-0.886487841762,-6.951947056106E-04,1.75));+#5668 = CARTESIAN_POINT('',(-0.866029910652,-5.317900292839E-03,1.75));+#5669 = PCURVE('',#2438,#5670);+#5670 = DEFINITIONAL_REPRESENTATION('',(#5671),#5677);+#5671 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5672,#5673,#5674,#5675,#5676),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5672 = CARTESIAN_POINT('',(2.245897983824,0.729262833778));+#5673 = CARTESIAN_POINT('',(2.258940249951,0.727413195456));+#5674 = CARTESIAN_POINT('',(2.272948017654,0.721613908229));+#5675 = CARTESIAN_POINT('',(2.287914720087,0.711871420616));+#5676 = CARTESIAN_POINT('',(2.303829412921,0.698210567633));+#5677 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5678 = PCURVE('',#5679,#5686);+#5679 = SURFACE_OF_LINEAR_EXTRUSION('',#5680,#5684);+#5680 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5681,#5682,#5683),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5681 = CARTESIAN_POINT('',(-0.866029910652,-5.317900292839E-03,+ 1.8000001));+#5682 = CARTESIAN_POINT('',(-0.906997438834,3.939185402103E-03,1.8000001+ ));+#5683 = CARTESIAN_POINT('',(-0.925511610224,2.265031606209E-02,1.8000001+ ));+#5684 = VECTOR('',#5685,1.);+#5685 = DIRECTION('',(0.,0.,1.));+#5686 = DEFINITIONAL_REPRESENTATION('',(#5687),#5693);+#5687 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5688,#5689,#5690,#5691,#5692),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5688 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#5689 = CARTESIAN_POINT('',(0.749782431415,-5.00001E-02));+#5690 = CARTESIAN_POINT('',(0.499644313864,-5.00001E-02));+#5691 = CARTESIAN_POINT('',(0.249684713935,-5.00001E-02));+#5692 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5693 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5694 = ORIENTED_EDGE('',*,*,#5695,.T.);+#5695 = EDGE_CURVE('',#5660,#5696,#5698,.T.);+#5696 = VERTEX_POINT('',#5697);+#5697 = CARTESIAN_POINT('',(-0.844758309481,-1.024188204547E-02,1.75));+#5698 = SURFACE_CURVE('',#5699,(#5703,#5710),.PCURVE_S1.);+#5699 = LINE('',#5700,#5701);+#5700 = CARTESIAN_POINT('',(-1.490594973458,0.139257345727,1.75));+#5701 = VECTOR('',#5702,1.);+#5702 = DIRECTION('',(0.97423893818,-0.225518272727,0.));+#5703 = PCURVE('',#2438,#5704);+#5704 = DEFINITIONAL_REPRESENTATION('',(#5705),#5709);+#5705 = LINE('',#5706,#5707);+#5706 = CARTESIAN_POINT('',(1.815199091092,1.113209276098));+#5707 = VECTOR('',#5708,1.);+#5708 = DIRECTION('',(0.762198711154,-0.647343127495));+#5709 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5710 = PCURVE('',#5711,#5716);+#5711 = PLANE('',#5712);+#5712 = AXIS2_PLACEMENT_3D('',#5713,#5714,#5715);+#5713 = CARTESIAN_POINT('',(-0.844758309481,-1.024188204547E-02,+ 1.8000001));+#5714 = DIRECTION('',(0.225518272727,0.97423893818,0.));+#5715 = DIRECTION('',(-0.97423893818,0.225518272727,0.));+#5716 = DEFINITIONAL_REPRESENTATION('',(#5717),#5720);+#5717 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5718,#5719),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.641079963373,0.662914033372),.PIECEWISE_BEZIER_KNOTS.);+#5718 = CARTESIAN_POINT('',(2.183406999836E-02,-5.00001E-02));+#5719 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5720 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5721 = ORIENTED_EDGE('',*,*,#5722,.T.);+#5722 = EDGE_CURVE('',#5696,#5723,#5725,.T.);+#5723 = VERTEX_POINT('',#5724);+#5724 = CARTESIAN_POINT('',(-0.804677098015,-2.816517562503E-02,1.75));+#5725 = SURFACE_CURVE('',#5726,(#5732,#5741),.PCURVE_S1.);+#5726 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5727,#5728,#5729,#5730,#5731),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5727 = CARTESIAN_POINT('',(-0.844758309481,-1.024188204547E-02,1.75));+#5728 = CARTESIAN_POINT('',(-0.830488639188,-1.339105066183E-02,1.75));+#5729 = CARTESIAN_POINT('',(-0.819045950059,-1.742720425416E-02,1.75));+#5730 = CARTESIAN_POINT('',(-0.810440925803,-2.23520843512E-02,1.75));+#5731 = CARTESIAN_POINT('',(-0.804677098015,-2.816517562503E-02,1.75));+#5732 = PCURVE('',#2438,#5733);+#5733 = DEFINITIONAL_REPRESENTATION('',(#5734),#5740);+#5734 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5735,#5736,#5737,#5738,#5739),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5735 = CARTESIAN_POINT('',(2.320471312933,0.684076432474));+#5736 = CARTESIAN_POINT('',(2.331511641288,0.674502932432));+#5737 = CARTESIAN_POINT('',(2.341577316306,0.667727398744));+#5738 = CARTESIAN_POINT('',(2.350663362019,0.663759444647));+#5739 = CARTESIAN_POINT('',(2.358767257983,0.662601597012));+#5740 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5741 = PCURVE('',#5742,#5749);+#5742 = SURFACE_OF_LINEAR_EXTRUSION('',#5743,#5747);+#5743 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5744,#5745,#5746),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5744 = CARTESIAN_POINT('',(-0.804677098015,-2.816517562503E-02,+ 1.8000001));+#5745 = CARTESIAN_POINT('',(-0.816199215316,-1.654457868883E-02,+ 1.8000001));+#5746 = CARTESIAN_POINT('',(-0.844758309481,-1.024188204547E-02,+ 1.8000001));+#5747 = VECTOR('',#5748,1.);+#5748 = DIRECTION('',(0.,0.,1.));+#5749 = DEFINITIONAL_REPRESENTATION('',(#5750),#5756);+#5750 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5751,#5752,#5753,#5754,#5755),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5751 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#5752 = CARTESIAN_POINT('',(0.75017291847,-5.00001E-02));+#5753 = CARTESIAN_POINT('',(0.500195523421,-5.00001E-02));+#5754 = CARTESIAN_POINT('',(0.250120166191,-5.00001E-02));+#5755 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5756 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5757 = ORIENTED_EDGE('',*,*,#5758,.T.);+#5758 = EDGE_CURVE('',#5723,#5759,#5761,.T.);+#5759 = VERTEX_POINT('',#5760);+#5760 = CARTESIAN_POINT('',(-0.793154980713,-6.184521081301E-02,1.75));+#5761 = SURFACE_CURVE('',#5762,(#5768,#5777),.PCURVE_S1.);+#5762 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5763,#5764,#5765,#5766,#5767),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5763 = CARTESIAN_POINT('',(-0.804677098015,-2.816517562503E-02,1.75));+#5764 = CARTESIAN_POINT('',(-0.79891524393,-3.397627632616E-02,1.75));+#5765 = CARTESIAN_POINT('',(-0.795074185349,-4.152775375974E-02,1.75));+#5766 = CARTESIAN_POINT('',(-0.793154980713,-5.081878822204E-02,1.75));+#5767 = CARTESIAN_POINT('',(-0.793154980713,-6.184521081301E-02,1.75));+#5768 = PCURVE('',#2438,#5769);+#5769 = DEFINITIONAL_REPRESENTATION('',(#5770),#5776);+#5770 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5771,#5772,#5773,#5774,#5775),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5771 = CARTESIAN_POINT('',(2.358767257983,0.662601597012));+#5772 = CARTESIAN_POINT('',(2.366868378935,0.661444145858));+#5773 = CARTESIAN_POINT('',(2.375220350331,0.662866508767));+#5774 = CARTESIAN_POINT('',(2.383821882873,0.66686904618));+#5775 = CARTESIAN_POINT('',(2.392671211296,0.673447144812));+#5776 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5777 = PCURVE('',#5778,#5785);+#5778 = SURFACE_OF_LINEAR_EXTRUSION('',#5779,#5783);+#5779 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5780,#5781,#5782),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5780 = CARTESIAN_POINT('',(-0.793154980713,-6.184521081301E-02,+ 1.8000001));+#5781 = CARTESIAN_POINT('',(-0.793154980713,-3.978577256124E-02,+ 1.8000001));+#5782 = CARTESIAN_POINT('',(-0.804677098015,-2.816517562503E-02,+ 1.8000001));+#5783 = VECTOR('',#5784,1.);+#5784 = DIRECTION('',(0.,0.,1.));+#5785 = DEFINITIONAL_REPRESENTATION('',(#5786),#5792);+#5786 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5787,#5788,#5789,#5790,#5791),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5787 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#5788 = CARTESIAN_POINT('',(0.74996548228,-5.00001E-02));+#5789 = CARTESIAN_POINT('',(0.499927137644,-5.00001E-02));+#5790 = CARTESIAN_POINT('',(0.249925280624,-5.00001E-02));+#5791 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5792 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5793 = ORIENTED_EDGE('',*,*,#5794,.T.);+#5794 = EDGE_CURVE('',#5759,#5795,#5797,.T.);+#5795 = VERTEX_POINT('',#5796);+#5796 = CARTESIAN_POINT('',(-0.809896518672,-9.956291103814E-02,1.75));+#5797 = SURFACE_CURVE('',#5798,(#5807,#5819),.PCURVE_S1.);+#5798 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5799,#5800,#5801,#5802,#5803,+ #5804,#5805,#5806),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.657018712495,+ 1.),.UNSPECIFIED.);+#5799 = CARTESIAN_POINT('',(-0.793154980713,-6.184521081301E-02,1.75));+#5800 = CARTESIAN_POINT('',(-0.793154980713,-6.98016389645E-02,1.75));+#5801 = CARTESIAN_POINT('',(-0.794358844203,-7.698798619792E-02,1.75));+#5802 = CARTESIAN_POINT('',(-0.796767803322,-8.340256109844E-02,1.75));+#5803 = CARTESIAN_POINT('',(-0.802267868147,-9.199007837489E-02,1.75));+#5804 = CARTESIAN_POINT('',(-0.804482578751,-9.472494384891E-02,1.75));+#5805 = CARTESIAN_POINT('',(-0.807025522323,-9.724922574481E-02,1.75));+#5806 = CARTESIAN_POINT('',(-0.809896518672,-9.956291103815E-02,1.75));+#5807 = PCURVE('',#2438,#5808);+#5808 = DEFINITIONAL_REPRESENTATION('',(#5809),#5818);+#5809 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5810,#5811,#5812,#5813,#5814,+ #5815,#5816,#5817),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.657018712495,+ 1.),.UNSPECIFIED.);+#5810 = CARTESIAN_POINT('',(2.392671211296,0.673447144812));+#5811 = CARTESIAN_POINT('',(2.399056695365,0.678193758567));+#5812 = CARTESIAN_POINT('',(2.40410594988,0.683447129171));+#5813 = CARTESIAN_POINT('',(2.407816882321,0.689207236428));+#5814 = CARTESIAN_POINT('',(2.411427644696,0.698744456207));+#5815 = CARTESIAN_POINT('',(2.412301285979,0.702153441852));+#5816 = CARTESIAN_POINT('',(2.412810106119,0.705700223939));+#5817 = CARTESIAN_POINT('',(2.412954202163,0.709384650082));+#5818 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5819 = PCURVE('',#5820,#5827);+#5820 = SURFACE_OF_LINEAR_EXTRUSION('',#5821,#5825);+#5821 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5822,#5823,#5824),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5822 = CARTESIAN_POINT('',(-0.809896518672,-9.956291103814E-02,+ 1.8000001));+#5823 = CARTESIAN_POINT('',(-0.793154980713,-8.607120103594E-02,+ 1.8000001));+#5824 = CARTESIAN_POINT('',(-0.793154980713,-6.184521081301E-02,+ 1.8000001));+#5825 = VECTOR('',#5826,1.);+#5826 = DIRECTION('',(0.,0.,1.));+#5827 = DEFINITIONAL_REPRESENTATION('',(#5828),#5837);+#5828 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5829,#5830,#5831,#5832,#5833,+ #5834,#5835,#5836),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.657018712495,+ 1.),.UNSPECIFIED.);+#5829 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#5830 = CARTESIAN_POINT('',(0.835787349077,-5.00001E-02));+#5831 = CARTESIAN_POINT('',(0.671537382336,-5.00001E-02));+#5832 = CARTESIAN_POINT('',(0.507268703678,-5.00001E-02));+#5833 = CARTESIAN_POINT('',(0.257247356411,-5.00001E-02));+#5834 = CARTESIAN_POINT('',(0.171494704731,-5.00001E-02));+#5835 = CARTESIAN_POINT('',(8.57447014856E-02,-5.00001E-02));+#5836 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5837 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5838 = ORIENTED_EDGE('',*,*,#5839,.T.);+#5839 = EDGE_CURVE('',#5795,#5840,#5842,.T.);+#5840 = VERTEX_POINT('',#5841);+#5841 = CARTESIAN_POINT('',(-0.856772824957,-0.11305462104,1.75));+#5842 = SURFACE_CURVE('',#5843,(#5849,#5858),.PCURVE_S1.);+#5843 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5844,#5845,#5846,#5847,#5848),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5844 = CARTESIAN_POINT('',(-0.809896518672,-9.956291103815E-02,1.75));+#5845 = CARTESIAN_POINT('',(-0.818270005005,-0.106310955906,1.75));+#5846 = CARTESIAN_POINT('',(-0.828876678156,-0.110808542201,1.75));+#5847 = CARTESIAN_POINT('',(-0.841713945281,-0.11305462104,1.75));+#5848 = CARTESIAN_POINT('',(-0.856772824957,-0.11305462104,1.75));+#5849 = PCURVE('',#2438,#5850);+#5850 = DEFINITIONAL_REPRESENTATION('',(#5851),#5857);+#5851 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5852,#5853,#5854,#5855,#5856),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5852 = CARTESIAN_POINT('',(2.412954202163,0.709384650082));+#5853 = CARTESIAN_POINT('',(2.413374469591,0.720130568292));+#5854 = CARTESIAN_POINT('',(2.410656351029,0.731326175883));+#5855 = CARTESIAN_POINT('',(2.404800551519,0.742968766208));+#5856 = CARTESIAN_POINT('',(2.395816785934,0.755054369751));+#5857 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5858 = PCURVE('',#5859,#5866);+#5859 = SURFACE_OF_LINEAR_EXTRUSION('',#5860,#5864);+#5860 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5861,#5862,#5863),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5861 = CARTESIAN_POINT('',(-0.856772824957,-0.11305462104,1.8000001));+#5862 = CARTESIAN_POINT('',(-0.826638056631,-0.11305462104,1.8000001));+#5863 = CARTESIAN_POINT('',(-0.809896518672,-9.956291103814E-02,+ 1.8000001));+#5864 = VECTOR('',#5865,1.);+#5865 = DIRECTION('',(0.,0.,1.));+#5866 = DEFINITIONAL_REPRESENTATION('',(#5867),#5873);+#5867 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5868,#5869,#5870,#5871,#5872),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5868 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#5869 = CARTESIAN_POINT('',(0.749918843983,-5.00001E-02));+#5870 = CARTESIAN_POINT('',(0.499851709127,-5.00001E-02));+#5871 = CARTESIAN_POINT('',(0.249858892449,-5.00001E-02));+#5872 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5873 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5874 = ORIENTED_EDGE('',*,*,#5875,.T.);+#5875 = EDGE_CURVE('',#5840,#5876,#5878,.T.);+#5876 = VERTEX_POINT('',#5877);+#5877 = CARTESIAN_POINT('',(-0.897444914234,-0.106358005857,1.75));+#5878 = SURFACE_CURVE('',#5879,(#5885,#5894),.PCURVE_S1.);+#5879 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5880,#5881,#5882,#5883,#5884),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5880 = CARTESIAN_POINT('',(-0.856772824957,-0.11305462104,1.75));+#5881 = CARTESIAN_POINT('',(-0.86701488952,-0.11305462104,1.75));+#5882 = CARTESIAN_POINT('',(-0.877207795033,-0.111938478722,1.75));+#5883 = CARTESIAN_POINT('',(-0.887351233346,-0.109706153663,1.75));+#5884 = CARTESIAN_POINT('',(-0.897444914234,-0.106358005857,1.75));+#5885 = PCURVE('',#2438,#5886);+#5886 = DEFINITIONAL_REPRESENTATION('',(#5887),#5893);+#5887 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5888,#5889,#5890,#5891,#5892),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5888 = CARTESIAN_POINT('',(2.395816785934,0.755054369751));+#5889 = CARTESIAN_POINT('',(2.389706616444,0.763274206448));+#5890 = CARTESIAN_POINT('',(2.382730006658,0.77078872655));+#5891 = CARTESIAN_POINT('',(2.374887107969,0.777597658635));+#5892 = CARTESIAN_POINT('',(2.366178382433,0.783700984542));+#5893 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5894 = PCURVE('',#5895,#5902);+#5895 = SURFACE_OF_LINEAR_EXTRUSION('',#5896,#5900);+#5896 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5897,#5898,#5899),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5897 = CARTESIAN_POINT('',(-0.897444914234,-0.106358005857,1.8000001));+#5898 = CARTESIAN_POINT('',(-0.877256589048,-0.11305462104,1.8000001));+#5899 = CARTESIAN_POINT('',(-0.856772824957,-0.11305462104,1.8000001));+#5900 = VECTOR('',#5901,1.);+#5901 = DIRECTION('',(0.,0.,1.));+#5902 = DEFINITIONAL_REPRESENTATION('',(#5903),#5909);+#5903 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5904,#5905,#5906,#5907,#5908),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5904 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#5905 = CARTESIAN_POINT('',(0.749995544831,-5.00001E-02));+#5906 = CARTESIAN_POINT('',(0.499989075312,-5.00001E-02));+#5907 = CARTESIAN_POINT('',(0.249988069708,-5.00001E-02));+#5908 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5909 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5910 = ORIENTED_EDGE('',*,*,#5911,.T.);+#5911 = EDGE_CURVE('',#5876,#5912,#5914,.T.);+#5912 = VERTEX_POINT('',#5913);+#5913 = CARTESIAN_POINT('',(-0.940283555482,-8.528336395552E-02,1.75));+#5914 = SURFACE_CURVE('',#5915,(#5921,#5930),.PCURVE_S1.);+#5915 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5916,#5917,#5918,#5919,#5920),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5916 = CARTESIAN_POINT('',(-0.897444914234,-0.106358005857,1.75));+#5917 = CARTESIAN_POINT('',(-0.907541551676,-0.103008877339,1.75));+#5918 = CARTESIAN_POINT('',(-0.91804736276,-9.837933654814E-02,1.75));+#5919 = CARTESIAN_POINT('',(-0.928961662083,-9.247030498238E-02,1.75));+#5920 = CARTESIAN_POINT('',(-0.940283555482,-8.528336395552E-02,1.75));+#5921 = PCURVE('',#2438,#5922);+#5922 = DEFINITIONAL_REPRESENTATION('',(#5923),#5929);+#5923 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5924,#5925,#5926,#5927,#5928),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5924 = CARTESIAN_POINT('',(2.366178382433,0.783700984542));+#5925 = CARTESIAN_POINT('',(2.357467106011,0.789806098183));+#5926 = CARTESIAN_POINT('',(2.347484123088,0.795475733658));+#5927 = CARTESIAN_POINT('',(2.336230582113,0.800709890638));+#5928 = CARTESIAN_POINT('',(2.323708285616,0.805508794877));+#5929 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5930 = PCURVE('',#5931,#5938);+#5931 = SURFACE_OF_LINEAR_EXTRUSION('',#5932,#5936);+#5932 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5933,#5934,#5935),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5933 = CARTESIAN_POINT('',(-0.940283555482,-8.528336395552E-02,+ 1.8000001));+#5934 = CARTESIAN_POINT('',(-0.91763323942,-9.96613906732E-02,1.8000001)+ );+#5935 = CARTESIAN_POINT('',(-0.897444914234,-0.106358005857,1.8000001));+#5936 = VECTOR('',#5937,1.);+#5937 = DIRECTION('',(0.,0.,1.));+#5938 = DEFINITIONAL_REPRESENTATION('',(#5939),#5945);+#5939 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5940,#5941,#5942,#5943,#5944),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5940 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#5941 = CARTESIAN_POINT('',(0.749938705926,-5.00001E-02));+#5942 = CARTESIAN_POINT('',(0.499911080786,-5.00001E-02));+#5943 = CARTESIAN_POINT('',(0.249927934061,-5.00001E-02));+#5944 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5945 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5946 = ORIENTED_EDGE('',*,*,#5947,.T.);+#5947 = EDGE_CURVE('',#5912,#5948,#5950,.T.);+#5948 = VERTEX_POINT('',#5949);+#5949 = CARTESIAN_POINT('',(-0.940283555482,-0.127629607028,1.75));+#5950 = SURFACE_CURVE('',#5951,(#5955,#5962),.PCURVE_S1.);+#5951 = LINE('',#5952,#5953);+#5952 = CARTESIAN_POINT('',(-0.940283555482,1.066270836868,1.75));+#5953 = VECTOR('',#5954,1.);+#5954 = DIRECTION('',(0.,-1.,0.));+#5955 = PCURVE('',#2438,#5956);+#5956 = DEFINITIONAL_REPRESENTATION('',(#5957),#5961);+#5957 = LINE('',#5958,#5959);+#5958 = CARTESIAN_POINT('',(1.399520840778,0.118519243108));+#5959 = VECTOR('',#5960,1.);+#5960 = DIRECTION('',(0.802556617983,0.596575959062));+#5961 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5962 = PCURVE('',#5963,#5968);+#5963 = PLANE('',#5964);+#5964 = AXIS2_PLACEMENT_3D('',#5965,#5966,#5967);+#5965 = CARTESIAN_POINT('',(-0.940283555482,-0.127629607028,1.8000001));+#5966 = DIRECTION('',(1.,0.,0.));+#5967 = DIRECTION('',(0.,1.,0.));+#5968 = DEFINITIONAL_REPRESENTATION('',(#5969),#5972);+#5969 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5970,#5971),.UNSPECIFIED.,.F.,+ .F.,(2,2),(1.151554200824,1.193900443897),.PIECEWISE_BEZIER_KNOTS.);+#5970 = CARTESIAN_POINT('',(4.23462430726E-02,-5.00001E-02));+#5971 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5972 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5973 = ORIENTED_EDGE('',*,*,#5974,.T.);+#5974 = EDGE_CURVE('',#5948,#5975,#5977,.T.);+#5975 = VERTEX_POINT('',#5976);+#5976 = CARTESIAN_POINT('',(-0.89833123095,-0.14092435776,1.75));+#5977 = SURFACE_CURVE('',#5978,(#5984,#5993),.PCURVE_S1.);+#5978 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5979,#5980,#5981,#5982,#5983),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5979 = CARTESIAN_POINT('',(-0.940283555482,-0.127629607028,1.75));+#5980 = CARTESIAN_POINT('',(-0.929747009958,-0.132060864491,1.75));+#5981 = CARTESIAN_POINT('',(-0.919242677344,-0.135753889436,1.75));+#5982 = CARTESIAN_POINT('',(-0.908770703893,-0.138708431899,1.75));+#5983 = CARTESIAN_POINT('',(-0.89833123095,-0.14092435776,1.75));+#5984 = PCURVE('',#2438,#5985);+#5985 = DEFINITIONAL_REPRESENTATION('',(#5986),#5992);+#5986 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5987,#5988,#5989,#5990,#5991),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5987 = CARTESIAN_POINT('',(2.357693543241,0.83077154545));+#5988 = CARTESIAN_POINT('',(2.367535727995,0.824958952781));+#5989 = CARTESIAN_POINT('',(2.376766221908,0.818731801022));+#5990 = CARTESIAN_POINT('',(2.38538473712,0.81209005843));+#5991 = CARTESIAN_POINT('',(2.393391081668,0.805033758426));+#5992 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5993 = PCURVE('',#5994,#6001);+#5994 = SURFACE_OF_LINEAR_EXTRUSION('',#5995,#5999);+#5995 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5996,#5997,#5998),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5996 = CARTESIAN_POINT('',(-0.89833123095,-0.14092435776,1.8000001));+#5997 = CARTESIAN_POINT('',(-0.919208913581,-0.136492774183,1.8000001));+#5998 = CARTESIAN_POINT('',(-0.940283555482,-0.127629607028,1.8000001));+#5999 = VECTOR('',#6000,1.);+#6000 = DIRECTION('',(0.,0.,1.));+#6001 = DEFINITIONAL_REPRESENTATION('',(#6002),#6008);+#6002 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6003,#6004,#6005,#6006,#6007),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6003 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#6004 = CARTESIAN_POINT('',(0.750018397148,-5.00001E-02));+#6005 = CARTESIAN_POINT('',(0.500022350317,-5.00001E-02));+#6006 = CARTESIAN_POINT('',(0.25001512688,-5.00001E-02));+#6007 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6008 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6009 = ORIENTED_EDGE('',*,*,#6010,.T.);+#6010 = EDGE_CURVE('',#5975,#6011,#6013,.T.);+#6011 = VERTEX_POINT('',#6012);+#6012 = CARTESIAN_POINT('',(-0.856772824957,-0.145355941338,1.75));+#6013 = SURFACE_CURVE('',#6014,(#6020,#6029),.PCURVE_S1.);+#6014 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6015,#6016,#6017,#6018,#6019),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6015 = CARTESIAN_POINT('',(-0.89833123095,-0.14092435776,1.75));+#6016 = CARTESIAN_POINT('',(-0.887892747913,-0.143140073499,1.75));+#6017 = CARTESIAN_POINT('',(-0.877486759212,-0.144617312714,1.75));+#6018 = CARTESIAN_POINT('',(-0.867113406145,-0.145355941338,1.75));+#6019 = CARTESIAN_POINT('',(-0.856772824957,-0.145355941338,1.75));+#6020 = PCURVE('',#2438,#6021);+#6021 = DEFINITIONAL_REPRESENTATION('',(#6022),#6028);+#6022 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6023,#6024,#6025,#6026,#6027),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6023 = CARTESIAN_POINT('',(2.393391081668,0.805033758426));+#6024 = CARTESIAN_POINT('',(2.401396667026,0.797978127525));+#6025 = CARTESIAN_POINT('',(2.408790197824,0.790508017828));+#6026 = CARTESIAN_POINT('',(2.415571482168,0.782623462753));+#6027 = CARTESIAN_POINT('',(2.421740424308,0.774324560887));+#6028 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6029 = PCURVE('',#6030,#6037);+#6030 = SURFACE_OF_LINEAR_EXTRUSION('',#6031,#6035);+#6031 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6032,#6033,#6034),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6032 = CARTESIAN_POINT('',(-0.856772824957,-0.145355941338,1.8000001));+#6033 = CARTESIAN_POINT('',(-0.877453548318,-0.145355941338,1.8000001));+#6034 = CARTESIAN_POINT('',(-0.89833123095,-0.14092435776,1.8000001));+#6035 = VECTOR('',#6036,1.);+#6036 = DIRECTION('',(0.,0.,1.));+#6037 = DEFINITIONAL_REPRESENTATION('',(#6038),#6044);+#6038 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6039,#6040,#6041,#6042,#6043),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6039 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#6040 = CARTESIAN_POINT('',(0.750008580429,-5.00001E-02));+#6041 = CARTESIAN_POINT('',(0.500009258733,-5.00001E-02));+#6042 = CARTESIAN_POINT('',(0.250005307058,-5.00001E-02));+#6043 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6044 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6045 = ORIENTED_EDGE('',*,*,#6046,.T.);+#6046 = EDGE_CURVE('',#6011,#6047,#6049,.T.);+#6047 = VERTEX_POINT('',#6048);+#6048 = CARTESIAN_POINT('',(-0.781140465237,-0.123296503086,1.75));+#6049 = SURFACE_CURVE('',#6050,(#6056,#6065),.PCURVE_S1.);+#6050 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6051,#6052,#6053,#6054,#6055),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6051 = CARTESIAN_POINT('',(-0.856772824957,-0.145355941338,1.75));+#6052 = CARTESIAN_POINT('',(-0.831996534189,-0.145355941338,1.75));+#6053 = CARTESIAN_POINT('',(-0.811108195066,-0.141691406151,1.75));+#6054 = CARTESIAN_POINT('',(-0.79415209073,-0.134336670171,1.75));+#6055 = CARTESIAN_POINT('',(-0.781140465237,-0.123296503086,1.75));+#6056 = PCURVE('',#2438,#6057);+#6057 = DEFINITIONAL_REPRESENTATION('',(#6058),#6064);+#6058 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6059,#6060,#6061,#6062,#6063),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6059 = CARTESIAN_POINT('',(2.421740424308,0.774324560887));+#6060 = CARTESIAN_POINT('',(2.436521363735,0.754440184762));+#6061 = CARTESIAN_POINT('',(2.446041847714,0.735489936366));+#6062 = CARTESIAN_POINT('',(2.450254859886,0.717494043945));+#6063 = CARTESIAN_POINT('',(2.449156923686,0.700465179528));+#6064 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6065 = PCURVE('',#6066,#6073);+#6066 = SURFACE_OF_LINEAR_EXTRUSION('',#6067,#6071);+#6067 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6068,#6069,#6070),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6068 = CARTESIAN_POINT('',(-0.781140465237,-0.123296503086,1.8000001));+#6069 = CARTESIAN_POINT('',(-0.807139088891,-0.145355941338,1.8000001));+#6070 = CARTESIAN_POINT('',(-0.856772824957,-0.145355941338,1.8000001));+#6071 = VECTOR('',#6072,1.);+#6072 = DIRECTION('',(0.,0.,1.));+#6073 = DEFINITIONAL_REPRESENTATION('',(#6074),#6080);+#6074 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6075,#6076,#6077,#6078,#6079),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6075 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#6076 = CARTESIAN_POINT('',(0.750408766984,-5.00001E-02));+#6077 = CARTESIAN_POINT('',(0.500431344469,-5.00001E-02));+#6078 = CARTESIAN_POINT('',(0.250236813802,-5.00001E-02));+#6079 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6080 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6081 = ORIENTED_EDGE('',*,*,#6082,.T.);+#6082 = EDGE_CURVE('',#6047,#6083,#6085,.T.);+#6083 = VERTEX_POINT('',#6084);+#6084 = CARTESIAN_POINT('',(-0.755141841583,-5.928474030165E-02,1.75));+#6085 = SURFACE_CURVE('',#6086,(#6095,#6107),.PCURVE_S1.);+#6086 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6087,#6088,#6089,#6090,#6091,+ #6092,#6093,#6094),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.221931481284,+ 1.),.UNSPECIFIED.);+#6087 = CARTESIAN_POINT('',(-0.781140465237,-0.123296503086,1.75));+#6088 = CARTESIAN_POINT('',(-0.778254819277,-0.120848076211,1.75));+#6089 = CARTESIAN_POINT('',(-0.775582494645,-0.118236100926,1.75));+#6090 = CARTESIAN_POINT('',(-0.773123659546,-0.115460611613,1.75));+#6091 = CARTESIAN_POINT('',(-0.763006721514,-0.102218235627,1.75));+#6092 = CARTESIAN_POINT('',(-0.757760082287,-8.990622054845E-02,1.75));+#6093 = CARTESIAN_POINT('',(-0.755141841583,-7.559015038344E-02,1.75));+#6094 = CARTESIAN_POINT('',(-0.755141841583,-5.928474030165E-02,1.75));+#6095 = PCURVE('',#2438,#6096);+#6096 = DEFINITIONAL_REPRESENTATION('',(#6097),#6106);+#6097 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6098,#6099,#6100,#6101,#6102,+ #6103,#6104,#6105),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.221931481284,+ 1.),.UNSPECIFIED.);+#6098 = CARTESIAN_POINT('',(2.449156923686,0.700465179528));+#6099 = CARTESIAN_POINT('',(2.4489134295,0.696688612654));+#6100 = CARTESIAN_POINT('',(2.448411416079,0.692985679175));+#6101 = CARTESIAN_POINT('',(2.44765081067,0.689356534595));+#6102 = CARTESIAN_POINT('',(2.443058576195,0.67333703587));+#6103 = CARTESIAN_POINT('',(2.436307505841,0.661781258632));+#6104 = CARTESIAN_POINT('',(2.426380028446,0.651139348939));+#6105 = CARTESIAN_POINT('',(2.413294013676,0.641411933282));+#6106 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6107 = PCURVE('',#6108,#6115);+#6108 = SURFACE_OF_LINEAR_EXTRUSION('',#6109,#6113);+#6109 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6110,#6111,#6112),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6110 = CARTESIAN_POINT('',(-0.755141841583,-5.928474030165E-02,+ 1.8000001));+#6111 = CARTESIAN_POINT('',(-0.755141841583,-0.101237064834,1.8000001));+#6112 = CARTESIAN_POINT('',(-0.781140465237,-0.123296503086,1.8000001));+#6113 = VECTOR('',#6114,1.);+#6114 = DIRECTION('',(0.,0.,1.));+#6115 = DEFINITIONAL_REPRESENTATION('',(#6116),#6125);+#6116 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6117,#6118,#6119,#6120,#6121,+ #6122,#6123,#6124),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.221931481284,+ 1.),.UNSPECIFIED.);+#6117 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#6118 = CARTESIAN_POINT('',(0.944503870694,-5.00001E-02));+#6119 = CARTESIAN_POINT('',(0.889003864705,-5.00001E-02));+#6120 = CARTESIAN_POINT('',(0.833501925703,-5.00001E-02));+#6121 = CARTESIAN_POINT('',(0.583416064149,-5.00001E-02));+#6122 = CARTESIAN_POINT('',(0.388832221481,-5.00001E-02));+#6123 = CARTESIAN_POINT('',(0.194332617603,-5.00001E-02));+#6124 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6125 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6126 = ORIENTED_EDGE('',*,*,#6127,.T.);+#6127 = EDGE_CURVE('',#6083,#6128,#6130,.T.);+#6128 = VERTEX_POINT('',#6129);+#6129 = CARTESIAN_POINT('',(-0.774049931513,-2.954389051577E-03,1.75));+#6130 = SURFACE_CURVE('',#6131,(#6137,#6146),.PCURVE_S1.);+#6131 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6132,#6133,#6134,#6135,#6136),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6132 = CARTESIAN_POINT('',(-0.755141841583,-5.928474030165E-02,1.75));+#6133 = CARTESIAN_POINT('',(-0.755141841583,-4.147198365424E-02,1.75));+#6134 = CARTESIAN_POINT('',(-0.758288923477,-2.613806016258E-02,1.75));+#6135 = CARTESIAN_POINT('',(-0.764593137498,-1.329775750533E-02,1.75));+#6136 = CARTESIAN_POINT('',(-0.774049931513,-2.954389051577E-03,1.75));+#6137 = PCURVE('',#2438,#6138);+#6138 = DEFINITIONAL_REPRESENTATION('',(#6139),#6145);+#6139 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6140,#6141,#6142,#6143,#6144),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6140 = CARTESIAN_POINT('',(2.413294013676,0.641411933282));+#6141 = CARTESIAN_POINT('',(2.398998267944,0.630785270901));+#6142 = CARTESIAN_POINT('',(2.384814452766,0.62416313219));+#6143 = CARTESIAN_POINT('',(2.370748440366,0.621562405001));+#6144 = CARTESIAN_POINT('',(2.356805605602,0.622981412667));+#6145 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6146 = PCURVE('',#6147,#6154);+#6147 = SURFACE_OF_LINEAR_EXTRUSION('',#6148,#6152);+#6148 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6149,#6150,#6151),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6149 = CARTESIAN_POINT('',(-0.774049931513,-2.954389051577E-03,+ 1.8000001));+#6150 = CARTESIAN_POINT('',(-0.755141841583,-2.363511241262E-02,+ 1.8000001));+#6151 = CARTESIAN_POINT('',(-0.755141841583,-5.928474030165E-02,+ 1.8000001));+#6152 = VECTOR('',#6153,1.);+#6153 = DIRECTION('',(0.,0.,1.));+#6154 = DEFINITIONAL_REPRESENTATION('',(#6155),#6161);+#6155 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6156,#6157,#6158,#6159,#6160),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6156 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#6157 = CARTESIAN_POINT('',(0.750169108316,-5.00001E-02));+#6158 = CARTESIAN_POINT('',(0.500161403044,-5.00001E-02));+#6159 = CARTESIAN_POINT('',(0.250072695069,-5.00001E-02));+#6160 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6161 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6162 = ORIENTED_EDGE('',*,*,#6163,.T.);+#6163 = EDGE_CURVE('',#6128,#6164,#6166,.T.);+#6164 = VERTEX_POINT('',#6165);+#6165 = CARTESIAN_POINT('',(-0.834319468165,2.737733854461E-02,1.75));+#6166 = SURFACE_CURVE('',#6167,(#6173,#6182),.PCURVE_S1.);+#6167 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6168,#6169,#6170,#6171,#6172),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6168 = CARTESIAN_POINT('',(-0.774049931513,-2.954389051577E-03,1.75));+#6169 = CARTESIAN_POINT('',(-0.783511605981,7.394317398062E-03,1.75));+#6170 = CARTESIAN_POINT('',(-0.796719091053,1.589906241329E-02,1.75));+#6171 = CARTESIAN_POINT('',(-0.813663964721,2.255772107437E-02,1.75));+#6172 = CARTESIAN_POINT('',(-0.834319468165,2.737733854461E-02,1.75));+#6173 = PCURVE('',#2438,#6174);+#6174 = DEFINITIONAL_REPRESENTATION('',(#6175),#6181);+#6175 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6176,#6177,#6178,#6179,#6180),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6176 = CARTESIAN_POINT('',(2.356805605602,0.622981412667));+#6177 = CARTESIAN_POINT('',(2.342855575234,0.624401152654));+#6178 = CARTESIAN_POINT('',(2.328150767764,0.629927180791));+#6179 = CARTESIAN_POINT('',(2.312697912929,0.639554005618));+#6180 = CARTESIAN_POINT('',(2.296507320255,0.65325594869));+#6181 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6182 = PCURVE('',#6183,#6190);+#6183 = SURFACE_OF_LINEAR_EXTRUSION('',#6184,#6188);+#6184 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6185,#6186,#6187),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6185 = CARTESIAN_POINT('',(-0.834319468165,2.737733854461E-02,1.8000001+ ));+#6186 = CARTESIAN_POINT('',(-0.792958021443,1.772633430946E-02,1.8000001+ ));+#6187 = CARTESIAN_POINT('',(-0.774049931513,-2.954389051577E-03,+ 1.8000001));+#6188 = VECTOR('',#6189,1.);+#6189 = DIRECTION('',(0.,0.,1.));+#6190 = DEFINITIONAL_REPRESENTATION('',(#6191),#6197);+#6191 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6192,#6193,#6194,#6195,#6196),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6192 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#6193 = CARTESIAN_POINT('',(0.749798247649,-5.00001E-02));+#6194 = CARTESIAN_POINT('',(0.49966179832,-5.00001E-02));+#6195 = CARTESIAN_POINT('',(0.24969512772,-5.00001E-02));+#6196 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6197 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6198 = ORIENTED_EDGE('',*,*,#6199,.T.);+#6199 = EDGE_CURVE('',#6164,#6200,#6202,.T.);+#6200 = VERTEX_POINT('',#6201);+#6201 = CARTESIAN_POINT('',(-0.855197150796,3.210436102714E-02,1.75));+#6202 = SURFACE_CURVE('',#6203,(#6207,#6214),.PCURVE_S1.);+#6203 = LINE('',#6204,#6205);+#6204 = CARTESIAN_POINT('',(-1.487463037725,0.175258901464,1.75));+#6205 = VECTOR('',#6206,1.);+#6206 = DIRECTION('',(-0.975313298974,0.220825652598,0.));+#6207 = PCURVE('',#2438,#6208);+#6208 = DEFINITIONAL_REPRESENTATION('',(#6209),#6213);+#6209 = LINE('',#6210,#6211);+#6210 = CARTESIAN_POINT('',(1.788174241841,1.089218057707));+#6211 = VECTOR('',#6212,1.);+#6212 = DIRECTION('',(-0.759073555634,0.651004867214));+#6213 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6214 = PCURVE('',#6215,#6220);+#6215 = PLANE('',#6216);+#6216 = AXIS2_PLACEMENT_3D('',#6217,#6218,#6219);+#6217 = CARTESIAN_POINT('',(-0.855197150796,3.210436102714E-02,1.8000001+ ));+#6218 = DIRECTION('',(-0.220825652598,-0.975313298974,0.));+#6219 = DIRECTION('',(0.975313298974,-0.220825652598,0.));+#6220 = DEFINITIONAL_REPRESENTATION('',(#6221),#6224);+#6221 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6222,#6223),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.669675652169,-0.648269522823),.PIECEWISE_BEZIER_KNOTS.);+#6222 = CARTESIAN_POINT('',(2.140612934645E-02,-5.00001E-02));+#6223 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6224 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6225 = ORIENTED_EDGE('',*,*,#6226,.T.);+#6226 = EDGE_CURVE('',#6200,#6227,#6229,.T.);+#6227 = VERTEX_POINT('',#6228);+#6228 = CARTESIAN_POINT('',(-0.895278362263,4.923981752628E-02,1.75));+#6229 = SURFACE_CURVE('',#6230,(#6236,#6245),.PCURVE_S1.);+#6230 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6231,#6232,#6233,#6234,#6235),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6231 = CARTESIAN_POINT('',(-0.855197150796,3.210436102714E-02,1.75));+#6232 = CARTESIAN_POINT('',(-0.869858799105,3.554837237487E-02,1.75));+#6233 = CARTESIAN_POINT('',(-0.88143352059,3.955192783211E-02,1.75));+#6234 = CARTESIAN_POINT('',(-0.889908170037,4.411596439299E-02,1.75));+#6235 = CARTESIAN_POINT('',(-0.895278362263,4.923981752628E-02,1.75));+#6236 = PCURVE('',#2438,#6237);+#6237 = DEFINITIONAL_REPRESENTATION('',(#6238),#6244);+#6238 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6239,#6240,#6241,#6242,#6243),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6239 = CARTESIAN_POINT('',(2.280258493539,0.667191443082));+#6240 = CARTESIAN_POINT('',(2.268747692538,0.67690363159));+#6241 = CARTESIAN_POINT('',(2.25862941204,0.683804575983));+#6242 = CARTESIAN_POINT('',(2.249910742172,0.687883167493));+#6243 = CARTESIAN_POINT('',(2.242594832353,0.689136283207));+#6244 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6245 = PCURVE('',#6246,#6253);+#6246 = SURFACE_OF_LINEAR_EXTRUSION('',#6247,#6251);+#6247 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6248,#6249,#6250),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6248 = CARTESIAN_POINT('',(-0.895278362263,4.923981752628E-02,1.8000001+ ));+#6249 = CARTESIAN_POINT('',(-0.884544082042,3.899793548082E-02,1.8000001+ ));+#6250 = CARTESIAN_POINT('',(-0.855197150796,3.210436102714E-02,1.8000001+ ));+#6251 = VECTOR('',#6252,1.);+#6252 = DIRECTION('',(0.,0.,1.));+#6253 = DEFINITIONAL_REPRESENTATION('',(#6254),#6260);+#6254 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6255,#6256,#6257,#6258,#6259),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6255 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#6256 = CARTESIAN_POINT('',(0.750201338153,-5.00001E-02));+#6257 = CARTESIAN_POINT('',(0.500229178854,-5.00001E-02));+#6258 = CARTESIAN_POINT('',(0.250142166769,-5.00001E-02));+#6259 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6260 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6261 = ORIENTED_EDGE('',*,*,#6262,.T.);+#6262 = EDGE_CURVE('',#6227,#6263,#6265,.T.);+#6263 = VERTEX_POINT('',#6264);+#6264 = CARTESIAN_POINT('',(-0.906012642484,7.898066731216E-02,1.75));+#6265 = SURFACE_CURVE('',#6266,(#6272,#6281),.PCURVE_S1.);+#6266 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6267,#6268,#6269,#6270,#6271),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6267 = CARTESIAN_POINT('',(-0.895278362263,4.923981752628E-02,1.75));+#6268 = CARTESIAN_POINT('',(-0.900646001618,5.436123489265E-02,1.75));+#6269 = CARTESIAN_POINT('',(-0.904224407327,6.102592662781E-02,1.75));+#6270 = CARTESIAN_POINT('',(-0.906012642484,6.923339416502E-02,1.75));+#6271 = CARTESIAN_POINT('',(-0.906012642484,7.898066731216E-02,1.75));+#6272 = PCURVE('',#2438,#6273);+#6273 = DEFINITIONAL_REPRESENTATION('',(#6274),#6280);+#6274 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6275,#6276,#6277,#6278,#6279),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6275 = CARTESIAN_POINT('',(2.242594832353,0.689136283207));+#6276 = CARTESIAN_POINT('',(2.235282400356,0.690388803217));+#6277 = CARTESIAN_POINT('',(2.22779881708,0.689284681536));+#6278 = CARTESIAN_POINT('',(2.220145041587,0.685823463679));+#6279 = CARTESIAN_POINT('',(2.212322303015,0.680008474853));+#6280 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6281 = PCURVE('',#6282,#6289);+#6282 = SURFACE_OF_LINEAR_EXTRUSION('',#6283,#6287);+#6283 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6284,#6285,#6286),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6284 = CARTESIAN_POINT('',(-0.906012642484,7.898066731216E-02,1.8000001+ ));+#6285 = CARTESIAN_POINT('',(-0.906012642484,5.948169957175E-02,1.8000001+ ));+#6286 = CARTESIAN_POINT('',(-0.895278362263,4.923981752628E-02,1.8000001+ ));+#6287 = VECTOR('',#6288,1.);+#6288 = DIRECTION('',(0.,0.,1.));+#6289 = DEFINITIONAL_REPRESENTATION('',(#6290),#6296);+#6290 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6291,#6292,#6293,#6294,#6295),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6291 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#6292 = CARTESIAN_POINT('',(0.749976745308,-5.00001E-02));+#6293 = CARTESIAN_POINT('',(0.499946681642,-5.00001E-02));+#6294 = CARTESIAN_POINT('',(0.249943311792,-5.00001E-02));+#6295 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6296 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6297 = ORIENTED_EDGE('',*,*,#6298,.T.);+#6298 = EDGE_CURVE('',#6263,#6299,#6301,.T.);+#6299 = VERTEX_POINT('',#6300);+#6300 = CARTESIAN_POINT('',(-0.889665023065,0.114334856296,1.75));+#6301 = SURFACE_CURVE('',#6302,(#6311,#6323),.PCURVE_S1.);+#6302 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6303,#6304,#6305,#6306,#6307,+ #6308,#6309,#6310),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.578009324055,+ 1.),.UNSPECIFIED.);+#6303 = CARTESIAN_POINT('',(-0.906012642484,7.898066731216E-02,1.75));+#6304 = CARTESIAN_POINT('',(-0.906012642484,8.541175546908E-02,1.75));+#6305 = CARTESIAN_POINT('',(-0.905102682245,9.133405481719E-02,1.75));+#6306 = CARTESIAN_POINT('',(-0.903282119449,9.674670431199E-02,1.75));+#6307 = CARTESIAN_POINT('',(-0.898557359938,0.105228599992,1.75));+#6308 = CARTESIAN_POINT('',(-0.89607830656,0.108536026919,1.75));+#6309 = CARTESIAN_POINT('',(-0.89311408625,0.11157145025,1.75));+#6310 = CARTESIAN_POINT('',(-0.889665023065,0.114334856296,1.75));+#6311 = PCURVE('',#2438,#6312);+#6312 = DEFINITIONAL_REPRESENTATION('',(#6313),#6322);+#6313 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6314,#6315,#6316,#6317,#6318,+ #6319,#6320,#6321),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.578009324055,+ 1.),.UNSPECIFIED.);+#6314 = CARTESIAN_POINT('',(2.212322303015,0.680008474853));+#6315 = CARTESIAN_POINT('',(2.207160990654,0.676171842268));+#6316 = CARTESIAN_POINT('',(2.202950870521,0.671908446243));+#6317 = CARTESIAN_POINT('',(2.199693016844,0.667218284959));+#6318 = CARTESIAN_POINT('',(2.19570449327,0.658366302895));+#6319 = CARTESIAN_POINT('',(2.194529039547,0.654403590809));+#6320 = CARTESIAN_POINT('',(2.193861323039,0.650213775597));+#6321 = CARTESIAN_POINT('',(2.193701161406,0.6457971255));+#6322 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6323 = PCURVE('',#6324,#6331);+#6324 = SURFACE_OF_LINEAR_EXTRUSION('',#6325,#6329);+#6325 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6326,#6327,#6328),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6326 = CARTESIAN_POINT('',(-0.889665023065,0.114334856296,1.8000001));+#6327 = CARTESIAN_POINT('',(-0.906012642484,0.101237064834,1.8000001));+#6328 = CARTESIAN_POINT('',(-0.906012642484,7.898066731216E-02,1.8000001+ ));+#6329 = VECTOR('',#6330,1.);+#6330 = DIRECTION('',(0.,0.,1.));+#6331 = DEFINITIONAL_REPRESENTATION('',(#6332),#6341);+#6332 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6333,#6334,#6335,#6336,#6337,+ #6338,#6339,#6340),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.578009324055,+ 1.),.UNSPECIFIED.);+#6333 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#6334 = CARTESIAN_POINT('',(0.855522706435,-5.00001E-02));+#6335 = CARTESIAN_POINT('',(0.711022763375,-5.00001E-02));+#6336 = CARTESIAN_POINT('',(0.566511430304,-5.00001E-02));+#6337 = CARTESIAN_POINT('',(0.316495687841,-5.00001E-02));+#6338 = CARTESIAN_POINT('',(0.210991322704,-5.00001E-02));+#6339 = CARTESIAN_POINT('',(0.105491298055,-5.00001E-02));+#6340 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6341 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6342 = ORIENTED_EDGE('',*,*,#6343,.T.);+#6343 = EDGE_CURVE('',#6299,#6344,#6346,.T.);+#6344 = VERTEX_POINT('',#6345);+#6345 = CARTESIAN_POINT('',(-0.845152228021,0.127432647758,1.75));+#6346 = SURFACE_CURVE('',#6347,(#6353,#6362),.PCURVE_S1.);+#6347 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6348,#6349,#6350,#6351,#6352),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6348 = CARTESIAN_POINT('',(-0.889665023065,0.114334856296,1.75));+#6349 = CARTESIAN_POINT('',(-0.881489167955,0.120885390812,1.75));+#6350 = CARTESIAN_POINT('',(-0.871342968061,0.125251678097,1.75));+#6351 = CARTESIAN_POINT('',(-0.859228381412,0.127432647758,1.75));+#6352 = CARTESIAN_POINT('',(-0.845152228021,0.127432647758,1.75));+#6353 = PCURVE('',#2438,#6354);+#6354 = DEFINITIONAL_REPRESENTATION('',(#6355),#6361);+#6355 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6356,#6357,#6358,#6359,#6360),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6356 = CARTESIAN_POINT('',(2.193701161406,0.6457971255));+#6357 = CARTESIAN_POINT('',(2.193321505182,0.635327647463));+#6358 = CARTESIAN_POINT('',(2.195870291358,0.624579925565));+#6359 = CARTESIAN_POINT('',(2.201347210872,0.613556169809));+#6360 = CARTESIAN_POINT('',(2.209744705581,0.60225925975));+#6361 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6362 = PCURVE('',#6363,#6370);+#6363 = SURFACE_OF_LINEAR_EXTRUSION('',#6364,#6368);+#6364 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6365,#6366,#6367),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6365 = CARTESIAN_POINT('',(-0.845152228021,0.127432647758,1.8000001));+#6366 = CARTESIAN_POINT('',(-0.873317403646,0.127432647758,1.8000001));+#6367 = CARTESIAN_POINT('',(-0.889665023065,0.114334856296,1.8000001));+#6368 = VECTOR('',#6369,1.);+#6369 = DIRECTION('',(0.,0.,1.));+#6370 = DEFINITIONAL_REPRESENTATION('',(#6371),#6377);+#6371 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6372,#6373,#6374,#6375,#6376),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6372 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#6373 = CARTESIAN_POINT('',(0.749937440411,-5.00001E-02));+#6374 = CARTESIAN_POINT('',(0.499882063397,-5.00001E-02));+#6375 = CARTESIAN_POINT('',(0.249885773442,-5.00001E-02));+#6376 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6377 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6378 = ORIENTED_EDGE('',*,*,#6379,.T.);+#6379 = EDGE_CURVE('',#6344,#5406,#6380,.T.);+#6380 = SURFACE_CURVE('',#6381,(#6387,#6396),.PCURVE_S1.);+#6381 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6382,#6383,#6384,#6385,#6386),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6382 = CARTESIAN_POINT('',(-0.845152228021,0.127432647758,1.75));+#6383 = CARTESIAN_POINT('',(-0.835895027751,0.127432647758,1.75));+#6384 = CARTESIAN_POINT('',(-0.826687001086,0.126447827026,1.75));+#6385 = CARTESIAN_POINT('',(-0.817528365395,0.124478153303,1.75));+#6386 = CARTESIAN_POINT('',(-0.808419324147,0.121523869655,1.75));+#6387 = PCURVE('',#2438,#6388);+#6388 = DEFINITIONAL_REPRESENTATION('',(#6389),#6395);+#6389 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6390,#6391,#6392,#6393,#6394),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6390 = CARTESIAN_POINT('',(2.209744705581,0.60225925975));+#6391 = CARTESIAN_POINT('',(2.21526732871,0.594829832409));+#6392 = CARTESIAN_POINT('',(2.221550990445,0.588027390043));+#6393 = CARTESIAN_POINT('',(2.228595586998,0.581852126348));+#6394 = CARTESIAN_POINT('',(2.23640080191,0.576304059611));+#6395 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6396 = PCURVE('',#6397,#6404);+#6397 = SURFACE_OF_LINEAR_EXTRUSION('',#6398,#6402);+#6398 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6399,#6400,#6401),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6399 = CARTESIAN_POINT('',(-0.808419324147,0.121523869655,1.8000001));+#6400 = CARTESIAN_POINT('',(-0.826638056631,0.127432647758,1.8000001));+#6401 = CARTESIAN_POINT('',(-0.845152228021,0.127432647758,1.8000001));+#6402 = VECTOR('',#6403,1.);+#6403 = DIRECTION('',(0.,0.,1.));+#6404 = DEFINITIONAL_REPRESENTATION('',(#6405),#6411);+#6405 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6406,#6407,#6408,#6409,#6410),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6406 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#6407 = CARTESIAN_POINT('',(0.749996905745,-5.00001E-02));+#6408 = CARTESIAN_POINT('',(0.499991990412,-5.00001E-02));+#6409 = CARTESIAN_POINT('',(0.249991080774,-5.00001E-02));+#6410 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6411 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6412 = ADVANCED_FACE('',(#6413),#6397,.T.);+#6413 = FACE_BOUND('',#6414,.T.);+#6414 = EDGE_LOOP('',(#6415,#6416,#6439,#6467));+#6415 = ORIENTED_EDGE('',*,*,#6379,.T.);+#6416 = ORIENTED_EDGE('',*,*,#6417,.T.);+#6417 = EDGE_CURVE('',#5406,#6418,#6420,.T.);+#6418 = VERTEX_POINT('',#6419);+#6419 = CARTESIAN_POINT('',(-0.808419324147,0.121523869655,1.7000001));+#6420 = SURFACE_CURVE('',#6421,(#6425,#6432),.PCURVE_S1.);+#6421 = LINE('',#6422,#6423);+#6422 = CARTESIAN_POINT('',(-0.808419324147,0.121523869655,1.8000001));+#6423 = VECTOR('',#6424,1.);+#6424 = DIRECTION('',(-0.,-0.,-1.));+#6425 = PCURVE('',#6397,#6426);+#6426 = DEFINITIONAL_REPRESENTATION('',(#6427),#6431);+#6427 = LINE('',#6428,#6429);+#6428 = CARTESIAN_POINT('',(0.,0.));+#6429 = VECTOR('',#6430,1.);+#6430 = DIRECTION('',(0.,-1.));+#6431 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6432 = PCURVE('',#5427,#6433);+#6433 = DEFINITIONAL_REPRESENTATION('',(#6434),#6438);+#6434 = LINE('',#6435,#6436);+#6435 = CARTESIAN_POINT('',(1.,0.));+#6436 = VECTOR('',#6437,1.);+#6437 = DIRECTION('',(0.,-1.));+#6438 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6439 = ORIENTED_EDGE('',*,*,#6440,.T.);+#6440 = EDGE_CURVE('',#6418,#6441,#6443,.T.);+#6441 = VERTEX_POINT('',#6442);+#6442 = CARTESIAN_POINT('',(-0.845152228021,0.127432647758,1.7000001));+#6443 = SURFACE_CURVE('',#6444,(#6448,#6455),.PCURVE_S1.);+#6444 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6445,#6446,#6447),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6445 = CARTESIAN_POINT('',(-0.808419324147,0.121523869655,1.7000001));+#6446 = CARTESIAN_POINT('',(-0.826638056631,0.127432647758,1.7000001));+#6447 = CARTESIAN_POINT('',(-0.845152228021,0.127432647758,1.7000001));+#6448 = PCURVE('',#6397,#6449);+#6449 = DEFINITIONAL_REPRESENTATION('',(#6450),#6454);+#6450 = LINE('',#6451,#6452);+#6451 = CARTESIAN_POINT('',(0.,-0.1));+#6452 = VECTOR('',#6453,1.);+#6453 = DIRECTION('',(1.,0.));+#6454 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6455 = PCURVE('',#6456,#6461);+#6456 = PLANE('',#6457);+#6457 = AXIS2_PLACEMENT_3D('',#6458,#6459,#6460);+#6458 = CARTESIAN_POINT('',(-0.971403120159,-0.139644122505,1.7000001));+#6459 = DIRECTION('',(0.,0.,1.));+#6460 = DIRECTION('',(1.,0.,0.));+#6461 = DEFINITIONAL_REPRESENTATION('',(#6462),#6466);+#6462 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6463,#6464,#6465),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6463 = CARTESIAN_POINT('',(0.162983796012,0.261167992159));+#6464 = CARTESIAN_POINT('',(0.144765063527,0.267076770263));+#6465 = CARTESIAN_POINT('',(0.126250892137,0.267076770263));+#6466 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6467 = ORIENTED_EDGE('',*,*,#6468,.F.);+#6468 = EDGE_CURVE('',#6344,#6441,#6469,.T.);+#6469 = SURFACE_CURVE('',#6470,(#6474,#6481),.PCURVE_S1.);+#6470 = LINE('',#6471,#6472);+#6471 = CARTESIAN_POINT('',(-0.845152228021,0.127432647758,1.8000001));+#6472 = VECTOR('',#6473,1.);+#6473 = DIRECTION('',(-0.,-0.,-1.));+#6474 = PCURVE('',#6397,#6475);+#6475 = DEFINITIONAL_REPRESENTATION('',(#6476),#6480);+#6476 = LINE('',#6477,#6478);+#6477 = CARTESIAN_POINT('',(1.,0.));+#6478 = VECTOR('',#6479,1.);+#6479 = DIRECTION('',(0.,-1.));+#6480 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6481 = PCURVE('',#6363,#6482);+#6482 = DEFINITIONAL_REPRESENTATION('',(#6483),#6487);+#6483 = LINE('',#6484,#6485);+#6484 = CARTESIAN_POINT('',(0.,0.));+#6485 = VECTOR('',#6486,1.);+#6486 = DIRECTION('',(0.,-1.));+#6487 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6488 = ADVANCED_FACE('',(#6489),#6456,.T.);+#6489 = FACE_BOUND('',#6490,.F.);+#6490 = EDGE_LOOP('',(#6491,#6516,#6537,#6538,#6561,#6584,#6607,#6630,+ #6653,#6676,#6699,#6722,#6745,#6768,#6791,#6814,#6837,#6860,#6883,+ #6906,#6929,#6952,#6975,#6998,#7021,#7044,#7067,#7090));+#6491 = ORIENTED_EDGE('',*,*,#6492,.T.);+#6492 = EDGE_CURVE('',#6493,#6495,#6497,.T.);+#6493 = VERTEX_POINT('',#6494);+#6494 = CARTESIAN_POINT('',(-0.772080338812,0.144371144987,1.7000001));+#6495 = VERTEX_POINT('',#6496);+#6496 = CARTESIAN_POINT('',(-0.772080338812,0.103994494616,1.7000001));+#6497 = SURFACE_CURVE('',#6498,(#6502,#6509),.PCURVE_S1.);+#6498 = LINE('',#6499,#6500);+#6499 = CARTESIAN_POINT('',(-0.772080338812,0.144371144987,1.7000001));+#6500 = VECTOR('',#6501,1.);+#6501 = DIRECTION('',(0.,-1.,0.));+#6502 = PCURVE('',#6456,#6503);+#6503 = DEFINITIONAL_REPRESENTATION('',(#6504),#6508);+#6504 = LINE('',#6505,#6506);+#6505 = CARTESIAN_POINT('',(0.199322781346,0.284015267492));+#6506 = VECTOR('',#6507,1.);+#6507 = DIRECTION('',(0.,-1.));+#6508 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6509 = PCURVE('',#5459,#6510);+#6510 = DEFINITIONAL_REPRESENTATION('',(#6511),#6515);+#6511 = LINE('',#6512,#6513);+#6512 = CARTESIAN_POINT('',(0.,-0.1));+#6513 = VECTOR('',#6514,1.);+#6514 = DIRECTION('',(1.,0.));+#6515 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6516 = ORIENTED_EDGE('',*,*,#6517,.T.);+#6517 = EDGE_CURVE('',#6495,#6418,#6518,.T.);+#6518 = SURFACE_CURVE('',#6519,(#6523,#6530),.PCURVE_S1.);+#6519 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6520,#6521,#6522),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6520 = CARTESIAN_POINT('',(-0.772080338812,0.103994494616,1.7000001));+#6521 = CARTESIAN_POINT('',(-0.790200591662,0.115615091552,1.7000001));+#6522 = CARTESIAN_POINT('',(-0.808419324147,0.121523869655,1.7000001));+#6523 = PCURVE('',#6456,#6524);+#6524 = DEFINITIONAL_REPRESENTATION('',(#6525),#6529);+#6525 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6526,#6527,#6528),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6526 = CARTESIAN_POINT('',(0.199322781346,0.24363861712));+#6527 = CARTESIAN_POINT('',(0.181202528497,0.255259214056));+#6528 = CARTESIAN_POINT('',(0.162983796012,0.261167992159));+#6529 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6530 = PCURVE('',#5427,#6531);+#6531 = DEFINITIONAL_REPRESENTATION('',(#6532),#6536);+#6532 = LINE('',#6533,#6534);+#6533 = CARTESIAN_POINT('',(0.,-0.1));+#6534 = VECTOR('',#6535,1.);+#6535 = DIRECTION('',(1.,0.));+#6536 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6537 = ORIENTED_EDGE('',*,*,#6440,.T.);+#6538 = ORIENTED_EDGE('',*,*,#6539,.T.);+#6539 = EDGE_CURVE('',#6441,#6540,#6542,.T.);+#6540 = VERTEX_POINT('',#6541);+#6541 = CARTESIAN_POINT('',(-0.889665023065,0.114334856296,1.7000001));+#6542 = SURFACE_CURVE('',#6543,(#6547,#6554),.PCURVE_S1.);+#6543 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6544,#6545,#6546),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6544 = CARTESIAN_POINT('',(-0.845152228021,0.127432647758,1.7000001));+#6545 = CARTESIAN_POINT('',(-0.873317403646,0.127432647758,1.7000001));+#6546 = CARTESIAN_POINT('',(-0.889665023065,0.114334856296,1.7000001));+#6547 = PCURVE('',#6456,#6548);+#6548 = DEFINITIONAL_REPRESENTATION('',(#6549),#6553);+#6549 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6550,#6551,#6552),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6550 = CARTESIAN_POINT('',(0.126250892137,0.267076770263));+#6551 = CARTESIAN_POINT('',(9.808571651236E-02,0.267076770263));+#6552 = CARTESIAN_POINT('',(8.173809709363E-02,0.253978978801));+#6553 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6554 = PCURVE('',#6363,#6555);+#6555 = DEFINITIONAL_REPRESENTATION('',(#6556),#6560);+#6556 = LINE('',#6557,#6558);+#6557 = CARTESIAN_POINT('',(0.,-0.1));+#6558 = VECTOR('',#6559,1.);+#6559 = DIRECTION('',(1.,0.));+#6560 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6561 = ORIENTED_EDGE('',*,*,#6562,.T.);+#6562 = EDGE_CURVE('',#6540,#6563,#6565,.T.);+#6563 = VERTEX_POINT('',#6564);+#6564 = CARTESIAN_POINT('',(-0.906012642484,7.898066731216E-02,1.7000001+ ));+#6565 = SURFACE_CURVE('',#6566,(#6570,#6577),.PCURVE_S1.);+#6566 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6567,#6568,#6569),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6567 = CARTESIAN_POINT('',(-0.889665023065,0.114334856296,1.7000001));+#6568 = CARTESIAN_POINT('',(-0.906012642484,0.101237064834,1.7000001));+#6569 = CARTESIAN_POINT('',(-0.906012642484,7.898066731216E-02,1.7000001+ ));+#6570 = PCURVE('',#6456,#6571);+#6571 = DEFINITIONAL_REPRESENTATION('',(#6572),#6576);+#6572 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6573,#6574,#6575),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6573 = CARTESIAN_POINT('',(8.173809709363E-02,0.253978978801));+#6574 = CARTESIAN_POINT('',(6.53904776749E-02,0.240881187339));+#6575 = CARTESIAN_POINT('',(6.53904776749E-02,0.218624789817));+#6576 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6577 = PCURVE('',#6324,#6578);+#6578 = DEFINITIONAL_REPRESENTATION('',(#6579),#6583);+#6579 = LINE('',#6580,#6581);+#6580 = CARTESIAN_POINT('',(0.,-0.1));+#6581 = VECTOR('',#6582,1.);+#6582 = DIRECTION('',(1.,0.));+#6583 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6584 = ORIENTED_EDGE('',*,*,#6585,.T.);+#6585 = EDGE_CURVE('',#6563,#6586,#6588,.T.);+#6586 = VERTEX_POINT('',#6587);+#6587 = CARTESIAN_POINT('',(-0.895278362263,4.923981752628E-02,1.7000001+ ));+#6588 = SURFACE_CURVE('',#6589,(#6593,#6600),.PCURVE_S1.);+#6589 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6590,#6591,#6592),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6590 = CARTESIAN_POINT('',(-0.906012642484,7.898066731216E-02,1.7000001+ ));+#6591 = CARTESIAN_POINT('',(-0.906012642484,5.948169957175E-02,1.7000001+ ));+#6592 = CARTESIAN_POINT('',(-0.895278362263,4.923981752628E-02,1.7000001+ ));+#6593 = PCURVE('',#6456,#6594);+#6594 = DEFINITIONAL_REPRESENTATION('',(#6595),#6599);+#6595 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6596,#6597,#6598),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6596 = CARTESIAN_POINT('',(6.53904776749E-02,0.218624789817));+#6597 = CARTESIAN_POINT('',(6.53904776749E-02,0.199125822076));+#6598 = CARTESIAN_POINT('',(7.612475789563E-02,0.188883940031));+#6599 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6600 = PCURVE('',#6282,#6601);+#6601 = DEFINITIONAL_REPRESENTATION('',(#6602),#6606);+#6602 = LINE('',#6603,#6604);+#6603 = CARTESIAN_POINT('',(0.,-0.1));+#6604 = VECTOR('',#6605,1.);+#6605 = DIRECTION('',(1.,0.));+#6606 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6607 = ORIENTED_EDGE('',*,*,#6608,.T.);+#6608 = EDGE_CURVE('',#6586,#6609,#6611,.T.);+#6609 = VERTEX_POINT('',#6610);+#6610 = CARTESIAN_POINT('',(-0.855197150796,3.210436102714E-02,1.7000001+ ));+#6611 = SURFACE_CURVE('',#6612,(#6616,#6623),.PCURVE_S1.);+#6612 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6613,#6614,#6615),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6613 = CARTESIAN_POINT('',(-0.895278362263,4.923981752628E-02,1.7000001+ ));+#6614 = CARTESIAN_POINT('',(-0.884544082042,3.899793548082E-02,1.7000001+ ));+#6615 = CARTESIAN_POINT('',(-0.855197150796,3.210436102714E-02,1.7000001+ ));+#6616 = PCURVE('',#6456,#6617);+#6617 = DEFINITIONAL_REPRESENTATION('',(#6618),#6622);+#6618 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6619,#6620,#6621),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6619 = CARTESIAN_POINT('',(7.612475789563E-02,0.188883940031));+#6620 = CARTESIAN_POINT('',(8.685903811636E-02,0.178642057985));+#6621 = CARTESIAN_POINT('',(0.116205969362,0.171748483532));+#6622 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6623 = PCURVE('',#6246,#6624);+#6624 = DEFINITIONAL_REPRESENTATION('',(#6625),#6629);+#6625 = LINE('',#6626,#6627);+#6626 = CARTESIAN_POINT('',(0.,-0.1));+#6627 = VECTOR('',#6628,1.);+#6628 = DIRECTION('',(1.,0.));+#6629 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6630 = ORIENTED_EDGE('',*,*,#6631,.T.);+#6631 = EDGE_CURVE('',#6609,#6632,#6634,.T.);+#6632 = VERTEX_POINT('',#6633);+#6633 = CARTESIAN_POINT('',(-0.834319468165,2.737733854461E-02,1.7000001+ ));+#6634 = SURFACE_CURVE('',#6635,(#6639,#6646),.PCURVE_S1.);+#6635 = LINE('',#6636,#6637);+#6636 = CARTESIAN_POINT('',(-0.855197150796,3.210436102714E-02,1.7000001+ ));+#6637 = VECTOR('',#6638,1.);+#6638 = DIRECTION('',(0.975313298974,-0.220825652598,0.));+#6639 = PCURVE('',#6456,#6640);+#6640 = DEFINITIONAL_REPRESENTATION('',(#6641),#6645);+#6641 = LINE('',#6642,#6643);+#6642 = CARTESIAN_POINT('',(0.116205969362,0.171748483532));+#6643 = VECTOR('',#6644,1.);+#6644 = DIRECTION('',(0.975313298974,-0.220825652598));+#6645 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6646 = PCURVE('',#6215,#6647);+#6647 = DEFINITIONAL_REPRESENTATION('',(#6648),#6652);+#6648 = LINE('',#6649,#6650);+#6649 = CARTESIAN_POINT('',(0.,-0.1));+#6650 = VECTOR('',#6651,1.);+#6651 = DIRECTION('',(1.,0.));+#6652 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6653 = ORIENTED_EDGE('',*,*,#6654,.T.);+#6654 = EDGE_CURVE('',#6632,#6655,#6657,.T.);+#6655 = VERTEX_POINT('',#6656);+#6656 = CARTESIAN_POINT('',(-0.774049931513,-2.954389051577E-03,+ 1.7000001));+#6657 = SURFACE_CURVE('',#6658,(#6662,#6669),.PCURVE_S1.);+#6658 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6659,#6660,#6661),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6659 = CARTESIAN_POINT('',(-0.834319468165,2.737733854461E-02,1.7000001+ ));+#6660 = CARTESIAN_POINT('',(-0.792958021443,1.772633430946E-02,1.7000001+ ));+#6661 = CARTESIAN_POINT('',(-0.774049931513,-2.954389051577E-03,+ 1.7000001));+#6662 = PCURVE('',#6456,#6663);+#6663 = DEFINITIONAL_REPRESENTATION('',(#6664),#6668);+#6664 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6665,#6666,#6667),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6665 = CARTESIAN_POINT('',(0.137083651993,0.167021461049));+#6666 = CARTESIAN_POINT('',(0.178445098715,0.157370456814));+#6667 = CARTESIAN_POINT('',(0.197353188645,0.136689733453));+#6668 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6669 = PCURVE('',#6183,#6670);+#6670 = DEFINITIONAL_REPRESENTATION('',(#6671),#6675);+#6671 = LINE('',#6672,#6673);+#6672 = CARTESIAN_POINT('',(0.,-0.1));+#6673 = VECTOR('',#6674,1.);+#6674 = DIRECTION('',(1.,0.));+#6675 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6676 = ORIENTED_EDGE('',*,*,#6677,.T.);+#6677 = EDGE_CURVE('',#6655,#6678,#6680,.T.);+#6678 = VERTEX_POINT('',#6679);+#6679 = CARTESIAN_POINT('',(-0.755141841583,-5.928474030165E-02,+ 1.7000001));+#6680 = SURFACE_CURVE('',#6681,(#6685,#6692),.PCURVE_S1.);+#6681 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6682,#6683,#6684),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6682 = CARTESIAN_POINT('',(-0.774049931513,-2.954389051577E-03,+ 1.7000001));+#6683 = CARTESIAN_POINT('',(-0.755141841583,-2.363511241262E-02,+ 1.7000001));+#6684 = CARTESIAN_POINT('',(-0.755141841583,-5.928474030165E-02,+ 1.7000001));+#6685 = PCURVE('',#6456,#6686);+#6686 = DEFINITIONAL_REPRESENTATION('',(#6687),#6691);+#6687 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6688,#6689,#6690),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6688 = CARTESIAN_POINT('',(0.197353188645,0.136689733453));+#6689 = CARTESIAN_POINT('',(0.216261278575,0.116009010092));+#6690 = CARTESIAN_POINT('',(0.216261278575,8.035938220289E-02));+#6691 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6692 = PCURVE('',#6147,#6693);+#6693 = DEFINITIONAL_REPRESENTATION('',(#6694),#6698);+#6694 = LINE('',#6695,#6696);+#6695 = CARTESIAN_POINT('',(0.,-0.1));+#6696 = VECTOR('',#6697,1.);+#6697 = DIRECTION('',(1.,0.));+#6698 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6699 = ORIENTED_EDGE('',*,*,#6700,.T.);+#6700 = EDGE_CURVE('',#6678,#6701,#6703,.T.);+#6701 = VERTEX_POINT('',#6702);+#6702 = CARTESIAN_POINT('',(-0.781140465237,-0.123296503086,1.7000001));+#6703 = SURFACE_CURVE('',#6704,(#6708,#6715),.PCURVE_S1.);+#6704 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6705,#6706,#6707),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6705 = CARTESIAN_POINT('',(-0.755141841583,-5.928474030165E-02,+ 1.7000001));+#6706 = CARTESIAN_POINT('',(-0.755141841583,-0.101237064834,1.7000001));+#6707 = CARTESIAN_POINT('',(-0.781140465237,-0.123296503086,1.7000001));+#6708 = PCURVE('',#6456,#6709);+#6709 = DEFINITIONAL_REPRESENTATION('',(#6710),#6714);+#6710 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6711,#6712,#6713),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6711 = CARTESIAN_POINT('',(0.216261278575,8.035938220289E-02));+#6712 = CARTESIAN_POINT('',(0.216261278575,3.84070576705E-02));+#6713 = CARTESIAN_POINT('',(0.190262654922,1.634761941873E-02));+#6714 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6715 = PCURVE('',#6108,#6716);+#6716 = DEFINITIONAL_REPRESENTATION('',(#6717),#6721);+#6717 = LINE('',#6718,#6719);+#6718 = CARTESIAN_POINT('',(0.,-0.1));+#6719 = VECTOR('',#6720,1.);+#6720 = DIRECTION('',(1.,0.));+#6721 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6722 = ORIENTED_EDGE('',*,*,#6723,.T.);+#6723 = EDGE_CURVE('',#6701,#6724,#6726,.T.);+#6724 = VERTEX_POINT('',#6725);+#6725 = CARTESIAN_POINT('',(-0.856772824957,-0.145355941338,1.7000001));+#6726 = SURFACE_CURVE('',#6727,(#6731,#6738),.PCURVE_S1.);+#6727 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6728,#6729,#6730),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6728 = CARTESIAN_POINT('',(-0.781140465237,-0.123296503086,1.7000001));+#6729 = CARTESIAN_POINT('',(-0.807139088891,-0.145355941338,1.7000001));+#6730 = CARTESIAN_POINT('',(-0.856772824957,-0.145355941338,1.7000001));+#6731 = PCURVE('',#6456,#6732);+#6732 = DEFINITIONAL_REPRESENTATION('',(#6733),#6737);+#6733 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6734,#6735,#6736),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6734 = CARTESIAN_POINT('',(0.190262654922,1.634761941873E-02));+#6735 = CARTESIAN_POINT('',(0.164264031268,-5.711818833049E-03));+#6736 = CARTESIAN_POINT('',(0.114630295201,-5.711818833049E-03));+#6737 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6738 = PCURVE('',#6066,#6739);+#6739 = DEFINITIONAL_REPRESENTATION('',(#6740),#6744);+#6740 = LINE('',#6741,#6742);+#6741 = CARTESIAN_POINT('',(0.,-0.1));+#6742 = VECTOR('',#6743,1.);+#6743 = DIRECTION('',(1.,0.));+#6744 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6745 = ORIENTED_EDGE('',*,*,#6746,.T.);+#6746 = EDGE_CURVE('',#6724,#6747,#6749,.T.);+#6747 = VERTEX_POINT('',#6748);+#6748 = CARTESIAN_POINT('',(-0.89833123095,-0.14092435776,1.7000001));+#6749 = SURFACE_CURVE('',#6750,(#6754,#6761),.PCURVE_S1.);+#6750 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6751,#6752,#6753),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6751 = CARTESIAN_POINT('',(-0.856772824957,-0.145355941338,1.7000001));+#6752 = CARTESIAN_POINT('',(-0.877453548318,-0.145355941338,1.7000001));+#6753 = CARTESIAN_POINT('',(-0.89833123095,-0.14092435776,1.7000001));+#6754 = PCURVE('',#6456,#6755);+#6755 = DEFINITIONAL_REPRESENTATION('',(#6756),#6760);+#6756 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6757,#6758,#6759),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6757 = CARTESIAN_POINT('',(0.114630295201,-5.711818833049E-03));+#6758 = CARTESIAN_POINT('',(9.394957184015E-02,-5.711818833049E-03));+#6759 = CARTESIAN_POINT('',(7.3071889209E-02,-1.280235255683E-03));+#6760 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6761 = PCURVE('',#6030,#6762);+#6762 = DEFINITIONAL_REPRESENTATION('',(#6763),#6767);+#6763 = LINE('',#6764,#6765);+#6764 = CARTESIAN_POINT('',(0.,-0.1));+#6765 = VECTOR('',#6766,1.);+#6766 = DIRECTION('',(1.,0.));+#6767 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6768 = ORIENTED_EDGE('',*,*,#6769,.T.);+#6769 = EDGE_CURVE('',#6747,#6770,#6772,.T.);+#6770 = VERTEX_POINT('',#6771);+#6771 = CARTESIAN_POINT('',(-0.940283555482,-0.127629607028,1.7000001));+#6772 = SURFACE_CURVE('',#6773,(#6777,#6784),.PCURVE_S1.);+#6773 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6774,#6775,#6776),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6774 = CARTESIAN_POINT('',(-0.89833123095,-0.14092435776,1.7000001));+#6775 = CARTESIAN_POINT('',(-0.919208913581,-0.136492774183,1.7000001));+#6776 = CARTESIAN_POINT('',(-0.940283555482,-0.127629607028,1.7000001));+#6777 = PCURVE('',#6456,#6778);+#6778 = DEFINITIONAL_REPRESENTATION('',(#6779),#6783);+#6779 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6780,#6781,#6782),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6780 = CARTESIAN_POINT('',(7.3071889209E-02,-1.280235255683E-03));+#6781 = CARTESIAN_POINT('',(5.219420657786E-02,3.151348321682E-03));+#6782 = CARTESIAN_POINT('',(3.111956467661E-02,1.201451547641E-02));+#6783 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6784 = PCURVE('',#5994,#6785);+#6785 = DEFINITIONAL_REPRESENTATION('',(#6786),#6790);+#6786 = LINE('',#6787,#6788);+#6787 = CARTESIAN_POINT('',(0.,-0.1));+#6788 = VECTOR('',#6789,1.);+#6789 = DIRECTION('',(1.,0.));+#6790 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6791 = ORIENTED_EDGE('',*,*,#6792,.T.);+#6792 = EDGE_CURVE('',#6770,#6793,#6795,.T.);+#6793 = VERTEX_POINT('',#6794);+#6794 = CARTESIAN_POINT('',(-0.940283555482,-8.528336395552E-02,+ 1.7000001));+#6795 = SURFACE_CURVE('',#6796,(#6800,#6807),.PCURVE_S1.);+#6796 = LINE('',#6797,#6798);+#6797 = CARTESIAN_POINT('',(-0.940283555482,-0.127629607028,1.7000001));+#6798 = VECTOR('',#6799,1.);+#6799 = DIRECTION('',(0.,1.,0.));+#6800 = PCURVE('',#6456,#6801);+#6801 = DEFINITIONAL_REPRESENTATION('',(#6802),#6806);+#6802 = LINE('',#6803,#6804);+#6803 = CARTESIAN_POINT('',(3.111956467661E-02,1.201451547641E-02));+#6804 = VECTOR('',#6805,1.);+#6805 = DIRECTION('',(0.,1.));+#6806 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6807 = PCURVE('',#5963,#6808);+#6808 = DEFINITIONAL_REPRESENTATION('',(#6809),#6813);+#6809 = LINE('',#6810,#6811);+#6810 = CARTESIAN_POINT('',(0.,-0.1));+#6811 = VECTOR('',#6812,1.);+#6812 = DIRECTION('',(1.,0.));+#6813 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6814 = ORIENTED_EDGE('',*,*,#6815,.T.);+#6815 = EDGE_CURVE('',#6793,#6816,#6818,.T.);+#6816 = VERTEX_POINT('',#6817);+#6817 = CARTESIAN_POINT('',(-0.897444914234,-0.106358005857,1.7000001));+#6818 = SURFACE_CURVE('',#6819,(#6823,#6830),.PCURVE_S1.);+#6819 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6820,#6821,#6822),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6820 = CARTESIAN_POINT('',(-0.940283555482,-8.528336395552E-02,+ 1.7000001));+#6821 = CARTESIAN_POINT('',(-0.91763323942,-9.96613906732E-02,1.7000001)+ );+#6822 = CARTESIAN_POINT('',(-0.897444914234,-0.106358005857,1.7000001));+#6823 = PCURVE('',#6456,#6824);+#6824 = DEFINITIONAL_REPRESENTATION('',(#6825),#6829);+#6825 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6826,#6827,#6828),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6826 = CARTESIAN_POINT('',(3.111956467661E-02,5.436075854902E-02));+#6827 = CARTESIAN_POINT('',(5.37698807387E-02,3.998273183134E-02));+#6828 = CARTESIAN_POINT('',(7.395820592448E-02,3.328611664777E-02));+#6829 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6830 = PCURVE('',#5931,#6831);+#6831 = DEFINITIONAL_REPRESENTATION('',(#6832),#6836);+#6832 = LINE('',#6833,#6834);+#6833 = CARTESIAN_POINT('',(0.,-0.1));+#6834 = VECTOR('',#6835,1.);+#6835 = DIRECTION('',(1.,0.));+#6836 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6837 = ORIENTED_EDGE('',*,*,#6838,.T.);+#6838 = EDGE_CURVE('',#6816,#6839,#6841,.T.);+#6839 = VERTEX_POINT('',#6840);+#6840 = CARTESIAN_POINT('',(-0.856772824957,-0.11305462104,1.7000001));+#6841 = SURFACE_CURVE('',#6842,(#6846,#6853),.PCURVE_S1.);+#6842 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6843,#6844,#6845),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6843 = CARTESIAN_POINT('',(-0.897444914234,-0.106358005857,1.7000001));+#6844 = CARTESIAN_POINT('',(-0.877256589048,-0.11305462104,1.7000001));+#6845 = CARTESIAN_POINT('',(-0.856772824957,-0.11305462104,1.7000001));+#6846 = PCURVE('',#6456,#6847);+#6847 = DEFINITIONAL_REPRESENTATION('',(#6848),#6852);+#6848 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6849,#6850,#6851),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6849 = CARTESIAN_POINT('',(7.395820592448E-02,3.328611664777E-02));+#6850 = CARTESIAN_POINT('',(9.414653111025E-02,2.658950146419E-02));+#6851 = CARTESIAN_POINT('',(0.114630295201,2.658950146419E-02));+#6852 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6853 = PCURVE('',#5895,#6854);+#6854 = DEFINITIONAL_REPRESENTATION('',(#6855),#6859);+#6855 = LINE('',#6856,#6857);+#6856 = CARTESIAN_POINT('',(0.,-0.1));+#6857 = VECTOR('',#6858,1.);+#6858 = DIRECTION('',(1.,0.));+#6859 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6860 = ORIENTED_EDGE('',*,*,#6861,.T.);+#6861 = EDGE_CURVE('',#6839,#6862,#6864,.T.);+#6862 = VERTEX_POINT('',#6863);+#6863 = CARTESIAN_POINT('',(-0.809896518672,-9.956291103814E-02,+ 1.7000001));+#6864 = SURFACE_CURVE('',#6865,(#6869,#6876),.PCURVE_S1.);+#6865 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6866,#6867,#6868),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6866 = CARTESIAN_POINT('',(-0.856772824957,-0.11305462104,1.7000001));+#6867 = CARTESIAN_POINT('',(-0.826638056631,-0.11305462104,1.7000001));+#6868 = CARTESIAN_POINT('',(-0.809896518672,-9.956291103814E-02,+ 1.7000001));+#6869 = PCURVE('',#6456,#6870);+#6870 = DEFINITIONAL_REPRESENTATION('',(#6871),#6875);+#6871 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6872,#6873,#6874),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6872 = CARTESIAN_POINT('',(0.114630295201,2.658950146419E-02));+#6873 = CARTESIAN_POINT('',(0.144765063527,2.658950146419E-02));+#6874 = CARTESIAN_POINT('',(0.161506601486,4.008121146639E-02));+#6875 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6876 = PCURVE('',#5859,#6877);+#6877 = DEFINITIONAL_REPRESENTATION('',(#6878),#6882);+#6878 = LINE('',#6879,#6880);+#6879 = CARTESIAN_POINT('',(0.,-0.1));+#6880 = VECTOR('',#6881,1.);+#6881 = DIRECTION('',(1.,0.));+#6882 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6883 = ORIENTED_EDGE('',*,*,#6884,.T.);+#6884 = EDGE_CURVE('',#6862,#6885,#6887,.T.);+#6885 = VERTEX_POINT('',#6886);+#6886 = CARTESIAN_POINT('',(-0.793154980713,-6.184521081301E-02,+ 1.7000001));+#6887 = SURFACE_CURVE('',#6888,(#6892,#6899),.PCURVE_S1.);+#6888 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6889,#6890,#6891),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6889 = CARTESIAN_POINT('',(-0.809896518672,-9.956291103814E-02,+ 1.7000001));+#6890 = CARTESIAN_POINT('',(-0.793154980713,-8.607120103594E-02,+ 1.7000001));+#6891 = CARTESIAN_POINT('',(-0.793154980713,-6.184521081301E-02,+ 1.7000001));+#6892 = PCURVE('',#6456,#6893);+#6893 = DEFINITIONAL_REPRESENTATION('',(#6894),#6898);+#6894 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6895,#6896,#6897),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6895 = CARTESIAN_POINT('',(0.161506601486,4.008121146639E-02));+#6896 = CARTESIAN_POINT('',(0.178248139445,5.35729214686E-02));+#6897 = CARTESIAN_POINT('',(0.178248139445,7.779891169153E-02));+#6898 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6899 = PCURVE('',#5820,#6900);+#6900 = DEFINITIONAL_REPRESENTATION('',(#6901),#6905);+#6901 = LINE('',#6902,#6903);+#6902 = CARTESIAN_POINT('',(0.,-0.1));+#6903 = VECTOR('',#6904,1.);+#6904 = DIRECTION('',(1.,0.));+#6905 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6906 = ORIENTED_EDGE('',*,*,#6907,.T.);+#6907 = EDGE_CURVE('',#6885,#6908,#6910,.T.);+#6908 = VERTEX_POINT('',#6909);+#6909 = CARTESIAN_POINT('',(-0.804677098015,-2.816517562503E-02,+ 1.7000001));+#6910 = SURFACE_CURVE('',#6911,(#6915,#6922),.PCURVE_S1.);+#6911 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6912,#6913,#6914),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6912 = CARTESIAN_POINT('',(-0.793154980713,-6.184521081301E-02,+ 1.7000001));+#6913 = CARTESIAN_POINT('',(-0.793154980713,-3.978577256124E-02,+ 1.7000001));+#6914 = CARTESIAN_POINT('',(-0.804677098015,-2.816517562503E-02,+ 1.7000001));+#6915 = PCURVE('',#6456,#6916);+#6916 = DEFINITIONAL_REPRESENTATION('',(#6917),#6921);+#6917 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6918,#6919,#6920),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6918 = CARTESIAN_POINT('',(0.178248139445,7.779891169153E-02));+#6919 = CARTESIAN_POINT('',(0.178248139445,9.98583499433E-02));+#6920 = CARTESIAN_POINT('',(0.166726022144,0.11147894688));+#6921 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6922 = PCURVE('',#5778,#6923);+#6923 = DEFINITIONAL_REPRESENTATION('',(#6924),#6928);+#6924 = LINE('',#6925,#6926);+#6925 = CARTESIAN_POINT('',(0.,-0.1));+#6926 = VECTOR('',#6927,1.);+#6927 = DIRECTION('',(1.,0.));+#6928 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6929 = ORIENTED_EDGE('',*,*,#6930,.T.);+#6930 = EDGE_CURVE('',#6908,#6931,#6933,.T.);+#6931 = VERTEX_POINT('',#6932);+#6932 = CARTESIAN_POINT('',(-0.844758309481,-1.024188204547E-02,+ 1.7000001));+#6933 = SURFACE_CURVE('',#6934,(#6938,#6945),.PCURVE_S1.);+#6934 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6935,#6936,#6937),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6935 = CARTESIAN_POINT('',(-0.804677098015,-2.816517562503E-02,+ 1.7000001));+#6936 = CARTESIAN_POINT('',(-0.816199215316,-1.654457868883E-02,+ 1.7000001));+#6937 = CARTESIAN_POINT('',(-0.844758309481,-1.024188204547E-02,+ 1.7000001));+#6938 = PCURVE('',#6456,#6939);+#6939 = DEFINITIONAL_REPRESENTATION('',(#6940),#6944);+#6940 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6941,#6942,#6943),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6941 = CARTESIAN_POINT('',(0.166726022144,0.11147894688));+#6942 = CARTESIAN_POINT('',(0.155203904843,0.123099543816));+#6943 = CARTESIAN_POINT('',(0.126644810678,0.129402240459));+#6944 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6945 = PCURVE('',#5742,#6946);+#6946 = DEFINITIONAL_REPRESENTATION('',(#6947),#6951);+#6947 = LINE('',#6948,#6949);+#6948 = CARTESIAN_POINT('',(0.,-0.1));+#6949 = VECTOR('',#6950,1.);+#6950 = DIRECTION('',(1.,0.));+#6951 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6952 = ORIENTED_EDGE('',*,*,#6953,.T.);+#6953 = EDGE_CURVE('',#6931,#6954,#6956,.T.);+#6954 = VERTEX_POINT('',#6955);+#6955 = CARTESIAN_POINT('',(-0.866029910652,-5.317900292839E-03,+ 1.7000001));+#6956 = SURFACE_CURVE('',#6957,(#6961,#6968),.PCURVE_S1.);+#6957 = LINE('',#6958,#6959);+#6958 = CARTESIAN_POINT('',(-0.844758309481,-1.024188204547E-02,+ 1.7000001));+#6959 = VECTOR('',#6960,1.);+#6960 = DIRECTION('',(-0.97423893818,0.225518272727,0.));+#6961 = PCURVE('',#6456,#6962);+#6962 = DEFINITIONAL_REPRESENTATION('',(#6963),#6967);+#6963 = LINE('',#6964,#6965);+#6964 = CARTESIAN_POINT('',(0.126644810678,0.129402240459));+#6965 = VECTOR('',#6966,1.);+#6966 = DIRECTION('',(-0.97423893818,0.225518272727));+#6967 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6968 = PCURVE('',#5711,#6969);+#6969 = DEFINITIONAL_REPRESENTATION('',(#6970),#6974);+#6970 = LINE('',#6971,#6972);+#6971 = CARTESIAN_POINT('',(0.,-0.1));+#6972 = VECTOR('',#6973,1.);+#6973 = DIRECTION('',(1.,0.));+#6974 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6975 = ORIENTED_EDGE('',*,*,#6976,.T.);+#6976 = EDGE_CURVE('',#6954,#6977,#6979,.T.);+#6977 = VERTEX_POINT('',#6978);+#6978 = CARTESIAN_POINT('',(-0.925511610224,2.265031606209E-02,1.7000001+ ));+#6979 = SURFACE_CURVE('',#6980,(#6984,#6991),.PCURVE_S1.);+#6980 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6981,#6982,#6983),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6981 = CARTESIAN_POINT('',(-0.866029910652,-5.317900292839E-03,+ 1.7000001));+#6982 = CARTESIAN_POINT('',(-0.906997438834,3.939185402103E-03,1.7000001+ ));+#6983 = CARTESIAN_POINT('',(-0.925511610224,2.265031606209E-02,1.7000001+ ));+#6984 = PCURVE('',#6456,#6985);+#6985 = DEFINITIONAL_REPRESENTATION('',(#6986),#6990);+#6986 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6987,#6988,#6989),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6987 = CARTESIAN_POINT('',(0.105373209506,0.134326222212));+#6988 = CARTESIAN_POINT('',(6.440568132438E-02,0.143583307907));+#6989 = CARTESIAN_POINT('',(4.58915099345E-02,0.162294438567));+#6990 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6991 = PCURVE('',#5679,#6992);+#6992 = DEFINITIONAL_REPRESENTATION('',(#6993),#6997);+#6993 = LINE('',#6994,#6995);+#6994 = CARTESIAN_POINT('',(0.,-0.1));+#6995 = VECTOR('',#6996,1.);+#6996 = DIRECTION('',(1.,0.));+#6997 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6998 = ORIENTED_EDGE('',*,*,#6999,.T.);+#6999 = EDGE_CURVE('',#6977,#7000,#7002,.T.);+#7000 = VERTEX_POINT('',#7001);+#7001 = CARTESIAN_POINT('',(-0.944025781614,7.28749299389E-02,1.7000001)+ );+#7002 = SURFACE_CURVE('',#7003,(#7007,#7014),.PCURVE_S1.);+#7003 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7004,#7005,#7006),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7004 = CARTESIAN_POINT('',(-0.925511610224,2.265031606209E-02,1.7000001+ ));+#7005 = CARTESIAN_POINT('',(-0.944025781614,4.136144672208E-02,1.7000001+ ));+#7006 = CARTESIAN_POINT('',(-0.944025781614,7.28749299389E-02,1.7000001)+ );+#7007 = PCURVE('',#6456,#7008);+#7008 = DEFINITIONAL_REPRESENTATION('',(#7009),#7013);+#7009 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7010,#7011,#7012),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7010 = CARTESIAN_POINT('',(4.58915099345E-02,0.162294438567));+#7011 = CARTESIAN_POINT('',(2.737733854461E-02,0.181005569227));+#7012 = CARTESIAN_POINT('',(2.737733854461E-02,0.212519052443));+#7013 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7014 = PCURVE('',#5643,#7015);+#7015 = DEFINITIONAL_REPRESENTATION('',(#7016),#7020);+#7016 = LINE('',#7017,#7018);+#7017 = CARTESIAN_POINT('',(0.,-0.1));+#7018 = VECTOR('',#7019,1.);+#7019 = DIRECTION('',(1.,0.));+#7020 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7021 = ORIENTED_EDGE('',*,*,#7022,.T.);+#7022 = EDGE_CURVE('',#7000,#7023,#7025,.T.);+#7023 = VERTEX_POINT('',#7024);+#7024 = CARTESIAN_POINT('',(-0.917534759785,0.136000376008,1.7000001));+#7025 = SURFACE_CURVE('',#7026,(#7030,#7037),.PCURVE_S1.);+#7026 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7027,#7028,#7029),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7027 = CARTESIAN_POINT('',(-0.944025781614,7.28749299389E-02,1.7000001)+ );+#7028 = CARTESIAN_POINT('',(-0.944025781614,0.11226678396,1.7000001));+#7029 = CARTESIAN_POINT('',(-0.917534759785,0.136000376008,1.7000001));+#7030 = PCURVE('',#6456,#7031);+#7031 = DEFINITIONAL_REPRESENTATION('',(#7032),#7036);+#7032 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7033,#7034,#7035),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7033 = CARTESIAN_POINT('',(2.737733854461E-02,0.212519052443));+#7034 = CARTESIAN_POINT('',(2.737733854461E-02,0.251910906464));+#7035 = CARTESIAN_POINT('',(5.386836037375E-02,0.275644498512));+#7036 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7037 = PCURVE('',#5604,#7038);+#7038 = DEFINITIONAL_REPRESENTATION('',(#7039),#7043);+#7039 = LINE('',#7040,#7041);+#7040 = CARTESIAN_POINT('',(0.,-0.1));+#7041 = VECTOR('',#7042,1.);+#7042 = DIRECTION('',(1.,0.));+#7043 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7044 = ORIENTED_EDGE('',*,*,#7045,.T.);+#7045 = EDGE_CURVE('',#7023,#7046,#7048,.T.);+#7046 = VERTEX_POINT('',#7047);+#7047 = CARTESIAN_POINT('',(-0.847121820722,0.159733968055,1.7000001));+#7048 = SURFACE_CURVE('',#7049,(#7053,#7060),.PCURVE_S1.);+#7049 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7050,#7051,#7052),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7050 = CARTESIAN_POINT('',(-0.917534759785,0.136000376008,1.7000001));+#7051 = CARTESIAN_POINT('',(-0.891043737956,0.159733968055,1.7000001));+#7052 = CARTESIAN_POINT('',(-0.847121820722,0.159733968055,1.7000001));+#7053 = PCURVE('',#6456,#7054);+#7054 = DEFINITIONAL_REPRESENTATION('',(#7055),#7059);+#7055 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7056,#7057,#7058),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7056 = CARTESIAN_POINT('',(5.386836037375E-02,0.275644498512));+#7057 = CARTESIAN_POINT('',(8.035938220289E-02,0.29937809056));+#7058 = CARTESIAN_POINT('',(0.124281299436,0.29937809056));+#7059 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7060 = PCURVE('',#5562,#7061);+#7061 = DEFINITIONAL_REPRESENTATION('',(#7062),#7066);+#7062 = LINE('',#7063,#7064);+#7063 = CARTESIAN_POINT('',(0.,-0.1));+#7064 = VECTOR('',#7065,1.);+#7065 = DIRECTION('',(1.,0.));+#7066 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7067 = ORIENTED_EDGE('',*,*,#7068,.T.);+#7068 = EDGE_CURVE('',#7046,#7069,#7071,.T.);+#7069 = VERTEX_POINT('',#7070);+#7070 = CARTESIAN_POINT('',(-0.811472192833,0.155893262288,1.7000001));+#7071 = SURFACE_CURVE('',#7072,(#7076,#7083),.PCURVE_S1.);+#7072 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7073,#7074,#7075),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7073 = CARTESIAN_POINT('',(-0.847121820722,0.159733968055,1.7000001));+#7074 = CARTESIAN_POINT('',(-0.830183323493,0.159733968055,1.7000001));+#7075 = CARTESIAN_POINT('',(-0.811472192833,0.155893262288,1.7000001));+#7076 = PCURVE('',#6456,#7077);+#7077 = DEFINITIONAL_REPRESENTATION('',(#7078),#7082);+#7078 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7079,#7080,#7081),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7079 = CARTESIAN_POINT('',(0.124281299436,0.29937809056));+#7080 = CARTESIAN_POINT('',(0.141219796665,0.29937809056));+#7081 = CARTESIAN_POINT('',(0.159930927325,0.295537384793));+#7082 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7083 = PCURVE('',#5526,#7084);+#7084 = DEFINITIONAL_REPRESENTATION('',(#7085),#7089);+#7085 = LINE('',#7086,#7087);+#7086 = CARTESIAN_POINT('',(0.,-0.1));+#7087 = VECTOR('',#7088,1.);+#7088 = DIRECTION('',(1.,0.));+#7089 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7090 = ORIENTED_EDGE('',*,*,#7091,.T.);+#7091 = EDGE_CURVE('',#7069,#6493,#7092,.T.);+#7092 = SURFACE_CURVE('',#7093,(#7097,#7104),.PCURVE_S1.);+#7093 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7094,#7095,#7096),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7094 = CARTESIAN_POINT('',(-0.811472192833,0.155893262288,1.7000001));+#7095 = CARTESIAN_POINT('',(-0.792761062173,0.152052556521,1.7000001));+#7096 = CARTESIAN_POINT('',(-0.772080338812,0.144371144987,1.7000001));+#7097 = PCURVE('',#6456,#7098);+#7098 = DEFINITIONAL_REPRESENTATION('',(#7099),#7103);+#7099 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7100,#7101,#7102),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7100 = CARTESIAN_POINT('',(0.159930927325,0.295537384793));+#7101 = CARTESIAN_POINT('',(0.178642057985,0.291696679026));+#7102 = CARTESIAN_POINT('',(0.199322781346,0.284015267492));+#7103 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7104 = PCURVE('',#5490,#7105);+#7105 = DEFINITIONAL_REPRESENTATION('',(#7106),#7110);+#7106 = LINE('',#7107,#7108);+#7107 = CARTESIAN_POINT('',(0.,-0.1));+#7108 = VECTOR('',#7109,1.);+#7109 = DIRECTION('',(1.,0.));+#7110 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7111 = ADVANCED_FACE('',(#7112),#6363,.T.);+#7112 = FACE_BOUND('',#7113,.T.);+#7113 = EDGE_LOOP('',(#7114,#7115,#7116,#7117));+#7114 = ORIENTED_EDGE('',*,*,#6343,.T.);+#7115 = ORIENTED_EDGE('',*,*,#6468,.T.);+#7116 = ORIENTED_EDGE('',*,*,#6539,.T.);+#7117 = ORIENTED_EDGE('',*,*,#7118,.F.);+#7118 = EDGE_CURVE('',#6299,#6540,#7119,.T.);+#7119 = SURFACE_CURVE('',#7120,(#7124,#7131),.PCURVE_S1.);+#7120 = LINE('',#7121,#7122);+#7121 = CARTESIAN_POINT('',(-0.889665023065,0.114334856296,1.8000001));+#7122 = VECTOR('',#7123,1.);+#7123 = DIRECTION('',(-0.,-0.,-1.));+#7124 = PCURVE('',#6363,#7125);+#7125 = DEFINITIONAL_REPRESENTATION('',(#7126),#7130);+#7126 = LINE('',#7127,#7128);+#7127 = CARTESIAN_POINT('',(1.,0.));+#7128 = VECTOR('',#7129,1.);+#7129 = DIRECTION('',(0.,-1.));+#7130 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7131 = PCURVE('',#6324,#7132);+#7132 = DEFINITIONAL_REPRESENTATION('',(#7133),#7137);+#7133 = LINE('',#7134,#7135);+#7134 = CARTESIAN_POINT('',(0.,0.));+#7135 = VECTOR('',#7136,1.);+#7136 = DIRECTION('',(0.,-1.));+#7137 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7138 = ADVANCED_FACE('',(#7139),#6324,.T.);+#7139 = FACE_BOUND('',#7140,.T.);+#7140 = EDGE_LOOP('',(#7141,#7142,#7143,#7144));+#7141 = ORIENTED_EDGE('',*,*,#6298,.T.);+#7142 = ORIENTED_EDGE('',*,*,#7118,.T.);+#7143 = ORIENTED_EDGE('',*,*,#6562,.T.);+#7144 = ORIENTED_EDGE('',*,*,#7145,.F.);+#7145 = EDGE_CURVE('',#6263,#6563,#7146,.T.);+#7146 = SURFACE_CURVE('',#7147,(#7151,#7158),.PCURVE_S1.);+#7147 = LINE('',#7148,#7149);+#7148 = CARTESIAN_POINT('',(-0.906012642484,7.898066731216E-02,1.8000001+ ));+#7149 = VECTOR('',#7150,1.);+#7150 = DIRECTION('',(-0.,-0.,-1.));+#7151 = PCURVE('',#6324,#7152);+#7152 = DEFINITIONAL_REPRESENTATION('',(#7153),#7157);+#7153 = LINE('',#7154,#7155);+#7154 = CARTESIAN_POINT('',(1.,0.));+#7155 = VECTOR('',#7156,1.);+#7156 = DIRECTION('',(0.,-1.));+#7157 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7158 = PCURVE('',#6282,#7159);+#7159 = DEFINITIONAL_REPRESENTATION('',(#7160),#7164);+#7160 = LINE('',#7161,#7162);+#7161 = CARTESIAN_POINT('',(0.,0.));+#7162 = VECTOR('',#7163,1.);+#7163 = DIRECTION('',(0.,-1.));+#7164 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7165 = ADVANCED_FACE('',(#7166),#6282,.T.);+#7166 = FACE_BOUND('',#7167,.T.);+#7167 = EDGE_LOOP('',(#7168,#7169,#7170,#7171));+#7168 = ORIENTED_EDGE('',*,*,#6262,.T.);+#7169 = ORIENTED_EDGE('',*,*,#7145,.T.);+#7170 = ORIENTED_EDGE('',*,*,#6585,.T.);+#7171 = ORIENTED_EDGE('',*,*,#7172,.F.);+#7172 = EDGE_CURVE('',#6227,#6586,#7173,.T.);+#7173 = SURFACE_CURVE('',#7174,(#7178,#7185),.PCURVE_S1.);+#7174 = LINE('',#7175,#7176);+#7175 = CARTESIAN_POINT('',(-0.895278362263,4.923981752628E-02,1.8000001+ ));+#7176 = VECTOR('',#7177,1.);+#7177 = DIRECTION('',(-0.,-0.,-1.));+#7178 = PCURVE('',#6282,#7179);+#7179 = DEFINITIONAL_REPRESENTATION('',(#7180),#7184);+#7180 = LINE('',#7181,#7182);+#7181 = CARTESIAN_POINT('',(1.,0.));+#7182 = VECTOR('',#7183,1.);+#7183 = DIRECTION('',(0.,-1.));+#7184 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7185 = PCURVE('',#6246,#7186);+#7186 = DEFINITIONAL_REPRESENTATION('',(#7187),#7191);+#7187 = LINE('',#7188,#7189);+#7188 = CARTESIAN_POINT('',(0.,0.));+#7189 = VECTOR('',#7190,1.);+#7190 = DIRECTION('',(0.,-1.));+#7191 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7192 = ADVANCED_FACE('',(#7193),#6246,.T.);+#7193 = FACE_BOUND('',#7194,.T.);+#7194 = EDGE_LOOP('',(#7195,#7196,#7197,#7198));+#7195 = ORIENTED_EDGE('',*,*,#6226,.T.);+#7196 = ORIENTED_EDGE('',*,*,#7172,.T.);+#7197 = ORIENTED_EDGE('',*,*,#6608,.T.);+#7198 = ORIENTED_EDGE('',*,*,#7199,.F.);+#7199 = EDGE_CURVE('',#6200,#6609,#7200,.T.);+#7200 = SURFACE_CURVE('',#7201,(#7205,#7212),.PCURVE_S1.);+#7201 = LINE('',#7202,#7203);+#7202 = CARTESIAN_POINT('',(-0.855197150796,3.210436102714E-02,1.8000001+ ));+#7203 = VECTOR('',#7204,1.);+#7204 = DIRECTION('',(-0.,-0.,-1.));+#7205 = PCURVE('',#6246,#7206);+#7206 = DEFINITIONAL_REPRESENTATION('',(#7207),#7211);+#7207 = LINE('',#7208,#7209);+#7208 = CARTESIAN_POINT('',(1.,0.));+#7209 = VECTOR('',#7210,1.);+#7210 = DIRECTION('',(0.,-1.));+#7211 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7212 = PCURVE('',#6215,#7213);+#7213 = DEFINITIONAL_REPRESENTATION('',(#7214),#7218);+#7214 = LINE('',#7215,#7216);+#7215 = CARTESIAN_POINT('',(0.,0.));+#7216 = VECTOR('',#7217,1.);+#7217 = DIRECTION('',(0.,-1.));+#7218 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7219 = ADVANCED_FACE('',(#7220),#6215,.T.);+#7220 = FACE_BOUND('',#7221,.T.);+#7221 = EDGE_LOOP('',(#7222,#7223,#7224,#7225));+#7222 = ORIENTED_EDGE('',*,*,#6199,.T.);+#7223 = ORIENTED_EDGE('',*,*,#7199,.T.);+#7224 = ORIENTED_EDGE('',*,*,#6631,.T.);+#7225 = ORIENTED_EDGE('',*,*,#7226,.F.);+#7226 = EDGE_CURVE('',#6164,#6632,#7227,.T.);+#7227 = SURFACE_CURVE('',#7228,(#7232,#7239),.PCURVE_S1.);+#7228 = LINE('',#7229,#7230);+#7229 = CARTESIAN_POINT('',(-0.834319468165,2.737733854461E-02,1.8000001+ ));+#7230 = VECTOR('',#7231,1.);+#7231 = DIRECTION('',(-0.,-0.,-1.));+#7232 = PCURVE('',#6215,#7233);+#7233 = DEFINITIONAL_REPRESENTATION('',(#7234),#7238);+#7234 = LINE('',#7235,#7236);+#7235 = CARTESIAN_POINT('',(2.140612934645E-02,0.));+#7236 = VECTOR('',#7237,1.);+#7237 = DIRECTION('',(0.,-1.));+#7238 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7239 = PCURVE('',#6183,#7240);+#7240 = DEFINITIONAL_REPRESENTATION('',(#7241),#7245);+#7241 = LINE('',#7242,#7243);+#7242 = CARTESIAN_POINT('',(0.,0.));+#7243 = VECTOR('',#7244,1.);+#7244 = DIRECTION('',(0.,-1.));+#7245 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7246 = ADVANCED_FACE('',(#7247),#6183,.T.);+#7247 = FACE_BOUND('',#7248,.T.);+#7248 = EDGE_LOOP('',(#7249,#7250,#7251,#7252));+#7249 = ORIENTED_EDGE('',*,*,#6163,.T.);+#7250 = ORIENTED_EDGE('',*,*,#7226,.T.);+#7251 = ORIENTED_EDGE('',*,*,#6654,.T.);+#7252 = ORIENTED_EDGE('',*,*,#7253,.F.);+#7253 = EDGE_CURVE('',#6128,#6655,#7254,.T.);+#7254 = SURFACE_CURVE('',#7255,(#7259,#7266),.PCURVE_S1.);+#7255 = LINE('',#7256,#7257);+#7256 = CARTESIAN_POINT('',(-0.774049931513,-2.954389051577E-03,+ 1.8000001));+#7257 = VECTOR('',#7258,1.);+#7258 = DIRECTION('',(-0.,-0.,-1.));+#7259 = PCURVE('',#6183,#7260);+#7260 = DEFINITIONAL_REPRESENTATION('',(#7261),#7265);+#7261 = LINE('',#7262,#7263);+#7262 = CARTESIAN_POINT('',(1.,0.));+#7263 = VECTOR('',#7264,1.);+#7264 = DIRECTION('',(0.,-1.));+#7265 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7266 = PCURVE('',#6147,#7267);+#7267 = DEFINITIONAL_REPRESENTATION('',(#7268),#7272);+#7268 = LINE('',#7269,#7270);+#7269 = CARTESIAN_POINT('',(0.,0.));+#7270 = VECTOR('',#7271,1.);+#7271 = DIRECTION('',(0.,-1.));+#7272 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7273 = ADVANCED_FACE('',(#7274),#6147,.T.);+#7274 = FACE_BOUND('',#7275,.T.);+#7275 = EDGE_LOOP('',(#7276,#7277,#7278,#7279));+#7276 = ORIENTED_EDGE('',*,*,#6127,.T.);+#7277 = ORIENTED_EDGE('',*,*,#7253,.T.);+#7278 = ORIENTED_EDGE('',*,*,#6677,.T.);+#7279 = ORIENTED_EDGE('',*,*,#7280,.F.);+#7280 = EDGE_CURVE('',#6083,#6678,#7281,.T.);+#7281 = SURFACE_CURVE('',#7282,(#7286,#7293),.PCURVE_S1.);+#7282 = LINE('',#7283,#7284);+#7283 = CARTESIAN_POINT('',(-0.755141841583,-5.928474030165E-02,+ 1.8000001));+#7284 = VECTOR('',#7285,1.);+#7285 = DIRECTION('',(-0.,-0.,-1.));+#7286 = PCURVE('',#6147,#7287);+#7287 = DEFINITIONAL_REPRESENTATION('',(#7288),#7292);+#7288 = LINE('',#7289,#7290);+#7289 = CARTESIAN_POINT('',(1.,0.));+#7290 = VECTOR('',#7291,1.);+#7291 = DIRECTION('',(0.,-1.));+#7292 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7293 = PCURVE('',#6108,#7294);+#7294 = DEFINITIONAL_REPRESENTATION('',(#7295),#7299);+#7295 = LINE('',#7296,#7297);+#7296 = CARTESIAN_POINT('',(0.,0.));+#7297 = VECTOR('',#7298,1.);+#7298 = DIRECTION('',(0.,-1.));+#7299 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7300 = ADVANCED_FACE('',(#7301),#6108,.T.);+#7301 = FACE_BOUND('',#7302,.T.);+#7302 = EDGE_LOOP('',(#7303,#7304,#7305,#7306));+#7303 = ORIENTED_EDGE('',*,*,#6082,.T.);+#7304 = ORIENTED_EDGE('',*,*,#7280,.T.);+#7305 = ORIENTED_EDGE('',*,*,#6700,.T.);+#7306 = ORIENTED_EDGE('',*,*,#7307,.F.);+#7307 = EDGE_CURVE('',#6047,#6701,#7308,.T.);+#7308 = SURFACE_CURVE('',#7309,(#7313,#7320),.PCURVE_S1.);+#7309 = LINE('',#7310,#7311);+#7310 = CARTESIAN_POINT('',(-0.781140465237,-0.123296503086,1.8000001));+#7311 = VECTOR('',#7312,1.);+#7312 = DIRECTION('',(-0.,-0.,-1.));+#7313 = PCURVE('',#6108,#7314);+#7314 = DEFINITIONAL_REPRESENTATION('',(#7315),#7319);+#7315 = LINE('',#7316,#7317);+#7316 = CARTESIAN_POINT('',(1.,0.));+#7317 = VECTOR('',#7318,1.);+#7318 = DIRECTION('',(0.,-1.));+#7319 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7320 = PCURVE('',#6066,#7321);+#7321 = DEFINITIONAL_REPRESENTATION('',(#7322),#7326);+#7322 = LINE('',#7323,#7324);+#7323 = CARTESIAN_POINT('',(0.,0.));+#7324 = VECTOR('',#7325,1.);+#7325 = DIRECTION('',(0.,-1.));+#7326 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7327 = ADVANCED_FACE('',(#7328),#6066,.T.);+#7328 = FACE_BOUND('',#7329,.T.);+#7329 = EDGE_LOOP('',(#7330,#7331,#7332,#7333));+#7330 = ORIENTED_EDGE('',*,*,#6046,.T.);+#7331 = ORIENTED_EDGE('',*,*,#7307,.T.);+#7332 = ORIENTED_EDGE('',*,*,#6723,.T.);+#7333 = ORIENTED_EDGE('',*,*,#7334,.F.);+#7334 = EDGE_CURVE('',#6011,#6724,#7335,.T.);+#7335 = SURFACE_CURVE('',#7336,(#7340,#7347),.PCURVE_S1.);+#7336 = LINE('',#7337,#7338);+#7337 = CARTESIAN_POINT('',(-0.856772824957,-0.145355941338,1.8000001));+#7338 = VECTOR('',#7339,1.);+#7339 = DIRECTION('',(-0.,-0.,-1.));+#7340 = PCURVE('',#6066,#7341);+#7341 = DEFINITIONAL_REPRESENTATION('',(#7342),#7346);+#7342 = LINE('',#7343,#7344);+#7343 = CARTESIAN_POINT('',(1.,0.));+#7344 = VECTOR('',#7345,1.);+#7345 = DIRECTION('',(0.,-1.));+#7346 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7347 = PCURVE('',#6030,#7348);+#7348 = DEFINITIONAL_REPRESENTATION('',(#7349),#7353);+#7349 = LINE('',#7350,#7351);+#7350 = CARTESIAN_POINT('',(0.,0.));+#7351 = VECTOR('',#7352,1.);+#7352 = DIRECTION('',(0.,-1.));+#7353 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7354 = ADVANCED_FACE('',(#7355),#6030,.T.);+#7355 = FACE_BOUND('',#7356,.T.);+#7356 = EDGE_LOOP('',(#7357,#7358,#7359,#7360));+#7357 = ORIENTED_EDGE('',*,*,#6010,.T.);+#7358 = ORIENTED_EDGE('',*,*,#7334,.T.);+#7359 = ORIENTED_EDGE('',*,*,#6746,.T.);+#7360 = ORIENTED_EDGE('',*,*,#7361,.F.);+#7361 = EDGE_CURVE('',#5975,#6747,#7362,.T.);+#7362 = SURFACE_CURVE('',#7363,(#7367,#7374),.PCURVE_S1.);+#7363 = LINE('',#7364,#7365);+#7364 = CARTESIAN_POINT('',(-0.89833123095,-0.14092435776,1.8000001));+#7365 = VECTOR('',#7366,1.);+#7366 = DIRECTION('',(-0.,-0.,-1.));+#7367 = PCURVE('',#6030,#7368);+#7368 = DEFINITIONAL_REPRESENTATION('',(#7369),#7373);+#7369 = LINE('',#7370,#7371);+#7370 = CARTESIAN_POINT('',(1.,0.));+#7371 = VECTOR('',#7372,1.);+#7372 = DIRECTION('',(0.,-1.));+#7373 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7374 = PCURVE('',#5994,#7375);+#7375 = DEFINITIONAL_REPRESENTATION('',(#7376),#7380);+#7376 = LINE('',#7377,#7378);+#7377 = CARTESIAN_POINT('',(0.,0.));+#7378 = VECTOR('',#7379,1.);+#7379 = DIRECTION('',(0.,-1.));+#7380 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7381 = ADVANCED_FACE('',(#7382),#5994,.T.);+#7382 = FACE_BOUND('',#7383,.T.);+#7383 = EDGE_LOOP('',(#7384,#7385,#7386,#7387));+#7384 = ORIENTED_EDGE('',*,*,#5974,.T.);+#7385 = ORIENTED_EDGE('',*,*,#7361,.T.);+#7386 = ORIENTED_EDGE('',*,*,#6769,.T.);+#7387 = ORIENTED_EDGE('',*,*,#7388,.F.);+#7388 = EDGE_CURVE('',#5948,#6770,#7389,.T.);+#7389 = SURFACE_CURVE('',#7390,(#7394,#7401),.PCURVE_S1.);+#7390 = LINE('',#7391,#7392);+#7391 = CARTESIAN_POINT('',(-0.940283555482,-0.127629607028,1.8000001));+#7392 = VECTOR('',#7393,1.);+#7393 = DIRECTION('',(-0.,-0.,-1.));+#7394 = PCURVE('',#5994,#7395);+#7395 = DEFINITIONAL_REPRESENTATION('',(#7396),#7400);+#7396 = LINE('',#7397,#7398);+#7397 = CARTESIAN_POINT('',(1.,0.));+#7398 = VECTOR('',#7399,1.);+#7399 = DIRECTION('',(0.,-1.));+#7400 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7401 = PCURVE('',#5963,#7402);+#7402 = DEFINITIONAL_REPRESENTATION('',(#7403),#7407);+#7403 = LINE('',#7404,#7405);+#7404 = CARTESIAN_POINT('',(0.,0.));+#7405 = VECTOR('',#7406,1.);+#7406 = DIRECTION('',(0.,-1.));+#7407 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7408 = ADVANCED_FACE('',(#7409),#5963,.T.);+#7409 = FACE_BOUND('',#7410,.T.);+#7410 = EDGE_LOOP('',(#7411,#7412,#7413,#7414));+#7411 = ORIENTED_EDGE('',*,*,#5947,.T.);+#7412 = ORIENTED_EDGE('',*,*,#7388,.T.);+#7413 = ORIENTED_EDGE('',*,*,#6792,.T.);+#7414 = ORIENTED_EDGE('',*,*,#7415,.F.);+#7415 = EDGE_CURVE('',#5912,#6793,#7416,.T.);+#7416 = SURFACE_CURVE('',#7417,(#7421,#7428),.PCURVE_S1.);+#7417 = LINE('',#7418,#7419);+#7418 = CARTESIAN_POINT('',(-0.940283555482,-8.528336395552E-02,+ 1.8000001));+#7419 = VECTOR('',#7420,1.);+#7420 = DIRECTION('',(-0.,-0.,-1.));+#7421 = PCURVE('',#5963,#7422);+#7422 = DEFINITIONAL_REPRESENTATION('',(#7423),#7427);+#7423 = LINE('',#7424,#7425);+#7424 = CARTESIAN_POINT('',(4.23462430726E-02,0.));+#7425 = VECTOR('',#7426,1.);+#7426 = DIRECTION('',(0.,-1.));+#7427 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7428 = PCURVE('',#5931,#7429);+#7429 = DEFINITIONAL_REPRESENTATION('',(#7430),#7434);+#7430 = LINE('',#7431,#7432);+#7431 = CARTESIAN_POINT('',(0.,0.));+#7432 = VECTOR('',#7433,1.);+#7433 = DIRECTION('',(0.,-1.));+#7434 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7435 = ADVANCED_FACE('',(#7436),#5931,.T.);+#7436 = FACE_BOUND('',#7437,.T.);+#7437 = EDGE_LOOP('',(#7438,#7439,#7440,#7441));+#7438 = ORIENTED_EDGE('',*,*,#5911,.T.);+#7439 = ORIENTED_EDGE('',*,*,#7415,.T.);+#7440 = ORIENTED_EDGE('',*,*,#6815,.T.);+#7441 = ORIENTED_EDGE('',*,*,#7442,.F.);+#7442 = EDGE_CURVE('',#5876,#6816,#7443,.T.);+#7443 = SURFACE_CURVE('',#7444,(#7448,#7455),.PCURVE_S1.);+#7444 = LINE('',#7445,#7446);+#7445 = CARTESIAN_POINT('',(-0.897444914234,-0.106358005857,1.8000001));+#7446 = VECTOR('',#7447,1.);+#7447 = DIRECTION('',(-0.,-0.,-1.));+#7448 = PCURVE('',#5931,#7449);+#7449 = DEFINITIONAL_REPRESENTATION('',(#7450),#7454);+#7450 = LINE('',#7451,#7452);+#7451 = CARTESIAN_POINT('',(1.,0.));+#7452 = VECTOR('',#7453,1.);+#7453 = DIRECTION('',(0.,-1.));+#7454 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7455 = PCURVE('',#5895,#7456);+#7456 = DEFINITIONAL_REPRESENTATION('',(#7457),#7461);+#7457 = LINE('',#7458,#7459);+#7458 = CARTESIAN_POINT('',(0.,0.));+#7459 = VECTOR('',#7460,1.);+#7460 = DIRECTION('',(0.,-1.));+#7461 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7462 = ADVANCED_FACE('',(#7463),#5895,.T.);+#7463 = FACE_BOUND('',#7464,.T.);+#7464 = EDGE_LOOP('',(#7465,#7466,#7467,#7468));+#7465 = ORIENTED_EDGE('',*,*,#5875,.T.);+#7466 = ORIENTED_EDGE('',*,*,#7442,.T.);+#7467 = ORIENTED_EDGE('',*,*,#6838,.T.);+#7468 = ORIENTED_EDGE('',*,*,#7469,.F.);+#7469 = EDGE_CURVE('',#5840,#6839,#7470,.T.);+#7470 = SURFACE_CURVE('',#7471,(#7475,#7482),.PCURVE_S1.);+#7471 = LINE('',#7472,#7473);+#7472 = CARTESIAN_POINT('',(-0.856772824957,-0.11305462104,1.8000001));+#7473 = VECTOR('',#7474,1.);+#7474 = DIRECTION('',(-0.,-0.,-1.));+#7475 = PCURVE('',#5895,#7476);+#7476 = DEFINITIONAL_REPRESENTATION('',(#7477),#7481);+#7477 = LINE('',#7478,#7479);+#7478 = CARTESIAN_POINT('',(1.,0.));+#7479 = VECTOR('',#7480,1.);+#7480 = DIRECTION('',(0.,-1.));+#7481 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7482 = PCURVE('',#5859,#7483);+#7483 = DEFINITIONAL_REPRESENTATION('',(#7484),#7488);+#7484 = LINE('',#7485,#7486);+#7485 = CARTESIAN_POINT('',(0.,0.));+#7486 = VECTOR('',#7487,1.);+#7487 = DIRECTION('',(0.,-1.));+#7488 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7489 = ADVANCED_FACE('',(#7490),#5859,.T.);+#7490 = FACE_BOUND('',#7491,.T.);+#7491 = EDGE_LOOP('',(#7492,#7493,#7494,#7495));+#7492 = ORIENTED_EDGE('',*,*,#5839,.T.);+#7493 = ORIENTED_EDGE('',*,*,#7469,.T.);+#7494 = ORIENTED_EDGE('',*,*,#6861,.T.);+#7495 = ORIENTED_EDGE('',*,*,#7496,.F.);+#7496 = EDGE_CURVE('',#5795,#6862,#7497,.T.);+#7497 = SURFACE_CURVE('',#7498,(#7502,#7509),.PCURVE_S1.);+#7498 = LINE('',#7499,#7500);+#7499 = CARTESIAN_POINT('',(-0.809896518672,-9.956291103814E-02,+ 1.8000001));+#7500 = VECTOR('',#7501,1.);+#7501 = DIRECTION('',(-0.,-0.,-1.));+#7502 = PCURVE('',#5859,#7503);+#7503 = DEFINITIONAL_REPRESENTATION('',(#7504),#7508);+#7504 = LINE('',#7505,#7506);+#7505 = CARTESIAN_POINT('',(1.,0.));+#7506 = VECTOR('',#7507,1.);+#7507 = DIRECTION('',(0.,-1.));+#7508 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7509 = PCURVE('',#5820,#7510);+#7510 = DEFINITIONAL_REPRESENTATION('',(#7511),#7515);+#7511 = LINE('',#7512,#7513);+#7512 = CARTESIAN_POINT('',(0.,0.));+#7513 = VECTOR('',#7514,1.);+#7514 = DIRECTION('',(0.,-1.));+#7515 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7516 = ADVANCED_FACE('',(#7517),#5820,.T.);+#7517 = FACE_BOUND('',#7518,.T.);+#7518 = EDGE_LOOP('',(#7519,#7520,#7521,#7522));+#7519 = ORIENTED_EDGE('',*,*,#5794,.T.);+#7520 = ORIENTED_EDGE('',*,*,#7496,.T.);+#7521 = ORIENTED_EDGE('',*,*,#6884,.T.);+#7522 = ORIENTED_EDGE('',*,*,#7523,.F.);+#7523 = EDGE_CURVE('',#5759,#6885,#7524,.T.);+#7524 = SURFACE_CURVE('',#7525,(#7529,#7536),.PCURVE_S1.);+#7525 = LINE('',#7526,#7527);+#7526 = CARTESIAN_POINT('',(-0.793154980713,-6.184521081301E-02,+ 1.8000001));+#7527 = VECTOR('',#7528,1.);+#7528 = DIRECTION('',(-0.,-0.,-1.));+#7529 = PCURVE('',#5820,#7530);+#7530 = DEFINITIONAL_REPRESENTATION('',(#7531),#7535);+#7531 = LINE('',#7532,#7533);+#7532 = CARTESIAN_POINT('',(1.,0.));+#7533 = VECTOR('',#7534,1.);+#7534 = DIRECTION('',(0.,-1.));+#7535 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7536 = PCURVE('',#5778,#7537);+#7537 = DEFINITIONAL_REPRESENTATION('',(#7538),#7542);+#7538 = LINE('',#7539,#7540);+#7539 = CARTESIAN_POINT('',(0.,0.));+#7540 = VECTOR('',#7541,1.);+#7541 = DIRECTION('',(0.,-1.));+#7542 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7543 = ADVANCED_FACE('',(#7544),#5778,.T.);+#7544 = FACE_BOUND('',#7545,.T.);+#7545 = EDGE_LOOP('',(#7546,#7547,#7548,#7549));+#7546 = ORIENTED_EDGE('',*,*,#5758,.T.);+#7547 = ORIENTED_EDGE('',*,*,#7523,.T.);+#7548 = ORIENTED_EDGE('',*,*,#6907,.T.);+#7549 = ORIENTED_EDGE('',*,*,#7550,.F.);+#7550 = EDGE_CURVE('',#5723,#6908,#7551,.T.);+#7551 = SURFACE_CURVE('',#7552,(#7556,#7563),.PCURVE_S1.);+#7552 = LINE('',#7553,#7554);+#7553 = CARTESIAN_POINT('',(-0.804677098015,-2.816517562503E-02,+ 1.8000001));+#7554 = VECTOR('',#7555,1.);+#7555 = DIRECTION('',(-0.,-0.,-1.));+#7556 = PCURVE('',#5778,#7557);+#7557 = DEFINITIONAL_REPRESENTATION('',(#7558),#7562);+#7558 = LINE('',#7559,#7560);+#7559 = CARTESIAN_POINT('',(1.,0.));+#7560 = VECTOR('',#7561,1.);+#7561 = DIRECTION('',(0.,-1.));+#7562 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7563 = PCURVE('',#5742,#7564);+#7564 = DEFINITIONAL_REPRESENTATION('',(#7565),#7569);+#7565 = LINE('',#7566,#7567);+#7566 = CARTESIAN_POINT('',(0.,0.));+#7567 = VECTOR('',#7568,1.);+#7568 = DIRECTION('',(0.,-1.));+#7569 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7570 = ADVANCED_FACE('',(#7571),#5742,.T.);+#7571 = FACE_BOUND('',#7572,.T.);+#7572 = EDGE_LOOP('',(#7573,#7574,#7575,#7576));+#7573 = ORIENTED_EDGE('',*,*,#5722,.T.);+#7574 = ORIENTED_EDGE('',*,*,#7550,.T.);+#7575 = ORIENTED_EDGE('',*,*,#6930,.T.);+#7576 = ORIENTED_EDGE('',*,*,#7577,.F.);+#7577 = EDGE_CURVE('',#5696,#6931,#7578,.T.);+#7578 = SURFACE_CURVE('',#7579,(#7583,#7590),.PCURVE_S1.);+#7579 = LINE('',#7580,#7581);+#7580 = CARTESIAN_POINT('',(-0.844758309481,-1.024188204547E-02,+ 1.8000001));+#7581 = VECTOR('',#7582,1.);+#7582 = DIRECTION('',(-0.,-0.,-1.));+#7583 = PCURVE('',#5742,#7584);+#7584 = DEFINITIONAL_REPRESENTATION('',(#7585),#7589);+#7585 = LINE('',#7586,#7587);+#7586 = CARTESIAN_POINT('',(1.,0.));+#7587 = VECTOR('',#7588,1.);+#7588 = DIRECTION('',(0.,-1.));+#7589 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7590 = PCURVE('',#5711,#7591);+#7591 = DEFINITIONAL_REPRESENTATION('',(#7592),#7596);+#7592 = LINE('',#7593,#7594);+#7593 = CARTESIAN_POINT('',(0.,0.));+#7594 = VECTOR('',#7595,1.);+#7595 = DIRECTION('',(0.,-1.));+#7596 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7597 = ADVANCED_FACE('',(#7598),#5711,.T.);+#7598 = FACE_BOUND('',#7599,.T.);+#7599 = EDGE_LOOP('',(#7600,#7601,#7602,#7603));+#7600 = ORIENTED_EDGE('',*,*,#5695,.T.);+#7601 = ORIENTED_EDGE('',*,*,#7577,.T.);+#7602 = ORIENTED_EDGE('',*,*,#6953,.T.);+#7603 = ORIENTED_EDGE('',*,*,#7604,.F.);+#7604 = EDGE_CURVE('',#5660,#6954,#7605,.T.);+#7605 = SURFACE_CURVE('',#7606,(#7610,#7617),.PCURVE_S1.);+#7606 = LINE('',#7607,#7608);+#7607 = CARTESIAN_POINT('',(-0.866029910652,-5.317900292839E-03,+ 1.8000001));+#7608 = VECTOR('',#7609,1.);+#7609 = DIRECTION('',(-0.,-0.,-1.));+#7610 = PCURVE('',#5711,#7611);+#7611 = DEFINITIONAL_REPRESENTATION('',(#7612),#7616);+#7612 = LINE('',#7613,#7614);+#7613 = CARTESIAN_POINT('',(2.183406999836E-02,0.));+#7614 = VECTOR('',#7615,1.);+#7615 = DIRECTION('',(0.,-1.));+#7616 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7617 = PCURVE('',#5679,#7618);+#7618 = DEFINITIONAL_REPRESENTATION('',(#7619),#7623);+#7619 = LINE('',#7620,#7621);+#7620 = CARTESIAN_POINT('',(0.,0.));+#7621 = VECTOR('',#7622,1.);+#7622 = DIRECTION('',(0.,-1.));+#7623 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7624 = ADVANCED_FACE('',(#7625),#5679,.T.);+#7625 = FACE_BOUND('',#7626,.T.);+#7626 = EDGE_LOOP('',(#7627,#7628,#7629,#7630));+#7627 = ORIENTED_EDGE('',*,*,#5659,.T.);+#7628 = ORIENTED_EDGE('',*,*,#7604,.T.);+#7629 = ORIENTED_EDGE('',*,*,#6976,.T.);+#7630 = ORIENTED_EDGE('',*,*,#7631,.F.);+#7631 = EDGE_CURVE('',#5624,#6977,#7632,.T.);+#7632 = SURFACE_CURVE('',#7633,(#7637,#7644),.PCURVE_S1.);+#7633 = LINE('',#7634,#7635);+#7634 = CARTESIAN_POINT('',(-0.925511610224,2.265031606209E-02,1.8000001+ ));+#7635 = VECTOR('',#7636,1.);+#7636 = DIRECTION('',(-0.,-0.,-1.));+#7637 = PCURVE('',#5679,#7638);+#7638 = DEFINITIONAL_REPRESENTATION('',(#7639),#7643);+#7639 = LINE('',#7640,#7641);+#7640 = CARTESIAN_POINT('',(1.,0.));+#7641 = VECTOR('',#7642,1.);+#7642 = DIRECTION('',(0.,-1.));+#7643 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7644 = PCURVE('',#5643,#7645);+#7645 = DEFINITIONAL_REPRESENTATION('',(#7646),#7650);+#7646 = LINE('',#7647,#7648);+#7647 = CARTESIAN_POINT('',(0.,0.));+#7648 = VECTOR('',#7649,1.);+#7649 = DIRECTION('',(0.,-1.));+#7650 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7651 = ADVANCED_FACE('',(#7652),#5643,.T.);+#7652 = FACE_BOUND('',#7653,.T.);+#7653 = EDGE_LOOP('',(#7654,#7655,#7656,#7657));+#7654 = ORIENTED_EDGE('',*,*,#5623,.T.);+#7655 = ORIENTED_EDGE('',*,*,#7631,.T.);+#7656 = ORIENTED_EDGE('',*,*,#6999,.T.);+#7657 = ORIENTED_EDGE('',*,*,#7658,.F.);+#7658 = EDGE_CURVE('',#5579,#7000,#7659,.T.);+#7659 = SURFACE_CURVE('',#7660,(#7664,#7671),.PCURVE_S1.);+#7660 = LINE('',#7661,#7662);+#7661 = CARTESIAN_POINT('',(-0.944025781614,7.28749299389E-02,1.8000001)+ );+#7662 = VECTOR('',#7663,1.);+#7663 = DIRECTION('',(-0.,-0.,-1.));+#7664 = PCURVE('',#5643,#7665);+#7665 = DEFINITIONAL_REPRESENTATION('',(#7666),#7670);+#7666 = LINE('',#7667,#7668);+#7667 = CARTESIAN_POINT('',(1.,0.));+#7668 = VECTOR('',#7669,1.);+#7669 = DIRECTION('',(0.,-1.));+#7670 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7671 = PCURVE('',#5604,#7672);+#7672 = DEFINITIONAL_REPRESENTATION('',(#7673),#7677);+#7673 = LINE('',#7674,#7675);+#7674 = CARTESIAN_POINT('',(0.,0.));+#7675 = VECTOR('',#7676,1.);+#7676 = DIRECTION('',(0.,-1.));+#7677 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7678 = ADVANCED_FACE('',(#7679),#5604,.T.);+#7679 = FACE_BOUND('',#7680,.T.);+#7680 = EDGE_LOOP('',(#7681,#7682,#7683,#7684));+#7681 = ORIENTED_EDGE('',*,*,#5578,.T.);+#7682 = ORIENTED_EDGE('',*,*,#7658,.T.);+#7683 = ORIENTED_EDGE('',*,*,#7022,.T.);+#7684 = ORIENTED_EDGE('',*,*,#7685,.F.);+#7685 = EDGE_CURVE('',#5543,#7023,#7686,.T.);+#7686 = SURFACE_CURVE('',#7687,(#7691,#7698),.PCURVE_S1.);+#7687 = LINE('',#7688,#7689);+#7688 = CARTESIAN_POINT('',(-0.917534759785,0.136000376008,1.8000001));+#7689 = VECTOR('',#7690,1.);+#7690 = DIRECTION('',(-0.,-0.,-1.));+#7691 = PCURVE('',#5604,#7692);+#7692 = DEFINITIONAL_REPRESENTATION('',(#7693),#7697);+#7693 = LINE('',#7694,#7695);+#7694 = CARTESIAN_POINT('',(1.,0.));+#7695 = VECTOR('',#7696,1.);+#7696 = DIRECTION('',(0.,-1.));+#7697 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7698 = PCURVE('',#5562,#7699);+#7699 = DEFINITIONAL_REPRESENTATION('',(#7700),#7704);+#7700 = LINE('',#7701,#7702);+#7701 = CARTESIAN_POINT('',(0.,0.));+#7702 = VECTOR('',#7703,1.);+#7703 = DIRECTION('',(0.,-1.));+#7704 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7705 = ADVANCED_FACE('',(#7706),#5562,.T.);+#7706 = FACE_BOUND('',#7707,.T.);+#7707 = EDGE_LOOP('',(#7708,#7709,#7710,#7711));+#7708 = ORIENTED_EDGE('',*,*,#5542,.T.);+#7709 = ORIENTED_EDGE('',*,*,#7685,.T.);+#7710 = ORIENTED_EDGE('',*,*,#7045,.T.);+#7711 = ORIENTED_EDGE('',*,*,#7712,.F.);+#7712 = EDGE_CURVE('',#5507,#7046,#7713,.T.);+#7713 = SURFACE_CURVE('',#7714,(#7718,#7725),.PCURVE_S1.);+#7714 = LINE('',#7715,#7716);+#7715 = CARTESIAN_POINT('',(-0.847121820722,0.159733968055,1.8000001));+#7716 = VECTOR('',#7717,1.);+#7717 = DIRECTION('',(-0.,-0.,-1.));+#7718 = PCURVE('',#5562,#7719);+#7719 = DEFINITIONAL_REPRESENTATION('',(#7720),#7724);+#7720 = LINE('',#7721,#7722);+#7721 = CARTESIAN_POINT('',(1.,0.));+#7722 = VECTOR('',#7723,1.);+#7723 = DIRECTION('',(0.,-1.));+#7724 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7725 = PCURVE('',#5526,#7726);+#7726 = DEFINITIONAL_REPRESENTATION('',(#7727),#7731);+#7727 = LINE('',#7728,#7729);+#7728 = CARTESIAN_POINT('',(0.,0.));+#7729 = VECTOR('',#7730,1.);+#7730 = DIRECTION('',(0.,-1.));+#7731 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7732 = ADVANCED_FACE('',(#7733),#5526,.T.);+#7733 = FACE_BOUND('',#7734,.T.);+#7734 = EDGE_LOOP('',(#7735,#7736,#7737,#7738));+#7735 = ORIENTED_EDGE('',*,*,#5506,.T.);+#7736 = ORIENTED_EDGE('',*,*,#7712,.T.);+#7737 = ORIENTED_EDGE('',*,*,#7068,.T.);+#7738 = ORIENTED_EDGE('',*,*,#7739,.F.);+#7739 = EDGE_CURVE('',#5471,#7069,#7740,.T.);+#7740 = SURFACE_CURVE('',#7741,(#7745,#7752),.PCURVE_S1.);+#7741 = LINE('',#7742,#7743);+#7742 = CARTESIAN_POINT('',(-0.811472192833,0.155893262288,1.8000001));+#7743 = VECTOR('',#7744,1.);+#7744 = DIRECTION('',(-0.,-0.,-1.));+#7745 = PCURVE('',#5526,#7746);+#7746 = DEFINITIONAL_REPRESENTATION('',(#7747),#7751);+#7747 = LINE('',#7748,#7749);+#7748 = CARTESIAN_POINT('',(1.,0.));+#7749 = VECTOR('',#7750,1.);+#7750 = DIRECTION('',(0.,-1.));+#7751 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7752 = PCURVE('',#5490,#7753);+#7753 = DEFINITIONAL_REPRESENTATION('',(#7754),#7758);+#7754 = LINE('',#7755,#7756);+#7755 = CARTESIAN_POINT('',(0.,0.));+#7756 = VECTOR('',#7757,1.);+#7757 = DIRECTION('',(0.,-1.));+#7758 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7759 = ADVANCED_FACE('',(#7760),#5490,.T.);+#7760 = FACE_BOUND('',#7761,.T.);+#7761 = EDGE_LOOP('',(#7762,#7763,#7764,#7765));+#7762 = ORIENTED_EDGE('',*,*,#5470,.T.);+#7763 = ORIENTED_EDGE('',*,*,#7739,.T.);+#7764 = ORIENTED_EDGE('',*,*,#7091,.T.);+#7765 = ORIENTED_EDGE('',*,*,#7766,.F.);+#7766 = EDGE_CURVE('',#5444,#6493,#7767,.T.);+#7767 = SURFACE_CURVE('',#7768,(#7772,#7779),.PCURVE_S1.);+#7768 = LINE('',#7769,#7770);+#7769 = CARTESIAN_POINT('',(-0.772080338812,0.144371144987,1.8000001));+#7770 = VECTOR('',#7771,1.);+#7771 = DIRECTION('',(-0.,-0.,-1.));+#7772 = PCURVE('',#5490,#7773);+#7773 = DEFINITIONAL_REPRESENTATION('',(#7774),#7778);+#7774 = LINE('',#7775,#7776);+#7775 = CARTESIAN_POINT('',(1.,0.));+#7776 = VECTOR('',#7777,1.);+#7777 = DIRECTION('',(0.,-1.));+#7778 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7779 = PCURVE('',#5459,#7780);+#7780 = DEFINITIONAL_REPRESENTATION('',(#7781),#7785);+#7781 = LINE('',#7782,#7783);+#7782 = CARTESIAN_POINT('',(0.,0.));+#7783 = VECTOR('',#7784,1.);+#7784 = DIRECTION('',(0.,-1.));+#7785 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7786 = ADVANCED_FACE('',(#7787),#5459,.T.);+#7787 = FACE_BOUND('',#7788,.T.);+#7788 = EDGE_LOOP('',(#7789,#7790,#7791,#7792));+#7789 = ORIENTED_EDGE('',*,*,#5443,.T.);+#7790 = ORIENTED_EDGE('',*,*,#7766,.T.);+#7791 = ORIENTED_EDGE('',*,*,#6492,.T.);+#7792 = ORIENTED_EDGE('',*,*,#7793,.F.);+#7793 = EDGE_CURVE('',#5408,#6495,#7794,.T.);+#7794 = SURFACE_CURVE('',#7795,(#7799,#7806),.PCURVE_S1.);+#7795 = LINE('',#7796,#7797);+#7796 = CARTESIAN_POINT('',(-0.772080338812,0.103994494616,1.8000001));+#7797 = VECTOR('',#7798,1.);+#7798 = DIRECTION('',(-0.,-0.,-1.));+#7799 = PCURVE('',#5459,#7800);+#7800 = DEFINITIONAL_REPRESENTATION('',(#7801),#7805);+#7801 = LINE('',#7802,#7803);+#7802 = CARTESIAN_POINT('',(4.037665037155E-02,0.));+#7803 = VECTOR('',#7804,1.);+#7804 = DIRECTION('',(0.,-1.));+#7805 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7806 = PCURVE('',#5427,#7807);+#7807 = DEFINITIONAL_REPRESENTATION('',(#7808),#7812);+#7808 = LINE('',#7809,#7810);+#7809 = CARTESIAN_POINT('',(0.,0.));+#7810 = VECTOR('',#7811,1.);+#7811 = DIRECTION('',(0.,-1.));+#7812 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7813 = ADVANCED_FACE('',(#7814),#5427,.T.);+#7814 = FACE_BOUND('',#7815,.T.);+#7815 = EDGE_LOOP('',(#7816,#7817,#7818,#7819));+#7816 = ORIENTED_EDGE('',*,*,#5405,.T.);+#7817 = ORIENTED_EDGE('',*,*,#7793,.T.);+#7818 = ORIENTED_EDGE('',*,*,#6517,.T.);+#7819 = ORIENTED_EDGE('',*,*,#6417,.F.);+#7820 = ADVANCED_FACE('',(#7821),#5392,.T.);+#7821 = FACE_BOUND('',#7822,.T.);+#7822 = EDGE_LOOP('',(#7823,#7824,#7847,#7875));+#7823 = ORIENTED_EDGE('',*,*,#5378,.T.);+#7824 = ORIENTED_EDGE('',*,*,#7825,.T.);+#7825 = EDGE_CURVE('',#5134,#7826,#7828,.T.);+#7826 = VERTEX_POINT('',#7827);+#7827 = CARTESIAN_POINT('',(-0.650753428427,0.154416067762,1.7000001));+#7828 = SURFACE_CURVE('',#7829,(#7833,#7840),.PCURVE_S1.);+#7829 = LINE('',#7830,#7831);+#7830 = CARTESIAN_POINT('',(-0.650753428427,0.154416067762,1.8000001));+#7831 = VECTOR('',#7832,1.);+#7832 = DIRECTION('',(-0.,-0.,-1.));+#7833 = PCURVE('',#5392,#7834);+#7834 = DEFINITIONAL_REPRESENTATION('',(#7835),#7839);+#7835 = LINE('',#7836,#7837);+#7836 = CARTESIAN_POINT('',(0.,0.));+#7837 = VECTOR('',#7838,1.);+#7838 = DIRECTION('',(0.,-1.));+#7839 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7840 = PCURVE('',#5151,#7841);+#7841 = DEFINITIONAL_REPRESENTATION('',(#7842),#7846);+#7842 = LINE('',#7843,#7844);+#7843 = CARTESIAN_POINT('',(5.042157314691E-02,0.));+#7844 = VECTOR('',#7845,1.);+#7845 = DIRECTION('',(0.,-1.));+#7846 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7847 = ORIENTED_EDGE('',*,*,#7848,.T.);+#7848 = EDGE_CURVE('',#7826,#7849,#7851,.T.);+#7849 = VERTEX_POINT('',#7850);+#7850 = CARTESIAN_POINT('',(-0.551485956294,-8.764687519678E-02,+ 1.7000001));+#7851 = SURFACE_CURVE('',#7852,(#7856,#7863),.PCURVE_S1.);+#7852 = LINE('',#7853,#7854);+#7853 = CARTESIAN_POINT('',(-0.650753428427,0.154416067762,1.7000001));+#7854 = VECTOR('',#7855,1.);+#7855 = DIRECTION('',(0.379424173637,-0.92522283611,0.));+#7856 = PCURVE('',#5392,#7857);+#7857 = DEFINITIONAL_REPRESENTATION('',(#7858),#7862);+#7858 = LINE('',#7859,#7860);+#7859 = CARTESIAN_POINT('',(0.,-0.1));+#7860 = VECTOR('',#7861,1.);+#7861 = DIRECTION('',(1.,0.));+#7862 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7863 = PCURVE('',#7864,#7869);+#7864 = PLANE('',#7865);+#7865 = AXIS2_PLACEMENT_3D('',#7866,#7867,#7868);+#7866 = CARTESIAN_POINT('',(-0.728552340119,-0.139644122505,1.7000001));+#7867 = DIRECTION('',(0.,0.,1.));+#7868 = DIRECTION('',(1.,0.,0.));+#7869 = DEFINITIONAL_REPRESENTATION('',(#7870),#7874);+#7870 = LINE('',#7871,#7872);+#7871 = CARTESIAN_POINT('',(7.779891169153E-02,0.294060190267));+#7872 = VECTOR('',#7873,1.);+#7873 = DIRECTION('',(0.379424173637,-0.92522283611));+#7874 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7875 = ORIENTED_EDGE('',*,*,#7876,.F.);+#7876 = EDGE_CURVE('',#5352,#7849,#7877,.T.);+#7877 = SURFACE_CURVE('',#7878,(#7882,#7889),.PCURVE_S1.);+#7878 = LINE('',#7879,#7880);+#7879 = CARTESIAN_POINT('',(-0.551485956294,-8.764687519678E-02,+ 1.8000001));+#7880 = VECTOR('',#7881,1.);+#7881 = DIRECTION('',(-0.,-0.,-1.));+#7882 = PCURVE('',#5392,#7883);+#7883 = DEFINITIONAL_REPRESENTATION('',(#7884),#7888);+#7884 = LINE('',#7885,#7886);+#7885 = CARTESIAN_POINT('',(0.261626641185,0.));+#7886 = VECTOR('',#7887,1.);+#7887 = DIRECTION('',(0.,-1.));+#7888 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7889 = PCURVE('',#5367,#7890);+#7890 = DEFINITIONAL_REPRESENTATION('',(#7891),#7895);+#7891 = LINE('',#7892,#7893);+#7892 = CARTESIAN_POINT('',(0.,0.));+#7893 = VECTOR('',#7894,1.);+#7894 = DIRECTION('',(0.,-1.));+#7895 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7896 = ADVANCED_FACE('',(#7897),#7864,.T.);+#7897 = FACE_BOUND('',#7898,.F.);+#7898 = EDGE_LOOP('',(#7899,#7924,#7945,#7946,#7969,#7992,#8015,#8038,+ #8061,#8084));+#7899 = ORIENTED_EDGE('',*,*,#7900,.T.);+#7900 = EDGE_CURVE('',#7901,#7903,#7905,.T.);+#7901 = VERTEX_POINT('',#7902);+#7902 = CARTESIAN_POINT('',(-0.701175001574,-0.139644122505,1.7000001));+#7903 = VERTEX_POINT('',#7904);+#7904 = CARTESIAN_POINT('',(-0.701175001574,0.154416067762,1.7000001));+#7905 = SURFACE_CURVE('',#7906,(#7910,#7917),.PCURVE_S1.);+#7906 = LINE('',#7907,#7908);+#7907 = CARTESIAN_POINT('',(-0.701175001574,-0.139644122505,1.7000001));+#7908 = VECTOR('',#7909,1.);+#7909 = DIRECTION('',(0.,1.,0.));+#7910 = PCURVE('',#7864,#7911);+#7911 = DEFINITIONAL_REPRESENTATION('',(#7912),#7916);+#7912 = LINE('',#7913,#7914);+#7913 = CARTESIAN_POINT('',(2.737733854461E-02,0.));+#7914 = VECTOR('',#7915,1.);+#7915 = DIRECTION('',(0.,1.));+#7916 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7917 = PCURVE('',#5178,#7918);+#7918 = DEFINITIONAL_REPRESENTATION('',(#7919),#7923);+#7919 = LINE('',#7920,#7921);+#7920 = CARTESIAN_POINT('',(0.,-0.1));+#7921 = VECTOR('',#7922,1.);+#7922 = DIRECTION('',(1.,0.));+#7923 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7924 = ORIENTED_EDGE('',*,*,#7925,.T.);+#7925 = EDGE_CURVE('',#7903,#7826,#7926,.T.);+#7926 = SURFACE_CURVE('',#7927,(#7931,#7938),.PCURVE_S1.);+#7927 = LINE('',#7928,#7929);+#7928 = CARTESIAN_POINT('',(-0.701175001574,0.154416067762,1.7000001));+#7929 = VECTOR('',#7930,1.);+#7930 = DIRECTION('',(1.,0.,0.));+#7931 = PCURVE('',#7864,#7932);+#7932 = DEFINITIONAL_REPRESENTATION('',(#7933),#7937);+#7933 = LINE('',#7934,#7935);+#7934 = CARTESIAN_POINT('',(2.737733854461E-02,0.294060190267));+#7935 = VECTOR('',#7936,1.);+#7936 = DIRECTION('',(1.,0.));+#7937 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7938 = PCURVE('',#5151,#7939);+#7939 = DEFINITIONAL_REPRESENTATION('',(#7940),#7944);+#7940 = LINE('',#7941,#7942);+#7941 = CARTESIAN_POINT('',(0.,-0.1));+#7942 = VECTOR('',#7943,1.);+#7943 = DIRECTION('',(1.,0.));+#7944 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7945 = ORIENTED_EDGE('',*,*,#7848,.T.);+#7946 = ORIENTED_EDGE('',*,*,#7947,.T.);+#7947 = EDGE_CURVE('',#7849,#7948,#7950,.T.);+#7948 = VERTEX_POINT('',#7949);+#7949 = CARTESIAN_POINT('',(-0.551485956294,0.154416067762,1.7000001));+#7950 = SURFACE_CURVE('',#7951,(#7955,#7962),.PCURVE_S1.);+#7951 = LINE('',#7952,#7953);+#7952 = CARTESIAN_POINT('',(-0.551485956294,-8.764687519678E-02,+ 1.7000001));+#7953 = VECTOR('',#7954,1.);+#7954 = DIRECTION('',(0.,1.,0.));+#7955 = PCURVE('',#7864,#7956);+#7956 = DEFINITIONAL_REPRESENTATION('',(#7957),#7961);+#7957 = LINE('',#7958,#7959);+#7958 = CARTESIAN_POINT('',(0.177066383825,5.199724730776E-02));+#7959 = VECTOR('',#7960,1.);+#7960 = DIRECTION('',(0.,1.));+#7961 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7962 = PCURVE('',#5367,#7963);+#7963 = DEFINITIONAL_REPRESENTATION('',(#7964),#7968);+#7964 = LINE('',#7965,#7966);+#7965 = CARTESIAN_POINT('',(0.,-0.1));+#7966 = VECTOR('',#7967,1.);+#7967 = DIRECTION('',(1.,0.));+#7968 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7969 = ORIENTED_EDGE('',*,*,#7970,.T.);+#7970 = EDGE_CURVE('',#7948,#7971,#7973,.T.);+#7971 = VERTEX_POINT('',#7972);+#7972 = CARTESIAN_POINT('',(-0.513078898624,0.154416067762,1.7000001));+#7973 = SURFACE_CURVE('',#7974,(#7978,#7985),.PCURVE_S1.);+#7974 = LINE('',#7975,#7976);+#7975 = CARTESIAN_POINT('',(-0.551485956294,0.154416067762,1.7000001));+#7976 = VECTOR('',#7977,1.);+#7977 = DIRECTION('',(1.,0.,0.));+#7978 = PCURVE('',#7864,#7979);+#7979 = DEFINITIONAL_REPRESENTATION('',(#7980),#7984);+#7980 = LINE('',#7981,#7982);+#7981 = CARTESIAN_POINT('',(0.177066383825,0.294060190267));+#7982 = VECTOR('',#7983,1.);+#7983 = DIRECTION('',(1.,0.));+#7984 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7985 = PCURVE('',#5340,#7986);+#7986 = DEFINITIONAL_REPRESENTATION('',(#7987),#7991);+#7987 = LINE('',#7988,#7989);+#7988 = CARTESIAN_POINT('',(0.,-0.1));+#7989 = VECTOR('',#7990,1.);+#7990 = DIRECTION('',(1.,0.));+#7991 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7992 = ORIENTED_EDGE('',*,*,#7993,.T.);+#7993 = EDGE_CURVE('',#7971,#7994,#7996,.T.);+#7994 = VERTEX_POINT('',#7995);+#7995 = CARTESIAN_POINT('',(-0.513078898624,-0.139644122505,1.7000001));+#7996 = SURFACE_CURVE('',#7997,(#8001,#8008),.PCURVE_S1.);+#7997 = LINE('',#7998,#7999);+#7998 = CARTESIAN_POINT('',(-0.513078898624,0.154416067762,1.7000001));+#7999 = VECTOR('',#8000,1.);+#8000 = DIRECTION('',(0.,-1.,0.));+#8001 = PCURVE('',#7864,#8002);+#8002 = DEFINITIONAL_REPRESENTATION('',(#8003),#8007);+#8003 = LINE('',#8004,#8005);+#8004 = CARTESIAN_POINT('',(0.215473441495,0.294060190267));+#8005 = VECTOR('',#8006,1.);+#8006 = DIRECTION('',(0.,-1.));+#8007 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8008 = PCURVE('',#5313,#8009);+#8009 = DEFINITIONAL_REPRESENTATION('',(#8010),#8014);+#8010 = LINE('',#8011,#8012);+#8011 = CARTESIAN_POINT('',(0.,-0.1));+#8012 = VECTOR('',#8013,1.);+#8013 = DIRECTION('',(1.,0.));+#8014 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8015 = ORIENTED_EDGE('',*,*,#8016,.T.);+#8016 = EDGE_CURVE('',#7994,#8017,#8019,.T.);+#8017 = VERTEX_POINT('',#8018);+#8018 = CARTESIAN_POINT('',(-0.563500471771,-0.139644122505,1.7000001));+#8019 = SURFACE_CURVE('',#8020,(#8024,#8031),.PCURVE_S1.);+#8020 = LINE('',#8021,#8022);+#8021 = CARTESIAN_POINT('',(-0.513078898624,-0.139644122505,1.7000001));+#8022 = VECTOR('',#8023,1.);+#8023 = DIRECTION('',(-1.,0.,0.));+#8024 = PCURVE('',#7864,#8025);+#8025 = DEFINITIONAL_REPRESENTATION('',(#8026),#8030);+#8026 = LINE('',#8027,#8028);+#8027 = CARTESIAN_POINT('',(0.215473441495,0.));+#8028 = VECTOR('',#8029,1.);+#8029 = DIRECTION('',(-1.,0.));+#8030 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8031 = PCURVE('',#5286,#8032);+#8032 = DEFINITIONAL_REPRESENTATION('',(#8033),#8037);+#8033 = LINE('',#8034,#8035);+#8034 = CARTESIAN_POINT('',(0.,-0.1));+#8035 = VECTOR('',#8036,1.);+#8036 = DIRECTION('',(1.,0.));+#8037 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8038 = ORIENTED_EDGE('',*,*,#8039,.T.);+#8039 = EDGE_CURVE('',#8017,#8040,#8042,.T.);+#8040 = VERTEX_POINT('',#8041);+#8041 = CARTESIAN_POINT('',(-0.662767943904,0.102418820455,1.7000001));+#8042 = SURFACE_CURVE('',#8043,(#8047,#8054),.PCURVE_S1.);+#8043 = LINE('',#8044,#8045);+#8044 = CARTESIAN_POINT('',(-0.563500471771,-0.139644122505,1.7000001));+#8045 = VECTOR('',#8046,1.);+#8046 = DIRECTION('',(-0.379424173637,0.92522283611,0.));+#8047 = PCURVE('',#7864,#8048);+#8048 = DEFINITIONAL_REPRESENTATION('',(#8049),#8053);+#8049 = LINE('',#8050,#8051);+#8050 = CARTESIAN_POINT('',(0.165051868348,0.));+#8051 = VECTOR('',#8052,1.);+#8052 = DIRECTION('',(-0.379424173637,0.92522283611));+#8053 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8054 = PCURVE('',#5259,#8055);+#8055 = DEFINITIONAL_REPRESENTATION('',(#8056),#8060);+#8056 = LINE('',#8057,#8058);+#8057 = CARTESIAN_POINT('',(0.,-0.1));+#8058 = VECTOR('',#8059,1.);+#8059 = DIRECTION('',(1.,0.));+#8060 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8061 = ORIENTED_EDGE('',*,*,#8062,.T.);+#8062 = EDGE_CURVE('',#8040,#8063,#8065,.T.);+#8063 = VERTEX_POINT('',#8064);+#8064 = CARTESIAN_POINT('',(-0.662767943904,-0.139644122505,1.7000001));+#8065 = SURFACE_CURVE('',#8066,(#8070,#8077),.PCURVE_S1.);+#8066 = LINE('',#8067,#8068);+#8067 = CARTESIAN_POINT('',(-0.662767943904,0.102418820455,1.7000001));+#8068 = VECTOR('',#8069,1.);+#8069 = DIRECTION('',(0.,-1.,0.));+#8070 = PCURVE('',#7864,#8071);+#8071 = DEFINITIONAL_REPRESENTATION('',(#8072),#8076);+#8072 = LINE('',#8073,#8074);+#8073 = CARTESIAN_POINT('',(6.578439621511E-02,0.242062942959));+#8074 = VECTOR('',#8075,1.);+#8075 = DIRECTION('',(0.,-1.));+#8076 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8077 = PCURVE('',#5232,#8078);+#8078 = DEFINITIONAL_REPRESENTATION('',(#8079),#8083);+#8079 = LINE('',#8080,#8081);+#8080 = CARTESIAN_POINT('',(0.,-0.1));+#8081 = VECTOR('',#8082,1.);+#8082 = DIRECTION('',(1.,0.));+#8083 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8084 = ORIENTED_EDGE('',*,*,#8085,.T.);+#8085 = EDGE_CURVE('',#8063,#7901,#8086,.T.);+#8086 = SURFACE_CURVE('',#8087,(#8091,#8098),.PCURVE_S1.);+#8087 = LINE('',#8088,#8089);+#8088 = CARTESIAN_POINT('',(-0.662767943904,-0.139644122505,1.7000001));+#8089 = VECTOR('',#8090,1.);+#8090 = DIRECTION('',(-1.,0.,0.));+#8091 = PCURVE('',#7864,#8092);+#8092 = DEFINITIONAL_REPRESENTATION('',(#8093),#8097);+#8093 = LINE('',#8094,#8095);+#8094 = CARTESIAN_POINT('',(6.578439621511E-02,0.));+#8095 = VECTOR('',#8096,1.);+#8096 = DIRECTION('',(-1.,0.));+#8097 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8098 = PCURVE('',#5205,#8099);+#8099 = DEFINITIONAL_REPRESENTATION('',(#8100),#8104);+#8100 = LINE('',#8101,#8102);+#8101 = CARTESIAN_POINT('',(0.,-0.1));+#8102 = VECTOR('',#8103,1.);+#8103 = DIRECTION('',(1.,0.));+#8104 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8105 = ADVANCED_FACE('',(#8106),#5367,.T.);+#8106 = FACE_BOUND('',#8107,.T.);+#8107 = EDGE_LOOP('',(#8108,#8109,#8110,#8111));+#8108 = ORIENTED_EDGE('',*,*,#5351,.T.);+#8109 = ORIENTED_EDGE('',*,*,#7876,.T.);+#8110 = ORIENTED_EDGE('',*,*,#7947,.T.);+#8111 = ORIENTED_EDGE('',*,*,#8112,.F.);+#8112 = EDGE_CURVE('',#5325,#7948,#8113,.T.);+#8113 = SURFACE_CURVE('',#8114,(#8118,#8125),.PCURVE_S1.);+#8114 = LINE('',#8115,#8116);+#8115 = CARTESIAN_POINT('',(-0.551485956294,0.154416067762,1.8000001));+#8116 = VECTOR('',#8117,1.);+#8117 = DIRECTION('',(-0.,-0.,-1.));+#8118 = PCURVE('',#5367,#8119);+#8119 = DEFINITIONAL_REPRESENTATION('',(#8120),#8124);+#8120 = LINE('',#8121,#8122);+#8121 = CARTESIAN_POINT('',(0.242062942959,0.));+#8122 = VECTOR('',#8123,1.);+#8123 = DIRECTION('',(0.,-1.));+#8124 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8125 = PCURVE('',#5340,#8126);+#8126 = DEFINITIONAL_REPRESENTATION('',(#8127),#8131);+#8127 = LINE('',#8128,#8129);+#8128 = CARTESIAN_POINT('',(0.,0.));+#8129 = VECTOR('',#8130,1.);+#8130 = DIRECTION('',(0.,-1.));+#8131 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8132 = ADVANCED_FACE('',(#8133),#5340,.T.);+#8133 = FACE_BOUND('',#8134,.T.);+#8134 = EDGE_LOOP('',(#8135,#8136,#8137,#8138));+#8135 = ORIENTED_EDGE('',*,*,#5324,.T.);+#8136 = ORIENTED_EDGE('',*,*,#8112,.T.);+#8137 = ORIENTED_EDGE('',*,*,#7970,.T.);+#8138 = ORIENTED_EDGE('',*,*,#8139,.F.);+#8139 = EDGE_CURVE('',#5298,#7971,#8140,.T.);+#8140 = SURFACE_CURVE('',#8141,(#8145,#8152),.PCURVE_S1.);+#8141 = LINE('',#8142,#8143);+#8142 = CARTESIAN_POINT('',(-0.513078898624,0.154416067762,1.8000001));+#8143 = VECTOR('',#8144,1.);+#8144 = DIRECTION('',(-0.,-0.,-1.));+#8145 = PCURVE('',#5340,#8146);+#8146 = DEFINITIONAL_REPRESENTATION('',(#8147),#8151);+#8147 = LINE('',#8148,#8149);+#8148 = CARTESIAN_POINT('',(3.84070576705E-02,0.));+#8149 = VECTOR('',#8150,1.);+#8150 = DIRECTION('',(0.,-1.));+#8151 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8152 = PCURVE('',#5313,#8153);+#8153 = DEFINITIONAL_REPRESENTATION('',(#8154),#8158);+#8154 = LINE('',#8155,#8156);+#8155 = CARTESIAN_POINT('',(0.,0.));+#8156 = VECTOR('',#8157,1.);+#8157 = DIRECTION('',(0.,-1.));+#8158 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8159 = ADVANCED_FACE('',(#8160),#5313,.T.);+#8160 = FACE_BOUND('',#8161,.T.);+#8161 = EDGE_LOOP('',(#8162,#8163,#8164,#8165));+#8162 = ORIENTED_EDGE('',*,*,#5297,.T.);+#8163 = ORIENTED_EDGE('',*,*,#8139,.T.);+#8164 = ORIENTED_EDGE('',*,*,#7993,.T.);+#8165 = ORIENTED_EDGE('',*,*,#8166,.F.);+#8166 = EDGE_CURVE('',#5271,#7994,#8167,.T.);+#8167 = SURFACE_CURVE('',#8168,(#8172,#8179),.PCURVE_S1.);+#8168 = LINE('',#8169,#8170);+#8169 = CARTESIAN_POINT('',(-0.513078898624,-0.139644122505,1.8000001));+#8170 = VECTOR('',#8171,1.);+#8171 = DIRECTION('',(-0.,-0.,-1.));+#8172 = PCURVE('',#5313,#8173);+#8173 = DEFINITIONAL_REPRESENTATION('',(#8174),#8178);+#8174 = LINE('',#8175,#8176);+#8175 = CARTESIAN_POINT('',(0.294060190267,0.));+#8176 = VECTOR('',#8177,1.);+#8177 = DIRECTION('',(0.,-1.));+#8178 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8179 = PCURVE('',#5286,#8180);+#8180 = DEFINITIONAL_REPRESENTATION('',(#8181),#8185);+#8181 = LINE('',#8182,#8183);+#8182 = CARTESIAN_POINT('',(0.,0.));+#8183 = VECTOR('',#8184,1.);+#8184 = DIRECTION('',(0.,-1.));+#8185 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8186 = ADVANCED_FACE('',(#8187),#5286,.T.);+#8187 = FACE_BOUND('',#8188,.T.);+#8188 = EDGE_LOOP('',(#8189,#8190,#8191,#8192));+#8189 = ORIENTED_EDGE('',*,*,#5270,.T.);+#8190 = ORIENTED_EDGE('',*,*,#8166,.T.);+#8191 = ORIENTED_EDGE('',*,*,#8016,.T.);+#8192 = ORIENTED_EDGE('',*,*,#8193,.F.);+#8193 = EDGE_CURVE('',#5244,#8017,#8194,.T.);+#8194 = SURFACE_CURVE('',#8195,(#8199,#8206),.PCURVE_S1.);+#8195 = LINE('',#8196,#8197);+#8196 = CARTESIAN_POINT('',(-0.563500471771,-0.139644122505,1.8000001));+#8197 = VECTOR('',#8198,1.);+#8198 = DIRECTION('',(-0.,-0.,-1.));+#8199 = PCURVE('',#5286,#8200);+#8200 = DEFINITIONAL_REPRESENTATION('',(#8201),#8205);+#8201 = LINE('',#8202,#8203);+#8202 = CARTESIAN_POINT('',(5.042157314691E-02,0.));+#8203 = VECTOR('',#8204,1.);+#8204 = DIRECTION('',(0.,-1.));+#8205 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8206 = PCURVE('',#5259,#8207);+#8207 = DEFINITIONAL_REPRESENTATION('',(#8208),#8212);+#8208 = LINE('',#8209,#8210);+#8209 = CARTESIAN_POINT('',(0.,0.));+#8210 = VECTOR('',#8211,1.);+#8211 = DIRECTION('',(0.,-1.));+#8212 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8213 = ADVANCED_FACE('',(#8214),#5259,.T.);+#8214 = FACE_BOUND('',#8215,.T.);+#8215 = EDGE_LOOP('',(#8216,#8217,#8218,#8219));+#8216 = ORIENTED_EDGE('',*,*,#5243,.T.);+#8217 = ORIENTED_EDGE('',*,*,#8193,.T.);+#8218 = ORIENTED_EDGE('',*,*,#8039,.T.);+#8219 = ORIENTED_EDGE('',*,*,#8220,.F.);+#8220 = EDGE_CURVE('',#5217,#8040,#8221,.T.);+#8221 = SURFACE_CURVE('',#8222,(#8226,#8233),.PCURVE_S1.);+#8222 = LINE('',#8223,#8224);+#8223 = CARTESIAN_POINT('',(-0.662767943904,0.102418820455,1.8000001));+#8224 = VECTOR('',#8225,1.);+#8225 = DIRECTION('',(-0.,-0.,-1.));+#8226 = PCURVE('',#5259,#8227);+#8227 = DEFINITIONAL_REPRESENTATION('',(#8228),#8232);+#8228 = LINE('',#8229,#8230);+#8229 = CARTESIAN_POINT('',(0.261626641185,0.));+#8230 = VECTOR('',#8231,1.);+#8231 = DIRECTION('',(0.,-1.));+#8232 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8233 = PCURVE('',#5232,#8234);+#8234 = DEFINITIONAL_REPRESENTATION('',(#8235),#8239);+#8235 = LINE('',#8236,#8237);+#8236 = CARTESIAN_POINT('',(0.,0.));+#8237 = VECTOR('',#8238,1.);+#8238 = DIRECTION('',(0.,-1.));+#8239 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8240 = ADVANCED_FACE('',(#8241),#5232,.T.);+#8241 = FACE_BOUND('',#8242,.T.);+#8242 = EDGE_LOOP('',(#8243,#8244,#8245,#8246));+#8243 = ORIENTED_EDGE('',*,*,#5216,.T.);+#8244 = ORIENTED_EDGE('',*,*,#8220,.T.);+#8245 = ORIENTED_EDGE('',*,*,#8062,.T.);+#8246 = ORIENTED_EDGE('',*,*,#8247,.F.);+#8247 = EDGE_CURVE('',#5190,#8063,#8248,.T.);+#8248 = SURFACE_CURVE('',#8249,(#8253,#8260),.PCURVE_S1.);+#8249 = LINE('',#8250,#8251);+#8250 = CARTESIAN_POINT('',(-0.662767943904,-0.139644122505,1.8000001));+#8251 = VECTOR('',#8252,1.);+#8252 = DIRECTION('',(-0.,-0.,-1.));+#8253 = PCURVE('',#5232,#8254);+#8254 = DEFINITIONAL_REPRESENTATION('',(#8255),#8259);+#8255 = LINE('',#8256,#8257);+#8256 = CARTESIAN_POINT('',(0.242062942959,0.));+#8257 = VECTOR('',#8258,1.);+#8258 = DIRECTION('',(0.,-1.));+#8259 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8260 = PCURVE('',#5205,#8261);+#8261 = DEFINITIONAL_REPRESENTATION('',(#8262),#8266);+#8262 = LINE('',#8263,#8264);+#8263 = CARTESIAN_POINT('',(0.,0.));+#8264 = VECTOR('',#8265,1.);+#8265 = DIRECTION('',(0.,-1.));+#8266 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8267 = ADVANCED_FACE('',(#8268),#5205,.T.);+#8268 = FACE_BOUND('',#8269,.T.);+#8269 = EDGE_LOOP('',(#8270,#8271,#8272,#8273));+#8270 = ORIENTED_EDGE('',*,*,#5189,.T.);+#8271 = ORIENTED_EDGE('',*,*,#8247,.T.);+#8272 = ORIENTED_EDGE('',*,*,#8085,.T.);+#8273 = ORIENTED_EDGE('',*,*,#8274,.F.);+#8274 = EDGE_CURVE('',#5163,#7901,#8275,.T.);+#8275 = SURFACE_CURVE('',#8276,(#8280,#8287),.PCURVE_S1.);+#8276 = LINE('',#8277,#8278);+#8277 = CARTESIAN_POINT('',(-0.701175001574,-0.139644122505,1.8000001));+#8278 = VECTOR('',#8279,1.);+#8279 = DIRECTION('',(-0.,-0.,-1.));+#8280 = PCURVE('',#5205,#8281);+#8281 = DEFINITIONAL_REPRESENTATION('',(#8282),#8286);+#8282 = LINE('',#8283,#8284);+#8283 = CARTESIAN_POINT('',(3.84070576705E-02,0.));+#8284 = VECTOR('',#8285,1.);+#8285 = DIRECTION('',(0.,-1.));+#8286 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8287 = PCURVE('',#5178,#8288);+#8288 = DEFINITIONAL_REPRESENTATION('',(#8289),#8293);+#8289 = LINE('',#8290,#8291);+#8290 = CARTESIAN_POINT('',(0.,0.));+#8291 = VECTOR('',#8292,1.);+#8292 = DIRECTION('',(0.,-1.));+#8293 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8294 = ADVANCED_FACE('',(#8295),#5178,.T.);+#8295 = FACE_BOUND('',#8296,.T.);+#8296 = EDGE_LOOP('',(#8297,#8298,#8299,#8300));+#8297 = ORIENTED_EDGE('',*,*,#5162,.T.);+#8298 = ORIENTED_EDGE('',*,*,#8274,.T.);+#8299 = ORIENTED_EDGE('',*,*,#7900,.T.);+#8300 = ORIENTED_EDGE('',*,*,#8301,.F.);+#8301 = EDGE_CURVE('',#5136,#7903,#8302,.T.);+#8302 = SURFACE_CURVE('',#8303,(#8307,#8314),.PCURVE_S1.);+#8303 = LINE('',#8304,#8305);+#8304 = CARTESIAN_POINT('',(-0.701175001574,0.154416067762,1.8000001));+#8305 = VECTOR('',#8306,1.);+#8306 = DIRECTION('',(-0.,-0.,-1.));+#8307 = PCURVE('',#5178,#8308);+#8308 = DEFINITIONAL_REPRESENTATION('',(#8309),#8313);+#8309 = LINE('',#8310,#8311);+#8310 = CARTESIAN_POINT('',(0.294060190267,0.));+#8311 = VECTOR('',#8312,1.);+#8312 = DIRECTION('',(0.,-1.));+#8313 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8314 = PCURVE('',#5151,#8315);+#8315 = DEFINITIONAL_REPRESENTATION('',(#8316),#8320);+#8316 = LINE('',#8317,#8318);+#8317 = CARTESIAN_POINT('',(0.,0.));+#8318 = VECTOR('',#8319,1.);+#8319 = DIRECTION('',(0.,-1.));+#8320 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8321 = ADVANCED_FACE('',(#8322),#5151,.T.);+#8322 = FACE_BOUND('',#8323,.T.);+#8323 = EDGE_LOOP('',(#8324,#8325,#8326,#8327));+#8324 = ORIENTED_EDGE('',*,*,#5133,.T.);+#8325 = ORIENTED_EDGE('',*,*,#8301,.T.);+#8326 = ORIENTED_EDGE('',*,*,#7925,.T.);+#8327 = ORIENTED_EDGE('',*,*,#7825,.F.);+#8328 = ADVANCED_FACE('',(#8329),#5120,.T.);+#8329 = FACE_BOUND('',#8330,.T.);+#8330 = EDGE_LOOP('',(#8331,#8332,#8355,#8383));+#8331 = ORIENTED_EDGE('',*,*,#5106,.T.);+#8332 = ORIENTED_EDGE('',*,*,#8333,.T.);+#8333 = EDGE_CURVE('',#4943,#8334,#8336,.T.);+#8334 = VERTEX_POINT('',#8335);+#8335 = CARTESIAN_POINT('',(-0.273182507636,0.154416067762,1.7000001));+#8336 = SURFACE_CURVE('',#8337,(#8341,#8348),.PCURVE_S1.);+#8337 = LINE('',#8338,#8339);+#8338 = CARTESIAN_POINT('',(-0.273182507636,0.154416067762,1.8000001));+#8339 = VECTOR('',#8340,1.);+#8340 = DIRECTION('',(-0.,-0.,-1.));+#8341 = PCURVE('',#5120,#8342);+#8342 = DEFINITIONAL_REPRESENTATION('',(#8343),#8347);+#8343 = LINE('',#8344,#8345);+#8344 = CARTESIAN_POINT('',(0.,0.));+#8345 = VECTOR('',#8346,1.);+#8346 = DIRECTION('',(0.,-1.));+#8347 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8348 = PCURVE('',#4960,#8349);+#8349 = DEFINITIONAL_REPRESENTATION('',(#8350),#8354);+#8350 = LINE('',#8351,#8352);+#8351 = CARTESIAN_POINT('',(0.185141713899,0.));+#8352 = VECTOR('',#8353,1.);+#8353 = DIRECTION('',(0.,-1.));+#8354 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8355 = ORIENTED_EDGE('',*,*,#8356,.T.);+#8356 = EDGE_CURVE('',#8334,#8357,#8359,.T.);+#8357 = VERTEX_POINT('',#8358);+#8358 = CARTESIAN_POINT('',(-0.273182507636,0.137477570533,1.7000001));+#8359 = SURFACE_CURVE('',#8360,(#8364,#8371),.PCURVE_S1.);+#8360 = LINE('',#8361,#8362);+#8361 = CARTESIAN_POINT('',(-0.273182507636,0.154416067762,1.7000001));+#8362 = VECTOR('',#8363,1.);+#8363 = DIRECTION('',(0.,-1.,0.));+#8364 = PCURVE('',#5120,#8365);+#8365 = DEFINITIONAL_REPRESENTATION('',(#8366),#8370);+#8366 = LINE('',#8367,#8368);+#8367 = CARTESIAN_POINT('',(0.,-0.1));+#8368 = VECTOR('',#8369,1.);+#8369 = DIRECTION('',(1.,0.));+#8370 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8371 = PCURVE('',#8372,#8377);+#8372 = PLANE('',#8373);+#8373 = AXIS2_PLACEMENT_3D('',#8374,#8375,#8376);+#8374 = CARTESIAN_POINT('',(-0.485701560079,-0.139644122505,1.7000001));+#8375 = DIRECTION('',(0.,0.,1.));+#8376 = DIRECTION('',(1.,0.,0.));+#8377 = DEFINITIONAL_REPRESENTATION('',(#8378),#8382);+#8378 = LINE('',#8379,#8380);+#8379 = CARTESIAN_POINT('',(0.212519052443,0.294060190267));+#8380 = VECTOR('',#8381,1.);+#8381 = DIRECTION('',(0.,-1.));+#8382 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8383 = ORIENTED_EDGE('',*,*,#8384,.F.);+#8384 = EDGE_CURVE('',#5080,#8357,#8385,.T.);+#8385 = SURFACE_CURVE('',#8386,(#8390,#8397),.PCURVE_S1.);+#8386 = LINE('',#8387,#8388);+#8387 = CARTESIAN_POINT('',(-0.273182507636,0.137477570533,1.8000001));+#8388 = VECTOR('',#8389,1.);+#8389 = DIRECTION('',(-0.,-0.,-1.));+#8390 = PCURVE('',#5120,#8391);+#8391 = DEFINITIONAL_REPRESENTATION('',(#8392),#8396);+#8392 = LINE('',#8393,#8394);+#8393 = CARTESIAN_POINT('',(1.693849722904E-02,0.));+#8394 = VECTOR('',#8395,1.);+#8395 = DIRECTION('',(0.,-1.));+#8396 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8397 = PCURVE('',#5095,#8398);+#8398 = DEFINITIONAL_REPRESENTATION('',(#8399),#8403);+#8399 = LINE('',#8400,#8401);+#8400 = CARTESIAN_POINT('',(0.,0.));+#8401 = VECTOR('',#8402,1.);+#8402 = DIRECTION('',(0.,-1.));+#8403 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8404 = ADVANCED_FACE('',(#8405),#8372,.T.);+#8405 = FACE_BOUND('',#8406,.F.);+#8406 = EDGE_LOOP('',(#8407,#8432,#8453,#8454,#8477,#8500,#8523));+#8407 = ORIENTED_EDGE('',*,*,#8408,.T.);+#8408 = EDGE_CURVE('',#8409,#8411,#8413,.T.);+#8409 = VERTEX_POINT('',#8410);+#8410 = CARTESIAN_POINT('',(-0.458324221535,0.120932991845,1.7000001));+#8411 = VERTEX_POINT('',#8412);+#8412 = CARTESIAN_POINT('',(-0.458324221535,0.154416067762,1.7000001));+#8413 = SURFACE_CURVE('',#8414,(#8418,#8425),.PCURVE_S1.);+#8414 = LINE('',#8415,#8416);+#8415 = CARTESIAN_POINT('',(-0.458324221535,0.120932991845,1.7000001));+#8416 = VECTOR('',#8417,1.);+#8417 = DIRECTION('',(0.,1.,0.));+#8418 = PCURVE('',#8372,#8419);+#8419 = DEFINITIONAL_REPRESENTATION('',(#8420),#8424);+#8420 = LINE('',#8421,#8422);+#8421 = CARTESIAN_POINT('',(2.737733854461E-02,0.260577114349));+#8422 = VECTOR('',#8423,1.);+#8423 = DIRECTION('',(0.,1.));+#8424 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8425 = PCURVE('',#4987,#8426);+#8426 = DEFINITIONAL_REPRESENTATION('',(#8427),#8431);+#8427 = LINE('',#8428,#8429);+#8428 = CARTESIAN_POINT('',(0.,-0.1));+#8429 = VECTOR('',#8430,1.);+#8430 = DIRECTION('',(1.,0.));+#8431 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8432 = ORIENTED_EDGE('',*,*,#8433,.T.);+#8433 = EDGE_CURVE('',#8411,#8334,#8434,.T.);+#8434 = SURFACE_CURVE('',#8435,(#8439,#8446),.PCURVE_S1.);+#8435 = LINE('',#8436,#8437);+#8436 = CARTESIAN_POINT('',(-0.458324221535,0.154416067762,1.7000001));+#8437 = VECTOR('',#8438,1.);+#8438 = DIRECTION('',(1.,0.,0.));+#8439 = PCURVE('',#8372,#8440);+#8440 = DEFINITIONAL_REPRESENTATION('',(#8441),#8445);+#8441 = LINE('',#8442,#8443);+#8442 = CARTESIAN_POINT('',(2.737733854461E-02,0.294060190267));+#8443 = VECTOR('',#8444,1.);+#8444 = DIRECTION('',(1.,0.));+#8445 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8446 = PCURVE('',#4960,#8447);+#8447 = DEFINITIONAL_REPRESENTATION('',(#8448),#8452);+#8448 = LINE('',#8449,#8450);+#8449 = CARTESIAN_POINT('',(0.,-0.1));+#8450 = VECTOR('',#8451,1.);+#8451 = DIRECTION('',(1.,0.));+#8452 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8453 = ORIENTED_EDGE('',*,*,#8356,.T.);+#8454 = ORIENTED_EDGE('',*,*,#8455,.T.);+#8455 = EDGE_CURVE('',#8357,#8456,#8458,.T.);+#8456 = VERTEX_POINT('',#8457);+#8457 = CARTESIAN_POINT('',(-0.378358757872,-0.139644122505,1.7000001));+#8458 = SURFACE_CURVE('',#8459,(#8463,#8470),.PCURVE_S1.);+#8459 = LINE('',#8460,#8461);+#8460 = CARTESIAN_POINT('',(-0.273182507636,0.137477570533,1.7000001));+#8461 = VECTOR('',#8462,1.);+#8462 = DIRECTION('',(-0.354834508557,-0.934929126478,0.));+#8463 = PCURVE('',#8372,#8464);+#8464 = DEFINITIONAL_REPRESENTATION('',(#8465),#8469);+#8465 = LINE('',#8466,#8467);+#8466 = CARTESIAN_POINT('',(0.212519052443,0.277121693038));+#8467 = VECTOR('',#8468,1.);+#8468 = DIRECTION('',(-0.354834508557,-0.934929126478));+#8469 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8470 = PCURVE('',#5095,#8471);+#8471 = DEFINITIONAL_REPRESENTATION('',(#8472),#8476);+#8472 = LINE('',#8473,#8474);+#8473 = CARTESIAN_POINT('',(-0.,-0.1));+#8474 = VECTOR('',#8475,1.);+#8475 = DIRECTION('',(1.,0.));+#8476 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8477 = ORIENTED_EDGE('',*,*,#8478,.T.);+#8478 = EDGE_CURVE('',#8456,#8479,#8481,.T.);+#8479 = VERTEX_POINT('',#8480);+#8480 = CARTESIAN_POINT('',(-0.419917163864,-0.139644122505,1.7000001));+#8481 = SURFACE_CURVE('',#8482,(#8486,#8493),.PCURVE_S1.);+#8482 = LINE('',#8483,#8484);+#8483 = CARTESIAN_POINT('',(-0.378358757872,-0.139644122505,1.7000001));+#8484 = VECTOR('',#8485,1.);+#8485 = DIRECTION('',(-1.,0.,0.));+#8486 = PCURVE('',#8372,#8487);+#8487 = DEFINITIONAL_REPRESENTATION('',(#8488),#8492);+#8488 = LINE('',#8489,#8490);+#8489 = CARTESIAN_POINT('',(0.107342802207,0.));+#8490 = VECTOR('',#8491,1.);+#8491 = DIRECTION('',(-1.,0.));+#8492 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8493 = PCURVE('',#5068,#8494);+#8494 = DEFINITIONAL_REPRESENTATION('',(#8495),#8499);+#8495 = LINE('',#8496,#8497);+#8496 = CARTESIAN_POINT('',(0.,-0.1));+#8497 = VECTOR('',#8498,1.);+#8498 = DIRECTION('',(1.,0.));+#8499 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8500 = ORIENTED_EDGE('',*,*,#8501,.T.);+#8501 = EDGE_CURVE('',#8479,#8502,#8504,.T.);+#8502 = VERTEX_POINT('',#8503);+#8503 = CARTESIAN_POINT('',(-0.317498343409,0.120932991845,1.7000001));+#8504 = SURFACE_CURVE('',#8505,(#8509,#8516),.PCURVE_S1.);+#8505 = LINE('',#8506,#8507);+#8506 = CARTESIAN_POINT('',(-0.419917163864,-0.139644122505,1.7000001));+#8507 = VECTOR('',#8508,1.);+#8508 = DIRECTION('',(0.365804721382,0.93069162767,0.));+#8509 = PCURVE('',#8372,#8510);+#8510 = DEFINITIONAL_REPRESENTATION('',(#8511),#8515);+#8511 = LINE('',#8512,#8513);+#8512 = CARTESIAN_POINT('',(6.578439621511E-02,0.));+#8513 = VECTOR('',#8514,1.);+#8514 = DIRECTION('',(0.365804721382,0.93069162767));+#8515 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8516 = PCURVE('',#5041,#8517);+#8517 = DEFINITIONAL_REPRESENTATION('',(#8518),#8522);+#8518 = LINE('',#8519,#8520);+#8519 = CARTESIAN_POINT('',(0.,-0.1));+#8520 = VECTOR('',#8521,1.);+#8521 = DIRECTION('',(1.,0.));+#8522 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8523 = ORIENTED_EDGE('',*,*,#8524,.T.);+#8524 = EDGE_CURVE('',#8502,#8409,#8525,.T.);+#8525 = SURFACE_CURVE('',#8526,(#8530,#8537),.PCURVE_S1.);+#8526 = LINE('',#8527,#8528);+#8527 = CARTESIAN_POINT('',(-0.317498343409,0.120932991845,1.7000001));+#8528 = VECTOR('',#8529,1.);+#8529 = DIRECTION('',(-1.,0.,0.));+#8530 = PCURVE('',#8372,#8531);+#8531 = DEFINITIONAL_REPRESENTATION('',(#8532),#8536);+#8532 = LINE('',#8533,#8534);+#8533 = CARTESIAN_POINT('',(0.16820321667,0.260577114349));+#8534 = VECTOR('',#8535,1.);+#8535 = DIRECTION('',(-1.,0.));+#8536 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8537 = PCURVE('',#5014,#8538);+#8538 = DEFINITIONAL_REPRESENTATION('',(#8539),#8543);+#8539 = LINE('',#8540,#8541);+#8540 = CARTESIAN_POINT('',(0.,-0.1));+#8541 = VECTOR('',#8542,1.);+#8542 = DIRECTION('',(1.,0.));+#8543 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8544 = ADVANCED_FACE('',(#8545),#5095,.T.);+#8545 = FACE_BOUND('',#8546,.T.);+#8546 = EDGE_LOOP('',(#8547,#8548,#8549,#8550));+#8547 = ORIENTED_EDGE('',*,*,#5079,.T.);+#8548 = ORIENTED_EDGE('',*,*,#8384,.T.);+#8549 = ORIENTED_EDGE('',*,*,#8455,.T.);+#8550 = ORIENTED_EDGE('',*,*,#8551,.F.);+#8551 = EDGE_CURVE('',#5053,#8456,#8552,.T.);+#8552 = SURFACE_CURVE('',#8553,(#8557,#8564),.PCURVE_S1.);+#8553 = LINE('',#8554,#8555);+#8554 = CARTESIAN_POINT('',(-0.378358757872,-0.139644122505,1.8000001));+#8555 = VECTOR('',#8556,1.);+#8556 = DIRECTION('',(-0.,-0.,-1.));+#8557 = PCURVE('',#5095,#8558);+#8558 = DEFINITIONAL_REPRESENTATION('',(#8559),#8563);+#8559 = LINE('',#8560,#8561);+#8560 = CARTESIAN_POINT('',(0.296409305464,0.));+#8561 = VECTOR('',#8562,1.);+#8562 = DIRECTION('',(0.,-1.));+#8563 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8564 = PCURVE('',#5068,#8565);+#8565 = DEFINITIONAL_REPRESENTATION('',(#8566),#8570);+#8566 = LINE('',#8567,#8568);+#8567 = CARTESIAN_POINT('',(0.,0.));+#8568 = VECTOR('',#8569,1.);+#8569 = DIRECTION('',(0.,-1.));+#8570 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8571 = ADVANCED_FACE('',(#8572),#5068,.T.);+#8572 = FACE_BOUND('',#8573,.T.);+#8573 = EDGE_LOOP('',(#8574,#8575,#8576,#8577));+#8574 = ORIENTED_EDGE('',*,*,#5052,.T.);+#8575 = ORIENTED_EDGE('',*,*,#8551,.T.);+#8576 = ORIENTED_EDGE('',*,*,#8478,.T.);+#8577 = ORIENTED_EDGE('',*,*,#8578,.F.);+#8578 = EDGE_CURVE('',#5026,#8479,#8579,.T.);+#8579 = SURFACE_CURVE('',#8580,(#8584,#8591),.PCURVE_S1.);+#8580 = LINE('',#8581,#8582);+#8581 = CARTESIAN_POINT('',(-0.419917163864,-0.139644122505,1.8000001));+#8582 = VECTOR('',#8583,1.);+#8583 = DIRECTION('',(-0.,-0.,-1.));+#8584 = PCURVE('',#5068,#8585);+#8585 = DEFINITIONAL_REPRESENTATION('',(#8586),#8590);+#8586 = LINE('',#8587,#8588);+#8587 = CARTESIAN_POINT('',(4.155840599218E-02,0.));+#8588 = VECTOR('',#8589,1.);+#8589 = DIRECTION('',(0.,-1.));+#8590 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8591 = PCURVE('',#5041,#8592);+#8592 = DEFINITIONAL_REPRESENTATION('',(#8593),#8597);+#8593 = LINE('',#8594,#8595);+#8594 = CARTESIAN_POINT('',(0.,0.));+#8595 = VECTOR('',#8596,1.);+#8596 = DIRECTION('',(0.,-1.));+#8597 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8598 = ADVANCED_FACE('',(#8599),#5041,.T.);+#8599 = FACE_BOUND('',#8600,.T.);+#8600 = EDGE_LOOP('',(#8601,#8602,#8603,#8604));+#8601 = ORIENTED_EDGE('',*,*,#5025,.T.);+#8602 = ORIENTED_EDGE('',*,*,#8578,.T.);+#8603 = ORIENTED_EDGE('',*,*,#8501,.T.);+#8604 = ORIENTED_EDGE('',*,*,#8605,.F.);+#8605 = EDGE_CURVE('',#4999,#8502,#8606,.T.);+#8606 = SURFACE_CURVE('',#8607,(#8611,#8618),.PCURVE_S1.);+#8607 = LINE('',#8608,#8609);+#8608 = CARTESIAN_POINT('',(-0.317498343409,0.120932991845,1.8000001));+#8609 = VECTOR('',#8610,1.);+#8610 = DIRECTION('',(-0.,-0.,-1.));+#8611 = PCURVE('',#5041,#8612);+#8612 = DEFINITIONAL_REPRESENTATION('',(#8613),#8617);+#8613 = LINE('',#8614,#8615);+#8614 = CARTESIAN_POINT('',(0.279982226768,0.));+#8615 = VECTOR('',#8616,1.);+#8616 = DIRECTION('',(0.,-1.));+#8617 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8618 = PCURVE('',#5014,#8619);+#8619 = DEFINITIONAL_REPRESENTATION('',(#8620),#8624);+#8620 = LINE('',#8621,#8622);+#8621 = CARTESIAN_POINT('',(0.,0.));+#8622 = VECTOR('',#8623,1.);+#8623 = DIRECTION('',(0.,-1.));+#8624 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8625 = ADVANCED_FACE('',(#8626),#5014,.T.);+#8626 = FACE_BOUND('',#8627,.T.);+#8627 = EDGE_LOOP('',(#8628,#8629,#8630,#8631));+#8628 = ORIENTED_EDGE('',*,*,#4998,.T.);+#8629 = ORIENTED_EDGE('',*,*,#8605,.T.);+#8630 = ORIENTED_EDGE('',*,*,#8524,.T.);+#8631 = ORIENTED_EDGE('',*,*,#8632,.F.);+#8632 = EDGE_CURVE('',#4972,#8409,#8633,.T.);+#8633 = SURFACE_CURVE('',#8634,(#8638,#8645),.PCURVE_S1.);+#8634 = LINE('',#8635,#8636);+#8635 = CARTESIAN_POINT('',(-0.458324221535,0.120932991845,1.8000001));+#8636 = VECTOR('',#8637,1.);+#8637 = DIRECTION('',(-0.,-0.,-1.));+#8638 = PCURVE('',#5014,#8639);+#8639 = DEFINITIONAL_REPRESENTATION('',(#8640),#8644);+#8640 = LINE('',#8641,#8642);+#8641 = CARTESIAN_POINT('',(0.140825878125,0.));+#8642 = VECTOR('',#8643,1.);+#8643 = DIRECTION('',(0.,-1.));+#8644 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8645 = PCURVE('',#4987,#8646);+#8646 = DEFINITIONAL_REPRESENTATION('',(#8647),#8651);+#8647 = LINE('',#8648,#8649);+#8648 = CARTESIAN_POINT('',(0.,0.));+#8649 = VECTOR('',#8650,1.);+#8650 = DIRECTION('',(0.,-1.));+#8651 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8652 = ADVANCED_FACE('',(#8653),#4987,.T.);+#8653 = FACE_BOUND('',#8654,.T.);+#8654 = EDGE_LOOP('',(#8655,#8656,#8657,#8658));+#8655 = ORIENTED_EDGE('',*,*,#4971,.T.);+#8656 = ORIENTED_EDGE('',*,*,#8632,.T.);+#8657 = ORIENTED_EDGE('',*,*,#8408,.T.);+#8658 = ORIENTED_EDGE('',*,*,#8659,.F.);+#8659 = EDGE_CURVE('',#4945,#8411,#8660,.T.);+#8660 = SURFACE_CURVE('',#8661,(#8665,#8672),.PCURVE_S1.);+#8661 = LINE('',#8662,#8663);+#8662 = CARTESIAN_POINT('',(-0.458324221535,0.154416067762,1.8000001));+#8663 = VECTOR('',#8664,1.);+#8664 = DIRECTION('',(-0.,-0.,-1.));+#8665 = PCURVE('',#4987,#8666);+#8666 = DEFINITIONAL_REPRESENTATION('',(#8667),#8671);+#8667 = LINE('',#8668,#8669);+#8668 = CARTESIAN_POINT('',(3.348307591787E-02,0.));+#8669 = VECTOR('',#8670,1.);+#8670 = DIRECTION('',(0.,-1.));+#8671 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8672 = PCURVE('',#4960,#8673);+#8673 = DEFINITIONAL_REPRESENTATION('',(#8674),#8678);+#8674 = LINE('',#8675,#8676);+#8675 = CARTESIAN_POINT('',(0.,0.));+#8676 = VECTOR('',#8677,1.);+#8677 = DIRECTION('',(0.,-1.));+#8678 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8679 = ADVANCED_FACE('',(#8680),#4960,.T.);+#8680 = FACE_BOUND('',#8681,.T.);+#8681 = EDGE_LOOP('',(#8682,#8683,#8684,#8685));+#8682 = ORIENTED_EDGE('',*,*,#4942,.T.);+#8683 = ORIENTED_EDGE('',*,*,#8659,.T.);+#8684 = ORIENTED_EDGE('',*,*,#8433,.T.);+#8685 = ORIENTED_EDGE('',*,*,#8333,.F.);+#8686 = ADVANCED_FACE('',(#8687),#4929,.T.);+#8687 = FACE_BOUND('',#8688,.T.);+#8688 = EDGE_LOOP('',(#8689,#8690,#8713,#8741));+#8689 = ORIENTED_EDGE('',*,*,#4915,.T.);+#8690 = ORIENTED_EDGE('',*,*,#8691,.T.);+#8691 = EDGE_CURVE('',#4167,#8692,#8694,.T.);+#8692 = VERTEX_POINT('',#8693);+#8693 = CARTESIAN_POINT('',(-5.317900292839E-02,0.154416067762,1.7000001+ ));+#8694 = SURFACE_CURVE('',#8695,(#8699,#8706),.PCURVE_S1.);+#8695 = LINE('',#8696,#8697);+#8696 = CARTESIAN_POINT('',(-5.317900292839E-02,0.154416067762,1.8000001+ ));+#8697 = VECTOR('',#8698,1.);+#8698 = DIRECTION('',(-0.,-0.,-1.));+#8699 = PCURVE('',#4929,#8700);+#8700 = DEFINITIONAL_REPRESENTATION('',(#8701),#8705);+#8701 = LINE('',#8702,#8703);+#8702 = CARTESIAN_POINT('',(0.,0.));+#8703 = VECTOR('',#8704,1.);+#8704 = DIRECTION('',(0.,-1.));+#8705 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8706 = PCURVE('',#4184,#8707);+#8707 = DEFINITIONAL_REPRESENTATION('',(#8708),#8712);+#8708 = LINE('',#8709,#8710);+#8709 = CARTESIAN_POINT('',(0.148901208199,0.));+#8710 = VECTOR('',#8711,1.);+#8711 = DIRECTION('',(0.,-1.));+#8712 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8713 = ORIENTED_EDGE('',*,*,#8714,.T.);+#8714 = EDGE_CURVE('',#8692,#8715,#8717,.T.);+#8715 = VERTEX_POINT('',#8716);+#8716 = CARTESIAN_POINT('',(-5.317900292839E-02,0.120932991845,1.7000001+ ));+#8717 = SURFACE_CURVE('',#8718,(#8722,#8729),.PCURVE_S1.);+#8718 = LINE('',#8719,#8720);+#8719 = CARTESIAN_POINT('',(-5.317900292839E-02,0.154416067762,1.7000001+ ));+#8720 = VECTOR('',#8721,1.);+#8721 = DIRECTION('',(0.,-1.,0.));+#8722 = PCURVE('',#4929,#8723);+#8723 = DEFINITIONAL_REPRESENTATION('',(#8724),#8728);+#8724 = LINE('',#8725,#8726);+#8725 = CARTESIAN_POINT('',(0.,-0.1));+#8726 = VECTOR('',#8727,1.);+#8727 = DIRECTION('',(1.,0.));+#8728 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8729 = PCURVE('',#8730,#8735);+#8730 = PLANE('',#8731);+#8731 = AXIS2_PLACEMENT_3D('',#8732,#8733,#8734);+#8732 = CARTESIAN_POINT('',(-0.24285078004,-0.139644122505,1.7000001));+#8733 = DIRECTION('',(0.,0.,1.));+#8734 = DIRECTION('',(1.,0.,0.));+#8735 = DEFINITIONAL_REPRESENTATION('',(#8736),#8740);+#8736 = LINE('',#8737,#8738);+#8737 = CARTESIAN_POINT('',(0.189671777111,0.294060190267));+#8738 = VECTOR('',#8739,1.);+#8739 = DIRECTION('',(0.,-1.));+#8740 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8741 = ORIENTED_EDGE('',*,*,#8742,.F.);+#8742 = EDGE_CURVE('',#4889,#8715,#8743,.T.);+#8743 = SURFACE_CURVE('',#8744,(#8748,#8755),.PCURVE_S1.);+#8744 = LINE('',#8745,#8746);+#8745 = CARTESIAN_POINT('',(-5.317900292839E-02,0.120932991845,1.8000001+ ));+#8746 = VECTOR('',#8747,1.);+#8747 = DIRECTION('',(-0.,-0.,-1.));+#8748 = PCURVE('',#4929,#8749);+#8749 = DEFINITIONAL_REPRESENTATION('',(#8750),#8754);+#8750 = LINE('',#8751,#8752);+#8751 = CARTESIAN_POINT('',(3.348307591787E-02,0.));+#8752 = VECTOR('',#8753,1.);+#8753 = DIRECTION('',(0.,-1.));+#8754 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8755 = PCURVE('',#4904,#8756);+#8756 = DEFINITIONAL_REPRESENTATION('',(#8757),#8761);+#8757 = LINE('',#8758,#8759);+#8758 = CARTESIAN_POINT('',(0.,0.));+#8759 = VECTOR('',#8760,1.);+#8760 = DIRECTION('',(0.,-1.));+#8761 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8762 = ADVANCED_FACE('',(#8763),#8730,.T.);+#8763 = FACE_BOUND('',#8764,.F.);+#8764 = EDGE_LOOP('',(#8765,#8790,#8811,#8812,#8835,#8858,#8881,#8904,+ #8927,#8950,#8973,#8996,#9019,#9042,#9065,#9088,#9111,#9134,#9157,+ #9180,#9203,#9226));+#8765 = ORIENTED_EDGE('',*,*,#8766,.T.);+#8766 = EDGE_CURVE('',#8767,#8769,#8771,.T.);+#8767 = VERTEX_POINT('',#8768);+#8768 = CARTESIAN_POINT('',(-0.202080211128,6.696615183575E-03,1.7000001+ ));+#8769 = VERTEX_POINT('',#8770);+#8770 = CARTESIAN_POINT('',(-0.202080211128,0.154416067762,1.7000001));+#8771 = SURFACE_CURVE('',#8772,(#8776,#8783),.PCURVE_S1.);+#8772 = LINE('',#8773,#8774);+#8773 = CARTESIAN_POINT('',(-0.202080211128,6.696615183575E-03,1.7000001+ ));+#8774 = VECTOR('',#8775,1.);+#8775 = DIRECTION('',(0.,1.,0.));+#8776 = PCURVE('',#8730,#8777);+#8777 = DEFINITIONAL_REPRESENTATION('',(#8778),#8782);+#8778 = LINE('',#8779,#8780);+#8779 = CARTESIAN_POINT('',(4.077056891176E-02,0.146340737688));+#8780 = VECTOR('',#8781,1.);+#8781 = DIRECTION('',(0.,1.));+#8782 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8783 = PCURVE('',#4211,#8784);+#8784 = DEFINITIONAL_REPRESENTATION('',(#8785),#8789);+#8785 = LINE('',#8786,#8787);+#8786 = CARTESIAN_POINT('',(0.,-0.1));+#8787 = VECTOR('',#8788,1.);+#8788 = DIRECTION('',(1.,0.));+#8789 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8790 = ORIENTED_EDGE('',*,*,#8791,.T.);+#8791 = EDGE_CURVE('',#8769,#8692,#8792,.T.);+#8792 = SURFACE_CURVE('',#8793,(#8797,#8804),.PCURVE_S1.);+#8793 = LINE('',#8794,#8795);+#8794 = CARTESIAN_POINT('',(-0.202080211128,0.154416067762,1.7000001));+#8795 = VECTOR('',#8796,1.);+#8796 = DIRECTION('',(1.,0.,0.));+#8797 = PCURVE('',#8730,#8798);+#8798 = DEFINITIONAL_REPRESENTATION('',(#8799),#8803);+#8799 = LINE('',#8800,#8801);+#8800 = CARTESIAN_POINT('',(4.077056891176E-02,0.294060190267));+#8801 = VECTOR('',#8802,1.);+#8802 = DIRECTION('',(1.,0.));+#8803 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8804 = PCURVE('',#4184,#8805);+#8805 = DEFINITIONAL_REPRESENTATION('',(#8806),#8810);+#8806 = LINE('',#8807,#8808);+#8807 = CARTESIAN_POINT('',(0.,-0.1));+#8808 = VECTOR('',#8809,1.);+#8809 = DIRECTION('',(1.,0.));+#8810 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8811 = ORIENTED_EDGE('',*,*,#8714,.T.);+#8812 = ORIENTED_EDGE('',*,*,#8813,.T.);+#8813 = EDGE_CURVE('',#8715,#8814,#8816,.T.);+#8814 = VERTEX_POINT('',#8815);+#8815 = CARTESIAN_POINT('',(-0.165839705429,0.120932991845,1.7000001));+#8816 = SURFACE_CURVE('',#8817,(#8821,#8828),.PCURVE_S1.);+#8817 = LINE('',#8818,#8819);+#8818 = CARTESIAN_POINT('',(-5.317900292839E-02,0.120932991845,1.7000001+ ));+#8819 = VECTOR('',#8820,1.);+#8820 = DIRECTION('',(-1.,0.,0.));+#8821 = PCURVE('',#8730,#8822);+#8822 = DEFINITIONAL_REPRESENTATION('',(#8823),#8827);+#8823 = LINE('',#8824,#8825);+#8824 = CARTESIAN_POINT('',(0.189671777111,0.260577114349));+#8825 = VECTOR('',#8826,1.);+#8826 = DIRECTION('',(-1.,0.));+#8827 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8828 = PCURVE('',#4904,#8829);+#8829 = DEFINITIONAL_REPRESENTATION('',(#8830),#8834);+#8830 = LINE('',#8831,#8832);+#8831 = CARTESIAN_POINT('',(0.,-0.1));+#8832 = VECTOR('',#8833,1.);+#8833 = DIRECTION('',(1.,0.));+#8834 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8835 = ORIENTED_EDGE('',*,*,#8836,.T.);+#8836 = EDGE_CURVE('',#8814,#8837,#8839,.T.);+#8837 = VERTEX_POINT('',#8838);+#8838 = CARTESIAN_POINT('',(-0.165839705429,4.864893971597E-02,1.7000001+ ));+#8839 = SURFACE_CURVE('',#8840,(#8844,#8851),.PCURVE_S1.);+#8840 = LINE('',#8841,#8842);+#8841 = CARTESIAN_POINT('',(-0.165839705429,0.120932991845,1.7000001));+#8842 = VECTOR('',#8843,1.);+#8843 = DIRECTION('',(0.,-1.,0.));+#8844 = PCURVE('',#8730,#8845);+#8845 = DEFINITIONAL_REPRESENTATION('',(#8846),#8850);+#8846 = LINE('',#8847,#8848);+#8847 = CARTESIAN_POINT('',(7.701107461111E-02,0.260577114349));+#8848 = VECTOR('',#8849,1.);+#8849 = DIRECTION('',(0.,-1.));+#8850 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8851 = PCURVE('',#4877,#8852);+#8852 = DEFINITIONAL_REPRESENTATION('',(#8853),#8857);+#8853 = LINE('',#8854,#8855);+#8854 = CARTESIAN_POINT('',(0.,-0.1));+#8855 = VECTOR('',#8856,1.);+#8856 = DIRECTION('',(1.,0.));+#8857 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8858 = ORIENTED_EDGE('',*,*,#8859,.T.);+#8859 = EDGE_CURVE('',#8837,#8860,#8862,.T.);+#8860 = VERTEX_POINT('',#8861);+#8861 = CARTESIAN_POINT('',(-0.148802728564,5.327748256344E-02,1.7000001+ ));+#8862 = SURFACE_CURVE('',#8863,(#8867,#8874),.PCURVE_S1.);+#8863 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8864,#8865,#8866),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8864 = CARTESIAN_POINT('',(-0.165839705429,4.864893971597E-02,1.7000001+ ));+#8865 = CARTESIAN_POINT('',(-0.157370456814,5.180028803765E-02,1.7000001+ ));+#8866 = CARTESIAN_POINT('',(-0.148802728564,5.327748256344E-02,1.7000001+ ));+#8867 = PCURVE('',#8730,#8868);+#8868 = DEFINITIONAL_REPRESENTATION('',(#8869),#8873);+#8869 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8870,#8871,#8872),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8870 = CARTESIAN_POINT('',(7.701107461111E-02,0.188293062221));+#8871 = CARTESIAN_POINT('',(8.548032322563E-02,0.191444410542));+#8872 = CARTESIAN_POINT('',(9.40480514752E-02,0.192921605068));+#8873 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8874 = PCURVE('',#4845,#8875);+#8875 = DEFINITIONAL_REPRESENTATION('',(#8876),#8880);+#8876 = LINE('',#8877,#8878);+#8877 = CARTESIAN_POINT('',(0.,-0.1));+#8878 = VECTOR('',#8879,1.);+#8879 = DIRECTION('',(1.,0.));+#8880 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8881 = ORIENTED_EDGE('',*,*,#8882,.T.);+#8882 = EDGE_CURVE('',#8860,#8883,#8885,.T.);+#8883 = VERTEX_POINT('',#8884);+#8884 = CARTESIAN_POINT('',(-0.13156879243,5.475467708923E-02,1.7000001)+ );+#8885 = SURFACE_CURVE('',#8886,(#8890,#8897),.PCURVE_S1.);+#8886 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8887,#8888,#8889),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8887 = CARTESIAN_POINT('',(-0.148802728564,5.327748256344E-02,1.7000001+ ));+#8888 = CARTESIAN_POINT('',(-0.140235000315,5.475467708923E-02,1.7000001+ ));+#8889 = CARTESIAN_POINT('',(-0.13156879243,5.475467708923E-02,1.7000001)+ );+#8890 = PCURVE('',#8730,#8891);+#8891 = DEFINITIONAL_REPRESENTATION('',(#8892),#8896);+#8892 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8893,#8894,#8895),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8893 = CARTESIAN_POINT('',(9.40480514752E-02,0.192921605068));+#8894 = CARTESIAN_POINT('',(0.102615779725,0.194398799594));+#8895 = CARTESIAN_POINT('',(0.111281987609,0.194398799594));+#8896 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8897 = PCURVE('',#4809,#8898);+#8898 = DEFINITIONAL_REPRESENTATION('',(#8899),#8903);+#8899 = LINE('',#8900,#8901);+#8900 = CARTESIAN_POINT('',(0.,-0.1));+#8901 = VECTOR('',#8902,1.);+#8902 = DIRECTION('',(1.,0.));+#8903 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8904 = ORIENTED_EDGE('',*,*,#8905,.T.);+#8905 = EDGE_CURVE('',#8883,#8906,#8908,.T.);+#8906 = VERTEX_POINT('',#8907);+#8907 = CARTESIAN_POINT('',(-5.908778103154E-02,2.777125708482E-02,+ 1.7000001));+#8908 = SURFACE_CURVE('',#8909,(#8913,#8920),.PCURVE_S1.);+#8909 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8910,#8911,#8912),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8910 = CARTESIAN_POINT('',(-0.13156879243,5.475467708923E-02,1.7000001)+ );+#8911 = CARTESIAN_POINT('',(-8.587424176584E-02,5.475467708923E-02,+ 1.7000001));+#8912 = CARTESIAN_POINT('',(-5.908778103154E-02,2.777125708482E-02,+ 1.7000001));+#8913 = PCURVE('',#8730,#8914);+#8914 = DEFINITIONAL_REPRESENTATION('',(#8915),#8919);+#8915 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8916,#8917,#8918),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8916 = CARTESIAN_POINT('',(0.111281987609,0.194398799594));+#8917 = CARTESIAN_POINT('',(0.156976538274,0.194398799594));+#8918 = CARTESIAN_POINT('',(0.183762999008,0.167415379589));+#8919 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8920 = PCURVE('',#4770,#8921);+#8921 = DEFINITIONAL_REPRESENTATION('',(#8922),#8926);+#8922 = LINE('',#8923,#8924);+#8923 = CARTESIAN_POINT('',(0.,-0.1));+#8924 = VECTOR('',#8925,1.);+#8925 = DIRECTION('',(1.,0.));+#8926 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8927 = ORIENTED_EDGE('',*,*,#8928,.T.);+#8928 = EDGE_CURVE('',#8906,#8929,#8931,.T.);+#8929 = VERTEX_POINT('',#8930);+#8930 = CARTESIAN_POINT('',(-3.230132029724E-02,-4.530063212418E-02,+ 1.7000001));+#8931 = SURFACE_CURVE('',#8932,(#8936,#8943),.PCURVE_S1.);+#8932 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8933,#8934,#8935),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8933 = CARTESIAN_POINT('',(-5.908778103154E-02,2.777125708482E-02,+ 1.7000001));+#8934 = CARTESIAN_POINT('',(-3.230132029724E-02,7.878370804205E-04,+ 1.7000001));+#8935 = CARTESIAN_POINT('',(-3.230132029724E-02,-4.530063212418E-02,+ 1.7000001));+#8936 = PCURVE('',#8730,#8937);+#8937 = DEFINITIONAL_REPRESENTATION('',(#8938),#8942);+#8938 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8939,#8940,#8941),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8939 = CARTESIAN_POINT('',(0.183762999008,0.167415379589));+#8940 = CARTESIAN_POINT('',(0.210549459742,0.140431959585));+#8941 = CARTESIAN_POINT('',(0.210549459742,9.434349038036E-02));+#8942 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8943 = PCURVE('',#4725,#8944);+#8944 = DEFINITIONAL_REPRESENTATION('',(#8945),#8949);+#8945 = LINE('',#8946,#8947);+#8946 = CARTESIAN_POINT('',(0.,-0.1));+#8947 = VECTOR('',#8948,1.);+#8948 = DIRECTION('',(1.,0.));+#8949 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8950 = ORIENTED_EDGE('',*,*,#8951,.T.);+#8951 = EDGE_CURVE('',#8929,#8952,#8954,.T.);+#8952 = VERTEX_POINT('',#8953);+#8953 = CARTESIAN_POINT('',(-6.036801628722E-02,-0.118569480603,+ 1.7000001));+#8954 = SURFACE_CURVE('',#8955,(#8959,#8966),.PCURVE_S1.);+#8955 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8956,#8957,#8958),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8956 = CARTESIAN_POINT('',(-3.230132029724E-02,-4.530063212418E-02,+ 1.7000001));+#8957 = CARTESIAN_POINT('',(-3.230132029724E-02,-9.178301986899E-02,+ 1.7000001));+#8958 = CARTESIAN_POINT('',(-6.036801628722E-02,-0.118569480603,+ 1.7000001));+#8959 = PCURVE('',#8730,#8960);+#8960 = DEFINITIONAL_REPRESENTATION('',(#8961),#8965);+#8961 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8962,#8963,#8964),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8962 = CARTESIAN_POINT('',(0.210549459742,9.434349038036E-02));+#8963 = CARTESIAN_POINT('',(0.210549459742,4.786110263555E-02));+#8964 = CARTESIAN_POINT('',(0.182482763752,2.107464190125E-02));+#8965 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8966 = PCURVE('',#4680,#8967);+#8967 = DEFINITIONAL_REPRESENTATION('',(#8968),#8972);+#8968 = LINE('',#8969,#8970);+#8969 = CARTESIAN_POINT('',(0.,-0.1));+#8970 = VECTOR('',#8971,1.);+#8971 = DIRECTION('',(1.,0.));+#8972 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8973 = ORIENTED_EDGE('',*,*,#8974,.T.);+#8974 = EDGE_CURVE('',#8952,#8975,#8977,.T.);+#8975 = VERTEX_POINT('',#8976);+#8976 = CARTESIAN_POINT('',(-0.137083651993,-0.145355941338,1.7000001));+#8977 = SURFACE_CURVE('',#8978,(#8982,#8989),.PCURVE_S1.);+#8978 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8979,#8980,#8981),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8979 = CARTESIAN_POINT('',(-6.036801628722E-02,-0.118569480603,+ 1.7000001));+#8980 = CARTESIAN_POINT('',(-8.84347122772E-02,-0.145355941338,1.7000001+ ));+#8981 = CARTESIAN_POINT('',(-0.137083651993,-0.145355941338,1.7000001));+#8982 = PCURVE('',#8730,#8983);+#8983 = DEFINITIONAL_REPRESENTATION('',(#8984),#8988);+#8984 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8985,#8986,#8987),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8985 = CARTESIAN_POINT('',(0.182482763752,2.107464190125E-02));+#8986 = CARTESIAN_POINT('',(0.154416067762,-5.711818833049E-03));+#8987 = CARTESIAN_POINT('',(0.105767128046,-5.711818833049E-03));+#8988 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8989 = PCURVE('',#4638,#8990);+#8990 = DEFINITIONAL_REPRESENTATION('',(#8991),#8995);+#8991 = LINE('',#8992,#8993);+#8992 = CARTESIAN_POINT('',(0.,-0.1));+#8993 = VECTOR('',#8994,1.);+#8994 = DIRECTION('',(1.,0.));+#8995 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8996 = ORIENTED_EDGE('',*,*,#8997,.T.);+#8997 = EDGE_CURVE('',#8975,#8998,#9000,.T.);+#8998 = VERTEX_POINT('',#8999);+#8999 = CARTESIAN_POINT('',(-0.179922293241,-0.142204593016,1.7000001));+#9000 = SURFACE_CURVE('',#9001,(#9005,#9012),.PCURVE_S1.);+#9001 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9002,#9003,#9004),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9002 = CARTESIAN_POINT('',(-0.137083651993,-0.145355941338,1.7000001));+#9003 = CARTESIAN_POINT('',(-0.160521805136,-0.145355941338,1.7000001));+#9004 = CARTESIAN_POINT('',(-0.179922293241,-0.142204593016,1.7000001));+#9005 = PCURVE('',#8730,#9006);+#9006 = DEFINITIONAL_REPRESENTATION('',(#9007),#9011);+#9007 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9008,#9009,#9010),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9008 = CARTESIAN_POINT('',(0.105767128046,-5.711818833049E-03));+#9009 = CARTESIAN_POINT('',(8.232897490395E-02,-5.711818833049E-03));+#9010 = CARTESIAN_POINT('',(6.292848679859E-02,-2.560470511367E-03));+#9011 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9012 = PCURVE('',#4602,#9013);+#9013 = DEFINITIONAL_REPRESENTATION('',(#9014),#9018);+#9014 = LINE('',#9015,#9016);+#9015 = CARTESIAN_POINT('',(0.,-0.1));+#9016 = VECTOR('',#9017,1.);+#9017 = DIRECTION('',(1.,0.));+#9018 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9019 = ORIENTED_EDGE('',*,*,#9020,.T.);+#9020 = EDGE_CURVE('',#8998,#9021,#9023,.T.);+#9021 = VERTEX_POINT('',#9022);+#9022 = CARTESIAN_POINT('',(-0.214685604415,-0.132750548051,1.7000001));+#9023 = SURFACE_CURVE('',#9024,(#9028,#9035),.PCURVE_S1.);+#9024 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9025,#9026,#9027),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9025 = CARTESIAN_POINT('',(-0.179922293241,-0.142204593016,1.7000001));+#9026 = CARTESIAN_POINT('',(-0.199322781346,-0.139053244694,1.7000001));+#9027 = CARTESIAN_POINT('',(-0.214685604415,-0.132750548051,1.7000001));+#9028 = PCURVE('',#8730,#9029);+#9029 = DEFINITIONAL_REPRESENTATION('',(#9030),#9034);+#9030 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9031,#9032,#9033),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9031 = CARTESIAN_POINT('',(6.292848679859E-02,-2.560470511367E-03));+#9032 = CARTESIAN_POINT('',(4.352799869323E-02,5.908778103154E-04));+#9033 = CARTESIAN_POINT('',(2.816517562503E-02,6.89357445368E-03));+#9034 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9035 = PCURVE('',#4566,#9036);+#9036 = DEFINITIONAL_REPRESENTATION('',(#9037),#9041);+#9037 = LINE('',#9038,#9039);+#9038 = CARTESIAN_POINT('',(0.,-0.1));+#9039 = VECTOR('',#9040,1.);+#9040 = DIRECTION('',(1.,0.));+#9041 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9042 = ORIENTED_EDGE('',*,*,#9043,.T.);+#9043 = EDGE_CURVE('',#9021,#9044,#9046,.T.);+#9044 = VERTEX_POINT('',#9045);+#9045 = CARTESIAN_POINT('',(-0.214685604415,-9.237389767931E-02,+ 1.7000001));+#9046 = SURFACE_CURVE('',#9047,(#9051,#9058),.PCURVE_S1.);+#9047 = LINE('',#9048,#9049);+#9048 = CARTESIAN_POINT('',(-0.214685604415,-0.132750548051,1.7000001));+#9049 = VECTOR('',#9050,1.);+#9050 = DIRECTION('',(0.,1.,0.));+#9051 = PCURVE('',#8730,#9052);+#9052 = DEFINITIONAL_REPRESENTATION('',(#9053),#9057);+#9053 = LINE('',#9054,#9055);+#9054 = CARTESIAN_POINT('',(2.816517562503E-02,6.89357445368E-03));+#9055 = VECTOR('',#9056,1.);+#9056 = DIRECTION('',(0.,1.));+#9057 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9058 = PCURVE('',#4535,#9059);+#9059 = DEFINITIONAL_REPRESENTATION('',(#9060),#9064);+#9060 = LINE('',#9061,#9062);+#9061 = CARTESIAN_POINT('',(0.,-0.1));+#9062 = VECTOR('',#9063,1.);+#9063 = DIRECTION('',(1.,0.));+#9064 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9065 = ORIENTED_EDGE('',*,*,#9066,.T.);+#9066 = EDGE_CURVE('',#9044,#9067,#9069,.T.);+#9067 = VERTEX_POINT('',#9068);+#9068 = CARTESIAN_POINT('',(-0.178248139445,-0.107047363302,1.7000001));+#9069 = SURFACE_CURVE('',#9070,(#9074,#9081),.PCURVE_S1.);+#9070 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9071,#9072,#9073),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9071 = CARTESIAN_POINT('',(-0.214685604415,-9.237389767931E-02,+ 1.7000001));+#9072 = CARTESIAN_POINT('',(-0.196565351565,-0.102221861185,1.7000001));+#9073 = CARTESIAN_POINT('',(-0.178248139445,-0.107047363302,1.7000001));+#9074 = PCURVE('',#8730,#9075);+#9075 = DEFINITIONAL_REPRESENTATION('',(#9076),#9080);+#9076 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9077,#9078,#9079),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9077 = CARTESIAN_POINT('',(2.816517562503E-02,4.727022482523E-02));+#9078 = CARTESIAN_POINT('',(4.628542847471E-02,3.742226131998E-02));+#9079 = CARTESIAN_POINT('',(6.460264059448E-02,3.25967592024E-02));+#9080 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9081 = PCURVE('',#4503,#9082);+#9082 = DEFINITIONAL_REPRESENTATION('',(#9083),#9087);+#9083 = LINE('',#9084,#9085);+#9084 = CARTESIAN_POINT('',(0.,-0.1));+#9085 = VECTOR('',#9086,1.);+#9086 = DIRECTION('',(1.,0.));+#9087 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9088 = ORIENTED_EDGE('',*,*,#9089,.T.);+#9089 = EDGE_CURVE('',#9067,#9090,#9092,.T.);+#9090 = VERTEX_POINT('',#9091);+#9091 = CARTESIAN_POINT('',(-0.140825878125,-0.11187286542,1.7000001));+#9092 = SURFACE_CURVE('',#9093,(#9097,#9104),.PCURVE_S1.);+#9093 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9094,#9095,#9096),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9094 = CARTESIAN_POINT('',(-0.178248139445,-0.107047363302,1.7000001));+#9095 = CARTESIAN_POINT('',(-0.159930927325,-0.11187286542,1.7000001));+#9096 = CARTESIAN_POINT('',(-0.140825878125,-0.11187286542,1.7000001));+#9097 = PCURVE('',#8730,#9098);+#9098 = DEFINITIONAL_REPRESENTATION('',(#9099),#9103);+#9099 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9100,#9101,#9102),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9100 = CARTESIAN_POINT('',(6.460264059448E-02,3.25967592024E-02));+#9101 = CARTESIAN_POINT('',(8.291985271426E-02,2.777125708482E-02));+#9102 = CARTESIAN_POINT('',(0.102024901914,2.777125708482E-02));+#9103 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9104 = PCURVE('',#4467,#9105);+#9105 = DEFINITIONAL_REPRESENTATION('',(#9106),#9110);+#9106 = LINE('',#9107,#9108);+#9107 = CARTESIAN_POINT('',(0.,-0.1));+#9108 = VECTOR('',#9109,1.);+#9109 = DIRECTION('',(1.,0.));+#9110 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9111 = ORIENTED_EDGE('',*,*,#9112,.T.);+#9112 = EDGE_CURVE('',#9090,#9113,#9115,.T.);+#9113 = VERTEX_POINT('',#9114);+#9114 = CARTESIAN_POINT('',(-9.01088660731E-02,-9.454044965046E-02,+ 1.7000001));+#9115 = SURFACE_CURVE('',#9116,(#9120,#9127),.PCURVE_S1.);+#9116 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9117,#9118,#9119),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9117 = CARTESIAN_POINT('',(-0.140825878125,-0.11187286542,1.7000001));+#9118 = CARTESIAN_POINT('',(-0.107933680018,-0.11187286542,1.7000001));+#9119 = CARTESIAN_POINT('',(-9.01088660731E-02,-9.454044965046E-02,+ 1.7000001));+#9120 = PCURVE('',#8730,#9121);+#9121 = DEFINITIONAL_REPRESENTATION('',(#9122),#9126);+#9122 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9123,#9124,#9125),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9123 = CARTESIAN_POINT('',(0.102024901914,2.777125708482E-02));+#9124 = CARTESIAN_POINT('',(0.134917100022,2.777125708482E-02));+#9125 = CARTESIAN_POINT('',(0.152741913967,4.510367285408E-02));+#9126 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9127 = PCURVE('',#4431,#9128);+#9128 = DEFINITIONAL_REPRESENTATION('',(#9129),#9133);+#9129 = LINE('',#9130,#9131);+#9130 = CARTESIAN_POINT('',(0.,-0.1));+#9131 = VECTOR('',#9132,1.);+#9132 = DIRECTION('',(1.,0.));+#9133 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9134 = ORIENTED_EDGE('',*,*,#9135,.T.);+#9135 = EDGE_CURVE('',#9113,#9136,#9138,.T.);+#9136 = VERTEX_POINT('',#9137);+#9137 = CARTESIAN_POINT('',(-7.228405212858E-02,-4.530063212418E-02,+ 1.7000001));+#9138 = SURFACE_CURVE('',#9139,(#9143,#9150),.PCURVE_S1.);+#9139 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9140,#9141,#9142),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9140 = CARTESIAN_POINT('',(-9.01088660731E-02,-9.454044965046E-02,+ 1.7000001));+#9141 = CARTESIAN_POINT('',(-7.228405212858E-02,-7.720803388121E-02,+ 1.7000001));+#9142 = CARTESIAN_POINT('',(-7.228405212858E-02,-4.530063212418E-02,+ 1.7000001));+#9143 = PCURVE('',#8730,#9144);+#9144 = DEFINITIONAL_REPRESENTATION('',(#9145),#9149);+#9145 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9146,#9147,#9148),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9146 = CARTESIAN_POINT('',(0.152741913967,4.510367285408E-02));+#9147 = CARTESIAN_POINT('',(0.170566727911,6.243608862333E-02));+#9148 = CARTESIAN_POINT('',(0.170566727911,9.434349038036E-02));+#9149 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9150 = PCURVE('',#4395,#9151);+#9151 = DEFINITIONAL_REPRESENTATION('',(#9152),#9156);+#9152 = LINE('',#9153,#9154);+#9153 = CARTESIAN_POINT('',(0.,-0.1));+#9154 = VECTOR('',#9155,1.);+#9155 = DIRECTION('',(1.,0.));+#9156 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9157 = ORIENTED_EDGE('',*,*,#9158,.T.);+#9158 = EDGE_CURVE('',#9136,#9159,#9161,.T.);+#9159 = VERTEX_POINT('',#9160);+#9160 = CARTESIAN_POINT('',(-9.069974388341E-02,3.742226131998E-03,+ 1.7000001));+#9161 = SURFACE_CURVE('',#9162,(#9166,#9173),.PCURVE_S1.);+#9162 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9163,#9164,#9165),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9163 = CARTESIAN_POINT('',(-7.228405212858E-02,-4.530063212418E-02,+ 1.7000001));+#9164 = CARTESIAN_POINT('',(-7.228405212858E-02,-1.378714890736E-02,+ 1.7000001));+#9165 = CARTESIAN_POINT('',(-9.069974388341E-02,3.742226131998E-03,+ 1.7000001));+#9166 = PCURVE('',#8730,#9167);+#9167 = DEFINITIONAL_REPRESENTATION('',(#9168),#9172);+#9168 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9169,#9170,#9171),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9169 = CARTESIAN_POINT('',(0.170566727911,9.434349038036E-02));+#9170 = CARTESIAN_POINT('',(0.170566727911,0.125856973597));+#9171 = CARTESIAN_POINT('',(0.152151036156,0.143386348637));+#9172 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9173 = PCURVE('',#4356,#9174);+#9174 = DEFINITIONAL_REPRESENTATION('',(#9175),#9179);+#9175 = LINE('',#9176,#9177);+#9176 = CARTESIAN_POINT('',(0.,-0.1));+#9177 = VECTOR('',#9178,1.);+#9178 = DIRECTION('',(1.,0.));+#9179 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9180 = ORIENTED_EDGE('',*,*,#9181,.T.);+#9181 = EDGE_CURVE('',#9159,#9182,#9184,.T.);+#9182 = VERTEX_POINT('',#9183);+#9183 = CARTESIAN_POINT('',(-0.142007633746,2.127160117135E-02,1.7000001+ ));+#9184 = SURFACE_CURVE('',#9185,(#9189,#9196),.PCURVE_S1.);+#9185 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9186,#9187,#9188),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9186 = CARTESIAN_POINT('',(-9.069974388341E-02,3.742226131998E-03,+ 1.7000001));+#9187 = CARTESIAN_POINT('',(-0.109115435638,2.127160117135E-02,1.7000001+ ));+#9188 = CARTESIAN_POINT('',(-0.142007633746,2.127160117135E-02,1.7000001+ ));+#9189 = PCURVE('',#8730,#9190);+#9190 = DEFINITIONAL_REPRESENTATION('',(#9191),#9195);+#9191 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9192,#9193,#9194),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9192 = CARTESIAN_POINT('',(0.152151036156,0.143386348637));+#9193 = CARTESIAN_POINT('',(0.133735344401,0.160915723676));+#9194 = CARTESIAN_POINT('',(0.100843146294,0.160915723676));+#9195 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9196 = PCURVE('',#4314,#9197);+#9197 = DEFINITIONAL_REPRESENTATION('',(#9198),#9202);+#9198 = LINE('',#9199,#9200);+#9199 = CARTESIAN_POINT('',(0.,-0.1));+#9200 = VECTOR('',#9201,1.);+#9201 = DIRECTION('',(1.,0.));+#9202 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9203 = ORIENTED_EDGE('',*,*,#9204,.T.);+#9204 = EDGE_CURVE('',#9182,#9205,#9207,.T.);+#9205 = VERTEX_POINT('',#9206);+#9206 = CARTESIAN_POINT('',(-0.173127198422,1.762785467441E-02,1.7000001+ ));+#9207 = SURFACE_CURVE('',#9208,(#9212,#9219),.PCURVE_S1.);+#9208 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9209,#9210,#9211),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9209 = CARTESIAN_POINT('',(-0.142007633746,2.127160117135E-02,1.7000001+ ));+#9210 = CARTESIAN_POINT('',(-0.157961334624,2.127160117135E-02,1.7000001+ ));+#9211 = CARTESIAN_POINT('',(-0.173127198422,1.762785467441E-02,1.7000001+ ));+#9212 = PCURVE('',#8730,#9213);+#9213 = DEFINITIONAL_REPRESENTATION('',(#9214),#9218);+#9214 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9215,#9216,#9217),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9215 = CARTESIAN_POINT('',(0.100843146294,0.160915723676));+#9216 = CARTESIAN_POINT('',(8.488944541531E-02,0.160915723676));+#9217 = CARTESIAN_POINT('',(6.972358161722E-02,0.157271977179));+#9218 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9219 = PCURVE('',#4278,#9220);+#9220 = DEFINITIONAL_REPRESENTATION('',(#9221),#9225);+#9221 = LINE('',#9222,#9223);+#9222 = CARTESIAN_POINT('',(0.,-0.1));+#9223 = VECTOR('',#9224,1.);+#9224 = DIRECTION('',(1.,0.));+#9225 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9226 = ORIENTED_EDGE('',*,*,#9227,.T.);+#9227 = EDGE_CURVE('',#9205,#8767,#9228,.T.);+#9228 = SURFACE_CURVE('',#9229,(#9233,#9240),.PCURVE_S1.);+#9229 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9230,#9231,#9232),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9230 = CARTESIAN_POINT('',(-0.173127198422,1.762785467441E-02,1.7000001+ ));+#9231 = CARTESIAN_POINT('',(-0.188293062221,1.398410817746E-02,1.7000001+ ));+#9232 = CARTESIAN_POINT('',(-0.202080211128,6.696615183575E-03,1.7000001+ ));+#9233 = PCURVE('',#8730,#9234);+#9234 = DEFINITIONAL_REPRESENTATION('',(#9235),#9239);+#9235 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9236,#9237,#9238),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9236 = CARTESIAN_POINT('',(6.972358161722E-02,0.157271977179));+#9237 = CARTESIAN_POINT('',(5.455771781912E-02,0.153628230682));+#9238 = CARTESIAN_POINT('',(4.077056891176E-02,0.146340737688));+#9239 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9240 = PCURVE('',#4242,#9241);+#9241 = DEFINITIONAL_REPRESENTATION('',(#9242),#9246);+#9242 = LINE('',#9243,#9244);+#9243 = CARTESIAN_POINT('',(0.,-0.1));+#9244 = VECTOR('',#9245,1.);+#9245 = DIRECTION('',(1.,0.));+#9246 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9247 = ADVANCED_FACE('',(#9248),#4904,.T.);+#9248 = FACE_BOUND('',#9249,.T.);+#9249 = EDGE_LOOP('',(#9250,#9251,#9252,#9253));+#9250 = ORIENTED_EDGE('',*,*,#4888,.T.);+#9251 = ORIENTED_EDGE('',*,*,#8742,.T.);+#9252 = ORIENTED_EDGE('',*,*,#8813,.T.);+#9253 = ORIENTED_EDGE('',*,*,#9254,.F.);+#9254 = EDGE_CURVE('',#4862,#8814,#9255,.T.);+#9255 = SURFACE_CURVE('',#9256,(#9260,#9267),.PCURVE_S1.);+#9256 = LINE('',#9257,#9258);+#9257 = CARTESIAN_POINT('',(-0.165839705429,0.120932991845,1.8000001));+#9258 = VECTOR('',#9259,1.);+#9259 = DIRECTION('',(-0.,-0.,-1.));+#9260 = PCURVE('',#4904,#9261);+#9261 = DEFINITIONAL_REPRESENTATION('',(#9262),#9266);+#9262 = LINE('',#9263,#9264);+#9263 = CARTESIAN_POINT('',(0.1126607025,0.));+#9264 = VECTOR('',#9265,1.);+#9265 = DIRECTION('',(0.,-1.));+#9266 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9267 = PCURVE('',#4877,#9268);+#9268 = DEFINITIONAL_REPRESENTATION('',(#9269),#9273);+#9269 = LINE('',#9270,#9271);+#9270 = CARTESIAN_POINT('',(0.,0.));+#9271 = VECTOR('',#9272,1.);+#9272 = DIRECTION('',(0.,-1.));+#9273 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9274 = ADVANCED_FACE('',(#9275),#4877,.T.);+#9275 = FACE_BOUND('',#9276,.T.);+#9276 = EDGE_LOOP('',(#9277,#9278,#9279,#9280));+#9277 = ORIENTED_EDGE('',*,*,#4861,.T.);+#9278 = ORIENTED_EDGE('',*,*,#9254,.T.);+#9279 = ORIENTED_EDGE('',*,*,#8836,.T.);+#9280 = ORIENTED_EDGE('',*,*,#9281,.F.);+#9281 = EDGE_CURVE('',#4826,#8837,#9282,.T.);+#9282 = SURFACE_CURVE('',#9283,(#9287,#9294),.PCURVE_S1.);+#9283 = LINE('',#9284,#9285);+#9284 = CARTESIAN_POINT('',(-0.165839705429,4.864893971597E-02,1.8000001+ ));+#9285 = VECTOR('',#9286,1.);+#9286 = DIRECTION('',(-0.,-0.,-1.));+#9287 = PCURVE('',#4877,#9288);+#9288 = DEFINITIONAL_REPRESENTATION('',(#9289),#9293);+#9289 = LINE('',#9290,#9291);+#9290 = CARTESIAN_POINT('',(7.228405212858E-02,0.));+#9291 = VECTOR('',#9292,1.);+#9292 = DIRECTION('',(0.,-1.));+#9293 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9294 = PCURVE('',#4845,#9295);+#9295 = DEFINITIONAL_REPRESENTATION('',(#9296),#9300);+#9296 = LINE('',#9297,#9298);+#9297 = CARTESIAN_POINT('',(0.,0.));+#9298 = VECTOR('',#9299,1.);+#9299 = DIRECTION('',(0.,-1.));+#9300 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9301 = ADVANCED_FACE('',(#9302),#4845,.T.);+#9302 = FACE_BOUND('',#9303,.T.);+#9303 = EDGE_LOOP('',(#9304,#9305,#9306,#9307));+#9304 = ORIENTED_EDGE('',*,*,#4825,.T.);+#9305 = ORIENTED_EDGE('',*,*,#9281,.T.);+#9306 = ORIENTED_EDGE('',*,*,#8859,.T.);+#9307 = ORIENTED_EDGE('',*,*,#9308,.F.);+#9308 = EDGE_CURVE('',#4790,#8860,#9309,.T.);+#9309 = SURFACE_CURVE('',#9310,(#9314,#9321),.PCURVE_S1.);+#9310 = LINE('',#9311,#9312);+#9311 = CARTESIAN_POINT('',(-0.148802728564,5.327748256344E-02,1.8000001+ ));+#9312 = VECTOR('',#9313,1.);+#9313 = DIRECTION('',(-0.,-0.,-1.));+#9314 = PCURVE('',#4845,#9315);+#9315 = DEFINITIONAL_REPRESENTATION('',(#9316),#9320);+#9316 = LINE('',#9317,#9318);+#9317 = CARTESIAN_POINT('',(1.,0.));+#9318 = VECTOR('',#9319,1.);+#9319 = DIRECTION('',(0.,-1.));+#9320 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9321 = PCURVE('',#4809,#9322);+#9322 = DEFINITIONAL_REPRESENTATION('',(#9323),#9327);+#9323 = LINE('',#9324,#9325);+#9324 = CARTESIAN_POINT('',(0.,0.));+#9325 = VECTOR('',#9326,1.);+#9326 = DIRECTION('',(0.,-1.));+#9327 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9328 = ADVANCED_FACE('',(#9329),#4809,.T.);+#9329 = FACE_BOUND('',#9330,.T.);+#9330 = EDGE_LOOP('',(#9331,#9332,#9333,#9334));+#9331 = ORIENTED_EDGE('',*,*,#4789,.T.);+#9332 = ORIENTED_EDGE('',*,*,#9308,.T.);+#9333 = ORIENTED_EDGE('',*,*,#8882,.T.);+#9334 = ORIENTED_EDGE('',*,*,#9335,.F.);+#9335 = EDGE_CURVE('',#4745,#8883,#9336,.T.);+#9336 = SURFACE_CURVE('',#9337,(#9341,#9348),.PCURVE_S1.);+#9337 = LINE('',#9338,#9339);+#9338 = CARTESIAN_POINT('',(-0.13156879243,5.475467708923E-02,1.8000001)+ );+#9339 = VECTOR('',#9340,1.);+#9340 = DIRECTION('',(-0.,-0.,-1.));+#9341 = PCURVE('',#4809,#9342);+#9342 = DEFINITIONAL_REPRESENTATION('',(#9343),#9347);+#9343 = LINE('',#9344,#9345);+#9344 = CARTESIAN_POINT('',(1.,0.));+#9345 = VECTOR('',#9346,1.);+#9346 = DIRECTION('',(0.,-1.));+#9347 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9348 = PCURVE('',#4770,#9349);+#9349 = DEFINITIONAL_REPRESENTATION('',(#9350),#9354);+#9350 = LINE('',#9351,#9352);+#9351 = CARTESIAN_POINT('',(0.,0.));+#9352 = VECTOR('',#9353,1.);+#9353 = DIRECTION('',(0.,-1.));+#9354 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9355 = ADVANCED_FACE('',(#9356),#4770,.T.);+#9356 = FACE_BOUND('',#9357,.T.);+#9357 = EDGE_LOOP('',(#9358,#9359,#9360,#9361));+#9358 = ORIENTED_EDGE('',*,*,#4744,.T.);+#9359 = ORIENTED_EDGE('',*,*,#9335,.T.);+#9360 = ORIENTED_EDGE('',*,*,#8905,.T.);+#9361 = ORIENTED_EDGE('',*,*,#9362,.F.);+#9362 = EDGE_CURVE('',#4700,#8906,#9363,.T.);+#9363 = SURFACE_CURVE('',#9364,(#9368,#9375),.PCURVE_S1.);+#9364 = LINE('',#9365,#9366);+#9365 = CARTESIAN_POINT('',(-5.908778103154E-02,2.777125708482E-02,+ 1.8000001));+#9366 = VECTOR('',#9367,1.);+#9367 = DIRECTION('',(-0.,-0.,-1.));+#9368 = PCURVE('',#4770,#9369);+#9369 = DEFINITIONAL_REPRESENTATION('',(#9370),#9374);+#9370 = LINE('',#9371,#9372);+#9371 = CARTESIAN_POINT('',(1.,0.));+#9372 = VECTOR('',#9373,1.);+#9373 = DIRECTION('',(0.,-1.));+#9374 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9375 = PCURVE('',#4725,#9376);+#9376 = DEFINITIONAL_REPRESENTATION('',(#9377),#9381);+#9377 = LINE('',#9378,#9379);+#9378 = CARTESIAN_POINT('',(0.,0.));+#9379 = VECTOR('',#9380,1.);+#9380 = DIRECTION('',(0.,-1.));+#9381 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9382 = ADVANCED_FACE('',(#9383),#4725,.T.);+#9383 = FACE_BOUND('',#9384,.T.);+#9384 = EDGE_LOOP('',(#9385,#9386,#9387,#9388));+#9385 = ORIENTED_EDGE('',*,*,#4699,.T.);+#9386 = ORIENTED_EDGE('',*,*,#9362,.T.);+#9387 = ORIENTED_EDGE('',*,*,#8928,.T.);+#9388 = ORIENTED_EDGE('',*,*,#9389,.F.);+#9389 = EDGE_CURVE('',#4655,#8929,#9390,.T.);+#9390 = SURFACE_CURVE('',#9391,(#9395,#9402),.PCURVE_S1.);+#9391 = LINE('',#9392,#9393);+#9392 = CARTESIAN_POINT('',(-3.230132029724E-02,-4.530063212418E-02,+ 1.8000001));+#9393 = VECTOR('',#9394,1.);+#9394 = DIRECTION('',(-0.,-0.,-1.));+#9395 = PCURVE('',#4725,#9396);+#9396 = DEFINITIONAL_REPRESENTATION('',(#9397),#9401);+#9397 = LINE('',#9398,#9399);+#9398 = CARTESIAN_POINT('',(1.,0.));+#9399 = VECTOR('',#9400,1.);+#9400 = DIRECTION('',(0.,-1.));+#9401 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9402 = PCURVE('',#4680,#9403);+#9403 = DEFINITIONAL_REPRESENTATION('',(#9404),#9408);+#9404 = LINE('',#9405,#9406);+#9405 = CARTESIAN_POINT('',(0.,0.));+#9406 = VECTOR('',#9407,1.);+#9407 = DIRECTION('',(0.,-1.));+#9408 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9409 = ADVANCED_FACE('',(#9410),#4680,.T.);+#9410 = FACE_BOUND('',#9411,.T.);+#9411 = EDGE_LOOP('',(#9412,#9413,#9414,#9415));+#9412 = ORIENTED_EDGE('',*,*,#4654,.T.);+#9413 = ORIENTED_EDGE('',*,*,#9389,.T.);+#9414 = ORIENTED_EDGE('',*,*,#8951,.T.);+#9415 = ORIENTED_EDGE('',*,*,#9416,.F.);+#9416 = EDGE_CURVE('',#4619,#8952,#9417,.T.);+#9417 = SURFACE_CURVE('',#9418,(#9422,#9429),.PCURVE_S1.);+#9418 = LINE('',#9419,#9420);+#9419 = CARTESIAN_POINT('',(-6.036801628722E-02,-0.118569480603,+ 1.8000001));+#9420 = VECTOR('',#9421,1.);+#9421 = DIRECTION('',(-0.,-0.,-1.));+#9422 = PCURVE('',#4680,#9423);+#9423 = DEFINITIONAL_REPRESENTATION('',(#9424),#9428);+#9424 = LINE('',#9425,#9426);+#9425 = CARTESIAN_POINT('',(1.,0.));+#9426 = VECTOR('',#9427,1.);+#9427 = DIRECTION('',(0.,-1.));+#9428 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9429 = PCURVE('',#4638,#9430);+#9430 = DEFINITIONAL_REPRESENTATION('',(#9431),#9435);+#9431 = LINE('',#9432,#9433);+#9432 = CARTESIAN_POINT('',(0.,0.));+#9433 = VECTOR('',#9434,1.);+#9434 = DIRECTION('',(0.,-1.));+#9435 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9436 = ADVANCED_FACE('',(#9437),#4638,.T.);+#9437 = FACE_BOUND('',#9438,.T.);+#9438 = EDGE_LOOP('',(#9439,#9440,#9441,#9442));+#9439 = ORIENTED_EDGE('',*,*,#4618,.T.);+#9440 = ORIENTED_EDGE('',*,*,#9416,.T.);+#9441 = ORIENTED_EDGE('',*,*,#8974,.T.);+#9442 = ORIENTED_EDGE('',*,*,#9443,.F.);+#9443 = EDGE_CURVE('',#4583,#8975,#9444,.T.);+#9444 = SURFACE_CURVE('',#9445,(#9449,#9456),.PCURVE_S1.);+#9445 = LINE('',#9446,#9447);+#9446 = CARTESIAN_POINT('',(-0.137083651993,-0.145355941338,1.8000001));+#9447 = VECTOR('',#9448,1.);+#9448 = DIRECTION('',(-0.,-0.,-1.));+#9449 = PCURVE('',#4638,#9450);+#9450 = DEFINITIONAL_REPRESENTATION('',(#9451),#9455);+#9451 = LINE('',#9452,#9453);+#9452 = CARTESIAN_POINT('',(1.,0.));+#9453 = VECTOR('',#9454,1.);+#9454 = DIRECTION('',(0.,-1.));+#9455 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9456 = PCURVE('',#4602,#9457);+#9457 = DEFINITIONAL_REPRESENTATION('',(#9458),#9462);+#9458 = LINE('',#9459,#9460);+#9459 = CARTESIAN_POINT('',(0.,0.));+#9460 = VECTOR('',#9461,1.);+#9461 = DIRECTION('',(0.,-1.));+#9462 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9463 = ADVANCED_FACE('',(#9464),#4602,.T.);+#9464 = FACE_BOUND('',#9465,.T.);+#9465 = EDGE_LOOP('',(#9466,#9467,#9468,#9469));+#9466 = ORIENTED_EDGE('',*,*,#4582,.T.);+#9467 = ORIENTED_EDGE('',*,*,#9443,.T.);+#9468 = ORIENTED_EDGE('',*,*,#8997,.T.);+#9469 = ORIENTED_EDGE('',*,*,#9470,.F.);+#9470 = EDGE_CURVE('',#4547,#8998,#9471,.T.);+#9471 = SURFACE_CURVE('',#9472,(#9476,#9483),.PCURVE_S1.);+#9472 = LINE('',#9473,#9474);+#9473 = CARTESIAN_POINT('',(-0.179922293241,-0.142204593016,1.8000001));+#9474 = VECTOR('',#9475,1.);+#9475 = DIRECTION('',(-0.,-0.,-1.));+#9476 = PCURVE('',#4602,#9477);+#9477 = DEFINITIONAL_REPRESENTATION('',(#9478),#9482);+#9478 = LINE('',#9479,#9480);+#9479 = CARTESIAN_POINT('',(1.,0.));+#9480 = VECTOR('',#9481,1.);+#9481 = DIRECTION('',(0.,-1.));+#9482 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9483 = PCURVE('',#4566,#9484);+#9484 = DEFINITIONAL_REPRESENTATION('',(#9485),#9489);+#9485 = LINE('',#9486,#9487);+#9486 = CARTESIAN_POINT('',(0.,0.));+#9487 = VECTOR('',#9488,1.);+#9488 = DIRECTION('',(0.,-1.));+#9489 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9490 = ADVANCED_FACE('',(#9491),#4566,.T.);+#9491 = FACE_BOUND('',#9492,.T.);+#9492 = EDGE_LOOP('',(#9493,#9494,#9495,#9496));+#9493 = ORIENTED_EDGE('',*,*,#4546,.T.);+#9494 = ORIENTED_EDGE('',*,*,#9470,.T.);+#9495 = ORIENTED_EDGE('',*,*,#9020,.T.);+#9496 = ORIENTED_EDGE('',*,*,#9497,.F.);+#9497 = EDGE_CURVE('',#4520,#9021,#9498,.T.);+#9498 = SURFACE_CURVE('',#9499,(#9503,#9510),.PCURVE_S1.);+#9499 = LINE('',#9500,#9501);+#9500 = CARTESIAN_POINT('',(-0.214685604415,-0.132750548051,1.8000001));+#9501 = VECTOR('',#9502,1.);+#9502 = DIRECTION('',(-0.,-0.,-1.));+#9503 = PCURVE('',#4566,#9504);+#9504 = DEFINITIONAL_REPRESENTATION('',(#9505),#9509);+#9505 = LINE('',#9506,#9507);+#9506 = CARTESIAN_POINT('',(1.,0.));+#9507 = VECTOR('',#9508,1.);+#9508 = DIRECTION('',(0.,-1.));+#9509 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9510 = PCURVE('',#4535,#9511);+#9511 = DEFINITIONAL_REPRESENTATION('',(#9512),#9516);+#9512 = LINE('',#9513,#9514);+#9513 = CARTESIAN_POINT('',(0.,0.));+#9514 = VECTOR('',#9515,1.);+#9515 = DIRECTION('',(0.,-1.));+#9516 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9517 = ADVANCED_FACE('',(#9518),#4535,.T.);+#9518 = FACE_BOUND('',#9519,.T.);+#9519 = EDGE_LOOP('',(#9520,#9521,#9522,#9523));+#9520 = ORIENTED_EDGE('',*,*,#4519,.T.);+#9521 = ORIENTED_EDGE('',*,*,#9497,.T.);+#9522 = ORIENTED_EDGE('',*,*,#9043,.T.);+#9523 = ORIENTED_EDGE('',*,*,#9524,.F.);+#9524 = EDGE_CURVE('',#4484,#9044,#9525,.T.);+#9525 = SURFACE_CURVE('',#9526,(#9530,#9537),.PCURVE_S1.);+#9526 = LINE('',#9527,#9528);+#9527 = CARTESIAN_POINT('',(-0.214685604415,-9.237389767931E-02,+ 1.8000001));+#9528 = VECTOR('',#9529,1.);+#9529 = DIRECTION('',(-0.,-0.,-1.));+#9530 = PCURVE('',#4535,#9531);+#9531 = DEFINITIONAL_REPRESENTATION('',(#9532),#9536);+#9532 = LINE('',#9533,#9534);+#9533 = CARTESIAN_POINT('',(4.037665037155E-02,0.));+#9534 = VECTOR('',#9535,1.);+#9535 = DIRECTION('',(0.,-1.));+#9536 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9537 = PCURVE('',#4503,#9538);+#9538 = DEFINITIONAL_REPRESENTATION('',(#9539),#9543);+#9539 = LINE('',#9540,#9541);+#9540 = CARTESIAN_POINT('',(0.,0.));+#9541 = VECTOR('',#9542,1.);+#9542 = DIRECTION('',(0.,-1.));+#9543 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9544 = ADVANCED_FACE('',(#9545),#4503,.T.);+#9545 = FACE_BOUND('',#9546,.T.);+#9546 = EDGE_LOOP('',(#9547,#9548,#9549,#9550));+#9547 = ORIENTED_EDGE('',*,*,#4483,.T.);+#9548 = ORIENTED_EDGE('',*,*,#9524,.T.);+#9549 = ORIENTED_EDGE('',*,*,#9066,.T.);+#9550 = ORIENTED_EDGE('',*,*,#9551,.F.);+#9551 = EDGE_CURVE('',#4448,#9067,#9552,.T.);+#9552 = SURFACE_CURVE('',#9553,(#9557,#9564),.PCURVE_S1.);+#9553 = LINE('',#9554,#9555);+#9554 = CARTESIAN_POINT('',(-0.178248139445,-0.107047363302,1.8000001));+#9555 = VECTOR('',#9556,1.);+#9556 = DIRECTION('',(-0.,-0.,-1.));+#9557 = PCURVE('',#4503,#9558);+#9558 = DEFINITIONAL_REPRESENTATION('',(#9559),#9563);+#9559 = LINE('',#9560,#9561);+#9560 = CARTESIAN_POINT('',(1.,0.));+#9561 = VECTOR('',#9562,1.);+#9562 = DIRECTION('',(0.,-1.));+#9563 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9564 = PCURVE('',#4467,#9565);+#9565 = DEFINITIONAL_REPRESENTATION('',(#9566),#9570);+#9566 = LINE('',#9567,#9568);+#9567 = CARTESIAN_POINT('',(0.,0.));+#9568 = VECTOR('',#9569,1.);+#9569 = DIRECTION('',(0.,-1.));+#9570 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9571 = ADVANCED_FACE('',(#9572),#4467,.T.);+#9572 = FACE_BOUND('',#9573,.T.);+#9573 = EDGE_LOOP('',(#9574,#9575,#9576,#9577));+#9574 = ORIENTED_EDGE('',*,*,#4447,.T.);+#9575 = ORIENTED_EDGE('',*,*,#9551,.T.);+#9576 = ORIENTED_EDGE('',*,*,#9089,.T.);+#9577 = ORIENTED_EDGE('',*,*,#9578,.F.);+#9578 = EDGE_CURVE('',#4412,#9090,#9579,.T.);+#9579 = SURFACE_CURVE('',#9580,(#9584,#9591),.PCURVE_S1.);+#9580 = LINE('',#9581,#9582);+#9581 = CARTESIAN_POINT('',(-0.140825878125,-0.11187286542,1.8000001));+#9582 = VECTOR('',#9583,1.);+#9583 = DIRECTION('',(-0.,-0.,-1.));+#9584 = PCURVE('',#4467,#9585);+#9585 = DEFINITIONAL_REPRESENTATION('',(#9586),#9590);+#9586 = LINE('',#9587,#9588);+#9587 = CARTESIAN_POINT('',(1.,0.));+#9588 = VECTOR('',#9589,1.);+#9589 = DIRECTION('',(0.,-1.));+#9590 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9591 = PCURVE('',#4431,#9592);+#9592 = DEFINITIONAL_REPRESENTATION('',(#9593),#9597);+#9593 = LINE('',#9594,#9595);+#9594 = CARTESIAN_POINT('',(0.,0.));+#9595 = VECTOR('',#9596,1.);+#9596 = DIRECTION('',(0.,-1.));+#9597 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9598 = ADVANCED_FACE('',(#9599),#4431,.T.);+#9599 = FACE_BOUND('',#9600,.T.);+#9600 = EDGE_LOOP('',(#9601,#9602,#9603,#9604));+#9601 = ORIENTED_EDGE('',*,*,#4411,.T.);+#9602 = ORIENTED_EDGE('',*,*,#9578,.T.);+#9603 = ORIENTED_EDGE('',*,*,#9112,.T.);+#9604 = ORIENTED_EDGE('',*,*,#9605,.F.);+#9605 = EDGE_CURVE('',#4376,#9113,#9606,.T.);+#9606 = SURFACE_CURVE('',#9607,(#9611,#9618),.PCURVE_S1.);+#9607 = LINE('',#9608,#9609);+#9608 = CARTESIAN_POINT('',(-9.01088660731E-02,-9.454044965046E-02,+ 1.8000001));+#9609 = VECTOR('',#9610,1.);+#9610 = DIRECTION('',(-0.,-0.,-1.));+#9611 = PCURVE('',#4431,#9612);+#9612 = DEFINITIONAL_REPRESENTATION('',(#9613),#9617);+#9613 = LINE('',#9614,#9615);+#9614 = CARTESIAN_POINT('',(1.,0.));+#9615 = VECTOR('',#9616,1.);+#9616 = DIRECTION('',(0.,-1.));+#9617 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9618 = PCURVE('',#4395,#9619);+#9619 = DEFINITIONAL_REPRESENTATION('',(#9620),#9624);+#9620 = LINE('',#9621,#9622);+#9621 = CARTESIAN_POINT('',(0.,0.));+#9622 = VECTOR('',#9623,1.);+#9623 = DIRECTION('',(0.,-1.));+#9624 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9625 = ADVANCED_FACE('',(#9626),#4395,.T.);+#9626 = FACE_BOUND('',#9627,.T.);+#9627 = EDGE_LOOP('',(#9628,#9629,#9630,#9631));+#9628 = ORIENTED_EDGE('',*,*,#4375,.T.);+#9629 = ORIENTED_EDGE('',*,*,#9605,.T.);+#9630 = ORIENTED_EDGE('',*,*,#9135,.T.);+#9631 = ORIENTED_EDGE('',*,*,#9632,.F.);+#9632 = EDGE_CURVE('',#4331,#9136,#9633,.T.);+#9633 = SURFACE_CURVE('',#9634,(#9638,#9645),.PCURVE_S1.);+#9634 = LINE('',#9635,#9636);+#9635 = CARTESIAN_POINT('',(-7.228405212858E-02,-4.530063212418E-02,+ 1.8000001));+#9636 = VECTOR('',#9637,1.);+#9637 = DIRECTION('',(-0.,-0.,-1.));+#9638 = PCURVE('',#4395,#9639);+#9639 = DEFINITIONAL_REPRESENTATION('',(#9640),#9644);+#9640 = LINE('',#9641,#9642);+#9641 = CARTESIAN_POINT('',(1.,0.));+#9642 = VECTOR('',#9643,1.);+#9643 = DIRECTION('',(0.,-1.));+#9644 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9645 = PCURVE('',#4356,#9646);+#9646 = DEFINITIONAL_REPRESENTATION('',(#9647),#9651);+#9647 = LINE('',#9648,#9649);+#9648 = CARTESIAN_POINT('',(0.,0.));+#9649 = VECTOR('',#9650,1.);+#9650 = DIRECTION('',(0.,-1.));+#9651 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9652 = ADVANCED_FACE('',(#9653),#4356,.T.);+#9653 = FACE_BOUND('',#9654,.T.);+#9654 = EDGE_LOOP('',(#9655,#9656,#9657,#9658));+#9655 = ORIENTED_EDGE('',*,*,#4330,.T.);+#9656 = ORIENTED_EDGE('',*,*,#9632,.T.);+#9657 = ORIENTED_EDGE('',*,*,#9158,.T.);+#9658 = ORIENTED_EDGE('',*,*,#9659,.F.);+#9659 = EDGE_CURVE('',#4295,#9159,#9660,.T.);+#9660 = SURFACE_CURVE('',#9661,(#9665,#9672),.PCURVE_S1.);+#9661 = LINE('',#9662,#9663);+#9662 = CARTESIAN_POINT('',(-9.069974388341E-02,3.742226131998E-03,+ 1.8000001));+#9663 = VECTOR('',#9664,1.);+#9664 = DIRECTION('',(-0.,-0.,-1.));+#9665 = PCURVE('',#4356,#9666);+#9666 = DEFINITIONAL_REPRESENTATION('',(#9667),#9671);+#9667 = LINE('',#9668,#9669);+#9668 = CARTESIAN_POINT('',(1.,0.));+#9669 = VECTOR('',#9670,1.);+#9670 = DIRECTION('',(0.,-1.));+#9671 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9672 = PCURVE('',#4314,#9673);+#9673 = DEFINITIONAL_REPRESENTATION('',(#9674),#9678);+#9674 = LINE('',#9675,#9676);+#9675 = CARTESIAN_POINT('',(0.,0.));+#9676 = VECTOR('',#9677,1.);+#9677 = DIRECTION('',(0.,-1.));+#9678 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9679 = ADVANCED_FACE('',(#9680),#4314,.T.);+#9680 = FACE_BOUND('',#9681,.T.);+#9681 = EDGE_LOOP('',(#9682,#9683,#9684,#9685));+#9682 = ORIENTED_EDGE('',*,*,#4294,.T.);+#9683 = ORIENTED_EDGE('',*,*,#9659,.T.);+#9684 = ORIENTED_EDGE('',*,*,#9181,.T.);+#9685 = ORIENTED_EDGE('',*,*,#9686,.F.);+#9686 = EDGE_CURVE('',#4259,#9182,#9687,.T.);+#9687 = SURFACE_CURVE('',#9688,(#9692,#9699),.PCURVE_S1.);+#9688 = LINE('',#9689,#9690);+#9689 = CARTESIAN_POINT('',(-0.142007633746,2.127160117135E-02,1.8000001+ ));+#9690 = VECTOR('',#9691,1.);+#9691 = DIRECTION('',(-0.,-0.,-1.));+#9692 = PCURVE('',#4314,#9693);+#9693 = DEFINITIONAL_REPRESENTATION('',(#9694),#9698);+#9694 = LINE('',#9695,#9696);+#9695 = CARTESIAN_POINT('',(1.,0.));+#9696 = VECTOR('',#9697,1.);+#9697 = DIRECTION('',(0.,-1.));+#9698 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9699 = PCURVE('',#4278,#9700);+#9700 = DEFINITIONAL_REPRESENTATION('',(#9701),#9705);+#9701 = LINE('',#9702,#9703);+#9702 = CARTESIAN_POINT('',(0.,0.));+#9703 = VECTOR('',#9704,1.);+#9704 = DIRECTION('',(0.,-1.));+#9705 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9706 = ADVANCED_FACE('',(#9707),#4278,.T.);+#9707 = FACE_BOUND('',#9708,.T.);+#9708 = EDGE_LOOP('',(#9709,#9710,#9711,#9712));+#9709 = ORIENTED_EDGE('',*,*,#4258,.T.);+#9710 = ORIENTED_EDGE('',*,*,#9686,.T.);+#9711 = ORIENTED_EDGE('',*,*,#9204,.T.);+#9712 = ORIENTED_EDGE('',*,*,#9713,.F.);+#9713 = EDGE_CURVE('',#4223,#9205,#9714,.T.);+#9714 = SURFACE_CURVE('',#9715,(#9719,#9726),.PCURVE_S1.);+#9715 = LINE('',#9716,#9717);+#9716 = CARTESIAN_POINT('',(-0.173127198422,1.762785467441E-02,1.8000001+ ));+#9717 = VECTOR('',#9718,1.);+#9718 = DIRECTION('',(-0.,-0.,-1.));+#9719 = PCURVE('',#4278,#9720);+#9720 = DEFINITIONAL_REPRESENTATION('',(#9721),#9725);+#9721 = LINE('',#9722,#9723);+#9722 = CARTESIAN_POINT('',(1.,0.));+#9723 = VECTOR('',#9724,1.);+#9724 = DIRECTION('',(0.,-1.));+#9725 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9726 = PCURVE('',#4242,#9727);+#9727 = DEFINITIONAL_REPRESENTATION('',(#9728),#9732);+#9728 = LINE('',#9729,#9730);+#9729 = CARTESIAN_POINT('',(0.,0.));+#9730 = VECTOR('',#9731,1.);+#9731 = DIRECTION('',(0.,-1.));+#9732 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9733 = ADVANCED_FACE('',(#9734),#4242,.T.);+#9734 = FACE_BOUND('',#9735,.T.);+#9735 = EDGE_LOOP('',(#9736,#9737,#9738,#9739));+#9736 = ORIENTED_EDGE('',*,*,#4222,.T.);+#9737 = ORIENTED_EDGE('',*,*,#9713,.T.);+#9738 = ORIENTED_EDGE('',*,*,#9227,.T.);+#9739 = ORIENTED_EDGE('',*,*,#9740,.F.);+#9740 = EDGE_CURVE('',#4196,#8767,#9741,.T.);+#9741 = SURFACE_CURVE('',#9742,(#9746,#9753),.PCURVE_S1.);+#9742 = LINE('',#9743,#9744);+#9743 = CARTESIAN_POINT('',(-0.202080211128,6.696615183575E-03,1.8000001+ ));+#9744 = VECTOR('',#9745,1.);+#9745 = DIRECTION('',(-0.,-0.,-1.));+#9746 = PCURVE('',#4242,#9747);+#9747 = DEFINITIONAL_REPRESENTATION('',(#9748),#9752);+#9748 = LINE('',#9749,#9750);+#9749 = CARTESIAN_POINT('',(1.,0.));+#9750 = VECTOR('',#9751,1.);+#9751 = DIRECTION('',(0.,-1.));+#9752 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9753 = PCURVE('',#4211,#9754);+#9754 = DEFINITIONAL_REPRESENTATION('',(#9755),#9759);+#9755 = LINE('',#9756,#9757);+#9756 = CARTESIAN_POINT('',(0.,0.));+#9757 = VECTOR('',#9758,1.);+#9758 = DIRECTION('',(0.,-1.));+#9759 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9760 = ADVANCED_FACE('',(#9761),#4211,.T.);+#9761 = FACE_BOUND('',#9762,.T.);+#9762 = EDGE_LOOP('',(#9763,#9764,#9765,#9766));+#9763 = ORIENTED_EDGE('',*,*,#4195,.T.);+#9764 = ORIENTED_EDGE('',*,*,#9740,.T.);+#9765 = ORIENTED_EDGE('',*,*,#8766,.T.);+#9766 = ORIENTED_EDGE('',*,*,#9767,.F.);+#9767 = EDGE_CURVE('',#4169,#8769,#9768,.T.);+#9768 = SURFACE_CURVE('',#9769,(#9773,#9780),.PCURVE_S1.);+#9769 = LINE('',#9770,#9771);+#9770 = CARTESIAN_POINT('',(-0.202080211128,0.154416067762,1.8000001));+#9771 = VECTOR('',#9772,1.);+#9772 = DIRECTION('',(-0.,-0.,-1.));+#9773 = PCURVE('',#4211,#9774);+#9774 = DEFINITIONAL_REPRESENTATION('',(#9775),#9779);+#9775 = LINE('',#9776,#9777);+#9776 = CARTESIAN_POINT('',(0.147719452579,0.));+#9777 = VECTOR('',#9778,1.);+#9778 = DIRECTION('',(0.,-1.));+#9779 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9780 = PCURVE('',#4184,#9781);+#9781 = DEFINITIONAL_REPRESENTATION('',(#9782),#9786);+#9782 = LINE('',#9783,#9784);+#9783 = CARTESIAN_POINT('',(0.,0.));+#9784 = VECTOR('',#9785,1.);+#9785 = DIRECTION('',(0.,-1.));+#9786 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9787 = ADVANCED_FACE('',(#9788),#4184,.T.);+#9788 = FACE_BOUND('',#9789,.T.);+#9789 = EDGE_LOOP('',(#9790,#9791,#9792,#9793));+#9790 = ORIENTED_EDGE('',*,*,#4166,.T.);+#9791 = ORIENTED_EDGE('',*,*,#9767,.T.);+#9792 = ORIENTED_EDGE('',*,*,#8791,.T.);+#9793 = ORIENTED_EDGE('',*,*,#8691,.F.);+#9794 = ADVANCED_FACE('',(#9795),#4153,.T.);+#9795 = FACE_BOUND('',#9796,.T.);+#9796 = EDGE_LOOP('',(#9797,#9798,#9821,#9849));+#9797 = ORIENTED_EDGE('',*,*,#4139,.T.);+#9798 = ORIENTED_EDGE('',*,*,#9799,.T.);+#9799 = EDGE_CURVE('',#3868,#9800,#9802,.T.);+#9800 = VERTEX_POINT('',#9801);+#9801 = CARTESIAN_POINT('',(0.115024213741,-0.106161046587,1.7000001));+#9802 = SURFACE_CURVE('',#9803,(#9807,#9814),.PCURVE_S1.);+#9803 = LINE('',#9804,#9805);+#9804 = CARTESIAN_POINT('',(0.115024213741,-0.106161046587,1.8000001));+#9805 = VECTOR('',#9806,1.);+#9806 = DIRECTION('',(-0.,-0.,-1.));+#9807 = PCURVE('',#4153,#9808);+#9808 = DEFINITIONAL_REPRESENTATION('',(#9809),#9813);+#9809 = LINE('',#9810,#9811);+#9810 = CARTESIAN_POINT('',(0.,0.));+#9811 = VECTOR('',#9812,1.);+#9812 = DIRECTION('',(0.,-1.));+#9813 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9814 = PCURVE('',#3885,#9815);+#9815 = DEFINITIONAL_REPRESENTATION('',(#9816),#9820);+#9816 = LINE('',#9817,#9818);+#9817 = CARTESIAN_POINT('',(6.184521081301E-02,0.));+#9818 = VECTOR('',#9819,1.);+#9819 = DIRECTION('',(0.,-1.));+#9820 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9821 = ORIENTED_EDGE('',*,*,#9822,.T.);+#9822 = EDGE_CURVE('',#9800,#9823,#9825,.T.);+#9823 = VERTEX_POINT('',#9824);+#9824 = CARTESIAN_POINT('',(0.115024213741,0.118569480603,1.7000001));+#9825 = SURFACE_CURVE('',#9826,(#9830,#9837),.PCURVE_S1.);+#9826 = LINE('',#9827,#9828);+#9827 = CARTESIAN_POINT('',(0.115024213741,-0.106161046587,1.7000001));+#9828 = VECTOR('',#9829,1.);+#9829 = DIRECTION('',(0.,1.,0.));+#9830 = PCURVE('',#4153,#9831);+#9831 = DEFINITIONAL_REPRESENTATION('',(#9832),#9836);+#9832 = LINE('',#9833,#9834);+#9833 = CARTESIAN_POINT('',(0.,-0.1));+#9834 = VECTOR('',#9835,1.);+#9835 = DIRECTION('',(1.,0.));+#9836 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9837 = PCURVE('',#9838,#9843);+#9838 = PLANE('',#9839);+#9839 = AXIS2_PLACEMENT_3D('',#9840,#9841,#9842);+#9840 = CARTESIAN_POINT('',(0.,-0.139644122505,1.7000001));+#9841 = DIRECTION('',(0.,0.,1.));+#9842 = DIRECTION('',(1.,0.,0.));+#9843 = DEFINITIONAL_REPRESENTATION('',(#9844),#9848);+#9844 = LINE('',#9845,#9846);+#9845 = CARTESIAN_POINT('',(0.115024213741,3.348307591787E-02));+#9846 = VECTOR('',#9847,1.);+#9847 = DIRECTION('',(0.,1.));+#9848 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9849 = ORIENTED_EDGE('',*,*,#9850,.F.);+#9850 = EDGE_CURVE('',#4113,#9823,#9851,.T.);+#9851 = SURFACE_CURVE('',#9852,(#9856,#9863),.PCURVE_S1.);+#9852 = LINE('',#9853,#9854);+#9853 = CARTESIAN_POINT('',(0.115024213741,0.118569480603,1.8000001));+#9854 = VECTOR('',#9855,1.);+#9855 = DIRECTION('',(-0.,-0.,-1.));+#9856 = PCURVE('',#4153,#9857);+#9857 = DEFINITIONAL_REPRESENTATION('',(#9858),#9862);+#9858 = LINE('',#9859,#9860);+#9859 = CARTESIAN_POINT('',(0.22473052719,0.));+#9860 = VECTOR('',#9861,1.);+#9861 = DIRECTION('',(0.,-1.));+#9862 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9863 = PCURVE('',#4128,#9864);+#9864 = DEFINITIONAL_REPRESENTATION('',(#9865),#9869);+#9865 = LINE('',#9866,#9867);+#9866 = CARTESIAN_POINT('',(0.,0.));+#9867 = VECTOR('',#9868,1.);+#9868 = DIRECTION('',(0.,-1.));+#9869 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9870 = ADVANCED_FACE('',(#9871),#9838,.T.);+#9871 = FACE_BOUND('',#9872,.F.);+#9872 = EDGE_LOOP('',(#9873,#9898,#9919,#9920,#9943,#9966,#9989,#10012,+ #10035,#10058,#10081));+#9873 = ORIENTED_EDGE('',*,*,#9874,.T.);+#9874 = EDGE_CURVE('',#9875,#9877,#9879,.T.);+#9875 = VERTEX_POINT('',#9876);+#9876 = CARTESIAN_POINT('',(5.317900292839E-02,-0.139644122505,1.7000001+ ));+#9877 = VERTEX_POINT('',#9878);+#9878 = CARTESIAN_POINT('',(5.317900292839E-02,-0.106161046587,1.7000001+ ));+#9879 = SURFACE_CURVE('',#9880,(#9884,#9891),.PCURVE_S1.);+#9880 = LINE('',#9881,#9882);+#9881 = CARTESIAN_POINT('',(5.317900292839E-02,-0.139644122505,1.7000001+ ));+#9882 = VECTOR('',#9883,1.);+#9883 = DIRECTION('',(0.,1.,0.));+#9884 = PCURVE('',#9838,#9885);+#9885 = DEFINITIONAL_REPRESENTATION('',(#9886),#9890);+#9886 = LINE('',#9887,#9888);+#9887 = CARTESIAN_POINT('',(5.317900292839E-02,0.));+#9888 = VECTOR('',#9889,1.);+#9889 = DIRECTION('',(0.,1.));+#9890 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9891 = PCURVE('',#3912,#9892);+#9892 = DEFINITIONAL_REPRESENTATION('',(#9893),#9897);+#9893 = LINE('',#9894,#9895);+#9894 = CARTESIAN_POINT('',(0.,-0.1));+#9895 = VECTOR('',#9896,1.);+#9896 = DIRECTION('',(1.,0.));+#9897 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9898 = ORIENTED_EDGE('',*,*,#9899,.T.);+#9899 = EDGE_CURVE('',#9877,#9800,#9900,.T.);+#9900 = SURFACE_CURVE('',#9901,(#9905,#9912),.PCURVE_S1.);+#9901 = LINE('',#9902,#9903);+#9902 = CARTESIAN_POINT('',(5.317900292839E-02,-0.106161046587,1.7000001+ ));+#9903 = VECTOR('',#9904,1.);+#9904 = DIRECTION('',(1.,0.,0.));+#9905 = PCURVE('',#9838,#9906);+#9906 = DEFINITIONAL_REPRESENTATION('',(#9907),#9911);+#9907 = LINE('',#9908,#9909);+#9908 = CARTESIAN_POINT('',(5.317900292839E-02,3.348307591787E-02));+#9909 = VECTOR('',#9910,1.);+#9910 = DIRECTION('',(1.,0.));+#9911 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9912 = PCURVE('',#3885,#9913);+#9913 = DEFINITIONAL_REPRESENTATION('',(#9914),#9918);+#9914 = LINE('',#9915,#9916);+#9915 = CARTESIAN_POINT('',(0.,-0.1));+#9916 = VECTOR('',#9917,1.);+#9917 = DIRECTION('',(1.,0.));+#9918 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9919 = ORIENTED_EDGE('',*,*,#9822,.T.);+#9920 = ORIENTED_EDGE('',*,*,#9921,.T.);+#9921 = EDGE_CURVE('',#9823,#9922,#9924,.T.);+#9922 = VERTEX_POINT('',#9923);+#9923 = CARTESIAN_POINT('',(4.845198044586E-02,0.103600576075,1.7000001)+ );+#9924 = SURFACE_CURVE('',#9925,(#9929,#9936),.PCURVE_S1.);+#9925 = LINE('',#9926,#9927);+#9926 = CARTESIAN_POINT('',(0.115024213741,0.118569480603,1.7000001));+#9927 = VECTOR('',#9928,1.);+#9928 = DIRECTION('',(-0.97564065493,-0.219374821819,0.));+#9929 = PCURVE('',#9838,#9930);+#9930 = DEFINITIONAL_REPRESENTATION('',(#9931),#9935);+#9931 = LINE('',#9932,#9933);+#9932 = CARTESIAN_POINT('',(0.115024213741,0.258213603108));+#9933 = VECTOR('',#9934,1.);+#9934 = DIRECTION('',(-0.97564065493,-0.219374821819));+#9935 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9936 = PCURVE('',#4128,#9937);+#9937 = DEFINITIONAL_REPRESENTATION('',(#9938),#9942);+#9938 = LINE('',#9939,#9940);+#9939 = CARTESIAN_POINT('',(-0.,-0.1));+#9940 = VECTOR('',#9941,1.);+#9941 = DIRECTION('',(1.,0.));+#9942 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9943 = ORIENTED_EDGE('',*,*,#9944,.T.);+#9944 = EDGE_CURVE('',#9922,#9945,#9947,.T.);+#9945 = VERTEX_POINT('',#9946);+#9946 = CARTESIAN_POINT('',(4.845198044586E-02,0.139841081775,1.7000001)+ );+#9947 = SURFACE_CURVE('',#9948,(#9952,#9959),.PCURVE_S1.);+#9948 = LINE('',#9949,#9950);+#9949 = CARTESIAN_POINT('',(4.845198044586E-02,0.103600576075,1.7000001)+ );+#9950 = VECTOR('',#9951,1.);+#9951 = DIRECTION('',(0.,1.,0.));+#9952 = PCURVE('',#9838,#9953);+#9953 = DEFINITIONAL_REPRESENTATION('',(#9954),#9958);+#9954 = LINE('',#9955,#9956);+#9955 = CARTESIAN_POINT('',(4.845198044586E-02,0.24324469858));+#9956 = VECTOR('',#9957,1.);+#9957 = DIRECTION('',(0.,1.));+#9958 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9959 = PCURVE('',#4101,#9960);+#9960 = DEFINITIONAL_REPRESENTATION('',(#9961),#9965);+#9961 = LINE('',#9962,#9963);+#9962 = CARTESIAN_POINT('',(0.,-0.1));+#9963 = VECTOR('',#9964,1.);+#9964 = DIRECTION('',(1.,0.));+#9965 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9966 = ORIENTED_EDGE('',*,*,#9967,.T.);+#9967 = EDGE_CURVE('',#9945,#9968,#9970,.T.);+#9968 = VERTEX_POINT('',#9969);+#9969 = CARTESIAN_POINT('',(0.114630295201,0.154416067762,1.7000001));+#9970 = SURFACE_CURVE('',#9971,(#9975,#9982),.PCURVE_S1.);+#9971 = LINE('',#9972,#9973);+#9972 = CARTESIAN_POINT('',(4.845198044586E-02,0.139841081775,1.7000001)+ );+#9973 = VECTOR('',#9974,1.);+#9974 = DIRECTION('',(0.976595648113,0.215083565358,0.));+#9975 = PCURVE('',#9838,#9976);+#9976 = DEFINITIONAL_REPRESENTATION('',(#9977),#9981);+#9977 = LINE('',#9978,#9979);+#9978 = CARTESIAN_POINT('',(4.845198044586E-02,0.279485204279));+#9979 = VECTOR('',#9980,1.);+#9980 = DIRECTION('',(0.976595648113,0.215083565358));+#9981 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9982 = PCURVE('',#4074,#9983);+#9983 = DEFINITIONAL_REPRESENTATION('',(#9984),#9988);+#9984 = LINE('',#9985,#9986);+#9985 = CARTESIAN_POINT('',(0.,-0.1));+#9986 = VECTOR('',#9987,1.);+#9987 = DIRECTION('',(1.,0.));+#9988 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9989 = ORIENTED_EDGE('',*,*,#9990,.T.);+#9990 = EDGE_CURVE('',#9968,#9991,#9993,.T.);+#9991 = VERTEX_POINT('',#9992);+#9992 = CARTESIAN_POINT('',(0.154416067762,0.154416067762,1.7000001));+#9993 = SURFACE_CURVE('',#9994,(#9998,#10005),.PCURVE_S1.);+#9994 = LINE('',#9995,#9996);+#9995 = CARTESIAN_POINT('',(0.114630295201,0.154416067762,1.7000001));+#9996 = VECTOR('',#9997,1.);+#9997 = DIRECTION('',(1.,0.,0.));+#9998 = PCURVE('',#9838,#9999);+#9999 = DEFINITIONAL_REPRESENTATION('',(#10000),#10004);+#10000 = LINE('',#10001,#10002);+#10001 = CARTESIAN_POINT('',(0.114630295201,0.294060190267));+#10002 = VECTOR('',#10003,1.);+#10003 = DIRECTION('',(1.,0.));+#10004 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10005 = PCURVE('',#4047,#10006);+#10006 = DEFINITIONAL_REPRESENTATION('',(#10007),#10011);+#10007 = LINE('',#10008,#10009);+#10008 = CARTESIAN_POINT('',(0.,-0.1));+#10009 = VECTOR('',#10010,1.);+#10010 = DIRECTION('',(1.,0.));+#10011 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10012 = ORIENTED_EDGE('',*,*,#10013,.T.);+#10013 = EDGE_CURVE('',#9991,#10014,#10016,.T.);+#10014 = VERTEX_POINT('',#10015);+#10015 = CARTESIAN_POINT('',(0.154416067762,-0.106161046587,1.7000001));+#10016 = SURFACE_CURVE('',#10017,(#10021,#10028),.PCURVE_S1.);+#10017 = LINE('',#10018,#10019);+#10018 = CARTESIAN_POINT('',(0.154416067762,0.154416067762,1.7000001));+#10019 = VECTOR('',#10020,1.);+#10020 = DIRECTION('',(0.,-1.,0.));+#10021 = PCURVE('',#9838,#10022);+#10022 = DEFINITIONAL_REPRESENTATION('',(#10023),#10027);+#10023 = LINE('',#10024,#10025);+#10024 = CARTESIAN_POINT('',(0.154416067762,0.294060190267));+#10025 = VECTOR('',#10026,1.);+#10026 = DIRECTION('',(0.,-1.));+#10027 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10028 = PCURVE('',#4020,#10029);+#10029 = DEFINITIONAL_REPRESENTATION('',(#10030),#10034);+#10030 = LINE('',#10031,#10032);+#10031 = CARTESIAN_POINT('',(0.,-0.1));+#10032 = VECTOR('',#10033,1.);+#10033 = DIRECTION('',(1.,0.));+#10034 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10035 = ORIENTED_EDGE('',*,*,#10036,.T.);+#10036 = EDGE_CURVE('',#10014,#10037,#10039,.T.);+#10037 = VERTEX_POINT('',#10038);+#10038 = CARTESIAN_POINT('',(0.215473441495,-0.106161046587,1.7000001));+#10039 = SURFACE_CURVE('',#10040,(#10044,#10051),.PCURVE_S1.);+#10040 = LINE('',#10041,#10042);+#10041 = CARTESIAN_POINT('',(0.154416067762,-0.106161046587,1.7000001));+#10042 = VECTOR('',#10043,1.);+#10043 = DIRECTION('',(1.,0.,0.));+#10044 = PCURVE('',#9838,#10045);+#10045 = DEFINITIONAL_REPRESENTATION('',(#10046),#10050);+#10046 = LINE('',#10047,#10048);+#10047 = CARTESIAN_POINT('',(0.154416067762,3.348307591787E-02));+#10048 = VECTOR('',#10049,1.);+#10049 = DIRECTION('',(1.,0.));+#10050 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10051 = PCURVE('',#3993,#10052);+#10052 = DEFINITIONAL_REPRESENTATION('',(#10053),#10057);+#10053 = LINE('',#10054,#10055);+#10054 = CARTESIAN_POINT('',(0.,-0.1));+#10055 = VECTOR('',#10056,1.);+#10056 = DIRECTION('',(1.,0.));+#10057 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10058 = ORIENTED_EDGE('',*,*,#10059,.T.);+#10059 = EDGE_CURVE('',#10037,#10060,#10062,.T.);+#10060 = VERTEX_POINT('',#10061);+#10061 = CARTESIAN_POINT('',(0.215473441495,-0.139644122505,1.7000001));+#10062 = SURFACE_CURVE('',#10063,(#10067,#10074),.PCURVE_S1.);+#10063 = LINE('',#10064,#10065);+#10064 = CARTESIAN_POINT('',(0.215473441495,-0.106161046587,1.7000001));+#10065 = VECTOR('',#10066,1.);+#10066 = DIRECTION('',(0.,-1.,0.));+#10067 = PCURVE('',#9838,#10068);+#10068 = DEFINITIONAL_REPRESENTATION('',(#10069),#10073);+#10069 = LINE('',#10070,#10071);+#10070 = CARTESIAN_POINT('',(0.215473441495,3.348307591787E-02));+#10071 = VECTOR('',#10072,1.);+#10072 = DIRECTION('',(0.,-1.));+#10073 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10074 = PCURVE('',#3966,#10075);+#10075 = DEFINITIONAL_REPRESENTATION('',(#10076),#10080);+#10076 = LINE('',#10077,#10078);+#10077 = CARTESIAN_POINT('',(0.,-0.1));+#10078 = VECTOR('',#10079,1.);+#10079 = DIRECTION('',(1.,0.));+#10080 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10081 = ORIENTED_EDGE('',*,*,#10082,.T.);+#10082 = EDGE_CURVE('',#10060,#9875,#10083,.T.);+#10083 = SURFACE_CURVE('',#10084,(#10088,#10095),.PCURVE_S1.);+#10084 = LINE('',#10085,#10086);+#10085 = CARTESIAN_POINT('',(0.215473441495,-0.139644122505,1.7000001));+#10086 = VECTOR('',#10087,1.);+#10087 = DIRECTION('',(-1.,0.,0.));+#10088 = PCURVE('',#9838,#10089);+#10089 = DEFINITIONAL_REPRESENTATION('',(#10090),#10094);+#10090 = LINE('',#10091,#10092);+#10091 = CARTESIAN_POINT('',(0.215473441495,0.));+#10092 = VECTOR('',#10093,1.);+#10093 = DIRECTION('',(-1.,0.));+#10094 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10095 = PCURVE('',#3939,#10096);+#10096 = DEFINITIONAL_REPRESENTATION('',(#10097),#10101);+#10097 = LINE('',#10098,#10099);+#10098 = CARTESIAN_POINT('',(0.,-0.1));+#10099 = VECTOR('',#10100,1.);+#10100 = DIRECTION('',(1.,0.));+#10101 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10102 = ADVANCED_FACE('',(#10103),#4128,.T.);+#10103 = FACE_BOUND('',#10104,.T.);+#10104 = EDGE_LOOP('',(#10105,#10106,#10107,#10108));+#10105 = ORIENTED_EDGE('',*,*,#4112,.T.);+#10106 = ORIENTED_EDGE('',*,*,#9850,.T.);+#10107 = ORIENTED_EDGE('',*,*,#9921,.T.);+#10108 = ORIENTED_EDGE('',*,*,#10109,.F.);+#10109 = EDGE_CURVE('',#4086,#9922,#10110,.T.);+#10110 = SURFACE_CURVE('',#10111,(#10115,#10122),.PCURVE_S1.);+#10111 = LINE('',#10112,#10113);+#10112 = CARTESIAN_POINT('',(4.845198044586E-02,0.103600576075,1.8000001+ ));+#10113 = VECTOR('',#10114,1.);+#10114 = DIRECTION('',(-0.,-0.,-1.));+#10115 = PCURVE('',#4128,#10116);+#10116 = DEFINITIONAL_REPRESENTATION('',(#10117),#10121);+#10117 = LINE('',#10118,#10119);+#10118 = CARTESIAN_POINT('',(6.823437805625E-02,0.));+#10119 = VECTOR('',#10120,1.);+#10120 = DIRECTION('',(0.,-1.));+#10121 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10122 = PCURVE('',#4101,#10123);+#10123 = DEFINITIONAL_REPRESENTATION('',(#10124),#10128);+#10124 = LINE('',#10125,#10126);+#10125 = CARTESIAN_POINT('',(0.,0.));+#10126 = VECTOR('',#10127,1.);+#10127 = DIRECTION('',(0.,-1.));+#10128 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10129 = ADVANCED_FACE('',(#10130),#4101,.T.);+#10130 = FACE_BOUND('',#10131,.T.);+#10131 = EDGE_LOOP('',(#10132,#10133,#10134,#10135));+#10132 = ORIENTED_EDGE('',*,*,#4085,.T.);+#10133 = ORIENTED_EDGE('',*,*,#10109,.T.);+#10134 = ORIENTED_EDGE('',*,*,#9944,.T.);+#10135 = ORIENTED_EDGE('',*,*,#10136,.F.);+#10136 = EDGE_CURVE('',#4059,#9945,#10137,.T.);+#10137 = SURFACE_CURVE('',#10138,(#10142,#10149),.PCURVE_S1.);+#10138 = LINE('',#10139,#10140);+#10139 = CARTESIAN_POINT('',(4.845198044586E-02,0.139841081775,1.8000001+ ));+#10140 = VECTOR('',#10141,1.);+#10141 = DIRECTION('',(-0.,-0.,-1.));+#10142 = PCURVE('',#4101,#10143);+#10143 = DEFINITIONAL_REPRESENTATION('',(#10144),#10148);+#10144 = LINE('',#10145,#10146);+#10145 = CARTESIAN_POINT('',(3.624050569934E-02,0.));+#10146 = VECTOR('',#10147,1.);+#10147 = DIRECTION('',(0.,-1.));+#10148 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10149 = PCURVE('',#4074,#10150);+#10150 = DEFINITIONAL_REPRESENTATION('',(#10151),#10155);+#10151 = LINE('',#10152,#10153);+#10152 = CARTESIAN_POINT('',(0.,0.));+#10153 = VECTOR('',#10154,1.);+#10154 = DIRECTION('',(0.,-1.));+#10155 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10156 = ADVANCED_FACE('',(#10157),#4074,.T.);+#10157 = FACE_BOUND('',#10158,.T.);+#10158 = EDGE_LOOP('',(#10159,#10160,#10161,#10162));+#10159 = ORIENTED_EDGE('',*,*,#4058,.T.);+#10160 = ORIENTED_EDGE('',*,*,#10136,.T.);+#10161 = ORIENTED_EDGE('',*,*,#9967,.T.);+#10162 = ORIENTED_EDGE('',*,*,#10163,.F.);+#10163 = EDGE_CURVE('',#4032,#9968,#10164,.T.);+#10164 = SURFACE_CURVE('',#10165,(#10169,#10176),.PCURVE_S1.);+#10165 = LINE('',#10166,#10167);+#10166 = CARTESIAN_POINT('',(0.114630295201,0.154416067762,1.8000001));+#10167 = VECTOR('',#10168,1.);+#10168 = DIRECTION('',(-0.,-0.,-1.));+#10169 = PCURVE('',#4074,#10170);+#10170 = DEFINITIONAL_REPRESENTATION('',(#10171),#10175);+#10171 = LINE('',#10172,#10173);+#10172 = CARTESIAN_POINT('',(6.776429414078E-02,0.));+#10173 = VECTOR('',#10174,1.);+#10174 = DIRECTION('',(0.,-1.));+#10175 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10176 = PCURVE('',#4047,#10177);+#10177 = DEFINITIONAL_REPRESENTATION('',(#10178),#10182);+#10178 = LINE('',#10179,#10180);+#10179 = CARTESIAN_POINT('',(0.,0.));+#10180 = VECTOR('',#10181,1.);+#10181 = DIRECTION('',(0.,-1.));+#10182 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10183 = ADVANCED_FACE('',(#10184),#4047,.T.);+#10184 = FACE_BOUND('',#10185,.T.);+#10185 = EDGE_LOOP('',(#10186,#10187,#10188,#10189));+#10186 = ORIENTED_EDGE('',*,*,#4031,.T.);+#10187 = ORIENTED_EDGE('',*,*,#10163,.T.);+#10188 = ORIENTED_EDGE('',*,*,#9990,.T.);+#10189 = ORIENTED_EDGE('',*,*,#10190,.F.);+#10190 = EDGE_CURVE('',#4005,#9991,#10191,.T.);+#10191 = SURFACE_CURVE('',#10192,(#10196,#10203),.PCURVE_S1.);+#10192 = LINE('',#10193,#10194);+#10193 = CARTESIAN_POINT('',(0.154416067762,0.154416067762,1.8000001));+#10194 = VECTOR('',#10195,1.);+#10195 = DIRECTION('',(-0.,-0.,-1.));+#10196 = PCURVE('',#4047,#10197);+#10197 = DEFINITIONAL_REPRESENTATION('',(#10198),#10202);+#10198 = LINE('',#10199,#10200);+#10199 = CARTESIAN_POINT('',(3.978577256124E-02,0.));+#10200 = VECTOR('',#10201,1.);+#10201 = DIRECTION('',(0.,-1.));+#10202 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10203 = PCURVE('',#4020,#10204);+#10204 = DEFINITIONAL_REPRESENTATION('',(#10205),#10209);+#10205 = LINE('',#10206,#10207);+#10206 = CARTESIAN_POINT('',(0.,0.));+#10207 = VECTOR('',#10208,1.);+#10208 = DIRECTION('',(0.,-1.));+#10209 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10210 = ADVANCED_FACE('',(#10211),#4020,.T.);+#10211 = FACE_BOUND('',#10212,.T.);+#10212 = EDGE_LOOP('',(#10213,#10214,#10215,#10216));+#10213 = ORIENTED_EDGE('',*,*,#4004,.T.);+#10214 = ORIENTED_EDGE('',*,*,#10190,.T.);+#10215 = ORIENTED_EDGE('',*,*,#10013,.T.);+#10216 = ORIENTED_EDGE('',*,*,#10217,.F.);+#10217 = EDGE_CURVE('',#3978,#10014,#10218,.T.);+#10218 = SURFACE_CURVE('',#10219,(#10223,#10230),.PCURVE_S1.);+#10219 = LINE('',#10220,#10221);+#10220 = CARTESIAN_POINT('',(0.154416067762,-0.106161046587,1.8000001));+#10221 = VECTOR('',#10222,1.);+#10222 = DIRECTION('',(-0.,-0.,-1.));+#10223 = PCURVE('',#4020,#10224);+#10224 = DEFINITIONAL_REPRESENTATION('',(#10225),#10229);+#10225 = LINE('',#10226,#10227);+#10226 = CARTESIAN_POINT('',(0.260577114349,0.));+#10227 = VECTOR('',#10228,1.);+#10228 = DIRECTION('',(0.,-1.));+#10229 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10230 = PCURVE('',#3993,#10231);+#10231 = DEFINITIONAL_REPRESENTATION('',(#10232),#10236);+#10232 = LINE('',#10233,#10234);+#10233 = CARTESIAN_POINT('',(0.,0.));+#10234 = VECTOR('',#10235,1.);+#10235 = DIRECTION('',(0.,-1.));+#10236 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10237 = ADVANCED_FACE('',(#10238),#3993,.T.);+#10238 = FACE_BOUND('',#10239,.T.);+#10239 = EDGE_LOOP('',(#10240,#10241,#10242,#10243));+#10240 = ORIENTED_EDGE('',*,*,#3977,.T.);+#10241 = ORIENTED_EDGE('',*,*,#10217,.T.);+#10242 = ORIENTED_EDGE('',*,*,#10036,.T.);+#10243 = ORIENTED_EDGE('',*,*,#10244,.F.);+#10244 = EDGE_CURVE('',#3951,#10037,#10245,.T.);+#10245 = SURFACE_CURVE('',#10246,(#10250,#10257),.PCURVE_S1.);+#10246 = LINE('',#10247,#10248);+#10247 = CARTESIAN_POINT('',(0.215473441495,-0.106161046587,1.8000001));+#10248 = VECTOR('',#10249,1.);+#10249 = DIRECTION('',(-0.,-0.,-1.));+#10250 = PCURVE('',#3993,#10251);+#10251 = DEFINITIONAL_REPRESENTATION('',(#10252),#10256);+#10252 = LINE('',#10253,#10254);+#10253 = CARTESIAN_POINT('',(6.105737373259E-02,0.));+#10254 = VECTOR('',#10255,1.);+#10255 = DIRECTION('',(0.,-1.));+#10256 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10257 = PCURVE('',#3966,#10258);+#10258 = DEFINITIONAL_REPRESENTATION('',(#10259),#10263);+#10259 = LINE('',#10260,#10261);+#10260 = CARTESIAN_POINT('',(0.,0.));+#10261 = VECTOR('',#10262,1.);+#10262 = DIRECTION('',(0.,-1.));+#10263 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10264 = ADVANCED_FACE('',(#10265),#3966,.T.);+#10265 = FACE_BOUND('',#10266,.T.);+#10266 = EDGE_LOOP('',(#10267,#10268,#10269,#10270));+#10267 = ORIENTED_EDGE('',*,*,#3950,.T.);+#10268 = ORIENTED_EDGE('',*,*,#10244,.T.);+#10269 = ORIENTED_EDGE('',*,*,#10059,.T.);+#10270 = ORIENTED_EDGE('',*,*,#10271,.F.);+#10271 = EDGE_CURVE('',#3924,#10060,#10272,.T.);+#10272 = SURFACE_CURVE('',#10273,(#10277,#10284),.PCURVE_S1.);+#10273 = LINE('',#10274,#10275);+#10274 = CARTESIAN_POINT('',(0.215473441495,-0.139644122505,1.8000001));+#10275 = VECTOR('',#10276,1.);+#10276 = DIRECTION('',(-0.,-0.,-1.));+#10277 = PCURVE('',#3966,#10278);+#10278 = DEFINITIONAL_REPRESENTATION('',(#10279),#10283);+#10279 = LINE('',#10280,#10281);+#10280 = CARTESIAN_POINT('',(3.348307591787E-02,0.));+#10281 = VECTOR('',#10282,1.);+#10282 = DIRECTION('',(0.,-1.));+#10283 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10284 = PCURVE('',#3939,#10285);+#10285 = DEFINITIONAL_REPRESENTATION('',(#10286),#10290);+#10286 = LINE('',#10287,#10288);+#10287 = CARTESIAN_POINT('',(0.,0.));+#10288 = VECTOR('',#10289,1.);+#10289 = DIRECTION('',(0.,-1.));+#10290 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10291 = ADVANCED_FACE('',(#10292),#3939,.T.);+#10292 = FACE_BOUND('',#10293,.T.);+#10293 = EDGE_LOOP('',(#10294,#10295,#10296,#10297));+#10294 = ORIENTED_EDGE('',*,*,#3923,.T.);+#10295 = ORIENTED_EDGE('',*,*,#10271,.T.);+#10296 = ORIENTED_EDGE('',*,*,#10082,.T.);+#10297 = ORIENTED_EDGE('',*,*,#10298,.F.);+#10298 = EDGE_CURVE('',#3897,#9875,#10299,.T.);+#10299 = SURFACE_CURVE('',#10300,(#10304,#10311),.PCURVE_S1.);+#10300 = LINE('',#10301,#10302);+#10301 = CARTESIAN_POINT('',(5.317900292839E-02,-0.139644122505,+ 1.8000001));+#10302 = VECTOR('',#10303,1.);+#10303 = DIRECTION('',(-0.,-0.,-1.));+#10304 = PCURVE('',#3939,#10305);+#10305 = DEFINITIONAL_REPRESENTATION('',(#10306),#10310);+#10306 = LINE('',#10307,#10308);+#10307 = CARTESIAN_POINT('',(0.162294438567,0.));+#10308 = VECTOR('',#10309,1.);+#10309 = DIRECTION('',(0.,-1.));+#10310 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10311 = PCURVE('',#3912,#10312);+#10312 = DEFINITIONAL_REPRESENTATION('',(#10313),#10317);+#10313 = LINE('',#10314,#10315);+#10314 = CARTESIAN_POINT('',(0.,0.));+#10315 = VECTOR('',#10316,1.);+#10316 = DIRECTION('',(0.,-1.));+#10317 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10318 = ADVANCED_FACE('',(#10319),#3912,.T.);+#10319 = FACE_BOUND('',#10320,.T.);+#10320 = EDGE_LOOP('',(#10321,#10322,#10323,#10324));+#10321 = ORIENTED_EDGE('',*,*,#3896,.T.);+#10322 = ORIENTED_EDGE('',*,*,#10298,.T.);+#10323 = ORIENTED_EDGE('',*,*,#9874,.T.);+#10324 = ORIENTED_EDGE('',*,*,#10325,.F.);+#10325 = EDGE_CURVE('',#3870,#9877,#10326,.T.);+#10326 = SURFACE_CURVE('',#10327,(#10331,#10338),.PCURVE_S1.);+#10327 = LINE('',#10328,#10329);+#10328 = CARTESIAN_POINT('',(5.317900292839E-02,-0.106161046587,+ 1.8000001));+#10329 = VECTOR('',#10330,1.);+#10330 = DIRECTION('',(-0.,-0.,-1.));+#10331 = PCURVE('',#3912,#10332);+#10332 = DEFINITIONAL_REPRESENTATION('',(#10333),#10337);+#10333 = LINE('',#10334,#10335);+#10334 = CARTESIAN_POINT('',(3.348307591787E-02,0.));+#10335 = VECTOR('',#10336,1.);+#10336 = DIRECTION('',(0.,-1.));+#10337 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10338 = PCURVE('',#3885,#10339);+#10339 = DEFINITIONAL_REPRESENTATION('',(#10340),#10344);+#10340 = LINE('',#10341,#10342);+#10341 = CARTESIAN_POINT('',(0.,0.));+#10342 = VECTOR('',#10343,1.);+#10343 = DIRECTION('',(0.,-1.));+#10344 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10345 = ADVANCED_FACE('',(#10346),#3885,.T.);+#10346 = FACE_BOUND('',#10347,.T.);+#10347 = EDGE_LOOP('',(#10348,#10349,#10350,#10351));+#10348 = ORIENTED_EDGE('',*,*,#3867,.T.);+#10349 = ORIENTED_EDGE('',*,*,#10325,.T.);+#10350 = ORIENTED_EDGE('',*,*,#9899,.T.);+#10351 = ORIENTED_EDGE('',*,*,#9799,.F.);+#10352 = ADVANCED_FACE('',(#10353),#3854,.T.);+#10353 = FACE_BOUND('',#10354,.T.);+#10354 = EDGE_LOOP('',(#10355,#10356,#10379,#10407));+#10355 = ORIENTED_EDGE('',*,*,#3840,.T.);+#10356 = ORIENTED_EDGE('',*,*,#10357,.T.);+#10357 = EDGE_CURVE('',#3677,#10358,#10360,.T.);+#10358 = VERTEX_POINT('',#10359);+#10359 = CARTESIAN_POINT('',(0.455369832483,0.154416067762,1.7000001));+#10360 = SURFACE_CURVE('',#10361,(#10365,#10372),.PCURVE_S1.);+#10361 = LINE('',#10362,#10363);+#10362 = CARTESIAN_POINT('',(0.455369832483,0.154416067762,1.8000001));+#10363 = VECTOR('',#10364,1.);+#10364 = DIRECTION('',(-0.,-0.,-1.));+#10365 = PCURVE('',#3854,#10366);+#10366 = DEFINITIONAL_REPRESENTATION('',(#10367),#10371);+#10367 = LINE('',#10368,#10369);+#10368 = CARTESIAN_POINT('',(0.,0.));+#10369 = VECTOR('',#10370,1.);+#10370 = DIRECTION('',(0.,-1.));+#10371 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10372 = PCURVE('',#3694,#10373);+#10373 = DEFINITIONAL_REPRESENTATION('',(#10374),#10378);+#10374 = LINE('',#10375,#10376);+#10375 = CARTESIAN_POINT('',(0.185141713899,0.));+#10376 = VECTOR('',#10377,1.);+#10377 = DIRECTION('',(0.,-1.));+#10378 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10379 = ORIENTED_EDGE('',*,*,#10380,.T.);+#10380 = EDGE_CURVE('',#10358,#10381,#10383,.T.);+#10381 = VERTEX_POINT('',#10382);+#10382 = CARTESIAN_POINT('',(0.455369832483,0.137477570533,1.7000001));+#10383 = SURFACE_CURVE('',#10384,(#10388,#10395),.PCURVE_S1.);+#10384 = LINE('',#10385,#10386);+#10385 = CARTESIAN_POINT('',(0.455369832483,0.154416067762,1.7000001));+#10386 = VECTOR('',#10387,1.);+#10387 = DIRECTION('',(0.,-1.,0.));+#10388 = PCURVE('',#3854,#10389);+#10389 = DEFINITIONAL_REPRESENTATION('',(#10390),#10394);+#10390 = LINE('',#10391,#10392);+#10391 = CARTESIAN_POINT('',(0.,-0.1));+#10392 = VECTOR('',#10393,1.);+#10393 = DIRECTION('',(1.,0.));+#10394 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10395 = PCURVE('',#10396,#10401);+#10396 = PLANE('',#10397);+#10397 = AXIS2_PLACEMENT_3D('',#10398,#10399,#10400);+#10398 = CARTESIAN_POINT('',(0.24285078004,-0.139644122505,1.7000001));+#10399 = DIRECTION('',(0.,0.,1.));+#10400 = DIRECTION('',(1.,0.,0.));+#10401 = DEFINITIONAL_REPRESENTATION('',(#10402),#10406);+#10402 = LINE('',#10403,#10404);+#10403 = CARTESIAN_POINT('',(0.212519052443,0.294060190267));+#10404 = VECTOR('',#10405,1.);+#10405 = DIRECTION('',(0.,-1.));+#10406 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10407 = ORIENTED_EDGE('',*,*,#10408,.F.);+#10408 = EDGE_CURVE('',#3814,#10381,#10409,.T.);+#10409 = SURFACE_CURVE('',#10410,(#10414,#10421),.PCURVE_S1.);+#10410 = LINE('',#10411,#10412);+#10411 = CARTESIAN_POINT('',(0.455369832483,0.137477570533,1.8000001));+#10412 = VECTOR('',#10413,1.);+#10413 = DIRECTION('',(-0.,-0.,-1.));+#10414 = PCURVE('',#3854,#10415);+#10415 = DEFINITIONAL_REPRESENTATION('',(#10416),#10420);+#10416 = LINE('',#10417,#10418);+#10417 = CARTESIAN_POINT('',(1.693849722904E-02,0.));+#10418 = VECTOR('',#10419,1.);+#10419 = DIRECTION('',(0.,-1.));+#10420 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10421 = PCURVE('',#3829,#10422);+#10422 = DEFINITIONAL_REPRESENTATION('',(#10423),#10427);+#10423 = LINE('',#10424,#10425);+#10424 = CARTESIAN_POINT('',(0.,0.));+#10425 = VECTOR('',#10426,1.);+#10426 = DIRECTION('',(0.,-1.));+#10427 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10428 = ADVANCED_FACE('',(#10429),#10396,.T.);+#10429 = FACE_BOUND('',#10430,.F.);+#10430 = EDGE_LOOP('',(#10431,#10456,#10477,#10478,#10501,#10524,#10547)+ );+#10431 = ORIENTED_EDGE('',*,*,#10432,.T.);+#10432 = EDGE_CURVE('',#10433,#10435,#10437,.T.);+#10433 = VERTEX_POINT('',#10434);+#10434 = CARTESIAN_POINT('',(0.270228118584,0.120932991845,1.7000001));+#10435 = VERTEX_POINT('',#10436);+#10436 = CARTESIAN_POINT('',(0.270228118584,0.154416067762,1.7000001));+#10437 = SURFACE_CURVE('',#10438,(#10442,#10449),.PCURVE_S1.);+#10438 = LINE('',#10439,#10440);+#10439 = CARTESIAN_POINT('',(0.270228118584,0.120932991845,1.7000001));+#10440 = VECTOR('',#10441,1.);+#10441 = DIRECTION('',(0.,1.,0.));+#10442 = PCURVE('',#10396,#10443);+#10443 = DEFINITIONAL_REPRESENTATION('',(#10444),#10448);+#10444 = LINE('',#10445,#10446);+#10445 = CARTESIAN_POINT('',(2.737733854461E-02,0.260577114349));+#10446 = VECTOR('',#10447,1.);+#10447 = DIRECTION('',(0.,1.));+#10448 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10449 = PCURVE('',#3721,#10450);+#10450 = DEFINITIONAL_REPRESENTATION('',(#10451),#10455);+#10451 = LINE('',#10452,#10453);+#10452 = CARTESIAN_POINT('',(0.,-0.1));+#10453 = VECTOR('',#10454,1.);+#10454 = DIRECTION('',(1.,0.));+#10455 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10456 = ORIENTED_EDGE('',*,*,#10457,.T.);+#10457 = EDGE_CURVE('',#10435,#10358,#10458,.T.);+#10458 = SURFACE_CURVE('',#10459,(#10463,#10470),.PCURVE_S1.);+#10459 = LINE('',#10460,#10461);+#10460 = CARTESIAN_POINT('',(0.270228118584,0.154416067762,1.7000001));+#10461 = VECTOR('',#10462,1.);+#10462 = DIRECTION('',(1.,0.,0.));+#10463 = PCURVE('',#10396,#10464);+#10464 = DEFINITIONAL_REPRESENTATION('',(#10465),#10469);+#10465 = LINE('',#10466,#10467);+#10466 = CARTESIAN_POINT('',(2.737733854461E-02,0.294060190267));+#10467 = VECTOR('',#10468,1.);+#10468 = DIRECTION('',(1.,0.));+#10469 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10470 = PCURVE('',#3694,#10471);+#10471 = DEFINITIONAL_REPRESENTATION('',(#10472),#10476);+#10472 = LINE('',#10473,#10474);+#10473 = CARTESIAN_POINT('',(0.,-0.1));+#10474 = VECTOR('',#10475,1.);+#10475 = DIRECTION('',(1.,0.));+#10476 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10477 = ORIENTED_EDGE('',*,*,#10380,.T.);+#10478 = ORIENTED_EDGE('',*,*,#10479,.T.);+#10479 = EDGE_CURVE('',#10381,#10480,#10482,.T.);+#10480 = VERTEX_POINT('',#10481);+#10481 = CARTESIAN_POINT('',(0.350193582247,-0.139644122505,1.7000001));+#10482 = SURFACE_CURVE('',#10483,(#10487,#10494),.PCURVE_S1.);+#10483 = LINE('',#10484,#10485);+#10484 = CARTESIAN_POINT('',(0.455369832483,0.137477570533,1.7000001));+#10485 = VECTOR('',#10486,1.);+#10486 = DIRECTION('',(-0.354834508557,-0.934929126478,0.));+#10487 = PCURVE('',#10396,#10488);+#10488 = DEFINITIONAL_REPRESENTATION('',(#10489),#10493);+#10489 = LINE('',#10490,#10491);+#10490 = CARTESIAN_POINT('',(0.212519052443,0.277121693038));+#10491 = VECTOR('',#10492,1.);+#10492 = DIRECTION('',(-0.354834508557,-0.934929126478));+#10493 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10494 = PCURVE('',#3829,#10495);+#10495 = DEFINITIONAL_REPRESENTATION('',(#10496),#10500);+#10496 = LINE('',#10497,#10498);+#10497 = CARTESIAN_POINT('',(-0.,-0.1));+#10498 = VECTOR('',#10499,1.);+#10499 = DIRECTION('',(1.,0.));+#10500 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10501 = ORIENTED_EDGE('',*,*,#10502,.T.);+#10502 = EDGE_CURVE('',#10480,#10503,#10505,.T.);+#10503 = VERTEX_POINT('',#10504);+#10504 = CARTESIAN_POINT('',(0.308635176255,-0.139644122505,1.7000001));+#10505 = SURFACE_CURVE('',#10506,(#10510,#10517),.PCURVE_S1.);+#10506 = LINE('',#10507,#10508);+#10507 = CARTESIAN_POINT('',(0.350193582247,-0.139644122505,1.7000001));+#10508 = VECTOR('',#10509,1.);+#10509 = DIRECTION('',(-1.,0.,0.));+#10510 = PCURVE('',#10396,#10511);+#10511 = DEFINITIONAL_REPRESENTATION('',(#10512),#10516);+#10512 = LINE('',#10513,#10514);+#10513 = CARTESIAN_POINT('',(0.107342802207,0.));+#10514 = VECTOR('',#10515,1.);+#10515 = DIRECTION('',(-1.,0.));+#10516 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10517 = PCURVE('',#3802,#10518);+#10518 = DEFINITIONAL_REPRESENTATION('',(#10519),#10523);+#10519 = LINE('',#10520,#10521);+#10520 = CARTESIAN_POINT('',(0.,-0.1));+#10521 = VECTOR('',#10522,1.);+#10522 = DIRECTION('',(1.,0.));+#10523 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10524 = ORIENTED_EDGE('',*,*,#10525,.T.);+#10525 = EDGE_CURVE('',#10503,#10526,#10528,.T.);+#10526 = VERTEX_POINT('',#10527);+#10527 = CARTESIAN_POINT('',(0.411053996709,0.120932991845,1.7000001));+#10528 = SURFACE_CURVE('',#10529,(#10533,#10540),.PCURVE_S1.);+#10529 = LINE('',#10530,#10531);+#10530 = CARTESIAN_POINT('',(0.308635176255,-0.139644122505,1.7000001));+#10531 = VECTOR('',#10532,1.);+#10532 = DIRECTION('',(0.365804721382,0.93069162767,0.));+#10533 = PCURVE('',#10396,#10534);+#10534 = DEFINITIONAL_REPRESENTATION('',(#10535),#10539);+#10535 = LINE('',#10536,#10537);+#10536 = CARTESIAN_POINT('',(6.578439621511E-02,0.));+#10537 = VECTOR('',#10538,1.);+#10538 = DIRECTION('',(0.365804721382,0.93069162767));+#10539 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10540 = PCURVE('',#3775,#10541);+#10541 = DEFINITIONAL_REPRESENTATION('',(#10542),#10546);+#10542 = LINE('',#10543,#10544);+#10543 = CARTESIAN_POINT('',(0.,-0.1));+#10544 = VECTOR('',#10545,1.);+#10545 = DIRECTION('',(1.,0.));+#10546 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10547 = ORIENTED_EDGE('',*,*,#10548,.T.);+#10548 = EDGE_CURVE('',#10526,#10433,#10549,.T.);+#10549 = SURFACE_CURVE('',#10550,(#10554,#10561),.PCURVE_S1.);+#10550 = LINE('',#10551,#10552);+#10551 = CARTESIAN_POINT('',(0.411053996709,0.120932991845,1.7000001));+#10552 = VECTOR('',#10553,1.);+#10553 = DIRECTION('',(-1.,0.,0.));+#10554 = PCURVE('',#10396,#10555);+#10555 = DEFINITIONAL_REPRESENTATION('',(#10556),#10560);+#10556 = LINE('',#10557,#10558);+#10557 = CARTESIAN_POINT('',(0.16820321667,0.260577114349));+#10558 = VECTOR('',#10559,1.);+#10559 = DIRECTION('',(-1.,0.));+#10560 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10561 = PCURVE('',#3748,#10562);+#10562 = DEFINITIONAL_REPRESENTATION('',(#10563),#10567);+#10563 = LINE('',#10564,#10565);+#10564 = CARTESIAN_POINT('',(0.,-0.1));+#10565 = VECTOR('',#10566,1.);+#10566 = DIRECTION('',(1.,0.));+#10567 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10568 = ADVANCED_FACE('',(#10569),#3829,.T.);+#10569 = FACE_BOUND('',#10570,.T.);+#10570 = EDGE_LOOP('',(#10571,#10572,#10573,#10574));+#10571 = ORIENTED_EDGE('',*,*,#3813,.T.);+#10572 = ORIENTED_EDGE('',*,*,#10408,.T.);+#10573 = ORIENTED_EDGE('',*,*,#10479,.T.);+#10574 = ORIENTED_EDGE('',*,*,#10575,.F.);+#10575 = EDGE_CURVE('',#3787,#10480,#10576,.T.);+#10576 = SURFACE_CURVE('',#10577,(#10581,#10588),.PCURVE_S1.);+#10577 = LINE('',#10578,#10579);+#10578 = CARTESIAN_POINT('',(0.350193582247,-0.139644122505,1.8000001));+#10579 = VECTOR('',#10580,1.);+#10580 = DIRECTION('',(-0.,-0.,-1.));+#10581 = PCURVE('',#3829,#10582);+#10582 = DEFINITIONAL_REPRESENTATION('',(#10583),#10587);+#10583 = LINE('',#10584,#10585);+#10584 = CARTESIAN_POINT('',(0.296409305464,0.));+#10585 = VECTOR('',#10586,1.);+#10586 = DIRECTION('',(0.,-1.));+#10587 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10588 = PCURVE('',#3802,#10589);+#10589 = DEFINITIONAL_REPRESENTATION('',(#10590),#10594);+#10590 = LINE('',#10591,#10592);+#10591 = CARTESIAN_POINT('',(0.,0.));+#10592 = VECTOR('',#10593,1.);+#10593 = DIRECTION('',(0.,-1.));+#10594 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10595 = ADVANCED_FACE('',(#10596),#3802,.T.);+#10596 = FACE_BOUND('',#10597,.T.);+#10597 = EDGE_LOOP('',(#10598,#10599,#10600,#10601));+#10598 = ORIENTED_EDGE('',*,*,#3786,.T.);+#10599 = ORIENTED_EDGE('',*,*,#10575,.T.);+#10600 = ORIENTED_EDGE('',*,*,#10502,.T.);+#10601 = ORIENTED_EDGE('',*,*,#10602,.F.);+#10602 = EDGE_CURVE('',#3760,#10503,#10603,.T.);+#10603 = SURFACE_CURVE('',#10604,(#10608,#10615),.PCURVE_S1.);+#10604 = LINE('',#10605,#10606);+#10605 = CARTESIAN_POINT('',(0.308635176255,-0.139644122505,1.8000001));+#10606 = VECTOR('',#10607,1.);+#10607 = DIRECTION('',(-0.,-0.,-1.));+#10608 = PCURVE('',#3802,#10609);+#10609 = DEFINITIONAL_REPRESENTATION('',(#10610),#10614);+#10610 = LINE('',#10611,#10612);+#10611 = CARTESIAN_POINT('',(4.155840599218E-02,0.));+#10612 = VECTOR('',#10613,1.);+#10613 = DIRECTION('',(0.,-1.));+#10614 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10615 = PCURVE('',#3775,#10616);+#10616 = DEFINITIONAL_REPRESENTATION('',(#10617),#10621);+#10617 = LINE('',#10618,#10619);+#10618 = CARTESIAN_POINT('',(0.,0.));+#10619 = VECTOR('',#10620,1.);+#10620 = DIRECTION('',(0.,-1.));+#10621 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10622 = ADVANCED_FACE('',(#10623),#3775,.T.);+#10623 = FACE_BOUND('',#10624,.T.);+#10624 = EDGE_LOOP('',(#10625,#10626,#10627,#10628));+#10625 = ORIENTED_EDGE('',*,*,#3759,.T.);+#10626 = ORIENTED_EDGE('',*,*,#10602,.T.);+#10627 = ORIENTED_EDGE('',*,*,#10525,.T.);+#10628 = ORIENTED_EDGE('',*,*,#10629,.F.);+#10629 = EDGE_CURVE('',#3733,#10526,#10630,.T.);+#10630 = SURFACE_CURVE('',#10631,(#10635,#10642),.PCURVE_S1.);+#10631 = LINE('',#10632,#10633);+#10632 = CARTESIAN_POINT('',(0.411053996709,0.120932991845,1.8000001));+#10633 = VECTOR('',#10634,1.);+#10634 = DIRECTION('',(-0.,-0.,-1.));+#10635 = PCURVE('',#3775,#10636);+#10636 = DEFINITIONAL_REPRESENTATION('',(#10637),#10641);+#10637 = LINE('',#10638,#10639);+#10638 = CARTESIAN_POINT('',(0.279982226768,0.));+#10639 = VECTOR('',#10640,1.);+#10640 = DIRECTION('',(0.,-1.));+#10641 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10642 = PCURVE('',#3748,#10643);+#10643 = DEFINITIONAL_REPRESENTATION('',(#10644),#10648);+#10644 = LINE('',#10645,#10646);+#10645 = CARTESIAN_POINT('',(0.,0.));+#10646 = VECTOR('',#10647,1.);+#10647 = DIRECTION('',(0.,-1.));+#10648 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10649 = ADVANCED_FACE('',(#10650),#3748,.T.);+#10650 = FACE_BOUND('',#10651,.T.);+#10651 = EDGE_LOOP('',(#10652,#10653,#10654,#10655));+#10652 = ORIENTED_EDGE('',*,*,#3732,.T.);+#10653 = ORIENTED_EDGE('',*,*,#10629,.T.);+#10654 = ORIENTED_EDGE('',*,*,#10548,.T.);+#10655 = ORIENTED_EDGE('',*,*,#10656,.F.);+#10656 = EDGE_CURVE('',#3706,#10433,#10657,.T.);+#10657 = SURFACE_CURVE('',#10658,(#10662,#10669),.PCURVE_S1.);+#10658 = LINE('',#10659,#10660);+#10659 = CARTESIAN_POINT('',(0.270228118584,0.120932991845,1.8000001));+#10660 = VECTOR('',#10661,1.);+#10661 = DIRECTION('',(-0.,-0.,-1.));+#10662 = PCURVE('',#3748,#10663);+#10663 = DEFINITIONAL_REPRESENTATION('',(#10664),#10668);+#10664 = LINE('',#10665,#10666);+#10665 = CARTESIAN_POINT('',(0.140825878125,0.));+#10666 = VECTOR('',#10667,1.);+#10667 = DIRECTION('',(0.,-1.));+#10668 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10669 = PCURVE('',#3721,#10670);+#10670 = DEFINITIONAL_REPRESENTATION('',(#10671),#10675);+#10671 = LINE('',#10672,#10673);+#10672 = CARTESIAN_POINT('',(0.,0.));+#10673 = VECTOR('',#10674,1.);+#10674 = DIRECTION('',(0.,-1.));+#10675 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10676 = ADVANCED_FACE('',(#10677),#3721,.T.);+#10677 = FACE_BOUND('',#10678,.T.);+#10678 = EDGE_LOOP('',(#10679,#10680,#10681,#10682));+#10679 = ORIENTED_EDGE('',*,*,#3705,.T.);+#10680 = ORIENTED_EDGE('',*,*,#10656,.T.);+#10681 = ORIENTED_EDGE('',*,*,#10432,.T.);+#10682 = ORIENTED_EDGE('',*,*,#10683,.F.);+#10683 = EDGE_CURVE('',#3679,#10435,#10684,.T.);+#10684 = SURFACE_CURVE('',#10685,(#10689,#10696),.PCURVE_S1.);+#10685 = LINE('',#10686,#10687);+#10686 = CARTESIAN_POINT('',(0.270228118584,0.154416067762,1.8000001));+#10687 = VECTOR('',#10688,1.);+#10688 = DIRECTION('',(-0.,-0.,-1.));+#10689 = PCURVE('',#3721,#10690);+#10690 = DEFINITIONAL_REPRESENTATION('',(#10691),#10695);+#10691 = LINE('',#10692,#10693);+#10692 = CARTESIAN_POINT('',(3.348307591787E-02,0.));+#10693 = VECTOR('',#10694,1.);+#10694 = DIRECTION('',(0.,-1.));+#10695 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10696 = PCURVE('',#3694,#10697);+#10697 = DEFINITIONAL_REPRESENTATION('',(#10698),#10702);+#10698 = LINE('',#10699,#10700);+#10699 = CARTESIAN_POINT('',(0.,0.));+#10700 = VECTOR('',#10701,1.);+#10701 = DIRECTION('',(0.,-1.));+#10702 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10703 = ADVANCED_FACE('',(#10704),#3694,.T.);+#10704 = FACE_BOUND('',#10705,.T.);+#10705 = EDGE_LOOP('',(#10706,#10707,#10708,#10709));+#10706 = ORIENTED_EDGE('',*,*,#3676,.T.);+#10707 = ORIENTED_EDGE('',*,*,#10683,.T.);+#10708 = ORIENTED_EDGE('',*,*,#10457,.T.);+#10709 = ORIENTED_EDGE('',*,*,#10357,.F.);+#10710 = ADVANCED_FACE('',(#10711),#3658,.T.);+#10711 = FACE_BOUND('',#10712,.T.);+#10712 = EDGE_LOOP('',(#10713,#10714,#10737,#10765));+#10713 = ORIENTED_EDGE('',*,*,#3640,.T.);+#10714 = ORIENTED_EDGE('',*,*,#10715,.T.);+#10715 = EDGE_CURVE('',#3027,#10716,#10718,.T.);+#10716 = VERTEX_POINT('',#10717);+#10717 = CARTESIAN_POINT('',(0.654495654559,0.12241018637,1.7000001));+#10718 = SURFACE_CURVE('',#10719,(#10723,#10730),.PCURVE_S1.);+#10719 = LINE('',#10720,#10721);+#10720 = CARTESIAN_POINT('',(0.654495654559,0.12241018637,1.8000001));+#10721 = VECTOR('',#10722,1.);+#10722 = DIRECTION('',(-0.,-0.,-1.));+#10723 = PCURVE('',#3658,#10724);+#10724 = DEFINITIONAL_REPRESENTATION('',(#10725),#10729);+#10725 = LINE('',#10726,#10727);+#10726 = CARTESIAN_POINT('',(0.,0.));+#10727 = VECTOR('',#10728,1.);+#10728 = DIRECTION('',(0.,-1.));+#10729 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10730 = PCURVE('',#3048,#10731);+#10731 = DEFINITIONAL_REPRESENTATION('',(#10732),#10736);+#10732 = LINE('',#10733,#10734);+#10733 = CARTESIAN_POINT('',(1.,0.));+#10734 = VECTOR('',#10735,1.);+#10735 = DIRECTION('',(0.,-1.));+#10736 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10737 = ORIENTED_EDGE('',*,*,#10738,.T.);+#10738 = EDGE_CURVE('',#10716,#10739,#10741,.T.);+#10739 = VERTEX_POINT('',#10740);+#10740 = CARTESIAN_POINT('',(0.625345682584,0.126250892137,1.7000001));+#10741 = SURFACE_CURVE('',#10742,(#10746,#10753),.PCURVE_S1.);+#10742 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10743,#10744,#10745),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10743 = CARTESIAN_POINT('',(0.654495654559,0.12241018637,1.7000001));+#10744 = CARTESIAN_POINT('',(0.640511546382,0.126250892137,1.7000001));+#10745 = CARTESIAN_POINT('',(0.625345682584,0.126250892137,1.7000001));+#10746 = PCURVE('',#3658,#10747);+#10747 = DEFINITIONAL_REPRESENTATION('',(#10748),#10752);+#10748 = LINE('',#10749,#10750);+#10749 = CARTESIAN_POINT('',(0.,-0.1));+#10750 = VECTOR('',#10751,1.);+#10751 = DIRECTION('',(1.,0.));+#10752 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10753 = PCURVE('',#10754,#10759);+#10754 = PLANE('',#10755);+#10755 = AXIS2_PLACEMENT_3D('',#10756,#10757,#10758);+#10756 = CARTESIAN_POINT('',(0.485701560079,-0.139644122505,1.7000001));+#10757 = DIRECTION('',(0.,0.,1.));+#10758 = DIRECTION('',(1.,0.,0.));+#10759 = DEFINITIONAL_REPRESENTATION('',(#10760),#10764);+#10760 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10761,#10762,#10763),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10761 = CARTESIAN_POINT('',(0.16879409448,0.262054308875));+#10762 = CARTESIAN_POINT('',(0.154809986303,0.265895014642));+#10763 = CARTESIAN_POINT('',(0.139644122505,0.265895014642));+#10764 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10765 = ORIENTED_EDGE('',*,*,#10766,.F.);+#10766 = EDGE_CURVE('',#3596,#10739,#10767,.T.);+#10767 = SURFACE_CURVE('',#10768,(#10772,#10779),.PCURVE_S1.);+#10768 = LINE('',#10769,#10770);+#10769 = CARTESIAN_POINT('',(0.625345682584,0.126250892137,1.8000001));+#10770 = VECTOR('',#10771,1.);+#10771 = DIRECTION('',(-0.,-0.,-1.));+#10772 = PCURVE('',#3658,#10773);+#10773 = DEFINITIONAL_REPRESENTATION('',(#10774),#10778);+#10774 = LINE('',#10775,#10776);+#10775 = CARTESIAN_POINT('',(1.,0.));+#10776 = VECTOR('',#10777,1.);+#10777 = DIRECTION('',(0.,-1.));+#10778 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10779 = PCURVE('',#3621,#10780);+#10780 = DEFINITIONAL_REPRESENTATION('',(#10781),#10785);+#10781 = LINE('',#10782,#10783);+#10782 = CARTESIAN_POINT('',(0.,0.));+#10783 = VECTOR('',#10784,1.);+#10784 = DIRECTION('',(0.,-1.));+#10785 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10786 = ADVANCED_FACE('',(#10787,#11156),#10754,.T.);+#10787 = FACE_BOUND('',#10788,.F.);+#10788 = EDGE_LOOP('',(#10789,#10814,#10835,#10836,#10859,#10882,#10905,+ #10928,#10951,#10974,#10997,#11020,#11043,#11066,#11089,#11112,+ #11135));+#10789 = ORIENTED_EDGE('',*,*,#10790,.T.);+#10790 = EDGE_CURVE('',#10791,#10793,#10795,.T.);+#10791 = VERTEX_POINT('',#10792);+#10792 = CARTESIAN_POINT('',(0.680888196753,0.147916411849,1.7000001));+#10793 = VERTEX_POINT('',#10794);+#10794 = CARTESIAN_POINT('',(0.680888196753,0.111281987609,1.7000001));+#10795 = SURFACE_CURVE('',#10796,(#10800,#10807),.PCURVE_S1.);+#10796 = LINE('',#10797,#10798);+#10797 = CARTESIAN_POINT('',(0.680888196753,0.147916411849,1.7000001));+#10798 = VECTOR('',#10799,1.);+#10799 = DIRECTION('',(0.,-1.,0.));+#10800 = PCURVE('',#10754,#10801);+#10801 = DEFINITIONAL_REPRESENTATION('',(#10802),#10806);+#10802 = LINE('',#10803,#10804);+#10803 = CARTESIAN_POINT('',(0.195186636674,0.287560534353));+#10804 = VECTOR('',#10805,1.);+#10805 = DIRECTION('',(0.,-1.));+#10806 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10807 = PCURVE('',#3080,#10808);+#10808 = DEFINITIONAL_REPRESENTATION('',(#10809),#10813);+#10809 = LINE('',#10810,#10811);+#10810 = CARTESIAN_POINT('',(0.,-0.1));+#10811 = VECTOR('',#10812,1.);+#10812 = DIRECTION('',(1.,0.));+#10813 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10814 = ORIENTED_EDGE('',*,*,#10815,.T.);+#10815 = EDGE_CURVE('',#10793,#10716,#10816,.T.);+#10816 = SURFACE_CURVE('',#10817,(#10821,#10828),.PCURVE_S1.);+#10817 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10818,#10819,#10820),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10818 = CARTESIAN_POINT('',(0.680888196753,0.111281987609,1.7000001));+#10819 = CARTESIAN_POINT('',(0.668479762737,0.118569480603,1.7000001));+#10820 = CARTESIAN_POINT('',(0.654495654559,0.12241018637,1.7000001));+#10821 = PCURVE('',#10754,#10822);+#10822 = DEFINITIONAL_REPRESENTATION('',(#10823),#10827);+#10823 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10824,#10825,#10826),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10824 = CARTESIAN_POINT('',(0.195186636674,0.250926110114));+#10825 = CARTESIAN_POINT('',(0.182778202658,0.258213603108));+#10826 = CARTESIAN_POINT('',(0.16879409448,0.262054308875));+#10827 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10828 = PCURVE('',#3048,#10829);+#10829 = DEFINITIONAL_REPRESENTATION('',(#10830),#10834);+#10830 = LINE('',#10831,#10832);+#10831 = CARTESIAN_POINT('',(0.,-0.1));+#10832 = VECTOR('',#10833,1.);+#10833 = DIRECTION('',(1.,0.));+#10834 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10835 = ORIENTED_EDGE('',*,*,#10738,.T.);+#10836 = ORIENTED_EDGE('',*,*,#10837,.T.);+#10837 = EDGE_CURVE('',#10739,#10838,#10840,.T.);+#10838 = VERTEX_POINT('',#10839);+#10839 = CARTESIAN_POINT('',(0.568030534983,9.77902776072E-02,1.7000001)+ );+#10840 = SURFACE_CURVE('',#10841,(#10845,#10852),.PCURVE_S1.);+#10841 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10842,#10843,#10844),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10842 = CARTESIAN_POINT('',(0.625345682584,0.126250892137,1.7000001));+#10843 = CARTESIAN_POINT('',(0.587529502724,0.126250892137,1.7000001));+#10844 = CARTESIAN_POINT('',(0.568030534983,9.77902776072E-02,1.7000001)+ );+#10845 = PCURVE('',#10754,#10846);+#10846 = DEFINITIONAL_REPRESENTATION('',(#10847),#10851);+#10847 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10848,#10849,#10850),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10848 = CARTESIAN_POINT('',(0.139644122505,0.265895014642));+#10849 = CARTESIAN_POINT('',(0.101827942644,0.265895014642));+#10850 = CARTESIAN_POINT('',(8.232897490395E-02,0.237434400112));+#10851 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10852 = PCURVE('',#3621,#10853);+#10853 = DEFINITIONAL_REPRESENTATION('',(#10854),#10858);+#10854 = LINE('',#10855,#10856);+#10855 = CARTESIAN_POINT('',(0.,-0.1));+#10856 = VECTOR('',#10857,1.);+#10857 = DIRECTION('',(1.,0.));+#10858 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10859 = ORIENTED_EDGE('',*,*,#10860,.T.);+#10860 = EDGE_CURVE('',#10838,#10861,#10863,.T.);+#10861 = VERTEX_POINT('',#10862);+#10862 = CARTESIAN_POINT('',(0.548531567243,1.398410817746E-02,1.7000001+ ));+#10863 = SURFACE_CURVE('',#10864,(#10868,#10875),.PCURVE_S1.);+#10864 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10865,#10866,#10867),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10865 = CARTESIAN_POINT('',(0.568030534983,9.77902776072E-02,1.7000001)+ );+#10866 = CARTESIAN_POINT('',(0.548531567243,6.932966307701E-02,1.7000001+ ));+#10867 = CARTESIAN_POINT('',(0.548531567243,1.398410817746E-02,1.7000001+ ));+#10868 = PCURVE('',#10754,#10869);+#10869 = DEFINITIONAL_REPRESENTATION('',(#10870),#10874);+#10870 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10871,#10872,#10873),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10871 = CARTESIAN_POINT('',(8.232897490395E-02,0.237434400112));+#10872 = CARTESIAN_POINT('',(6.283000716354E-02,0.208973785582));+#10873 = CARTESIAN_POINT('',(6.283000716354E-02,0.153628230682));+#10874 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10875 = PCURVE('',#3579,#10876);+#10876 = DEFINITIONAL_REPRESENTATION('',(#10877),#10881);+#10877 = LINE('',#10878,#10879);+#10878 = CARTESIAN_POINT('',(0.,-0.1));+#10879 = VECTOR('',#10880,1.);+#10880 = DIRECTION('',(1.,0.));+#10881 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10882 = ORIENTED_EDGE('',*,*,#10883,.T.);+#10883 = EDGE_CURVE('',#10861,#10884,#10886,.T.);+#10884 = VERTEX_POINT('',#10885);+#10885 = CARTESIAN_POINT('',(0.574727150167,4.42173561386E-02,1.7000001)+ );+#10886 = SURFACE_CURVE('',#10887,(#10891,#10898),.PCURVE_S1.);+#10887 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10888,#10889,#10890),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10888 = CARTESIAN_POINT('',(0.548531567243,1.398410817746E-02,1.7000001+ ));+#10889 = CARTESIAN_POINT('',(0.557985612208,3.368003518798E-02,1.7000001+ ));+#10890 = CARTESIAN_POINT('',(0.574727150167,4.42173561386E-02,1.7000001)+ );+#10891 = PCURVE('',#10754,#10892);+#10892 = DEFINITIONAL_REPRESENTATION('',(#10893),#10897);+#10893 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10894,#10895,#10896),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10894 = CARTESIAN_POINT('',(6.283000716354E-02,0.153628230682));+#10895 = CARTESIAN_POINT('',(7.228405212858E-02,0.173324157693));+#10896 = CARTESIAN_POINT('',(8.902559008752E-02,0.183861478643));+#10897 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10898 = PCURVE('',#3543,#10899);+#10899 = DEFINITIONAL_REPRESENTATION('',(#10900),#10904);+#10900 = LINE('',#10901,#10902);+#10901 = CARTESIAN_POINT('',(0.,-0.1));+#10902 = VECTOR('',#10903,1.);+#10903 = DIRECTION('',(1.,0.));+#10904 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10905 = ORIENTED_EDGE('',*,*,#10906,.T.);+#10906 = EDGE_CURVE('',#10884,#10907,#10909,.T.);+#10907 = VERTEX_POINT('',#10908);+#10908 = CARTESIAN_POINT('',(0.613134207837,5.475467708923E-02,1.7000001+ ));+#10909 = SURFACE_CURVE('',#10910,(#10914,#10921),.PCURVE_S1.);+#10910 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10911,#10912,#10913),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10911 = CARTESIAN_POINT('',(0.574727150167,4.42173561386E-02,1.7000001)+ );+#10912 = CARTESIAN_POINT('',(0.591468688126,5.475467708923E-02,1.7000001+ ));+#10913 = CARTESIAN_POINT('',(0.613134207837,5.475467708923E-02,1.7000001+ ));+#10914 = PCURVE('',#10754,#10915);+#10915 = DEFINITIONAL_REPRESENTATION('',(#10916),#10920);+#10916 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10917,#10918,#10919),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10917 = CARTESIAN_POINT('',(8.902559008752E-02,0.183861478643));+#10918 = CARTESIAN_POINT('',(0.105767128046,0.194398799594));+#10919 = CARTESIAN_POINT('',(0.127432647758,0.194398799594));+#10920 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10921 = PCURVE('',#3507,#10922);+#10922 = DEFINITIONAL_REPRESENTATION('',(#10923),#10927);+#10923 = LINE('',#10924,#10925);+#10924 = CARTESIAN_POINT('',(0.,-0.1));+#10925 = VECTOR('',#10926,1.);+#10926 = DIRECTION('',(1.,0.));+#10927 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10928 = ORIENTED_EDGE('',*,*,#10929,.T.);+#10929 = EDGE_CURVE('',#10907,#10930,#10932,.T.);+#10930 = VERTEX_POINT('',#10931);+#10931 = CARTESIAN_POINT('',(0.679017083687,2.86575738003E-02,1.7000001)+ );+#10932 = SURFACE_CURVE('',#10933,(#10937,#10944),.PCURVE_S1.);+#10933 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10934,#10935,#10936),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10934 = CARTESIAN_POINT('',(0.613134207837,5.475467708923E-02,1.7000001+ ));+#10935 = CARTESIAN_POINT('',(0.65567741018,5.475467708923E-02,1.7000001)+ );+#10936 = CARTESIAN_POINT('',(0.679017083687,2.86575738003E-02,1.7000001)+ );+#10937 = PCURVE('',#10754,#10938);+#10938 = DEFINITIONAL_REPRESENTATION('',(#10939),#10943);+#10939 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10940,#10941,#10942),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10940 = CARTESIAN_POINT('',(0.127432647758,0.194398799594));+#10941 = CARTESIAN_POINT('',(0.169975850101,0.194398799594));+#10942 = CARTESIAN_POINT('',(0.193315523608,0.168301696305));+#10943 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10944 = PCURVE('',#3468,#10945);+#10945 = DEFINITIONAL_REPRESENTATION('',(#10946),#10950);+#10946 = LINE('',#10947,#10948);+#10947 = CARTESIAN_POINT('',(0.,-0.1));+#10948 = VECTOR('',#10949,1.);+#10949 = DIRECTION('',(1.,0.));+#10950 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10951 = ORIENTED_EDGE('',*,*,#10952,.T.);+#10952 = EDGE_CURVE('',#10930,#10953,#10955,.T.);+#10953 = VERTEX_POINT('',#10954);+#10954 = CARTESIAN_POINT('',(0.702356757195,-4.530063212418E-02,+ 1.7000001));+#10955 = SURFACE_CURVE('',#10956,(#10960,#10967),.PCURVE_S1.);+#10956 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10957,#10958,#10959),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10957 = CARTESIAN_POINT('',(0.679017083687,2.86575738003E-02,1.7000001)+ );+#10958 = CARTESIAN_POINT('',(0.702356757195,2.560470511367E-03,1.7000001+ ));+#10959 = CARTESIAN_POINT('',(0.702356757195,-4.530063212418E-02,+ 1.7000001));+#10960 = PCURVE('',#10754,#10961);+#10961 = DEFINITIONAL_REPRESENTATION('',(#10962),#10966);+#10962 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10963,#10964,#10965),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10963 = CARTESIAN_POINT('',(0.193315523608,0.168301696305));+#10964 = CARTESIAN_POINT('',(0.216655197116,0.142204593016));+#10965 = CARTESIAN_POINT('',(0.216655197116,9.434349038036E-02));+#10966 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10967 = PCURVE('',#3426,#10968);+#10968 = DEFINITIONAL_REPRESENTATION('',(#10969),#10973);+#10969 = LINE('',#10970,#10971);+#10970 = CARTESIAN_POINT('',(0.,-0.1));+#10971 = VECTOR('',#10972,1.);+#10972 = DIRECTION('',(1.,0.));+#10973 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10974 = ORIENTED_EDGE('',*,*,#10975,.T.);+#10975 = EDGE_CURVE('',#10953,#10976,#10978,.T.);+#10976 = VERTEX_POINT('',#10977);+#10977 = CARTESIAN_POINT('',(0.678327726242,-0.119160358414,1.7000001));+#10978 = SURFACE_CURVE('',#10979,(#10983,#10990),.PCURVE_S1.);+#10979 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10980,#10981,#10982),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10980 = CARTESIAN_POINT('',(0.702356757195,-4.530063212418E-02,+ 1.7000001));+#10981 = CARTESIAN_POINT('',(0.702356757195,-9.296477548962E-02,+ 1.7000001));+#10982 = CARTESIAN_POINT('',(0.678327726242,-0.119160358414,1.7000001));+#10983 = PCURVE('',#10754,#10984);+#10984 = DEFINITIONAL_REPRESENTATION('',(#10985),#10989);+#10985 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10986,#10987,#10988),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10986 = CARTESIAN_POINT('',(0.216655197116,9.434349038036E-02));+#10987 = CARTESIAN_POINT('',(0.216655197116,4.667934701492E-02));+#10988 = CARTESIAN_POINT('',(0.192626166163,2.048376409093E-02));+#10989 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10990 = PCURVE('',#3390,#10991);+#10991 = DEFINITIONAL_REPRESENTATION('',(#10992),#10996);+#10992 = LINE('',#10993,#10994);+#10993 = CARTESIAN_POINT('',(0.,-0.1));+#10994 = VECTOR('',#10995,1.);+#10995 = DIRECTION('',(1.,0.));+#10996 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10997 = ORIENTED_EDGE('',*,*,#10998,.T.);+#10998 = EDGE_CURVE('',#10976,#10999,#11001,.T.);+#10999 = VERTEX_POINT('',#11000);+#11000 = CARTESIAN_POINT('',(0.610770696596,-0.145355941338,1.7000001));+#11001 = SURFACE_CURVE('',#11002,(#11006,#11013),.PCURVE_S1.);+#11002 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11003,#11004,#11005),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11003 = CARTESIAN_POINT('',(0.678327726242,-0.119160358414,1.7000001));+#11004 = CARTESIAN_POINT('',(0.654298695289,-0.145355941338,1.7000001));+#11005 = CARTESIAN_POINT('',(0.610770696596,-0.145355941338,1.7000001));+#11006 = PCURVE('',#10754,#11007);+#11007 = DEFINITIONAL_REPRESENTATION('',(#11008),#11012);+#11008 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11009,#11010,#11011),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11009 = CARTESIAN_POINT('',(0.192626166163,2.048376409093E-02));+#11010 = CARTESIAN_POINT('',(0.16859713521,-5.711818833049E-03));+#11011 = CARTESIAN_POINT('',(0.125069136517,-5.711818833049E-03));+#11012 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11013 = PCURVE('',#3351,#11014);+#11014 = DEFINITIONAL_REPRESENTATION('',(#11015),#11019);+#11015 = LINE('',#11016,#11017);+#11016 = CARTESIAN_POINT('',(0.,-0.1));+#11017 = VECTOR('',#11018,1.);+#11018 = DIRECTION('',(1.,0.));+#11019 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11020 = ORIENTED_EDGE('',*,*,#11021,.T.);+#11021 = EDGE_CURVE('',#10999,#11022,#11024,.T.);+#11022 = VERTEX_POINT('',#11023);+#11023 = CARTESIAN_POINT('',(0.535729214686,-0.108623037463,1.7000001));+#11024 = SURFACE_CURVE('',#11025,(#11029,#11036),.PCURVE_S1.);+#11025 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11026,#11027,#11028),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11026 = CARTESIAN_POINT('',(0.610770696596,-0.145355941338,1.7000001));+#11027 = CARTESIAN_POINT('',(0.559561286369,-0.145355941338,1.7000001));+#11028 = CARTESIAN_POINT('',(0.535729214686,-0.108623037463,1.7000001));+#11029 = PCURVE('',#10754,#11030);+#11030 = DEFINITIONAL_REPRESENTATION('',(#11031),#11035);+#11031 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11032,#11033,#11034),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11032 = CARTESIAN_POINT('',(0.125069136517,-5.711818833049E-03));+#11033 = CARTESIAN_POINT('',(7.385972628942E-02,-5.711818833049E-03));+#11034 = CARTESIAN_POINT('',(5.00276546067E-02,3.102108504156E-02));+#11035 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11036 = PCURVE('',#3306,#11037);+#11037 = DEFINITIONAL_REPRESENTATION('',(#11038),#11042);+#11038 = LINE('',#11039,#11040);+#11039 = CARTESIAN_POINT('',(0.,-0.1));+#11040 = VECTOR('',#11041,1.);+#11041 = DIRECTION('',(1.,0.));+#11042 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11043 = ORIENTED_EDGE('',*,*,#11044,.T.);+#11044 = EDGE_CURVE('',#11022,#11045,#11047,.T.);+#11045 = VERTEX_POINT('',#11046);+#11046 = CARTESIAN_POINT('',(0.511897143003,7.090533723785E-03,1.7000001+ ));+#11047 = SURFACE_CURVE('',#11048,(#11052,#11059),.PCURVE_S1.);+#11048 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11049,#11050,#11051),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11049 = CARTESIAN_POINT('',(0.535729214686,-0.108623037463,1.7000001));+#11050 = CARTESIAN_POINT('',(0.511897143003,-7.189013358837E-02,+ 1.7000001));+#11051 = CARTESIAN_POINT('',(0.511897143003,7.090533723785E-03,1.7000001+ ));+#11052 = PCURVE('',#10754,#11053);+#11053 = DEFINITIONAL_REPRESENTATION('',(#11054),#11058);+#11054 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11055,#11056,#11057),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11055 = CARTESIAN_POINT('',(5.00276546067E-02,3.102108504156E-02));+#11056 = CARTESIAN_POINT('',(2.619558292398E-02,6.775398891617E-02));+#11057 = CARTESIAN_POINT('',(2.619558292398E-02,0.146734656228));+#11058 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11059 = PCURVE('',#3264,#11060);+#11060 = DEFINITIONAL_REPRESENTATION('',(#11061),#11065);+#11061 = LINE('',#11062,#11063);+#11062 = CARTESIAN_POINT('',(0.,-0.1));+#11063 = VECTOR('',#11064,1.);+#11064 = DIRECTION('',(1.,0.));+#11065 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11066 = ORIENTED_EDGE('',*,*,#11067,.T.);+#11067 = EDGE_CURVE('',#11045,#11068,#11070,.T.);+#11068 = VERTEX_POINT('',#11069);+#11069 = CARTESIAN_POINT('',(0.540554716804,0.120637552939,1.7000001));+#11070 = SURFACE_CURVE('',#11071,(#11075,#11082),.PCURVE_S1.);+#11071 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11072,#11073,#11074),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11072 = CARTESIAN_POINT('',(0.511897143003,7.090533723785E-03,1.7000001+ ));+#11073 = CARTESIAN_POINT('',(0.511897143003,8.154113782353E-02,1.7000001+ ));+#11074 = CARTESIAN_POINT('',(0.540554716804,0.120637552939,1.7000001));+#11075 = PCURVE('',#10754,#11076);+#11076 = DEFINITIONAL_REPRESENTATION('',(#11077),#11081);+#11077 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11078,#11079,#11080),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11078 = CARTESIAN_POINT('',(2.619558292398E-02,0.146734656228));+#11079 = CARTESIAN_POINT('',(2.619558292398E-02,0.221185260328));+#11080 = CARTESIAN_POINT('',(5.485315672428E-02,0.260281675444));+#11081 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11082 = PCURVE('',#3228,#11083);+#11083 = DEFINITIONAL_REPRESENTATION('',(#11084),#11088);+#11084 = LINE('',#11085,#11086);+#11085 = CARTESIAN_POINT('',(0.,-0.1));+#11086 = VECTOR('',#11087,1.);+#11087 = DIRECTION('',(1.,0.));+#11088 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11089 = ORIENTED_EDGE('',*,*,#11090,.T.);+#11090 = EDGE_CURVE('',#11068,#11091,#11093,.T.);+#11091 = VERTEX_POINT('',#11092);+#11092 = CARTESIAN_POINT('',(0.623573049153,0.159733968055,1.7000001));+#11093 = SURFACE_CURVE('',#11094,(#11098,#11105),.PCURVE_S1.);+#11094 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11095,#11096,#11097),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11095 = CARTESIAN_POINT('',(0.540554716804,0.120637552939,1.7000001));+#11096 = CARTESIAN_POINT('',(0.569212290604,0.159733968055,1.7000001));+#11097 = CARTESIAN_POINT('',(0.623573049153,0.159733968055,1.7000001));+#11098 = PCURVE('',#10754,#11099);+#11099 = DEFINITIONAL_REPRESENTATION('',(#11100),#11104);+#11100 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11101,#11102,#11103),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11101 = CARTESIAN_POINT('',(5.485315672428E-02,0.260281675444));+#11102 = CARTESIAN_POINT('',(8.351073052458E-02,0.29937809056));+#11103 = CARTESIAN_POINT('',(0.137871489074,0.29937809056));+#11104 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11105 = PCURVE('',#3189,#11106);+#11106 = DEFINITIONAL_REPRESENTATION('',(#11107),#11111);+#11107 = LINE('',#11108,#11109);+#11108 = CARTESIAN_POINT('',(0.,-0.1));+#11109 = VECTOR('',#11110,1.);+#11110 = DIRECTION('',(1.,0.));+#11111 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11112 = ORIENTED_EDGE('',*,*,#11113,.T.);+#11113 = EDGE_CURVE('',#11091,#11114,#11116,.T.);+#11114 = VERTEX_POINT('',#11115);+#11115 = CARTESIAN_POINT('',(0.652723021128,0.156681099369,1.7000001));+#11116 = SURFACE_CURVE('',#11117,(#11121,#11128),.PCURVE_S1.);+#11117 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11118,#11119,#11120),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11118 = CARTESIAN_POINT('',(0.623573049153,0.159733968055,1.7000001));+#11119 = CARTESIAN_POINT('',(0.638148035141,0.159733968055,1.7000001));+#11120 = CARTESIAN_POINT('',(0.652723021128,0.156681099369,1.7000001));+#11121 = PCURVE('',#10754,#11122);+#11122 = DEFINITIONAL_REPRESENTATION('',(#11123),#11127);+#11123 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11124,#11125,#11126),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11124 = CARTESIAN_POINT('',(0.137871489074,0.29937809056));+#11125 = CARTESIAN_POINT('',(0.152446475061,0.29937809056));+#11126 = CARTESIAN_POINT('',(0.167021461049,0.296325221873));+#11127 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11128 = PCURVE('',#3147,#11129);+#11129 = DEFINITIONAL_REPRESENTATION('',(#11130),#11134);+#11130 = LINE('',#11131,#11132);+#11131 = CARTESIAN_POINT('',(0.,-0.1));+#11132 = VECTOR('',#11133,1.);+#11133 = DIRECTION('',(1.,0.));+#11134 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11135 = ORIENTED_EDGE('',*,*,#11136,.T.);+#11136 = EDGE_CURVE('',#11114,#10791,#11137,.T.);+#11137 = SURFACE_CURVE('',#11138,(#11142,#11149),.PCURVE_S1.);+#11138 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11139,#11140,#11141),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11139 = CARTESIAN_POINT('',(0.652723021128,0.156681099369,1.7000001));+#11140 = CARTESIAN_POINT('',(0.667298007116,0.153628230682,1.7000001));+#11141 = CARTESIAN_POINT('',(0.680888196753,0.147916411849,1.7000001));+#11142 = PCURVE('',#10754,#11143);+#11143 = DEFINITIONAL_REPRESENTATION('',(#11144),#11148);+#11144 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11145,#11146,#11147),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11145 = CARTESIAN_POINT('',(0.167021461049,0.296325221873));+#11146 = CARTESIAN_POINT('',(0.181596447037,0.293272353187));+#11147 = CARTESIAN_POINT('',(0.195186636674,0.287560534353));+#11148 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11149 = PCURVE('',#3111,#11150);+#11150 = DEFINITIONAL_REPRESENTATION('',(#11151),#11155);+#11151 = LINE('',#11152,#11153);+#11152 = CARTESIAN_POINT('',(0.,-0.1));+#11153 = VECTOR('',#11154,1.);+#11154 = DIRECTION('',(1.,0.));+#11155 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11156 = FACE_BOUND('',#11157,.F.);+#11157 = EDGE_LOOP('',(#11158,#11190,#11220,#11250,#11280,#11310,#11340,+ #11370));+#11158 = ORIENTED_EDGE('',*,*,#11159,.T.);+#11159 = EDGE_CURVE('',#11160,#11162,#11164,.T.);+#11160 = VERTEX_POINT('',#11161);+#11161 = CARTESIAN_POINT('',(0.609982859516,2.363511241262E-02,1.7000001+ ));+#11162 = VERTEX_POINT('',#11163);+#11163 = CARTESIAN_POINT('',(0.570000127684,5.317900292839E-03,1.7000001+ ));+#11164 = SURFACE_CURVE('',#11165,(#11169,#11176),.PCURVE_S1.);+#11165 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11166,#11167,#11168),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11166 = CARTESIAN_POINT('',(0.609982859516,2.363511241262E-02,1.7000001+ ));+#11167 = CARTESIAN_POINT('',(0.584575113672,2.363511241262E-02,1.7000001+ ));+#11168 = CARTESIAN_POINT('',(0.570000127684,5.317900292839E-03,1.7000001+ ));+#11169 = PCURVE('',#10754,#11170);+#11170 = DEFINITIONAL_REPRESENTATION('',(#11171),#11175);+#11171 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11172,#11173,#11174),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11172 = CARTESIAN_POINT('',(0.124281299436,0.163279234917));+#11173 = CARTESIAN_POINT('',(9.887355359278E-02,0.163279234917));+#11174 = CARTESIAN_POINT('',(8.4298567605E-02,0.144962022797));+#11175 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11176 = PCURVE('',#11177,#11184);+#11177 = SURFACE_OF_LINEAR_EXTRUSION('',#11178,#11182);+#11178 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11179,#11180,#11181),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11179 = CARTESIAN_POINT('',(0.609982859516,2.363511241262E-02,1.8000001+ ));+#11180 = CARTESIAN_POINT('',(0.584575113672,2.363511241262E-02,1.8000001+ ));+#11181 = CARTESIAN_POINT('',(0.570000127684,5.317900292839E-03,1.8000001+ ));+#11182 = VECTOR('',#11183,1.);+#11183 = DIRECTION('',(0.,0.,1.));+#11184 = DEFINITIONAL_REPRESENTATION('',(#11185),#11189);+#11185 = LINE('',#11186,#11187);+#11186 = CARTESIAN_POINT('',(0.,-0.1));+#11187 = VECTOR('',#11188,1.);+#11188 = DIRECTION('',(1.,0.));+#11189 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11190 = ORIENTED_EDGE('',*,*,#11191,.T.);+#11191 = EDGE_CURVE('',#11162,#11192,#11194,.T.);+#11192 = VERTEX_POINT('',#11193);+#11193 = CARTESIAN_POINT('',(0.555425141696,-4.530063212418E-02,+ 1.7000001));+#11194 = SURFACE_CURVE('',#11195,(#11199,#11206),.PCURVE_S1.);+#11195 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11196,#11197,#11198),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11196 = CARTESIAN_POINT('',(0.570000127684,5.317900292839E-03,1.7000001+ ));+#11197 = CARTESIAN_POINT('',(0.555425141696,-1.299931182694E-02,+ 1.7000001));+#11198 = CARTESIAN_POINT('',(0.555425141696,-4.530063212418E-02,+ 1.7000001));+#11199 = PCURVE('',#10754,#11200);+#11200 = DEFINITIONAL_REPRESENTATION('',(#11201),#11205);+#11201 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11202,#11203,#11204),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11202 = CARTESIAN_POINT('',(8.4298567605E-02,0.144962022797));+#11203 = CARTESIAN_POINT('',(6.972358161722E-02,0.126644810678));+#11204 = CARTESIAN_POINT('',(6.972358161722E-02,9.434349038036E-02));+#11205 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11206 = PCURVE('',#11207,#11214);+#11207 = SURFACE_OF_LINEAR_EXTRUSION('',#11208,#11212);+#11208 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11209,#11210,#11211),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11209 = CARTESIAN_POINT('',(0.570000127684,5.317900292839E-03,1.8000001+ ));+#11210 = CARTESIAN_POINT('',(0.555425141696,-1.299931182694E-02,+ 1.8000001));+#11211 = CARTESIAN_POINT('',(0.555425141696,-4.530063212418E-02,+ 1.8000001));+#11212 = VECTOR('',#11213,1.);+#11213 = DIRECTION('',(0.,0.,1.));+#11214 = DEFINITIONAL_REPRESENTATION('',(#11215),#11219);+#11215 = LINE('',#11216,#11217);+#11216 = CARTESIAN_POINT('',(0.,-0.1));+#11217 = VECTOR('',#11218,1.);+#11218 = DIRECTION('',(1.,0.));+#11219 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11220 = ORIENTED_EDGE('',*,*,#11221,.T.);+#11221 = EDGE_CURVE('',#11192,#11222,#11224,.T.);+#11222 = VERTEX_POINT('',#11223);+#11223 = CARTESIAN_POINT('',(0.570000127684,-9.59191645412E-02,1.7000001+ ));+#11224 = SURFACE_CURVE('',#11225,(#11229,#11236),.PCURVE_S1.);+#11225 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11226,#11227,#11228),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11226 = CARTESIAN_POINT('',(0.555425141696,-4.530063212418E-02,+ 1.7000001));+#11227 = CARTESIAN_POINT('',(0.555425141696,-7.760195242142E-02,+ 1.7000001));+#11228 = CARTESIAN_POINT('',(0.570000127684,-9.59191645412E-02,1.7000001+ ));+#11229 = PCURVE('',#10754,#11230);+#11230 = DEFINITIONAL_REPRESENTATION('',(#11231),#11235);+#11231 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11232,#11233,#11234),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11232 = CARTESIAN_POINT('',(6.972358161722E-02,9.434349038036E-02));+#11233 = CARTESIAN_POINT('',(6.972358161722E-02,6.204217008312E-02));+#11234 = CARTESIAN_POINT('',(8.4298567605E-02,4.372495796334E-02));+#11235 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11236 = PCURVE('',#11237,#11244);+#11237 = SURFACE_OF_LINEAR_EXTRUSION('',#11238,#11242);+#11238 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11239,#11240,#11241),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11239 = CARTESIAN_POINT('',(0.555425141696,-4.530063212418E-02,+ 1.8000001));+#11240 = CARTESIAN_POINT('',(0.555425141696,-7.760195242142E-02,+ 1.8000001));+#11241 = CARTESIAN_POINT('',(0.570000127684,-9.59191645412E-02,1.8000001+ ));+#11242 = VECTOR('',#11243,1.);+#11243 = DIRECTION('',(0.,0.,1.));+#11244 = DEFINITIONAL_REPRESENTATION('',(#11245),#11249);+#11245 = LINE('',#11246,#11247);+#11246 = CARTESIAN_POINT('',(0.,-0.1));+#11247 = VECTOR('',#11248,1.);+#11248 = DIRECTION('',(1.,0.));+#11249 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11250 = ORIENTED_EDGE('',*,*,#11251,.T.);+#11251 = EDGE_CURVE('',#11222,#11252,#11254,.T.);+#11252 = VERTEX_POINT('',#11253);+#11253 = CARTESIAN_POINT('',(0.609982859516,-0.114236376661,1.7000001));+#11254 = SURFACE_CURVE('',#11255,(#11259,#11266),.PCURVE_S1.);+#11255 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11256,#11257,#11258),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11256 = CARTESIAN_POINT('',(0.570000127684,-9.59191645412E-02,1.7000001+ ));+#11257 = CARTESIAN_POINT('',(0.584575113672,-0.114236376661,1.7000001));+#11258 = CARTESIAN_POINT('',(0.609982859516,-0.114236376661,1.7000001));+#11259 = PCURVE('',#10754,#11260);+#11260 = DEFINITIONAL_REPRESENTATION('',(#11261),#11265);+#11261 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11262,#11263,#11264),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11262 = CARTESIAN_POINT('',(8.4298567605E-02,4.372495796334E-02));+#11263 = CARTESIAN_POINT('',(9.887355359278E-02,2.540774584356E-02));+#11264 = CARTESIAN_POINT('',(0.124281299436,2.540774584356E-02));+#11265 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11266 = PCURVE('',#11267,#11274);+#11267 = SURFACE_OF_LINEAR_EXTRUSION('',#11268,#11272);+#11268 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11269,#11270,#11271),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11269 = CARTESIAN_POINT('',(0.570000127684,-9.59191645412E-02,1.8000001+ ));+#11270 = CARTESIAN_POINT('',(0.584575113672,-0.114236376661,1.8000001));+#11271 = CARTESIAN_POINT('',(0.609982859516,-0.114236376661,1.8000001));+#11272 = VECTOR('',#11273,1.);+#11273 = DIRECTION('',(0.,0.,1.));+#11274 = DEFINITIONAL_REPRESENTATION('',(#11275),#11279);+#11275 = LINE('',#11276,#11277);+#11276 = CARTESIAN_POINT('',(0.,-0.1));+#11277 = VECTOR('',#11278,1.);+#11278 = DIRECTION('',(1.,0.));+#11279 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11280 = ORIENTED_EDGE('',*,*,#11281,.T.);+#11281 = EDGE_CURVE('',#11252,#11282,#11284,.T.);+#11282 = VERTEX_POINT('',#11283);+#11283 = CARTESIAN_POINT('',(0.649768632077,-9.680548125667E-02,+ 1.7000001));+#11284 = SURFACE_CURVE('',#11285,(#11289,#11296),.PCURVE_S1.);+#11285 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11286,#11287,#11288),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11286 = CARTESIAN_POINT('',(0.609982859516,-0.114236376661,1.7000001));+#11287 = CARTESIAN_POINT('',(0.63637540171,-0.114236376661,1.7000001));+#11288 = CARTESIAN_POINT('',(0.649768632077,-9.680548125667E-02,+ 1.7000001));+#11289 = PCURVE('',#10754,#11290);+#11290 = DEFINITIONAL_REPRESENTATION('',(#11291),#11295);+#11291 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11292,#11293,#11294),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11292 = CARTESIAN_POINT('',(0.124281299436,2.540774584356E-02));+#11293 = CARTESIAN_POINT('',(0.15067384163,2.540774584356E-02));+#11294 = CARTESIAN_POINT('',(0.164067071998,4.283864124787E-02));+#11295 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11296 = PCURVE('',#11297,#11304);+#11297 = SURFACE_OF_LINEAR_EXTRUSION('',#11298,#11302);+#11298 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11299,#11300,#11301),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11299 = CARTESIAN_POINT('',(0.609982859516,-0.114236376661,1.8000001));+#11300 = CARTESIAN_POINT('',(0.63637540171,-0.114236376661,1.8000001));+#11301 = CARTESIAN_POINT('',(0.649768632077,-9.680548125667E-02,+ 1.8000001));+#11302 = VECTOR('',#11303,1.);+#11303 = DIRECTION('',(0.,0.,1.));+#11304 = DEFINITIONAL_REPRESENTATION('',(#11305),#11309);+#11305 = LINE('',#11306,#11307);+#11306 = CARTESIAN_POINT('',(0.,-0.1));+#11307 = VECTOR('',#11308,1.);+#11308 = DIRECTION('',(1.,0.));+#11309 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11310 = ORIENTED_EDGE('',*,*,#11311,.T.);+#11311 = EDGE_CURVE('',#11282,#11312,#11314,.T.);+#11312 = VERTEX_POINT('',#11313);+#11313 = CARTESIAN_POINT('',(0.663161862444,-4.530063212418E-02,+ 1.7000001));+#11314 = SURFACE_CURVE('',#11315,(#11319,#11326),.PCURVE_S1.);+#11315 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11316,#11317,#11318),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11316 = CARTESIAN_POINT('',(0.649768632077,-9.680548125667E-02,+ 1.7000001));+#11317 = CARTESIAN_POINT('',(0.663161862444,-7.937458585237E-02,+ 1.7000001));+#11318 = CARTESIAN_POINT('',(0.663161862444,-4.530063212418E-02,+ 1.7000001));+#11319 = PCURVE('',#10754,#11320);+#11320 = DEFINITIONAL_REPRESENTATION('',(#11321),#11325);+#11321 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11322,#11323,#11324),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11322 = CARTESIAN_POINT('',(0.164067071998,4.283864124787E-02));+#11323 = CARTESIAN_POINT('',(0.177460302365,6.026953665217E-02));+#11324 = CARTESIAN_POINT('',(0.177460302365,9.434349038036E-02));+#11325 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11326 = PCURVE('',#11327,#11334);+#11327 = SURFACE_OF_LINEAR_EXTRUSION('',#11328,#11332);+#11328 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11329,#11330,#11331),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11329 = CARTESIAN_POINT('',(0.649768632077,-9.680548125667E-02,+ 1.8000001));+#11330 = CARTESIAN_POINT('',(0.663161862444,-7.937458585237E-02,+ 1.8000001));+#11331 = CARTESIAN_POINT('',(0.663161862444,-4.530063212418E-02,+ 1.8000001));+#11332 = VECTOR('',#11333,1.);+#11333 = DIRECTION('',(0.,0.,1.));+#11334 = DEFINITIONAL_REPRESENTATION('',(#11335),#11339);+#11335 = LINE('',#11336,#11337);+#11336 = CARTESIAN_POINT('',(0.,-0.1));+#11337 = VECTOR('',#11338,1.);+#11338 = DIRECTION('',(1.,0.));+#11339 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11340 = ORIENTED_EDGE('',*,*,#11341,.T.);+#11341 = EDGE_CURVE('',#11312,#11342,#11344,.T.);+#11342 = VERTEX_POINT('',#11343);+#11343 = CARTESIAN_POINT('',(0.649768632077,6.302696643364E-03,1.7000001+ ));+#11344 = SURFACE_CURVE('',#11345,(#11349,#11356),.PCURVE_S1.);+#11345 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11346,#11347,#11348),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11346 = CARTESIAN_POINT('',(0.663161862444,-4.530063212418E-02,+ 1.7000001));+#11347 = CARTESIAN_POINT('',(0.663161862444,-1.102971912589E-02,+ 1.7000001));+#11348 = CARTESIAN_POINT('',(0.649768632077,6.302696643364E-03,1.7000001+ ));+#11349 = PCURVE('',#10754,#11350);+#11350 = DEFINITIONAL_REPRESENTATION('',(#11351),#11355);+#11351 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11352,#11353,#11354),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11352 = CARTESIAN_POINT('',(0.177460302365,9.434349038036E-02));+#11353 = CARTESIAN_POINT('',(0.177460302365,0.128614403379));+#11354 = CARTESIAN_POINT('',(0.164067071998,0.145946819148));+#11355 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11356 = PCURVE('',#11357,#11364);+#11357 = SURFACE_OF_LINEAR_EXTRUSION('',#11358,#11362);+#11358 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11359,#11360,#11361),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11359 = CARTESIAN_POINT('',(0.663161862444,-4.530063212418E-02,+ 1.8000001));+#11360 = CARTESIAN_POINT('',(0.663161862444,-1.102971912589E-02,+ 1.8000001));+#11361 = CARTESIAN_POINT('',(0.649768632077,6.302696643364E-03,1.8000001+ ));+#11362 = VECTOR('',#11363,1.);+#11363 = DIRECTION('',(0.,0.,1.));+#11364 = DEFINITIONAL_REPRESENTATION('',(#11365),#11369);+#11365 = LINE('',#11366,#11367);+#11366 = CARTESIAN_POINT('',(0.,-0.1));+#11367 = VECTOR('',#11368,1.);+#11368 = DIRECTION('',(1.,0.));+#11369 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11370 = ORIENTED_EDGE('',*,*,#11371,.T.);+#11371 = EDGE_CURVE('',#11342,#11160,#11372,.T.);+#11372 = SURFACE_CURVE('',#11373,(#11377,#11384),.PCURVE_S1.);+#11373 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11374,#11375,#11376),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11374 = CARTESIAN_POINT('',(0.649768632077,6.302696643364E-03,1.7000001+ ));+#11375 = CARTESIAN_POINT('',(0.63637540171,2.363511241262E-02,1.7000001)+ );+#11376 = CARTESIAN_POINT('',(0.609982859516,2.363511241262E-02,1.7000001+ ));+#11377 = PCURVE('',#10754,#11378);+#11378 = DEFINITIONAL_REPRESENTATION('',(#11379),#11383);+#11379 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11380,#11381,#11382),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11380 = CARTESIAN_POINT('',(0.164067071998,0.145946819148));+#11381 = CARTESIAN_POINT('',(0.15067384163,0.163279234917));+#11382 = CARTESIAN_POINT('',(0.124281299436,0.163279234917));+#11383 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11384 = PCURVE('',#11385,#11392);+#11385 = SURFACE_OF_LINEAR_EXTRUSION('',#11386,#11390);+#11386 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11387,#11388,#11389),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11387 = CARTESIAN_POINT('',(0.649768632077,6.302696643364E-03,1.8000001+ ));+#11388 = CARTESIAN_POINT('',(0.63637540171,2.363511241262E-02,1.8000001)+ );+#11389 = CARTESIAN_POINT('',(0.609982859516,2.363511241262E-02,1.8000001+ ));+#11390 = VECTOR('',#11391,1.);+#11391 = DIRECTION('',(0.,0.,1.));+#11392 = DEFINITIONAL_REPRESENTATION('',(#11393),#11397);+#11393 = LINE('',#11394,#11395);+#11394 = CARTESIAN_POINT('',(0.,-0.1));+#11395 = VECTOR('',#11396,1.);+#11396 = DIRECTION('',(1.,0.));+#11397 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11398 = ADVANCED_FACE('',(#11399),#11385,.T.);+#11399 = FACE_BOUND('',#11400,.T.);+#11400 = EDGE_LOOP('',(#11401,#11446,#11467,#11468));+#11401 = ORIENTED_EDGE('',*,*,#11402,.T.);+#11402 = EDGE_CURVE('',#11403,#11405,#11407,.T.);+#11403 = VERTEX_POINT('',#11404);+#11404 = CARTESIAN_POINT('',(0.609982859516,2.363511241262E-02,1.75));+#11405 = VERTEX_POINT('',#11406);+#11406 = CARTESIAN_POINT('',(0.649768632077,6.302696643364E-03,1.75));+#11407 = SURFACE_CURVE('',#11408,(#11417,#11429),.PCURVE_S1.);+#11408 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#11409,#11410,#11411,#11412,+ #11413,#11414,#11415,#11416),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,+ 0.729028607245,1.),.UNSPECIFIED.);+#11409 = CARTESIAN_POINT('',(0.609982859516,2.363511241262E-02,1.75));+#11410 = CARTESIAN_POINT('',(0.619599737072,2.363511241262E-02,1.75));+#11411 = CARTESIAN_POINT('',(0.628069184835,2.210094262864E-02,1.75));+#11412 = CARTESIAN_POINT('',(0.635387889349,1.903030463884E-02,1.75));+#11413 = CARTESIAN_POINT('',(0.643846994174,1.27118302343E-02,1.75));+#11414 = CARTESIAN_POINT('',(0.645980049442,1.078754268343E-02,1.75));+#11415 = CARTESIAN_POINT('',(0.64795393174,8.65113237337E-03,1.75));+#11416 = CARTESIAN_POINT('',(0.649768632077,6.302696643364E-03,1.75));+#11417 = PCURVE('',#11385,#11418);+#11418 = DEFINITIONAL_REPRESENTATION('',(#11419),#11428);+#11419 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#11420,#11421,#11422,#11423,+ #11424,#11425,#11426,#11427),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,+ 0.729028607245,1.),.UNSPECIFIED.);+#11420 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#11421 = CARTESIAN_POINT('',(0.817810700362,-5.00001E-02));+#11422 = CARTESIAN_POINT('',(0.635560824047,-5.00001E-02));+#11423 = CARTESIAN_POINT('',(0.453280486365,-5.00001E-02));+#11424 = CARTESIAN_POINT('',(0.203248478631,-5.00001E-02));+#11425 = CARTESIAN_POINT('',(0.13549693532,-5.00001E-02));+#11426 = CARTESIAN_POINT('',(6.774692464314E-02,-5.00001E-02));+#11427 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#11428 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11429 = PCURVE('',#11430,#11435);+#11430 = PLANE('',#11431);+#11431 = AXIS2_PLACEMENT_3D('',#11432,#11433,#11434);+#11432 = CARTESIAN_POINT('',(-1.680085640382,2.260171280765,1.75));+#11433 = DIRECTION('',(0.,0.,-1.));+#11434 = DIRECTION('',(0.596575959062,-0.802556617983,0.));+#11435 = DEFINITIONAL_REPRESENTATION('',(#11436),#11445);+#11436 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#11437,#11438,#11439,#11440,+ #11441,#11442,#11443,#11444),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,+ 0.729028607245,1.),.UNSPECIFIED.);+#11437 = CARTESIAN_POINT('',(3.161146714915,-0.503645920616));+#11438 = CARTESIAN_POINT('',(3.166883912866,-0.511364009343));+#11439 = CARTESIAN_POINT('',(3.173167839902,-0.517245971885));+#11440 = CARTESIAN_POINT('',(3.179998363906,-0.521287777825));+#11441 = CARTESIAN_POINT('',(3.190115795929,-0.524307238456));+#11442 = CARTESIAN_POINT('',(3.19293267513,-0.524871152387));+#11443 = CARTESIAN_POINT('',(3.195824836088,-0.525180773659));+#11444 = CARTESIAN_POINT('',(3.198792195319,-0.525236153126));+#11445 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11446 = ORIENTED_EDGE('',*,*,#11447,.T.);+#11447 = EDGE_CURVE('',#11405,#11342,#11448,.T.);+#11448 = SURFACE_CURVE('',#11449,(#11453,#11460),.PCURVE_S1.);+#11449 = LINE('',#11450,#11451);+#11450 = CARTESIAN_POINT('',(0.649768632077,6.302696643364E-03,1.8000001+ ));+#11451 = VECTOR('',#11452,1.);+#11452 = DIRECTION('',(-0.,-0.,-1.));+#11453 = PCURVE('',#11385,#11454);+#11454 = DEFINITIONAL_REPRESENTATION('',(#11455),#11459);+#11455 = LINE('',#11456,#11457);+#11456 = CARTESIAN_POINT('',(0.,0.));+#11457 = VECTOR('',#11458,1.);+#11458 = DIRECTION('',(0.,-1.));+#11459 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11460 = PCURVE('',#11357,#11461);+#11461 = DEFINITIONAL_REPRESENTATION('',(#11462),#11466);+#11462 = LINE('',#11463,#11464);+#11463 = CARTESIAN_POINT('',(1.,0.));+#11464 = VECTOR('',#11465,1.);+#11465 = DIRECTION('',(0.,-1.));+#11466 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11467 = ORIENTED_EDGE('',*,*,#11371,.T.);+#11468 = ORIENTED_EDGE('',*,*,#11469,.F.);+#11469 = EDGE_CURVE('',#11403,#11160,#11470,.T.);+#11470 = SURFACE_CURVE('',#11471,(#11475,#11482),.PCURVE_S1.);+#11471 = LINE('',#11472,#11473);+#11472 = CARTESIAN_POINT('',(0.609982859516,2.363511241262E-02,1.8000001+ ));+#11473 = VECTOR('',#11474,1.);+#11474 = DIRECTION('',(-0.,-0.,-1.));+#11475 = PCURVE('',#11385,#11476);+#11476 = DEFINITIONAL_REPRESENTATION('',(#11477),#11481);+#11477 = LINE('',#11478,#11479);+#11478 = CARTESIAN_POINT('',(1.,0.));+#11479 = VECTOR('',#11480,1.);+#11480 = DIRECTION('',(0.,-1.));+#11481 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11482 = PCURVE('',#11177,#11483);+#11483 = DEFINITIONAL_REPRESENTATION('',(#11484),#11488);+#11484 = LINE('',#11485,#11486);+#11485 = CARTESIAN_POINT('',(0.,0.));+#11486 = VECTOR('',#11487,1.);+#11487 = DIRECTION('',(0.,-1.));+#11488 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11489 = ADVANCED_FACE('',(#11490),#11430,.F.);+#11490 = FACE_BOUND('',#11491,.F.);+#11491 = EDGE_LOOP('',(#11492,#11523,#11559,#11560,#11589,#11618,#11656,+ #11694));+#11492 = ORIENTED_EDGE('',*,*,#11493,.T.);+#11493 = EDGE_CURVE('',#11494,#11496,#11498,.T.);+#11494 = VERTEX_POINT('',#11495);+#11495 = CARTESIAN_POINT('',(0.555425141696,-4.530063212418E-02,1.75));+#11496 = VERTEX_POINT('',#11497);+#11497 = CARTESIAN_POINT('',(0.570000127684,5.317900292839E-03,1.75));+#11498 = SURFACE_CURVE('',#11499,(#11505,#11514),.PCURVE_S1.);+#11499 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#11500,#11501,#11502,#11503,+ #11504),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#11500 = CARTESIAN_POINT('',(0.555425141696,-4.530063212418E-02,1.75));+#11501 = CARTESIAN_POINT('',(0.555425141696,-2.916013171963E-02,1.75));+#11502 = CARTESIAN_POINT('',(0.557851248308,-1.533770536187E-02,1.75));+#11503 = CARTESIAN_POINT('',(0.562710022024,-3.843989253187E-03,1.75));+#11504 = CARTESIAN_POINT('',(0.570000127684,5.317900292838E-03,1.75));+#11505 = PCURVE('',#11430,#11506);+#11506 = DEFINITIONAL_REPRESENTATION('',(#11507),#11513);+#11507 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#11508,#11509,#11510,#11511,+ #11512),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#11508 = CARTESIAN_POINT('',(3.183923730077,-0.418734855207));+#11509 = CARTESIAN_POINT('',(3.170970064659,-0.428363889716));+#11510 = CARTESIAN_POINT('',(3.161324141788,-0.438557104894));+#11511 = CARTESIAN_POINT('',(3.154998411449,-0.449313420606));+#11512 = CARTESIAN_POINT('',(3.151994578137,-0.460629906192));+#11513 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11514 = PCURVE('',#11207,#11515);+#11515 = DEFINITIONAL_REPRESENTATION('',(#11516),#11522);+#11516 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#11517,#11518,#11519,#11520,+ #11521),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#11517 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#11518 = CARTESIAN_POINT('',(0.750157265152,-5.00001E-02));+#11519 = CARTESIAN_POINT('',(0.500164739344,-5.00001E-02));+#11520 = CARTESIAN_POINT('',(0.250089628436,-5.00001E-02));+#11521 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#11522 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11523 = ORIENTED_EDGE('',*,*,#11524,.T.);+#11524 = EDGE_CURVE('',#11496,#11403,#11525,.T.);+#11525 = SURFACE_CURVE('',#11526,(#11535,#11547),.PCURVE_S1.);+#11526 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#11527,#11528,#11529,#11530,+ #11531,#11532,#11533,#11534),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,+ 0.391984542872,1.),.UNSPECIFIED.);+#11527 = CARTESIAN_POINT('',(0.570000127684,5.317900292838E-03,1.75));+#11528 = CARTESIAN_POINT('',(0.572856560197,8.907741153061E-03,1.75));+#11529 = CARTESIAN_POINT('',(0.575990640091,1.202888550275E-02,1.75));+#11530 = CARTESIAN_POINT('',(0.57940235093,1.468097172374E-02,1.75));+#11531 = CARTESIAN_POINT('',(0.588813872497,2.024988209923E-02,1.75));+#11532 = CARTESIAN_POINT('',(0.595203785874,2.250707915542E-02,1.75));+#11533 = CARTESIAN_POINT('',(0.602260623669,2.363511241262E-02,1.75));+#11534 = CARTESIAN_POINT('',(0.609982859516,2.363511241262E-02,1.75));+#11535 = PCURVE('',#11430,#11536);+#11536 = DEFINITIONAL_REPRESENTATION('',(#11537),#11546);+#11537 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#11538,#11539,#11540,#11541,+ #11542,#11543,#11544,#11545),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,+ 0.391984542872,1.),.UNSPECIFIED.);+#11538 = CARTESIAN_POINT('',(3.151994578137,-0.460629906192));+#11539 = CARTESIAN_POINT('',(3.150817606562,-0.465063967763));+#11540 = CARTESIAN_POINT('',(3.150182428228,-0.469441244007));+#11541 = CARTESIAN_POINT('',(3.150089323545,-0.473761506));+#11542 = CARTESIAN_POINT('',(3.151234645174,-0.484637062967));+#11543 = CARTESIAN_POINT('',(3.153235185439,-0.491111919735));+#11544 = CARTESIAN_POINT('',(3.156539814659,-0.497448389131));+#11545 = CARTESIAN_POINT('',(3.161146714915,-0.503645920616));+#11546 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11547 = PCURVE('',#11177,#11548);+#11548 = DEFINITIONAL_REPRESENTATION('',(#11549),#11558);+#11549 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#11550,#11551,#11552,#11553,+ #11554,#11555,#11556,#11557),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,+ 0.391984542872,1.),.UNSPECIFIED.);+#11550 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#11551 = CARTESIAN_POINT('',(0.902009082039,-5.00001E-02));+#11552 = CARTESIAN_POINT('',(0.804009086653,-5.00001E-02));+#11553 = CARTESIAN_POINT('',(0.706004545891,-5.00001E-02));+#11554 = CARTESIAN_POINT('',(0.455983090522,-5.00001E-02));+#11555 = CARTESIAN_POINT('',(0.303966164082,-5.00001E-02));+#11556 = CARTESIAN_POINT('',(0.15196617391,-5.00001E-02));+#11557 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#11558 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11559 = ORIENTED_EDGE('',*,*,#11402,.T.);+#11560 = ORIENTED_EDGE('',*,*,#11561,.T.);+#11561 = EDGE_CURVE('',#11405,#11562,#11564,.T.);+#11562 = VERTEX_POINT('',#11563);+#11563 = CARTESIAN_POINT('',(0.663161862444,-4.530063212418E-02,1.75));+#11564 = SURFACE_CURVE('',#11565,(#11571,#11580),.PCURVE_S1.);+#11565 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#11566,#11567,#11568,#11569,+ #11570),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#11566 = CARTESIAN_POINT('',(0.649768632077,6.302696643364E-03,1.75));+#11567 = CARTESIAN_POINT('',(0.65646884993,-2.368173518945E-03,1.75));+#11568 = CARTESIAN_POINT('',(0.660933439159,-1.386385229897E-02,1.75));+#11569 = CARTESIAN_POINT('',(0.663161862444,-2.817968304998E-02,1.75));+#11570 = CARTESIAN_POINT('',(0.663161862444,-4.530063212418E-02,1.75));+#11571 = PCURVE('',#11430,#11572);+#11572 = DEFINITIONAL_REPRESENTATION('',(#11573),#11579);+#11573 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#11574,#11575,#11576,#11577,+ #11578),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#11574 = CARTESIAN_POINT('',(3.198792195319,-0.525236153126));+#11575 = CARTESIAN_POINT('',(3.209748248443,-0.525440624623));+#11576 = CARTESIAN_POINT('',(3.221637648127,-0.522165664662));+#11577 = CARTESIAN_POINT('',(3.234456336597,-0.515413620057));+#11578 = CARTESIAN_POINT('',(3.248196867583,-0.505199673443));+#11579 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11580 = PCURVE('',#11357,#11581);+#11581 = DEFINITIONAL_REPRESENTATION('',(#11582),#11588);+#11582 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#11583,#11584,#11585,#11586,+ #11587),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#11583 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#11584 = CARTESIAN_POINT('',(0.749865504101,-5.00001E-02));+#11585 = CARTESIAN_POINT('',(0.499769000377,-5.00001E-02));+#11586 = CARTESIAN_POINT('',(0.249788342013,-5.00001E-02));+#11587 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#11588 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11589 = ORIENTED_EDGE('',*,*,#11590,.T.);+#11590 = EDGE_CURVE('',#11562,#11591,#11593,.T.);+#11591 = VERTEX_POINT('',#11592);+#11592 = CARTESIAN_POINT('',(0.649768632077,-9.680548125667E-02,1.75));+#11593 = SURFACE_CURVE('',#11594,(#11600,#11609),.PCURVE_S1.);+#11594 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#11595,#11596,#11597,#11598,+ #11599),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#11595 = CARTESIAN_POINT('',(0.663161862444,-4.530063212418E-02,1.75));+#11596 = CARTESIAN_POINT('',(0.663161862444,-6.232352696389E-02,1.75));+#11597 = CARTESIAN_POINT('',(0.660933349443,-7.658997115934E-02,1.75));+#11598 = CARTESIAN_POINT('',(0.656468759213,-8.808546285092E-02,1.75));+#11599 = CARTESIAN_POINT('',(0.649768632077,-9.680548125667E-02,1.75));+#11600 = PCURVE('',#11430,#11601);+#11601 = DEFINITIONAL_REPRESENTATION('',(#11602),#11608);+#11602 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#11603,#11604,#11605,#11606,+ #11607),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#11603 = CARTESIAN_POINT('',(3.248196867583,-0.505199673443));+#11604 = CARTESIAN_POINT('',(3.261858704494,-0.495044223628));+#11605 = CARTESIAN_POINT('',(3.271978856417,-0.484744698143));+#11606 = CARTESIAN_POINT('',(3.278541172153,-0.474303677726));+#11607 = CARTESIAN_POINT('',(3.281542345861,-0.463724293008));+#11608 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11609 = PCURVE('',#11327,#11610);+#11610 = DEFINITIONAL_REPRESENTATION('',(#11611),#11617);+#11611 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#11612,#11613,#11614,#11615,+ #11616),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#11612 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#11613 = CARTESIAN_POINT('',(0.750206639131,-5.00001E-02));+#11614 = CARTESIAN_POINT('',(0.500225385748,-5.00001E-02));+#11615 = CARTESIAN_POINT('',(0.25013110926,-5.00001E-02));+#11616 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#11617 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11618 = ORIENTED_EDGE('',*,*,#11619,.T.);+#11619 = EDGE_CURVE('',#11591,#11620,#11622,.T.);+#11620 = VERTEX_POINT('',#11621);+#11621 = CARTESIAN_POINT('',(0.609982859516,-0.114236376661,1.75));+#11622 = SURFACE_CURVE('',#11623,(#11632,#11644),.PCURVE_S1.);+#11623 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#11624,#11625,#11626,#11627,+ #11628,#11629,#11630,#11631),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,+ 0.272971917547,1.),.UNSPECIFIED.);+#11624 = CARTESIAN_POINT('',(0.649768632077,-9.680548125667E-02,1.75));+#11625 = CARTESIAN_POINT('',(0.647940542517,-9.918468605151E-02,1.75));+#11626 = CARTESIAN_POINT('',(0.645950911106,-0.101347505575,1.75));+#11627 = CARTESIAN_POINT('',(0.64379974644,-0.103293838144,1.75));+#11628 = CARTESIAN_POINT('',(0.635327652038,-0.109630771318,1.75));+#11629 = CARTESIAN_POINT('',(0.628022732725,-0.112701939052,1.75));+#11630 = CARTESIAN_POINT('',(0.619573369276,-0.114236376661,1.75));+#11631 = CARTESIAN_POINT('',(0.609982859516,-0.114236376661,1.75));+#11632 = PCURVE('',#11430,#11633);+#11633 = DEFINITIONAL_REPRESENTATION('',(#11634),#11643);+#11634 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#11635,#11636,#11637,#11638,+ #11639,#11640,#11641,#11642),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,+ 0.272971917547,1.),.UNSPECIFIED.);+#11635 = CARTESIAN_POINT('',(3.281542345861,-0.463724293008));+#11636 = CARTESIAN_POINT('',(3.282361198132,-0.460837771251));+#11637 = CARTESIAN_POINT('',(3.282910016988,-0.457950693264));+#11638 = CARTESIAN_POINT('',(3.283188725947,-0.455063126605));+#11639 = CARTESIAN_POINT('',(3.283220225761,-0.444483329189));+#11640 = CARTESIAN_POINT('',(3.281327072506,-0.436788533015));+#11641 = CARTESIAN_POINT('',(3.277517858461,-0.429092031873));+#11642 = CARTESIAN_POINT('',(3.271796390902,-0.421395104794));+#11643 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11644 = PCURVE('',#11297,#11645);+#11645 = DEFINITIONAL_REPRESENTATION('',(#11646),#11655);+#11646 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#11647,#11648,#11649,#11650,+ #11651,#11652,#11653,#11654),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,+ 0.272971917547,1.),.UNSPECIFIED.);+#11647 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#11648 = CARTESIAN_POINT('',(0.931753224959,-5.00001E-02));+#11649 = CARTESIAN_POINT('',(0.863503233401,-5.00001E-02));+#11650 = CARTESIAN_POINT('',(0.795251624773,-5.00001E-02));+#11651 = CARTESIAN_POINT('',(0.545219953433,-5.00001E-02));+#11652 = CARTESIAN_POINT('',(0.36343978199,-5.00001E-02));+#11653 = CARTESIAN_POINT('',(0.181689768463,-5.00001E-02));+#11654 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#11655 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11656 = ORIENTED_EDGE('',*,*,#11657,.T.);+#11657 = EDGE_CURVE('',#11620,#11658,#11660,.T.);+#11658 = VERTEX_POINT('',#11659);+#11659 = CARTESIAN_POINT('',(0.570000127684,-9.59191645412E-02,1.75));+#11660 = SURFACE_CURVE('',#11661,(#11670,#11682),.PCURVE_S1.);+#11661 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#11662,#11663,#11664,#11665,+ #11666,#11667,#11668,#11669),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,+ 0.609015371284,1.),.UNSPECIFIED.);+#11662 = CARTESIAN_POINT('',(0.609982859516,-0.114236376661,1.75));+#11663 = CARTESIAN_POINT('',(0.602247924035,-0.114236376661,1.75));+#11664 = CARTESIAN_POINT('',(0.595180576973,-0.113104630131,1.75));+#11665 = CARTESIAN_POINT('',(0.588782352238,-0.110840000939,1.75));+#11666 = CARTESIAN_POINT('',(0.579376247529,-0.105261931179,1.75));+#11667 = CARTESIAN_POINT('',(0.575974652436,-0.102614223234,1.75));+#11668 = CARTESIAN_POINT('',(0.572849273717,-9.949984806837E-02,1.75));+#11669 = CARTESIAN_POINT('',(0.570000127684,-9.59191645412E-02,1.75));+#11670 = PCURVE('',#11430,#11671);+#11671 = DEFINITIONAL_REPRESENTATION('',(#11672),#11681);+#11672 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#11673,#11674,#11675,#11676,+ #11677,#11678,#11679,#11680),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,+ 0.609015371284,1.),.UNSPECIFIED.);+#11673 = CARTESIAN_POINT('',(3.271796390902,-0.421395104794));+#11674 = CARTESIAN_POINT('',(3.26718191435,-0.415187381135));+#11675 = CARTESIAN_POINT('',(3.26205741433,-0.41019060775));+#11676 = CARTESIAN_POINT('',(3.256422894128,-0.406406693478));+#11677 = CARTESIAN_POINT('',(3.246334721388,-0.402185504211));+#11678 = CARTESIAN_POINT('',(3.242180476,-0.401035090464));+#11679 = CARTESIAN_POINT('',(3.237816487793,-0.40038475844));+#11680 = CARTESIAN_POINT('',(3.233243054504,-0.400234307146));+#11681 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11682 = PCURVE('',#11267,#11683);+#11683 = DEFINITIONAL_REPRESENTATION('',(#11684),#11693);+#11684 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#11685,#11686,#11687,#11688,+ #11689,#11690,#11691,#11692),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,+ 0.609015371284,1.),.UNSPECIFIED.);+#11685 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#11686 = CARTESIAN_POINT('',(0.847783909517,-5.00001E-02));+#11687 = CARTESIAN_POINT('',(0.695533891474,-5.00001E-02));+#11688 = CARTESIAN_POINT('',(0.543266909264,-5.00001E-02));+#11689 = CARTESIAN_POINT('',(0.293245454234,-5.00001E-02));+#11690 = CARTESIAN_POINT('',(0.195490936627,-5.00001E-02));+#11691 = CARTESIAN_POINT('',(9.77409527103E-02,-5.00001E-02));+#11692 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#11693 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11694 = ORIENTED_EDGE('',*,*,#11695,.T.);+#11695 = EDGE_CURVE('',#11658,#11494,#11696,.T.);+#11696 = SURFACE_CURVE('',#11697,(#11703,#11712),.PCURVE_S1.);+#11697 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#11698,#11699,#11700,#11701,+ #11702),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#11698 = CARTESIAN_POINT('',(0.570000127684,-9.59191645412E-02,1.75));+#11699 = CARTESIAN_POINT('',(0.562710022023,-8.675727499446E-02,1.75));+#11700 = CARTESIAN_POINT('',(0.557851248309,-7.526355888644E-02,1.75));+#11701 = CARTESIAN_POINT('',(0.555425141696,-6.144113252887E-02,1.75));+#11702 = CARTESIAN_POINT('',(0.555425141696,-4.530063212418E-02,1.75));+#11703 = PCURVE('',#11430,#11704);+#11704 = DEFINITIONAL_REPRESENTATION('',(#11705),#11711);+#11705 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#11706,#11707,#11708,#11709,+ #11710),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#11706 = CARTESIAN_POINT('',(3.233243054504,-0.400234307146));+#11707 = CARTESIAN_POINT('',(3.221541017639,-0.399849347645));+#11708 = CARTESIAN_POINT('',(3.209418032123,-0.402806781355));+#11709 = CARTESIAN_POINT('',(3.196877395494,-0.409105820699));+#11710 = CARTESIAN_POINT('',(3.183923730077,-0.418734855207));+#11711 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11712 = PCURVE('',#11237,#11713);+#11713 = DEFINITIONAL_REPRESENTATION('',(#11714),#11720);+#11714 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#11715,#11716,#11717,#11718,+ #11719),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#11715 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#11716 = CARTESIAN_POINT('',(0.749910371545,-5.00001E-02));+#11717 = CARTESIAN_POINT('',(0.499835260661,-5.00001E-02));+#11718 = CARTESIAN_POINT('',(0.24984273485,-5.00001E-02));+#11719 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#11720 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11721 = ADVANCED_FACE('',(#11722),#11357,.T.);+#11722 = FACE_BOUND('',#11723,.T.);+#11723 = EDGE_LOOP('',(#11724,#11725,#11746,#11747));+#11724 = ORIENTED_EDGE('',*,*,#11561,.T.);+#11725 = ORIENTED_EDGE('',*,*,#11726,.T.);+#11726 = EDGE_CURVE('',#11562,#11312,#11727,.T.);+#11727 = SURFACE_CURVE('',#11728,(#11732,#11739),.PCURVE_S1.);+#11728 = LINE('',#11729,#11730);+#11729 = CARTESIAN_POINT('',(0.663161862444,-4.530063212418E-02,+ 1.8000001));+#11730 = VECTOR('',#11731,1.);+#11731 = DIRECTION('',(-0.,-0.,-1.));+#11732 = PCURVE('',#11357,#11733);+#11733 = DEFINITIONAL_REPRESENTATION('',(#11734),#11738);+#11734 = LINE('',#11735,#11736);+#11735 = CARTESIAN_POINT('',(0.,0.));+#11736 = VECTOR('',#11737,1.);+#11737 = DIRECTION('',(0.,-1.));+#11738 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11739 = PCURVE('',#11327,#11740);+#11740 = DEFINITIONAL_REPRESENTATION('',(#11741),#11745);+#11741 = LINE('',#11742,#11743);+#11742 = CARTESIAN_POINT('',(1.,0.));+#11743 = VECTOR('',#11744,1.);+#11744 = DIRECTION('',(0.,-1.));+#11745 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11746 = ORIENTED_EDGE('',*,*,#11341,.T.);+#11747 = ORIENTED_EDGE('',*,*,#11447,.F.);+#11748 = ADVANCED_FACE('',(#11749),#11327,.T.);+#11749 = FACE_BOUND('',#11750,.T.);+#11750 = EDGE_LOOP('',(#11751,#11752,#11773,#11774));+#11751 = ORIENTED_EDGE('',*,*,#11590,.T.);+#11752 = ORIENTED_EDGE('',*,*,#11753,.T.);+#11753 = EDGE_CURVE('',#11591,#11282,#11754,.T.);+#11754 = SURFACE_CURVE('',#11755,(#11759,#11766),.PCURVE_S1.);+#11755 = LINE('',#11756,#11757);+#11756 = CARTESIAN_POINT('',(0.649768632077,-9.680548125667E-02,+ 1.8000001));+#11757 = VECTOR('',#11758,1.);+#11758 = DIRECTION('',(-0.,-0.,-1.));+#11759 = PCURVE('',#11327,#11760);+#11760 = DEFINITIONAL_REPRESENTATION('',(#11761),#11765);+#11761 = LINE('',#11762,#11763);+#11762 = CARTESIAN_POINT('',(0.,0.));+#11763 = VECTOR('',#11764,1.);+#11764 = DIRECTION('',(0.,-1.));+#11765 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11766 = PCURVE('',#11297,#11767);+#11767 = DEFINITIONAL_REPRESENTATION('',(#11768),#11772);+#11768 = LINE('',#11769,#11770);+#11769 = CARTESIAN_POINT('',(1.,0.));+#11770 = VECTOR('',#11771,1.);+#11771 = DIRECTION('',(0.,-1.));+#11772 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11773 = ORIENTED_EDGE('',*,*,#11311,.T.);+#11774 = ORIENTED_EDGE('',*,*,#11726,.F.);+#11775 = ADVANCED_FACE('',(#11776),#11297,.T.);+#11776 = FACE_BOUND('',#11777,.T.);+#11777 = EDGE_LOOP('',(#11778,#11779,#11800,#11801));+#11778 = ORIENTED_EDGE('',*,*,#11619,.T.);+#11779 = ORIENTED_EDGE('',*,*,#11780,.T.);+#11780 = EDGE_CURVE('',#11620,#11252,#11781,.T.);+#11781 = SURFACE_CURVE('',#11782,(#11786,#11793),.PCURVE_S1.);+#11782 = LINE('',#11783,#11784);+#11783 = CARTESIAN_POINT('',(0.609982859516,-0.114236376661,1.8000001));+#11784 = VECTOR('',#11785,1.);+#11785 = DIRECTION('',(-0.,-0.,-1.));+#11786 = PCURVE('',#11297,#11787);+#11787 = DEFINITIONAL_REPRESENTATION('',(#11788),#11792);+#11788 = LINE('',#11789,#11790);+#11789 = CARTESIAN_POINT('',(0.,0.));+#11790 = VECTOR('',#11791,1.);+#11791 = DIRECTION('',(0.,-1.));+#11792 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11793 = PCURVE('',#11267,#11794);+#11794 = DEFINITIONAL_REPRESENTATION('',(#11795),#11799);+#11795 = LINE('',#11796,#11797);+#11796 = CARTESIAN_POINT('',(1.,0.));+#11797 = VECTOR('',#11798,1.);+#11798 = DIRECTION('',(0.,-1.));+#11799 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11800 = ORIENTED_EDGE('',*,*,#11281,.T.);+#11801 = ORIENTED_EDGE('',*,*,#11753,.F.);+#11802 = ADVANCED_FACE('',(#11803),#11267,.T.);+#11803 = FACE_BOUND('',#11804,.T.);+#11804 = EDGE_LOOP('',(#11805,#11806,#11827,#11828));+#11805 = ORIENTED_EDGE('',*,*,#11657,.T.);+#11806 = ORIENTED_EDGE('',*,*,#11807,.T.);+#11807 = EDGE_CURVE('',#11658,#11222,#11808,.T.);+#11808 = SURFACE_CURVE('',#11809,(#11813,#11820),.PCURVE_S1.);+#11809 = LINE('',#11810,#11811);+#11810 = CARTESIAN_POINT('',(0.570000127684,-9.59191645412E-02,1.8000001+ ));+#11811 = VECTOR('',#11812,1.);+#11812 = DIRECTION('',(-0.,-0.,-1.));+#11813 = PCURVE('',#11267,#11814);+#11814 = DEFINITIONAL_REPRESENTATION('',(#11815),#11819);+#11815 = LINE('',#11816,#11817);+#11816 = CARTESIAN_POINT('',(0.,0.));+#11817 = VECTOR('',#11818,1.);+#11818 = DIRECTION('',(0.,-1.));+#11819 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11820 = PCURVE('',#11237,#11821);+#11821 = DEFINITIONAL_REPRESENTATION('',(#11822),#11826);+#11822 = LINE('',#11823,#11824);+#11823 = CARTESIAN_POINT('',(1.,0.));+#11824 = VECTOR('',#11825,1.);+#11825 = DIRECTION('',(0.,-1.));+#11826 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11827 = ORIENTED_EDGE('',*,*,#11251,.T.);+#11828 = ORIENTED_EDGE('',*,*,#11780,.F.);+#11829 = ADVANCED_FACE('',(#11830),#11237,.T.);+#11830 = FACE_BOUND('',#11831,.T.);+#11831 = EDGE_LOOP('',(#11832,#11833,#11854,#11855));+#11832 = ORIENTED_EDGE('',*,*,#11695,.T.);+#11833 = ORIENTED_EDGE('',*,*,#11834,.T.);+#11834 = EDGE_CURVE('',#11494,#11192,#11835,.T.);+#11835 = SURFACE_CURVE('',#11836,(#11840,#11847),.PCURVE_S1.);+#11836 = LINE('',#11837,#11838);+#11837 = CARTESIAN_POINT('',(0.555425141696,-4.530063212418E-02,+ 1.8000001));+#11838 = VECTOR('',#11839,1.);+#11839 = DIRECTION('',(-0.,-0.,-1.));+#11840 = PCURVE('',#11237,#11841);+#11841 = DEFINITIONAL_REPRESENTATION('',(#11842),#11846);+#11842 = LINE('',#11843,#11844);+#11843 = CARTESIAN_POINT('',(0.,0.));+#11844 = VECTOR('',#11845,1.);+#11845 = DIRECTION('',(0.,-1.));+#11846 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11847 = PCURVE('',#11207,#11848);+#11848 = DEFINITIONAL_REPRESENTATION('',(#11849),#11853);+#11849 = LINE('',#11850,#11851);+#11850 = CARTESIAN_POINT('',(1.,0.));+#11851 = VECTOR('',#11852,1.);+#11852 = DIRECTION('',(0.,-1.));+#11853 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11854 = ORIENTED_EDGE('',*,*,#11221,.T.);+#11855 = ORIENTED_EDGE('',*,*,#11807,.F.);+#11856 = ADVANCED_FACE('',(#11857),#11207,.T.);+#11857 = FACE_BOUND('',#11858,.T.);+#11858 = EDGE_LOOP('',(#11859,#11860,#11881,#11882));+#11859 = ORIENTED_EDGE('',*,*,#11493,.T.);+#11860 = ORIENTED_EDGE('',*,*,#11861,.T.);+#11861 = EDGE_CURVE('',#11496,#11162,#11862,.T.);+#11862 = SURFACE_CURVE('',#11863,(#11867,#11874),.PCURVE_S1.);+#11863 = LINE('',#11864,#11865);+#11864 = CARTESIAN_POINT('',(0.570000127684,5.317900292839E-03,1.8000001+ ));+#11865 = VECTOR('',#11866,1.);+#11866 = DIRECTION('',(-0.,-0.,-1.));+#11867 = PCURVE('',#11207,#11868);+#11868 = DEFINITIONAL_REPRESENTATION('',(#11869),#11873);+#11869 = LINE('',#11870,#11871);+#11870 = CARTESIAN_POINT('',(0.,0.));+#11871 = VECTOR('',#11872,1.);+#11872 = DIRECTION('',(0.,-1.));+#11873 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11874 = PCURVE('',#11177,#11875);+#11875 = DEFINITIONAL_REPRESENTATION('',(#11876),#11880);+#11876 = LINE('',#11877,#11878);+#11877 = CARTESIAN_POINT('',(1.,0.));+#11878 = VECTOR('',#11879,1.);+#11879 = DIRECTION('',(0.,-1.));+#11880 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11881 = ORIENTED_EDGE('',*,*,#11191,.T.);+#11882 = ORIENTED_EDGE('',*,*,#11834,.F.);+#11883 = ADVANCED_FACE('',(#11884),#11177,.T.);+#11884 = FACE_BOUND('',#11885,.T.);+#11885 = EDGE_LOOP('',(#11886,#11887,#11888,#11889));+#11886 = ORIENTED_EDGE('',*,*,#11524,.T.);+#11887 = ORIENTED_EDGE('',*,*,#11469,.T.);+#11888 = ORIENTED_EDGE('',*,*,#11159,.T.);+#11889 = ORIENTED_EDGE('',*,*,#11861,.F.);+#11890 = ADVANCED_FACE('',(#11891),#3621,.T.);+#11891 = FACE_BOUND('',#11892,.T.);+#11892 = EDGE_LOOP('',(#11893,#11894,#11895,#11896));+#11893 = ORIENTED_EDGE('',*,*,#3595,.T.);+#11894 = ORIENTED_EDGE('',*,*,#10766,.T.);+#11895 = ORIENTED_EDGE('',*,*,#10837,.T.);+#11896 = ORIENTED_EDGE('',*,*,#11897,.F.);+#11897 = EDGE_CURVE('',#3560,#10838,#11898,.T.);+#11898 = SURFACE_CURVE('',#11899,(#11903,#11910),.PCURVE_S1.);+#11899 = LINE('',#11900,#11901);+#11900 = CARTESIAN_POINT('',(0.568030534983,9.77902776072E-02,1.8000001)+ );+#11901 = VECTOR('',#11902,1.);+#11902 = DIRECTION('',(-0.,-0.,-1.));+#11903 = PCURVE('',#3621,#11904);+#11904 = DEFINITIONAL_REPRESENTATION('',(#11905),#11909);+#11905 = LINE('',#11906,#11907);+#11906 = CARTESIAN_POINT('',(1.,0.));+#11907 = VECTOR('',#11908,1.);+#11908 = DIRECTION('',(0.,-1.));+#11909 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11910 = PCURVE('',#3579,#11911);+#11911 = DEFINITIONAL_REPRESENTATION('',(#11912),#11916);+#11912 = LINE('',#11913,#11914);+#11913 = CARTESIAN_POINT('',(0.,0.));+#11914 = VECTOR('',#11915,1.);+#11915 = DIRECTION('',(0.,-1.));+#11916 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11917 = ADVANCED_FACE('',(#11918),#3579,.T.);+#11918 = FACE_BOUND('',#11919,.T.);+#11919 = EDGE_LOOP('',(#11920,#11921,#11922,#11923));+#11920 = ORIENTED_EDGE('',*,*,#3559,.T.);+#11921 = ORIENTED_EDGE('',*,*,#11897,.T.);+#11922 = ORIENTED_EDGE('',*,*,#10860,.T.);+#11923 = ORIENTED_EDGE('',*,*,#11924,.F.);+#11924 = EDGE_CURVE('',#3524,#10861,#11925,.T.);+#11925 = SURFACE_CURVE('',#11926,(#11930,#11937),.PCURVE_S1.);+#11926 = LINE('',#11927,#11928);+#11927 = CARTESIAN_POINT('',(0.548531567243,1.398410817746E-02,1.8000001+ ));+#11928 = VECTOR('',#11929,1.);+#11929 = DIRECTION('',(-0.,-0.,-1.));+#11930 = PCURVE('',#3579,#11931);+#11931 = DEFINITIONAL_REPRESENTATION('',(#11932),#11936);+#11932 = LINE('',#11933,#11934);+#11933 = CARTESIAN_POINT('',(1.,0.));+#11934 = VECTOR('',#11935,1.);+#11935 = DIRECTION('',(0.,-1.));+#11936 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11937 = PCURVE('',#3543,#11938);+#11938 = DEFINITIONAL_REPRESENTATION('',(#11939),#11943);+#11939 = LINE('',#11940,#11941);+#11940 = CARTESIAN_POINT('',(0.,0.));+#11941 = VECTOR('',#11942,1.);+#11942 = DIRECTION('',(0.,-1.));+#11943 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11944 = ADVANCED_FACE('',(#11945),#3543,.T.);+#11945 = FACE_BOUND('',#11946,.T.);+#11946 = EDGE_LOOP('',(#11947,#11948,#11949,#11950));+#11947 = ORIENTED_EDGE('',*,*,#3523,.T.);+#11948 = ORIENTED_EDGE('',*,*,#11924,.T.);+#11949 = ORIENTED_EDGE('',*,*,#10883,.T.);+#11950 = ORIENTED_EDGE('',*,*,#11951,.F.);+#11951 = EDGE_CURVE('',#3488,#10884,#11952,.T.);+#11952 = SURFACE_CURVE('',#11953,(#11957,#11964),.PCURVE_S1.);+#11953 = LINE('',#11954,#11955);+#11954 = CARTESIAN_POINT('',(0.574727150167,4.42173561386E-02,1.8000001)+ );+#11955 = VECTOR('',#11956,1.);+#11956 = DIRECTION('',(-0.,-0.,-1.));+#11957 = PCURVE('',#3543,#11958);+#11958 = DEFINITIONAL_REPRESENTATION('',(#11959),#11963);+#11959 = LINE('',#11960,#11961);+#11960 = CARTESIAN_POINT('',(1.,0.));+#11961 = VECTOR('',#11962,1.);+#11962 = DIRECTION('',(0.,-1.));+#11963 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11964 = PCURVE('',#3507,#11965);+#11965 = DEFINITIONAL_REPRESENTATION('',(#11966),#11970);+#11966 = LINE('',#11967,#11968);+#11967 = CARTESIAN_POINT('',(0.,0.));+#11968 = VECTOR('',#11969,1.);+#11969 = DIRECTION('',(0.,-1.));+#11970 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11971 = ADVANCED_FACE('',(#11972),#3507,.T.);+#11972 = FACE_BOUND('',#11973,.T.);+#11973 = EDGE_LOOP('',(#11974,#11975,#11976,#11977));+#11974 = ORIENTED_EDGE('',*,*,#3487,.T.);+#11975 = ORIENTED_EDGE('',*,*,#11951,.T.);+#11976 = ORIENTED_EDGE('',*,*,#10906,.T.);+#11977 = ORIENTED_EDGE('',*,*,#11978,.F.);+#11978 = EDGE_CURVE('',#3443,#10907,#11979,.T.);+#11979 = SURFACE_CURVE('',#11980,(#11984,#11991),.PCURVE_S1.);+#11980 = LINE('',#11981,#11982);+#11981 = CARTESIAN_POINT('',(0.613134207837,5.475467708923E-02,1.8000001+ ));+#11982 = VECTOR('',#11983,1.);+#11983 = DIRECTION('',(-0.,-0.,-1.));+#11984 = PCURVE('',#3507,#11985);+#11985 = DEFINITIONAL_REPRESENTATION('',(#11986),#11990);+#11986 = LINE('',#11987,#11988);+#11987 = CARTESIAN_POINT('',(1.,0.));+#11988 = VECTOR('',#11989,1.);+#11989 = DIRECTION('',(0.,-1.));+#11990 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11991 = PCURVE('',#3468,#11992);+#11992 = DEFINITIONAL_REPRESENTATION('',(#11993),#11997);+#11993 = LINE('',#11994,#11995);+#11994 = CARTESIAN_POINT('',(0.,0.));+#11995 = VECTOR('',#11996,1.);+#11996 = DIRECTION('',(0.,-1.));+#11997 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11998 = ADVANCED_FACE('',(#11999),#3468,.T.);+#11999 = FACE_BOUND('',#12000,.T.);+#12000 = EDGE_LOOP('',(#12001,#12002,#12003,#12004));+#12001 = ORIENTED_EDGE('',*,*,#3442,.T.);+#12002 = ORIENTED_EDGE('',*,*,#11978,.T.);+#12003 = ORIENTED_EDGE('',*,*,#10929,.T.);+#12004 = ORIENTED_EDGE('',*,*,#12005,.F.);+#12005 = EDGE_CURVE('',#3407,#10930,#12006,.T.);+#12006 = SURFACE_CURVE('',#12007,(#12011,#12018),.PCURVE_S1.);+#12007 = LINE('',#12008,#12009);+#12008 = CARTESIAN_POINT('',(0.679017083687,2.86575738003E-02,1.8000001)+ );+#12009 = VECTOR('',#12010,1.);+#12010 = DIRECTION('',(-0.,-0.,-1.));+#12011 = PCURVE('',#3468,#12012);+#12012 = DEFINITIONAL_REPRESENTATION('',(#12013),#12017);+#12013 = LINE('',#12014,#12015);+#12014 = CARTESIAN_POINT('',(1.,0.));+#12015 = VECTOR('',#12016,1.);+#12016 = DIRECTION('',(0.,-1.));+#12017 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12018 = PCURVE('',#3426,#12019);+#12019 = DEFINITIONAL_REPRESENTATION('',(#12020),#12024);+#12020 = LINE('',#12021,#12022);+#12021 = CARTESIAN_POINT('',(0.,0.));+#12022 = VECTOR('',#12023,1.);+#12023 = DIRECTION('',(0.,-1.));+#12024 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12025 = ADVANCED_FACE('',(#12026),#3426,.T.);+#12026 = FACE_BOUND('',#12027,.T.);+#12027 = EDGE_LOOP('',(#12028,#12029,#12030,#12031));+#12028 = ORIENTED_EDGE('',*,*,#3406,.T.);+#12029 = ORIENTED_EDGE('',*,*,#12005,.T.);+#12030 = ORIENTED_EDGE('',*,*,#10952,.T.);+#12031 = ORIENTED_EDGE('',*,*,#12032,.F.);+#12032 = EDGE_CURVE('',#3371,#10953,#12033,.T.);+#12033 = SURFACE_CURVE('',#12034,(#12038,#12045),.PCURVE_S1.);+#12034 = LINE('',#12035,#12036);+#12035 = CARTESIAN_POINT('',(0.702356757195,-4.530063212418E-02,+ 1.8000001));+#12036 = VECTOR('',#12037,1.);+#12037 = DIRECTION('',(-0.,-0.,-1.));+#12038 = PCURVE('',#3426,#12039);+#12039 = DEFINITIONAL_REPRESENTATION('',(#12040),#12044);+#12040 = LINE('',#12041,#12042);+#12041 = CARTESIAN_POINT('',(1.,0.));+#12042 = VECTOR('',#12043,1.);+#12043 = DIRECTION('',(0.,-1.));+#12044 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12045 = PCURVE('',#3390,#12046);+#12046 = DEFINITIONAL_REPRESENTATION('',(#12047),#12051);+#12047 = LINE('',#12048,#12049);+#12048 = CARTESIAN_POINT('',(0.,0.));+#12049 = VECTOR('',#12050,1.);+#12050 = DIRECTION('',(0.,-1.));+#12051 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12052 = ADVANCED_FACE('',(#12053),#3390,.T.);+#12053 = FACE_BOUND('',#12054,.T.);+#12054 = EDGE_LOOP('',(#12055,#12056,#12057,#12058));+#12055 = ORIENTED_EDGE('',*,*,#3370,.T.);+#12056 = ORIENTED_EDGE('',*,*,#12032,.T.);+#12057 = ORIENTED_EDGE('',*,*,#10975,.T.);+#12058 = ORIENTED_EDGE('',*,*,#12059,.F.);+#12059 = EDGE_CURVE('',#3326,#10976,#12060,.T.);+#12060 = SURFACE_CURVE('',#12061,(#12065,#12072),.PCURVE_S1.);+#12061 = LINE('',#12062,#12063);+#12062 = CARTESIAN_POINT('',(0.678327726242,-0.119160358414,1.8000001));+#12063 = VECTOR('',#12064,1.);+#12064 = DIRECTION('',(-0.,-0.,-1.));+#12065 = PCURVE('',#3390,#12066);+#12066 = DEFINITIONAL_REPRESENTATION('',(#12067),#12071);+#12067 = LINE('',#12068,#12069);+#12068 = CARTESIAN_POINT('',(1.,0.));+#12069 = VECTOR('',#12070,1.);+#12070 = DIRECTION('',(0.,-1.));+#12071 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12072 = PCURVE('',#3351,#12073);+#12073 = DEFINITIONAL_REPRESENTATION('',(#12074),#12078);+#12074 = LINE('',#12075,#12076);+#12075 = CARTESIAN_POINT('',(0.,0.));+#12076 = VECTOR('',#12077,1.);+#12077 = DIRECTION('',(0.,-1.));+#12078 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12079 = ADVANCED_FACE('',(#12080),#3351,.T.);+#12080 = FACE_BOUND('',#12081,.T.);+#12081 = EDGE_LOOP('',(#12082,#12083,#12084,#12085));+#12082 = ORIENTED_EDGE('',*,*,#3325,.T.);+#12083 = ORIENTED_EDGE('',*,*,#12059,.T.);+#12084 = ORIENTED_EDGE('',*,*,#10998,.T.);+#12085 = ORIENTED_EDGE('',*,*,#12086,.F.);+#12086 = EDGE_CURVE('',#3281,#10999,#12087,.T.);+#12087 = SURFACE_CURVE('',#12088,(#12092,#12099),.PCURVE_S1.);+#12088 = LINE('',#12089,#12090);+#12089 = CARTESIAN_POINT('',(0.610770696596,-0.145355941338,1.8000001));+#12090 = VECTOR('',#12091,1.);+#12091 = DIRECTION('',(-0.,-0.,-1.));+#12092 = PCURVE('',#3351,#12093);+#12093 = DEFINITIONAL_REPRESENTATION('',(#12094),#12098);+#12094 = LINE('',#12095,#12096);+#12095 = CARTESIAN_POINT('',(1.,0.));+#12096 = VECTOR('',#12097,1.);+#12097 = DIRECTION('',(0.,-1.));+#12098 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12099 = PCURVE('',#3306,#12100);+#12100 = DEFINITIONAL_REPRESENTATION('',(#12101),#12105);+#12101 = LINE('',#12102,#12103);+#12102 = CARTESIAN_POINT('',(0.,0.));+#12103 = VECTOR('',#12104,1.);+#12104 = DIRECTION('',(0.,-1.));+#12105 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12106 = ADVANCED_FACE('',(#12107),#3306,.T.);+#12107 = FACE_BOUND('',#12108,.T.);+#12108 = EDGE_LOOP('',(#12109,#12110,#12111,#12112));+#12109 = ORIENTED_EDGE('',*,*,#3280,.T.);+#12110 = ORIENTED_EDGE('',*,*,#12086,.T.);+#12111 = ORIENTED_EDGE('',*,*,#11021,.T.);+#12112 = ORIENTED_EDGE('',*,*,#12113,.F.);+#12113 = EDGE_CURVE('',#3245,#11022,#12114,.T.);+#12114 = SURFACE_CURVE('',#12115,(#12119,#12126),.PCURVE_S1.);+#12115 = LINE('',#12116,#12117);+#12116 = CARTESIAN_POINT('',(0.535729214686,-0.108623037463,1.8000001));+#12117 = VECTOR('',#12118,1.);+#12118 = DIRECTION('',(-0.,-0.,-1.));+#12119 = PCURVE('',#3306,#12120);+#12120 = DEFINITIONAL_REPRESENTATION('',(#12121),#12125);+#12121 = LINE('',#12122,#12123);+#12122 = CARTESIAN_POINT('',(1.,0.));+#12123 = VECTOR('',#12124,1.);+#12124 = DIRECTION('',(0.,-1.));+#12125 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12126 = PCURVE('',#3264,#12127);+#12127 = DEFINITIONAL_REPRESENTATION('',(#12128),#12132);+#12128 = LINE('',#12129,#12130);+#12129 = CARTESIAN_POINT('',(0.,0.));+#12130 = VECTOR('',#12131,1.);+#12131 = DIRECTION('',(0.,-1.));+#12132 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12133 = ADVANCED_FACE('',(#12134),#3264,.T.);+#12134 = FACE_BOUND('',#12135,.T.);+#12135 = EDGE_LOOP('',(#12136,#12137,#12138,#12139));+#12136 = ORIENTED_EDGE('',*,*,#3244,.T.);+#12137 = ORIENTED_EDGE('',*,*,#12113,.T.);+#12138 = ORIENTED_EDGE('',*,*,#11044,.T.);+#12139 = ORIENTED_EDGE('',*,*,#12140,.F.);+#12140 = EDGE_CURVE('',#3209,#11045,#12141,.T.);+#12141 = SURFACE_CURVE('',#12142,(#12146,#12153),.PCURVE_S1.);+#12142 = LINE('',#12143,#12144);+#12143 = CARTESIAN_POINT('',(0.511897143003,7.090533723785E-03,1.8000001+ ));+#12144 = VECTOR('',#12145,1.);+#12145 = DIRECTION('',(-0.,-0.,-1.));+#12146 = PCURVE('',#3264,#12147);+#12147 = DEFINITIONAL_REPRESENTATION('',(#12148),#12152);+#12148 = LINE('',#12149,#12150);+#12149 = CARTESIAN_POINT('',(1.,0.));+#12150 = VECTOR('',#12151,1.);+#12151 = DIRECTION('',(0.,-1.));+#12152 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12153 = PCURVE('',#3228,#12154);+#12154 = DEFINITIONAL_REPRESENTATION('',(#12155),#12159);+#12155 = LINE('',#12156,#12157);+#12156 = CARTESIAN_POINT('',(0.,0.));+#12157 = VECTOR('',#12158,1.);+#12158 = DIRECTION('',(0.,-1.));+#12159 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12160 = ADVANCED_FACE('',(#12161),#3228,.T.);+#12161 = FACE_BOUND('',#12162,.T.);+#12162 = EDGE_LOOP('',(#12163,#12164,#12165,#12166));+#12163 = ORIENTED_EDGE('',*,*,#3208,.T.);+#12164 = ORIENTED_EDGE('',*,*,#12140,.T.);+#12165 = ORIENTED_EDGE('',*,*,#11067,.T.);+#12166 = ORIENTED_EDGE('',*,*,#12167,.F.);+#12167 = EDGE_CURVE('',#3164,#11068,#12168,.T.);+#12168 = SURFACE_CURVE('',#12169,(#12173,#12180),.PCURVE_S1.);+#12169 = LINE('',#12170,#12171);+#12170 = CARTESIAN_POINT('',(0.540554716804,0.120637552939,1.8000001));+#12171 = VECTOR('',#12172,1.);+#12172 = DIRECTION('',(-0.,-0.,-1.));+#12173 = PCURVE('',#3228,#12174);+#12174 = DEFINITIONAL_REPRESENTATION('',(#12175),#12179);+#12175 = LINE('',#12176,#12177);+#12176 = CARTESIAN_POINT('',(1.,0.));+#12177 = VECTOR('',#12178,1.);+#12178 = DIRECTION('',(0.,-1.));+#12179 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12180 = PCURVE('',#3189,#12181);+#12181 = DEFINITIONAL_REPRESENTATION('',(#12182),#12186);+#12182 = LINE('',#12183,#12184);+#12183 = CARTESIAN_POINT('',(0.,0.));+#12184 = VECTOR('',#12185,1.);+#12185 = DIRECTION('',(0.,-1.));+#12186 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12187 = ADVANCED_FACE('',(#12188),#3189,.T.);+#12188 = FACE_BOUND('',#12189,.T.);+#12189 = EDGE_LOOP('',(#12190,#12191,#12192,#12193));+#12190 = ORIENTED_EDGE('',*,*,#3163,.T.);+#12191 = ORIENTED_EDGE('',*,*,#12167,.T.);+#12192 = ORIENTED_EDGE('',*,*,#11090,.T.);+#12193 = ORIENTED_EDGE('',*,*,#12194,.F.);+#12194 = EDGE_CURVE('',#3128,#11091,#12195,.T.);+#12195 = SURFACE_CURVE('',#12196,(#12200,#12207),.PCURVE_S1.);+#12196 = LINE('',#12197,#12198);+#12197 = CARTESIAN_POINT('',(0.623573049153,0.159733968055,1.8000001));+#12198 = VECTOR('',#12199,1.);+#12199 = DIRECTION('',(-0.,-0.,-1.));+#12200 = PCURVE('',#3189,#12201);+#12201 = DEFINITIONAL_REPRESENTATION('',(#12202),#12206);+#12202 = LINE('',#12203,#12204);+#12203 = CARTESIAN_POINT('',(1.,0.));+#12204 = VECTOR('',#12205,1.);+#12205 = DIRECTION('',(0.,-1.));+#12206 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12207 = PCURVE('',#3147,#12208);+#12208 = DEFINITIONAL_REPRESENTATION('',(#12209),#12213);+#12209 = LINE('',#12210,#12211);+#12210 = CARTESIAN_POINT('',(0.,0.));+#12211 = VECTOR('',#12212,1.);+#12212 = DIRECTION('',(0.,-1.));+#12213 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12214 = ADVANCED_FACE('',(#12215),#3147,.T.);+#12215 = FACE_BOUND('',#12216,.T.);+#12216 = EDGE_LOOP('',(#12217,#12218,#12219,#12220));+#12217 = ORIENTED_EDGE('',*,*,#3127,.T.);+#12218 = ORIENTED_EDGE('',*,*,#12194,.T.);+#12219 = ORIENTED_EDGE('',*,*,#11113,.T.);+#12220 = ORIENTED_EDGE('',*,*,#12221,.F.);+#12221 = EDGE_CURVE('',#3092,#11114,#12222,.T.);+#12222 = SURFACE_CURVE('',#12223,(#12227,#12234),.PCURVE_S1.);+#12223 = LINE('',#12224,#12225);+#12224 = CARTESIAN_POINT('',(0.652723021128,0.156681099369,1.8000001));+#12225 = VECTOR('',#12226,1.);+#12226 = DIRECTION('',(-0.,-0.,-1.));+#12227 = PCURVE('',#3147,#12228);+#12228 = DEFINITIONAL_REPRESENTATION('',(#12229),#12233);+#12229 = LINE('',#12230,#12231);+#12230 = CARTESIAN_POINT('',(1.,0.));+#12231 = VECTOR('',#12232,1.);+#12232 = DIRECTION('',(0.,-1.));+#12233 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12234 = PCURVE('',#3111,#12235);+#12235 = DEFINITIONAL_REPRESENTATION('',(#12236),#12240);+#12236 = LINE('',#12237,#12238);+#12237 = CARTESIAN_POINT('',(0.,0.));+#12238 = VECTOR('',#12239,1.);+#12239 = DIRECTION('',(0.,-1.));+#12240 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12241 = ADVANCED_FACE('',(#12242),#3111,.T.);+#12242 = FACE_BOUND('',#12243,.T.);+#12243 = EDGE_LOOP('',(#12244,#12245,#12246,#12247));+#12244 = ORIENTED_EDGE('',*,*,#3091,.T.);+#12245 = ORIENTED_EDGE('',*,*,#12221,.T.);+#12246 = ORIENTED_EDGE('',*,*,#11136,.T.);+#12247 = ORIENTED_EDGE('',*,*,#12248,.F.);+#12248 = EDGE_CURVE('',#3065,#10791,#12249,.T.);+#12249 = SURFACE_CURVE('',#12250,(#12254,#12261),.PCURVE_S1.);+#12250 = LINE('',#12251,#12252);+#12251 = CARTESIAN_POINT('',(0.680888196753,0.147916411849,1.8000001));+#12252 = VECTOR('',#12253,1.);+#12253 = DIRECTION('',(-0.,-0.,-1.));+#12254 = PCURVE('',#3111,#12255);+#12255 = DEFINITIONAL_REPRESENTATION('',(#12256),#12260);+#12256 = LINE('',#12257,#12258);+#12257 = CARTESIAN_POINT('',(1.,0.));+#12258 = VECTOR('',#12259,1.);+#12259 = DIRECTION('',(0.,-1.));+#12260 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12261 = PCURVE('',#3080,#12262);+#12262 = DEFINITIONAL_REPRESENTATION('',(#12263),#12267);+#12263 = LINE('',#12264,#12265);+#12264 = CARTESIAN_POINT('',(0.,0.));+#12265 = VECTOR('',#12266,1.);+#12266 = DIRECTION('',(0.,-1.));+#12267 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12268 = ADVANCED_FACE('',(#12269),#3080,.T.);+#12269 = FACE_BOUND('',#12270,.T.);+#12270 = EDGE_LOOP('',(#12271,#12272,#12273,#12274));+#12271 = ORIENTED_EDGE('',*,*,#3064,.T.);+#12272 = ORIENTED_EDGE('',*,*,#12248,.T.);+#12273 = ORIENTED_EDGE('',*,*,#10790,.T.);+#12274 = ORIENTED_EDGE('',*,*,#12275,.F.);+#12275 = EDGE_CURVE('',#3029,#10793,#12276,.T.);+#12276 = SURFACE_CURVE('',#12277,(#12281,#12288),.PCURVE_S1.);+#12277 = LINE('',#12278,#12279);+#12278 = CARTESIAN_POINT('',(0.680888196753,0.111281987609,1.8000001));+#12279 = VECTOR('',#12280,1.);+#12280 = DIRECTION('',(-0.,-0.,-1.));+#12281 = PCURVE('',#3080,#12282);+#12282 = DEFINITIONAL_REPRESENTATION('',(#12283),#12287);+#12283 = LINE('',#12284,#12285);+#12284 = CARTESIAN_POINT('',(3.663442423955E-02,0.));+#12285 = VECTOR('',#12286,1.);+#12286 = DIRECTION('',(0.,-1.));+#12287 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12288 = PCURVE('',#3048,#12289);+#12289 = DEFINITIONAL_REPRESENTATION('',(#12290),#12294);+#12290 = LINE('',#12291,#12292);+#12291 = CARTESIAN_POINT('',(0.,0.));+#12292 = VECTOR('',#12293,1.);+#12293 = DIRECTION('',(0.,-1.));+#12294 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12295 = ADVANCED_FACE('',(#12296),#3048,.T.);+#12296 = FACE_BOUND('',#12297,.T.);+#12297 = EDGE_LOOP('',(#12298,#12299,#12300,#12301));+#12298 = ORIENTED_EDGE('',*,*,#3026,.T.);+#12299 = ORIENTED_EDGE('',*,*,#12275,.T.);+#12300 = ORIENTED_EDGE('',*,*,#10815,.T.);+#12301 = ORIENTED_EDGE('',*,*,#10715,.F.);+#12302 = ADVANCED_FACE('',(#12303),#3008,.T.);+#12303 = FACE_BOUND('',#12304,.T.);+#12304 = EDGE_LOOP('',(#12305,#12306,#12329,#12357));+#12305 = ORIENTED_EDGE('',*,*,#2990,.T.);+#12306 = ORIENTED_EDGE('',*,*,#12307,.T.);+#12307 = EDGE_CURVE('',#2629,#12308,#12310,.T.);+#12308 = VERTEX_POINT('',#12309);+#12309 = CARTESIAN_POINT('',(0.848303576343,0.154416067762,1.7000001));+#12310 = SURFACE_CURVE('',#12311,(#12315,#12322),.PCURVE_S1.);+#12311 = LINE('',#12312,#12313);+#12312 = CARTESIAN_POINT('',(0.848303576343,0.154416067762,1.8000001));+#12313 = VECTOR('',#12314,1.);+#12314 = DIRECTION('',(-0.,-0.,-1.));+#12315 = PCURVE('',#3008,#12316);+#12316 = DEFINITIONAL_REPRESENTATION('',(#12317),#12321);+#12317 = LINE('',#12318,#12319);+#12318 = CARTESIAN_POINT('',(0.,0.));+#12319 = VECTOR('',#12320,1.);+#12320 = DIRECTION('',(0.,-1.));+#12321 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12322 = PCURVE('',#2646,#12323);+#12323 = DEFINITIONAL_REPRESENTATION('',(#12324),#12328);+#12324 = LINE('',#12325,#12326);+#12325 = CARTESIAN_POINT('',(8.705599738647E-02,0.));+#12326 = VECTOR('',#12327,1.);+#12327 = DIRECTION('',(0.,-1.));+#12328 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12329 = ORIENTED_EDGE('',*,*,#12330,.T.);+#12330 = EDGE_CURVE('',#12308,#12331,#12333,.T.);+#12331 = VERTEX_POINT('',#12332);+#12332 = CARTESIAN_POINT('',(0.91783019869,0.134917100022,1.7000001));+#12333 = SURFACE_CURVE('',#12334,(#12338,#12345),.PCURVE_S1.);+#12334 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12335,#12336,#12337),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12335 = CARTESIAN_POINT('',(0.848303576343,0.154416067762,1.7000001));+#12336 = CARTESIAN_POINT('',(0.893407249197,0.154416067762,1.7000001));+#12337 = CARTESIAN_POINT('',(0.91783019869,0.134917100022,1.7000001));+#12338 = PCURVE('',#3008,#12339);+#12339 = DEFINITIONAL_REPRESENTATION('',(#12340),#12344);+#12340 = LINE('',#12341,#12342);+#12341 = CARTESIAN_POINT('',(0.,-0.1));+#12342 = VECTOR('',#12343,1.);+#12343 = DIRECTION('',(1.,0.));+#12344 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12345 = PCURVE('',#12346,#12351);+#12346 = PLANE('',#12347);+#12347 = AXIS2_PLACEMENT_3D('',#12348,#12349,#12350);+#12348 = CARTESIAN_POINT('',(0.728552340119,-0.139644122505,1.7000001));+#12349 = DIRECTION('',(0.,0.,1.));+#12350 = DIRECTION('',(1.,0.,0.));+#12351 = DEFINITIONAL_REPRESENTATION('',(#12352),#12356);+#12352 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12353,#12354,#12355),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12353 = CARTESIAN_POINT('',(0.119751236224,0.294060190267));+#12354 = CARTESIAN_POINT('',(0.164854909078,0.294060190267));+#12355 = CARTESIAN_POINT('',(0.189277858571,0.274561222527));+#12356 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12357 = ORIENTED_EDGE('',*,*,#12358,.F.);+#12358 = EDGE_CURVE('',#2946,#12331,#12359,.T.);+#12359 = SURFACE_CURVE('',#12360,(#12364,#12371),.PCURVE_S1.);+#12360 = LINE('',#12361,#12362);+#12361 = CARTESIAN_POINT('',(0.91783019869,0.134917100022,1.8000001));+#12362 = VECTOR('',#12363,1.);+#12363 = DIRECTION('',(-0.,-0.,-1.));+#12364 = PCURVE('',#3008,#12365);+#12365 = DEFINITIONAL_REPRESENTATION('',(#12366),#12370);+#12366 = LINE('',#12367,#12368);+#12367 = CARTESIAN_POINT('',(1.,0.));+#12368 = VECTOR('',#12369,1.);+#12369 = DIRECTION('',(0.,-1.));+#12370 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12371 = PCURVE('',#2971,#12372);+#12372 = DEFINITIONAL_REPRESENTATION('',(#12373),#12377);+#12373 = LINE('',#12374,#12375);+#12374 = CARTESIAN_POINT('',(0.,0.));+#12375 = VECTOR('',#12376,1.);+#12376 = DIRECTION('',(0.,-1.));+#12377 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12378 = ADVANCED_FACE('',(#12379,#12610,#12816),#12346,.T.);+#12379 = FACE_BOUND('',#12380,.F.);+#12380 = EDGE_LOOP('',(#12381,#12406,#12427,#12428,#12451,#12474,#12497,+ #12520,#12543,#12566,#12589));+#12381 = ORIENTED_EDGE('',*,*,#12382,.T.);+#12382 = EDGE_CURVE('',#12383,#12385,#12387,.T.);+#12383 = VERTEX_POINT('',#12384);+#12384 = CARTESIAN_POINT('',(0.761247578956,-0.139644122505,1.7000001));+#12385 = VERTEX_POINT('',#12386);+#12386 = CARTESIAN_POINT('',(0.761247578956,0.154416067762,1.7000001));+#12387 = SURFACE_CURVE('',#12388,(#12392,#12399),.PCURVE_S1.);+#12388 = LINE('',#12389,#12390);+#12389 = CARTESIAN_POINT('',(0.761247578956,-0.139644122505,1.7000001));+#12390 = VECTOR('',#12391,1.);+#12391 = DIRECTION('',(0.,1.,0.));+#12392 = PCURVE('',#12346,#12393);+#12393 = DEFINITIONAL_REPRESENTATION('',(#12394),#12398);+#12394 = LINE('',#12395,#12396);+#12395 = CARTESIAN_POINT('',(3.269523883745E-02,0.));+#12396 = VECTOR('',#12397,1.);+#12397 = DIRECTION('',(0.,1.));+#12398 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12399 = PCURVE('',#2673,#12400);+#12400 = DEFINITIONAL_REPRESENTATION('',(#12401),#12405);+#12401 = LINE('',#12402,#12403);+#12402 = CARTESIAN_POINT('',(0.,-0.1));+#12403 = VECTOR('',#12404,1.);+#12404 = DIRECTION('',(1.,0.));+#12405 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12406 = ORIENTED_EDGE('',*,*,#12407,.T.);+#12407 = EDGE_CURVE('',#12385,#12308,#12408,.T.);+#12408 = SURFACE_CURVE('',#12409,(#12413,#12420),.PCURVE_S1.);+#12409 = LINE('',#12410,#12411);+#12410 = CARTESIAN_POINT('',(0.761247578956,0.154416067762,1.7000001));+#12411 = VECTOR('',#12412,1.);+#12412 = DIRECTION('',(1.,0.,0.));+#12413 = PCURVE('',#12346,#12414);+#12414 = DEFINITIONAL_REPRESENTATION('',(#12415),#12419);+#12415 = LINE('',#12416,#12417);+#12416 = CARTESIAN_POINT('',(3.269523883745E-02,0.294060190267));+#12417 = VECTOR('',#12418,1.);+#12418 = DIRECTION('',(1.,0.));+#12419 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12420 = PCURVE('',#2646,#12421);+#12421 = DEFINITIONAL_REPRESENTATION('',(#12422),#12426);+#12422 = LINE('',#12423,#12424);+#12423 = CARTESIAN_POINT('',(0.,-0.1));+#12424 = VECTOR('',#12425,1.);+#12425 = DIRECTION('',(1.,0.));+#12426 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12427 = ORIENTED_EDGE('',*,*,#12330,.T.);+#12428 = ORIENTED_EDGE('',*,*,#12429,.T.);+#12429 = EDGE_CURVE('',#12331,#12430,#12432,.T.);+#12430 = VERTEX_POINT('',#12431);+#12431 = CARTESIAN_POINT('',(0.942253148183,7.976850439258E-02,1.7000001+ ));+#12432 = SURFACE_CURVE('',#12433,(#12437,#12444),.PCURVE_S1.);+#12433 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12434,#12435,#12436),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12434 = CARTESIAN_POINT('',(0.91783019869,0.134917100022,1.7000001));+#12435 = CARTESIAN_POINT('',(0.942253148183,0.115418132282,1.7000001));+#12436 = CARTESIAN_POINT('',(0.942253148183,7.976850439258E-02,1.7000001+ ));+#12437 = PCURVE('',#12346,#12438);+#12438 = DEFINITIONAL_REPRESENTATION('',(#12439),#12443);+#12439 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12440,#12441,#12442),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12440 = CARTESIAN_POINT('',(0.189277858571,0.274561222527));+#12441 = CARTESIAN_POINT('',(0.213700808064,0.255062254786));+#12442 = CARTESIAN_POINT('',(0.213700808064,0.219412626897));+#12443 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12444 = PCURVE('',#2971,#12445);+#12445 = DEFINITIONAL_REPRESENTATION('',(#12446),#12450);+#12446 = LINE('',#12447,#12448);+#12447 = CARTESIAN_POINT('',(0.,-0.1));+#12448 = VECTOR('',#12449,1.);+#12449 = DIRECTION('',(1.,0.));+#12450 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12451 = ORIENTED_EDGE('',*,*,#12452,.T.);+#12452 = EDGE_CURVE('',#12430,#12453,#12455,.T.);+#12453 = VERTEX_POINT('',#12454);+#12454 = CARTESIAN_POINT('',(0.929352315991,3.722530204987E-02,1.7000001+ ));+#12455 = SURFACE_CURVE('',#12456,(#12460,#12467),.PCURVE_S1.);+#12456 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12457,#12458,#12459),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12457 = CARTESIAN_POINT('',(0.942253148183,7.976850439258E-02,1.7000001+ ));+#12458 = CARTESIAN_POINT('',(0.942253148183,5.278508438818E-02,1.7000001+ ));+#12459 = CARTESIAN_POINT('',(0.929352315991,3.722530204987E-02,1.7000001+ ));+#12460 = PCURVE('',#12346,#12461);+#12461 = DEFINITIONAL_REPRESENTATION('',(#12462),#12466);+#12462 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12463,#12464,#12465),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12463 = CARTESIAN_POINT('',(0.213700808064,0.219412626897));+#12464 = CARTESIAN_POINT('',(0.213700808064,0.192429206893));+#12465 = CARTESIAN_POINT('',(0.200799975872,0.176869424554));+#12466 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12467 = PCURVE('',#2929,#12468);+#12468 = DEFINITIONAL_REPRESENTATION('',(#12469),#12473);+#12469 = LINE('',#12470,#12471);+#12470 = CARTESIAN_POINT('',(0.,-0.1));+#12471 = VECTOR('',#12472,1.);+#12472 = DIRECTION('',(1.,0.));+#12473 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12474 = ORIENTED_EDGE('',*,*,#12475,.T.);+#12475 = EDGE_CURVE('',#12453,#12476,#12478,.T.);+#12476 = VERTEX_POINT('',#12477);+#12477 = CARTESIAN_POINT('',(0.890649819415,1.772633430946E-02,1.7000001+ ));+#12478 = SURFACE_CURVE('',#12479,(#12483,#12490),.PCURVE_S1.);+#12479 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12480,#12481,#12482),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12480 = CARTESIAN_POINT('',(0.929352315991,3.722530204987E-02,1.7000001+ ));+#12481 = CARTESIAN_POINT('',(0.916451483799,2.166551971156E-02,1.7000001+ ));+#12482 = CARTESIAN_POINT('',(0.890649819415,1.772633430946E-02,1.7000001+ ));+#12483 = PCURVE('',#12346,#12484);+#12484 = DEFINITIONAL_REPRESENTATION('',(#12485),#12489);+#12485 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12486,#12487,#12488),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12486 = CARTESIAN_POINT('',(0.200799975872,0.176869424554));+#12487 = CARTESIAN_POINT('',(0.18789914368,0.161309642216));+#12488 = CARTESIAN_POINT('',(0.162097479297,0.157370456814));+#12489 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12490 = PCURVE('',#2893,#12491);+#12491 = DEFINITIONAL_REPRESENTATION('',(#12492),#12496);+#12492 = LINE('',#12493,#12494);+#12493 = CARTESIAN_POINT('',(0.,-0.1));+#12494 = VECTOR('',#12495,1.);+#12495 = DIRECTION('',(1.,0.));+#12496 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12497 = ORIENTED_EDGE('',*,*,#12498,.T.);+#12498 = EDGE_CURVE('',#12476,#12499,#12501,.T.);+#12499 = VERTEX_POINT('',#12500);+#12500 = CARTESIAN_POINT('',(0.936048931175,-6.992054088732E-03,+ 1.7000001));+#12501 = SURFACE_CURVE('',#12502,(#12506,#12513),.PCURVE_S1.);+#12502 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12503,#12504,#12505),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12503 = CARTESIAN_POINT('',(0.890649819415,1.772633430946E-02,1.7000001+ ));+#12504 = CARTESIAN_POINT('',(0.919602832121,1.339323036715E-02,1.7000001+ ));+#12505 = CARTESIAN_POINT('',(0.936048931175,-6.992054088732E-03,+ 1.7000001));+#12506 = PCURVE('',#12346,#12507);+#12507 = DEFINITIONAL_REPRESENTATION('',(#12508),#12512);+#12508 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12509,#12510,#12511),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12509 = CARTESIAN_POINT('',(0.162097479297,0.157370456814));+#12510 = CARTESIAN_POINT('',(0.191050492002,0.153037352872));+#12511 = CARTESIAN_POINT('',(0.207496591056,0.132652068416));+#12512 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12513 = PCURVE('',#2854,#12514);+#12514 = DEFINITIONAL_REPRESENTATION('',(#12515),#12519);+#12515 = LINE('',#12516,#12517);+#12516 = CARTESIAN_POINT('',(0.,-0.1));+#12517 = VECTOR('',#12518,1.);+#12518 = DIRECTION('',(1.,0.));+#12519 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12520 = ORIENTED_EDGE('',*,*,#12521,.T.);+#12521 = EDGE_CURVE('',#12499,#12522,#12524,.T.);+#12522 = VERTEX_POINT('',#12523);+#12523 = CARTESIAN_POINT('',(0.952495030228,-5.889082176143E-02,+ 1.7000001));+#12524 = SURFACE_CURVE('',#12525,(#12529,#12536),.PCURVE_S1.);+#12525 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12526,#12527,#12528),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12526 = CARTESIAN_POINT('',(0.936048931175,-6.992054088732E-03,+ 1.7000001));+#12527 = CARTESIAN_POINT('',(0.952495030228,-2.737733854461E-02,+ 1.7000001));+#12528 = CARTESIAN_POINT('',(0.952495030228,-5.889082176143E-02,+ 1.7000001));+#12529 = PCURVE('',#12346,#12530);+#12530 = DEFINITIONAL_REPRESENTATION('',(#12531),#12535);+#12531 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12532,#12533,#12534),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12532 = CARTESIAN_POINT('',(0.207496591056,0.132652068416));+#12533 = CARTESIAN_POINT('',(0.22394269011,0.11226678396));+#12534 = CARTESIAN_POINT('',(0.22394269011,8.07533007431E-02));+#12535 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12536 = PCURVE('',#2812,#12537);+#12537 = DEFINITIONAL_REPRESENTATION('',(#12538),#12542);+#12538 = LINE('',#12539,#12540);+#12539 = CARTESIAN_POINT('',(0.,-0.1));+#12540 = VECTOR('',#12541,1.);+#12541 = DIRECTION('',(1.,0.));+#12542 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12543 = ORIENTED_EDGE('',*,*,#12544,.T.);+#12544 = EDGE_CURVE('',#12522,#12545,#12547,.T.);+#12545 = VERTEX_POINT('',#12546);+#12546 = CARTESIAN_POINT('',(0.926299447304,-0.119258838049,1.7000001));+#12547 = SURFACE_CURVE('',#12548,(#12552,#12559),.PCURVE_S1.);+#12548 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12549,#12550,#12551),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12549 = CARTESIAN_POINT('',(0.952495030228,-5.889082176143E-02,+ 1.7000001));+#12550 = CARTESIAN_POINT('',(0.952495030228,-9.887355359278E-02,+ 1.7000001));+#12551 = CARTESIAN_POINT('',(0.926299447304,-0.119258838049,1.7000001));+#12552 = PCURVE('',#12346,#12553);+#12553 = DEFINITIONAL_REPRESENTATION('',(#12554),#12558);+#12554 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12555,#12556,#12557),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12555 = CARTESIAN_POINT('',(0.22394269011,8.07533007431E-02));+#12556 = CARTESIAN_POINT('',(0.22394269011,4.077056891176E-02));+#12557 = CARTESIAN_POINT('',(0.197747107186,2.038528445588E-02));+#12558 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12559 = PCURVE('',#2773,#12560);+#12560 = DEFINITIONAL_REPRESENTATION('',(#12561),#12565);+#12561 = LINE('',#12562,#12563);+#12562 = CARTESIAN_POINT('',(0.,-0.1));+#12563 = VECTOR('',#12564,1.);+#12564 = DIRECTION('',(1.,0.));+#12565 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12566 = ORIENTED_EDGE('',*,*,#12567,.T.);+#12567 = EDGE_CURVE('',#12545,#12568,#12570,.T.);+#12568 = VERTEX_POINT('',#12569);+#12569 = CARTESIAN_POINT('',(0.848303576343,-0.139644122505,1.7000001));+#12570 = SURFACE_CURVE('',#12571,(#12575,#12582),.PCURVE_S1.);+#12571 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12572,#12573,#12574),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12572 = CARTESIAN_POINT('',(0.926299447304,-0.119258838049,1.7000001));+#12573 = CARTESIAN_POINT('',(0.90010386438,-0.139644122505,1.7000001));+#12574 = CARTESIAN_POINT('',(0.848303576343,-0.139644122505,1.7000001));+#12575 = PCURVE('',#12346,#12576);+#12576 = DEFINITIONAL_REPRESENTATION('',(#12577),#12581);+#12577 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12578,#12579,#12580),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12578 = CARTESIAN_POINT('',(0.197747107186,2.038528445588E-02));+#12579 = CARTESIAN_POINT('',(0.171551524262,0.));+#12580 = CARTESIAN_POINT('',(0.119751236224,0.));+#12581 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12582 = PCURVE('',#2731,#12583);+#12583 = DEFINITIONAL_REPRESENTATION('',(#12584),#12588);+#12584 = LINE('',#12585,#12586);+#12585 = CARTESIAN_POINT('',(0.,-0.1));+#12586 = VECTOR('',#12587,1.);+#12587 = DIRECTION('',(1.,0.));+#12588 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12589 = ORIENTED_EDGE('',*,*,#12590,.T.);+#12590 = EDGE_CURVE('',#12568,#12383,#12591,.T.);+#12591 = SURFACE_CURVE('',#12592,(#12596,#12603),.PCURVE_S1.);+#12592 = LINE('',#12593,#12594);+#12593 = CARTESIAN_POINT('',(0.848303576343,-0.139644122505,1.7000001));+#12594 = VECTOR('',#12595,1.);+#12595 = DIRECTION('',(-1.,0.,0.));+#12596 = PCURVE('',#12346,#12597);+#12597 = DEFINITIONAL_REPRESENTATION('',(#12598),#12602);+#12598 = LINE('',#12599,#12600);+#12599 = CARTESIAN_POINT('',(0.119751236224,0.));+#12600 = VECTOR('',#12601,1.);+#12601 = DIRECTION('',(-1.,0.));+#12602 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12603 = PCURVE('',#2700,#12604);+#12604 = DEFINITIONAL_REPRESENTATION('',(#12605),#12609);+#12605 = LINE('',#12606,#12607);+#12606 = CARTESIAN_POINT('',(0.,-0.1));+#12607 = VECTOR('',#12608,1.);+#12608 = DIRECTION('',(1.,0.));+#12609 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12610 = FACE_BOUND('',#12611,.F.);+#12611 = EDGE_LOOP('',(#12612,#12642,#12670,#12698,#12728,#12758,#12788)+ );+#12612 = ORIENTED_EDGE('',*,*,#12613,.T.);+#12613 = EDGE_CURVE('',#12614,#12616,#12618,.T.);+#12614 = VERTEX_POINT('',#12615);+#12615 = CARTESIAN_POINT('',(0.848303576343,7.878370804205E-04,1.7000001+ ));+#12616 = VERTEX_POINT('',#12617);+#12617 = CARTESIAN_POINT('',(0.801230310788,7.878370804205E-04,1.7000001+ ));+#12618 = SURFACE_CURVE('',#12619,(#12623,#12630),.PCURVE_S1.);+#12619 = LINE('',#12620,#12621);+#12620 = CARTESIAN_POINT('',(0.848303576343,7.878370804205E-04,1.7000001+ ));+#12621 = VECTOR('',#12622,1.);+#12622 = DIRECTION('',(-1.,0.,0.));+#12623 = PCURVE('',#12346,#12624);+#12624 = DEFINITIONAL_REPRESENTATION('',(#12625),#12629);+#12625 = LINE('',#12626,#12627);+#12626 = CARTESIAN_POINT('',(0.119751236224,0.140431959585));+#12627 = VECTOR('',#12628,1.);+#12628 = DIRECTION('',(-1.,0.));+#12629 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12630 = PCURVE('',#12631,#12636);+#12631 = PLANE('',#12632);+#12632 = AXIS2_PLACEMENT_3D('',#12633,#12634,#12635);+#12633 = CARTESIAN_POINT('',(0.848303576343,7.878370804205E-04,1.8000001+ ));+#12634 = DIRECTION('',(0.,1.,0.));+#12635 = DIRECTION('',(-1.,0.,0.));+#12636 = DEFINITIONAL_REPRESENTATION('',(#12637),#12641);+#12637 = LINE('',#12638,#12639);+#12638 = CARTESIAN_POINT('',(0.,-0.1));+#12639 = VECTOR('',#12640,1.);+#12640 = DIRECTION('',(1.,0.));+#12641 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12642 = ORIENTED_EDGE('',*,*,#12643,.T.);+#12643 = EDGE_CURVE('',#12616,#12644,#12646,.T.);+#12644 = VERTEX_POINT('',#12645);+#12645 = CARTESIAN_POINT('',(0.801230310788,-0.106948883667,1.7000001));+#12646 = SURFACE_CURVE('',#12647,(#12651,#12658),.PCURVE_S1.);+#12647 = LINE('',#12648,#12649);+#12648 = CARTESIAN_POINT('',(0.801230310788,7.878370804205E-04,1.7000001+ ));+#12649 = VECTOR('',#12650,1.);+#12650 = DIRECTION('',(0.,-1.,0.));+#12651 = PCURVE('',#12346,#12652);+#12652 = DEFINITIONAL_REPRESENTATION('',(#12653),#12657);+#12653 = LINE('',#12654,#12655);+#12654 = CARTESIAN_POINT('',(7.267797066879E-02,0.140431959585));+#12655 = VECTOR('',#12656,1.);+#12656 = DIRECTION('',(0.,-1.));+#12657 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12658 = PCURVE('',#12659,#12664);+#12659 = PLANE('',#12660);+#12660 = AXIS2_PLACEMENT_3D('',#12661,#12662,#12663);+#12661 = CARTESIAN_POINT('',(0.801230310788,7.878370804205E-04,1.8000001+ ));+#12662 = DIRECTION('',(-1.,0.,0.));+#12663 = DIRECTION('',(0.,-1.,0.));+#12664 = DEFINITIONAL_REPRESENTATION('',(#12665),#12669);+#12665 = LINE('',#12666,#12667);+#12666 = CARTESIAN_POINT('',(0.,-0.1));+#12667 = VECTOR('',#12668,1.);+#12668 = DIRECTION('',(1.,0.));+#12669 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12670 = ORIENTED_EDGE('',*,*,#12671,.T.);+#12671 = EDGE_CURVE('',#12644,#12672,#12674,.T.);+#12672 = VERTEX_POINT('',#12673);+#12673 = CARTESIAN_POINT('',(0.848303576343,-0.106948883667,1.7000001));+#12674 = SURFACE_CURVE('',#12675,(#12679,#12686),.PCURVE_S1.);+#12675 = LINE('',#12676,#12677);+#12676 = CARTESIAN_POINT('',(0.801230310788,-0.106948883667,1.7000001));+#12677 = VECTOR('',#12678,1.);+#12678 = DIRECTION('',(1.,0.,0.));+#12679 = PCURVE('',#12346,#12680);+#12680 = DEFINITIONAL_REPRESENTATION('',(#12681),#12685);+#12681 = LINE('',#12682,#12683);+#12682 = CARTESIAN_POINT('',(7.267797066879E-02,3.269523883745E-02));+#12683 = VECTOR('',#12684,1.);+#12684 = DIRECTION('',(1.,0.));+#12685 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12686 = PCURVE('',#12687,#12692);+#12687 = PLANE('',#12688);+#12688 = AXIS2_PLACEMENT_3D('',#12689,#12690,#12691);+#12689 = CARTESIAN_POINT('',(0.801230310788,-0.106948883667,1.8000001));+#12690 = DIRECTION('',(0.,-1.,0.));+#12691 = DIRECTION('',(1.,0.,0.));+#12692 = DEFINITIONAL_REPRESENTATION('',(#12693),#12697);+#12693 = LINE('',#12694,#12695);+#12694 = CARTESIAN_POINT('',(0.,-0.1));+#12695 = VECTOR('',#12696,1.);+#12696 = DIRECTION('',(1.,0.));+#12697 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12698 = ORIENTED_EDGE('',*,*,#12699,.T.);+#12699 = EDGE_CURVE('',#12672,#12700,#12702,.T.);+#12700 = VERTEX_POINT('',#12701);+#12701 = CARTESIAN_POINT('',(0.897740353139,-9.483588855562E-02,+ 1.7000001));+#12702 = SURFACE_CURVE('',#12703,(#12707,#12714),.PCURVE_S1.);+#12703 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12704,#12705,#12706),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12704 = CARTESIAN_POINT('',(0.848303576343,-0.106948883667,1.7000001));+#12705 = CARTESIAN_POINT('',(0.882968407881,-0.106948883667,1.7000001));+#12706 = CARTESIAN_POINT('',(0.897740353139,-9.483588855562E-02,+ 1.7000001));+#12707 = PCURVE('',#12346,#12708);+#12708 = DEFINITIONAL_REPRESENTATION('',(#12709),#12713);+#12709 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12710,#12711,#12712),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12710 = CARTESIAN_POINT('',(0.119751236224,3.269523883745E-02));+#12711 = CARTESIAN_POINT('',(0.154416067762,3.269523883745E-02));+#12712 = CARTESIAN_POINT('',(0.16918801302,4.480823394892E-02));+#12713 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12714 = PCURVE('',#12715,#12722);+#12715 = SURFACE_OF_LINEAR_EXTRUSION('',#12716,#12720);+#12716 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12717,#12718,#12719),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12717 = CARTESIAN_POINT('',(0.848303576343,-0.106948883667,1.8000001));+#12718 = CARTESIAN_POINT('',(0.882968407881,-0.106948883667,1.8000001));+#12719 = CARTESIAN_POINT('',(0.897740353139,-9.483588855562E-02,+ 1.8000001));+#12720 = VECTOR('',#12721,1.);+#12721 = DIRECTION('',(0.,0.,1.));+#12722 = DEFINITIONAL_REPRESENTATION('',(#12723),#12727);+#12723 = LINE('',#12724,#12725);+#12724 = CARTESIAN_POINT('',(0.,-0.1));+#12725 = VECTOR('',#12726,1.);+#12726 = DIRECTION('',(1.,0.));+#12727 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12728 = ORIENTED_EDGE('',*,*,#12729,.T.);+#12729 = EDGE_CURVE('',#12700,#12730,#12732,.T.);+#12730 = VERTEX_POINT('',#12731);+#12731 = CARTESIAN_POINT('',(0.912512298397,-5.495163635933E-02,+ 1.7000001));+#12732 = SURFACE_CURVE('',#12733,(#12737,#12744),.PCURVE_S1.);+#12733 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12734,#12735,#12736),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12734 = CARTESIAN_POINT('',(0.897740353139,-9.483588855562E-02,+ 1.7000001));+#12735 = CARTESIAN_POINT('',(0.912512298397,-8.272289344416E-02,+ 1.7000001));+#12736 = CARTESIAN_POINT('',(0.912512298397,-5.495163635933E-02,+ 1.7000001));+#12737 = PCURVE('',#12346,#12738);+#12738 = DEFINITIONAL_REPRESENTATION('',(#12739),#12743);+#12739 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12740,#12741,#12742),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12740 = CARTESIAN_POINT('',(0.16918801302,4.480823394892E-02));+#12741 = CARTESIAN_POINT('',(0.183959958278,5.692122906038E-02));+#12742 = CARTESIAN_POINT('',(0.183959958278,8.469248614521E-02));+#12743 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12744 = PCURVE('',#12745,#12752);+#12745 = SURFACE_OF_LINEAR_EXTRUSION('',#12746,#12750);+#12746 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12747,#12748,#12749),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12747 = CARTESIAN_POINT('',(0.897740353139,-9.483588855562E-02,+ 1.8000001));+#12748 = CARTESIAN_POINT('',(0.912512298397,-8.272289344416E-02,+ 1.8000001));+#12749 = CARTESIAN_POINT('',(0.912512298397,-5.495163635933E-02,+ 1.8000001));+#12750 = VECTOR('',#12751,1.);+#12751 = DIRECTION('',(0.,0.,1.));+#12752 = DEFINITIONAL_REPRESENTATION('',(#12753),#12757);+#12753 = LINE('',#12754,#12755);+#12754 = CARTESIAN_POINT('',(0.,-0.1));+#12755 = VECTOR('',#12756,1.);+#12756 = DIRECTION('',(1.,0.));+#12757 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12758 = ORIENTED_EDGE('',*,*,#12759,.T.);+#12759 = EDGE_CURVE('',#12730,#12760,#12762,.T.);+#12760 = VERTEX_POINT('',#12761);+#12761 = CARTESIAN_POINT('',(0.896952516059,-1.270387292178E-02,+ 1.7000001));+#12762 = SURFACE_CURVE('',#12763,(#12767,#12774),.PCURVE_S1.);+#12763 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12764,#12765,#12766),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12764 = CARTESIAN_POINT('',(0.912512298397,-5.495163635933E-02,+ 1.7000001));+#12765 = CARTESIAN_POINT('',(0.912512298397,-2.619558292398E-02,+ 1.7000001));+#12766 = CARTESIAN_POINT('',(0.896952516059,-1.270387292178E-02,+ 1.7000001));+#12767 = PCURVE('',#12346,#12768);+#12768 = DEFINITIONAL_REPRESENTATION('',(#12769),#12773);+#12769 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12770,#12771,#12772),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12770 = CARTESIAN_POINT('',(0.183959958278,8.469248614521E-02));+#12771 = CARTESIAN_POINT('',(0.183959958278,0.113448539581));+#12772 = CARTESIAN_POINT('',(0.16840017594,0.126940249583));+#12773 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12774 = PCURVE('',#12775,#12782);+#12775 = SURFACE_OF_LINEAR_EXTRUSION('',#12776,#12780);+#12776 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12777,#12778,#12779),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12777 = CARTESIAN_POINT('',(0.912512298397,-5.495163635933E-02,+ 1.8000001));+#12778 = CARTESIAN_POINT('',(0.912512298397,-2.619558292398E-02,+ 1.8000001));+#12779 = CARTESIAN_POINT('',(0.896952516059,-1.270387292178E-02,+ 1.8000001));+#12780 = VECTOR('',#12781,1.);+#12781 = DIRECTION('',(0.,0.,1.));+#12782 = DEFINITIONAL_REPRESENTATION('',(#12783),#12787);+#12783 = LINE('',#12784,#12785);+#12784 = CARTESIAN_POINT('',(0.,-0.1));+#12785 = VECTOR('',#12786,1.);+#12786 = DIRECTION('',(1.,0.));+#12787 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12788 = ORIENTED_EDGE('',*,*,#12789,.T.);+#12789 = EDGE_CURVE('',#12760,#12614,#12790,.T.);+#12790 = SURFACE_CURVE('',#12791,(#12795,#12802),.PCURVE_S1.);+#12791 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12792,#12793,#12794),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12792 = CARTESIAN_POINT('',(0.896952516059,-1.270387292178E-02,+ 1.7000001));+#12793 = CARTESIAN_POINT('',(0.88139273372,7.878370804205E-04,1.7000001)+ );+#12794 = CARTESIAN_POINT('',(0.848303576343,7.878370804205E-04,1.7000001+ ));+#12795 = PCURVE('',#12346,#12796);+#12796 = DEFINITIONAL_REPRESENTATION('',(#12797),#12801);+#12797 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12798,#12799,#12800),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12798 = CARTESIAN_POINT('',(0.16840017594,0.126940249583));+#12799 = CARTESIAN_POINT('',(0.152840393602,0.140431959585));+#12800 = CARTESIAN_POINT('',(0.119751236224,0.140431959585));+#12801 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12802 = PCURVE('',#12803,#12810);+#12803 = SURFACE_OF_LINEAR_EXTRUSION('',#12804,#12808);+#12804 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12805,#12806,#12807),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12805 = CARTESIAN_POINT('',(0.896952516059,-1.270387292178E-02,+ 1.8000001));+#12806 = CARTESIAN_POINT('',(0.88139273372,7.878370804205E-04,1.8000001)+ );+#12807 = CARTESIAN_POINT('',(0.848303576343,7.878370804205E-04,1.8000001+ ));+#12808 = VECTOR('',#12809,1.);+#12809 = DIRECTION('',(0.,0.,1.));+#12810 = DEFINITIONAL_REPRESENTATION('',(#12811),#12815);+#12811 = LINE('',#12812,#12813);+#12812 = CARTESIAN_POINT('',(0.,-0.1));+#12813 = VECTOR('',#12814,1.);+#12814 = DIRECTION('',(1.,0.));+#12815 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12816 = FACE_BOUND('',#12817,.F.);+#12817 = EDGE_LOOP('',(#12818,#12848,#12876,#12904,#12934,#12964,#12994)+ );+#12818 = ORIENTED_EDGE('',*,*,#12819,.T.);+#12819 = EDGE_CURVE('',#12820,#12822,#12824,.T.);+#12820 = VERTEX_POINT('',#12821);+#12821 = CARTESIAN_POINT('',(0.847515739262,0.121720828925,1.7000001));+#12822 = VERTEX_POINT('',#12823);+#12823 = CARTESIAN_POINT('',(0.801230310788,0.121720828925,1.7000001));+#12824 = SURFACE_CURVE('',#12825,(#12829,#12836),.PCURVE_S1.);+#12825 = LINE('',#12826,#12827);+#12826 = CARTESIAN_POINT('',(0.847515739262,0.121720828925,1.7000001));+#12827 = VECTOR('',#12828,1.);+#12828 = DIRECTION('',(-1.,0.,0.));+#12829 = PCURVE('',#12346,#12830);+#12830 = DEFINITIONAL_REPRESENTATION('',(#12831),#12835);+#12831 = LINE('',#12832,#12833);+#12832 = CARTESIAN_POINT('',(0.118963399144,0.26136495143));+#12833 = VECTOR('',#12834,1.);+#12834 = DIRECTION('',(-1.,0.));+#12835 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12836 = PCURVE('',#12837,#12842);+#12837 = PLANE('',#12838);+#12838 = AXIS2_PLACEMENT_3D('',#12839,#12840,#12841);+#12839 = CARTESIAN_POINT('',(0.847515739262,0.121720828925,1.8000001));+#12840 = DIRECTION('',(0.,1.,0.));+#12841 = DIRECTION('',(-1.,0.,0.));+#12842 = DEFINITIONAL_REPRESENTATION('',(#12843),#12847);+#12843 = LINE('',#12844,#12845);+#12844 = CARTESIAN_POINT('',(0.,-0.1));+#12845 = VECTOR('',#12846,1.);+#12846 = DIRECTION('',(1.,0.));+#12847 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12848 = ORIENTED_EDGE('',*,*,#12849,.T.);+#12849 = EDGE_CURVE('',#12822,#12850,#12852,.T.);+#12850 = VERTEX_POINT('',#12851);+#12851 = CARTESIAN_POINT('',(0.801230310788,3.308915737766E-02,1.7000001+ ));+#12852 = SURFACE_CURVE('',#12853,(#12857,#12864),.PCURVE_S1.);+#12853 = LINE('',#12854,#12855);+#12854 = CARTESIAN_POINT('',(0.801230310788,0.121720828925,1.7000001));+#12855 = VECTOR('',#12856,1.);+#12856 = DIRECTION('',(0.,-1.,0.));+#12857 = PCURVE('',#12346,#12858);+#12858 = DEFINITIONAL_REPRESENTATION('',(#12859),#12863);+#12859 = LINE('',#12860,#12861);+#12860 = CARTESIAN_POINT('',(7.267797066879E-02,0.26136495143));+#12861 = VECTOR('',#12862,1.);+#12862 = DIRECTION('',(0.,-1.));+#12863 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12864 = PCURVE('',#12865,#12870);+#12865 = PLANE('',#12866);+#12866 = AXIS2_PLACEMENT_3D('',#12867,#12868,#12869);+#12867 = CARTESIAN_POINT('',(0.801230310788,0.121720828925,1.8000001));+#12868 = DIRECTION('',(-1.,0.,0.));+#12869 = DIRECTION('',(0.,-1.,0.));+#12870 = DEFINITIONAL_REPRESENTATION('',(#12871),#12875);+#12871 = LINE('',#12872,#12873);+#12872 = CARTESIAN_POINT('',(0.,-0.1));+#12873 = VECTOR('',#12874,1.);+#12874 = DIRECTION('',(1.,0.));+#12875 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12876 = ORIENTED_EDGE('',*,*,#12877,.T.);+#12877 = EDGE_CURVE('',#12850,#12878,#12880,.T.);+#12878 = VERTEX_POINT('',#12879);+#12879 = CARTESIAN_POINT('',(0.847515739262,3.308915737766E-02,1.7000001+ ));+#12880 = SURFACE_CURVE('',#12881,(#12885,#12892),.PCURVE_S1.);+#12881 = LINE('',#12882,#12883);+#12882 = CARTESIAN_POINT('',(0.801230310788,3.308915737766E-02,1.7000001+ ));+#12883 = VECTOR('',#12884,1.);+#12884 = DIRECTION('',(1.,0.,0.));+#12885 = PCURVE('',#12346,#12886);+#12886 = DEFINITIONAL_REPRESENTATION('',(#12887),#12891);+#12887 = LINE('',#12888,#12889);+#12888 = CARTESIAN_POINT('',(7.267797066879E-02,0.172733279882));+#12889 = VECTOR('',#12890,1.);+#12890 = DIRECTION('',(1.,0.));+#12891 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12892 = PCURVE('',#12893,#12898);+#12893 = PLANE('',#12894);+#12894 = AXIS2_PLACEMENT_3D('',#12895,#12896,#12897);+#12895 = CARTESIAN_POINT('',(0.801230310788,3.308915737766E-02,1.8000001+ ));+#12896 = DIRECTION('',(0.,-1.,0.));+#12897 = DIRECTION('',(1.,0.,0.));+#12898 = DEFINITIONAL_REPRESENTATION('',(#12899),#12903);+#12899 = LINE('',#12900,#12901);+#12900 = CARTESIAN_POINT('',(0.,-0.1));+#12901 = VECTOR('',#12902,1.);+#12902 = DIRECTION('',(1.,0.));+#12903 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12904 = ORIENTED_EDGE('',*,*,#12905,.T.);+#12905 = EDGE_CURVE('',#12878,#12906,#12908,.T.);+#12906 = VERTEX_POINT('',#12907);+#12907 = CARTESIAN_POINT('',(0.88917262489,4.411887650355E-02,1.7000001)+ );+#12908 = SURFACE_CURVE('',#12909,(#12913,#12920),.PCURVE_S1.);+#12909 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12910,#12911,#12912),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12910 = CARTESIAN_POINT('',(0.847515739262,3.308915737766E-02,1.7000001+ ));+#12911 = CARTESIAN_POINT('',(0.876271792698,3.308915737766E-02,1.7000001+ ));+#12912 = CARTESIAN_POINT('',(0.88917262489,4.411887650355E-02,1.7000001)+ );+#12913 = PCURVE('',#12346,#12914);+#12914 = DEFINITIONAL_REPRESENTATION('',(#12915),#12919);+#12915 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12916,#12917,#12918),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12916 = CARTESIAN_POINT('',(0.118963399144,0.172733279882));+#12917 = CARTESIAN_POINT('',(0.147719452579,0.172733279882));+#12918 = CARTESIAN_POINT('',(0.160620284771,0.183762999008));+#12919 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12920 = PCURVE('',#12921,#12928);+#12921 = SURFACE_OF_LINEAR_EXTRUSION('',#12922,#12926);+#12922 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12923,#12924,#12925),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12923 = CARTESIAN_POINT('',(0.847515739262,3.308915737766E-02,1.8000001+ ));+#12924 = CARTESIAN_POINT('',(0.876271792698,3.308915737766E-02,1.8000001+ ));+#12925 = CARTESIAN_POINT('',(0.88917262489,4.411887650355E-02,1.8000001)+ );+#12926 = VECTOR('',#12927,1.);+#12927 = DIRECTION('',(0.,0.,1.));+#12928 = DEFINITIONAL_REPRESENTATION('',(#12929),#12933);+#12929 = LINE('',#12930,#12931);+#12930 = CARTESIAN_POINT('',(0.,-0.1));+#12931 = VECTOR('',#12932,1.);+#12932 = DIRECTION('',(1.,0.));+#12933 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12934 = ORIENTED_EDGE('',*,*,#12935,.T.);+#12935 = EDGE_CURVE('',#12906,#12936,#12938,.T.);+#12936 = VERTEX_POINT('',#12937);+#12937 = CARTESIAN_POINT('',(0.902073457082,7.976850439258E-02,1.7000001+ ));+#12938 = SURFACE_CURVE('',#12939,(#12943,#12950),.PCURVE_S1.);+#12939 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12940,#12941,#12942),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12940 = CARTESIAN_POINT('',(0.88917262489,4.411887650355E-02,1.7000001)+ );+#12941 = CARTESIAN_POINT('',(0.902073457082,5.514859562944E-02,1.7000001+ ));+#12942 = CARTESIAN_POINT('',(0.902073457082,7.976850439258E-02,1.7000001+ ));+#12943 = PCURVE('',#12346,#12944);+#12944 = DEFINITIONAL_REPRESENTATION('',(#12945),#12949);+#12945 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12946,#12947,#12948),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12946 = CARTESIAN_POINT('',(0.160620284771,0.183762999008));+#12947 = CARTESIAN_POINT('',(0.173521116963,0.194792718134));+#12948 = CARTESIAN_POINT('',(0.173521116963,0.219412626897));+#12949 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12950 = PCURVE('',#12951,#12958);+#12951 = SURFACE_OF_LINEAR_EXTRUSION('',#12952,#12956);+#12952 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12953,#12954,#12955),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12953 = CARTESIAN_POINT('',(0.88917262489,4.411887650355E-02,1.8000001)+ );+#12954 = CARTESIAN_POINT('',(0.902073457082,5.514859562944E-02,1.8000001+ ));+#12955 = CARTESIAN_POINT('',(0.902073457082,7.976850439258E-02,1.8000001+ ));+#12956 = VECTOR('',#12957,1.);+#12957 = DIRECTION('',(0.,0.,1.));+#12958 = DEFINITIONAL_REPRESENTATION('',(#12959),#12963);+#12959 = LINE('',#12960,#12961);+#12960 = CARTESIAN_POINT('',(0.,-0.1));+#12961 = VECTOR('',#12962,1.);+#12962 = DIRECTION('',(1.,0.));+#12963 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12964 = ORIENTED_EDGE('',*,*,#12965,.T.);+#12965 = EDGE_CURVE('',#12936,#12966,#12968,.T.);+#12966 = VERTEX_POINT('',#12967);+#12967 = CARTESIAN_POINT('',(0.88936958416,0.11187286542,1.7000001));+#12968 = SURFACE_CURVE('',#12969,(#12973,#12980),.PCURVE_S1.);+#12969 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12970,#12971,#12972),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12970 = CARTESIAN_POINT('',(0.902073457082,7.976850439258E-02,1.7000001+ ));+#12971 = CARTESIAN_POINT('',(0.902073457082,0.102024901914,1.7000001));+#12972 = CARTESIAN_POINT('',(0.88936958416,0.11187286542,1.7000001));+#12973 = PCURVE('',#12346,#12974);+#12974 = DEFINITIONAL_REPRESENTATION('',(#12975),#12979);+#12975 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12976,#12977,#12978),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12976 = CARTESIAN_POINT('',(0.173521116963,0.219412626897));+#12977 = CARTESIAN_POINT('',(0.173521116963,0.241669024419));+#12978 = CARTESIAN_POINT('',(0.160817244041,0.251516987924));+#12979 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12980 = PCURVE('',#12981,#12988);+#12981 = SURFACE_OF_LINEAR_EXTRUSION('',#12982,#12986);+#12982 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12983,#12984,#12985),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12983 = CARTESIAN_POINT('',(0.902073457082,7.976850439258E-02,1.8000001+ ));+#12984 = CARTESIAN_POINT('',(0.902073457082,0.102024901914,1.8000001));+#12985 = CARTESIAN_POINT('',(0.88936958416,0.11187286542,1.8000001));+#12986 = VECTOR('',#12987,1.);+#12987 = DIRECTION('',(0.,0.,1.));+#12988 = DEFINITIONAL_REPRESENTATION('',(#12989),#12993);+#12989 = LINE('',#12990,#12991);+#12990 = CARTESIAN_POINT('',(0.,-0.1));+#12991 = VECTOR('',#12992,1.);+#12992 = DIRECTION('',(1.,0.));+#12993 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12994 = ORIENTED_EDGE('',*,*,#12995,.T.);+#12995 = EDGE_CURVE('',#12966,#12820,#12996,.T.);+#12996 = SURFACE_CURVE('',#12997,(#13001,#13008),.PCURVE_S1.);+#12997 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12998,#12999,#13000),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12998 = CARTESIAN_POINT('',(0.88936958416,0.11187286542,1.7000001));+#12999 = CARTESIAN_POINT('',(0.876665711238,0.121720828925,1.7000001));+#13000 = CARTESIAN_POINT('',(0.847515739262,0.121720828925,1.7000001));+#13001 = PCURVE('',#12346,#13002);+#13002 = DEFINITIONAL_REPRESENTATION('',(#13003),#13007);+#13003 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13004,#13005,#13006),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13004 = CARTESIAN_POINT('',(0.160817244041,0.251516987924));+#13005 = CARTESIAN_POINT('',(0.148113371119,0.26136495143));+#13006 = CARTESIAN_POINT('',(0.118963399144,0.26136495143));+#13007 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13008 = PCURVE('',#13009,#13016);+#13009 = SURFACE_OF_LINEAR_EXTRUSION('',#13010,#13014);+#13010 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13011,#13012,#13013),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13011 = CARTESIAN_POINT('',(0.88936958416,0.11187286542,1.8000001));+#13012 = CARTESIAN_POINT('',(0.876665711238,0.121720828925,1.8000001));+#13013 = CARTESIAN_POINT('',(0.847515739262,0.121720828925,1.8000001));+#13014 = VECTOR('',#13015,1.);+#13015 = DIRECTION('',(0.,0.,1.));+#13016 = DEFINITIONAL_REPRESENTATION('',(#13017),#13021);+#13017 = LINE('',#13018,#13019);+#13018 = CARTESIAN_POINT('',(0.,-0.1));+#13019 = VECTOR('',#13020,1.);+#13020 = DIRECTION('',(1.,0.));+#13021 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13022 = ADVANCED_FACE('',(#13023),#13009,.T.);+#13023 = FACE_BOUND('',#13024,.T.);+#13024 = EDGE_LOOP('',(#13025,#13061,#13082,#13083));+#13025 = ORIENTED_EDGE('',*,*,#13026,.T.);+#13026 = EDGE_CURVE('',#13027,#13029,#13031,.T.);+#13027 = VERTEX_POINT('',#13028);+#13028 = CARTESIAN_POINT('',(0.847515739262,0.121720828925,1.75));+#13029 = VERTEX_POINT('',#13030);+#13030 = CARTESIAN_POINT('',(0.88936958416,0.11187286542,1.75));+#13031 = SURFACE_CURVE('',#13032,(#13038,#13047),.PCURVE_S1.);+#13032 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#13033,#13034,#13035,#13036,+ #13037),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#13033 = CARTESIAN_POINT('',(0.847515739262,0.121720828925,1.75));+#13034 = CARTESIAN_POINT('',(0.862080351513,0.121720828925,1.75));+#13035 = CARTESIAN_POINT('',(0.873917124077,0.12008183908,1.75));+#13036 = CARTESIAN_POINT('',(0.883014673772,0.116799152542,1.75));+#13037 = CARTESIAN_POINT('',(0.88936958416,0.11187286542,1.75));+#13038 = PCURVE('',#13009,#13039);+#13039 = DEFINITIONAL_REPRESENTATION('',(#13040),#13046);+#13040 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#13041,#13042,#13043,#13044,+ #13045),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#13041 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#13042 = CARTESIAN_POINT('',(0.750177937344,-5.00001E-02));+#13043 = CARTESIAN_POINT('',(0.50019681184,-5.00001E-02));+#13044 = CARTESIAN_POINT('',(0.250117048049,-5.00001E-02));+#13045 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#13046 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13047 = PCURVE('',#13048,#13053);+#13048 = PLANE('',#13049);+#13049 = AXIS2_PLACEMENT_3D('',#13050,#13051,#13052);+#13050 = CARTESIAN_POINT('',(-1.680085640382,2.260171280765,1.75));+#13051 = DIRECTION('',(0.,0.,-1.));+#13052 = DIRECTION('',(0.596575959062,-0.802556617983,0.));+#13053 = DEFINITIONAL_REPRESENTATION('',(#13054),#13060);+#13054 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#13055,#13056,#13057,#13058,+ #13059),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#13055 = CARTESIAN_POINT('',(3.224133779542,-0.752795085644));+#13056 = CARTESIAN_POINT('',(3.232822677064,-0.764484011594));+#13057 = CARTESIAN_POINT('',(3.241199593156,-0.773005909812));+#13058 = CARTESIAN_POINT('',(3.249261514395,-0.778348836657));+#13059 = CARTESIAN_POINT('',(3.257006325487,-0.780510107581));+#13060 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13061 = ORIENTED_EDGE('',*,*,#13062,.T.);+#13062 = EDGE_CURVE('',#13029,#12966,#13063,.T.);+#13063 = SURFACE_CURVE('',#13064,(#13068,#13075),.PCURVE_S1.);+#13064 = LINE('',#13065,#13066);+#13065 = CARTESIAN_POINT('',(0.88936958416,0.11187286542,1.8000001));+#13066 = VECTOR('',#13067,1.);+#13067 = DIRECTION('',(-0.,-0.,-1.));+#13068 = PCURVE('',#13009,#13069);+#13069 = DEFINITIONAL_REPRESENTATION('',(#13070),#13074);+#13070 = LINE('',#13071,#13072);+#13071 = CARTESIAN_POINT('',(0.,0.));+#13072 = VECTOR('',#13073,1.);+#13073 = DIRECTION('',(0.,-1.));+#13074 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13075 = PCURVE('',#12981,#13076);+#13076 = DEFINITIONAL_REPRESENTATION('',(#13077),#13081);+#13077 = LINE('',#13078,#13079);+#13078 = CARTESIAN_POINT('',(1.,0.));+#13079 = VECTOR('',#13080,1.);+#13080 = DIRECTION('',(0.,-1.));+#13081 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13082 = ORIENTED_EDGE('',*,*,#12995,.T.);+#13083 = ORIENTED_EDGE('',*,*,#13084,.F.);+#13084 = EDGE_CURVE('',#13027,#12820,#13085,.T.);+#13085 = SURFACE_CURVE('',#13086,(#13090,#13097),.PCURVE_S1.);+#13086 = LINE('',#13087,#13088);+#13087 = CARTESIAN_POINT('',(0.847515739262,0.121720828925,1.8000001));+#13088 = VECTOR('',#13089,1.);+#13089 = DIRECTION('',(-0.,-0.,-1.));+#13090 = PCURVE('',#13009,#13091);+#13091 = DEFINITIONAL_REPRESENTATION('',(#13092),#13096);+#13092 = LINE('',#13093,#13094);+#13093 = CARTESIAN_POINT('',(1.,0.));+#13094 = VECTOR('',#13095,1.);+#13095 = DIRECTION('',(0.,-1.));+#13096 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13097 = PCURVE('',#12837,#13098);+#13098 = DEFINITIONAL_REPRESENTATION('',(#13099),#13103);+#13099 = LINE('',#13100,#13101);+#13100 = CARTESIAN_POINT('',(0.,0.));+#13101 = VECTOR('',#13102,1.);+#13102 = DIRECTION('',(0.,-1.));+#13103 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13104 = ADVANCED_FACE('',(#13105),#13048,.F.);+#13105 = FACE_BOUND('',#13106,.F.);+#13106 = EDGE_LOOP('',(#13107,#13130,#13149,#13150,#13179,#13208,#13237)+ );+#13107 = ORIENTED_EDGE('',*,*,#13108,.T.);+#13108 = EDGE_CURVE('',#13109,#13111,#13113,.T.);+#13109 = VERTEX_POINT('',#13110);+#13110 = CARTESIAN_POINT('',(0.801230310788,3.308915737766E-02,1.75));+#13111 = VERTEX_POINT('',#13112);+#13112 = CARTESIAN_POINT('',(0.801230310788,0.121720828925,1.75));+#13113 = SURFACE_CURVE('',#13114,(#13118,#13124),.PCURVE_S1.);+#13114 = LINE('',#13115,#13116);+#13115 = CARTESIAN_POINT('',(0.801230310788,1.190946054845,1.75));+#13116 = VECTOR('',#13117,1.);+#13117 = DIRECTION('',(0.,1.,0.));+#13118 = PCURVE('',#13048,#13119);+#13119 = DEFINITIONAL_REPRESENTATION('',(#13120),#13123);+#13120 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#13121,#13122),.UNSPECIFIED.,+ .F.,.F.,(2,2),(-1.157856897467,-1.06922522592),+ .PIECEWISE_BEZIER_KNOTS.);+#13121 = CARTESIAN_POINT('',(3.267652940223,-0.662772884249));+#13122 = CARTESIAN_POINT('',(3.196521005659,-0.715648408705));+#13123 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13124 = PCURVE('',#12865,#13125);+#13125 = DEFINITIONAL_REPRESENTATION('',(#13126),#13129);+#13126 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#13127,#13128),.UNSPECIFIED.,+ .F.,.F.,(2,2),(-1.157856897467,-1.06922522592),+ .PIECEWISE_BEZIER_KNOTS.);+#13127 = CARTESIAN_POINT('',(8.863167154731E-02,-5.00001E-02));+#13128 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#13129 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13130 = ORIENTED_EDGE('',*,*,#13131,.T.);+#13131 = EDGE_CURVE('',#13111,#13027,#13132,.T.);+#13132 = SURFACE_CURVE('',#13133,(#13137,#13143),.PCURVE_S1.);+#13133 = LINE('',#13134,#13135);+#13134 = CARTESIAN_POINT('',(-0.41628495056,0.121720828925,1.75));+#13135 = VECTOR('',#13136,1.);+#13136 = DIRECTION('',(1.,-0.,0.));+#13137 = PCURVE('',#13048,#13138);+#13138 = DEFINITIONAL_REPRESENTATION('',(#13139),#13142);+#13139 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#13140,#13141),.UNSPECIFIED.,+ .F.,.F.,(2,2),(1.217515261347,1.263800689822),+ .PIECEWISE_BEZIER_KNOTS.);+#13140 = CARTESIAN_POINT('',(3.196521005659,-0.715648408705));+#13141 = CARTESIAN_POINT('',(3.224133779542,-0.752795085644));+#13142 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13143 = PCURVE('',#12837,#13144);+#13144 = DEFINITIONAL_REPRESENTATION('',(#13145),#13148);+#13145 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#13146,#13147),.UNSPECIFIED.,+ .F.,.F.,(2,2),(1.217515261347,1.263800689822),+ .PIECEWISE_BEZIER_KNOTS.);+#13146 = CARTESIAN_POINT('',(4.628542847471E-02,-5.00001E-02));+#13147 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#13148 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13149 = ORIENTED_EDGE('',*,*,#13026,.T.);+#13150 = ORIENTED_EDGE('',*,*,#13151,.T.);+#13151 = EDGE_CURVE('',#13029,#13152,#13154,.T.);+#13152 = VERTEX_POINT('',#13153);+#13153 = CARTESIAN_POINT('',(0.902073457082,7.976850439258E-02,1.75));+#13154 = SURFACE_CURVE('',#13155,(#13161,#13170),.PCURVE_S1.);+#13155 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#13156,#13157,#13158,#13159,+ #13160),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#13156 = CARTESIAN_POINT('',(0.88936958416,0.11187286542,1.75));+#13157 = CARTESIAN_POINT('',(0.895722357093,0.106948235239,1.75));+#13158 = CARTESIAN_POINT('',(0.899957591622,9.995472973859E-02,1.75));+#13159 = CARTESIAN_POINT('',(0.902073457082,9.089290285413E-02,1.75));+#13160 = CARTESIAN_POINT('',(0.902073457082,7.976850439258E-02,1.75));+#13161 = PCURVE('',#13048,#13162);+#13162 = DEFINITIONAL_REPRESENTATION('',(#13163),#13169);+#13163 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#13164,#13165,#13166,#13167,+ #13168),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#13164 = CARTESIAN_POINT('',(3.257006325487,-0.780510107581));+#13165 = CARTESIAN_POINT('',(3.264748531635,-0.782670651568));+#13166 = CARTESIAN_POINT('',(3.272887854858,-0.781897509817));+#13167 = CARTESIAN_POINT('',(3.281422758461,-0.77818954358));+#13168 = CARTESIAN_POINT('',(3.290350718068,-0.771552994899));+#13169 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13170 = PCURVE('',#12981,#13171);+#13171 = DEFINITIONAL_REPRESENTATION('',(#13172),#13178);+#13172 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#13173,#13174,#13175,#13176,+ #13177),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#13173 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#13174 = CARTESIAN_POINT('',(0.749967078057,-5.00001E-02));+#13175 = CARTESIAN_POINT('',(0.499921081349,-5.00001E-02));+#13176 = CARTESIAN_POINT('',(0.249914624562,-5.00001E-02));+#13177 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#13178 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13179 = ORIENTED_EDGE('',*,*,#13180,.T.);+#13180 = EDGE_CURVE('',#13152,#13181,#13183,.T.);+#13181 = VERTEX_POINT('',#13182);+#13182 = CARTESIAN_POINT('',(0.88917262489,4.411887650355E-02,1.75));+#13183 = SURFACE_CURVE('',#13184,(#13190,#13199),.PCURVE_S1.);+#13184 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#13185,#13186,#13187,#13188,+ #13189),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#13185 = CARTESIAN_POINT('',(0.902073457082,7.976850439258E-02,1.75));+#13186 = CARTESIAN_POINT('',(0.902073457082,6.746389465809E-02,1.75));+#13187 = CARTESIAN_POINT('',(0.899925186268,5.741687384259E-02,1.75));+#13188 = CARTESIAN_POINT('',(0.895624335742,4.963484303358E-02,1.75));+#13189 = CARTESIAN_POINT('',(0.88917262489,4.411887650355E-02,1.75));+#13190 = PCURVE('',#13048,#13191);+#13191 = DEFINITIONAL_REPRESENTATION('',(#13192),#13198);+#13192 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#13193,#13194,#13195,#13196,+ #13197),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#13193 = CARTESIAN_POINT('',(3.290350718068,-0.771552994899));+#13194 = CARTESIAN_POINT('',(3.300225864042,-0.764212360546));+#13195 = CARTESIAN_POINT('',(3.307007560368,-0.756494440509));+#13196 = CARTESIAN_POINT('',(3.310687296667,-0.748400191962));+#13197 = CARTESIAN_POINT('',(3.311265236521,-0.739931635698));+#13198 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13199 = PCURVE('',#12951,#13200);+#13200 = DEFINITIONAL_REPRESENTATION('',(#13201),#13207);+#13201 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#13202,#13203,#13204,#13205,+ #13206),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#13202 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#13203 = CARTESIAN_POINT('',(0.750108543194,-5.00001E-02));+#13204 = CARTESIAN_POINT('',(0.500105896072,-5.00001E-02));+#13205 = CARTESIAN_POINT('',(0.250050181109,-5.00001E-02));+#13206 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#13207 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13208 = ORIENTED_EDGE('',*,*,#13209,.T.);+#13209 = EDGE_CURVE('',#13181,#13210,#13212,.T.);+#13210 = VERTEX_POINT('',#13211);+#13211 = CARTESIAN_POINT('',(0.847515739262,3.308915737766E-02,1.75));+#13212 = SURFACE_CURVE('',#13213,(#13219,#13228),.PCURVE_S1.);+#13213 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#13214,#13215,#13216,#13217,+ #13218),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#13214 = CARTESIAN_POINT('',(0.88917262489,4.411887650355E-02,1.75));+#13215 = CARTESIAN_POINT('',(0.882719539324,3.860173464568E-02,1.75));+#13216 = CARTESIAN_POINT('',(0.873622438606,3.492501160749E-02,1.75));+#13217 = CARTESIAN_POINT('',(0.861884258164,3.308915737766E-02,1.75));+#13218 = CARTESIAN_POINT('',(0.847515739262,3.308915737766E-02,1.75));+#13219 = PCURVE('',#13048,#13220);+#13220 = DEFINITIONAL_REPRESENTATION('',(#13221),#13227);+#13221 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#13222,#13223,#13224,#13225,+ #13226),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#13222 = CARTESIAN_POINT('',(3.311265236521,-0.739931635698));+#13223 = CARTESIAN_POINT('',(3.311843299521,-0.731461274975));+#13224 = CARTESIAN_POINT('',(3.309366966342,-0.721966892017));+#13225 = CARTESIAN_POINT('',(3.30383762705,-0.711451111123));+#13226 = CARTESIAN_POINT('',(3.295265714105,-0.699919561187));+#13227 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13228 = PCURVE('',#12921,#13229);+#13229 = DEFINITIONAL_REPRESENTATION('',(#13230),#13236);+#13230 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#13231,#13232,#13233,#13234,+ #13235),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#13231 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#13232 = CARTESIAN_POINT('',(0.749896538847,-5.00001E-02));+#13233 = CARTESIAN_POINT('',(0.499820670167,-5.00001E-02));+#13234 = CARTESIAN_POINT('',(0.249834681489,-5.00001E-02));+#13235 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#13236 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13237 = ORIENTED_EDGE('',*,*,#13238,.T.);+#13238 = EDGE_CURVE('',#13210,#13109,#13239,.T.);+#13239 = SURFACE_CURVE('',#13240,(#13244,#13250),.PCURVE_S1.);+#13240 = LINE('',#13241,#13242);+#13241 = CARTESIAN_POINT('',(-0.439427664797,3.308915737766E-02,1.75));+#13242 = VECTOR('',#13243,1.);+#13243 = DIRECTION('',(-1.,-0.,-0.));+#13244 = PCURVE('',#13048,#13245);+#13245 = DEFINITIONAL_REPRESENTATION('',(#13246),#13249);+#13246 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#13247,#13248),.UNSPECIFIED.,+ .F.,.F.,(2,2),(-1.28694340406,-1.240657975585),+ .PIECEWISE_BEZIER_KNOTS.);+#13247 = CARTESIAN_POINT('',(3.295265714105,-0.699919561187));+#13248 = CARTESIAN_POINT('',(3.267652940223,-0.662772884249));+#13249 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13250 = PCURVE('',#12893,#13251);+#13251 = DEFINITIONAL_REPRESENTATION('',(#13252),#13255);+#13252 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#13253,#13254),.UNSPECIFIED.,+ .F.,.F.,(2,2),(-1.28694340406,-1.240657975585),+ .PIECEWISE_BEZIER_KNOTS.);+#13253 = CARTESIAN_POINT('',(4.628542847471E-02,-5.00001E-02));+#13254 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#13255 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13256 = ADVANCED_FACE('',(#13257),#12981,.T.);+#13257 = FACE_BOUND('',#13258,.T.);+#13258 = EDGE_LOOP('',(#13259,#13260,#13281,#13282));+#13259 = ORIENTED_EDGE('',*,*,#13151,.T.);+#13260 = ORIENTED_EDGE('',*,*,#13261,.T.);+#13261 = EDGE_CURVE('',#13152,#12936,#13262,.T.);+#13262 = SURFACE_CURVE('',#13263,(#13267,#13274),.PCURVE_S1.);+#13263 = LINE('',#13264,#13265);+#13264 = CARTESIAN_POINT('',(0.902073457082,7.976850439258E-02,1.8000001+ ));+#13265 = VECTOR('',#13266,1.);+#13266 = DIRECTION('',(-0.,-0.,-1.));+#13267 = PCURVE('',#12981,#13268);+#13268 = DEFINITIONAL_REPRESENTATION('',(#13269),#13273);+#13269 = LINE('',#13270,#13271);+#13270 = CARTESIAN_POINT('',(0.,0.));+#13271 = VECTOR('',#13272,1.);+#13272 = DIRECTION('',(0.,-1.));+#13273 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13274 = PCURVE('',#12951,#13275);+#13275 = DEFINITIONAL_REPRESENTATION('',(#13276),#13280);+#13276 = LINE('',#13277,#13278);+#13277 = CARTESIAN_POINT('',(1.,0.));+#13278 = VECTOR('',#13279,1.);+#13279 = DIRECTION('',(0.,-1.));+#13280 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13281 = ORIENTED_EDGE('',*,*,#12965,.T.);+#13282 = ORIENTED_EDGE('',*,*,#13062,.F.);+#13283 = ADVANCED_FACE('',(#13284),#12951,.T.);+#13284 = FACE_BOUND('',#13285,.T.);+#13285 = EDGE_LOOP('',(#13286,#13287,#13308,#13309));+#13286 = ORIENTED_EDGE('',*,*,#13180,.T.);+#13287 = ORIENTED_EDGE('',*,*,#13288,.T.);+#13288 = EDGE_CURVE('',#13181,#12906,#13289,.T.);+#13289 = SURFACE_CURVE('',#13290,(#13294,#13301),.PCURVE_S1.);+#13290 = LINE('',#13291,#13292);+#13291 = CARTESIAN_POINT('',(0.88917262489,4.411887650355E-02,1.8000001)+ );+#13292 = VECTOR('',#13293,1.);+#13293 = DIRECTION('',(-0.,-0.,-1.));+#13294 = PCURVE('',#12951,#13295);+#13295 = DEFINITIONAL_REPRESENTATION('',(#13296),#13300);+#13296 = LINE('',#13297,#13298);+#13297 = CARTESIAN_POINT('',(0.,0.));+#13298 = VECTOR('',#13299,1.);+#13299 = DIRECTION('',(0.,-1.));+#13300 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13301 = PCURVE('',#12921,#13302);+#13302 = DEFINITIONAL_REPRESENTATION('',(#13303),#13307);+#13303 = LINE('',#13304,#13305);+#13304 = CARTESIAN_POINT('',(1.,0.));+#13305 = VECTOR('',#13306,1.);+#13306 = DIRECTION('',(0.,-1.));+#13307 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13308 = ORIENTED_EDGE('',*,*,#12935,.T.);+#13309 = ORIENTED_EDGE('',*,*,#13261,.F.);+#13310 = ADVANCED_FACE('',(#13311),#12921,.T.);+#13311 = FACE_BOUND('',#13312,.T.);+#13312 = EDGE_LOOP('',(#13313,#13314,#13335,#13336));+#13313 = ORIENTED_EDGE('',*,*,#13209,.T.);+#13314 = ORIENTED_EDGE('',*,*,#13315,.T.);+#13315 = EDGE_CURVE('',#13210,#12878,#13316,.T.);+#13316 = SURFACE_CURVE('',#13317,(#13321,#13328),.PCURVE_S1.);+#13317 = LINE('',#13318,#13319);+#13318 = CARTESIAN_POINT('',(0.847515739262,3.308915737766E-02,1.8000001+ ));+#13319 = VECTOR('',#13320,1.);+#13320 = DIRECTION('',(-0.,-0.,-1.));+#13321 = PCURVE('',#12921,#13322);+#13322 = DEFINITIONAL_REPRESENTATION('',(#13323),#13327);+#13323 = LINE('',#13324,#13325);+#13324 = CARTESIAN_POINT('',(0.,0.));+#13325 = VECTOR('',#13326,1.);+#13326 = DIRECTION('',(0.,-1.));+#13327 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13328 = PCURVE('',#12893,#13329);+#13329 = DEFINITIONAL_REPRESENTATION('',(#13330),#13334);+#13330 = LINE('',#13331,#13332);+#13331 = CARTESIAN_POINT('',(4.628542847471E-02,0.));+#13332 = VECTOR('',#13333,1.);+#13333 = DIRECTION('',(0.,-1.));+#13334 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13335 = ORIENTED_EDGE('',*,*,#12905,.T.);+#13336 = ORIENTED_EDGE('',*,*,#13288,.F.);+#13337 = ADVANCED_FACE('',(#13338),#12893,.T.);+#13338 = FACE_BOUND('',#13339,.T.);+#13339 = EDGE_LOOP('',(#13340,#13341,#13362,#13363));+#13340 = ORIENTED_EDGE('',*,*,#13238,.T.);+#13341 = ORIENTED_EDGE('',*,*,#13342,.T.);+#13342 = EDGE_CURVE('',#13109,#12850,#13343,.T.);+#13343 = SURFACE_CURVE('',#13344,(#13348,#13355),.PCURVE_S1.);+#13344 = LINE('',#13345,#13346);+#13345 = CARTESIAN_POINT('',(0.801230310788,3.308915737766E-02,1.8000001+ ));+#13346 = VECTOR('',#13347,1.);+#13347 = DIRECTION('',(-0.,-0.,-1.));+#13348 = PCURVE('',#12893,#13349);+#13349 = DEFINITIONAL_REPRESENTATION('',(#13350),#13354);+#13350 = LINE('',#13351,#13352);+#13351 = CARTESIAN_POINT('',(0.,0.));+#13352 = VECTOR('',#13353,1.);+#13353 = DIRECTION('',(0.,-1.));+#13354 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13355 = PCURVE('',#12865,#13356);+#13356 = DEFINITIONAL_REPRESENTATION('',(#13357),#13361);+#13357 = LINE('',#13358,#13359);+#13358 = CARTESIAN_POINT('',(8.863167154731E-02,0.));+#13359 = VECTOR('',#13360,1.);+#13360 = DIRECTION('',(0.,-1.));+#13361 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13362 = ORIENTED_EDGE('',*,*,#12877,.T.);+#13363 = ORIENTED_EDGE('',*,*,#13315,.F.);+#13364 = ADVANCED_FACE('',(#13365),#12865,.T.);+#13365 = FACE_BOUND('',#13366,.T.);+#13366 = EDGE_LOOP('',(#13367,#13368,#13389,#13390));+#13367 = ORIENTED_EDGE('',*,*,#13108,.T.);+#13368 = ORIENTED_EDGE('',*,*,#13369,.T.);+#13369 = EDGE_CURVE('',#13111,#12822,#13370,.T.);+#13370 = SURFACE_CURVE('',#13371,(#13375,#13382),.PCURVE_S1.);+#13371 = LINE('',#13372,#13373);+#13372 = CARTESIAN_POINT('',(0.801230310788,0.121720828925,1.8000001));+#13373 = VECTOR('',#13374,1.);+#13374 = DIRECTION('',(-0.,-0.,-1.));+#13375 = PCURVE('',#12865,#13376);+#13376 = DEFINITIONAL_REPRESENTATION('',(#13377),#13381);+#13377 = LINE('',#13378,#13379);+#13378 = CARTESIAN_POINT('',(0.,0.));+#13379 = VECTOR('',#13380,1.);+#13380 = DIRECTION('',(0.,-1.));+#13381 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13382 = PCURVE('',#12837,#13383);+#13383 = DEFINITIONAL_REPRESENTATION('',(#13384),#13388);+#13384 = LINE('',#13385,#13386);+#13385 = CARTESIAN_POINT('',(4.628542847471E-02,0.));+#13386 = VECTOR('',#13387,1.);+#13387 = DIRECTION('',(0.,-1.));+#13388 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13389 = ORIENTED_EDGE('',*,*,#12849,.T.);+#13390 = ORIENTED_EDGE('',*,*,#13342,.F.);+#13391 = ADVANCED_FACE('',(#13392),#12837,.T.);+#13392 = FACE_BOUND('',#13393,.T.);+#13393 = EDGE_LOOP('',(#13394,#13395,#13396,#13397));+#13394 = ORIENTED_EDGE('',*,*,#13131,.T.);+#13395 = ORIENTED_EDGE('',*,*,#13084,.T.);+#13396 = ORIENTED_EDGE('',*,*,#12819,.T.);+#13397 = ORIENTED_EDGE('',*,*,#13369,.F.);+#13398 = ADVANCED_FACE('',(#13399),#12803,.T.);+#13399 = FACE_BOUND('',#13400,.T.);+#13400 = EDGE_LOOP('',(#13401,#13437,#13458,#13459));+#13401 = ORIENTED_EDGE('',*,*,#13402,.T.);+#13402 = EDGE_CURVE('',#13403,#13405,#13407,.T.);+#13403 = VERTEX_POINT('',#13404);+#13404 = CARTESIAN_POINT('',(0.848303576343,7.878370804205E-04,1.75));+#13405 = VERTEX_POINT('',#13406);+#13406 = CARTESIAN_POINT('',(0.896952516059,-1.270387292178E-02,1.75));+#13407 = SURFACE_CURVE('',#13408,(#13414,#13423),.PCURVE_S1.);+#13408 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#13409,#13410,#13411,#13412,+ #13413),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#13409 = CARTESIAN_POINT('',(0.848303576343,7.878370804204E-04,1.75));+#13410 = CARTESIAN_POINT('',(0.864834411746,7.878370804204E-04,1.75));+#13411 = CARTESIAN_POINT('',(0.878461263004,-1.457043281067E-03,1.75));+#13412 = CARTESIAN_POINT('',(0.889168683915,-5.954600746092E-03,1.75));+#13413 = CARTESIAN_POINT('',(0.896952516059,-1.270387292178E-02,1.75));+#13414 = PCURVE('',#12803,#13415);+#13415 = DEFINITIONAL_REPRESENTATION('',(#13416),#13422);+#13416 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#13417,#13418,#13419,#13420,+ #13421),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#13417 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#13418 = CARTESIAN_POINT('',(0.750207670522,-5.00001E-02));+#13419 = CARTESIAN_POINT('',(0.500223106999,-5.00001E-02));+#13420 = CARTESIAN_POINT('',(0.250126639788,-5.00001E-02));+#13421 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#13422 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13423 = PCURVE('',#13424,#13429);+#13424 = PLANE('',#13425);+#13425 = AXIS2_PLACEMENT_3D('',#13426,#13427,#13428);+#13426 = CARTESIAN_POINT('',(-1.680085640382,2.260171280765,1.75));+#13427 = DIRECTION('',(0.,0.,-1.));+#13428 = DIRECTION('',(0.596575959062,-0.802556617983,0.));+#13429 = DEFINITIONAL_REPRESENTATION('',(#13430),#13436);+#13430 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#13431,#13432,#13433,#13434,+ #13435),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#13431 = CARTESIAN_POINT('',(3.321659357141,-0.681281653915));+#13432 = CARTESIAN_POINT('',(3.331521256126,-0.694548585269));+#13433 = CARTESIAN_POINT('',(3.341452351575,-0.704145663273));+#13434 = CARTESIAN_POINT('',(3.351449685982,-0.710055840128));+#13435 = CARTESIAN_POINT('',(3.36151000616,-0.712276352608));+#13436 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13437 = ORIENTED_EDGE('',*,*,#13438,.T.);+#13438 = EDGE_CURVE('',#13405,#12760,#13439,.T.);+#13439 = SURFACE_CURVE('',#13440,(#13444,#13451),.PCURVE_S1.);+#13440 = LINE('',#13441,#13442);+#13441 = CARTESIAN_POINT('',(0.896952516059,-1.270387292178E-02,+ 1.8000001));+#13442 = VECTOR('',#13443,1.);+#13443 = DIRECTION('',(-0.,-0.,-1.));+#13444 = PCURVE('',#12803,#13445);+#13445 = DEFINITIONAL_REPRESENTATION('',(#13446),#13450);+#13446 = LINE('',#13447,#13448);+#13447 = CARTESIAN_POINT('',(0.,0.));+#13448 = VECTOR('',#13449,1.);+#13449 = DIRECTION('',(0.,-1.));+#13450 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13451 = PCURVE('',#12775,#13452);+#13452 = DEFINITIONAL_REPRESENTATION('',(#13453),#13457);+#13453 = LINE('',#13454,#13455);+#13454 = CARTESIAN_POINT('',(1.,0.));+#13455 = VECTOR('',#13456,1.);+#13456 = DIRECTION('',(0.,-1.));+#13457 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13458 = ORIENTED_EDGE('',*,*,#12789,.T.);+#13459 = ORIENTED_EDGE('',*,*,#13460,.F.);+#13460 = EDGE_CURVE('',#13403,#12614,#13461,.T.);+#13461 = SURFACE_CURVE('',#13462,(#13466,#13473),.PCURVE_S1.);+#13462 = LINE('',#13463,#13464);+#13463 = CARTESIAN_POINT('',(0.848303576343,7.878370804205E-04,1.8000001+ ));+#13464 = VECTOR('',#13465,1.);+#13465 = DIRECTION('',(-0.,-0.,-1.));+#13466 = PCURVE('',#12803,#13467);+#13467 = DEFINITIONAL_REPRESENTATION('',(#13468),#13472);+#13468 = LINE('',#13469,#13470);+#13469 = CARTESIAN_POINT('',(1.,0.));+#13470 = VECTOR('',#13471,1.);+#13471 = DIRECTION('',(0.,-1.));+#13472 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13473 = PCURVE('',#12631,#13474);+#13474 = DEFINITIONAL_REPRESENTATION('',(#13475),#13479);+#13475 = LINE('',#13476,#13477);+#13476 = CARTESIAN_POINT('',(0.,0.));+#13477 = VECTOR('',#13478,1.);+#13478 = DIRECTION('',(0.,-1.));+#13479 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13480 = ADVANCED_FACE('',(#13481),#13424,.F.);+#13481 = FACE_BOUND('',#13482,.F.);+#13482 = EDGE_LOOP('',(#13483,#13506,#13525,#13526,#13555,#13584,#13613)+ );+#13483 = ORIENTED_EDGE('',*,*,#13484,.T.);+#13484 = EDGE_CURVE('',#13485,#13487,#13489,.T.);+#13485 = VERTEX_POINT('',#13486);+#13486 = CARTESIAN_POINT('',(0.801230310788,-0.106948883667,1.75));+#13487 = VERTEX_POINT('',#13488);+#13488 = CARTESIAN_POINT('',(0.801230310788,7.878370804205E-04,1.75));+#13489 = SURFACE_CURVE('',#13490,(#13494,#13500),.PCURVE_S1.);+#13490 = LINE('',#13491,#13492);+#13491 = CARTESIAN_POINT('',(0.801230310788,1.130479558923,1.75));+#13492 = VECTOR('',#13493,1.);+#13493 = DIRECTION('',(0.,1.,0.));+#13494 = PCURVE('',#13424,#13495);+#13495 = DEFINITIONAL_REPRESENTATION('',(#13496),#13499);+#13496 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#13497,#13498),.UNSPECIFIED.,+ .F.,.F.,(2,2),(-1.23742844259,-1.129691721842),+ .PIECEWISE_BEZIER_KNOTS.);+#13497 = CARTESIAN_POINT('',(3.380041396832,-0.579229555607));+#13498 = CARTESIAN_POINT('',(3.293576578597,-0.643502693113));+#13499 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13500 = PCURVE('',#12659,#13501);+#13501 = DEFINITIONAL_REPRESENTATION('',(#13502),#13505);+#13502 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#13503,#13504),.UNSPECIFIED.,+ .F.,.F.,(2,2),(-1.23742844259,-1.129691721842),+ .PIECEWISE_BEZIER_KNOTS.);+#13503 = CARTESIAN_POINT('',(0.107736720748,-5.00001E-02));+#13504 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#13505 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13506 = ORIENTED_EDGE('',*,*,#13507,.T.);+#13507 = EDGE_CURVE('',#13487,#13403,#13508,.T.);+#13508 = SURFACE_CURVE('',#13509,(#13513,#13519),.PCURVE_S1.);+#13509 = LINE('',#13510,#13511);+#13510 = CARTESIAN_POINT('',(-0.41589103202,7.878370804205E-04,1.75));+#13511 = VECTOR('',#13512,1.);+#13512 = DIRECTION('',(1.,-0.,0.));+#13513 = PCURVE('',#13424,#13514);+#13514 = DEFINITIONAL_REPRESENTATION('',(#13515),#13518);+#13515 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#13516,#13517),.UNSPECIFIED.,+ .F.,.F.,(2,2),(1.217121342807,1.264194608362),+ .PIECEWISE_BEZIER_KNOTS.);+#13516 = CARTESIAN_POINT('',(3.293576578597,-0.643502693113));+#13517 = CARTESIAN_POINT('',(3.321659357141,-0.681281653915));+#13518 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13519 = PCURVE('',#12631,#13520);+#13520 = DEFINITIONAL_REPRESENTATION('',(#13521),#13524);+#13521 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#13522,#13523),.UNSPECIFIED.,+ .F.,.F.,(2,2),(1.217121342807,1.264194608362),+ .PIECEWISE_BEZIER_KNOTS.);+#13522 = CARTESIAN_POINT('',(4.707326555513E-02,-5.00001E-02));+#13523 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#13524 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13525 = ORIENTED_EDGE('',*,*,#13402,.T.);+#13526 = ORIENTED_EDGE('',*,*,#13527,.T.);+#13527 = EDGE_CURVE('',#13405,#13528,#13530,.T.);+#13528 = VERTEX_POINT('',#13529);+#13529 = CARTESIAN_POINT('',(0.912512298397,-5.495163635933E-02,1.75));+#13530 = SURFACE_CURVE('',#13531,(#13537,#13546),.PCURVE_S1.);+#13531 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#13532,#13533,#13534,#13535,+ #13536),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#13532 = CARTESIAN_POINT('',(0.896952516059,-1.270387292178E-02,1.75));+#13533 = CARTESIAN_POINT('',(0.904734304773,-1.945137326272E-02,1.75));+#13534 = CARTESIAN_POINT('',(0.90992190503,-2.874450051585E-02,1.75));+#13535 = CARTESIAN_POINT('',(0.912512298397,-4.058165436254E-02,1.75));+#13536 = CARTESIAN_POINT('',(0.912512298397,-5.495163635933E-02,1.75));+#13537 = PCURVE('',#13424,#13538);+#13538 = DEFINITIONAL_REPRESENTATION('',(#13539),#13545);+#13539 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#13540,#13541,#13542,#13543,+ #13544),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#13540 = CARTESIAN_POINT('',(3.36151000616,-0.712276352608));+#13541 = CARTESIAN_POINT('',(3.371567685279,-0.714496282153));+#13542 = CARTESIAN_POINT('',(3.382120743656,-0.713115568767));+#13543 = CARTESIAN_POINT('',(3.393166096221,-0.708132744698));+#13544 = CARTESIAN_POINT('',(3.404698820373,-0.699559958907));+#13545 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13546 = PCURVE('',#12775,#13547);+#13547 = DEFINITIONAL_REPRESENTATION('',(#13548),#13554);+#13548 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#13549,#13550,#13551,#13552,+ #13553),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#13549 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#13550 = CARTESIAN_POINT('',(0.749939024044,-5.00001E-02));+#13551 = CARTESIAN_POINT('',(0.499865960239,-5.00001E-02));+#13552 = CARTESIAN_POINT('',(0.249860121263,-5.00001E-02));+#13553 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#13554 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13555 = ORIENTED_EDGE('',*,*,#13556,.T.);+#13556 = EDGE_CURVE('',#13528,#13557,#13559,.T.);+#13557 = VERTEX_POINT('',#13558);+#13558 = CARTESIAN_POINT('',(0.897740353139,-9.483588855562E-02,1.75));+#13559 = SURFACE_CURVE('',#13560,(#13566,#13575),.PCURVE_S1.);+#13560 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#13561,#13562,#13563,#13564,+ #13565),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#13561 = CARTESIAN_POINT('',(0.912512298397,-5.495163635933E-02,1.75));+#13562 = CARTESIAN_POINT('',(0.912512298397,-6.882949917019E-02,1.75));+#13563 = CARTESIAN_POINT('',(0.910053062922,-8.010859213072E-02,1.75));+#13564 = CARTESIAN_POINT('',(0.905128182494,-8.877786848506E-02,1.75));+#13565 = CARTESIAN_POINT('',(0.897740353139,-9.483588855562E-02,1.75));+#13566 = PCURVE('',#13424,#13567);+#13567 = DEFINITIONAL_REPRESENTATION('',(#13568),#13574);+#13568 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#13569,#13570,#13571,#13572,+ #13573),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#13569 = CARTESIAN_POINT('',(3.404698820373,-0.699559958907));+#13570 = CARTESIAN_POINT('',(3.415836591015,-0.691280759591));+#13571 = CARTESIAN_POINT('',(3.423421580954,-0.682578248185));+#13572 = CARTESIAN_POINT('',(3.4274411008,-0.673453870948));+#13573 = CARTESIAN_POINT('',(3.427895603517,-0.663910650474));+#13574 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13575 = PCURVE('',#12745,#13576);+#13576 = DEFINITIONAL_REPRESENTATION('',(#13577),#13583);+#13577 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#13578,#13579,#13580,#13581,+ #13582),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#13578 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#13579 = CARTESIAN_POINT('',(0.750139815989,-5.00001E-02));+#13580 = CARTESIAN_POINT('',(0.500135242524,-5.00001E-02));+#13581 = CARTESIAN_POINT('',(0.250062846341,-5.00001E-02));+#13582 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#13583 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13584 = ORIENTED_EDGE('',*,*,#13585,.T.);+#13585 = EDGE_CURVE('',#13557,#13586,#13588,.T.);+#13586 = VERTEX_POINT('',#13587);+#13587 = CARTESIAN_POINT('',(0.848303576343,-0.106948883667,1.75));+#13588 = SURFACE_CURVE('',#13589,(#13595,#13604),.PCURVE_S1.);+#13589 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#13590,#13591,#13592,#13593,+ #13594),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#13590 = CARTESIAN_POINT('',(0.897740353139,-9.483588855562E-02,1.75));+#13591 = CARTESIAN_POINT('',(0.890349545886,-0.100896350503,1.75));+#13592 = CARTESIAN_POINT('',(0.879640355514,-0.104934145241,1.75));+#13593 = CARTESIAN_POINT('',(0.865618428462,-0.106948883667,1.75));+#13594 = CARTESIAN_POINT('',(0.848303576343,-0.106948883667,1.75));+#13595 = PCURVE('',#13424,#13596);+#13596 = DEFINITIONAL_REPRESENTATION('',(#13597),#13603);+#13597 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#13598,#13599,#13600,#13601,+ #13602),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#13598 = CARTESIAN_POINT('',(3.427895603517,-0.663910650474));+#13599 = CARTESIAN_POINT('',(3.428350289436,-0.654363583302));+#13600 = CARTESIAN_POINT('',(3.425202002808,-0.643360000427));+#13601 = CARTESIAN_POINT('',(3.418453799886,-0.630904665566));+#13602 = CARTESIAN_POINT('',(3.408124175377,-0.617008516409));+#13603 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13604 = PCURVE('',#12715,#13605);+#13605 = DEFINITIONAL_REPRESENTATION('',(#13606),#13612);+#13606 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#13607,#13608,#13609,#13610,+ #13611),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#13607 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#13608 = CARTESIAN_POINT('',(0.749836357907,-5.00001E-02));+#13609 = CARTESIAN_POINT('',(0.499721692678,-5.00001E-02));+#13610 = CARTESIAN_POINT('',(0.249746664707,-5.00001E-02));+#13611 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#13612 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13613 = ORIENTED_EDGE('',*,*,#13614,.T.);+#13614 = EDGE_CURVE('',#13586,#13485,#13615,.T.);+#13615 = SURFACE_CURVE('',#13616,(#13620,#13626),.PCURVE_S1.);+#13616 = LINE('',#13617,#13618);+#13617 = CARTESIAN_POINT('',(-0.439427664797,-0.106948883667,1.75));+#13618 = VECTOR('',#13619,1.);+#13619 = DIRECTION('',(-1.,-0.,-0.));+#13620 = PCURVE('',#13424,#13621);+#13621 = DEFINITIONAL_REPRESENTATION('',(#13622),#13625);+#13622 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#13623,#13624),.UNSPECIFIED.,+ .F.,.F.,(2,2),(-1.28773124114,-1.240657975585),+ .PIECEWISE_BEZIER_KNOTS.);+#13623 = CARTESIAN_POINT('',(3.408124175377,-0.617008516409));+#13624 = CARTESIAN_POINT('',(3.380041396832,-0.579229555607));+#13625 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13626 = PCURVE('',#12687,#13627);+#13627 = DEFINITIONAL_REPRESENTATION('',(#13628),#13631);+#13628 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#13629,#13630),.UNSPECIFIED.,+ .F.,.F.,(2,2),(-1.28773124114,-1.240657975585),+ .PIECEWISE_BEZIER_KNOTS.);+#13629 = CARTESIAN_POINT('',(4.707326555513E-02,-5.00001E-02));+#13630 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#13631 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13632 = ADVANCED_FACE('',(#13633),#12775,.T.);+#13633 = FACE_BOUND('',#13634,.T.);+#13634 = EDGE_LOOP('',(#13635,#13636,#13657,#13658));+#13635 = ORIENTED_EDGE('',*,*,#13527,.T.);+#13636 = ORIENTED_EDGE('',*,*,#13637,.T.);+#13637 = EDGE_CURVE('',#13528,#12730,#13638,.T.);+#13638 = SURFACE_CURVE('',#13639,(#13643,#13650),.PCURVE_S1.);+#13639 = LINE('',#13640,#13641);+#13640 = CARTESIAN_POINT('',(0.912512298397,-5.495163635933E-02,+ 1.8000001));+#13641 = VECTOR('',#13642,1.);+#13642 = DIRECTION('',(-0.,-0.,-1.));+#13643 = PCURVE('',#12775,#13644);+#13644 = DEFINITIONAL_REPRESENTATION('',(#13645),#13649);+#13645 = LINE('',#13646,#13647);+#13646 = CARTESIAN_POINT('',(0.,0.));+#13647 = VECTOR('',#13648,1.);+#13648 = DIRECTION('',(0.,-1.));+#13649 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13650 = PCURVE('',#12745,#13651);+#13651 = DEFINITIONAL_REPRESENTATION('',(#13652),#13656);+#13652 = LINE('',#13653,#13654);+#13653 = CARTESIAN_POINT('',(1.,0.));+#13654 = VECTOR('',#13655,1.);+#13655 = DIRECTION('',(0.,-1.));+#13656 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13657 = ORIENTED_EDGE('',*,*,#12759,.T.);+#13658 = ORIENTED_EDGE('',*,*,#13438,.F.);+#13659 = ADVANCED_FACE('',(#13660),#12745,.T.);+#13660 = FACE_BOUND('',#13661,.T.);+#13661 = EDGE_LOOP('',(#13662,#13663,#13684,#13685));+#13662 = ORIENTED_EDGE('',*,*,#13556,.T.);+#13663 = ORIENTED_EDGE('',*,*,#13664,.T.);+#13664 = EDGE_CURVE('',#13557,#12700,#13665,.T.);+#13665 = SURFACE_CURVE('',#13666,(#13670,#13677),.PCURVE_S1.);+#13666 = LINE('',#13667,#13668);+#13667 = CARTESIAN_POINT('',(0.897740353139,-9.483588855562E-02,+ 1.8000001));+#13668 = VECTOR('',#13669,1.);+#13669 = DIRECTION('',(-0.,-0.,-1.));+#13670 = PCURVE('',#12745,#13671);+#13671 = DEFINITIONAL_REPRESENTATION('',(#13672),#13676);+#13672 = LINE('',#13673,#13674);+#13673 = CARTESIAN_POINT('',(0.,0.));+#13674 = VECTOR('',#13675,1.);+#13675 = DIRECTION('',(0.,-1.));+#13676 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13677 = PCURVE('',#12715,#13678);+#13678 = DEFINITIONAL_REPRESENTATION('',(#13679),#13683);+#13679 = LINE('',#13680,#13681);+#13680 = CARTESIAN_POINT('',(1.,0.));+#13681 = VECTOR('',#13682,1.);+#13682 = DIRECTION('',(0.,-1.));+#13683 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13684 = ORIENTED_EDGE('',*,*,#12729,.T.);+#13685 = ORIENTED_EDGE('',*,*,#13637,.F.);+#13686 = ADVANCED_FACE('',(#13687),#12715,.T.);+#13687 = FACE_BOUND('',#13688,.T.);+#13688 = EDGE_LOOP('',(#13689,#13690,#13711,#13712));+#13689 = ORIENTED_EDGE('',*,*,#13585,.T.);+#13690 = ORIENTED_EDGE('',*,*,#13691,.T.);+#13691 = EDGE_CURVE('',#13586,#12672,#13692,.T.);+#13692 = SURFACE_CURVE('',#13693,(#13697,#13704),.PCURVE_S1.);+#13693 = LINE('',#13694,#13695);+#13694 = CARTESIAN_POINT('',(0.848303576343,-0.106948883667,1.8000001));+#13695 = VECTOR('',#13696,1.);+#13696 = DIRECTION('',(-0.,-0.,-1.));+#13697 = PCURVE('',#12715,#13698);+#13698 = DEFINITIONAL_REPRESENTATION('',(#13699),#13703);+#13699 = LINE('',#13700,#13701);+#13700 = CARTESIAN_POINT('',(0.,0.));+#13701 = VECTOR('',#13702,1.);+#13702 = DIRECTION('',(0.,-1.));+#13703 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13704 = PCURVE('',#12687,#13705);+#13705 = DEFINITIONAL_REPRESENTATION('',(#13706),#13710);+#13706 = LINE('',#13707,#13708);+#13707 = CARTESIAN_POINT('',(4.707326555513E-02,0.));+#13708 = VECTOR('',#13709,1.);+#13709 = DIRECTION('',(0.,-1.));+#13710 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13711 = ORIENTED_EDGE('',*,*,#12699,.T.);+#13712 = ORIENTED_EDGE('',*,*,#13664,.F.);+#13713 = ADVANCED_FACE('',(#13714),#12687,.T.);+#13714 = FACE_BOUND('',#13715,.T.);+#13715 = EDGE_LOOP('',(#13716,#13717,#13738,#13739));+#13716 = ORIENTED_EDGE('',*,*,#13614,.T.);+#13717 = ORIENTED_EDGE('',*,*,#13718,.T.);+#13718 = EDGE_CURVE('',#13485,#12644,#13719,.T.);+#13719 = SURFACE_CURVE('',#13720,(#13724,#13731),.PCURVE_S1.);+#13720 = LINE('',#13721,#13722);+#13721 = CARTESIAN_POINT('',(0.801230310788,-0.106948883667,1.8000001));+#13722 = VECTOR('',#13723,1.);+#13723 = DIRECTION('',(-0.,-0.,-1.));+#13724 = PCURVE('',#12687,#13725);+#13725 = DEFINITIONAL_REPRESENTATION('',(#13726),#13730);+#13726 = LINE('',#13727,#13728);+#13727 = CARTESIAN_POINT('',(0.,0.));+#13728 = VECTOR('',#13729,1.);+#13729 = DIRECTION('',(0.,-1.));+#13730 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13731 = PCURVE('',#12659,#13732);+#13732 = DEFINITIONAL_REPRESENTATION('',(#13733),#13737);+#13733 = LINE('',#13734,#13735);+#13734 = CARTESIAN_POINT('',(0.107736720748,0.));+#13735 = VECTOR('',#13736,1.);+#13736 = DIRECTION('',(0.,-1.));+#13737 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13738 = ORIENTED_EDGE('',*,*,#12671,.T.);+#13739 = ORIENTED_EDGE('',*,*,#13691,.F.);+#13740 = ADVANCED_FACE('',(#13741),#12659,.T.);+#13741 = FACE_BOUND('',#13742,.T.);+#13742 = EDGE_LOOP('',(#13743,#13744,#13765,#13766));+#13743 = ORIENTED_EDGE('',*,*,#13484,.T.);+#13744 = ORIENTED_EDGE('',*,*,#13745,.T.);+#13745 = EDGE_CURVE('',#13487,#12616,#13746,.T.);+#13746 = SURFACE_CURVE('',#13747,(#13751,#13758),.PCURVE_S1.);+#13747 = LINE('',#13748,#13749);+#13748 = CARTESIAN_POINT('',(0.801230310788,7.878370804205E-04,1.8000001+ ));+#13749 = VECTOR('',#13750,1.);+#13750 = DIRECTION('',(-0.,-0.,-1.));+#13751 = PCURVE('',#12659,#13752);+#13752 = DEFINITIONAL_REPRESENTATION('',(#13753),#13757);+#13753 = LINE('',#13754,#13755);+#13754 = CARTESIAN_POINT('',(0.,0.));+#13755 = VECTOR('',#13756,1.);+#13756 = DIRECTION('',(0.,-1.));+#13757 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13758 = PCURVE('',#12631,#13759);+#13759 = DEFINITIONAL_REPRESENTATION('',(#13760),#13764);+#13760 = LINE('',#13761,#13762);+#13761 = CARTESIAN_POINT('',(4.707326555513E-02,0.));+#13762 = VECTOR('',#13763,1.);+#13763 = DIRECTION('',(0.,-1.));+#13764 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13765 = ORIENTED_EDGE('',*,*,#12643,.T.);+#13766 = ORIENTED_EDGE('',*,*,#13718,.F.);+#13767 = ADVANCED_FACE('',(#13768),#12631,.T.);+#13768 = FACE_BOUND('',#13769,.T.);+#13769 = EDGE_LOOP('',(#13770,#13771,#13772,#13773));+#13770 = ORIENTED_EDGE('',*,*,#13507,.T.);+#13771 = ORIENTED_EDGE('',*,*,#13460,.T.);+#13772 = ORIENTED_EDGE('',*,*,#12613,.T.);+#13773 = ORIENTED_EDGE('',*,*,#13745,.F.);+#13774 = ADVANCED_FACE('',(#13775),#2971,.T.);+#13775 = FACE_BOUND('',#13776,.T.);+#13776 = EDGE_LOOP('',(#13777,#13778,#13779,#13780));+#13777 = ORIENTED_EDGE('',*,*,#2945,.T.);+#13778 = ORIENTED_EDGE('',*,*,#12358,.T.);+#13779 = ORIENTED_EDGE('',*,*,#12429,.T.);+#13780 = ORIENTED_EDGE('',*,*,#13781,.F.);+#13781 = EDGE_CURVE('',#2910,#12430,#13782,.T.);+#13782 = SURFACE_CURVE('',#13783,(#13787,#13794),.PCURVE_S1.);+#13783 = LINE('',#13784,#13785);+#13784 = CARTESIAN_POINT('',(0.942253148183,7.976850439258E-02,1.8000001+ ));+#13785 = VECTOR('',#13786,1.);+#13786 = DIRECTION('',(-0.,-0.,-1.));+#13787 = PCURVE('',#2971,#13788);+#13788 = DEFINITIONAL_REPRESENTATION('',(#13789),#13793);+#13789 = LINE('',#13790,#13791);+#13790 = CARTESIAN_POINT('',(1.,0.));+#13791 = VECTOR('',#13792,1.);+#13792 = DIRECTION('',(0.,-1.));+#13793 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13794 = PCURVE('',#2929,#13795);+#13795 = DEFINITIONAL_REPRESENTATION('',(#13796),#13800);+#13796 = LINE('',#13797,#13798);+#13797 = CARTESIAN_POINT('',(0.,0.));+#13798 = VECTOR('',#13799,1.);+#13799 = DIRECTION('',(0.,-1.));+#13800 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13801 = ADVANCED_FACE('',(#13802),#2929,.T.);+#13802 = FACE_BOUND('',#13803,.T.);+#13803 = EDGE_LOOP('',(#13804,#13805,#13806,#13807));+#13804 = ORIENTED_EDGE('',*,*,#2909,.T.);+#13805 = ORIENTED_EDGE('',*,*,#13781,.T.);+#13806 = ORIENTED_EDGE('',*,*,#12452,.T.);+#13807 = ORIENTED_EDGE('',*,*,#13808,.F.);+#13808 = EDGE_CURVE('',#2874,#12453,#13809,.T.);+#13809 = SURFACE_CURVE('',#13810,(#13814,#13821),.PCURVE_S1.);+#13810 = LINE('',#13811,#13812);+#13811 = CARTESIAN_POINT('',(0.929352315991,3.722530204987E-02,1.8000001+ ));+#13812 = VECTOR('',#13813,1.);+#13813 = DIRECTION('',(-0.,-0.,-1.));+#13814 = PCURVE('',#2929,#13815);+#13815 = DEFINITIONAL_REPRESENTATION('',(#13816),#13820);+#13816 = LINE('',#13817,#13818);+#13817 = CARTESIAN_POINT('',(1.,0.));+#13818 = VECTOR('',#13819,1.);+#13819 = DIRECTION('',(0.,-1.));+#13820 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13821 = PCURVE('',#2893,#13822);+#13822 = DEFINITIONAL_REPRESENTATION('',(#13823),#13827);+#13823 = LINE('',#13824,#13825);+#13824 = CARTESIAN_POINT('',(0.,0.));+#13825 = VECTOR('',#13826,1.);+#13826 = DIRECTION('',(0.,-1.));+#13827 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13828 = ADVANCED_FACE('',(#13829),#2893,.T.);+#13829 = FACE_BOUND('',#13830,.T.);+#13830 = EDGE_LOOP('',(#13831,#13832,#13833,#13834));+#13831 = ORIENTED_EDGE('',*,*,#2873,.T.);+#13832 = ORIENTED_EDGE('',*,*,#13808,.T.);+#13833 = ORIENTED_EDGE('',*,*,#12475,.T.);+#13834 = ORIENTED_EDGE('',*,*,#13835,.F.);+#13835 = EDGE_CURVE('',#2829,#12476,#13836,.T.);+#13836 = SURFACE_CURVE('',#13837,(#13841,#13848),.PCURVE_S1.);+#13837 = LINE('',#13838,#13839);+#13838 = CARTESIAN_POINT('',(0.890649819415,1.772633430946E-02,1.8000001+ ));+#13839 = VECTOR('',#13840,1.);+#13840 = DIRECTION('',(-0.,-0.,-1.));+#13841 = PCURVE('',#2893,#13842);+#13842 = DEFINITIONAL_REPRESENTATION('',(#13843),#13847);+#13843 = LINE('',#13844,#13845);+#13844 = CARTESIAN_POINT('',(1.,0.));+#13845 = VECTOR('',#13846,1.);+#13846 = DIRECTION('',(0.,-1.));+#13847 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13848 = PCURVE('',#2854,#13849);+#13849 = DEFINITIONAL_REPRESENTATION('',(#13850),#13854);+#13850 = LINE('',#13851,#13852);+#13851 = CARTESIAN_POINT('',(0.,0.));+#13852 = VECTOR('',#13853,1.);+#13853 = DIRECTION('',(0.,-1.));+#13854 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13855 = ADVANCED_FACE('',(#13856),#2854,.T.);+#13856 = FACE_BOUND('',#13857,.T.);+#13857 = EDGE_LOOP('',(#13858,#13859,#13860,#13861));+#13858 = ORIENTED_EDGE('',*,*,#2828,.T.);+#13859 = ORIENTED_EDGE('',*,*,#13835,.T.);+#13860 = ORIENTED_EDGE('',*,*,#12498,.T.);+#13861 = ORIENTED_EDGE('',*,*,#13862,.F.);+#13862 = EDGE_CURVE('',#2793,#12499,#13863,.T.);+#13863 = SURFACE_CURVE('',#13864,(#13868,#13875),.PCURVE_S1.);+#13864 = LINE('',#13865,#13866);+#13865 = CARTESIAN_POINT('',(0.936048931175,-6.992054088732E-03,+ 1.8000001));+#13866 = VECTOR('',#13867,1.);+#13867 = DIRECTION('',(-0.,-0.,-1.));+#13868 = PCURVE('',#2854,#13869);+#13869 = DEFINITIONAL_REPRESENTATION('',(#13870),#13874);+#13870 = LINE('',#13871,#13872);+#13871 = CARTESIAN_POINT('',(1.,0.));+#13872 = VECTOR('',#13873,1.);+#13873 = DIRECTION('',(0.,-1.));+#13874 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13875 = PCURVE('',#2812,#13876);+#13876 = DEFINITIONAL_REPRESENTATION('',(#13877),#13881);+#13877 = LINE('',#13878,#13879);+#13878 = CARTESIAN_POINT('',(0.,0.));+#13879 = VECTOR('',#13880,1.);+#13880 = DIRECTION('',(0.,-1.));+#13881 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13882 = ADVANCED_FACE('',(#13883),#2812,.T.);+#13883 = FACE_BOUND('',#13884,.T.);+#13884 = EDGE_LOOP('',(#13885,#13886,#13887,#13888));+#13885 = ORIENTED_EDGE('',*,*,#2792,.T.);+#13886 = ORIENTED_EDGE('',*,*,#13862,.T.);+#13887 = ORIENTED_EDGE('',*,*,#12521,.T.);+#13888 = ORIENTED_EDGE('',*,*,#13889,.F.);+#13889 = EDGE_CURVE('',#2748,#12522,#13890,.T.);+#13890 = SURFACE_CURVE('',#13891,(#13895,#13902),.PCURVE_S1.);+#13891 = LINE('',#13892,#13893);+#13892 = CARTESIAN_POINT('',(0.952495030228,-5.889082176143E-02,+ 1.8000001));+#13893 = VECTOR('',#13894,1.);+#13894 = DIRECTION('',(-0.,-0.,-1.));+#13895 = PCURVE('',#2812,#13896);+#13896 = DEFINITIONAL_REPRESENTATION('',(#13897),#13901);+#13897 = LINE('',#13898,#13899);+#13898 = CARTESIAN_POINT('',(1.,0.));+#13899 = VECTOR('',#13900,1.);+#13900 = DIRECTION('',(0.,-1.));+#13901 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13902 = PCURVE('',#2773,#13903);+#13903 = DEFINITIONAL_REPRESENTATION('',(#13904),#13908);+#13904 = LINE('',#13905,#13906);+#13905 = CARTESIAN_POINT('',(0.,0.));+#13906 = VECTOR('',#13907,1.);+#13907 = DIRECTION('',(0.,-1.));+#13908 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13909 = ADVANCED_FACE('',(#13910),#2773,.T.);+#13910 = FACE_BOUND('',#13911,.T.);+#13911 = EDGE_LOOP('',(#13912,#13913,#13914,#13915));+#13912 = ORIENTED_EDGE('',*,*,#2747,.T.);+#13913 = ORIENTED_EDGE('',*,*,#13889,.T.);+#13914 = ORIENTED_EDGE('',*,*,#12544,.T.);+#13915 = ORIENTED_EDGE('',*,*,#13916,.F.);+#13916 = EDGE_CURVE('',#2712,#12545,#13917,.T.);+#13917 = SURFACE_CURVE('',#13918,(#13922,#13929),.PCURVE_S1.);+#13918 = LINE('',#13919,#13920);+#13919 = CARTESIAN_POINT('',(0.926299447304,-0.119258838049,1.8000001));+#13920 = VECTOR('',#13921,1.);+#13921 = DIRECTION('',(-0.,-0.,-1.));+#13922 = PCURVE('',#2773,#13923);+#13923 = DEFINITIONAL_REPRESENTATION('',(#13924),#13928);+#13924 = LINE('',#13925,#13926);+#13925 = CARTESIAN_POINT('',(1.,0.));+#13926 = VECTOR('',#13927,1.);+#13927 = DIRECTION('',(0.,-1.));+#13928 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13929 = PCURVE('',#2731,#13930);+#13930 = DEFINITIONAL_REPRESENTATION('',(#13931),#13935);+#13931 = LINE('',#13932,#13933);+#13932 = CARTESIAN_POINT('',(0.,0.));+#13933 = VECTOR('',#13934,1.);+#13934 = DIRECTION('',(0.,-1.));+#13935 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13936 = ADVANCED_FACE('',(#13937),#2731,.T.);+#13937 = FACE_BOUND('',#13938,.T.);+#13938 = EDGE_LOOP('',(#13939,#13940,#13941,#13942));+#13939 = ORIENTED_EDGE('',*,*,#2711,.T.);+#13940 = ORIENTED_EDGE('',*,*,#13916,.T.);+#13941 = ORIENTED_EDGE('',*,*,#12567,.T.);+#13942 = ORIENTED_EDGE('',*,*,#13943,.F.);+#13943 = EDGE_CURVE('',#2685,#12568,#13944,.T.);+#13944 = SURFACE_CURVE('',#13945,(#13949,#13956),.PCURVE_S1.);+#13945 = LINE('',#13946,#13947);+#13946 = CARTESIAN_POINT('',(0.848303576343,-0.139644122505,1.8000001));+#13947 = VECTOR('',#13948,1.);+#13948 = DIRECTION('',(-0.,-0.,-1.));+#13949 = PCURVE('',#2731,#13950);+#13950 = DEFINITIONAL_REPRESENTATION('',(#13951),#13955);+#13951 = LINE('',#13952,#13953);+#13952 = CARTESIAN_POINT('',(1.,0.));+#13953 = VECTOR('',#13954,1.);+#13954 = DIRECTION('',(0.,-1.));+#13955 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13956 = PCURVE('',#2700,#13957);+#13957 = DEFINITIONAL_REPRESENTATION('',(#13958),#13962);+#13958 = LINE('',#13959,#13960);+#13959 = CARTESIAN_POINT('',(0.,0.));+#13960 = VECTOR('',#13961,1.);+#13961 = DIRECTION('',(0.,-1.));+#13962 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13963 = ADVANCED_FACE('',(#13964),#2700,.T.);+#13964 = FACE_BOUND('',#13965,.T.);+#13965 = EDGE_LOOP('',(#13966,#13967,#13968,#13969));+#13966 = ORIENTED_EDGE('',*,*,#2684,.T.);+#13967 = ORIENTED_EDGE('',*,*,#13943,.T.);+#13968 = ORIENTED_EDGE('',*,*,#12590,.T.);+#13969 = ORIENTED_EDGE('',*,*,#13970,.F.);+#13970 = EDGE_CURVE('',#2658,#12383,#13971,.T.);+#13971 = SURFACE_CURVE('',#13972,(#13976,#13983),.PCURVE_S1.);+#13972 = LINE('',#13973,#13974);+#13973 = CARTESIAN_POINT('',(0.761247578956,-0.139644122505,1.8000001));+#13974 = VECTOR('',#13975,1.);+#13975 = DIRECTION('',(-0.,-0.,-1.));+#13976 = PCURVE('',#2700,#13977);+#13977 = DEFINITIONAL_REPRESENTATION('',(#13978),#13982);+#13978 = LINE('',#13979,#13980);+#13979 = CARTESIAN_POINT('',(8.705599738647E-02,0.));+#13980 = VECTOR('',#13981,1.);+#13981 = DIRECTION('',(0.,-1.));+#13982 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13983 = PCURVE('',#2673,#13984);+#13984 = DEFINITIONAL_REPRESENTATION('',(#13985),#13989);+#13985 = LINE('',#13986,#13987);+#13986 = CARTESIAN_POINT('',(0.,0.));+#13987 = VECTOR('',#13988,1.);+#13988 = DIRECTION('',(0.,-1.));+#13989 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13990 = ADVANCED_FACE('',(#13991),#2673,.T.);+#13991 = FACE_BOUND('',#13992,.T.);+#13992 = EDGE_LOOP('',(#13993,#13994,#13995,#13996));+#13993 = ORIENTED_EDGE('',*,*,#2657,.T.);+#13994 = ORIENTED_EDGE('',*,*,#13970,.T.);+#13995 = ORIENTED_EDGE('',*,*,#12382,.T.);+#13996 = ORIENTED_EDGE('',*,*,#13997,.F.);+#13997 = EDGE_CURVE('',#2631,#12385,#13998,.T.);+#13998 = SURFACE_CURVE('',#13999,(#14003,#14010),.PCURVE_S1.);+#13999 = LINE('',#14000,#14001);+#14000 = CARTESIAN_POINT('',(0.761247578956,0.154416067762,1.8000001));+#14001 = VECTOR('',#14002,1.);+#14002 = DIRECTION('',(-0.,-0.,-1.));+#14003 = PCURVE('',#2673,#14004);+#14004 = DEFINITIONAL_REPRESENTATION('',(#14005),#14009);+#14005 = LINE('',#14006,#14007);+#14006 = CARTESIAN_POINT('',(0.294060190267,0.));+#14007 = VECTOR('',#14008,1.);+#14008 = DIRECTION('',(0.,-1.));+#14009 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14010 = PCURVE('',#2646,#14011);+#14011 = DEFINITIONAL_REPRESENTATION('',(#14012),#14016);+#14012 = LINE('',#14013,#14014);+#14013 = CARTESIAN_POINT('',(0.,0.));+#14014 = VECTOR('',#14015,1.);+#14015 = DIRECTION('',(0.,-1.));+#14016 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14017 = ADVANCED_FACE('',(#14018),#2646,.T.);+#14018 = FACE_BOUND('',#14019,.T.);+#14019 = EDGE_LOOP('',(#14020,#14021,#14022,#14023));+#14020 = ORIENTED_EDGE('',*,*,#2628,.T.);+#14021 = ORIENTED_EDGE('',*,*,#13997,.T.);+#14022 = ORIENTED_EDGE('',*,*,#12407,.T.);+#14023 = ORIENTED_EDGE('',*,*,#12307,.F.);+#14024 = ADVANCED_FACE('',(#14025),#2359,.F.);+#14025 = FACE_BOUND('',#14026,.F.);+#14026 = EDGE_LOOP('',(#14027,#14028,#14048,#14049));+#14027 = ORIENTED_EDGE('',*,*,#2343,.T.);+#14028 = ORIENTED_EDGE('',*,*,#14029,.T.);+#14029 = EDGE_CURVE('',#2316,#2541,#14030,.T.);+#14030 = SURFACE_CURVE('',#14031,(#14034,#14041),.PCURVE_S1.);+#14031 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#14032,#14033),.UNSPECIFIED.,+ .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#14032 = CARTESIAN_POINT('',(-1.7375,-2.375,1.025));+#14033 = CARTESIAN_POINT('',(-1.680085640382,-2.260171280765,1.75));+#14034 = PCURVE('',#2359,#14035);+#14035 = DEFINITIONAL_REPRESENTATION('',(#14036),#14040);+#14036 = LINE('',#14037,#14038);+#14037 = CARTESIAN_POINT('',(3.475,-6.900828963579E-17));+#14038 = VECTOR('',#14039,1.);+#14039 = DIRECTION('',(0.,1.));+#14040 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14041 = PCURVE('',#2331,#14042);+#14042 = DEFINITIONAL_REPRESENTATION('',(#14043),#14047);+#14043 = LINE('',#14044,#14045);+#14044 = CARTESIAN_POINT('',(2.738217532698E-16,4.809419873548E-17));+#14045 = VECTOR('',#14046,1.);+#14046 = DIRECTION('',(4.627785088841E-16,1.));+#14047 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14048 = ORIENTED_EDGE('',*,*,#2540,.F.);+#14049 = ORIENTED_EDGE('',*,*,#2401,.F.);+#14050 = ADVANCED_FACE('',(#14051),#2331,.F.);+#14051 = FACE_BOUND('',#14052,.F.);+#14052 = EDGE_LOOP('',(#14053,#14054,#14074,#14075));+#14053 = ORIENTED_EDGE('',*,*,#2315,.T.);+#14054 = ORIENTED_EDGE('',*,*,#14055,.T.);+#14055 = EDGE_CURVE('',#2288,#2563,#14056,.T.);+#14056 = SURFACE_CURVE('',#14057,(#14060,#14067),.PCURVE_S1.);+#14057 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#14058,#14059),.UNSPECIFIED.,+ .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#14058 = CARTESIAN_POINT('',(-1.875,-2.2375,1.025));+#14059 = CARTESIAN_POINT('',(-1.760171280765,-2.180085640382,1.75));+#14060 = PCURVE('',#2331,#14061);+#14061 = DEFINITIONAL_REPRESENTATION('',(#14062),#14066);+#14062 = LINE('',#14063,#14064);+#14063 = CARTESIAN_POINT('',(0.194454364826,-2.270112686593E-17));+#14064 = VECTOR('',#14065,1.);+#14065 = DIRECTION('',(0.,1.));+#14066 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14067 = PCURVE('',#2303,#14068);+#14068 = DEFINITIONAL_REPRESENTATION('',(#14069),#14073);+#14069 = LINE('',#14070,#14071);+#14070 = CARTESIAN_POINT('',(-3.069575063905E-17,1.607055245639E-16));+#14071 = VECTOR('',#14072,1.);+#14072 = DIRECTION('',(-3.887832855435E-17,1.));+#14073 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14074 = ORIENTED_EDGE('',*,*,#2562,.F.);+#14075 = ORIENTED_EDGE('',*,*,#14029,.F.);+#14076 = ADVANCED_FACE('',(#14077),#2303,.F.);+#14077 = FACE_BOUND('',#14078,.F.);+#14078 = EDGE_LOOP('',(#14079,#14080,#14100,#14101));+#14079 = ORIENTED_EDGE('',*,*,#2287,.T.);+#14080 = ORIENTED_EDGE('',*,*,#14081,.T.);+#14081 = EDGE_CURVE('',#2260,#2585,#14082,.T.);+#14082 = SURFACE_CURVE('',#14083,(#14086,#14093),.PCURVE_S1.);+#14083 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#14084,#14085),.UNSPECIFIED.,+ .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#14084 = CARTESIAN_POINT('',(-1.875,2.2375,1.025));+#14085 = CARTESIAN_POINT('',(-1.760171280765,2.180085640382,1.75));+#14086 = PCURVE('',#2303,#14087);+#14087 = DEFINITIONAL_REPRESENTATION('',(#14088),#14092);+#14088 = LINE('',#14089,#14090);+#14089 = CARTESIAN_POINT('',(4.475,-2.841128830464E-17));+#14090 = VECTOR('',#14091,1.);+#14091 = DIRECTION('',(0.,1.));+#14092 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14093 = PCURVE('',#2275,#14094);+#14094 = DEFINITIONAL_REPRESENTATION('',(#14095),#14099);+#14095 = LINE('',#14096,#14097);+#14096 = CARTESIAN_POINT('',(-1.958481907314E-16,1.270855007249E-17));+#14097 = VECTOR('',#14098,1.);+#14098 = DIRECTION('',(3.933483957273E-16,1.));+#14099 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14100 = ORIENTED_EDGE('',*,*,#2584,.F.);+#14101 = ORIENTED_EDGE('',*,*,#14055,.F.);+#14102 = ADVANCED_FACE('',(#14103),#2275,.F.);+#14103 = FACE_BOUND('',#14104,.F.);+#14104 = EDGE_LOOP('',(#14105,#14106,#14126,#14127));+#14105 = ORIENTED_EDGE('',*,*,#2259,.T.);+#14106 = ORIENTED_EDGE('',*,*,#14107,.T.);+#14107 = EDGE_CURVE('',#2232,#2474,#14108,.T.);+#14108 = SURFACE_CURVE('',#14109,(#14112,#14119),.PCURVE_S1.);+#14109 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#14110,#14111),.UNSPECIFIED.,+ .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#14110 = CARTESIAN_POINT('',(-1.7375,2.375,1.025));+#14111 = CARTESIAN_POINT('',(-1.680085640382,2.260171280765,1.75));+#14112 = PCURVE('',#2275,#14113);+#14113 = DEFINITIONAL_REPRESENTATION('',(#14114),#14118);+#14114 = LINE('',#14115,#14116);+#14115 = CARTESIAN_POINT('',(0.194454364826,8.346321558809E-17));+#14116 = VECTOR('',#14117,1.);+#14117 = DIRECTION('',(-8.326672684689E-17,1.));+#14118 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14119 = PCURVE('',#2247,#14120);+#14120 = DEFINITIONAL_REPRESENTATION('',(#14121),#14125);+#14121 = LINE('',#14122,#14123);+#14122 = CARTESIAN_POINT('',(-4.2621274328E-17,2.564255928447E-17));+#14123 = VECTOR('',#14124,1.);+#14124 = DIRECTION('',(2.060577736657E-16,1.));+#14125 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14126 = ORIENTED_EDGE('',*,*,#2606,.F.);+#14127 = ORIENTED_EDGE('',*,*,#14081,.F.);+#14128 = ADVANCED_FACE('',(#14129),#2247,.F.);+#14129 = FACE_BOUND('',#14130,.F.);+#14130 = EDGE_LOOP('',(#14131,#14132,#14152,#14153));+#14131 = ORIENTED_EDGE('',*,*,#2231,.T.);+#14132 = ORIENTED_EDGE('',*,*,#14133,.T.);+#14133 = EDGE_CURVE('',#2204,#2476,#14134,.T.);+#14134 = SURFACE_CURVE('',#14135,(#14138,#14145),.PCURVE_S1.);+#14135 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#14136,#14137),.UNSPECIFIED.,+ .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#14136 = CARTESIAN_POINT('',(1.7375,2.375,1.025));+#14137 = CARTESIAN_POINT('',(1.680085640382,2.260171280765,1.75));+#14138 = PCURVE('',#2247,#14139);+#14139 = DEFINITIONAL_REPRESENTATION('',(#14140),#14144);+#14140 = LINE('',#14141,#14142);+#14141 = CARTESIAN_POINT('',(3.475,-6.900828963579E-17));+#14142 = VECTOR('',#14143,1.);+#14143 = DIRECTION('',(0.,1.));+#14144 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14145 = PCURVE('',#2219,#14146);+#14146 = DEFINITIONAL_REPRESENTATION('',(#14147),#14151);+#14147 = LINE('',#14148,#14149);+#14148 = CARTESIAN_POINT('',(2.738217532698E-16,4.809419873548E-17));+#14149 = VECTOR('',#14150,1.);+#14150 = DIRECTION('',(4.627785088841E-16,1.));+#14151 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14152 = ORIENTED_EDGE('',*,*,#2473,.F.);+#14153 = ORIENTED_EDGE('',*,*,#14107,.F.);+#14154 = ADVANCED_FACE('',(#14155),#2219,.F.);+#14155 = FACE_BOUND('',#14156,.F.);+#14156 = EDGE_LOOP('',(#14157,#14158,#14178,#14179));+#14157 = ORIENTED_EDGE('',*,*,#2203,.T.);+#14158 = ORIENTED_EDGE('',*,*,#14159,.T.);+#14159 = EDGE_CURVE('',#2174,#2498,#14160,.T.);+#14160 = SURFACE_CURVE('',#14161,(#14164,#14171),.PCURVE_S1.);+#14161 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#14162,#14163),.UNSPECIFIED.,+ .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#14162 = CARTESIAN_POINT('',(1.875,2.2375,1.025));+#14163 = CARTESIAN_POINT('',(1.760171280765,2.180085640382,1.75));+#14164 = PCURVE('',#2219,#14165);+#14165 = DEFINITIONAL_REPRESENTATION('',(#14166),#14170);+#14166 = LINE('',#14167,#14168);+#14167 = CARTESIAN_POINT('',(0.194454364826,-2.270112686593E-17));+#14168 = VECTOR('',#14169,1.);+#14169 = DIRECTION('',(0.,1.));+#14170 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14171 = PCURVE('',#2191,#14172);+#14172 = DEFINITIONAL_REPRESENTATION('',(#14173),#14177);+#14173 = LINE('',#14174,#14175);+#14174 = CARTESIAN_POINT('',(-3.069575063905E-17,1.607055245639E-16));+#14175 = VECTOR('',#14176,1.);+#14176 = DIRECTION('',(-3.887832855435E-17,1.));+#14177 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14178 = ORIENTED_EDGE('',*,*,#2497,.F.);+#14179 = ORIENTED_EDGE('',*,*,#14133,.F.);+#14180 = ADVANCED_FACE('',(#14181),#2191,.F.);+#14181 = FACE_BOUND('',#14182,.F.);+#14182 = EDGE_LOOP('',(#14183,#14184,#14185,#14186));+#14183 = ORIENTED_EDGE('',*,*,#2173,.T.);+#14184 = ORIENTED_EDGE('',*,*,#2450,.T.);+#14185 = ORIENTED_EDGE('',*,*,#2519,.F.);+#14186 = ORIENTED_EDGE('',*,*,#14159,.F.);+#14187 = ADVANCED_FACE('',(#14188),#2138,.T.);+#14188 = FACE_BOUND('',#14189,.T.);+#14189 = EDGE_LOOP('',(#14190,#14211,#14234,#14267,#14295,#14324,#14352,+ #14380,#14408,#14441,#14469,#14491));+#14190 = ORIENTED_EDGE('',*,*,#14191,.F.);+#14191 = EDGE_CURVE('',#263,#2123,#14192,.T.);+#14192 = SURFACE_CURVE('',#14193,(#14197,#14204),.PCURVE_S1.);+#14193 = LINE('',#14194,#14195);+#14194 = CARTESIAN_POINT('',(-1.95,2.11,0.786976568901));+#14195 = VECTOR('',#14196,1.);+#14196 = DIRECTION('',(0.,0.,1.));+#14197 = PCURVE('',#2138,#14198);+#14198 = DEFINITIONAL_REPRESENTATION('',(#14199),#14203);+#14199 = LINE('',#14200,#14201);+#14200 = CARTESIAN_POINT('',(0.238023431098,0.47560961319));+#14201 = VECTOR('',#14202,1.);+#14202 = DIRECTION('',(1.,0.));+#14203 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14204 = PCURVE('',#278,#14205);+#14205 = DEFINITIONAL_REPRESENTATION('',(#14206),#14210);+#14206 = LINE('',#14207,#14208);+#14207 = CARTESIAN_POINT('',(4.385,-0.238023431099));+#14208 = VECTOR('',#14209,1.);+#14209 = DIRECTION('',(0.,1.));+#14210 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14211 = ORIENTED_EDGE('',*,*,#14212,.T.);+#14212 = EDGE_CURVE('',#263,#14213,#14215,.T.);+#14213 = VERTEX_POINT('',#14214);+#14214 = CARTESIAN_POINT('',(-2.25,2.11,0.825));+#14215 = SURFACE_CURVE('',#14216,(#14220,#14227),.PCURVE_S1.);+#14216 = LINE('',#14217,#14218);+#14217 = CARTESIAN_POINT('',(-1.8,2.11,0.825));+#14218 = VECTOR('',#14219,1.);+#14219 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#14220 = PCURVE('',#2138,#14221);+#14221 = DEFINITIONAL_REPRESENTATION('',(#14222),#14226);+#14222 = LINE('',#14223,#14224);+#14223 = CARTESIAN_POINT('',(0.276046862197,0.62560961319));+#14224 = VECTOR('',#14225,1.);+#14225 = DIRECTION('',(0.,-1.));+#14226 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14227 = PCURVE('',#306,#14228);+#14228 = DEFINITIONAL_REPRESENTATION('',(#14229),#14233);+#14229 = LINE('',#14230,#14231);+#14230 = CARTESIAN_POINT('',(4.69137475541E-18,-0.41));+#14231 = VECTOR('',#14232,1.);+#14232 = DIRECTION('',(1.,0.));+#14233 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14234 = ORIENTED_EDGE('',*,*,#14235,.T.);+#14235 = EDGE_CURVE('',#14213,#14236,#14238,.T.);+#14236 = VERTEX_POINT('',#14237);+#14237 = CARTESIAN_POINT('',(-2.348480775301,2.11,0.742364817767));+#14238 = SURFACE_CURVE('',#14239,(#14244,#14255),.PCURVE_S1.);+#14239 = CIRCLE('',#14240,0.1);+#14240 = AXIS2_PLACEMENT_3D('',#14241,#14242,#14243);+#14241 = CARTESIAN_POINT('',(-2.25,2.11,0.725));+#14242 = DIRECTION('',(-1.144237745222E-17,-1.,3.284293275761E-47));+#14243 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.));+#14244 = PCURVE('',#2138,#14245);+#14245 = DEFINITIONAL_REPRESENTATION('',(#14246),#14254);+#14246 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#14247,#14248,#14249,#14250+ ,#14251,#14252,#14253),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#14247 = CARTESIAN_POINT('',(0.276046862197,0.17560961319));+#14248 = CARTESIAN_POINT('',(0.276046862197,2.404532433112E-03));+#14249 = CARTESIAN_POINT('',(0.126046862197,8.900707281156E-02));+#14250 = CARTESIAN_POINT('',(-2.3953137803E-02,0.17560961319));+#14251 = CARTESIAN_POINT('',(0.126046862197,0.262212153568));+#14252 = CARTESIAN_POINT('',(0.276046862197,0.348814693947));+#14253 = CARTESIAN_POINT('',(0.276046862197,0.17560961319));+#14254 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14255 = PCURVE('',#14256,#14261);+#14256 = CYLINDRICAL_SURFACE('',#14257,0.1);+#14257 = AXIS2_PLACEMENT_3D('',#14258,#14259,#14260);+#14258 = CARTESIAN_POINT('',(-2.25,1.7,0.725));+#14259 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#14260 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.));+#14261 = DEFINITIONAL_REPRESENTATION('',(#14262),#14266);+#14262 = LINE('',#14263,#14264);+#14263 = CARTESIAN_POINT('',(0.,-0.41));+#14264 = VECTOR('',#14265,1.);+#14265 = DIRECTION('',(1.,0.));+#14266 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14267 = ORIENTED_EDGE('',*,*,#14268,.T.);+#14268 = EDGE_CURVE('',#14236,#14269,#14271,.T.);+#14269 = VERTEX_POINT('',#14270);+#14270 = CARTESIAN_POINT('',(-2.429496640897,2.11,0.2479055467));+#14271 = SURFACE_CURVE('',#14272,(#14276,#14283),.PCURVE_S1.);+#14272 = LINE('',#14273,#14274);+#14273 = CARTESIAN_POINT('',(-2.348480775301,2.11,0.742364817767));+#14274 = VECTOR('',#14275,1.);+#14275 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087+ ));+#14276 = PCURVE('',#2138,#14277);+#14277 = DEFINITIONAL_REPRESENTATION('',(#14278),#14282);+#14278 = LINE('',#14279,#14280);+#14279 = CARTESIAN_POINT('',(0.193411679964,7.7128837889E-02));+#14280 = VECTOR('',#14281,1.);+#14281 = DIRECTION('',(-0.986841372087,-0.161691392282));+#14282 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14283 = PCURVE('',#14284,#14289);+#14284 = PLANE('',#14285);+#14285 = AXIS2_PLACEMENT_3D('',#14286,#14287,#14288);+#14286 = CARTESIAN_POINT('',(-2.348480775301,1.7,0.742364817767));+#14287 = DIRECTION('',(-0.986841372087,1.129181146488E-17,0.161691392282+ ));+#14288 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087+ ));+#14289 = DEFINITIONAL_REPRESENTATION('',(#14290),#14294);+#14290 = LINE('',#14291,#14292);+#14291 = CARTESIAN_POINT('',(7.585549159209E-19,-0.41));+#14292 = VECTOR('',#14293,1.);+#14293 = DIRECTION('',(1.,5.984962792299E-34));+#14294 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14295 = ORIENTED_EDGE('',*,*,#14296,.T.);+#14296 = EDGE_CURVE('',#14269,#14297,#14299,.T.);+#14297 = VERTEX_POINT('',#14298);+#14298 = CARTESIAN_POINT('',(-2.724938966801,2.11,-1.665334536938E-16));+#14299 = SURFACE_CURVE('',#14300,(#14305,#14312),.PCURVE_S1.);+#14300 = CIRCLE('',#14301,0.3);+#14301 = AXIS2_PLACEMENT_3D('',#14302,#14303,#14304);+#14302 = CARTESIAN_POINT('',(-2.724938966801,2.11,0.3));+#14303 = DIRECTION('',(1.144237745222E-17,1.,7.703719777549E-34));+#14304 = DIRECTION('',(0.984807753012,-1.126854202784E-17,+ -0.173648177667));+#14305 = PCURVE('',#2138,#14306);+#14306 = DEFINITIONAL_REPRESENTATION('',(#14307),#14311);+#14307 = CIRCLE('',#14308,0.3);+#14308 = AXIS2_PLACEMENT_2D('',#14309,#14310);+#14309 = CARTESIAN_POINT('',(-0.248953137803,-0.299329353611));+#14310 = DIRECTION('',(-0.173648177667,0.984807753012));+#14311 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14312 = PCURVE('',#14313,#14318);+#14313 = CYLINDRICAL_SURFACE('',#14314,0.3);+#14314 = AXIS2_PLACEMENT_3D('',#14315,#14316,#14317);+#14315 = CARTESIAN_POINT('',(-2.724938966801,1.7,0.3));+#14316 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#14317 = DIRECTION('',(0.984807753012,-1.126854202784E-17,+ -0.173648177667));+#14318 = DEFINITIONAL_REPRESENTATION('',(#14319),#14323);+#14319 = LINE('',#14320,#14321);+#14320 = CARTESIAN_POINT('',(6.28318530718,-0.41));+#14321 = VECTOR('',#14322,1.);+#14322 = DIRECTION('',(-1.,0.));+#14323 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14324 = ORIENTED_EDGE('',*,*,#14325,.T.);+#14325 = EDGE_CURVE('',#14297,#14326,#14328,.T.);+#14326 = VERTEX_POINT('',#14327);+#14327 = CARTESIAN_POINT('',(-3.,2.11,-1.665334536938E-16));+#14328 = SURFACE_CURVE('',#14329,(#14333,#14340),.PCURVE_S1.);+#14329 = LINE('',#14330,#14331);+#14330 = CARTESIAN_POINT('',(-2.724938966801,2.11,-1.665334536938E-16));+#14331 = VECTOR('',#14332,1.);+#14332 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#14333 = PCURVE('',#2138,#14334);+#14334 = DEFINITIONAL_REPRESENTATION('',(#14335),#14339);+#14335 = LINE('',#14336,#14337);+#14336 = CARTESIAN_POINT('',(-0.548953137803,-0.299329353611));+#14337 = VECTOR('',#14338,1.);+#14338 = DIRECTION('',(0.,-1.));+#14339 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14340 = PCURVE('',#14341,#14346);+#14341 = PLANE('',#14342);+#14342 = AXIS2_PLACEMENT_3D('',#14343,#14344,#14345);+#14343 = CARTESIAN_POINT('',(-2.724938966801,1.7,-1.665334536938E-16));+#14344 = DIRECTION('',(0.,0.,1.));+#14345 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#14346 = DEFINITIONAL_REPRESENTATION('',(#14347),#14351);+#14347 = LINE('',#14348,#14349);+#14348 = CARTESIAN_POINT('',(4.69137475541E-18,-0.41));+#14349 = VECTOR('',#14350,1.);+#14350 = DIRECTION('',(1.,0.));+#14351 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14352 = ORIENTED_EDGE('',*,*,#14353,.T.);+#14353 = EDGE_CURVE('',#14326,#14354,#14356,.T.);+#14354 = VERTEX_POINT('',#14355);+#14355 = CARTESIAN_POINT('',(-3.,2.11,0.2));+#14356 = SURFACE_CURVE('',#14357,(#14361,#14368),.PCURVE_S1.);+#14357 = LINE('',#14358,#14359);+#14358 = CARTESIAN_POINT('',(-3.,2.11,-1.665334536938E-16));+#14359 = VECTOR('',#14360,1.);+#14360 = DIRECTION('',(0.,0.,1.));+#14361 = PCURVE('',#2138,#14362);+#14362 = DEFINITIONAL_REPRESENTATION('',(#14363),#14367);+#14363 = LINE('',#14364,#14365);+#14364 = CARTESIAN_POINT('',(-0.548953137803,-0.57439038681));+#14365 = VECTOR('',#14366,1.);+#14366 = DIRECTION('',(1.,0.));+#14367 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14368 = PCURVE('',#14369,#14374);+#14369 = PLANE('',#14370);+#14370 = AXIS2_PLACEMENT_3D('',#14371,#14372,#14373);+#14371 = CARTESIAN_POINT('',(-3.,1.7,-1.665334536938E-16));+#14372 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#14373 = DIRECTION('',(0.,0.,1.));+#14374 = DEFINITIONAL_REPRESENTATION('',(#14375),#14379);+#14375 = LINE('',#14376,#14377);+#14376 = CARTESIAN_POINT('',(0.,-0.41));+#14377 = VECTOR('',#14378,1.);+#14378 = DIRECTION('',(1.,0.));+#14379 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14380 = ORIENTED_EDGE('',*,*,#14381,.T.);+#14381 = EDGE_CURVE('',#14354,#14382,#14384,.T.);+#14382 = VERTEX_POINT('',#14383);+#14383 = CARTESIAN_POINT('',(-2.724938966801,2.11,0.2));+#14384 = SURFACE_CURVE('',#14385,(#14389,#14396),.PCURVE_S1.);+#14385 = LINE('',#14386,#14387);+#14386 = CARTESIAN_POINT('',(-3.,2.11,0.2));+#14387 = VECTOR('',#14388,1.);+#14388 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#14389 = PCURVE('',#2138,#14390);+#14390 = DEFINITIONAL_REPRESENTATION('',(#14391),#14395);+#14391 = LINE('',#14392,#14393);+#14392 = CARTESIAN_POINT('',(-0.348953137803,-0.57439038681));+#14393 = VECTOR('',#14394,1.);+#14394 = DIRECTION('',(0.,1.));+#14395 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14396 = PCURVE('',#14397,#14402);+#14397 = PLANE('',#14398);+#14398 = AXIS2_PLACEMENT_3D('',#14399,#14400,#14401);+#14399 = CARTESIAN_POINT('',(-3.,1.7,0.2));+#14400 = DIRECTION('',(0.,0.,-1.));+#14401 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#14402 = DEFINITIONAL_REPRESENTATION('',(#14403),#14407);+#14403 = LINE('',#14404,#14405);+#14404 = CARTESIAN_POINT('',(-4.69137475541E-18,-0.41));+#14405 = VECTOR('',#14406,1.);+#14406 = DIRECTION('',(1.,0.));+#14407 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14408 = ORIENTED_EDGE('',*,*,#14409,.T.);+#14409 = EDGE_CURVE('',#14382,#14410,#14412,.T.);+#14410 = VERTEX_POINT('',#14411);+#14411 = CARTESIAN_POINT('',(-2.6264581915,2.11,0.282635182233));+#14412 = SURFACE_CURVE('',#14413,(#14418,#14429),.PCURVE_S1.);+#14413 = CIRCLE('',#14414,0.1);+#14414 = AXIS2_PLACEMENT_3D('',#14415,#14416,#14417);+#14415 = CARTESIAN_POINT('',(-2.724938966801,2.11,0.3));+#14416 = DIRECTION('',(-1.144237745222E-17,-1.,-0.));+#14417 = DIRECTION('',(0.,0.,-1.));+#14418 = PCURVE('',#2138,#14419);+#14419 = DEFINITIONAL_REPRESENTATION('',(#14420),#14428);+#14420 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#14421,#14422,#14423,#14424+ ,#14425,#14426,#14427),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#14421 = CARTESIAN_POINT('',(-0.348953137803,-0.299329353611));+#14422 = CARTESIAN_POINT('',(-0.348953137803,-0.126124272854));+#14423 = CARTESIAN_POINT('',(-0.198953137803,-0.212726813233));+#14424 = CARTESIAN_POINT('',(-4.8953137803E-02,-0.299329353611));+#14425 = CARTESIAN_POINT('',(-0.198953137803,-0.385931893989));+#14426 = CARTESIAN_POINT('',(-0.348953137803,-0.472534434368));+#14427 = CARTESIAN_POINT('',(-0.348953137803,-0.299329353611));+#14428 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14429 = PCURVE('',#14430,#14435);+#14430 = CYLINDRICAL_SURFACE('',#14431,0.1);+#14431 = AXIS2_PLACEMENT_3D('',#14432,#14433,#14434);+#14432 = CARTESIAN_POINT('',(-2.724938966801,1.7,0.3));+#14433 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#14434 = DIRECTION('',(-0.,0.,-1.));+#14435 = DEFINITIONAL_REPRESENTATION('',(#14436),#14440);+#14436 = LINE('',#14437,#14438);+#14437 = CARTESIAN_POINT('',(0.,-0.41));+#14438 = VECTOR('',#14439,1.);+#14439 = DIRECTION('',(1.,0.));+#14440 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14441 = ORIENTED_EDGE('',*,*,#14442,.T.);+#14442 = EDGE_CURVE('',#14410,#14443,#14445,.T.);+#14443 = VERTEX_POINT('',#14444);+#14444 = CARTESIAN_POINT('',(-2.545442325904,2.11,0.7770944533));+#14445 = SURFACE_CURVE('',#14446,(#14450,#14457),.PCURVE_S1.);+#14446 = LINE('',#14447,#14448);+#14447 = CARTESIAN_POINT('',(-2.6264581915,2.11,0.282635182233));+#14448 = VECTOR('',#14449,1.);+#14449 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087)+ );+#14450 = PCURVE('',#2138,#14451);+#14451 = DEFINITIONAL_REPRESENTATION('',(#14452),#14456);+#14452 = LINE('',#14453,#14454);+#14453 = CARTESIAN_POINT('',(-0.26631795557,-0.20084857831));+#14454 = VECTOR('',#14455,1.);+#14455 = DIRECTION('',(0.986841372087,0.161691392282));+#14456 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14457 = PCURVE('',#14458,#14463);+#14458 = PLANE('',#14459);+#14459 = AXIS2_PLACEMENT_3D('',#14460,#14461,#14462);+#14460 = CARTESIAN_POINT('',(-2.6264581915,1.7,0.282635182233));+#14461 = DIRECTION('',(0.986841372087,-1.129181146488E-17,+ -0.161691392282));+#14462 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087)+ );+#14463 = DEFINITIONAL_REPRESENTATION('',(#14464),#14468);+#14464 = LINE('',#14465,#14466);+#14465 = CARTESIAN_POINT('',(-7.585549159209E-19,-0.41));+#14466 = VECTOR('',#14467,1.);+#14467 = DIRECTION('',(1.,-5.984962792299E-34));+#14468 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14469 = ORIENTED_EDGE('',*,*,#14470,.T.);+#14470 = EDGE_CURVE('',#14443,#2095,#14471,.T.);+#14471 = SURFACE_CURVE('',#14472,(#14477,#14484),.PCURVE_S1.);+#14472 = CIRCLE('',#14473,0.3);+#14473 = AXIS2_PLACEMENT_3D('',#14474,#14475,#14476);+#14474 = CARTESIAN_POINT('',(-2.25,2.11,0.725));+#14475 = DIRECTION('',(1.144237745222E-17,1.,7.703719777549E-34));+#14476 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667+ ));+#14477 = PCURVE('',#2138,#14478);+#14478 = DEFINITIONAL_REPRESENTATION('',(#14479),#14483);+#14479 = CIRCLE('',#14480,0.3);+#14480 = AXIS2_PLACEMENT_2D('',#14481,#14482);+#14481 = CARTESIAN_POINT('',(0.176046862197,0.17560961319));+#14482 = DIRECTION('',(0.173648177667,-0.984807753012));+#14483 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14484 = PCURVE('',#2110,#14485);+#14485 = DEFINITIONAL_REPRESENTATION('',(#14486),#14490);+#14486 = LINE('',#14487,#14488);+#14487 = CARTESIAN_POINT('',(6.28318530718,-0.41));+#14488 = VECTOR('',#14489,1.);+#14489 = DIRECTION('',(-1.,0.));+#14490 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14491 = ORIENTED_EDGE('',*,*,#2122,.T.);+#14492 = ADVANCED_FACE('',(#14493),#14458,.F.);+#14493 = FACE_BOUND('',#14494,.F.);+#14494 = EDGE_LOOP('',(#14495,#14518,#14519,#14542));+#14495 = ORIENTED_EDGE('',*,*,#14496,.T.);+#14496 = EDGE_CURVE('',#14497,#14410,#14499,.T.);+#14497 = VERTEX_POINT('',#14498);+#14498 = CARTESIAN_POINT('',(-2.6264581915,1.7,0.282635182233));+#14499 = SURFACE_CURVE('',#14500,(#14504,#14511),.PCURVE_S1.);+#14500 = LINE('',#14501,#14502);+#14501 = CARTESIAN_POINT('',(-2.6264581915,1.7,0.282635182233));+#14502 = VECTOR('',#14503,1.);+#14503 = DIRECTION('',(1.144237745222E-17,1.,0.));+#14504 = PCURVE('',#14458,#14505);+#14505 = DEFINITIONAL_REPRESENTATION('',(#14506),#14510);+#14506 = LINE('',#14507,#14508);+#14507 = CARTESIAN_POINT('',(0.,-0.));+#14508 = VECTOR('',#14509,1.);+#14509 = DIRECTION('',(-5.385465771581E-30,-1.));+#14510 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14511 = PCURVE('',#14430,#14512);+#14512 = DEFINITIONAL_REPRESENTATION('',(#14513),#14517);+#14513 = LINE('',#14514,#14515);+#14514 = CARTESIAN_POINT('',(1.396263401592,0.));+#14515 = VECTOR('',#14516,1.);+#14516 = DIRECTION('',(0.,-1.));+#14517 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14518 = ORIENTED_EDGE('',*,*,#14442,.T.);+#14519 = ORIENTED_EDGE('',*,*,#14520,.F.);+#14520 = EDGE_CURVE('',#14521,#14443,#14523,.T.);+#14521 = VERTEX_POINT('',#14522);+#14522 = CARTESIAN_POINT('',(-2.545442325904,1.7,0.7770944533));+#14523 = SURFACE_CURVE('',#14524,(#14528,#14535),.PCURVE_S1.);+#14524 = LINE('',#14525,#14526);+#14525 = CARTESIAN_POINT('',(-2.545442325904,1.7,0.7770944533));+#14526 = VECTOR('',#14527,1.);+#14527 = DIRECTION('',(1.144237745222E-17,1.,0.));+#14528 = PCURVE('',#14458,#14529);+#14529 = DEFINITIONAL_REPRESENTATION('',(#14530),#14534);+#14530 = LINE('',#14531,#14532);+#14531 = CARTESIAN_POINT('',(0.501052433606,-9.270141137704E-19));+#14532 = VECTOR('',#14533,1.);+#14533 = DIRECTION('',(-5.385465771581E-30,-1.));+#14534 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14535 = PCURVE('',#2110,#14536);+#14536 = DEFINITIONAL_REPRESENTATION('',(#14537),#14541);+#14537 = LINE('',#14538,#14539);+#14538 = CARTESIAN_POINT('',(6.28318530718,0.));+#14539 = VECTOR('',#14540,1.);+#14540 = DIRECTION('',(0.,-1.));+#14541 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14542 = ORIENTED_EDGE('',*,*,#14543,.F.);+#14543 = EDGE_CURVE('',#14497,#14521,#14544,.T.);+#14544 = SURFACE_CURVE('',#14545,(#14549,#14556),.PCURVE_S1.);+#14545 = LINE('',#14546,#14547);+#14546 = CARTESIAN_POINT('',(-2.6264581915,1.7,0.282635182233));+#14547 = VECTOR('',#14548,1.);+#14548 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087)+ );+#14549 = PCURVE('',#14458,#14550);+#14550 = DEFINITIONAL_REPRESENTATION('',(#14551),#14555);+#14551 = LINE('',#14552,#14553);+#14552 = CARTESIAN_POINT('',(0.,-0.));+#14553 = VECTOR('',#14554,1.);+#14554 = DIRECTION('',(1.,-5.984962792299E-34));+#14555 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14556 = PCURVE('',#2082,#14557);+#14557 = DEFINITIONAL_REPRESENTATION('',(#14558),#14562);+#14558 = LINE('',#14559,#14560);+#14559 = CARTESIAN_POINT('',(-0.26631795557,-0.20084857831));+#14560 = VECTOR('',#14561,1.);+#14561 = DIRECTION('',(0.986841372087,0.161691392282));+#14562 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14563 = ADVANCED_FACE('',(#14564),#14430,.F.);+#14564 = FACE_BOUND('',#14565,.F.);+#14565 = EDGE_LOOP('',(#14566,#14589,#14590,#14591));+#14566 = ORIENTED_EDGE('',*,*,#14567,.T.);+#14567 = EDGE_CURVE('',#14568,#14382,#14570,.T.);+#14568 = VERTEX_POINT('',#14569);+#14569 = CARTESIAN_POINT('',(-2.724938966801,1.7,0.2));+#14570 = SURFACE_CURVE('',#14571,(#14575,#14582),.PCURVE_S1.);+#14571 = LINE('',#14572,#14573);+#14572 = CARTESIAN_POINT('',(-2.724938966801,1.7,0.2));+#14573 = VECTOR('',#14574,1.);+#14574 = DIRECTION('',(1.144237745222E-17,1.,0.));+#14575 = PCURVE('',#14430,#14576);+#14576 = DEFINITIONAL_REPRESENTATION('',(#14577),#14581);+#14577 = LINE('',#14578,#14579);+#14578 = CARTESIAN_POINT('',(0.,0.));+#14579 = VECTOR('',#14580,1.);+#14580 = DIRECTION('',(0.,-1.));+#14581 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14582 = PCURVE('',#14397,#14583);+#14583 = DEFINITIONAL_REPRESENTATION('',(#14584),#14588);+#14584 = LINE('',#14585,#14586);+#14585 = CARTESIAN_POINT('',(0.275061033199,-3.147352164261E-18));+#14586 = VECTOR('',#14587,1.);+#14587 = DIRECTION('',(0.,-1.));+#14588 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14589 = ORIENTED_EDGE('',*,*,#14409,.T.);+#14590 = ORIENTED_EDGE('',*,*,#14496,.F.);+#14591 = ORIENTED_EDGE('',*,*,#14592,.F.);+#14592 = EDGE_CURVE('',#14568,#14497,#14593,.T.);+#14593 = SURFACE_CURVE('',#14594,(#14599,#14606),.PCURVE_S1.);+#14594 = CIRCLE('',#14595,0.1);+#14595 = AXIS2_PLACEMENT_3D('',#14596,#14597,#14598);+#14596 = CARTESIAN_POINT('',(-2.724938966801,1.7,0.3));+#14597 = DIRECTION('',(-1.144237745222E-17,-1.,-0.));+#14598 = DIRECTION('',(0.,0.,-1.));+#14599 = PCURVE('',#14430,#14600);+#14600 = DEFINITIONAL_REPRESENTATION('',(#14601),#14605);+#14601 = LINE('',#14602,#14603);+#14602 = CARTESIAN_POINT('',(0.,0.));+#14603 = VECTOR('',#14604,1.);+#14604 = DIRECTION('',(1.,0.));+#14605 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14606 = PCURVE('',#2082,#14607);+#14607 = DEFINITIONAL_REPRESENTATION('',(#14608),#14616);+#14608 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#14609,#14610,#14611,#14612+ ,#14613,#14614,#14615),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#14609 = CARTESIAN_POINT('',(-0.348953137803,-0.299329353611));+#14610 = CARTESIAN_POINT('',(-0.348953137803,-0.126124272854));+#14611 = CARTESIAN_POINT('',(-0.198953137803,-0.212726813233));+#14612 = CARTESIAN_POINT('',(-4.8953137803E-02,-0.299329353611));+#14613 = CARTESIAN_POINT('',(-0.198953137803,-0.385931893989));+#14614 = CARTESIAN_POINT('',(-0.348953137803,-0.472534434368));+#14615 = CARTESIAN_POINT('',(-0.348953137803,-0.299329353611));+#14616 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14617 = ADVANCED_FACE('',(#14618),#14397,.F.);+#14618 = FACE_BOUND('',#14619,.F.);+#14619 = EDGE_LOOP('',(#14620,#14643,#14644,#14645));+#14620 = ORIENTED_EDGE('',*,*,#14621,.T.);+#14621 = EDGE_CURVE('',#14622,#14354,#14624,.T.);+#14622 = VERTEX_POINT('',#14623);+#14623 = CARTESIAN_POINT('',(-3.,1.7,0.2));+#14624 = SURFACE_CURVE('',#14625,(#14629,#14636),.PCURVE_S1.);+#14625 = LINE('',#14626,#14627);+#14626 = CARTESIAN_POINT('',(-3.,1.7,0.2));+#14627 = VECTOR('',#14628,1.);+#14628 = DIRECTION('',(1.144237745222E-17,1.,0.));+#14629 = PCURVE('',#14397,#14630);+#14630 = DEFINITIONAL_REPRESENTATION('',(#14631),#14635);+#14631 = LINE('',#14632,#14633);+#14632 = CARTESIAN_POINT('',(0.,-0.));+#14633 = VECTOR('',#14634,1.);+#14634 = DIRECTION('',(0.,-1.));+#14635 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14636 = PCURVE('',#14369,#14637);+#14637 = DEFINITIONAL_REPRESENTATION('',(#14638),#14642);+#14638 = LINE('',#14639,#14640);+#14639 = CARTESIAN_POINT('',(0.2,0.));+#14640 = VECTOR('',#14641,1.);+#14641 = DIRECTION('',(0.,-1.));+#14642 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14643 = ORIENTED_EDGE('',*,*,#14381,.T.);+#14644 = ORIENTED_EDGE('',*,*,#14567,.F.);+#14645 = ORIENTED_EDGE('',*,*,#14646,.F.);+#14646 = EDGE_CURVE('',#14622,#14568,#14647,.T.);+#14647 = SURFACE_CURVE('',#14648,(#14652,#14659),.PCURVE_S1.);+#14648 = LINE('',#14649,#14650);+#14649 = CARTESIAN_POINT('',(-3.,1.7,0.2));+#14650 = VECTOR('',#14651,1.);+#14651 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#14652 = PCURVE('',#14397,#14653);+#14653 = DEFINITIONAL_REPRESENTATION('',(#14654),#14658);+#14654 = LINE('',#14655,#14656);+#14655 = CARTESIAN_POINT('',(0.,-0.));+#14656 = VECTOR('',#14657,1.);+#14657 = DIRECTION('',(1.,0.));+#14658 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14659 = PCURVE('',#2082,#14660);+#14660 = DEFINITIONAL_REPRESENTATION('',(#14661),#14665);+#14661 = LINE('',#14662,#14663);+#14662 = CARTESIAN_POINT('',(-0.348953137803,-0.57439038681));+#14663 = VECTOR('',#14664,1.);+#14664 = DIRECTION('',(0.,1.));+#14665 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14666 = ADVANCED_FACE('',(#14667),#14369,.F.);+#14667 = FACE_BOUND('',#14668,.F.);+#14668 = EDGE_LOOP('',(#14669,#14692,#14693,#14694));+#14669 = ORIENTED_EDGE('',*,*,#14670,.T.);+#14670 = EDGE_CURVE('',#14671,#14326,#14673,.T.);+#14671 = VERTEX_POINT('',#14672);+#14672 = CARTESIAN_POINT('',(-3.,1.7,-1.665334536938E-16));+#14673 = SURFACE_CURVE('',#14674,(#14678,#14685),.PCURVE_S1.);+#14674 = LINE('',#14675,#14676);+#14675 = CARTESIAN_POINT('',(-3.,1.7,-1.665334536938E-16));+#14676 = VECTOR('',#14677,1.);+#14677 = DIRECTION('',(1.144237745222E-17,1.,0.));+#14678 = PCURVE('',#14369,#14679);+#14679 = DEFINITIONAL_REPRESENTATION('',(#14680),#14684);+#14680 = LINE('',#14681,#14682);+#14681 = CARTESIAN_POINT('',(0.,0.));+#14682 = VECTOR('',#14683,1.);+#14683 = DIRECTION('',(0.,-1.));+#14684 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14685 = PCURVE('',#14341,#14686);+#14686 = DEFINITIONAL_REPRESENTATION('',(#14687),#14691);+#14687 = LINE('',#14688,#14689);+#14688 = CARTESIAN_POINT('',(0.275061033199,3.147352164261E-18));+#14689 = VECTOR('',#14690,1.);+#14690 = DIRECTION('',(0.,-1.));+#14691 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14692 = ORIENTED_EDGE('',*,*,#14353,.T.);+#14693 = ORIENTED_EDGE('',*,*,#14621,.F.);+#14694 = ORIENTED_EDGE('',*,*,#14695,.F.);+#14695 = EDGE_CURVE('',#14671,#14622,#14696,.T.);+#14696 = SURFACE_CURVE('',#14697,(#14701,#14708),.PCURVE_S1.);+#14697 = LINE('',#14698,#14699);+#14698 = CARTESIAN_POINT('',(-3.,1.7,-1.665334536938E-16));+#14699 = VECTOR('',#14700,1.);+#14700 = DIRECTION('',(0.,0.,1.));+#14701 = PCURVE('',#14369,#14702);+#14702 = DEFINITIONAL_REPRESENTATION('',(#14703),#14707);+#14703 = LINE('',#14704,#14705);+#14704 = CARTESIAN_POINT('',(0.,0.));+#14705 = VECTOR('',#14706,1.);+#14706 = DIRECTION('',(1.,0.));+#14707 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14708 = PCURVE('',#2082,#14709);+#14709 = DEFINITIONAL_REPRESENTATION('',(#14710),#14714);+#14710 = LINE('',#14711,#14712);+#14711 = CARTESIAN_POINT('',(-0.548953137803,-0.57439038681));+#14712 = VECTOR('',#14713,1.);+#14713 = DIRECTION('',(1.,0.));+#14714 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14715 = ADVANCED_FACE('',(#14716),#14341,.F.);+#14716 = FACE_BOUND('',#14717,.F.);+#14717 = EDGE_LOOP('',(#14718,#14741,#14742,#14743));+#14718 = ORIENTED_EDGE('',*,*,#14719,.T.);+#14719 = EDGE_CURVE('',#14720,#14297,#14722,.T.);+#14720 = VERTEX_POINT('',#14721);+#14721 = CARTESIAN_POINT('',(-2.724938966801,1.7,-1.665334536938E-16));+#14722 = SURFACE_CURVE('',#14723,(#14727,#14734),.PCURVE_S1.);+#14723 = LINE('',#14724,#14725);+#14724 = CARTESIAN_POINT('',(-2.724938966801,1.7,-1.665334536938E-16));+#14725 = VECTOR('',#14726,1.);+#14726 = DIRECTION('',(1.144237745222E-17,1.,0.));+#14727 = PCURVE('',#14341,#14728);+#14728 = DEFINITIONAL_REPRESENTATION('',(#14729),#14733);+#14729 = LINE('',#14730,#14731);+#14730 = CARTESIAN_POINT('',(0.,0.));+#14731 = VECTOR('',#14732,1.);+#14732 = DIRECTION('',(0.,-1.));+#14733 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14734 = PCURVE('',#14313,#14735);+#14735 = DEFINITIONAL_REPRESENTATION('',(#14736),#14740);+#14736 = LINE('',#14737,#14738);+#14737 = CARTESIAN_POINT('',(4.886921905584,0.));+#14738 = VECTOR('',#14739,1.);+#14739 = DIRECTION('',(0.,-1.));+#14740 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14741 = ORIENTED_EDGE('',*,*,#14325,.T.);+#14742 = ORIENTED_EDGE('',*,*,#14670,.F.);+#14743 = ORIENTED_EDGE('',*,*,#14744,.F.);+#14744 = EDGE_CURVE('',#14720,#14671,#14745,.T.);+#14745 = SURFACE_CURVE('',#14746,(#14750,#14757),.PCURVE_S1.);+#14746 = LINE('',#14747,#14748);+#14747 = CARTESIAN_POINT('',(-2.724938966801,1.7,-1.665334536938E-16));+#14748 = VECTOR('',#14749,1.);+#14749 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#14750 = PCURVE('',#14341,#14751);+#14751 = DEFINITIONAL_REPRESENTATION('',(#14752),#14756);+#14752 = LINE('',#14753,#14754);+#14753 = CARTESIAN_POINT('',(0.,0.));+#14754 = VECTOR('',#14755,1.);+#14755 = DIRECTION('',(1.,0.));+#14756 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14757 = PCURVE('',#2082,#14758);+#14758 = DEFINITIONAL_REPRESENTATION('',(#14759),#14763);+#14759 = LINE('',#14760,#14761);+#14760 = CARTESIAN_POINT('',(-0.548953137803,-0.299329353611));+#14761 = VECTOR('',#14762,1.);+#14762 = DIRECTION('',(0.,-1.));+#14763 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14764 = ADVANCED_FACE('',(#14765),#14313,.T.);+#14765 = FACE_BOUND('',#14766,.T.);+#14766 = EDGE_LOOP('',(#14767,#14791,#14792,#14793));+#14767 = ORIENTED_EDGE('',*,*,#14768,.T.);+#14768 = EDGE_CURVE('',#14769,#14720,#14771,.T.);+#14769 = VERTEX_POINT('',#14770);+#14770 = CARTESIAN_POINT('',(-2.429496640897,1.7,0.2479055467));+#14771 = SURFACE_CURVE('',#14772,(#14777,#14784),.PCURVE_S1.);+#14772 = CIRCLE('',#14773,0.3);+#14773 = AXIS2_PLACEMENT_3D('',#14774,#14775,#14776);+#14774 = CARTESIAN_POINT('',(-2.724938966801,1.7,0.3));+#14775 = DIRECTION('',(1.144237745222E-17,1.,7.703719777549E-34));+#14776 = DIRECTION('',(0.984807753012,-1.126854202784E-17,+ -0.173648177667));+#14777 = PCURVE('',#14313,#14778);+#14778 = DEFINITIONAL_REPRESENTATION('',(#14779),#14783);+#14779 = LINE('',#14780,#14781);+#14780 = CARTESIAN_POINT('',(6.28318530718,0.));+#14781 = VECTOR('',#14782,1.);+#14782 = DIRECTION('',(-1.,0.));+#14783 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14784 = PCURVE('',#2082,#14785);+#14785 = DEFINITIONAL_REPRESENTATION('',(#14786),#14790);+#14786 = CIRCLE('',#14787,0.3);+#14787 = AXIS2_PLACEMENT_2D('',#14788,#14789);+#14788 = CARTESIAN_POINT('',(-0.248953137803,-0.299329353611));+#14789 = DIRECTION('',(-0.173648177667,0.984807753012));+#14790 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14791 = ORIENTED_EDGE('',*,*,#14719,.T.);+#14792 = ORIENTED_EDGE('',*,*,#14296,.F.);+#14793 = ORIENTED_EDGE('',*,*,#14794,.F.);+#14794 = EDGE_CURVE('',#14769,#14269,#14795,.T.);+#14795 = SURFACE_CURVE('',#14796,(#14800,#14807),.PCURVE_S1.);+#14796 = LINE('',#14797,#14798);+#14797 = CARTESIAN_POINT('',(-2.429496640897,1.7,0.2479055467));+#14798 = VECTOR('',#14799,1.);+#14799 = DIRECTION('',(1.144237745222E-17,1.,0.));+#14800 = PCURVE('',#14313,#14801);+#14801 = DEFINITIONAL_REPRESENTATION('',(#14802),#14806);+#14802 = LINE('',#14803,#14804);+#14803 = CARTESIAN_POINT('',(6.28318530718,0.));+#14804 = VECTOR('',#14805,1.);+#14805 = DIRECTION('',(0.,-1.));+#14806 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14807 = PCURVE('',#14284,#14808);+#14808 = DEFINITIONAL_REPRESENTATION('',(#14809),#14813);+#14809 = LINE('',#14810,#14811);+#14810 = CARTESIAN_POINT('',(0.501052433606,9.270141137704E-19));+#14811 = VECTOR('',#14812,1.);+#14812 = DIRECTION('',(5.385465771581E-30,-1.));+#14813 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14814 = ADVANCED_FACE('',(#14815),#14284,.F.);+#14815 = FACE_BOUND('',#14816,.F.);+#14816 = EDGE_LOOP('',(#14817,#14840,#14841,#14842));+#14817 = ORIENTED_EDGE('',*,*,#14818,.T.);+#14818 = EDGE_CURVE('',#14819,#14236,#14821,.T.);+#14819 = VERTEX_POINT('',#14820);+#14820 = CARTESIAN_POINT('',(-2.348480775301,1.7,0.742364817767));+#14821 = SURFACE_CURVE('',#14822,(#14826,#14833),.PCURVE_S1.);+#14822 = LINE('',#14823,#14824);+#14823 = CARTESIAN_POINT('',(-2.348480775301,1.7,0.742364817767));+#14824 = VECTOR('',#14825,1.);+#14825 = DIRECTION('',(1.144237745222E-17,1.,0.));+#14826 = PCURVE('',#14284,#14827);+#14827 = DEFINITIONAL_REPRESENTATION('',(#14828),#14832);+#14828 = LINE('',#14829,#14830);+#14829 = CARTESIAN_POINT('',(0.,-0.));+#14830 = VECTOR('',#14831,1.);+#14831 = DIRECTION('',(5.385465771581E-30,-1.));+#14832 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14833 = PCURVE('',#14256,#14834);+#14834 = DEFINITIONAL_REPRESENTATION('',(#14835),#14839);+#14835 = LINE('',#14836,#14837);+#14836 = CARTESIAN_POINT('',(1.396263401592,0.));+#14837 = VECTOR('',#14838,1.);+#14838 = DIRECTION('',(0.,-1.));+#14839 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14840 = ORIENTED_EDGE('',*,*,#14268,.T.);+#14841 = ORIENTED_EDGE('',*,*,#14794,.F.);+#14842 = ORIENTED_EDGE('',*,*,#14843,.F.);+#14843 = EDGE_CURVE('',#14819,#14769,#14844,.T.);+#14844 = SURFACE_CURVE('',#14845,(#14849,#14856),.PCURVE_S1.);+#14845 = LINE('',#14846,#14847);+#14846 = CARTESIAN_POINT('',(-2.348480775301,1.7,0.742364817767));+#14847 = VECTOR('',#14848,1.);+#14848 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087+ ));+#14849 = PCURVE('',#14284,#14850);+#14850 = DEFINITIONAL_REPRESENTATION('',(#14851),#14855);+#14851 = LINE('',#14852,#14853);+#14852 = CARTESIAN_POINT('',(0.,-0.));+#14853 = VECTOR('',#14854,1.);+#14854 = DIRECTION('',(1.,5.984962792299E-34));+#14855 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14856 = PCURVE('',#2082,#14857);+#14857 = DEFINITIONAL_REPRESENTATION('',(#14858),#14862);+#14858 = LINE('',#14859,#14860);+#14859 = CARTESIAN_POINT('',(0.193411679964,7.7128837889E-02));+#14860 = VECTOR('',#14861,1.);+#14861 = DIRECTION('',(-0.986841372087,-0.161691392282));+#14862 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14863 = ADVANCED_FACE('',(#14864),#14256,.F.);+#14864 = FACE_BOUND('',#14865,.F.);+#14865 = EDGE_LOOP('',(#14866,#14889,#14890,#14891));+#14866 = ORIENTED_EDGE('',*,*,#14867,.T.);+#14867 = EDGE_CURVE('',#14868,#14213,#14870,.T.);+#14868 = VERTEX_POINT('',#14869);+#14869 = CARTESIAN_POINT('',(-2.25,1.7,0.825));+#14870 = SURFACE_CURVE('',#14871,(#14875,#14882),.PCURVE_S1.);+#14871 = LINE('',#14872,#14873);+#14872 = CARTESIAN_POINT('',(-2.25,1.7,0.825));+#14873 = VECTOR('',#14874,1.);+#14874 = DIRECTION('',(1.144237745222E-17,1.,0.));+#14875 = PCURVE('',#14256,#14876);+#14876 = DEFINITIONAL_REPRESENTATION('',(#14877),#14881);+#14877 = LINE('',#14878,#14879);+#14878 = CARTESIAN_POINT('',(0.,0.));+#14879 = VECTOR('',#14880,1.);+#14880 = DIRECTION('',(0.,-1.));+#14881 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14882 = PCURVE('',#306,#14883);+#14883 = DEFINITIONAL_REPRESENTATION('',(#14884),#14888);+#14884 = LINE('',#14885,#14886);+#14885 = CARTESIAN_POINT('',(0.45,5.149069853499E-18));+#14886 = VECTOR('',#14887,1.);+#14887 = DIRECTION('',(0.,-1.));+#14888 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14889 = ORIENTED_EDGE('',*,*,#14235,.T.);+#14890 = ORIENTED_EDGE('',*,*,#14818,.F.);+#14891 = ORIENTED_EDGE('',*,*,#14892,.F.);+#14892 = EDGE_CURVE('',#14868,#14819,#14893,.T.);+#14893 = SURFACE_CURVE('',#14894,(#14899,#14906),.PCURVE_S1.);+#14894 = CIRCLE('',#14895,0.1);+#14895 = AXIS2_PLACEMENT_3D('',#14896,#14897,#14898);+#14896 = CARTESIAN_POINT('',(-2.25,1.7,0.725));+#14897 = DIRECTION('',(-1.144237745222E-17,-1.,3.284293275761E-47));+#14898 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.));+#14899 = PCURVE('',#14256,#14900);+#14900 = DEFINITIONAL_REPRESENTATION('',(#14901),#14905);+#14901 = LINE('',#14902,#14903);+#14902 = CARTESIAN_POINT('',(0.,0.));+#14903 = VECTOR('',#14904,1.);+#14904 = DIRECTION('',(1.,0.));+#14905 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14906 = PCURVE('',#2082,#14907);+#14907 = DEFINITIONAL_REPRESENTATION('',(#14908),#14916);+#14908 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#14909,#14910,#14911,#14912+ ,#14913,#14914,#14915),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#14909 = CARTESIAN_POINT('',(0.276046862197,0.17560961319));+#14910 = CARTESIAN_POINT('',(0.276046862197,2.404532433112E-03));+#14911 = CARTESIAN_POINT('',(0.126046862197,8.900707281156E-02));+#14912 = CARTESIAN_POINT('',(-2.3953137803E-02,0.17560961319));+#14913 = CARTESIAN_POINT('',(0.126046862197,0.262212153568));+#14914 = CARTESIAN_POINT('',(0.276046862197,0.348814693947));+#14915 = CARTESIAN_POINT('',(0.276046862197,0.17560961319));+#14916 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14917 = ADVANCED_FACE('',(#14918),#2110,.T.);+#14918 = FACE_BOUND('',#14919,.T.);+#14919 = EDGE_LOOP('',(#14920,#14942,#14943,#14944));+#14920 = ORIENTED_EDGE('',*,*,#14921,.T.);+#14921 = EDGE_CURVE('',#14521,#2067,#14922,.T.);+#14922 = SURFACE_CURVE('',#14923,(#14928,#14935),.PCURVE_S1.);+#14923 = CIRCLE('',#14924,0.3);+#14924 = AXIS2_PLACEMENT_3D('',#14925,#14926,#14927);+#14925 = CARTESIAN_POINT('',(-2.25,1.7,0.725));+#14926 = DIRECTION('',(1.144237745222E-17,1.,7.703719777549E-34));+#14927 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667+ ));+#14928 = PCURVE('',#2110,#14929);+#14929 = DEFINITIONAL_REPRESENTATION('',(#14930),#14934);+#14930 = LINE('',#14931,#14932);+#14931 = CARTESIAN_POINT('',(6.28318530718,0.));+#14932 = VECTOR('',#14933,1.);+#14933 = DIRECTION('',(-1.,0.));+#14934 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14935 = PCURVE('',#2082,#14936);+#14936 = DEFINITIONAL_REPRESENTATION('',(#14937),#14941);+#14937 = CIRCLE('',#14938,0.3);+#14938 = AXIS2_PLACEMENT_2D('',#14939,#14940);+#14939 = CARTESIAN_POINT('',(0.176046862197,0.17560961319));+#14940 = DIRECTION('',(0.173648177667,-0.984807753012));+#14941 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14942 = ORIENTED_EDGE('',*,*,#2094,.T.);+#14943 = ORIENTED_EDGE('',*,*,#14470,.F.);+#14944 = ORIENTED_EDGE('',*,*,#14520,.F.);+#14945 = ADVANCED_FACE('',(#14946),#2082,.F.);+#14946 = FACE_BOUND('',#14947,.F.);+#14947 = EDGE_LOOP('',(#14948,#14969,#14990,#14991,#14992,#14993,#14994,+ #14995,#14996,#14997,#14998,#14999));+#14948 = ORIENTED_EDGE('',*,*,#14949,.F.);+#14949 = EDGE_CURVE('',#291,#2044,#14950,.T.);+#14950 = SURFACE_CURVE('',#14951,(#14955,#14962),.PCURVE_S1.);+#14951 = LINE('',#14952,#14953);+#14952 = CARTESIAN_POINT('',(-1.95,1.7,0.786976568901));+#14953 = VECTOR('',#14954,1.);+#14954 = DIRECTION('',(0.,0.,1.));+#14955 = PCURVE('',#2082,#14956);+#14956 = DEFINITIONAL_REPRESENTATION('',(#14957),#14961);+#14957 = LINE('',#14958,#14959);+#14958 = CARTESIAN_POINT('',(0.238023431098,0.47560961319));+#14959 = VECTOR('',#14960,1.);+#14960 = DIRECTION('',(1.,0.));+#14961 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14962 = PCURVE('',#334,#14963);+#14963 = DEFINITIONAL_REPRESENTATION('',(#14964),#14968);+#14964 = LINE('',#14965,#14966);+#14965 = CARTESIAN_POINT('',(3.975,-0.238023431099));+#14966 = VECTOR('',#14967,1.);+#14967 = DIRECTION('',(0.,1.));+#14968 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14969 = ORIENTED_EDGE('',*,*,#14970,.T.);+#14970 = EDGE_CURVE('',#291,#14868,#14971,.T.);+#14971 = SURFACE_CURVE('',#14972,(#14976,#14983),.PCURVE_S1.);+#14972 = LINE('',#14973,#14974);+#14973 = CARTESIAN_POINT('',(-1.8,1.7,0.825));+#14974 = VECTOR('',#14975,1.);+#14975 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#14976 = PCURVE('',#2082,#14977);+#14977 = DEFINITIONAL_REPRESENTATION('',(#14978),#14982);+#14978 = LINE('',#14979,#14980);+#14979 = CARTESIAN_POINT('',(0.276046862197,0.62560961319));+#14980 = VECTOR('',#14981,1.);+#14981 = DIRECTION('',(0.,-1.));+#14982 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14983 = PCURVE('',#306,#14984);+#14984 = DEFINITIONAL_REPRESENTATION('',(#14985),#14989);+#14985 = LINE('',#14986,#14987);+#14986 = CARTESIAN_POINT('',(0.,0.));+#14987 = VECTOR('',#14988,1.);+#14988 = DIRECTION('',(1.,0.));+#14989 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14990 = ORIENTED_EDGE('',*,*,#14892,.T.);+#14991 = ORIENTED_EDGE('',*,*,#14843,.T.);+#14992 = ORIENTED_EDGE('',*,*,#14768,.T.);+#14993 = ORIENTED_EDGE('',*,*,#14744,.T.);+#14994 = ORIENTED_EDGE('',*,*,#14695,.T.);+#14995 = ORIENTED_EDGE('',*,*,#14646,.T.);+#14996 = ORIENTED_EDGE('',*,*,#14592,.T.);+#14997 = ORIENTED_EDGE('',*,*,#14543,.T.);+#14998 = ORIENTED_EDGE('',*,*,#14921,.T.);+#14999 = ORIENTED_EDGE('',*,*,#2066,.T.);+#15000 = ADVANCED_FACE('',(#15001),#2031,.T.);+#15001 = FACE_BOUND('',#15002,.T.);+#15002 = EDGE_LOOP('',(#15003,#15024,#15047,#15080,#15108,#15137,#15165,+ #15193,#15221,#15254,#15282,#15304));+#15003 = ORIENTED_EDGE('',*,*,#15004,.F.);+#15004 = EDGE_CURVE('',#319,#2016,#15005,.T.);+#15005 = SURFACE_CURVE('',#15006,(#15010,#15017),.PCURVE_S1.);+#15006 = LINE('',#15007,#15008);+#15007 = CARTESIAN_POINT('',(-1.95,0.84,0.786976568901));+#15008 = VECTOR('',#15009,1.);+#15009 = DIRECTION('',(0.,0.,1.));+#15010 = PCURVE('',#2031,#15011);+#15011 = DEFINITIONAL_REPRESENTATION('',(#15012),#15016);+#15012 = LINE('',#15013,#15014);+#15013 = CARTESIAN_POINT('',(0.238023431098,0.47560961319));+#15014 = VECTOR('',#15015,1.);+#15015 = DIRECTION('',(1.,0.));+#15016 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15017 = PCURVE('',#334,#15018);+#15018 = DEFINITIONAL_REPRESENTATION('',(#15019),#15023);+#15019 = LINE('',#15020,#15021);+#15020 = CARTESIAN_POINT('',(3.115,-0.238023431099));+#15021 = VECTOR('',#15022,1.);+#15022 = DIRECTION('',(0.,1.));+#15023 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15024 = ORIENTED_EDGE('',*,*,#15025,.T.);+#15025 = EDGE_CURVE('',#319,#15026,#15028,.T.);+#15026 = VERTEX_POINT('',#15027);+#15027 = CARTESIAN_POINT('',(-2.25,0.84,0.825));+#15028 = SURFACE_CURVE('',#15029,(#15033,#15040),.PCURVE_S1.);+#15029 = LINE('',#15030,#15031);+#15030 = CARTESIAN_POINT('',(-1.8,0.84,0.825));+#15031 = VECTOR('',#15032,1.);+#15032 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#15033 = PCURVE('',#2031,#15034);+#15034 = DEFINITIONAL_REPRESENTATION('',(#15035),#15039);+#15035 = LINE('',#15036,#15037);+#15036 = CARTESIAN_POINT('',(0.276046862197,0.62560961319));+#15037 = VECTOR('',#15038,1.);+#15038 = DIRECTION('',(0.,-1.));+#15039 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15040 = PCURVE('',#362,#15041);+#15041 = DEFINITIONAL_REPRESENTATION('',(#15042),#15046);+#15042 = LINE('',#15043,#15044);+#15043 = CARTESIAN_POINT('',(4.69137475541E-18,-0.41));+#15044 = VECTOR('',#15045,1.);+#15045 = DIRECTION('',(1.,0.));+#15046 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15047 = ORIENTED_EDGE('',*,*,#15048,.T.);+#15048 = EDGE_CURVE('',#15026,#15049,#15051,.T.);+#15049 = VERTEX_POINT('',#15050);+#15050 = CARTESIAN_POINT('',(-2.348480775301,0.84,0.742364817767));+#15051 = SURFACE_CURVE('',#15052,(#15057,#15068),.PCURVE_S1.);+#15052 = CIRCLE('',#15053,0.1);+#15053 = AXIS2_PLACEMENT_3D('',#15054,#15055,#15056);+#15054 = CARTESIAN_POINT('',(-2.25,0.84,0.725));+#15055 = DIRECTION('',(-1.144237745222E-17,-1.,3.284293275761E-47));+#15056 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.));+#15057 = PCURVE('',#2031,#15058);+#15058 = DEFINITIONAL_REPRESENTATION('',(#15059),#15067);+#15059 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#15060,#15061,#15062,#15063+ ,#15064,#15065,#15066),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#15060 = CARTESIAN_POINT('',(0.276046862197,0.17560961319));+#15061 = CARTESIAN_POINT('',(0.276046862197,2.404532433112E-03));+#15062 = CARTESIAN_POINT('',(0.126046862197,8.900707281156E-02));+#15063 = CARTESIAN_POINT('',(-2.3953137803E-02,0.17560961319));+#15064 = CARTESIAN_POINT('',(0.126046862197,0.262212153568));+#15065 = CARTESIAN_POINT('',(0.276046862197,0.348814693947));+#15066 = CARTESIAN_POINT('',(0.276046862197,0.17560961319));+#15067 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15068 = PCURVE('',#15069,#15074);+#15069 = CYLINDRICAL_SURFACE('',#15070,0.1);+#15070 = AXIS2_PLACEMENT_3D('',#15071,#15072,#15073);+#15071 = CARTESIAN_POINT('',(-2.25,0.43,0.725));+#15072 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#15073 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.));+#15074 = DEFINITIONAL_REPRESENTATION('',(#15075),#15079);+#15075 = LINE('',#15076,#15077);+#15076 = CARTESIAN_POINT('',(0.,-0.41));+#15077 = VECTOR('',#15078,1.);+#15078 = DIRECTION('',(1.,0.));+#15079 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15080 = ORIENTED_EDGE('',*,*,#15081,.T.);+#15081 = EDGE_CURVE('',#15049,#15082,#15084,.T.);+#15082 = VERTEX_POINT('',#15083);+#15083 = CARTESIAN_POINT('',(-2.429496640897,0.84,0.2479055467));+#15084 = SURFACE_CURVE('',#15085,(#15089,#15096),.PCURVE_S1.);+#15085 = LINE('',#15086,#15087);+#15086 = CARTESIAN_POINT('',(-2.348480775301,0.84,0.742364817767));+#15087 = VECTOR('',#15088,1.);+#15088 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087+ ));+#15089 = PCURVE('',#2031,#15090);+#15090 = DEFINITIONAL_REPRESENTATION('',(#15091),#15095);+#15091 = LINE('',#15092,#15093);+#15092 = CARTESIAN_POINT('',(0.193411679964,7.7128837889E-02));+#15093 = VECTOR('',#15094,1.);+#15094 = DIRECTION('',(-0.986841372087,-0.161691392282));+#15095 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15096 = PCURVE('',#15097,#15102);+#15097 = PLANE('',#15098);+#15098 = AXIS2_PLACEMENT_3D('',#15099,#15100,#15101);+#15099 = CARTESIAN_POINT('',(-2.348480775301,0.43,0.742364817767));+#15100 = DIRECTION('',(-0.986841372087,1.129181146488E-17,0.161691392282+ ));+#15101 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087+ ));+#15102 = DEFINITIONAL_REPRESENTATION('',(#15103),#15107);+#15103 = LINE('',#15104,#15105);+#15104 = CARTESIAN_POINT('',(7.585549159209E-19,-0.41));+#15105 = VECTOR('',#15106,1.);+#15106 = DIRECTION('',(1.,5.984962792299E-34));+#15107 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15108 = ORIENTED_EDGE('',*,*,#15109,.T.);+#15109 = EDGE_CURVE('',#15082,#15110,#15112,.T.);+#15110 = VERTEX_POINT('',#15111);+#15111 = CARTESIAN_POINT('',(-2.724938966801,0.84,-1.665334536938E-16));+#15112 = SURFACE_CURVE('',#15113,(#15118,#15125),.PCURVE_S1.);+#15113 = CIRCLE('',#15114,0.3);+#15114 = AXIS2_PLACEMENT_3D('',#15115,#15116,#15117);+#15115 = CARTESIAN_POINT('',(-2.724938966801,0.84,0.3));+#15116 = DIRECTION('',(1.144237745222E-17,1.,7.703719777549E-34));+#15117 = DIRECTION('',(0.984807753012,-1.126854202784E-17,+ -0.173648177667));+#15118 = PCURVE('',#2031,#15119);+#15119 = DEFINITIONAL_REPRESENTATION('',(#15120),#15124);+#15120 = CIRCLE('',#15121,0.3);+#15121 = AXIS2_PLACEMENT_2D('',#15122,#15123);+#15122 = CARTESIAN_POINT('',(-0.248953137803,-0.299329353611));+#15123 = DIRECTION('',(-0.173648177667,0.984807753012));+#15124 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15125 = PCURVE('',#15126,#15131);+#15126 = CYLINDRICAL_SURFACE('',#15127,0.3);+#15127 = AXIS2_PLACEMENT_3D('',#15128,#15129,#15130);+#15128 = CARTESIAN_POINT('',(-2.724938966801,0.43,0.3));+#15129 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#15130 = DIRECTION('',(0.984807753012,-1.126854202784E-17,+ -0.173648177667));+#15131 = DEFINITIONAL_REPRESENTATION('',(#15132),#15136);+#15132 = LINE('',#15133,#15134);+#15133 = CARTESIAN_POINT('',(6.28318530718,-0.41));+#15134 = VECTOR('',#15135,1.);+#15135 = DIRECTION('',(-1.,0.));+#15136 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15137 = ORIENTED_EDGE('',*,*,#15138,.T.);+#15138 = EDGE_CURVE('',#15110,#15139,#15141,.T.);+#15139 = VERTEX_POINT('',#15140);+#15140 = CARTESIAN_POINT('',(-3.,0.84,-1.665334536938E-16));+#15141 = SURFACE_CURVE('',#15142,(#15146,#15153),.PCURVE_S1.);+#15142 = LINE('',#15143,#15144);+#15143 = CARTESIAN_POINT('',(-2.724938966801,0.84,-1.665334536938E-16));+#15144 = VECTOR('',#15145,1.);+#15145 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#15146 = PCURVE('',#2031,#15147);+#15147 = DEFINITIONAL_REPRESENTATION('',(#15148),#15152);+#15148 = LINE('',#15149,#15150);+#15149 = CARTESIAN_POINT('',(-0.548953137803,-0.299329353611));+#15150 = VECTOR('',#15151,1.);+#15151 = DIRECTION('',(0.,-1.));+#15152 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15153 = PCURVE('',#15154,#15159);+#15154 = PLANE('',#15155);+#15155 = AXIS2_PLACEMENT_3D('',#15156,#15157,#15158);+#15156 = CARTESIAN_POINT('',(-2.724938966801,0.43,-1.665334536938E-16));+#15157 = DIRECTION('',(0.,0.,1.));+#15158 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#15159 = DEFINITIONAL_REPRESENTATION('',(#15160),#15164);+#15160 = LINE('',#15161,#15162);+#15161 = CARTESIAN_POINT('',(4.69137475541E-18,-0.41));+#15162 = VECTOR('',#15163,1.);+#15163 = DIRECTION('',(1.,0.));+#15164 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15165 = ORIENTED_EDGE('',*,*,#15166,.T.);+#15166 = EDGE_CURVE('',#15139,#15167,#15169,.T.);+#15167 = VERTEX_POINT('',#15168);+#15168 = CARTESIAN_POINT('',(-3.,0.84,0.2));+#15169 = SURFACE_CURVE('',#15170,(#15174,#15181),.PCURVE_S1.);+#15170 = LINE('',#15171,#15172);+#15171 = CARTESIAN_POINT('',(-3.,0.84,-1.665334536938E-16));+#15172 = VECTOR('',#15173,1.);+#15173 = DIRECTION('',(0.,0.,1.));+#15174 = PCURVE('',#2031,#15175);+#15175 = DEFINITIONAL_REPRESENTATION('',(#15176),#15180);+#15176 = LINE('',#15177,#15178);+#15177 = CARTESIAN_POINT('',(-0.548953137803,-0.57439038681));+#15178 = VECTOR('',#15179,1.);+#15179 = DIRECTION('',(1.,0.));+#15180 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15181 = PCURVE('',#15182,#15187);+#15182 = PLANE('',#15183);+#15183 = AXIS2_PLACEMENT_3D('',#15184,#15185,#15186);+#15184 = CARTESIAN_POINT('',(-3.,0.43,-1.665334536938E-16));+#15185 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#15186 = DIRECTION('',(0.,0.,1.));+#15187 = DEFINITIONAL_REPRESENTATION('',(#15188),#15192);+#15188 = LINE('',#15189,#15190);+#15189 = CARTESIAN_POINT('',(0.,-0.41));+#15190 = VECTOR('',#15191,1.);+#15191 = DIRECTION('',(1.,0.));+#15192 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15193 = ORIENTED_EDGE('',*,*,#15194,.T.);+#15194 = EDGE_CURVE('',#15167,#15195,#15197,.T.);+#15195 = VERTEX_POINT('',#15196);+#15196 = CARTESIAN_POINT('',(-2.724938966801,0.84,0.2));+#15197 = SURFACE_CURVE('',#15198,(#15202,#15209),.PCURVE_S1.);+#15198 = LINE('',#15199,#15200);+#15199 = CARTESIAN_POINT('',(-3.,0.84,0.2));+#15200 = VECTOR('',#15201,1.);+#15201 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#15202 = PCURVE('',#2031,#15203);+#15203 = DEFINITIONAL_REPRESENTATION('',(#15204),#15208);+#15204 = LINE('',#15205,#15206);+#15205 = CARTESIAN_POINT('',(-0.348953137803,-0.57439038681));+#15206 = VECTOR('',#15207,1.);+#15207 = DIRECTION('',(0.,1.));+#15208 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15209 = PCURVE('',#15210,#15215);+#15210 = PLANE('',#15211);+#15211 = AXIS2_PLACEMENT_3D('',#15212,#15213,#15214);+#15212 = CARTESIAN_POINT('',(-3.,0.43,0.2));+#15213 = DIRECTION('',(0.,0.,-1.));+#15214 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#15215 = DEFINITIONAL_REPRESENTATION('',(#15216),#15220);+#15216 = LINE('',#15217,#15218);+#15217 = CARTESIAN_POINT('',(-4.69137475541E-18,-0.41));+#15218 = VECTOR('',#15219,1.);+#15219 = DIRECTION('',(1.,0.));+#15220 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15221 = ORIENTED_EDGE('',*,*,#15222,.T.);+#15222 = EDGE_CURVE('',#15195,#15223,#15225,.T.);+#15223 = VERTEX_POINT('',#15224);+#15224 = CARTESIAN_POINT('',(-2.6264581915,0.84,0.282635182233));+#15225 = SURFACE_CURVE('',#15226,(#15231,#15242),.PCURVE_S1.);+#15226 = CIRCLE('',#15227,0.1);+#15227 = AXIS2_PLACEMENT_3D('',#15228,#15229,#15230);+#15228 = CARTESIAN_POINT('',(-2.724938966801,0.84,0.3));+#15229 = DIRECTION('',(-1.144237745222E-17,-1.,-0.));+#15230 = DIRECTION('',(0.,0.,-1.));+#15231 = PCURVE('',#2031,#15232);+#15232 = DEFINITIONAL_REPRESENTATION('',(#15233),#15241);+#15233 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#15234,#15235,#15236,#15237+ ,#15238,#15239,#15240),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#15234 = CARTESIAN_POINT('',(-0.348953137803,-0.299329353611));+#15235 = CARTESIAN_POINT('',(-0.348953137803,-0.126124272854));+#15236 = CARTESIAN_POINT('',(-0.198953137803,-0.212726813233));+#15237 = CARTESIAN_POINT('',(-4.8953137803E-02,-0.299329353611));+#15238 = CARTESIAN_POINT('',(-0.198953137803,-0.385931893989));+#15239 = CARTESIAN_POINT('',(-0.348953137803,-0.472534434368));+#15240 = CARTESIAN_POINT('',(-0.348953137803,-0.299329353611));+#15241 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15242 = PCURVE('',#15243,#15248);+#15243 = CYLINDRICAL_SURFACE('',#15244,0.1);+#15244 = AXIS2_PLACEMENT_3D('',#15245,#15246,#15247);+#15245 = CARTESIAN_POINT('',(-2.724938966801,0.43,0.3));+#15246 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#15247 = DIRECTION('',(-0.,0.,-1.));+#15248 = DEFINITIONAL_REPRESENTATION('',(#15249),#15253);+#15249 = LINE('',#15250,#15251);+#15250 = CARTESIAN_POINT('',(0.,-0.41));+#15251 = VECTOR('',#15252,1.);+#15252 = DIRECTION('',(1.,0.));+#15253 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15254 = ORIENTED_EDGE('',*,*,#15255,.T.);+#15255 = EDGE_CURVE('',#15223,#15256,#15258,.T.);+#15256 = VERTEX_POINT('',#15257);+#15257 = CARTESIAN_POINT('',(-2.545442325904,0.84,0.7770944533));+#15258 = SURFACE_CURVE('',#15259,(#15263,#15270),.PCURVE_S1.);+#15259 = LINE('',#15260,#15261);+#15260 = CARTESIAN_POINT('',(-2.6264581915,0.84,0.282635182233));+#15261 = VECTOR('',#15262,1.);+#15262 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087)+ );+#15263 = PCURVE('',#2031,#15264);+#15264 = DEFINITIONAL_REPRESENTATION('',(#15265),#15269);+#15265 = LINE('',#15266,#15267);+#15266 = CARTESIAN_POINT('',(-0.26631795557,-0.20084857831));+#15267 = VECTOR('',#15268,1.);+#15268 = DIRECTION('',(0.986841372087,0.161691392282));+#15269 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15270 = PCURVE('',#15271,#15276);+#15271 = PLANE('',#15272);+#15272 = AXIS2_PLACEMENT_3D('',#15273,#15274,#15275);+#15273 = CARTESIAN_POINT('',(-2.6264581915,0.43,0.282635182233));+#15274 = DIRECTION('',(0.986841372087,-1.129181146488E-17,+ -0.161691392282));+#15275 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087)+ );+#15276 = DEFINITIONAL_REPRESENTATION('',(#15277),#15281);+#15277 = LINE('',#15278,#15279);+#15278 = CARTESIAN_POINT('',(-7.585549159209E-19,-0.41));+#15279 = VECTOR('',#15280,1.);+#15280 = DIRECTION('',(1.,-5.984962792299E-34));+#15281 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15282 = ORIENTED_EDGE('',*,*,#15283,.T.);+#15283 = EDGE_CURVE('',#15256,#1988,#15284,.T.);+#15284 = SURFACE_CURVE('',#15285,(#15290,#15297),.PCURVE_S1.);+#15285 = CIRCLE('',#15286,0.3);+#15286 = AXIS2_PLACEMENT_3D('',#15287,#15288,#15289);+#15287 = CARTESIAN_POINT('',(-2.25,0.84,0.725));+#15288 = DIRECTION('',(1.144237745222E-17,1.,7.703719777549E-34));+#15289 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667+ ));+#15290 = PCURVE('',#2031,#15291);+#15291 = DEFINITIONAL_REPRESENTATION('',(#15292),#15296);+#15292 = CIRCLE('',#15293,0.3);+#15293 = AXIS2_PLACEMENT_2D('',#15294,#15295);+#15294 = CARTESIAN_POINT('',(0.176046862197,0.17560961319));+#15295 = DIRECTION('',(0.173648177667,-0.984807753012));+#15296 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15297 = PCURVE('',#2003,#15298);+#15298 = DEFINITIONAL_REPRESENTATION('',(#15299),#15303);+#15299 = LINE('',#15300,#15301);+#15300 = CARTESIAN_POINT('',(6.28318530718,-0.41));+#15301 = VECTOR('',#15302,1.);+#15302 = DIRECTION('',(-1.,0.));+#15303 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15304 = ORIENTED_EDGE('',*,*,#2015,.T.);+#15305 = ADVANCED_FACE('',(#15306),#15271,.F.);+#15306 = FACE_BOUND('',#15307,.F.);+#15307 = EDGE_LOOP('',(#15308,#15331,#15332,#15355));+#15308 = ORIENTED_EDGE('',*,*,#15309,.T.);+#15309 = EDGE_CURVE('',#15310,#15223,#15312,.T.);+#15310 = VERTEX_POINT('',#15311);+#15311 = CARTESIAN_POINT('',(-2.6264581915,0.43,0.282635182233));+#15312 = SURFACE_CURVE('',#15313,(#15317,#15324),.PCURVE_S1.);+#15313 = LINE('',#15314,#15315);+#15314 = CARTESIAN_POINT('',(-2.6264581915,0.43,0.282635182233));+#15315 = VECTOR('',#15316,1.);+#15316 = DIRECTION('',(1.144237745222E-17,1.,0.));+#15317 = PCURVE('',#15271,#15318);+#15318 = DEFINITIONAL_REPRESENTATION('',(#15319),#15323);+#15319 = LINE('',#15320,#15321);+#15320 = CARTESIAN_POINT('',(0.,-0.));+#15321 = VECTOR('',#15322,1.);+#15322 = DIRECTION('',(-5.385465771581E-30,-1.));+#15323 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15324 = PCURVE('',#15243,#15325);+#15325 = DEFINITIONAL_REPRESENTATION('',(#15326),#15330);+#15326 = LINE('',#15327,#15328);+#15327 = CARTESIAN_POINT('',(1.396263401592,0.));+#15328 = VECTOR('',#15329,1.);+#15329 = DIRECTION('',(0.,-1.));+#15330 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15331 = ORIENTED_EDGE('',*,*,#15255,.T.);+#15332 = ORIENTED_EDGE('',*,*,#15333,.F.);+#15333 = EDGE_CURVE('',#15334,#15256,#15336,.T.);+#15334 = VERTEX_POINT('',#15335);+#15335 = CARTESIAN_POINT('',(-2.545442325904,0.43,0.7770944533));+#15336 = SURFACE_CURVE('',#15337,(#15341,#15348),.PCURVE_S1.);+#15337 = LINE('',#15338,#15339);+#15338 = CARTESIAN_POINT('',(-2.545442325904,0.43,0.7770944533));+#15339 = VECTOR('',#15340,1.);+#15340 = DIRECTION('',(1.144237745222E-17,1.,0.));+#15341 = PCURVE('',#15271,#15342);+#15342 = DEFINITIONAL_REPRESENTATION('',(#15343),#15347);+#15343 = LINE('',#15344,#15345);+#15344 = CARTESIAN_POINT('',(0.501052433606,-9.270141137704E-19));+#15345 = VECTOR('',#15346,1.);+#15346 = DIRECTION('',(-5.385465771581E-30,-1.));+#15347 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15348 = PCURVE('',#2003,#15349);+#15349 = DEFINITIONAL_REPRESENTATION('',(#15350),#15354);+#15350 = LINE('',#15351,#15352);+#15351 = CARTESIAN_POINT('',(6.28318530718,5.551115123126E-17));+#15352 = VECTOR('',#15353,1.);+#15353 = DIRECTION('',(0.,-1.));+#15354 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15355 = ORIENTED_EDGE('',*,*,#15356,.F.);+#15356 = EDGE_CURVE('',#15310,#15334,#15357,.T.);+#15357 = SURFACE_CURVE('',#15358,(#15362,#15369),.PCURVE_S1.);+#15358 = LINE('',#15359,#15360);+#15359 = CARTESIAN_POINT('',(-2.6264581915,0.43,0.282635182233));+#15360 = VECTOR('',#15361,1.);+#15361 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087)+ );+#15362 = PCURVE('',#15271,#15363);+#15363 = DEFINITIONAL_REPRESENTATION('',(#15364),#15368);+#15364 = LINE('',#15365,#15366);+#15365 = CARTESIAN_POINT('',(0.,-0.));+#15366 = VECTOR('',#15367,1.);+#15367 = DIRECTION('',(1.,-5.984962792299E-34));+#15368 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15369 = PCURVE('',#1975,#15370);+#15370 = DEFINITIONAL_REPRESENTATION('',(#15371),#15375);+#15371 = LINE('',#15372,#15373);+#15372 = CARTESIAN_POINT('',(-0.26631795557,-0.20084857831));+#15373 = VECTOR('',#15374,1.);+#15374 = DIRECTION('',(0.986841372087,0.161691392282));+#15375 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15376 = ADVANCED_FACE('',(#15377),#15243,.F.);+#15377 = FACE_BOUND('',#15378,.F.);+#15378 = EDGE_LOOP('',(#15379,#15402,#15403,#15404));+#15379 = ORIENTED_EDGE('',*,*,#15380,.T.);+#15380 = EDGE_CURVE('',#15381,#15195,#15383,.T.);+#15381 = VERTEX_POINT('',#15382);+#15382 = CARTESIAN_POINT('',(-2.724938966801,0.43,0.2));+#15383 = SURFACE_CURVE('',#15384,(#15388,#15395),.PCURVE_S1.);+#15384 = LINE('',#15385,#15386);+#15385 = CARTESIAN_POINT('',(-2.724938966801,0.43,0.2));+#15386 = VECTOR('',#15387,1.);+#15387 = DIRECTION('',(1.144237745222E-17,1.,0.));+#15388 = PCURVE('',#15243,#15389);+#15389 = DEFINITIONAL_REPRESENTATION('',(#15390),#15394);+#15390 = LINE('',#15391,#15392);+#15391 = CARTESIAN_POINT('',(0.,0.));+#15392 = VECTOR('',#15393,1.);+#15393 = DIRECTION('',(0.,-1.));+#15394 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15395 = PCURVE('',#15210,#15396);+#15396 = DEFINITIONAL_REPRESENTATION('',(#15397),#15401);+#15397 = LINE('',#15398,#15399);+#15398 = CARTESIAN_POINT('',(0.275061033199,-3.147352164261E-18));+#15399 = VECTOR('',#15400,1.);+#15400 = DIRECTION('',(0.,-1.));+#15401 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15402 = ORIENTED_EDGE('',*,*,#15222,.T.);+#15403 = ORIENTED_EDGE('',*,*,#15309,.F.);+#15404 = ORIENTED_EDGE('',*,*,#15405,.F.);+#15405 = EDGE_CURVE('',#15381,#15310,#15406,.T.);+#15406 = SURFACE_CURVE('',#15407,(#15412,#15419),.PCURVE_S1.);+#15407 = CIRCLE('',#15408,0.1);+#15408 = AXIS2_PLACEMENT_3D('',#15409,#15410,#15411);+#15409 = CARTESIAN_POINT('',(-2.724938966801,0.43,0.3));+#15410 = DIRECTION('',(-1.144237745222E-17,-1.,-0.));+#15411 = DIRECTION('',(0.,0.,-1.));+#15412 = PCURVE('',#15243,#15413);+#15413 = DEFINITIONAL_REPRESENTATION('',(#15414),#15418);+#15414 = LINE('',#15415,#15416);+#15415 = CARTESIAN_POINT('',(0.,0.));+#15416 = VECTOR('',#15417,1.);+#15417 = DIRECTION('',(1.,0.));+#15418 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15419 = PCURVE('',#1975,#15420);+#15420 = DEFINITIONAL_REPRESENTATION('',(#15421),#15429);+#15421 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#15422,#15423,#15424,#15425+ ,#15426,#15427,#15428),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#15422 = CARTESIAN_POINT('',(-0.348953137803,-0.299329353611));+#15423 = CARTESIAN_POINT('',(-0.348953137803,-0.126124272854));+#15424 = CARTESIAN_POINT('',(-0.198953137803,-0.212726813233));+#15425 = CARTESIAN_POINT('',(-4.8953137803E-02,-0.299329353611));+#15426 = CARTESIAN_POINT('',(-0.198953137803,-0.385931893989));+#15427 = CARTESIAN_POINT('',(-0.348953137803,-0.472534434368));+#15428 = CARTESIAN_POINT('',(-0.348953137803,-0.299329353611));+#15429 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15430 = ADVANCED_FACE('',(#15431),#15210,.F.);+#15431 = FACE_BOUND('',#15432,.F.);+#15432 = EDGE_LOOP('',(#15433,#15456,#15457,#15458));+#15433 = ORIENTED_EDGE('',*,*,#15434,.T.);+#15434 = EDGE_CURVE('',#15435,#15167,#15437,.T.);+#15435 = VERTEX_POINT('',#15436);+#15436 = CARTESIAN_POINT('',(-3.,0.43,0.2));+#15437 = SURFACE_CURVE('',#15438,(#15442,#15449),.PCURVE_S1.);+#15438 = LINE('',#15439,#15440);+#15439 = CARTESIAN_POINT('',(-3.,0.43,0.2));+#15440 = VECTOR('',#15441,1.);+#15441 = DIRECTION('',(1.144237745222E-17,1.,0.));+#15442 = PCURVE('',#15210,#15443);+#15443 = DEFINITIONAL_REPRESENTATION('',(#15444),#15448);+#15444 = LINE('',#15445,#15446);+#15445 = CARTESIAN_POINT('',(0.,-0.));+#15446 = VECTOR('',#15447,1.);+#15447 = DIRECTION('',(0.,-1.));+#15448 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15449 = PCURVE('',#15182,#15450);+#15450 = DEFINITIONAL_REPRESENTATION('',(#15451),#15455);+#15451 = LINE('',#15452,#15453);+#15452 = CARTESIAN_POINT('',(0.2,0.));+#15453 = VECTOR('',#15454,1.);+#15454 = DIRECTION('',(0.,-1.));+#15455 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15456 = ORIENTED_EDGE('',*,*,#15194,.T.);+#15457 = ORIENTED_EDGE('',*,*,#15380,.F.);+#15458 = ORIENTED_EDGE('',*,*,#15459,.F.);+#15459 = EDGE_CURVE('',#15435,#15381,#15460,.T.);+#15460 = SURFACE_CURVE('',#15461,(#15465,#15472),.PCURVE_S1.);+#15461 = LINE('',#15462,#15463);+#15462 = CARTESIAN_POINT('',(-3.,0.43,0.2));+#15463 = VECTOR('',#15464,1.);+#15464 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#15465 = PCURVE('',#15210,#15466);+#15466 = DEFINITIONAL_REPRESENTATION('',(#15467),#15471);+#15467 = LINE('',#15468,#15469);+#15468 = CARTESIAN_POINT('',(0.,-0.));+#15469 = VECTOR('',#15470,1.);+#15470 = DIRECTION('',(1.,0.));+#15471 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15472 = PCURVE('',#1975,#15473);+#15473 = DEFINITIONAL_REPRESENTATION('',(#15474),#15478);+#15474 = LINE('',#15475,#15476);+#15475 = CARTESIAN_POINT('',(-0.348953137803,-0.57439038681));+#15476 = VECTOR('',#15477,1.);+#15477 = DIRECTION('',(0.,1.));+#15478 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15479 = ADVANCED_FACE('',(#15480),#15182,.F.);+#15480 = FACE_BOUND('',#15481,.F.);+#15481 = EDGE_LOOP('',(#15482,#15505,#15506,#15507));+#15482 = ORIENTED_EDGE('',*,*,#15483,.T.);+#15483 = EDGE_CURVE('',#15484,#15139,#15486,.T.);+#15484 = VERTEX_POINT('',#15485);+#15485 = CARTESIAN_POINT('',(-3.,0.43,-1.665334536938E-16));+#15486 = SURFACE_CURVE('',#15487,(#15491,#15498),.PCURVE_S1.);+#15487 = LINE('',#15488,#15489);+#15488 = CARTESIAN_POINT('',(-3.,0.43,-1.665334536938E-16));+#15489 = VECTOR('',#15490,1.);+#15490 = DIRECTION('',(1.144237745222E-17,1.,0.));+#15491 = PCURVE('',#15182,#15492);+#15492 = DEFINITIONAL_REPRESENTATION('',(#15493),#15497);+#15493 = LINE('',#15494,#15495);+#15494 = CARTESIAN_POINT('',(0.,0.));+#15495 = VECTOR('',#15496,1.);+#15496 = DIRECTION('',(0.,-1.));+#15497 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15498 = PCURVE('',#15154,#15499);+#15499 = DEFINITIONAL_REPRESENTATION('',(#15500),#15504);+#15500 = LINE('',#15501,#15502);+#15501 = CARTESIAN_POINT('',(0.275061033199,3.147352164261E-18));+#15502 = VECTOR('',#15503,1.);+#15503 = DIRECTION('',(0.,-1.));+#15504 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15505 = ORIENTED_EDGE('',*,*,#15166,.T.);+#15506 = ORIENTED_EDGE('',*,*,#15434,.F.);+#15507 = ORIENTED_EDGE('',*,*,#15508,.F.);+#15508 = EDGE_CURVE('',#15484,#15435,#15509,.T.);+#15509 = SURFACE_CURVE('',#15510,(#15514,#15521),.PCURVE_S1.);+#15510 = LINE('',#15511,#15512);+#15511 = CARTESIAN_POINT('',(-3.,0.43,-1.665334536938E-16));+#15512 = VECTOR('',#15513,1.);+#15513 = DIRECTION('',(0.,0.,1.));+#15514 = PCURVE('',#15182,#15515);+#15515 = DEFINITIONAL_REPRESENTATION('',(#15516),#15520);+#15516 = LINE('',#15517,#15518);+#15517 = CARTESIAN_POINT('',(0.,0.));+#15518 = VECTOR('',#15519,1.);+#15519 = DIRECTION('',(1.,0.));+#15520 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15521 = PCURVE('',#1975,#15522);+#15522 = DEFINITIONAL_REPRESENTATION('',(#15523),#15527);+#15523 = LINE('',#15524,#15525);+#15524 = CARTESIAN_POINT('',(-0.548953137803,-0.57439038681));+#15525 = VECTOR('',#15526,1.);+#15526 = DIRECTION('',(1.,0.));+#15527 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15528 = ADVANCED_FACE('',(#15529),#15154,.F.);+#15529 = FACE_BOUND('',#15530,.F.);+#15530 = EDGE_LOOP('',(#15531,#15554,#15555,#15556));+#15531 = ORIENTED_EDGE('',*,*,#15532,.T.);+#15532 = EDGE_CURVE('',#15533,#15110,#15535,.T.);+#15533 = VERTEX_POINT('',#15534);+#15534 = CARTESIAN_POINT('',(-2.724938966801,0.43,-1.665334536938E-16));+#15535 = SURFACE_CURVE('',#15536,(#15540,#15547),.PCURVE_S1.);+#15536 = LINE('',#15537,#15538);+#15537 = CARTESIAN_POINT('',(-2.724938966801,0.43,-1.665334536938E-16));+#15538 = VECTOR('',#15539,1.);+#15539 = DIRECTION('',(1.144237745222E-17,1.,0.));+#15540 = PCURVE('',#15154,#15541);+#15541 = DEFINITIONAL_REPRESENTATION('',(#15542),#15546);+#15542 = LINE('',#15543,#15544);+#15543 = CARTESIAN_POINT('',(0.,0.));+#15544 = VECTOR('',#15545,1.);+#15545 = DIRECTION('',(0.,-1.));+#15546 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15547 = PCURVE('',#15126,#15548);+#15548 = DEFINITIONAL_REPRESENTATION('',(#15549),#15553);+#15549 = LINE('',#15550,#15551);+#15550 = CARTESIAN_POINT('',(4.886921905584,0.));+#15551 = VECTOR('',#15552,1.);+#15552 = DIRECTION('',(0.,-1.));+#15553 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15554 = ORIENTED_EDGE('',*,*,#15138,.T.);+#15555 = ORIENTED_EDGE('',*,*,#15483,.F.);+#15556 = ORIENTED_EDGE('',*,*,#15557,.F.);+#15557 = EDGE_CURVE('',#15533,#15484,#15558,.T.);+#15558 = SURFACE_CURVE('',#15559,(#15563,#15570),.PCURVE_S1.);+#15559 = LINE('',#15560,#15561);+#15560 = CARTESIAN_POINT('',(-2.724938966801,0.43,-1.665334536938E-16));+#15561 = VECTOR('',#15562,1.);+#15562 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#15563 = PCURVE('',#15154,#15564);+#15564 = DEFINITIONAL_REPRESENTATION('',(#15565),#15569);+#15565 = LINE('',#15566,#15567);+#15566 = CARTESIAN_POINT('',(0.,0.));+#15567 = VECTOR('',#15568,1.);+#15568 = DIRECTION('',(1.,0.));+#15569 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15570 = PCURVE('',#1975,#15571);+#15571 = DEFINITIONAL_REPRESENTATION('',(#15572),#15576);+#15572 = LINE('',#15573,#15574);+#15573 = CARTESIAN_POINT('',(-0.548953137803,-0.299329353611));+#15574 = VECTOR('',#15575,1.);+#15575 = DIRECTION('',(0.,-1.));+#15576 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15577 = ADVANCED_FACE('',(#15578),#15126,.T.);+#15578 = FACE_BOUND('',#15579,.T.);+#15579 = EDGE_LOOP('',(#15580,#15604,#15605,#15606));+#15580 = ORIENTED_EDGE('',*,*,#15581,.T.);+#15581 = EDGE_CURVE('',#15582,#15533,#15584,.T.);+#15582 = VERTEX_POINT('',#15583);+#15583 = CARTESIAN_POINT('',(-2.429496640897,0.43,0.2479055467));+#15584 = SURFACE_CURVE('',#15585,(#15590,#15597),.PCURVE_S1.);+#15585 = CIRCLE('',#15586,0.3);+#15586 = AXIS2_PLACEMENT_3D('',#15587,#15588,#15589);+#15587 = CARTESIAN_POINT('',(-2.724938966801,0.43,0.3));+#15588 = DIRECTION('',(1.144237745222E-17,1.,7.703719777549E-34));+#15589 = DIRECTION('',(0.984807753012,-1.126854202784E-17,+ -0.173648177667));+#15590 = PCURVE('',#15126,#15591);+#15591 = DEFINITIONAL_REPRESENTATION('',(#15592),#15596);+#15592 = LINE('',#15593,#15594);+#15593 = CARTESIAN_POINT('',(6.28318530718,0.));+#15594 = VECTOR('',#15595,1.);+#15595 = DIRECTION('',(-1.,0.));+#15596 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15597 = PCURVE('',#1975,#15598);+#15598 = DEFINITIONAL_REPRESENTATION('',(#15599),#15603);+#15599 = CIRCLE('',#15600,0.3);+#15600 = AXIS2_PLACEMENT_2D('',#15601,#15602);+#15601 = CARTESIAN_POINT('',(-0.248953137803,-0.299329353611));+#15602 = DIRECTION('',(-0.173648177667,0.984807753012));+#15603 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15604 = ORIENTED_EDGE('',*,*,#15532,.T.);+#15605 = ORIENTED_EDGE('',*,*,#15109,.F.);+#15606 = ORIENTED_EDGE('',*,*,#15607,.F.);+#15607 = EDGE_CURVE('',#15582,#15082,#15608,.T.);+#15608 = SURFACE_CURVE('',#15609,(#15613,#15620),.PCURVE_S1.);+#15609 = LINE('',#15610,#15611);+#15610 = CARTESIAN_POINT('',(-2.429496640897,0.43,0.2479055467));+#15611 = VECTOR('',#15612,1.);+#15612 = DIRECTION('',(1.144237745222E-17,1.,0.));+#15613 = PCURVE('',#15126,#15614);+#15614 = DEFINITIONAL_REPRESENTATION('',(#15615),#15619);+#15615 = LINE('',#15616,#15617);+#15616 = CARTESIAN_POINT('',(6.28318530718,0.));+#15617 = VECTOR('',#15618,1.);+#15618 = DIRECTION('',(0.,-1.));+#15619 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15620 = PCURVE('',#15097,#15621);+#15621 = DEFINITIONAL_REPRESENTATION('',(#15622),#15626);+#15622 = LINE('',#15623,#15624);+#15623 = CARTESIAN_POINT('',(0.501052433606,9.270141137704E-19));+#15624 = VECTOR('',#15625,1.);+#15625 = DIRECTION('',(5.385465771581E-30,-1.));+#15626 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15627 = ADVANCED_FACE('',(#15628),#15097,.F.);+#15628 = FACE_BOUND('',#15629,.F.);+#15629 = EDGE_LOOP('',(#15630,#15653,#15654,#15655));+#15630 = ORIENTED_EDGE('',*,*,#15631,.T.);+#15631 = EDGE_CURVE('',#15632,#15049,#15634,.T.);+#15632 = VERTEX_POINT('',#15633);+#15633 = CARTESIAN_POINT('',(-2.348480775301,0.43,0.742364817767));+#15634 = SURFACE_CURVE('',#15635,(#15639,#15646),.PCURVE_S1.);+#15635 = LINE('',#15636,#15637);+#15636 = CARTESIAN_POINT('',(-2.348480775301,0.43,0.742364817767));+#15637 = VECTOR('',#15638,1.);+#15638 = DIRECTION('',(1.144237745222E-17,1.,0.));+#15639 = PCURVE('',#15097,#15640);+#15640 = DEFINITIONAL_REPRESENTATION('',(#15641),#15645);+#15641 = LINE('',#15642,#15643);+#15642 = CARTESIAN_POINT('',(0.,-0.));+#15643 = VECTOR('',#15644,1.);+#15644 = DIRECTION('',(5.385465771581E-30,-1.));+#15645 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15646 = PCURVE('',#15069,#15647);+#15647 = DEFINITIONAL_REPRESENTATION('',(#15648),#15652);+#15648 = LINE('',#15649,#15650);+#15649 = CARTESIAN_POINT('',(1.396263401592,0.));+#15650 = VECTOR('',#15651,1.);+#15651 = DIRECTION('',(0.,-1.));+#15652 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15653 = ORIENTED_EDGE('',*,*,#15081,.T.);+#15654 = ORIENTED_EDGE('',*,*,#15607,.F.);+#15655 = ORIENTED_EDGE('',*,*,#15656,.F.);+#15656 = EDGE_CURVE('',#15632,#15582,#15657,.T.);+#15657 = SURFACE_CURVE('',#15658,(#15662,#15669),.PCURVE_S1.);+#15658 = LINE('',#15659,#15660);+#15659 = CARTESIAN_POINT('',(-2.348480775301,0.43,0.742364817767));+#15660 = VECTOR('',#15661,1.);+#15661 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087+ ));+#15662 = PCURVE('',#15097,#15663);+#15663 = DEFINITIONAL_REPRESENTATION('',(#15664),#15668);+#15664 = LINE('',#15665,#15666);+#15665 = CARTESIAN_POINT('',(0.,-0.));+#15666 = VECTOR('',#15667,1.);+#15667 = DIRECTION('',(1.,5.984962792299E-34));+#15668 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15669 = PCURVE('',#1975,#15670);+#15670 = DEFINITIONAL_REPRESENTATION('',(#15671),#15675);+#15671 = LINE('',#15672,#15673);+#15672 = CARTESIAN_POINT('',(0.193411679964,7.7128837889E-02));+#15673 = VECTOR('',#15674,1.);+#15674 = DIRECTION('',(-0.986841372087,-0.161691392282));+#15675 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15676 = ADVANCED_FACE('',(#15677),#15069,.F.);+#15677 = FACE_BOUND('',#15678,.F.);+#15678 = EDGE_LOOP('',(#15679,#15702,#15703,#15704));+#15679 = ORIENTED_EDGE('',*,*,#15680,.T.);+#15680 = EDGE_CURVE('',#15681,#15026,#15683,.T.);+#15681 = VERTEX_POINT('',#15682);+#15682 = CARTESIAN_POINT('',(-2.25,0.43,0.825));+#15683 = SURFACE_CURVE('',#15684,(#15688,#15695),.PCURVE_S1.);+#15684 = LINE('',#15685,#15686);+#15685 = CARTESIAN_POINT('',(-2.25,0.43,0.825));+#15686 = VECTOR('',#15687,1.);+#15687 = DIRECTION('',(1.144237745222E-17,1.,0.));+#15688 = PCURVE('',#15069,#15689);+#15689 = DEFINITIONAL_REPRESENTATION('',(#15690),#15694);+#15690 = LINE('',#15691,#15692);+#15691 = CARTESIAN_POINT('',(0.,0.));+#15692 = VECTOR('',#15693,1.);+#15693 = DIRECTION('',(0.,-1.));+#15694 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15695 = PCURVE('',#362,#15696);+#15696 = DEFINITIONAL_REPRESENTATION('',(#15697),#15701);+#15697 = LINE('',#15698,#15699);+#15698 = CARTESIAN_POINT('',(0.45,5.149069853499E-18));+#15699 = VECTOR('',#15700,1.);+#15700 = DIRECTION('',(0.,-1.));+#15701 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15702 = ORIENTED_EDGE('',*,*,#15048,.T.);+#15703 = ORIENTED_EDGE('',*,*,#15631,.F.);+#15704 = ORIENTED_EDGE('',*,*,#15705,.F.);+#15705 = EDGE_CURVE('',#15681,#15632,#15706,.T.);+#15706 = SURFACE_CURVE('',#15707,(#15712,#15719),.PCURVE_S1.);+#15707 = CIRCLE('',#15708,0.1);+#15708 = AXIS2_PLACEMENT_3D('',#15709,#15710,#15711);+#15709 = CARTESIAN_POINT('',(-2.25,0.43,0.725));+#15710 = DIRECTION('',(-1.144237745222E-17,-1.,3.284293275761E-47));+#15711 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.));+#15712 = PCURVE('',#15069,#15713);+#15713 = DEFINITIONAL_REPRESENTATION('',(#15714),#15718);+#15714 = LINE('',#15715,#15716);+#15715 = CARTESIAN_POINT('',(0.,0.));+#15716 = VECTOR('',#15717,1.);+#15717 = DIRECTION('',(1.,0.));+#15718 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15719 = PCURVE('',#1975,#15720);+#15720 = DEFINITIONAL_REPRESENTATION('',(#15721),#15729);+#15721 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#15722,#15723,#15724,#15725+ ,#15726,#15727,#15728),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#15722 = CARTESIAN_POINT('',(0.276046862197,0.17560961319));+#15723 = CARTESIAN_POINT('',(0.276046862197,2.404532433112E-03));+#15724 = CARTESIAN_POINT('',(0.126046862197,8.900707281156E-02));+#15725 = CARTESIAN_POINT('',(-2.3953137803E-02,0.17560961319));+#15726 = CARTESIAN_POINT('',(0.126046862197,0.262212153568));+#15727 = CARTESIAN_POINT('',(0.276046862197,0.348814693947));+#15728 = CARTESIAN_POINT('',(0.276046862197,0.17560961319));+#15729 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15730 = ADVANCED_FACE('',(#15731),#2003,.T.);+#15731 = FACE_BOUND('',#15732,.T.);+#15732 = EDGE_LOOP('',(#15733,#15755,#15756,#15757));+#15733 = ORIENTED_EDGE('',*,*,#15734,.T.);+#15734 = EDGE_CURVE('',#15334,#1960,#15735,.T.);+#15735 = SURFACE_CURVE('',#15736,(#15741,#15748),.PCURVE_S1.);+#15736 = CIRCLE('',#15737,0.3);+#15737 = AXIS2_PLACEMENT_3D('',#15738,#15739,#15740);+#15738 = CARTESIAN_POINT('',(-2.25,0.43,0.725));+#15739 = DIRECTION('',(1.144237745222E-17,1.,7.703719777549E-34));+#15740 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667+ ));+#15741 = PCURVE('',#2003,#15742);+#15742 = DEFINITIONAL_REPRESENTATION('',(#15743),#15747);+#15743 = LINE('',#15744,#15745);+#15744 = CARTESIAN_POINT('',(6.28318530718,5.551115123126E-17));+#15745 = VECTOR('',#15746,1.);+#15746 = DIRECTION('',(-1.,-3.97569335183E-17));+#15747 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15748 = PCURVE('',#1975,#15749);+#15749 = DEFINITIONAL_REPRESENTATION('',(#15750),#15754);+#15750 = CIRCLE('',#15751,0.3);+#15751 = AXIS2_PLACEMENT_2D('',#15752,#15753);+#15752 = CARTESIAN_POINT('',(0.176046862197,0.17560961319));+#15753 = DIRECTION('',(0.173648177667,-0.984807753012));+#15754 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15755 = ORIENTED_EDGE('',*,*,#1987,.T.);+#15756 = ORIENTED_EDGE('',*,*,#15283,.F.);+#15757 = ORIENTED_EDGE('',*,*,#15333,.F.);+#15758 = ADVANCED_FACE('',(#15759),#1975,.F.);+#15759 = FACE_BOUND('',#15760,.F.);+#15760 = EDGE_LOOP('',(#15761,#15782,#15803,#15804,#15805,#15806,#15807,+ #15808,#15809,#15810,#15811,#15812));+#15761 = ORIENTED_EDGE('',*,*,#15762,.F.);+#15762 = EDGE_CURVE('',#347,#1937,#15763,.T.);+#15763 = SURFACE_CURVE('',#15764,(#15768,#15775),.PCURVE_S1.);+#15764 = LINE('',#15765,#15766);+#15765 = CARTESIAN_POINT('',(-1.95,0.43,0.786976568901));+#15766 = VECTOR('',#15767,1.);+#15767 = DIRECTION('',(0.,0.,1.));+#15768 = PCURVE('',#1975,#15769);+#15769 = DEFINITIONAL_REPRESENTATION('',(#15770),#15774);+#15770 = LINE('',#15771,#15772);+#15771 = CARTESIAN_POINT('',(0.238023431098,0.47560961319));+#15772 = VECTOR('',#15773,1.);+#15773 = DIRECTION('',(1.,0.));+#15774 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15775 = PCURVE('',#390,#15776);+#15776 = DEFINITIONAL_REPRESENTATION('',(#15777),#15781);+#15777 = LINE('',#15778,#15779);+#15778 = CARTESIAN_POINT('',(2.705,-0.238023431099));+#15779 = VECTOR('',#15780,1.);+#15780 = DIRECTION('',(0.,1.));+#15781 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15782 = ORIENTED_EDGE('',*,*,#15783,.T.);+#15783 = EDGE_CURVE('',#347,#15681,#15784,.T.);+#15784 = SURFACE_CURVE('',#15785,(#15789,#15796),.PCURVE_S1.);+#15785 = LINE('',#15786,#15787);+#15786 = CARTESIAN_POINT('',(-1.8,0.43,0.825));+#15787 = VECTOR('',#15788,1.);+#15788 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#15789 = PCURVE('',#1975,#15790);+#15790 = DEFINITIONAL_REPRESENTATION('',(#15791),#15795);+#15791 = LINE('',#15792,#15793);+#15792 = CARTESIAN_POINT('',(0.276046862197,0.62560961319));+#15793 = VECTOR('',#15794,1.);+#15794 = DIRECTION('',(0.,-1.));+#15795 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15796 = PCURVE('',#362,#15797);+#15797 = DEFINITIONAL_REPRESENTATION('',(#15798),#15802);+#15798 = LINE('',#15799,#15800);+#15799 = CARTESIAN_POINT('',(0.,0.));+#15800 = VECTOR('',#15801,1.);+#15801 = DIRECTION('',(1.,0.));+#15802 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15803 = ORIENTED_EDGE('',*,*,#15705,.T.);+#15804 = ORIENTED_EDGE('',*,*,#15656,.T.);+#15805 = ORIENTED_EDGE('',*,*,#15581,.T.);+#15806 = ORIENTED_EDGE('',*,*,#15557,.T.);+#15807 = ORIENTED_EDGE('',*,*,#15508,.T.);+#15808 = ORIENTED_EDGE('',*,*,#15459,.T.);+#15809 = ORIENTED_EDGE('',*,*,#15405,.T.);+#15810 = ORIENTED_EDGE('',*,*,#15356,.T.);+#15811 = ORIENTED_EDGE('',*,*,#15734,.T.);+#15812 = ORIENTED_EDGE('',*,*,#1959,.T.);+#15813 = ADVANCED_FACE('',(#15814),#1924,.T.);+#15814 = FACE_BOUND('',#15815,.T.);+#15815 = EDGE_LOOP('',(#15816,#15837,#15860,#15893,#15921,#15950,#15978,+ #16006,#16034,#16067,#16095,#16117));+#15816 = ORIENTED_EDGE('',*,*,#15817,.F.);+#15817 = EDGE_CURVE('',#375,#1909,#15818,.T.);+#15818 = SURFACE_CURVE('',#15819,(#15823,#15830),.PCURVE_S1.);+#15819 = LINE('',#15820,#15821);+#15820 = CARTESIAN_POINT('',(-1.95,-0.43,0.786976568901));+#15821 = VECTOR('',#15822,1.);+#15822 = DIRECTION('',(0.,0.,1.));+#15823 = PCURVE('',#1924,#15824);+#15824 = DEFINITIONAL_REPRESENTATION('',(#15825),#15829);+#15825 = LINE('',#15826,#15827);+#15826 = CARTESIAN_POINT('',(0.238023431098,0.47560961319));+#15827 = VECTOR('',#15828,1.);+#15828 = DIRECTION('',(1.,0.));+#15829 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15830 = PCURVE('',#390,#15831);+#15831 = DEFINITIONAL_REPRESENTATION('',(#15832),#15836);+#15832 = LINE('',#15833,#15834);+#15833 = CARTESIAN_POINT('',(1.845,-0.238023431099));+#15834 = VECTOR('',#15835,1.);+#15835 = DIRECTION('',(0.,1.));+#15836 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15837 = ORIENTED_EDGE('',*,*,#15838,.T.);+#15838 = EDGE_CURVE('',#375,#15839,#15841,.T.);+#15839 = VERTEX_POINT('',#15840);+#15840 = CARTESIAN_POINT('',(-2.25,-0.43,0.825));+#15841 = SURFACE_CURVE('',#15842,(#15846,#15853),.PCURVE_S1.);+#15842 = LINE('',#15843,#15844);+#15843 = CARTESIAN_POINT('',(-1.8,-0.43,0.825));+#15844 = VECTOR('',#15845,1.);+#15845 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#15846 = PCURVE('',#1924,#15847);+#15847 = DEFINITIONAL_REPRESENTATION('',(#15848),#15852);+#15848 = LINE('',#15849,#15850);+#15849 = CARTESIAN_POINT('',(0.276046862197,0.62560961319));+#15850 = VECTOR('',#15851,1.);+#15851 = DIRECTION('',(0.,-1.));+#15852 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15853 = PCURVE('',#418,#15854);+#15854 = DEFINITIONAL_REPRESENTATION('',(#15855),#15859);+#15855 = LINE('',#15856,#15857);+#15856 = CARTESIAN_POINT('',(4.69137475541E-18,-0.41));+#15857 = VECTOR('',#15858,1.);+#15858 = DIRECTION('',(1.,0.));+#15859 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15860 = ORIENTED_EDGE('',*,*,#15861,.T.);+#15861 = EDGE_CURVE('',#15839,#15862,#15864,.T.);+#15862 = VERTEX_POINT('',#15863);+#15863 = CARTESIAN_POINT('',(-2.348480775301,-0.43,0.742364817767));+#15864 = SURFACE_CURVE('',#15865,(#15870,#15881),.PCURVE_S1.);+#15865 = CIRCLE('',#15866,0.1);+#15866 = AXIS2_PLACEMENT_3D('',#15867,#15868,#15869);+#15867 = CARTESIAN_POINT('',(-2.25,-0.43,0.725));+#15868 = DIRECTION('',(-1.144237745222E-17,-1.,3.284293275761E-47));+#15869 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.));+#15870 = PCURVE('',#1924,#15871);+#15871 = DEFINITIONAL_REPRESENTATION('',(#15872),#15880);+#15872 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#15873,#15874,#15875,#15876+ ,#15877,#15878,#15879),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#15873 = CARTESIAN_POINT('',(0.276046862197,0.17560961319));+#15874 = CARTESIAN_POINT('',(0.276046862197,2.404532433112E-03));+#15875 = CARTESIAN_POINT('',(0.126046862197,8.900707281156E-02));+#15876 = CARTESIAN_POINT('',(-2.3953137803E-02,0.17560961319));+#15877 = CARTESIAN_POINT('',(0.126046862197,0.262212153568));+#15878 = CARTESIAN_POINT('',(0.276046862197,0.348814693947));+#15879 = CARTESIAN_POINT('',(0.276046862197,0.17560961319));+#15880 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15881 = PCURVE('',#15882,#15887);+#15882 = CYLINDRICAL_SURFACE('',#15883,0.1);+#15883 = AXIS2_PLACEMENT_3D('',#15884,#15885,#15886);+#15884 = CARTESIAN_POINT('',(-2.25,-0.84,0.725));+#15885 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#15886 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.));+#15887 = DEFINITIONAL_REPRESENTATION('',(#15888),#15892);+#15888 = LINE('',#15889,#15890);+#15889 = CARTESIAN_POINT('',(0.,-0.41));+#15890 = VECTOR('',#15891,1.);+#15891 = DIRECTION('',(1.,0.));+#15892 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15893 = ORIENTED_EDGE('',*,*,#15894,.T.);+#15894 = EDGE_CURVE('',#15862,#15895,#15897,.T.);+#15895 = VERTEX_POINT('',#15896);+#15896 = CARTESIAN_POINT('',(-2.429496640897,-0.43,0.2479055467));+#15897 = SURFACE_CURVE('',#15898,(#15902,#15909),.PCURVE_S1.);+#15898 = LINE('',#15899,#15900);+#15899 = CARTESIAN_POINT('',(-2.348480775301,-0.43,0.742364817767));+#15900 = VECTOR('',#15901,1.);+#15901 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087+ ));+#15902 = PCURVE('',#1924,#15903);+#15903 = DEFINITIONAL_REPRESENTATION('',(#15904),#15908);+#15904 = LINE('',#15905,#15906);+#15905 = CARTESIAN_POINT('',(0.193411679964,7.7128837889E-02));+#15906 = VECTOR('',#15907,1.);+#15907 = DIRECTION('',(-0.986841372087,-0.161691392282));+#15908 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15909 = PCURVE('',#15910,#15915);+#15910 = PLANE('',#15911);+#15911 = AXIS2_PLACEMENT_3D('',#15912,#15913,#15914);+#15912 = CARTESIAN_POINT('',(-2.348480775301,-0.84,0.742364817767));+#15913 = DIRECTION('',(-0.986841372087,1.129181146488E-17,0.161691392282+ ));+#15914 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087+ ));+#15915 = DEFINITIONAL_REPRESENTATION('',(#15916),#15920);+#15916 = LINE('',#15917,#15918);+#15917 = CARTESIAN_POINT('',(7.585549159209E-19,-0.41));+#15918 = VECTOR('',#15919,1.);+#15919 = DIRECTION('',(1.,5.984962792299E-34));+#15920 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15921 = ORIENTED_EDGE('',*,*,#15922,.T.);+#15922 = EDGE_CURVE('',#15895,#15923,#15925,.T.);+#15923 = VERTEX_POINT('',#15924);+#15924 = CARTESIAN_POINT('',(-2.724938966801,-0.43,-1.665334536938E-16)+ );+#15925 = SURFACE_CURVE('',#15926,(#15931,#15938),.PCURVE_S1.);+#15926 = CIRCLE('',#15927,0.3);+#15927 = AXIS2_PLACEMENT_3D('',#15928,#15929,#15930);+#15928 = CARTESIAN_POINT('',(-2.724938966801,-0.43,0.3));+#15929 = DIRECTION('',(1.144237745222E-17,1.,7.703719777549E-34));+#15930 = DIRECTION('',(0.984807753012,-1.126854202784E-17,+ -0.173648177667));+#15931 = PCURVE('',#1924,#15932);+#15932 = DEFINITIONAL_REPRESENTATION('',(#15933),#15937);+#15933 = CIRCLE('',#15934,0.3);+#15934 = AXIS2_PLACEMENT_2D('',#15935,#15936);+#15935 = CARTESIAN_POINT('',(-0.248953137803,-0.299329353611));+#15936 = DIRECTION('',(-0.173648177667,0.984807753012));+#15937 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15938 = PCURVE('',#15939,#15944);+#15939 = CYLINDRICAL_SURFACE('',#15940,0.3);+#15940 = AXIS2_PLACEMENT_3D('',#15941,#15942,#15943);+#15941 = CARTESIAN_POINT('',(-2.724938966801,-0.84,0.3));+#15942 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#15943 = DIRECTION('',(0.984807753012,-1.126854202784E-17,+ -0.173648177667));+#15944 = DEFINITIONAL_REPRESENTATION('',(#15945),#15949);+#15945 = LINE('',#15946,#15947);+#15946 = CARTESIAN_POINT('',(6.28318530718,-0.41));+#15947 = VECTOR('',#15948,1.);+#15948 = DIRECTION('',(-1.,0.));+#15949 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15950 = ORIENTED_EDGE('',*,*,#15951,.T.);+#15951 = EDGE_CURVE('',#15923,#15952,#15954,.T.);+#15952 = VERTEX_POINT('',#15953);+#15953 = CARTESIAN_POINT('',(-3.,-0.43,-1.665334536938E-16));+#15954 = SURFACE_CURVE('',#15955,(#15959,#15966),.PCURVE_S1.);+#15955 = LINE('',#15956,#15957);+#15956 = CARTESIAN_POINT('',(-2.724938966801,-0.43,-1.665334536938E-16)+ );+#15957 = VECTOR('',#15958,1.);+#15958 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#15959 = PCURVE('',#1924,#15960);+#15960 = DEFINITIONAL_REPRESENTATION('',(#15961),#15965);+#15961 = LINE('',#15962,#15963);+#15962 = CARTESIAN_POINT('',(-0.548953137803,-0.299329353611));+#15963 = VECTOR('',#15964,1.);+#15964 = DIRECTION('',(0.,-1.));+#15965 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15966 = PCURVE('',#15967,#15972);+#15967 = PLANE('',#15968);+#15968 = AXIS2_PLACEMENT_3D('',#15969,#15970,#15971);+#15969 = CARTESIAN_POINT('',(-2.724938966801,-0.84,-1.665334536938E-16)+ );+#15970 = DIRECTION('',(0.,0.,1.));+#15971 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#15972 = DEFINITIONAL_REPRESENTATION('',(#15973),#15977);+#15973 = LINE('',#15974,#15975);+#15974 = CARTESIAN_POINT('',(4.69137475541E-18,-0.41));+#15975 = VECTOR('',#15976,1.);+#15976 = DIRECTION('',(1.,0.));+#15977 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15978 = ORIENTED_EDGE('',*,*,#15979,.T.);+#15979 = EDGE_CURVE('',#15952,#15980,#15982,.T.);+#15980 = VERTEX_POINT('',#15981);+#15981 = CARTESIAN_POINT('',(-3.,-0.43,0.2));+#15982 = SURFACE_CURVE('',#15983,(#15987,#15994),.PCURVE_S1.);+#15983 = LINE('',#15984,#15985);+#15984 = CARTESIAN_POINT('',(-3.,-0.43,-1.665334536938E-16));+#15985 = VECTOR('',#15986,1.);+#15986 = DIRECTION('',(0.,0.,1.));+#15987 = PCURVE('',#1924,#15988);+#15988 = DEFINITIONAL_REPRESENTATION('',(#15989),#15993);+#15989 = LINE('',#15990,#15991);+#15990 = CARTESIAN_POINT('',(-0.548953137803,-0.57439038681));+#15991 = VECTOR('',#15992,1.);+#15992 = DIRECTION('',(1.,0.));+#15993 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15994 = PCURVE('',#15995,#16000);+#15995 = PLANE('',#15996);+#15996 = AXIS2_PLACEMENT_3D('',#15997,#15998,#15999);+#15997 = CARTESIAN_POINT('',(-3.,-0.84,-1.665334536938E-16));+#15998 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#15999 = DIRECTION('',(0.,0.,1.));+#16000 = DEFINITIONAL_REPRESENTATION('',(#16001),#16005);+#16001 = LINE('',#16002,#16003);+#16002 = CARTESIAN_POINT('',(0.,-0.41));+#16003 = VECTOR('',#16004,1.);+#16004 = DIRECTION('',(1.,0.));+#16005 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16006 = ORIENTED_EDGE('',*,*,#16007,.T.);+#16007 = EDGE_CURVE('',#15980,#16008,#16010,.T.);+#16008 = VERTEX_POINT('',#16009);+#16009 = CARTESIAN_POINT('',(-2.724938966801,-0.43,0.2));+#16010 = SURFACE_CURVE('',#16011,(#16015,#16022),.PCURVE_S1.);+#16011 = LINE('',#16012,#16013);+#16012 = CARTESIAN_POINT('',(-3.,-0.43,0.2));+#16013 = VECTOR('',#16014,1.);+#16014 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#16015 = PCURVE('',#1924,#16016);+#16016 = DEFINITIONAL_REPRESENTATION('',(#16017),#16021);+#16017 = LINE('',#16018,#16019);+#16018 = CARTESIAN_POINT('',(-0.348953137803,-0.57439038681));+#16019 = VECTOR('',#16020,1.);+#16020 = DIRECTION('',(0.,1.));+#16021 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16022 = PCURVE('',#16023,#16028);+#16023 = PLANE('',#16024);+#16024 = AXIS2_PLACEMENT_3D('',#16025,#16026,#16027);+#16025 = CARTESIAN_POINT('',(-3.,-0.84,0.2));+#16026 = DIRECTION('',(0.,0.,-1.));+#16027 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#16028 = DEFINITIONAL_REPRESENTATION('',(#16029),#16033);+#16029 = LINE('',#16030,#16031);+#16030 = CARTESIAN_POINT('',(-4.69137475541E-18,-0.41));+#16031 = VECTOR('',#16032,1.);+#16032 = DIRECTION('',(1.,0.));+#16033 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16034 = ORIENTED_EDGE('',*,*,#16035,.T.);+#16035 = EDGE_CURVE('',#16008,#16036,#16038,.T.);+#16036 = VERTEX_POINT('',#16037);+#16037 = CARTESIAN_POINT('',(-2.6264581915,-0.43,0.282635182233));+#16038 = SURFACE_CURVE('',#16039,(#16044,#16055),.PCURVE_S1.);+#16039 = CIRCLE('',#16040,0.1);+#16040 = AXIS2_PLACEMENT_3D('',#16041,#16042,#16043);+#16041 = CARTESIAN_POINT('',(-2.724938966801,-0.43,0.3));+#16042 = DIRECTION('',(-1.144237745222E-17,-1.,-0.));+#16043 = DIRECTION('',(0.,0.,-1.));+#16044 = PCURVE('',#1924,#16045);+#16045 = DEFINITIONAL_REPRESENTATION('',(#16046),#16054);+#16046 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#16047,#16048,#16049,#16050+ ,#16051,#16052,#16053),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#16047 = CARTESIAN_POINT('',(-0.348953137803,-0.299329353611));+#16048 = CARTESIAN_POINT('',(-0.348953137803,-0.126124272854));+#16049 = CARTESIAN_POINT('',(-0.198953137803,-0.212726813233));+#16050 = CARTESIAN_POINT('',(-4.8953137803E-02,-0.299329353611));+#16051 = CARTESIAN_POINT('',(-0.198953137803,-0.385931893989));+#16052 = CARTESIAN_POINT('',(-0.348953137803,-0.472534434368));+#16053 = CARTESIAN_POINT('',(-0.348953137803,-0.299329353611));+#16054 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16055 = PCURVE('',#16056,#16061);+#16056 = CYLINDRICAL_SURFACE('',#16057,0.1);+#16057 = AXIS2_PLACEMENT_3D('',#16058,#16059,#16060);+#16058 = CARTESIAN_POINT('',(-2.724938966801,-0.84,0.3));+#16059 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#16060 = DIRECTION('',(-0.,0.,-1.));+#16061 = DEFINITIONAL_REPRESENTATION('',(#16062),#16066);+#16062 = LINE('',#16063,#16064);+#16063 = CARTESIAN_POINT('',(0.,-0.41));+#16064 = VECTOR('',#16065,1.);+#16065 = DIRECTION('',(1.,0.));+#16066 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16067 = ORIENTED_EDGE('',*,*,#16068,.T.);+#16068 = EDGE_CURVE('',#16036,#16069,#16071,.T.);+#16069 = VERTEX_POINT('',#16070);+#16070 = CARTESIAN_POINT('',(-2.545442325904,-0.43,0.7770944533));+#16071 = SURFACE_CURVE('',#16072,(#16076,#16083),.PCURVE_S1.);+#16072 = LINE('',#16073,#16074);+#16073 = CARTESIAN_POINT('',(-2.6264581915,-0.43,0.282635182233));+#16074 = VECTOR('',#16075,1.);+#16075 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087)+ );+#16076 = PCURVE('',#1924,#16077);+#16077 = DEFINITIONAL_REPRESENTATION('',(#16078),#16082);+#16078 = LINE('',#16079,#16080);+#16079 = CARTESIAN_POINT('',(-0.26631795557,-0.20084857831));+#16080 = VECTOR('',#16081,1.);+#16081 = DIRECTION('',(0.986841372087,0.161691392282));+#16082 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16083 = PCURVE('',#16084,#16089);+#16084 = PLANE('',#16085);+#16085 = AXIS2_PLACEMENT_3D('',#16086,#16087,#16088);+#16086 = CARTESIAN_POINT('',(-2.6264581915,-0.84,0.282635182233));+#16087 = DIRECTION('',(0.986841372087,-1.129181146488E-17,+ -0.161691392282));+#16088 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087)+ );+#16089 = DEFINITIONAL_REPRESENTATION('',(#16090),#16094);+#16090 = LINE('',#16091,#16092);+#16091 = CARTESIAN_POINT('',(-7.585549159209E-19,-0.41));+#16092 = VECTOR('',#16093,1.);+#16093 = DIRECTION('',(1.,-5.984962792299E-34));+#16094 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16095 = ORIENTED_EDGE('',*,*,#16096,.T.);+#16096 = EDGE_CURVE('',#16069,#1881,#16097,.T.);+#16097 = SURFACE_CURVE('',#16098,(#16103,#16110),.PCURVE_S1.);+#16098 = CIRCLE('',#16099,0.3);+#16099 = AXIS2_PLACEMENT_3D('',#16100,#16101,#16102);+#16100 = CARTESIAN_POINT('',(-2.25,-0.43,0.725));+#16101 = DIRECTION('',(1.144237745222E-17,1.,7.703719777549E-34));+#16102 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667+ ));+#16103 = PCURVE('',#1924,#16104);+#16104 = DEFINITIONAL_REPRESENTATION('',(#16105),#16109);+#16105 = CIRCLE('',#16106,0.3);+#16106 = AXIS2_PLACEMENT_2D('',#16107,#16108);+#16107 = CARTESIAN_POINT('',(0.176046862197,0.17560961319));+#16108 = DIRECTION('',(0.173648177667,-0.984807753012));+#16109 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16110 = PCURVE('',#1896,#16111);+#16111 = DEFINITIONAL_REPRESENTATION('',(#16112),#16116);+#16112 = LINE('',#16113,#16114);+#16113 = CARTESIAN_POINT('',(6.28318530718,-0.41));+#16114 = VECTOR('',#16115,1.);+#16115 = DIRECTION('',(-1.,-3.97569335183E-17));+#16116 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16117 = ORIENTED_EDGE('',*,*,#1908,.T.);+#16118 = ADVANCED_FACE('',(#16119),#16084,.F.);+#16119 = FACE_BOUND('',#16120,.F.);+#16120 = EDGE_LOOP('',(#16121,#16144,#16145,#16168));+#16121 = ORIENTED_EDGE('',*,*,#16122,.T.);+#16122 = EDGE_CURVE('',#16123,#16036,#16125,.T.);+#16123 = VERTEX_POINT('',#16124);+#16124 = CARTESIAN_POINT('',(-2.6264581915,-0.84,0.282635182233));+#16125 = SURFACE_CURVE('',#16126,(#16130,#16137),.PCURVE_S1.);+#16126 = LINE('',#16127,#16128);+#16127 = CARTESIAN_POINT('',(-2.6264581915,-0.84,0.282635182233));+#16128 = VECTOR('',#16129,1.);+#16129 = DIRECTION('',(1.144237745222E-17,1.,0.));+#16130 = PCURVE('',#16084,#16131);+#16131 = DEFINITIONAL_REPRESENTATION('',(#16132),#16136);+#16132 = LINE('',#16133,#16134);+#16133 = CARTESIAN_POINT('',(0.,-0.));+#16134 = VECTOR('',#16135,1.);+#16135 = DIRECTION('',(-5.385465771581E-30,-1.));+#16136 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16137 = PCURVE('',#16056,#16138);+#16138 = DEFINITIONAL_REPRESENTATION('',(#16139),#16143);+#16139 = LINE('',#16140,#16141);+#16140 = CARTESIAN_POINT('',(1.396263401592,0.));+#16141 = VECTOR('',#16142,1.);+#16142 = DIRECTION('',(0.,-1.));+#16143 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16144 = ORIENTED_EDGE('',*,*,#16068,.T.);+#16145 = ORIENTED_EDGE('',*,*,#16146,.F.);+#16146 = EDGE_CURVE('',#16147,#16069,#16149,.T.);+#16147 = VERTEX_POINT('',#16148);+#16148 = CARTESIAN_POINT('',(-2.545442325904,-0.84,0.7770944533));+#16149 = SURFACE_CURVE('',#16150,(#16154,#16161),.PCURVE_S1.);+#16150 = LINE('',#16151,#16152);+#16151 = CARTESIAN_POINT('',(-2.545442325904,-0.84,0.7770944533));+#16152 = VECTOR('',#16153,1.);+#16153 = DIRECTION('',(1.144237745222E-17,1.,0.));+#16154 = PCURVE('',#16084,#16155);+#16155 = DEFINITIONAL_REPRESENTATION('',(#16156),#16160);+#16156 = LINE('',#16157,#16158);+#16157 = CARTESIAN_POINT('',(0.501052433606,-9.270141137704E-19));+#16158 = VECTOR('',#16159,1.);+#16159 = DIRECTION('',(-5.385465771581E-30,-1.));+#16160 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16161 = PCURVE('',#1896,#16162);+#16162 = DEFINITIONAL_REPRESENTATION('',(#16163),#16167);+#16163 = LINE('',#16164,#16165);+#16164 = CARTESIAN_POINT('',(6.28318530718,0.));+#16165 = VECTOR('',#16166,1.);+#16166 = DIRECTION('',(0.,-1.));+#16167 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16168 = ORIENTED_EDGE('',*,*,#16169,.F.);+#16169 = EDGE_CURVE('',#16123,#16147,#16170,.T.);+#16170 = SURFACE_CURVE('',#16171,(#16175,#16182),.PCURVE_S1.);+#16171 = LINE('',#16172,#16173);+#16172 = CARTESIAN_POINT('',(-2.6264581915,-0.84,0.282635182233));+#16173 = VECTOR('',#16174,1.);+#16174 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087)+ );+#16175 = PCURVE('',#16084,#16176);+#16176 = DEFINITIONAL_REPRESENTATION('',(#16177),#16181);+#16177 = LINE('',#16178,#16179);+#16178 = CARTESIAN_POINT('',(0.,-0.));+#16179 = VECTOR('',#16180,1.);+#16180 = DIRECTION('',(1.,-5.984962792299E-34));+#16181 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16182 = PCURVE('',#1868,#16183);+#16183 = DEFINITIONAL_REPRESENTATION('',(#16184),#16188);+#16184 = LINE('',#16185,#16186);+#16185 = CARTESIAN_POINT('',(-0.26631795557,-0.20084857831));+#16186 = VECTOR('',#16187,1.);+#16187 = DIRECTION('',(0.986841372087,0.161691392282));+#16188 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16189 = ADVANCED_FACE('',(#16190),#16056,.F.);+#16190 = FACE_BOUND('',#16191,.F.);+#16191 = EDGE_LOOP('',(#16192,#16215,#16216,#16217));+#16192 = ORIENTED_EDGE('',*,*,#16193,.T.);+#16193 = EDGE_CURVE('',#16194,#16008,#16196,.T.);+#16194 = VERTEX_POINT('',#16195);+#16195 = CARTESIAN_POINT('',(-2.724938966801,-0.84,0.2));+#16196 = SURFACE_CURVE('',#16197,(#16201,#16208),.PCURVE_S1.);+#16197 = LINE('',#16198,#16199);+#16198 = CARTESIAN_POINT('',(-2.724938966801,-0.84,0.2));+#16199 = VECTOR('',#16200,1.);+#16200 = DIRECTION('',(1.144237745222E-17,1.,0.));+#16201 = PCURVE('',#16056,#16202);+#16202 = DEFINITIONAL_REPRESENTATION('',(#16203),#16207);+#16203 = LINE('',#16204,#16205);+#16204 = CARTESIAN_POINT('',(0.,0.));+#16205 = VECTOR('',#16206,1.);+#16206 = DIRECTION('',(0.,-1.));+#16207 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16208 = PCURVE('',#16023,#16209);+#16209 = DEFINITIONAL_REPRESENTATION('',(#16210),#16214);+#16210 = LINE('',#16211,#16212);+#16211 = CARTESIAN_POINT('',(0.275061033199,-3.147352164261E-18));+#16212 = VECTOR('',#16213,1.);+#16213 = DIRECTION('',(0.,-1.));+#16214 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16215 = ORIENTED_EDGE('',*,*,#16035,.T.);+#16216 = ORIENTED_EDGE('',*,*,#16122,.F.);+#16217 = ORIENTED_EDGE('',*,*,#16218,.F.);+#16218 = EDGE_CURVE('',#16194,#16123,#16219,.T.);+#16219 = SURFACE_CURVE('',#16220,(#16225,#16232),.PCURVE_S1.);+#16220 = CIRCLE('',#16221,0.1);+#16221 = AXIS2_PLACEMENT_3D('',#16222,#16223,#16224);+#16222 = CARTESIAN_POINT('',(-2.724938966801,-0.84,0.3));+#16223 = DIRECTION('',(-1.144237745222E-17,-1.,-0.));+#16224 = DIRECTION('',(0.,0.,-1.));+#16225 = PCURVE('',#16056,#16226);+#16226 = DEFINITIONAL_REPRESENTATION('',(#16227),#16231);+#16227 = LINE('',#16228,#16229);+#16228 = CARTESIAN_POINT('',(0.,0.));+#16229 = VECTOR('',#16230,1.);+#16230 = DIRECTION('',(1.,0.));+#16231 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16232 = PCURVE('',#1868,#16233);+#16233 = DEFINITIONAL_REPRESENTATION('',(#16234),#16242);+#16234 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#16235,#16236,#16237,#16238+ ,#16239,#16240,#16241),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#16235 = CARTESIAN_POINT('',(-0.348953137803,-0.299329353611));+#16236 = CARTESIAN_POINT('',(-0.348953137803,-0.126124272854));+#16237 = CARTESIAN_POINT('',(-0.198953137803,-0.212726813233));+#16238 = CARTESIAN_POINT('',(-4.8953137803E-02,-0.299329353611));+#16239 = CARTESIAN_POINT('',(-0.198953137803,-0.385931893989));+#16240 = CARTESIAN_POINT('',(-0.348953137803,-0.472534434368));+#16241 = CARTESIAN_POINT('',(-0.348953137803,-0.299329353611));+#16242 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16243 = ADVANCED_FACE('',(#16244),#16023,.F.);+#16244 = FACE_BOUND('',#16245,.F.);+#16245 = EDGE_LOOP('',(#16246,#16269,#16270,#16271));+#16246 = ORIENTED_EDGE('',*,*,#16247,.T.);+#16247 = EDGE_CURVE('',#16248,#15980,#16250,.T.);+#16248 = VERTEX_POINT('',#16249);+#16249 = CARTESIAN_POINT('',(-3.,-0.84,0.2));+#16250 = SURFACE_CURVE('',#16251,(#16255,#16262),.PCURVE_S1.);+#16251 = LINE('',#16252,#16253);+#16252 = CARTESIAN_POINT('',(-3.,-0.84,0.2));+#16253 = VECTOR('',#16254,1.);+#16254 = DIRECTION('',(1.144237745222E-17,1.,0.));+#16255 = PCURVE('',#16023,#16256);+#16256 = DEFINITIONAL_REPRESENTATION('',(#16257),#16261);+#16257 = LINE('',#16258,#16259);+#16258 = CARTESIAN_POINT('',(0.,-0.));+#16259 = VECTOR('',#16260,1.);+#16260 = DIRECTION('',(0.,-1.));+#16261 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16262 = PCURVE('',#15995,#16263);+#16263 = DEFINITIONAL_REPRESENTATION('',(#16264),#16268);+#16264 = LINE('',#16265,#16266);+#16265 = CARTESIAN_POINT('',(0.2,0.));+#16266 = VECTOR('',#16267,1.);+#16267 = DIRECTION('',(0.,-1.));+#16268 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16269 = ORIENTED_EDGE('',*,*,#16007,.T.);+#16270 = ORIENTED_EDGE('',*,*,#16193,.F.);+#16271 = ORIENTED_EDGE('',*,*,#16272,.F.);+#16272 = EDGE_CURVE('',#16248,#16194,#16273,.T.);+#16273 = SURFACE_CURVE('',#16274,(#16278,#16285),.PCURVE_S1.);+#16274 = LINE('',#16275,#16276);+#16275 = CARTESIAN_POINT('',(-3.,-0.84,0.2));+#16276 = VECTOR('',#16277,1.);+#16277 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#16278 = PCURVE('',#16023,#16279);+#16279 = DEFINITIONAL_REPRESENTATION('',(#16280),#16284);+#16280 = LINE('',#16281,#16282);+#16281 = CARTESIAN_POINT('',(0.,-0.));+#16282 = VECTOR('',#16283,1.);+#16283 = DIRECTION('',(1.,0.));+#16284 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16285 = PCURVE('',#1868,#16286);+#16286 = DEFINITIONAL_REPRESENTATION('',(#16287),#16291);+#16287 = LINE('',#16288,#16289);+#16288 = CARTESIAN_POINT('',(-0.348953137803,-0.57439038681));+#16289 = VECTOR('',#16290,1.);+#16290 = DIRECTION('',(0.,1.));+#16291 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16292 = ADVANCED_FACE('',(#16293),#15995,.F.);+#16293 = FACE_BOUND('',#16294,.F.);+#16294 = EDGE_LOOP('',(#16295,#16318,#16319,#16320));+#16295 = ORIENTED_EDGE('',*,*,#16296,.T.);+#16296 = EDGE_CURVE('',#16297,#15952,#16299,.T.);+#16297 = VERTEX_POINT('',#16298);+#16298 = CARTESIAN_POINT('',(-3.,-0.84,-1.665334536938E-16));+#16299 = SURFACE_CURVE('',#16300,(#16304,#16311),.PCURVE_S1.);+#16300 = LINE('',#16301,#16302);+#16301 = CARTESIAN_POINT('',(-3.,-0.84,-1.665334536938E-16));+#16302 = VECTOR('',#16303,1.);+#16303 = DIRECTION('',(1.144237745222E-17,1.,0.));+#16304 = PCURVE('',#15995,#16305);+#16305 = DEFINITIONAL_REPRESENTATION('',(#16306),#16310);+#16306 = LINE('',#16307,#16308);+#16307 = CARTESIAN_POINT('',(0.,0.));+#16308 = VECTOR('',#16309,1.);+#16309 = DIRECTION('',(0.,-1.));+#16310 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16311 = PCURVE('',#15967,#16312);+#16312 = DEFINITIONAL_REPRESENTATION('',(#16313),#16317);+#16313 = LINE('',#16314,#16315);+#16314 = CARTESIAN_POINT('',(0.275061033199,3.147352164261E-18));+#16315 = VECTOR('',#16316,1.);+#16316 = DIRECTION('',(0.,-1.));+#16317 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16318 = ORIENTED_EDGE('',*,*,#15979,.T.);+#16319 = ORIENTED_EDGE('',*,*,#16247,.F.);+#16320 = ORIENTED_EDGE('',*,*,#16321,.F.);+#16321 = EDGE_CURVE('',#16297,#16248,#16322,.T.);+#16322 = SURFACE_CURVE('',#16323,(#16327,#16334),.PCURVE_S1.);+#16323 = LINE('',#16324,#16325);+#16324 = CARTESIAN_POINT('',(-3.,-0.84,-1.665334536938E-16));+#16325 = VECTOR('',#16326,1.);+#16326 = DIRECTION('',(0.,0.,1.));+#16327 = PCURVE('',#15995,#16328);+#16328 = DEFINITIONAL_REPRESENTATION('',(#16329),#16333);+#16329 = LINE('',#16330,#16331);+#16330 = CARTESIAN_POINT('',(0.,0.));+#16331 = VECTOR('',#16332,1.);+#16332 = DIRECTION('',(1.,0.));+#16333 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16334 = PCURVE('',#1868,#16335);+#16335 = DEFINITIONAL_REPRESENTATION('',(#16336),#16340);+#16336 = LINE('',#16337,#16338);+#16337 = CARTESIAN_POINT('',(-0.548953137803,-0.57439038681));+#16338 = VECTOR('',#16339,1.);+#16339 = DIRECTION('',(1.,0.));+#16340 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16341 = ADVANCED_FACE('',(#16342),#15967,.F.);+#16342 = FACE_BOUND('',#16343,.F.);+#16343 = EDGE_LOOP('',(#16344,#16367,#16368,#16369));+#16344 = ORIENTED_EDGE('',*,*,#16345,.T.);+#16345 = EDGE_CURVE('',#16346,#15923,#16348,.T.);+#16346 = VERTEX_POINT('',#16347);+#16347 = CARTESIAN_POINT('',(-2.724938966801,-0.84,-1.665334536938E-16)+ );+#16348 = SURFACE_CURVE('',#16349,(#16353,#16360),.PCURVE_S1.);+#16349 = LINE('',#16350,#16351);+#16350 = CARTESIAN_POINT('',(-2.724938966801,-0.84,-1.665334536938E-16)+ );+#16351 = VECTOR('',#16352,1.);+#16352 = DIRECTION('',(1.144237745222E-17,1.,0.));+#16353 = PCURVE('',#15967,#16354);+#16354 = DEFINITIONAL_REPRESENTATION('',(#16355),#16359);+#16355 = LINE('',#16356,#16357);+#16356 = CARTESIAN_POINT('',(0.,0.));+#16357 = VECTOR('',#16358,1.);+#16358 = DIRECTION('',(0.,-1.));+#16359 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16360 = PCURVE('',#15939,#16361);+#16361 = DEFINITIONAL_REPRESENTATION('',(#16362),#16366);+#16362 = LINE('',#16363,#16364);+#16363 = CARTESIAN_POINT('',(4.886921905584,0.));+#16364 = VECTOR('',#16365,1.);+#16365 = DIRECTION('',(0.,-1.));+#16366 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16367 = ORIENTED_EDGE('',*,*,#15951,.T.);+#16368 = ORIENTED_EDGE('',*,*,#16296,.F.);+#16369 = ORIENTED_EDGE('',*,*,#16370,.F.);+#16370 = EDGE_CURVE('',#16346,#16297,#16371,.T.);+#16371 = SURFACE_CURVE('',#16372,(#16376,#16383),.PCURVE_S1.);+#16372 = LINE('',#16373,#16374);+#16373 = CARTESIAN_POINT('',(-2.724938966801,-0.84,-1.665334536938E-16)+ );+#16374 = VECTOR('',#16375,1.);+#16375 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#16376 = PCURVE('',#15967,#16377);+#16377 = DEFINITIONAL_REPRESENTATION('',(#16378),#16382);+#16378 = LINE('',#16379,#16380);+#16379 = CARTESIAN_POINT('',(0.,0.));+#16380 = VECTOR('',#16381,1.);+#16381 = DIRECTION('',(1.,0.));+#16382 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16383 = PCURVE('',#1868,#16384);+#16384 = DEFINITIONAL_REPRESENTATION('',(#16385),#16389);+#16385 = LINE('',#16386,#16387);+#16386 = CARTESIAN_POINT('',(-0.548953137803,-0.299329353611));+#16387 = VECTOR('',#16388,1.);+#16388 = DIRECTION('',(0.,-1.));+#16389 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16390 = ADVANCED_FACE('',(#16391),#15939,.T.);+#16391 = FACE_BOUND('',#16392,.T.);+#16392 = EDGE_LOOP('',(#16393,#16417,#16418,#16419));+#16393 = ORIENTED_EDGE('',*,*,#16394,.T.);+#16394 = EDGE_CURVE('',#16395,#16346,#16397,.T.);+#16395 = VERTEX_POINT('',#16396);+#16396 = CARTESIAN_POINT('',(-2.429496640897,-0.84,0.2479055467));+#16397 = SURFACE_CURVE('',#16398,(#16403,#16410),.PCURVE_S1.);+#16398 = CIRCLE('',#16399,0.3);+#16399 = AXIS2_PLACEMENT_3D('',#16400,#16401,#16402);+#16400 = CARTESIAN_POINT('',(-2.724938966801,-0.84,0.3));+#16401 = DIRECTION('',(1.144237745222E-17,1.,7.703719777549E-34));+#16402 = DIRECTION('',(0.984807753012,-1.126854202784E-17,+ -0.173648177667));+#16403 = PCURVE('',#15939,#16404);+#16404 = DEFINITIONAL_REPRESENTATION('',(#16405),#16409);+#16405 = LINE('',#16406,#16407);+#16406 = CARTESIAN_POINT('',(6.28318530718,0.));+#16407 = VECTOR('',#16408,1.);+#16408 = DIRECTION('',(-1.,0.));+#16409 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16410 = PCURVE('',#1868,#16411);+#16411 = DEFINITIONAL_REPRESENTATION('',(#16412),#16416);+#16412 = CIRCLE('',#16413,0.3);+#16413 = AXIS2_PLACEMENT_2D('',#16414,#16415);+#16414 = CARTESIAN_POINT('',(-0.248953137803,-0.299329353611));+#16415 = DIRECTION('',(-0.173648177667,0.984807753012));+#16416 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16417 = ORIENTED_EDGE('',*,*,#16345,.T.);+#16418 = ORIENTED_EDGE('',*,*,#15922,.F.);+#16419 = ORIENTED_EDGE('',*,*,#16420,.F.);+#16420 = EDGE_CURVE('',#16395,#15895,#16421,.T.);+#16421 = SURFACE_CURVE('',#16422,(#16426,#16433),.PCURVE_S1.);+#16422 = LINE('',#16423,#16424);+#16423 = CARTESIAN_POINT('',(-2.429496640897,-0.84,0.2479055467));+#16424 = VECTOR('',#16425,1.);+#16425 = DIRECTION('',(1.144237745222E-17,1.,0.));+#16426 = PCURVE('',#15939,#16427);+#16427 = DEFINITIONAL_REPRESENTATION('',(#16428),#16432);+#16428 = LINE('',#16429,#16430);+#16429 = CARTESIAN_POINT('',(6.28318530718,0.));+#16430 = VECTOR('',#16431,1.);+#16431 = DIRECTION('',(0.,-1.));+#16432 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16433 = PCURVE('',#15910,#16434);+#16434 = DEFINITIONAL_REPRESENTATION('',(#16435),#16439);+#16435 = LINE('',#16436,#16437);+#16436 = CARTESIAN_POINT('',(0.501052433606,9.270141137704E-19));+#16437 = VECTOR('',#16438,1.);+#16438 = DIRECTION('',(5.385465771581E-30,-1.));+#16439 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16440 = ADVANCED_FACE('',(#16441),#15910,.F.);+#16441 = FACE_BOUND('',#16442,.F.);+#16442 = EDGE_LOOP('',(#16443,#16466,#16467,#16468));+#16443 = ORIENTED_EDGE('',*,*,#16444,.T.);+#16444 = EDGE_CURVE('',#16445,#15862,#16447,.T.);+#16445 = VERTEX_POINT('',#16446);+#16446 = CARTESIAN_POINT('',(-2.348480775301,-0.84,0.742364817767));+#16447 = SURFACE_CURVE('',#16448,(#16452,#16459),.PCURVE_S1.);+#16448 = LINE('',#16449,#16450);+#16449 = CARTESIAN_POINT('',(-2.348480775301,-0.84,0.742364817767));+#16450 = VECTOR('',#16451,1.);+#16451 = DIRECTION('',(1.144237745222E-17,1.,0.));+#16452 = PCURVE('',#15910,#16453);+#16453 = DEFINITIONAL_REPRESENTATION('',(#16454),#16458);+#16454 = LINE('',#16455,#16456);+#16455 = CARTESIAN_POINT('',(0.,-0.));+#16456 = VECTOR('',#16457,1.);+#16457 = DIRECTION('',(5.385465771581E-30,-1.));+#16458 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16459 = PCURVE('',#15882,#16460);+#16460 = DEFINITIONAL_REPRESENTATION('',(#16461),#16465);+#16461 = LINE('',#16462,#16463);+#16462 = CARTESIAN_POINT('',(1.396263401592,0.));+#16463 = VECTOR('',#16464,1.);+#16464 = DIRECTION('',(0.,-1.));+#16465 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16466 = ORIENTED_EDGE('',*,*,#15894,.T.);+#16467 = ORIENTED_EDGE('',*,*,#16420,.F.);+#16468 = ORIENTED_EDGE('',*,*,#16469,.F.);+#16469 = EDGE_CURVE('',#16445,#16395,#16470,.T.);+#16470 = SURFACE_CURVE('',#16471,(#16475,#16482),.PCURVE_S1.);+#16471 = LINE('',#16472,#16473);+#16472 = CARTESIAN_POINT('',(-2.348480775301,-0.84,0.742364817767));+#16473 = VECTOR('',#16474,1.);+#16474 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087+ ));+#16475 = PCURVE('',#15910,#16476);+#16476 = DEFINITIONAL_REPRESENTATION('',(#16477),#16481);+#16477 = LINE('',#16478,#16479);+#16478 = CARTESIAN_POINT('',(0.,-0.));+#16479 = VECTOR('',#16480,1.);+#16480 = DIRECTION('',(1.,5.984962792299E-34));+#16481 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16482 = PCURVE('',#1868,#16483);+#16483 = DEFINITIONAL_REPRESENTATION('',(#16484),#16488);+#16484 = LINE('',#16485,#16486);+#16485 = CARTESIAN_POINT('',(0.193411679964,7.7128837889E-02));+#16486 = VECTOR('',#16487,1.);+#16487 = DIRECTION('',(-0.986841372087,-0.161691392282));+#16488 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16489 = ADVANCED_FACE('',(#16490),#15882,.F.);+#16490 = FACE_BOUND('',#16491,.F.);+#16491 = EDGE_LOOP('',(#16492,#16515,#16516,#16517));+#16492 = ORIENTED_EDGE('',*,*,#16493,.T.);+#16493 = EDGE_CURVE('',#16494,#15839,#16496,.T.);+#16494 = VERTEX_POINT('',#16495);+#16495 = CARTESIAN_POINT('',(-2.25,-0.84,0.825));+#16496 = SURFACE_CURVE('',#16497,(#16501,#16508),.PCURVE_S1.);+#16497 = LINE('',#16498,#16499);+#16498 = CARTESIAN_POINT('',(-2.25,-0.84,0.825));+#16499 = VECTOR('',#16500,1.);+#16500 = DIRECTION('',(1.144237745222E-17,1.,0.));+#16501 = PCURVE('',#15882,#16502);+#16502 = DEFINITIONAL_REPRESENTATION('',(#16503),#16507);+#16503 = LINE('',#16504,#16505);+#16504 = CARTESIAN_POINT('',(0.,0.));+#16505 = VECTOR('',#16506,1.);+#16506 = DIRECTION('',(0.,-1.));+#16507 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16508 = PCURVE('',#418,#16509);+#16509 = DEFINITIONAL_REPRESENTATION('',(#16510),#16514);+#16510 = LINE('',#16511,#16512);+#16511 = CARTESIAN_POINT('',(0.45,5.149069853499E-18));+#16512 = VECTOR('',#16513,1.);+#16513 = DIRECTION('',(0.,-1.));+#16514 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16515 = ORIENTED_EDGE('',*,*,#15861,.T.);+#16516 = ORIENTED_EDGE('',*,*,#16444,.F.);+#16517 = ORIENTED_EDGE('',*,*,#16518,.F.);+#16518 = EDGE_CURVE('',#16494,#16445,#16519,.T.);+#16519 = SURFACE_CURVE('',#16520,(#16525,#16532),.PCURVE_S1.);+#16520 = CIRCLE('',#16521,0.1);+#16521 = AXIS2_PLACEMENT_3D('',#16522,#16523,#16524);+#16522 = CARTESIAN_POINT('',(-2.25,-0.84,0.725));+#16523 = DIRECTION('',(-1.144237745222E-17,-1.,3.284293275761E-47));+#16524 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.));+#16525 = PCURVE('',#15882,#16526);+#16526 = DEFINITIONAL_REPRESENTATION('',(#16527),#16531);+#16527 = LINE('',#16528,#16529);+#16528 = CARTESIAN_POINT('',(0.,0.));+#16529 = VECTOR('',#16530,1.);+#16530 = DIRECTION('',(1.,0.));+#16531 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16532 = PCURVE('',#1868,#16533);+#16533 = DEFINITIONAL_REPRESENTATION('',(#16534),#16542);+#16534 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#16535,#16536,#16537,#16538+ ,#16539,#16540,#16541),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#16535 = CARTESIAN_POINT('',(0.276046862197,0.17560961319));+#16536 = CARTESIAN_POINT('',(0.276046862197,2.404532433112E-03));+#16537 = CARTESIAN_POINT('',(0.126046862197,8.900707281156E-02));+#16538 = CARTESIAN_POINT('',(-2.3953137803E-02,0.17560961319));+#16539 = CARTESIAN_POINT('',(0.126046862197,0.262212153568));+#16540 = CARTESIAN_POINT('',(0.276046862197,0.348814693947));+#16541 = CARTESIAN_POINT('',(0.276046862197,0.17560961319));+#16542 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16543 = ADVANCED_FACE('',(#16544),#1896,.T.);+#16544 = FACE_BOUND('',#16545,.T.);+#16545 = EDGE_LOOP('',(#16546,#16568,#16569,#16570));+#16546 = ORIENTED_EDGE('',*,*,#16547,.T.);+#16547 = EDGE_CURVE('',#16147,#1853,#16548,.T.);+#16548 = SURFACE_CURVE('',#16549,(#16554,#16561),.PCURVE_S1.);+#16549 = CIRCLE('',#16550,0.3);+#16550 = AXIS2_PLACEMENT_3D('',#16551,#16552,#16553);+#16551 = CARTESIAN_POINT('',(-2.25,-0.84,0.725));+#16552 = DIRECTION('',(1.144237745222E-17,1.,7.703719777549E-34));+#16553 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667+ ));+#16554 = PCURVE('',#1896,#16555);+#16555 = DEFINITIONAL_REPRESENTATION('',(#16556),#16560);+#16556 = LINE('',#16557,#16558);+#16557 = CARTESIAN_POINT('',(6.28318530718,0.));+#16558 = VECTOR('',#16559,1.);+#16559 = DIRECTION('',(-1.,0.));+#16560 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16561 = PCURVE('',#1868,#16562);+#16562 = DEFINITIONAL_REPRESENTATION('',(#16563),#16567);+#16563 = CIRCLE('',#16564,0.3);+#16564 = AXIS2_PLACEMENT_2D('',#16565,#16566);+#16565 = CARTESIAN_POINT('',(0.176046862197,0.17560961319));+#16566 = DIRECTION('',(0.173648177667,-0.984807753012));+#16567 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16568 = ORIENTED_EDGE('',*,*,#1880,.T.);+#16569 = ORIENTED_EDGE('',*,*,#16096,.F.);+#16570 = ORIENTED_EDGE('',*,*,#16146,.F.);+#16571 = ADVANCED_FACE('',(#16572),#1868,.F.);+#16572 = FACE_BOUND('',#16573,.F.);+#16573 = EDGE_LOOP('',(#16574,#16595,#16616,#16617,#16618,#16619,#16620,+ #16621,#16622,#16623,#16624,#16625));+#16574 = ORIENTED_EDGE('',*,*,#16575,.F.);+#16575 = EDGE_CURVE('',#403,#1830,#16576,.T.);+#16576 = SURFACE_CURVE('',#16577,(#16581,#16588),.PCURVE_S1.);+#16577 = LINE('',#16578,#16579);+#16578 = CARTESIAN_POINT('',(-1.95,-0.84,0.786976568901));+#16579 = VECTOR('',#16580,1.);+#16580 = DIRECTION('',(0.,0.,1.));+#16581 = PCURVE('',#1868,#16582);+#16582 = DEFINITIONAL_REPRESENTATION('',(#16583),#16587);+#16583 = LINE('',#16584,#16585);+#16584 = CARTESIAN_POINT('',(0.238023431098,0.47560961319));+#16585 = VECTOR('',#16586,1.);+#16586 = DIRECTION('',(1.,0.));+#16587 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16588 = PCURVE('',#446,#16589);+#16589 = DEFINITIONAL_REPRESENTATION('',(#16590),#16594);+#16590 = LINE('',#16591,#16592);+#16591 = CARTESIAN_POINT('',(1.435,-0.238023431099));+#16592 = VECTOR('',#16593,1.);+#16593 = DIRECTION('',(0.,1.));+#16594 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16595 = ORIENTED_EDGE('',*,*,#16596,.T.);+#16596 = EDGE_CURVE('',#403,#16494,#16597,.T.);+#16597 = SURFACE_CURVE('',#16598,(#16602,#16609),.PCURVE_S1.);+#16598 = LINE('',#16599,#16600);+#16599 = CARTESIAN_POINT('',(-1.8,-0.84,0.825));+#16600 = VECTOR('',#16601,1.);+#16601 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#16602 = PCURVE('',#1868,#16603);+#16603 = DEFINITIONAL_REPRESENTATION('',(#16604),#16608);+#16604 = LINE('',#16605,#16606);+#16605 = CARTESIAN_POINT('',(0.276046862197,0.62560961319));+#16606 = VECTOR('',#16607,1.);+#16607 = DIRECTION('',(0.,-1.));+#16608 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16609 = PCURVE('',#418,#16610);+#16610 = DEFINITIONAL_REPRESENTATION('',(#16611),#16615);+#16611 = LINE('',#16612,#16613);+#16612 = CARTESIAN_POINT('',(0.,0.));+#16613 = VECTOR('',#16614,1.);+#16614 = DIRECTION('',(1.,0.));+#16615 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16616 = ORIENTED_EDGE('',*,*,#16518,.T.);+#16617 = ORIENTED_EDGE('',*,*,#16469,.T.);+#16618 = ORIENTED_EDGE('',*,*,#16394,.T.);+#16619 = ORIENTED_EDGE('',*,*,#16370,.T.);+#16620 = ORIENTED_EDGE('',*,*,#16321,.T.);+#16621 = ORIENTED_EDGE('',*,*,#16272,.T.);+#16622 = ORIENTED_EDGE('',*,*,#16218,.T.);+#16623 = ORIENTED_EDGE('',*,*,#16169,.T.);+#16624 = ORIENTED_EDGE('',*,*,#16547,.T.);+#16625 = ORIENTED_EDGE('',*,*,#1852,.T.);+#16626 = ADVANCED_FACE('',(#16627),#1817,.T.);+#16627 = FACE_BOUND('',#16628,.T.);+#16628 = EDGE_LOOP('',(#16629,#16650,#16673,#16706,#16734,#16763,#16791,+ #16819,#16847,#16880,#16908,#16930));+#16629 = ORIENTED_EDGE('',*,*,#16630,.F.);+#16630 = EDGE_CURVE('',#431,#1802,#16631,.T.);+#16631 = SURFACE_CURVE('',#16632,(#16636,#16643),.PCURVE_S1.);+#16632 = LINE('',#16633,#16634);+#16633 = CARTESIAN_POINT('',(-1.95,-1.7,0.786976568901));+#16634 = VECTOR('',#16635,1.);+#16635 = DIRECTION('',(0.,0.,1.));+#16636 = PCURVE('',#1817,#16637);+#16637 = DEFINITIONAL_REPRESENTATION('',(#16638),#16642);+#16638 = LINE('',#16639,#16640);+#16639 = CARTESIAN_POINT('',(0.238023431098,0.47560961319));+#16640 = VECTOR('',#16641,1.);+#16641 = DIRECTION('',(1.,0.));+#16642 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16643 = PCURVE('',#446,#16644);+#16644 = DEFINITIONAL_REPRESENTATION('',(#16645),#16649);+#16645 = LINE('',#16646,#16647);+#16646 = CARTESIAN_POINT('',(0.575,-0.238023431099));+#16647 = VECTOR('',#16648,1.);+#16648 = DIRECTION('',(0.,1.));+#16649 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16650 = ORIENTED_EDGE('',*,*,#16651,.T.);+#16651 = EDGE_CURVE('',#431,#16652,#16654,.T.);+#16652 = VERTEX_POINT('',#16653);+#16653 = CARTESIAN_POINT('',(-2.25,-1.7,0.825));+#16654 = SURFACE_CURVE('',#16655,(#16659,#16666),.PCURVE_S1.);+#16655 = LINE('',#16656,#16657);+#16656 = CARTESIAN_POINT('',(-1.8,-1.7,0.825));+#16657 = VECTOR('',#16658,1.);+#16658 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#16659 = PCURVE('',#1817,#16660);+#16660 = DEFINITIONAL_REPRESENTATION('',(#16661),#16665);+#16661 = LINE('',#16662,#16663);+#16662 = CARTESIAN_POINT('',(0.276046862197,0.62560961319));+#16663 = VECTOR('',#16664,1.);+#16664 = DIRECTION('',(0.,-1.));+#16665 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16666 = PCURVE('',#474,#16667);+#16667 = DEFINITIONAL_REPRESENTATION('',(#16668),#16672);+#16668 = LINE('',#16669,#16670);+#16669 = CARTESIAN_POINT('',(4.69137475541E-18,-0.41));+#16670 = VECTOR('',#16671,1.);+#16671 = DIRECTION('',(1.,0.));+#16672 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16673 = ORIENTED_EDGE('',*,*,#16674,.T.);+#16674 = EDGE_CURVE('',#16652,#16675,#16677,.T.);+#16675 = VERTEX_POINT('',#16676);+#16676 = CARTESIAN_POINT('',(-2.348480775301,-1.7,0.742364817767));+#16677 = SURFACE_CURVE('',#16678,(#16683,#16694),.PCURVE_S1.);+#16678 = CIRCLE('',#16679,0.1);+#16679 = AXIS2_PLACEMENT_3D('',#16680,#16681,#16682);+#16680 = CARTESIAN_POINT('',(-2.25,-1.7,0.725));+#16681 = DIRECTION('',(-1.144237745222E-17,-1.,3.284293275761E-47));+#16682 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.));+#16683 = PCURVE('',#1817,#16684);+#16684 = DEFINITIONAL_REPRESENTATION('',(#16685),#16693);+#16685 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#16686,#16687,#16688,#16689+ ,#16690,#16691,#16692),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#16686 = CARTESIAN_POINT('',(0.276046862197,0.17560961319));+#16687 = CARTESIAN_POINT('',(0.276046862197,2.404532433112E-03));+#16688 = CARTESIAN_POINT('',(0.126046862197,8.900707281156E-02));+#16689 = CARTESIAN_POINT('',(-2.3953137803E-02,0.17560961319));+#16690 = CARTESIAN_POINT('',(0.126046862197,0.262212153568));+#16691 = CARTESIAN_POINT('',(0.276046862197,0.348814693947));+#16692 = CARTESIAN_POINT('',(0.276046862197,0.17560961319));+#16693 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16694 = PCURVE('',#16695,#16700);+#16695 = CYLINDRICAL_SURFACE('',#16696,0.1);+#16696 = AXIS2_PLACEMENT_3D('',#16697,#16698,#16699);+#16697 = CARTESIAN_POINT('',(-2.25,-2.11,0.725));+#16698 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#16699 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.));+#16700 = DEFINITIONAL_REPRESENTATION('',(#16701),#16705);+#16701 = LINE('',#16702,#16703);+#16702 = CARTESIAN_POINT('',(0.,-0.41));+#16703 = VECTOR('',#16704,1.);+#16704 = DIRECTION('',(1.,0.));+#16705 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16706 = ORIENTED_EDGE('',*,*,#16707,.T.);+#16707 = EDGE_CURVE('',#16675,#16708,#16710,.T.);+#16708 = VERTEX_POINT('',#16709);+#16709 = CARTESIAN_POINT('',(-2.429496640897,-1.7,0.2479055467));+#16710 = SURFACE_CURVE('',#16711,(#16715,#16722),.PCURVE_S1.);+#16711 = LINE('',#16712,#16713);+#16712 = CARTESIAN_POINT('',(-2.348480775301,-1.7,0.742364817767));+#16713 = VECTOR('',#16714,1.);+#16714 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087+ ));+#16715 = PCURVE('',#1817,#16716);+#16716 = DEFINITIONAL_REPRESENTATION('',(#16717),#16721);+#16717 = LINE('',#16718,#16719);+#16718 = CARTESIAN_POINT('',(0.193411679964,7.7128837889E-02));+#16719 = VECTOR('',#16720,1.);+#16720 = DIRECTION('',(-0.986841372087,-0.161691392282));+#16721 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16722 = PCURVE('',#16723,#16728);+#16723 = PLANE('',#16724);+#16724 = AXIS2_PLACEMENT_3D('',#16725,#16726,#16727);+#16725 = CARTESIAN_POINT('',(-2.348480775301,-2.11,0.742364817767));+#16726 = DIRECTION('',(-0.986841372087,1.129181146488E-17,0.161691392282+ ));+#16727 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087+ ));+#16728 = DEFINITIONAL_REPRESENTATION('',(#16729),#16733);+#16729 = LINE('',#16730,#16731);+#16730 = CARTESIAN_POINT('',(7.585549159209E-19,-0.41));+#16731 = VECTOR('',#16732,1.);+#16732 = DIRECTION('',(1.,5.984962792299E-34));+#16733 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16734 = ORIENTED_EDGE('',*,*,#16735,.T.);+#16735 = EDGE_CURVE('',#16708,#16736,#16738,.T.);+#16736 = VERTEX_POINT('',#16737);+#16737 = CARTESIAN_POINT('',(-2.724938966801,-1.7,-1.665334536938E-16));+#16738 = SURFACE_CURVE('',#16739,(#16744,#16751),.PCURVE_S1.);+#16739 = CIRCLE('',#16740,0.3);+#16740 = AXIS2_PLACEMENT_3D('',#16741,#16742,#16743);+#16741 = CARTESIAN_POINT('',(-2.724938966801,-1.7,0.3));+#16742 = DIRECTION('',(1.144237745222E-17,1.,7.703719777549E-34));+#16743 = DIRECTION('',(0.984807753012,-1.126854202784E-17,+ -0.173648177667));+#16744 = PCURVE('',#1817,#16745);+#16745 = DEFINITIONAL_REPRESENTATION('',(#16746),#16750);+#16746 = CIRCLE('',#16747,0.3);+#16747 = AXIS2_PLACEMENT_2D('',#16748,#16749);+#16748 = CARTESIAN_POINT('',(-0.248953137803,-0.299329353611));+#16749 = DIRECTION('',(-0.173648177667,0.984807753012));+#16750 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16751 = PCURVE('',#16752,#16757);+#16752 = CYLINDRICAL_SURFACE('',#16753,0.3);+#16753 = AXIS2_PLACEMENT_3D('',#16754,#16755,#16756);+#16754 = CARTESIAN_POINT('',(-2.724938966801,-2.11,0.3));+#16755 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#16756 = DIRECTION('',(0.984807753012,-1.126854202784E-17,+ -0.173648177667));+#16757 = DEFINITIONAL_REPRESENTATION('',(#16758),#16762);+#16758 = LINE('',#16759,#16760);+#16759 = CARTESIAN_POINT('',(6.28318530718,-0.41));+#16760 = VECTOR('',#16761,1.);+#16761 = DIRECTION('',(-1.,0.));+#16762 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16763 = ORIENTED_EDGE('',*,*,#16764,.T.);+#16764 = EDGE_CURVE('',#16736,#16765,#16767,.T.);+#16765 = VERTEX_POINT('',#16766);+#16766 = CARTESIAN_POINT('',(-3.,-1.7,-1.665334536938E-16));+#16767 = SURFACE_CURVE('',#16768,(#16772,#16779),.PCURVE_S1.);+#16768 = LINE('',#16769,#16770);+#16769 = CARTESIAN_POINT('',(-2.724938966801,-1.7,-1.665334536938E-16));+#16770 = VECTOR('',#16771,1.);+#16771 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#16772 = PCURVE('',#1817,#16773);+#16773 = DEFINITIONAL_REPRESENTATION('',(#16774),#16778);+#16774 = LINE('',#16775,#16776);+#16775 = CARTESIAN_POINT('',(-0.548953137803,-0.299329353611));+#16776 = VECTOR('',#16777,1.);+#16777 = DIRECTION('',(0.,-1.));+#16778 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16779 = PCURVE('',#16780,#16785);+#16780 = PLANE('',#16781);+#16781 = AXIS2_PLACEMENT_3D('',#16782,#16783,#16784);+#16782 = CARTESIAN_POINT('',(-2.724938966801,-2.11,-1.665334536938E-16)+ );+#16783 = DIRECTION('',(0.,0.,1.));+#16784 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#16785 = DEFINITIONAL_REPRESENTATION('',(#16786),#16790);+#16786 = LINE('',#16787,#16788);+#16787 = CARTESIAN_POINT('',(4.69137475541E-18,-0.41));+#16788 = VECTOR('',#16789,1.);+#16789 = DIRECTION('',(1.,0.));+#16790 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16791 = ORIENTED_EDGE('',*,*,#16792,.T.);+#16792 = EDGE_CURVE('',#16765,#16793,#16795,.T.);+#16793 = VERTEX_POINT('',#16794);+#16794 = CARTESIAN_POINT('',(-3.,-1.7,0.2));+#16795 = SURFACE_CURVE('',#16796,(#16800,#16807),.PCURVE_S1.);+#16796 = LINE('',#16797,#16798);+#16797 = CARTESIAN_POINT('',(-3.,-1.7,-1.665334536938E-16));+#16798 = VECTOR('',#16799,1.);+#16799 = DIRECTION('',(0.,0.,1.));+#16800 = PCURVE('',#1817,#16801);+#16801 = DEFINITIONAL_REPRESENTATION('',(#16802),#16806);+#16802 = LINE('',#16803,#16804);+#16803 = CARTESIAN_POINT('',(-0.548953137803,-0.57439038681));+#16804 = VECTOR('',#16805,1.);+#16805 = DIRECTION('',(1.,0.));+#16806 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16807 = PCURVE('',#16808,#16813);+#16808 = PLANE('',#16809);+#16809 = AXIS2_PLACEMENT_3D('',#16810,#16811,#16812);+#16810 = CARTESIAN_POINT('',(-3.,-2.11,-1.665334536938E-16));+#16811 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#16812 = DIRECTION('',(0.,0.,1.));+#16813 = DEFINITIONAL_REPRESENTATION('',(#16814),#16818);+#16814 = LINE('',#16815,#16816);+#16815 = CARTESIAN_POINT('',(0.,-0.41));+#16816 = VECTOR('',#16817,1.);+#16817 = DIRECTION('',(1.,0.));+#16818 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16819 = ORIENTED_EDGE('',*,*,#16820,.T.);+#16820 = EDGE_CURVE('',#16793,#16821,#16823,.T.);+#16821 = VERTEX_POINT('',#16822);+#16822 = CARTESIAN_POINT('',(-2.724938966801,-1.7,0.2));+#16823 = SURFACE_CURVE('',#16824,(#16828,#16835),.PCURVE_S1.);+#16824 = LINE('',#16825,#16826);+#16825 = CARTESIAN_POINT('',(-3.,-1.7,0.2));+#16826 = VECTOR('',#16827,1.);+#16827 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#16828 = PCURVE('',#1817,#16829);+#16829 = DEFINITIONAL_REPRESENTATION('',(#16830),#16834);+#16830 = LINE('',#16831,#16832);+#16831 = CARTESIAN_POINT('',(-0.348953137803,-0.57439038681));+#16832 = VECTOR('',#16833,1.);+#16833 = DIRECTION('',(0.,1.));+#16834 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16835 = PCURVE('',#16836,#16841);+#16836 = PLANE('',#16837);+#16837 = AXIS2_PLACEMENT_3D('',#16838,#16839,#16840);+#16838 = CARTESIAN_POINT('',(-3.,-2.11,0.2));+#16839 = DIRECTION('',(0.,0.,-1.));+#16840 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#16841 = DEFINITIONAL_REPRESENTATION('',(#16842),#16846);+#16842 = LINE('',#16843,#16844);+#16843 = CARTESIAN_POINT('',(-4.69137475541E-18,-0.41));+#16844 = VECTOR('',#16845,1.);+#16845 = DIRECTION('',(1.,0.));+#16846 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16847 = ORIENTED_EDGE('',*,*,#16848,.T.);+#16848 = EDGE_CURVE('',#16821,#16849,#16851,.T.);+#16849 = VERTEX_POINT('',#16850);+#16850 = CARTESIAN_POINT('',(-2.6264581915,-1.7,0.282635182233));+#16851 = SURFACE_CURVE('',#16852,(#16857,#16868),.PCURVE_S1.);+#16852 = CIRCLE('',#16853,0.1);+#16853 = AXIS2_PLACEMENT_3D('',#16854,#16855,#16856);+#16854 = CARTESIAN_POINT('',(-2.724938966801,-1.7,0.3));+#16855 = DIRECTION('',(-1.144237745222E-17,-1.,-0.));+#16856 = DIRECTION('',(0.,0.,-1.));+#16857 = PCURVE('',#1817,#16858);+#16858 = DEFINITIONAL_REPRESENTATION('',(#16859),#16867);+#16859 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#16860,#16861,#16862,#16863+ ,#16864,#16865,#16866),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#16860 = CARTESIAN_POINT('',(-0.348953137803,-0.299329353611));+#16861 = CARTESIAN_POINT('',(-0.348953137803,-0.126124272854));+#16862 = CARTESIAN_POINT('',(-0.198953137803,-0.212726813233));+#16863 = CARTESIAN_POINT('',(-4.8953137803E-02,-0.299329353611));+#16864 = CARTESIAN_POINT('',(-0.198953137803,-0.385931893989));+#16865 = CARTESIAN_POINT('',(-0.348953137803,-0.472534434368));+#16866 = CARTESIAN_POINT('',(-0.348953137803,-0.299329353611));+#16867 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16868 = PCURVE('',#16869,#16874);+#16869 = CYLINDRICAL_SURFACE('',#16870,0.1);+#16870 = AXIS2_PLACEMENT_3D('',#16871,#16872,#16873);+#16871 = CARTESIAN_POINT('',(-2.724938966801,-2.11,0.3));+#16872 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#16873 = DIRECTION('',(-0.,0.,-1.));+#16874 = DEFINITIONAL_REPRESENTATION('',(#16875),#16879);+#16875 = LINE('',#16876,#16877);+#16876 = CARTESIAN_POINT('',(0.,-0.41));+#16877 = VECTOR('',#16878,1.);+#16878 = DIRECTION('',(1.,0.));+#16879 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16880 = ORIENTED_EDGE('',*,*,#16881,.T.);+#16881 = EDGE_CURVE('',#16849,#16882,#16884,.T.);+#16882 = VERTEX_POINT('',#16883);+#16883 = CARTESIAN_POINT('',(-2.545442325904,-1.7,0.7770944533));+#16884 = SURFACE_CURVE('',#16885,(#16889,#16896),.PCURVE_S1.);+#16885 = LINE('',#16886,#16887);+#16886 = CARTESIAN_POINT('',(-2.6264581915,-1.7,0.282635182233));+#16887 = VECTOR('',#16888,1.);+#16888 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087)+ );+#16889 = PCURVE('',#1817,#16890);+#16890 = DEFINITIONAL_REPRESENTATION('',(#16891),#16895);+#16891 = LINE('',#16892,#16893);+#16892 = CARTESIAN_POINT('',(-0.26631795557,-0.20084857831));+#16893 = VECTOR('',#16894,1.);+#16894 = DIRECTION('',(0.986841372087,0.161691392282));+#16895 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16896 = PCURVE('',#16897,#16902);+#16897 = PLANE('',#16898);+#16898 = AXIS2_PLACEMENT_3D('',#16899,#16900,#16901);+#16899 = CARTESIAN_POINT('',(-2.6264581915,-2.11,0.282635182233));+#16900 = DIRECTION('',(0.986841372087,-1.129181146488E-17,+ -0.161691392282));+#16901 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087)+ );+#16902 = DEFINITIONAL_REPRESENTATION('',(#16903),#16907);+#16903 = LINE('',#16904,#16905);+#16904 = CARTESIAN_POINT('',(-7.585549159209E-19,-0.41));+#16905 = VECTOR('',#16906,1.);+#16906 = DIRECTION('',(1.,-5.984962792299E-34));+#16907 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16908 = ORIENTED_EDGE('',*,*,#16909,.T.);+#16909 = EDGE_CURVE('',#16882,#1774,#16910,.T.);+#16910 = SURFACE_CURVE('',#16911,(#16916,#16923),.PCURVE_S1.);+#16911 = CIRCLE('',#16912,0.3);+#16912 = AXIS2_PLACEMENT_3D('',#16913,#16914,#16915);+#16913 = CARTESIAN_POINT('',(-2.25,-1.7,0.725));+#16914 = DIRECTION('',(1.144237745222E-17,1.,7.703719777549E-34));+#16915 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667+ ));+#16916 = PCURVE('',#1817,#16917);+#16917 = DEFINITIONAL_REPRESENTATION('',(#16918),#16922);+#16918 = CIRCLE('',#16919,0.3);+#16919 = AXIS2_PLACEMENT_2D('',#16920,#16921);+#16920 = CARTESIAN_POINT('',(0.176046862197,0.17560961319));+#16921 = DIRECTION('',(0.173648177667,-0.984807753012));+#16922 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16923 = PCURVE('',#1789,#16924);+#16924 = DEFINITIONAL_REPRESENTATION('',(#16925),#16929);+#16925 = LINE('',#16926,#16927);+#16926 = CARTESIAN_POINT('',(6.28318530718,-0.41));+#16927 = VECTOR('',#16928,1.);+#16928 = DIRECTION('',(-1.,0.));+#16929 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16930 = ORIENTED_EDGE('',*,*,#1801,.T.);+#16931 = ADVANCED_FACE('',(#16932),#16897,.F.);+#16932 = FACE_BOUND('',#16933,.F.);+#16933 = EDGE_LOOP('',(#16934,#16957,#16958,#16981));+#16934 = ORIENTED_EDGE('',*,*,#16935,.T.);+#16935 = EDGE_CURVE('',#16936,#16849,#16938,.T.);+#16936 = VERTEX_POINT('',#16937);+#16937 = CARTESIAN_POINT('',(-2.6264581915,-2.11,0.282635182233));+#16938 = SURFACE_CURVE('',#16939,(#16943,#16950),.PCURVE_S1.);+#16939 = LINE('',#16940,#16941);+#16940 = CARTESIAN_POINT('',(-2.6264581915,-2.11,0.282635182233));+#16941 = VECTOR('',#16942,1.);+#16942 = DIRECTION('',(1.144237745222E-17,1.,0.));+#16943 = PCURVE('',#16897,#16944);+#16944 = DEFINITIONAL_REPRESENTATION('',(#16945),#16949);+#16945 = LINE('',#16946,#16947);+#16946 = CARTESIAN_POINT('',(0.,-0.));+#16947 = VECTOR('',#16948,1.);+#16948 = DIRECTION('',(-5.385465771581E-30,-1.));+#16949 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16950 = PCURVE('',#16869,#16951);+#16951 = DEFINITIONAL_REPRESENTATION('',(#16952),#16956);+#16952 = LINE('',#16953,#16954);+#16953 = CARTESIAN_POINT('',(1.396263401592,0.));+#16954 = VECTOR('',#16955,1.);+#16955 = DIRECTION('',(0.,-1.));+#16956 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16957 = ORIENTED_EDGE('',*,*,#16881,.T.);+#16958 = ORIENTED_EDGE('',*,*,#16959,.F.);+#16959 = EDGE_CURVE('',#16960,#16882,#16962,.T.);+#16960 = VERTEX_POINT('',#16961);+#16961 = CARTESIAN_POINT('',(-2.545442325904,-2.11,0.7770944533));+#16962 = SURFACE_CURVE('',#16963,(#16967,#16974),.PCURVE_S1.);+#16963 = LINE('',#16964,#16965);+#16964 = CARTESIAN_POINT('',(-2.545442325904,-2.11,0.7770944533));+#16965 = VECTOR('',#16966,1.);+#16966 = DIRECTION('',(1.144237745222E-17,1.,0.));+#16967 = PCURVE('',#16897,#16968);+#16968 = DEFINITIONAL_REPRESENTATION('',(#16969),#16973);+#16969 = LINE('',#16970,#16971);+#16970 = CARTESIAN_POINT('',(0.501052433606,-9.270141137704E-19));+#16971 = VECTOR('',#16972,1.);+#16972 = DIRECTION('',(-5.385465771581E-30,-1.));+#16973 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16974 = PCURVE('',#1789,#16975);+#16975 = DEFINITIONAL_REPRESENTATION('',(#16976),#16980);+#16976 = LINE('',#16977,#16978);+#16977 = CARTESIAN_POINT('',(6.28318530718,0.));+#16978 = VECTOR('',#16979,1.);+#16979 = DIRECTION('',(0.,-1.));+#16980 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16981 = ORIENTED_EDGE('',*,*,#16982,.F.);+#16982 = EDGE_CURVE('',#16936,#16960,#16983,.T.);+#16983 = SURFACE_CURVE('',#16984,(#16988,#16995),.PCURVE_S1.);+#16984 = LINE('',#16985,#16986);+#16985 = CARTESIAN_POINT('',(-2.6264581915,-2.11,0.282635182233));+#16986 = VECTOR('',#16987,1.);+#16987 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087)+ );+#16988 = PCURVE('',#16897,#16989);+#16989 = DEFINITIONAL_REPRESENTATION('',(#16990),#16994);+#16990 = LINE('',#16991,#16992);+#16991 = CARTESIAN_POINT('',(0.,-0.));+#16992 = VECTOR('',#16993,1.);+#16993 = DIRECTION('',(1.,-5.984962792299E-34));+#16994 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16995 = PCURVE('',#1761,#16996);+#16996 = DEFINITIONAL_REPRESENTATION('',(#16997),#17001);+#16997 = LINE('',#16998,#16999);+#16998 = CARTESIAN_POINT('',(-0.26631795557,-0.20084857831));+#16999 = VECTOR('',#17000,1.);+#17000 = DIRECTION('',(0.986841372087,0.161691392282));+#17001 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17002 = ADVANCED_FACE('',(#17003),#16869,.F.);+#17003 = FACE_BOUND('',#17004,.F.);+#17004 = EDGE_LOOP('',(#17005,#17028,#17029,#17030));+#17005 = ORIENTED_EDGE('',*,*,#17006,.T.);+#17006 = EDGE_CURVE('',#17007,#16821,#17009,.T.);+#17007 = VERTEX_POINT('',#17008);+#17008 = CARTESIAN_POINT('',(-2.724938966801,-2.11,0.2));+#17009 = SURFACE_CURVE('',#17010,(#17014,#17021),.PCURVE_S1.);+#17010 = LINE('',#17011,#17012);+#17011 = CARTESIAN_POINT('',(-2.724938966801,-2.11,0.2));+#17012 = VECTOR('',#17013,1.);+#17013 = DIRECTION('',(1.144237745222E-17,1.,0.));+#17014 = PCURVE('',#16869,#17015);+#17015 = DEFINITIONAL_REPRESENTATION('',(#17016),#17020);+#17016 = LINE('',#17017,#17018);+#17017 = CARTESIAN_POINT('',(0.,0.));+#17018 = VECTOR('',#17019,1.);+#17019 = DIRECTION('',(0.,-1.));+#17020 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17021 = PCURVE('',#16836,#17022);+#17022 = DEFINITIONAL_REPRESENTATION('',(#17023),#17027);+#17023 = LINE('',#17024,#17025);+#17024 = CARTESIAN_POINT('',(0.275061033199,-3.147352164261E-18));+#17025 = VECTOR('',#17026,1.);+#17026 = DIRECTION('',(0.,-1.));+#17027 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17028 = ORIENTED_EDGE('',*,*,#16848,.T.);+#17029 = ORIENTED_EDGE('',*,*,#16935,.F.);+#17030 = ORIENTED_EDGE('',*,*,#17031,.F.);+#17031 = EDGE_CURVE('',#17007,#16936,#17032,.T.);+#17032 = SURFACE_CURVE('',#17033,(#17038,#17045),.PCURVE_S1.);+#17033 = CIRCLE('',#17034,0.1);+#17034 = AXIS2_PLACEMENT_3D('',#17035,#17036,#17037);+#17035 = CARTESIAN_POINT('',(-2.724938966801,-2.11,0.3));+#17036 = DIRECTION('',(-1.144237745222E-17,-1.,-0.));+#17037 = DIRECTION('',(0.,0.,-1.));+#17038 = PCURVE('',#16869,#17039);+#17039 = DEFINITIONAL_REPRESENTATION('',(#17040),#17044);+#17040 = LINE('',#17041,#17042);+#17041 = CARTESIAN_POINT('',(0.,0.));+#17042 = VECTOR('',#17043,1.);+#17043 = DIRECTION('',(1.,0.));+#17044 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17045 = PCURVE('',#1761,#17046);+#17046 = DEFINITIONAL_REPRESENTATION('',(#17047),#17055);+#17047 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#17048,#17049,#17050,#17051+ ,#17052,#17053,#17054),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#17048 = CARTESIAN_POINT('',(-0.348953137803,-0.299329353611));+#17049 = CARTESIAN_POINT('',(-0.348953137803,-0.126124272854));+#17050 = CARTESIAN_POINT('',(-0.198953137803,-0.212726813233));+#17051 = CARTESIAN_POINT('',(-4.8953137803E-02,-0.299329353611));+#17052 = CARTESIAN_POINT('',(-0.198953137803,-0.385931893989));+#17053 = CARTESIAN_POINT('',(-0.348953137803,-0.472534434368));+#17054 = CARTESIAN_POINT('',(-0.348953137803,-0.299329353611));+#17055 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17056 = ADVANCED_FACE('',(#17057),#16836,.F.);+#17057 = FACE_BOUND('',#17058,.F.);+#17058 = EDGE_LOOP('',(#17059,#17082,#17083,#17084));+#17059 = ORIENTED_EDGE('',*,*,#17060,.T.);+#17060 = EDGE_CURVE('',#17061,#16793,#17063,.T.);+#17061 = VERTEX_POINT('',#17062);+#17062 = CARTESIAN_POINT('',(-3.,-2.11,0.2));+#17063 = SURFACE_CURVE('',#17064,(#17068,#17075),.PCURVE_S1.);+#17064 = LINE('',#17065,#17066);+#17065 = CARTESIAN_POINT('',(-3.,-2.11,0.2));+#17066 = VECTOR('',#17067,1.);+#17067 = DIRECTION('',(1.144237745222E-17,1.,0.));+#17068 = PCURVE('',#16836,#17069);+#17069 = DEFINITIONAL_REPRESENTATION('',(#17070),#17074);+#17070 = LINE('',#17071,#17072);+#17071 = CARTESIAN_POINT('',(0.,-0.));+#17072 = VECTOR('',#17073,1.);+#17073 = DIRECTION('',(0.,-1.));+#17074 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17075 = PCURVE('',#16808,#17076);+#17076 = DEFINITIONAL_REPRESENTATION('',(#17077),#17081);+#17077 = LINE('',#17078,#17079);+#17078 = CARTESIAN_POINT('',(0.2,0.));+#17079 = VECTOR('',#17080,1.);+#17080 = DIRECTION('',(0.,-1.));+#17081 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17082 = ORIENTED_EDGE('',*,*,#16820,.T.);+#17083 = ORIENTED_EDGE('',*,*,#17006,.F.);+#17084 = ORIENTED_EDGE('',*,*,#17085,.F.);+#17085 = EDGE_CURVE('',#17061,#17007,#17086,.T.);+#17086 = SURFACE_CURVE('',#17087,(#17091,#17098),.PCURVE_S1.);+#17087 = LINE('',#17088,#17089);+#17088 = CARTESIAN_POINT('',(-3.,-2.11,0.2));+#17089 = VECTOR('',#17090,1.);+#17090 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#17091 = PCURVE('',#16836,#17092);+#17092 = DEFINITIONAL_REPRESENTATION('',(#17093),#17097);+#17093 = LINE('',#17094,#17095);+#17094 = CARTESIAN_POINT('',(0.,-0.));+#17095 = VECTOR('',#17096,1.);+#17096 = DIRECTION('',(1.,0.));+#17097 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17098 = PCURVE('',#1761,#17099);+#17099 = DEFINITIONAL_REPRESENTATION('',(#17100),#17104);+#17100 = LINE('',#17101,#17102);+#17101 = CARTESIAN_POINT('',(-0.348953137803,-0.57439038681));+#17102 = VECTOR('',#17103,1.);+#17103 = DIRECTION('',(0.,1.));+#17104 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17105 = ADVANCED_FACE('',(#17106),#16808,.F.);+#17106 = FACE_BOUND('',#17107,.F.);+#17107 = EDGE_LOOP('',(#17108,#17131,#17132,#17133));+#17108 = ORIENTED_EDGE('',*,*,#17109,.T.);+#17109 = EDGE_CURVE('',#17110,#16765,#17112,.T.);+#17110 = VERTEX_POINT('',#17111);+#17111 = CARTESIAN_POINT('',(-3.,-2.11,-1.665334536938E-16));+#17112 = SURFACE_CURVE('',#17113,(#17117,#17124),.PCURVE_S1.);+#17113 = LINE('',#17114,#17115);+#17114 = CARTESIAN_POINT('',(-3.,-2.11,-1.665334536938E-16));+#17115 = VECTOR('',#17116,1.);+#17116 = DIRECTION('',(1.144237745222E-17,1.,0.));+#17117 = PCURVE('',#16808,#17118);+#17118 = DEFINITIONAL_REPRESENTATION('',(#17119),#17123);+#17119 = LINE('',#17120,#17121);+#17120 = CARTESIAN_POINT('',(0.,0.));+#17121 = VECTOR('',#17122,1.);+#17122 = DIRECTION('',(0.,-1.));+#17123 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17124 = PCURVE('',#16780,#17125);+#17125 = DEFINITIONAL_REPRESENTATION('',(#17126),#17130);+#17126 = LINE('',#17127,#17128);+#17127 = CARTESIAN_POINT('',(0.275061033199,3.147352164261E-18));+#17128 = VECTOR('',#17129,1.);+#17129 = DIRECTION('',(0.,-1.));+#17130 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17131 = ORIENTED_EDGE('',*,*,#16792,.T.);+#17132 = ORIENTED_EDGE('',*,*,#17060,.F.);+#17133 = ORIENTED_EDGE('',*,*,#17134,.F.);+#17134 = EDGE_CURVE('',#17110,#17061,#17135,.T.);+#17135 = SURFACE_CURVE('',#17136,(#17140,#17147),.PCURVE_S1.);+#17136 = LINE('',#17137,#17138);+#17137 = CARTESIAN_POINT('',(-3.,-2.11,-1.665334536938E-16));+#17138 = VECTOR('',#17139,1.);+#17139 = DIRECTION('',(0.,0.,1.));+#17140 = PCURVE('',#16808,#17141);+#17141 = DEFINITIONAL_REPRESENTATION('',(#17142),#17146);+#17142 = LINE('',#17143,#17144);+#17143 = CARTESIAN_POINT('',(0.,0.));+#17144 = VECTOR('',#17145,1.);+#17145 = DIRECTION('',(1.,0.));+#17146 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17147 = PCURVE('',#1761,#17148);+#17148 = DEFINITIONAL_REPRESENTATION('',(#17149),#17153);+#17149 = LINE('',#17150,#17151);+#17150 = CARTESIAN_POINT('',(-0.548953137803,-0.57439038681));+#17151 = VECTOR('',#17152,1.);+#17152 = DIRECTION('',(1.,0.));+#17153 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17154 = ADVANCED_FACE('',(#17155),#16780,.F.);+#17155 = FACE_BOUND('',#17156,.F.);+#17156 = EDGE_LOOP('',(#17157,#17180,#17181,#17182));+#17157 = ORIENTED_EDGE('',*,*,#17158,.T.);+#17158 = EDGE_CURVE('',#17159,#16736,#17161,.T.);+#17159 = VERTEX_POINT('',#17160);+#17160 = CARTESIAN_POINT('',(-2.724938966801,-2.11,-1.665334536938E-16)+ );+#17161 = SURFACE_CURVE('',#17162,(#17166,#17173),.PCURVE_S1.);+#17162 = LINE('',#17163,#17164);+#17163 = CARTESIAN_POINT('',(-2.724938966801,-2.11,-1.665334536938E-16)+ );+#17164 = VECTOR('',#17165,1.);+#17165 = DIRECTION('',(1.144237745222E-17,1.,0.));+#17166 = PCURVE('',#16780,#17167);+#17167 = DEFINITIONAL_REPRESENTATION('',(#17168),#17172);+#17168 = LINE('',#17169,#17170);+#17169 = CARTESIAN_POINT('',(0.,0.));+#17170 = VECTOR('',#17171,1.);+#17171 = DIRECTION('',(0.,-1.));+#17172 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17173 = PCURVE('',#16752,#17174);+#17174 = DEFINITIONAL_REPRESENTATION('',(#17175),#17179);+#17175 = LINE('',#17176,#17177);+#17176 = CARTESIAN_POINT('',(4.886921905584,0.));+#17177 = VECTOR('',#17178,1.);+#17178 = DIRECTION('',(0.,-1.));+#17179 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17180 = ORIENTED_EDGE('',*,*,#16764,.T.);+#17181 = ORIENTED_EDGE('',*,*,#17109,.F.);+#17182 = ORIENTED_EDGE('',*,*,#17183,.F.);+#17183 = EDGE_CURVE('',#17159,#17110,#17184,.T.);+#17184 = SURFACE_CURVE('',#17185,(#17189,#17196),.PCURVE_S1.);+#17185 = LINE('',#17186,#17187);+#17186 = CARTESIAN_POINT('',(-2.724938966801,-2.11,-1.665334536938E-16)+ );+#17187 = VECTOR('',#17188,1.);+#17188 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#17189 = PCURVE('',#16780,#17190);+#17190 = DEFINITIONAL_REPRESENTATION('',(#17191),#17195);+#17191 = LINE('',#17192,#17193);+#17192 = CARTESIAN_POINT('',(0.,0.));+#17193 = VECTOR('',#17194,1.);+#17194 = DIRECTION('',(1.,0.));+#17195 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17196 = PCURVE('',#1761,#17197);+#17197 = DEFINITIONAL_REPRESENTATION('',(#17198),#17202);+#17198 = LINE('',#17199,#17200);+#17199 = CARTESIAN_POINT('',(-0.548953137803,-0.299329353611));+#17200 = VECTOR('',#17201,1.);+#17201 = DIRECTION('',(0.,-1.));+#17202 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17203 = ADVANCED_FACE('',(#17204),#16752,.T.);+#17204 = FACE_BOUND('',#17205,.T.);+#17205 = EDGE_LOOP('',(#17206,#17230,#17231,#17232));+#17206 = ORIENTED_EDGE('',*,*,#17207,.T.);+#17207 = EDGE_CURVE('',#17208,#17159,#17210,.T.);+#17208 = VERTEX_POINT('',#17209);+#17209 = CARTESIAN_POINT('',(-2.429496640897,-2.11,0.2479055467));+#17210 = SURFACE_CURVE('',#17211,(#17216,#17223),.PCURVE_S1.);+#17211 = CIRCLE('',#17212,0.3);+#17212 = AXIS2_PLACEMENT_3D('',#17213,#17214,#17215);+#17213 = CARTESIAN_POINT('',(-2.724938966801,-2.11,0.3));+#17214 = DIRECTION('',(1.144237745222E-17,1.,7.703719777549E-34));+#17215 = DIRECTION('',(0.984807753012,-1.126854202784E-17,+ -0.173648177667));+#17216 = PCURVE('',#16752,#17217);+#17217 = DEFINITIONAL_REPRESENTATION('',(#17218),#17222);+#17218 = LINE('',#17219,#17220);+#17219 = CARTESIAN_POINT('',(6.28318530718,0.));+#17220 = VECTOR('',#17221,1.);+#17221 = DIRECTION('',(-1.,0.));+#17222 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17223 = PCURVE('',#1761,#17224);+#17224 = DEFINITIONAL_REPRESENTATION('',(#17225),#17229);+#17225 = CIRCLE('',#17226,0.3);+#17226 = AXIS2_PLACEMENT_2D('',#17227,#17228);+#17227 = CARTESIAN_POINT('',(-0.248953137803,-0.299329353611));+#17228 = DIRECTION('',(-0.173648177667,0.984807753012));+#17229 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17230 = ORIENTED_EDGE('',*,*,#17158,.T.);+#17231 = ORIENTED_EDGE('',*,*,#16735,.F.);+#17232 = ORIENTED_EDGE('',*,*,#17233,.F.);+#17233 = EDGE_CURVE('',#17208,#16708,#17234,.T.);+#17234 = SURFACE_CURVE('',#17235,(#17239,#17246),.PCURVE_S1.);+#17235 = LINE('',#17236,#17237);+#17236 = CARTESIAN_POINT('',(-2.429496640897,-2.11,0.2479055467));+#17237 = VECTOR('',#17238,1.);+#17238 = DIRECTION('',(1.144237745222E-17,1.,0.));+#17239 = PCURVE('',#16752,#17240);+#17240 = DEFINITIONAL_REPRESENTATION('',(#17241),#17245);+#17241 = LINE('',#17242,#17243);+#17242 = CARTESIAN_POINT('',(6.28318530718,0.));+#17243 = VECTOR('',#17244,1.);+#17244 = DIRECTION('',(0.,-1.));+#17245 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17246 = PCURVE('',#16723,#17247);+#17247 = DEFINITIONAL_REPRESENTATION('',(#17248),#17252);+#17248 = LINE('',#17249,#17250);+#17249 = CARTESIAN_POINT('',(0.501052433606,9.270141137704E-19));+#17250 = VECTOR('',#17251,1.);+#17251 = DIRECTION('',(5.385465771581E-30,-1.));+#17252 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17253 = ADVANCED_FACE('',(#17254),#16723,.F.);+#17254 = FACE_BOUND('',#17255,.F.);+#17255 = EDGE_LOOP('',(#17256,#17279,#17280,#17281));+#17256 = ORIENTED_EDGE('',*,*,#17257,.T.);+#17257 = EDGE_CURVE('',#17258,#16675,#17260,.T.);+#17258 = VERTEX_POINT('',#17259);+#17259 = CARTESIAN_POINT('',(-2.348480775301,-2.11,0.742364817767));+#17260 = SURFACE_CURVE('',#17261,(#17265,#17272),.PCURVE_S1.);+#17261 = LINE('',#17262,#17263);+#17262 = CARTESIAN_POINT('',(-2.348480775301,-2.11,0.742364817767));+#17263 = VECTOR('',#17264,1.);+#17264 = DIRECTION('',(1.144237745222E-17,1.,0.));+#17265 = PCURVE('',#16723,#17266);+#17266 = DEFINITIONAL_REPRESENTATION('',(#17267),#17271);+#17267 = LINE('',#17268,#17269);+#17268 = CARTESIAN_POINT('',(0.,-0.));+#17269 = VECTOR('',#17270,1.);+#17270 = DIRECTION('',(5.385465771581E-30,-1.));+#17271 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17272 = PCURVE('',#16695,#17273);+#17273 = DEFINITIONAL_REPRESENTATION('',(#17274),#17278);+#17274 = LINE('',#17275,#17276);+#17275 = CARTESIAN_POINT('',(1.396263401592,0.));+#17276 = VECTOR('',#17277,1.);+#17277 = DIRECTION('',(0.,-1.));+#17278 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17279 = ORIENTED_EDGE('',*,*,#16707,.T.);+#17280 = ORIENTED_EDGE('',*,*,#17233,.F.);+#17281 = ORIENTED_EDGE('',*,*,#17282,.F.);+#17282 = EDGE_CURVE('',#17258,#17208,#17283,.T.);+#17283 = SURFACE_CURVE('',#17284,(#17288,#17295),.PCURVE_S1.);+#17284 = LINE('',#17285,#17286);+#17285 = CARTESIAN_POINT('',(-2.348480775301,-2.11,0.742364817767));+#17286 = VECTOR('',#17287,1.);+#17287 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087+ ));+#17288 = PCURVE('',#16723,#17289);+#17289 = DEFINITIONAL_REPRESENTATION('',(#17290),#17294);+#17290 = LINE('',#17291,#17292);+#17291 = CARTESIAN_POINT('',(0.,-0.));+#17292 = VECTOR('',#17293,1.);+#17293 = DIRECTION('',(1.,5.984962792299E-34));+#17294 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17295 = PCURVE('',#1761,#17296);+#17296 = DEFINITIONAL_REPRESENTATION('',(#17297),#17301);+#17297 = LINE('',#17298,#17299);+#17298 = CARTESIAN_POINT('',(0.193411679964,7.7128837889E-02));+#17299 = VECTOR('',#17300,1.);+#17300 = DIRECTION('',(-0.986841372087,-0.161691392282));+#17301 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17302 = ADVANCED_FACE('',(#17303),#16695,.F.);+#17303 = FACE_BOUND('',#17304,.F.);+#17304 = EDGE_LOOP('',(#17305,#17328,#17329,#17330));+#17305 = ORIENTED_EDGE('',*,*,#17306,.T.);+#17306 = EDGE_CURVE('',#17307,#16652,#17309,.T.);+#17307 = VERTEX_POINT('',#17308);+#17308 = CARTESIAN_POINT('',(-2.25,-2.11,0.825));+#17309 = SURFACE_CURVE('',#17310,(#17314,#17321),.PCURVE_S1.);+#17310 = LINE('',#17311,#17312);+#17311 = CARTESIAN_POINT('',(-2.25,-2.11,0.825));+#17312 = VECTOR('',#17313,1.);+#17313 = DIRECTION('',(1.144237745222E-17,1.,0.));+#17314 = PCURVE('',#16695,#17315);+#17315 = DEFINITIONAL_REPRESENTATION('',(#17316),#17320);+#17316 = LINE('',#17317,#17318);+#17317 = CARTESIAN_POINT('',(0.,0.));+#17318 = VECTOR('',#17319,1.);+#17319 = DIRECTION('',(0.,-1.));+#17320 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17321 = PCURVE('',#474,#17322);+#17322 = DEFINITIONAL_REPRESENTATION('',(#17323),#17327);+#17323 = LINE('',#17324,#17325);+#17324 = CARTESIAN_POINT('',(0.45,5.149069853499E-18));+#17325 = VECTOR('',#17326,1.);+#17326 = DIRECTION('',(0.,-1.));+#17327 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17328 = ORIENTED_EDGE('',*,*,#16674,.T.);+#17329 = ORIENTED_EDGE('',*,*,#17257,.F.);+#17330 = ORIENTED_EDGE('',*,*,#17331,.F.);+#17331 = EDGE_CURVE('',#17307,#17258,#17332,.T.);+#17332 = SURFACE_CURVE('',#17333,(#17338,#17345),.PCURVE_S1.);+#17333 = CIRCLE('',#17334,0.1);+#17334 = AXIS2_PLACEMENT_3D('',#17335,#17336,#17337);+#17335 = CARTESIAN_POINT('',(-2.25,-2.11,0.725));+#17336 = DIRECTION('',(-1.144237745222E-17,-1.,3.284293275761E-47));+#17337 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.));+#17338 = PCURVE('',#16695,#17339);+#17339 = DEFINITIONAL_REPRESENTATION('',(#17340),#17344);+#17340 = LINE('',#17341,#17342);+#17341 = CARTESIAN_POINT('',(0.,0.));+#17342 = VECTOR('',#17343,1.);+#17343 = DIRECTION('',(1.,0.));+#17344 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17345 = PCURVE('',#1761,#17346);+#17346 = DEFINITIONAL_REPRESENTATION('',(#17347),#17355);+#17347 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#17348,#17349,#17350,#17351+ ,#17352,#17353,#17354),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#17348 = CARTESIAN_POINT('',(0.276046862197,0.17560961319));+#17349 = CARTESIAN_POINT('',(0.276046862197,2.404532433112E-03));+#17350 = CARTESIAN_POINT('',(0.126046862197,8.900707281156E-02));+#17351 = CARTESIAN_POINT('',(-2.3953137803E-02,0.17560961319));+#17352 = CARTESIAN_POINT('',(0.126046862197,0.262212153568));+#17353 = CARTESIAN_POINT('',(0.276046862197,0.348814693947));+#17354 = CARTESIAN_POINT('',(0.276046862197,0.17560961319));+#17355 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17356 = ADVANCED_FACE('',(#17357),#1789,.T.);+#17357 = FACE_BOUND('',#17358,.T.);+#17358 = EDGE_LOOP('',(#17359,#17381,#17382,#17383));+#17359 = ORIENTED_EDGE('',*,*,#17360,.T.);+#17360 = EDGE_CURVE('',#16960,#1746,#17361,.T.);+#17361 = SURFACE_CURVE('',#17362,(#17367,#17374),.PCURVE_S1.);+#17362 = CIRCLE('',#17363,0.3);+#17363 = AXIS2_PLACEMENT_3D('',#17364,#17365,#17366);+#17364 = CARTESIAN_POINT('',(-2.25,-2.11,0.725));+#17365 = DIRECTION('',(1.144237745222E-17,1.,7.703719777549E-34));+#17366 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667+ ));+#17367 = PCURVE('',#1789,#17368);+#17368 = DEFINITIONAL_REPRESENTATION('',(#17369),#17373);+#17369 = LINE('',#17370,#17371);+#17370 = CARTESIAN_POINT('',(6.28318530718,0.));+#17371 = VECTOR('',#17372,1.);+#17372 = DIRECTION('',(-1.,0.));+#17373 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17374 = PCURVE('',#1761,#17375);+#17375 = DEFINITIONAL_REPRESENTATION('',(#17376),#17380);+#17376 = CIRCLE('',#17377,0.3);+#17377 = AXIS2_PLACEMENT_2D('',#17378,#17379);+#17378 = CARTESIAN_POINT('',(0.176046862197,0.17560961319));+#17379 = DIRECTION('',(0.173648177667,-0.984807753012));+#17380 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17381 = ORIENTED_EDGE('',*,*,#1773,.T.);+#17382 = ORIENTED_EDGE('',*,*,#16909,.F.);+#17383 = ORIENTED_EDGE('',*,*,#16959,.F.);+#17384 = ADVANCED_FACE('',(#17385),#1761,.F.);+#17385 = FACE_BOUND('',#17386,.F.);+#17386 = EDGE_LOOP('',(#17387,#17408,#17429,#17430,#17431,#17432,#17433,+ #17434,#17435,#17436,#17437,#17438));+#17387 = ORIENTED_EDGE('',*,*,#17388,.F.);+#17388 = EDGE_CURVE('',#459,#1723,#17389,.T.);+#17389 = SURFACE_CURVE('',#17390,(#17394,#17401),.PCURVE_S1.);+#17390 = LINE('',#17391,#17392);+#17391 = CARTESIAN_POINT('',(-1.95,-2.11,0.786976568901));+#17392 = VECTOR('',#17393,1.);+#17393 = DIRECTION('',(0.,0.,1.));+#17394 = PCURVE('',#1761,#17395);+#17395 = DEFINITIONAL_REPRESENTATION('',(#17396),#17400);+#17396 = LINE('',#17397,#17398);+#17397 = CARTESIAN_POINT('',(0.238023431098,0.47560961319));+#17398 = VECTOR('',#17399,1.);+#17399 = DIRECTION('',(1.,0.));+#17400 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17401 = PCURVE('',#502,#17402);+#17402 = DEFINITIONAL_REPRESENTATION('',(#17403),#17407);+#17403 = LINE('',#17404,#17405);+#17404 = CARTESIAN_POINT('',(0.165,-0.238023431099));+#17405 = VECTOR('',#17406,1.);+#17406 = DIRECTION('',(0.,1.));+#17407 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17408 = ORIENTED_EDGE('',*,*,#17409,.T.);+#17409 = EDGE_CURVE('',#459,#17307,#17410,.T.);+#17410 = SURFACE_CURVE('',#17411,(#17415,#17422),.PCURVE_S1.);+#17411 = LINE('',#17412,#17413);+#17412 = CARTESIAN_POINT('',(-1.8,-2.11,0.825));+#17413 = VECTOR('',#17414,1.);+#17414 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#17415 = PCURVE('',#1761,#17416);+#17416 = DEFINITIONAL_REPRESENTATION('',(#17417),#17421);+#17417 = LINE('',#17418,#17419);+#17418 = CARTESIAN_POINT('',(0.276046862197,0.62560961319));+#17419 = VECTOR('',#17420,1.);+#17420 = DIRECTION('',(0.,-1.));+#17421 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17422 = PCURVE('',#474,#17423);+#17423 = DEFINITIONAL_REPRESENTATION('',(#17424),#17428);+#17424 = LINE('',#17425,#17426);+#17425 = CARTESIAN_POINT('',(0.,0.));+#17426 = VECTOR('',#17427,1.);+#17427 = DIRECTION('',(1.,0.));+#17428 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17429 = ORIENTED_EDGE('',*,*,#17331,.T.);+#17430 = ORIENTED_EDGE('',*,*,#17282,.T.);+#17431 = ORIENTED_EDGE('',*,*,#17207,.T.);+#17432 = ORIENTED_EDGE('',*,*,#17183,.T.);+#17433 = ORIENTED_EDGE('',*,*,#17134,.T.);+#17434 = ORIENTED_EDGE('',*,*,#17085,.T.);+#17435 = ORIENTED_EDGE('',*,*,#17031,.T.);+#17436 = ORIENTED_EDGE('',*,*,#16982,.T.);+#17437 = ORIENTED_EDGE('',*,*,#17360,.T.);+#17438 = ORIENTED_EDGE('',*,*,#1745,.T.);+#17439 = ADVANCED_FACE('',(#17440),#1618,.T.);+#17440 = FACE_BOUND('',#17441,.T.);+#17441 = EDGE_LOOP('',(#17442,#17463,#17486,#17519,#17547,#17576,#17604,+ #17632,#17660,#17693,#17721,#17743));+#17442 = ORIENTED_EDGE('',*,*,#17443,.F.);+#17443 = EDGE_CURVE('',#803,#1603,#17444,.T.);+#17444 = SURFACE_CURVE('',#17445,(#17449,#17456),.PCURVE_S1.);+#17445 = LINE('',#17446,#17447);+#17446 = CARTESIAN_POINT('',(1.95,-2.11,0.786976568901));+#17447 = VECTOR('',#17448,1.);+#17448 = DIRECTION('',(0.,0.,1.));+#17449 = PCURVE('',#1618,#17450);+#17450 = DEFINITIONAL_REPRESENTATION('',(#17451),#17455);+#17451 = LINE('',#17452,#17453);+#17452 = CARTESIAN_POINT('',(0.238023431098,0.47560961319));+#17453 = VECTOR('',#17454,1.);+#17454 = DIRECTION('',(1.,0.));+#17455 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17456 = PCURVE('',#818,#17457);+#17457 = DEFINITIONAL_REPRESENTATION('',(#17458),#17462);+#17458 = LINE('',#17459,#17460);+#17459 = CARTESIAN_POINT('',(4.385,-0.238023431099));+#17460 = VECTOR('',#17461,1.);+#17461 = DIRECTION('',(0.,1.));+#17462 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17463 = ORIENTED_EDGE('',*,*,#17464,.T.);+#17464 = EDGE_CURVE('',#803,#17465,#17467,.T.);+#17465 = VERTEX_POINT('',#17466);+#17466 = CARTESIAN_POINT('',(2.25,-2.11,0.825));+#17467 = SURFACE_CURVE('',#17468,(#17472,#17479),.PCURVE_S1.);+#17468 = LINE('',#17469,#17470);+#17469 = CARTESIAN_POINT('',(1.8,-2.11,0.825));+#17470 = VECTOR('',#17471,1.);+#17471 = DIRECTION('',(1.,1.110223024625E-16,0.));+#17472 = PCURVE('',#1618,#17473);+#17473 = DEFINITIONAL_REPRESENTATION('',(#17474),#17478);+#17474 = LINE('',#17475,#17476);+#17475 = CARTESIAN_POINT('',(0.276046862197,0.62560961319));+#17476 = VECTOR('',#17477,1.);+#17477 = DIRECTION('',(0.,-1.));+#17478 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17479 = PCURVE('',#846,#17480);+#17480 = DEFINITIONAL_REPRESENTATION('',(#17481),#17485);+#17481 = LINE('',#17482,#17483);+#17482 = CARTESIAN_POINT('',(-4.551914400962E-17,-0.41));+#17483 = VECTOR('',#17484,1.);+#17484 = DIRECTION('',(1.,0.));+#17485 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17486 = ORIENTED_EDGE('',*,*,#17487,.T.);+#17487 = EDGE_CURVE('',#17465,#17488,#17490,.T.);+#17488 = VERTEX_POINT('',#17489);+#17489 = CARTESIAN_POINT('',(2.348480775301,-2.11,0.742364817767));+#17490 = SURFACE_CURVE('',#17491,(#17496,#17507),.PCURVE_S1.);+#17491 = CIRCLE('',#17492,0.1);+#17492 = AXIS2_PLACEMENT_3D('',#17493,#17494,#17495);+#17493 = CARTESIAN_POINT('',(2.25,-2.11,0.725));+#17494 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#17495 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.));+#17496 = PCURVE('',#1618,#17497);+#17497 = DEFINITIONAL_REPRESENTATION('',(#17498),#17506);+#17498 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#17499,#17500,#17501,#17502+ ,#17503,#17504,#17505),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#17499 = CARTESIAN_POINT('',(0.276046862197,0.17560961319));+#17500 = CARTESIAN_POINT('',(0.276046862197,2.404532433112E-03));+#17501 = CARTESIAN_POINT('',(0.126046862197,8.900707281156E-02));+#17502 = CARTESIAN_POINT('',(-2.3953137803E-02,0.17560961319));+#17503 = CARTESIAN_POINT('',(0.126046862197,0.262212153568));+#17504 = CARTESIAN_POINT('',(0.276046862197,0.348814693947));+#17505 = CARTESIAN_POINT('',(0.276046862197,0.17560961319));+#17506 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17507 = PCURVE('',#17508,#17513);+#17508 = CYLINDRICAL_SURFACE('',#17509,0.1);+#17509 = AXIS2_PLACEMENT_3D('',#17510,#17511,#17512);+#17510 = CARTESIAN_POINT('',(2.25,-1.7,0.725));+#17511 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#17512 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.));+#17513 = DEFINITIONAL_REPRESENTATION('',(#17514),#17518);+#17514 = LINE('',#17515,#17516);+#17515 = CARTESIAN_POINT('',(0.,-0.41));+#17516 = VECTOR('',#17517,1.);+#17517 = DIRECTION('',(1.,0.));+#17518 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17519 = ORIENTED_EDGE('',*,*,#17520,.T.);+#17520 = EDGE_CURVE('',#17488,#17521,#17523,.T.);+#17521 = VERTEX_POINT('',#17522);+#17522 = CARTESIAN_POINT('',(2.429496640897,-2.11,0.2479055467));+#17523 = SURFACE_CURVE('',#17524,(#17528,#17535),.PCURVE_S1.);+#17524 = LINE('',#17525,#17526);+#17525 = CARTESIAN_POINT('',(2.348480775301,-2.11,0.742364817767));+#17526 = VECTOR('',#17527,1.);+#17527 = DIRECTION('',(0.161691392282,1.795135065956E-17,-0.986841372087+ ));+#17528 = PCURVE('',#1618,#17529);+#17529 = DEFINITIONAL_REPRESENTATION('',(#17530),#17534);+#17530 = LINE('',#17531,#17532);+#17531 = CARTESIAN_POINT('',(0.193411679964,7.7128837889E-02));+#17532 = VECTOR('',#17533,1.);+#17533 = DIRECTION('',(-0.986841372087,-0.161691392282));+#17534 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17535 = PCURVE('',#17536,#17541);+#17536 = PLANE('',#17537);+#17537 = AXIS2_PLACEMENT_3D('',#17538,#17539,#17540);+#17538 = CARTESIAN_POINT('',(2.348480775301,-1.7,0.742364817767));+#17539 = DIRECTION('',(0.986841372087,1.095614012943E-16,0.161691392282)+ );+#17540 = DIRECTION('',(0.161691392282,1.795135065956E-17,-0.986841372087+ ));+#17541 = DEFINITIONAL_REPRESENTATION('',(#17542),#17546);+#17542 = LINE('',#17543,#17544);+#17543 = CARTESIAN_POINT('',(-7.360053770421E-18,-0.41));+#17544 = VECTOR('',#17545,1.);+#17545 = DIRECTION('',(1.,-1.454264753163E-33));+#17546 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17547 = ORIENTED_EDGE('',*,*,#17548,.T.);+#17548 = EDGE_CURVE('',#17521,#17549,#17551,.T.);+#17549 = VERTEX_POINT('',#17550);+#17550 = CARTESIAN_POINT('',(2.724938966801,-2.11,-1.665334536938E-16));+#17551 = SURFACE_CURVE('',#17552,(#17557,#17564),.PCURVE_S1.);+#17552 = CIRCLE('',#17553,0.3);+#17553 = AXIS2_PLACEMENT_3D('',#17554,#17555,#17556);+#17554 = CARTESIAN_POINT('',(2.724938966801,-2.11,0.3));+#17555 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#17556 = DIRECTION('',(-0.984807753012,-1.093356242223E-16,+ -0.173648177667));+#17557 = PCURVE('',#1618,#17558);+#17558 = DEFINITIONAL_REPRESENTATION('',(#17559),#17563);+#17559 = CIRCLE('',#17560,0.3);+#17560 = AXIS2_PLACEMENT_2D('',#17561,#17562);+#17561 = CARTESIAN_POINT('',(-0.248953137803,-0.299329353611));+#17562 = DIRECTION('',(-0.173648177667,0.984807753012));+#17563 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17564 = PCURVE('',#17565,#17570);+#17565 = CYLINDRICAL_SURFACE('',#17566,0.3);+#17566 = AXIS2_PLACEMENT_3D('',#17567,#17568,#17569);+#17567 = CARTESIAN_POINT('',(2.724938966801,-1.7,0.3));+#17568 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#17569 = DIRECTION('',(-0.984807753012,-1.093356242223E-16,+ -0.173648177667));+#17570 = DEFINITIONAL_REPRESENTATION('',(#17571),#17575);+#17571 = LINE('',#17572,#17573);+#17572 = CARTESIAN_POINT('',(6.28318530718,-0.41));+#17573 = VECTOR('',#17574,1.);+#17574 = DIRECTION('',(-1.,0.));+#17575 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17576 = ORIENTED_EDGE('',*,*,#17577,.T.);+#17577 = EDGE_CURVE('',#17549,#17578,#17580,.T.);+#17578 = VERTEX_POINT('',#17579);+#17579 = CARTESIAN_POINT('',(3.,-2.11,-1.665334536938E-16));+#17580 = SURFACE_CURVE('',#17581,(#17585,#17592),.PCURVE_S1.);+#17581 = LINE('',#17582,#17583);+#17582 = CARTESIAN_POINT('',(2.724938966801,-2.11,-1.665334536938E-16));+#17583 = VECTOR('',#17584,1.);+#17584 = DIRECTION('',(1.,1.110223024625E-16,0.));+#17585 = PCURVE('',#1618,#17586);+#17586 = DEFINITIONAL_REPRESENTATION('',(#17587),#17591);+#17587 = LINE('',#17588,#17589);+#17588 = CARTESIAN_POINT('',(-0.548953137803,-0.299329353611));+#17589 = VECTOR('',#17590,1.);+#17590 = DIRECTION('',(0.,-1.));+#17591 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17592 = PCURVE('',#17593,#17598);+#17593 = PLANE('',#17594);+#17594 = AXIS2_PLACEMENT_3D('',#17595,#17596,#17597);+#17595 = CARTESIAN_POINT('',(2.724938966801,-1.7,-1.665334536938E-16));+#17596 = DIRECTION('',(0.,0.,1.));+#17597 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#17598 = DEFINITIONAL_REPRESENTATION('',(#17599),#17603);+#17599 = LINE('',#17600,#17601);+#17600 = CARTESIAN_POINT('',(-4.551914400962E-17,-0.41));+#17601 = VECTOR('',#17602,1.);+#17602 = DIRECTION('',(1.,0.));+#17603 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17604 = ORIENTED_EDGE('',*,*,#17605,.T.);+#17605 = EDGE_CURVE('',#17578,#17606,#17608,.T.);+#17606 = VERTEX_POINT('',#17607);+#17607 = CARTESIAN_POINT('',(3.,-2.11,0.2));+#17608 = SURFACE_CURVE('',#17609,(#17613,#17620),.PCURVE_S1.);+#17609 = LINE('',#17610,#17611);+#17610 = CARTESIAN_POINT('',(3.,-2.11,-1.665334536938E-16));+#17611 = VECTOR('',#17612,1.);+#17612 = DIRECTION('',(0.,0.,1.));+#17613 = PCURVE('',#1618,#17614);+#17614 = DEFINITIONAL_REPRESENTATION('',(#17615),#17619);+#17615 = LINE('',#17616,#17617);+#17616 = CARTESIAN_POINT('',(-0.548953137803,-0.57439038681));+#17617 = VECTOR('',#17618,1.);+#17618 = DIRECTION('',(1.,0.));+#17619 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17620 = PCURVE('',#17621,#17626);+#17621 = PLANE('',#17622);+#17622 = AXIS2_PLACEMENT_3D('',#17623,#17624,#17625);+#17623 = CARTESIAN_POINT('',(3.,-1.7,-1.665334536938E-16));+#17624 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#17625 = DIRECTION('',(0.,0.,1.));+#17626 = DEFINITIONAL_REPRESENTATION('',(#17627),#17631);+#17627 = LINE('',#17628,#17629);+#17628 = CARTESIAN_POINT('',(0.,-0.41));+#17629 = VECTOR('',#17630,1.);+#17630 = DIRECTION('',(1.,0.));+#17631 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17632 = ORIENTED_EDGE('',*,*,#17633,.T.);+#17633 = EDGE_CURVE('',#17606,#17634,#17636,.T.);+#17634 = VERTEX_POINT('',#17635);+#17635 = CARTESIAN_POINT('',(2.724938966801,-2.11,0.2));+#17636 = SURFACE_CURVE('',#17637,(#17641,#17648),.PCURVE_S1.);+#17637 = LINE('',#17638,#17639);+#17638 = CARTESIAN_POINT('',(3.,-2.11,0.2));+#17639 = VECTOR('',#17640,1.);+#17640 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#17641 = PCURVE('',#1618,#17642);+#17642 = DEFINITIONAL_REPRESENTATION('',(#17643),#17647);+#17643 = LINE('',#17644,#17645);+#17644 = CARTESIAN_POINT('',(-0.348953137803,-0.57439038681));+#17645 = VECTOR('',#17646,1.);+#17646 = DIRECTION('',(0.,1.));+#17647 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17648 = PCURVE('',#17649,#17654);+#17649 = PLANE('',#17650);+#17650 = AXIS2_PLACEMENT_3D('',#17651,#17652,#17653);+#17651 = CARTESIAN_POINT('',(3.,-1.7,0.2));+#17652 = DIRECTION('',(0.,0.,-1.));+#17653 = DIRECTION('',(-1.,-1.110223024625E-16,-0.));+#17654 = DEFINITIONAL_REPRESENTATION('',(#17655),#17659);+#17655 = LINE('',#17656,#17657);+#17656 = CARTESIAN_POINT('',(4.551914400962E-17,-0.41));+#17657 = VECTOR('',#17658,1.);+#17658 = DIRECTION('',(1.,0.));+#17659 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17660 = ORIENTED_EDGE('',*,*,#17661,.T.);+#17661 = EDGE_CURVE('',#17634,#17662,#17664,.T.);+#17662 = VERTEX_POINT('',#17663);+#17663 = CARTESIAN_POINT('',(2.6264581915,-2.11,0.282635182233));+#17664 = SURFACE_CURVE('',#17665,(#17670,#17681),.PCURVE_S1.);+#17665 = CIRCLE('',#17666,0.1);+#17666 = AXIS2_PLACEMENT_3D('',#17667,#17668,#17669);+#17667 = CARTESIAN_POINT('',(2.724938966801,-2.11,0.3));+#17668 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#17669 = DIRECTION('',(0.,0.,-1.));+#17670 = PCURVE('',#1618,#17671);+#17671 = DEFINITIONAL_REPRESENTATION('',(#17672),#17680);+#17672 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#17673,#17674,#17675,#17676+ ,#17677,#17678,#17679),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#17673 = CARTESIAN_POINT('',(-0.348953137803,-0.299329353611));+#17674 = CARTESIAN_POINT('',(-0.348953137803,-0.126124272854));+#17675 = CARTESIAN_POINT('',(-0.198953137803,-0.212726813233));+#17676 = CARTESIAN_POINT('',(-4.8953137803E-02,-0.299329353611));+#17677 = CARTESIAN_POINT('',(-0.198953137803,-0.385931893989));+#17678 = CARTESIAN_POINT('',(-0.348953137803,-0.472534434368));+#17679 = CARTESIAN_POINT('',(-0.348953137803,-0.299329353611));+#17680 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17681 = PCURVE('',#17682,#17687);+#17682 = CYLINDRICAL_SURFACE('',#17683,0.1);+#17683 = AXIS2_PLACEMENT_3D('',#17684,#17685,#17686);+#17684 = CARTESIAN_POINT('',(2.724938966801,-1.7,0.3));+#17685 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#17686 = DIRECTION('',(0.,0.,-1.));+#17687 = DEFINITIONAL_REPRESENTATION('',(#17688),#17692);+#17688 = LINE('',#17689,#17690);+#17689 = CARTESIAN_POINT('',(0.,-0.41));+#17690 = VECTOR('',#17691,1.);+#17691 = DIRECTION('',(1.,0.));+#17692 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17693 = ORIENTED_EDGE('',*,*,#17694,.T.);+#17694 = EDGE_CURVE('',#17662,#17695,#17697,.T.);+#17695 = VERTEX_POINT('',#17696);+#17696 = CARTESIAN_POINT('',(2.545442325904,-2.11,0.7770944533));+#17697 = SURFACE_CURVE('',#17698,(#17702,#17709),.PCURVE_S1.);+#17698 = LINE('',#17699,#17700);+#17699 = CARTESIAN_POINT('',(2.6264581915,-2.11,0.282635182233));+#17700 = VECTOR('',#17701,1.);+#17701 = DIRECTION('',(-0.161691392282,-1.795135065956E-17,+ 0.986841372087));+#17702 = PCURVE('',#1618,#17703);+#17703 = DEFINITIONAL_REPRESENTATION('',(#17704),#17708);+#17704 = LINE('',#17705,#17706);+#17705 = CARTESIAN_POINT('',(-0.26631795557,-0.20084857831));+#17706 = VECTOR('',#17707,1.);+#17707 = DIRECTION('',(0.986841372087,0.161691392282));+#17708 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17709 = PCURVE('',#17710,#17715);+#17710 = PLANE('',#17711);+#17711 = AXIS2_PLACEMENT_3D('',#17712,#17713,#17714);+#17712 = CARTESIAN_POINT('',(2.6264581915,-1.7,0.282635182233));+#17713 = DIRECTION('',(-0.986841372087,-1.095614012943E-16,+ -0.161691392282));+#17714 = DIRECTION('',(-0.161691392282,-1.795135065956E-17,+ 0.986841372087));+#17715 = DEFINITIONAL_REPRESENTATION('',(#17716),#17720);+#17716 = LINE('',#17717,#17718);+#17717 = CARTESIAN_POINT('',(7.360053770421E-18,-0.41));+#17718 = VECTOR('',#17719,1.);+#17719 = DIRECTION('',(1.,1.454264753163E-33));+#17720 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17721 = ORIENTED_EDGE('',*,*,#17722,.T.);+#17722 = EDGE_CURVE('',#17695,#1575,#17723,.T.);+#17723 = SURFACE_CURVE('',#17724,(#17729,#17736),.PCURVE_S1.);+#17724 = CIRCLE('',#17725,0.3);+#17725 = AXIS2_PLACEMENT_3D('',#17726,#17727,#17728);+#17726 = CARTESIAN_POINT('',(2.25,-2.11,0.725));+#17727 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#17728 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667)+ );+#17729 = PCURVE('',#1618,#17730);+#17730 = DEFINITIONAL_REPRESENTATION('',(#17731),#17735);+#17731 = CIRCLE('',#17732,0.3);+#17732 = AXIS2_PLACEMENT_2D('',#17733,#17734);+#17733 = CARTESIAN_POINT('',(0.176046862197,0.17560961319));+#17734 = DIRECTION('',(0.173648177667,-0.984807753012));+#17735 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17736 = PCURVE('',#1590,#17737);+#17737 = DEFINITIONAL_REPRESENTATION('',(#17738),#17742);+#17738 = LINE('',#17739,#17740);+#17739 = CARTESIAN_POINT('',(6.28318530718,-0.41));+#17740 = VECTOR('',#17741,1.);+#17741 = DIRECTION('',(-1.,0.));+#17742 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17743 = ORIENTED_EDGE('',*,*,#1602,.T.);+#17744 = ADVANCED_FACE('',(#17745),#17710,.F.);+#17745 = FACE_BOUND('',#17746,.F.);+#17746 = EDGE_LOOP('',(#17747,#17770,#17771,#17794));+#17747 = ORIENTED_EDGE('',*,*,#17748,.T.);+#17748 = EDGE_CURVE('',#17749,#17662,#17751,.T.);+#17749 = VERTEX_POINT('',#17750);+#17750 = CARTESIAN_POINT('',(2.6264581915,-1.7,0.282635182233));+#17751 = SURFACE_CURVE('',#17752,(#17756,#17763),.PCURVE_S1.);+#17752 = LINE('',#17753,#17754);+#17753 = CARTESIAN_POINT('',(2.6264581915,-1.7,0.282635182233));+#17754 = VECTOR('',#17755,1.);+#17755 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#17756 = PCURVE('',#17710,#17757);+#17757 = DEFINITIONAL_REPRESENTATION('',(#17758),#17762);+#17758 = LINE('',#17759,#17760);+#17759 = CARTESIAN_POINT('',(0.,0.));+#17760 = VECTOR('',#17761,1.);+#17761 = DIRECTION('',(5.505756095676E-29,-1.));+#17762 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17763 = PCURVE('',#17682,#17764);+#17764 = DEFINITIONAL_REPRESENTATION('',(#17765),#17769);+#17765 = LINE('',#17766,#17767);+#17766 = CARTESIAN_POINT('',(1.396263401592,0.));+#17767 = VECTOR('',#17768,1.);+#17768 = DIRECTION('',(1.624716621403E-15,-1.));+#17769 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17770 = ORIENTED_EDGE('',*,*,#17694,.T.);+#17771 = ORIENTED_EDGE('',*,*,#17772,.F.);+#17772 = EDGE_CURVE('',#17773,#17695,#17775,.T.);+#17773 = VERTEX_POINT('',#17774);+#17774 = CARTESIAN_POINT('',(2.545442325904,-1.7,0.7770944533));+#17775 = SURFACE_CURVE('',#17776,(#17780,#17787),.PCURVE_S1.);+#17776 = LINE('',#17777,#17778);+#17777 = CARTESIAN_POINT('',(2.545442325904,-1.7,0.7770944533));+#17778 = VECTOR('',#17779,1.);+#17779 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#17780 = PCURVE('',#17710,#17781);+#17781 = DEFINITIONAL_REPRESENTATION('',(#17782),#17786);+#17782 = LINE('',#17783,#17784);+#17783 = CARTESIAN_POINT('',(0.501052433606,8.994567934487E-18));+#17784 = VECTOR('',#17785,1.);+#17785 = DIRECTION('',(5.505756095676E-29,-1.));+#17786 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17787 = PCURVE('',#1590,#17788);+#17788 = DEFINITIONAL_REPRESENTATION('',(#17789),#17793);+#17789 = LINE('',#17790,#17791);+#17790 = CARTESIAN_POINT('',(6.28318530718,0.));+#17791 = VECTOR('',#17792,1.);+#17792 = DIRECTION('',(0.,-1.));+#17793 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17794 = ORIENTED_EDGE('',*,*,#17795,.F.);+#17795 = EDGE_CURVE('',#17749,#17773,#17796,.T.);+#17796 = SURFACE_CURVE('',#17797,(#17801,#17808),.PCURVE_S1.);+#17797 = LINE('',#17798,#17799);+#17798 = CARTESIAN_POINT('',(2.6264581915,-1.7,0.282635182233));+#17799 = VECTOR('',#17800,1.);+#17800 = DIRECTION('',(-0.161691392282,-1.795135065956E-17,+ 0.986841372087));+#17801 = PCURVE('',#17710,#17802);+#17802 = DEFINITIONAL_REPRESENTATION('',(#17803),#17807);+#17803 = LINE('',#17804,#17805);+#17804 = CARTESIAN_POINT('',(0.,0.));+#17805 = VECTOR('',#17806,1.);+#17806 = DIRECTION('',(1.,1.454264753163E-33));+#17807 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17808 = PCURVE('',#1562,#17809);+#17809 = DEFINITIONAL_REPRESENTATION('',(#17810),#17814);+#17810 = LINE('',#17811,#17812);+#17811 = CARTESIAN_POINT('',(-0.26631795557,-0.20084857831));+#17812 = VECTOR('',#17813,1.);+#17813 = DIRECTION('',(0.986841372087,0.161691392282));+#17814 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17815 = ADVANCED_FACE('',(#17816),#17682,.F.);+#17816 = FACE_BOUND('',#17817,.F.);+#17817 = EDGE_LOOP('',(#17818,#17841,#17842,#17843));+#17818 = ORIENTED_EDGE('',*,*,#17819,.T.);+#17819 = EDGE_CURVE('',#17820,#17634,#17822,.T.);+#17820 = VERTEX_POINT('',#17821);+#17821 = CARTESIAN_POINT('',(2.724938966801,-1.7,0.2));+#17822 = SURFACE_CURVE('',#17823,(#17827,#17834),.PCURVE_S1.);+#17823 = LINE('',#17824,#17825);+#17824 = CARTESIAN_POINT('',(2.724938966801,-1.7,0.2));+#17825 = VECTOR('',#17826,1.);+#17826 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#17827 = PCURVE('',#17682,#17828);+#17828 = DEFINITIONAL_REPRESENTATION('',(#17829),#17833);+#17829 = LINE('',#17830,#17831);+#17830 = CARTESIAN_POINT('',(0.,0.));+#17831 = VECTOR('',#17832,1.);+#17832 = DIRECTION('',(0.,-1.));+#17833 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17834 = PCURVE('',#17649,#17835);+#17835 = DEFINITIONAL_REPRESENTATION('',(#17836),#17840);+#17836 = LINE('',#17837,#17838);+#17837 = CARTESIAN_POINT('',(0.275061033199,3.053790922347E-17));+#17838 = VECTOR('',#17839,1.);+#17839 = DIRECTION('',(0.,-1.));+#17840 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17841 = ORIENTED_EDGE('',*,*,#17661,.T.);+#17842 = ORIENTED_EDGE('',*,*,#17748,.F.);+#17843 = ORIENTED_EDGE('',*,*,#17844,.F.);+#17844 = EDGE_CURVE('',#17820,#17749,#17845,.T.);+#17845 = SURFACE_CURVE('',#17846,(#17851,#17858),.PCURVE_S1.);+#17846 = CIRCLE('',#17847,0.1);+#17847 = AXIS2_PLACEMENT_3D('',#17848,#17849,#17850);+#17848 = CARTESIAN_POINT('',(2.724938966801,-1.7,0.3));+#17849 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#17850 = DIRECTION('',(0.,0.,-1.));+#17851 = PCURVE('',#17682,#17852);+#17852 = DEFINITIONAL_REPRESENTATION('',(#17853),#17857);+#17853 = LINE('',#17854,#17855);+#17854 = CARTESIAN_POINT('',(0.,0.));+#17855 = VECTOR('',#17856,1.);+#17856 = DIRECTION('',(1.,0.));+#17857 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17858 = PCURVE('',#1562,#17859);+#17859 = DEFINITIONAL_REPRESENTATION('',(#17860),#17868);+#17860 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#17861,#17862,#17863,#17864+ ,#17865,#17866,#17867),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#17861 = CARTESIAN_POINT('',(-0.348953137803,-0.299329353611));+#17862 = CARTESIAN_POINT('',(-0.348953137803,-0.126124272854));+#17863 = CARTESIAN_POINT('',(-0.198953137803,-0.212726813233));+#17864 = CARTESIAN_POINT('',(-4.8953137803E-02,-0.299329353611));+#17865 = CARTESIAN_POINT('',(-0.198953137803,-0.385931893989));+#17866 = CARTESIAN_POINT('',(-0.348953137803,-0.472534434368));+#17867 = CARTESIAN_POINT('',(-0.348953137803,-0.299329353611));+#17868 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17869 = ADVANCED_FACE('',(#17870),#17649,.F.);+#17870 = FACE_BOUND('',#17871,.F.);+#17871 = EDGE_LOOP('',(#17872,#17895,#17896,#17897));+#17872 = ORIENTED_EDGE('',*,*,#17873,.T.);+#17873 = EDGE_CURVE('',#17874,#17606,#17876,.T.);+#17874 = VERTEX_POINT('',#17875);+#17875 = CARTESIAN_POINT('',(3.,-1.7,0.2));+#17876 = SURFACE_CURVE('',#17877,(#17881,#17888),.PCURVE_S1.);+#17877 = LINE('',#17878,#17879);+#17878 = CARTESIAN_POINT('',(3.,-1.7,0.2));+#17879 = VECTOR('',#17880,1.);+#17880 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#17881 = PCURVE('',#17649,#17882);+#17882 = DEFINITIONAL_REPRESENTATION('',(#17883),#17887);+#17883 = LINE('',#17884,#17885);+#17884 = CARTESIAN_POINT('',(-0.,0.));+#17885 = VECTOR('',#17886,1.);+#17886 = DIRECTION('',(0.,-1.));+#17887 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17888 = PCURVE('',#17621,#17889);+#17889 = DEFINITIONAL_REPRESENTATION('',(#17890),#17894);+#17890 = LINE('',#17891,#17892);+#17891 = CARTESIAN_POINT('',(0.2,0.));+#17892 = VECTOR('',#17893,1.);+#17893 = DIRECTION('',(0.,-1.));+#17894 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17895 = ORIENTED_EDGE('',*,*,#17633,.T.);+#17896 = ORIENTED_EDGE('',*,*,#17819,.F.);+#17897 = ORIENTED_EDGE('',*,*,#17898,.F.);+#17898 = EDGE_CURVE('',#17874,#17820,#17899,.T.);+#17899 = SURFACE_CURVE('',#17900,(#17904,#17911),.PCURVE_S1.);+#17900 = LINE('',#17901,#17902);+#17901 = CARTESIAN_POINT('',(3.,-1.7,0.2));+#17902 = VECTOR('',#17903,1.);+#17903 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#17904 = PCURVE('',#17649,#17905);+#17905 = DEFINITIONAL_REPRESENTATION('',(#17906),#17910);+#17906 = LINE('',#17907,#17908);+#17907 = CARTESIAN_POINT('',(-0.,0.));+#17908 = VECTOR('',#17909,1.);+#17909 = DIRECTION('',(1.,0.));+#17910 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17911 = PCURVE('',#1562,#17912);+#17912 = DEFINITIONAL_REPRESENTATION('',(#17913),#17917);+#17913 = LINE('',#17914,#17915);+#17914 = CARTESIAN_POINT('',(-0.348953137803,-0.57439038681));+#17915 = VECTOR('',#17916,1.);+#17916 = DIRECTION('',(0.,1.));+#17917 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17918 = ADVANCED_FACE('',(#17919),#17621,.F.);+#17919 = FACE_BOUND('',#17920,.F.);+#17920 = EDGE_LOOP('',(#17921,#17944,#17945,#17946));+#17921 = ORIENTED_EDGE('',*,*,#17922,.T.);+#17922 = EDGE_CURVE('',#17923,#17578,#17925,.T.);+#17923 = VERTEX_POINT('',#17924);+#17924 = CARTESIAN_POINT('',(3.,-1.7,-1.665334536938E-16));+#17925 = SURFACE_CURVE('',#17926,(#17930,#17937),.PCURVE_S1.);+#17926 = LINE('',#17927,#17928);+#17927 = CARTESIAN_POINT('',(3.,-1.7,-1.665334536938E-16));+#17928 = VECTOR('',#17929,1.);+#17929 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#17930 = PCURVE('',#17621,#17931);+#17931 = DEFINITIONAL_REPRESENTATION('',(#17932),#17936);+#17932 = LINE('',#17933,#17934);+#17933 = CARTESIAN_POINT('',(0.,0.));+#17934 = VECTOR('',#17935,1.);+#17935 = DIRECTION('',(0.,-1.));+#17936 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17937 = PCURVE('',#17593,#17938);+#17938 = DEFINITIONAL_REPRESENTATION('',(#17939),#17943);+#17939 = LINE('',#17940,#17941);+#17940 = CARTESIAN_POINT('',(0.275061033199,-3.053790922347E-17));+#17941 = VECTOR('',#17942,1.);+#17942 = DIRECTION('',(0.,-1.));+#17943 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17944 = ORIENTED_EDGE('',*,*,#17605,.T.);+#17945 = ORIENTED_EDGE('',*,*,#17873,.F.);+#17946 = ORIENTED_EDGE('',*,*,#17947,.F.);+#17947 = EDGE_CURVE('',#17923,#17874,#17948,.T.);+#17948 = SURFACE_CURVE('',#17949,(#17953,#17960),.PCURVE_S1.);+#17949 = LINE('',#17950,#17951);+#17950 = CARTESIAN_POINT('',(3.,-1.7,-1.665334536938E-16));+#17951 = VECTOR('',#17952,1.);+#17952 = DIRECTION('',(0.,0.,1.));+#17953 = PCURVE('',#17621,#17954);+#17954 = DEFINITIONAL_REPRESENTATION('',(#17955),#17959);+#17955 = LINE('',#17956,#17957);+#17956 = CARTESIAN_POINT('',(0.,0.));+#17957 = VECTOR('',#17958,1.);+#17958 = DIRECTION('',(1.,0.));+#17959 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17960 = PCURVE('',#1562,#17961);+#17961 = DEFINITIONAL_REPRESENTATION('',(#17962),#17966);+#17962 = LINE('',#17963,#17964);+#17963 = CARTESIAN_POINT('',(-0.548953137803,-0.57439038681));+#17964 = VECTOR('',#17965,1.);+#17965 = DIRECTION('',(1.,0.));+#17966 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17967 = ADVANCED_FACE('',(#17968),#17593,.F.);+#17968 = FACE_BOUND('',#17969,.F.);+#17969 = EDGE_LOOP('',(#17970,#17993,#17994,#17995));+#17970 = ORIENTED_EDGE('',*,*,#17971,.T.);+#17971 = EDGE_CURVE('',#17972,#17549,#17974,.T.);+#17972 = VERTEX_POINT('',#17973);+#17973 = CARTESIAN_POINT('',(2.724938966801,-1.7,-1.665334536938E-16));+#17974 = SURFACE_CURVE('',#17975,(#17979,#17986),.PCURVE_S1.);+#17975 = LINE('',#17976,#17977);+#17976 = CARTESIAN_POINT('',(2.724938966801,-1.7,-1.665334536938E-16));+#17977 = VECTOR('',#17978,1.);+#17978 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#17979 = PCURVE('',#17593,#17980);+#17980 = DEFINITIONAL_REPRESENTATION('',(#17981),#17985);+#17981 = LINE('',#17982,#17983);+#17982 = CARTESIAN_POINT('',(0.,0.));+#17983 = VECTOR('',#17984,1.);+#17984 = DIRECTION('',(0.,-1.));+#17985 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17986 = PCURVE('',#17565,#17987);+#17987 = DEFINITIONAL_REPRESENTATION('',(#17988),#17992);+#17988 = LINE('',#17989,#17990);+#17989 = CARTESIAN_POINT('',(4.886921905584,0.));+#17990 = VECTOR('',#17991,1.);+#17991 = DIRECTION('',(4.332577657074E-15,-1.));+#17992 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17993 = ORIENTED_EDGE('',*,*,#17577,.T.);+#17994 = ORIENTED_EDGE('',*,*,#17922,.F.);+#17995 = ORIENTED_EDGE('',*,*,#17996,.F.);+#17996 = EDGE_CURVE('',#17972,#17923,#17997,.T.);+#17997 = SURFACE_CURVE('',#17998,(#18002,#18009),.PCURVE_S1.);+#17998 = LINE('',#17999,#18000);+#17999 = CARTESIAN_POINT('',(2.724938966801,-1.7,-1.665334536938E-16));+#18000 = VECTOR('',#18001,1.);+#18001 = DIRECTION('',(1.,1.110223024625E-16,0.));+#18002 = PCURVE('',#17593,#18003);+#18003 = DEFINITIONAL_REPRESENTATION('',(#18004),#18008);+#18004 = LINE('',#18005,#18006);+#18005 = CARTESIAN_POINT('',(0.,0.));+#18006 = VECTOR('',#18007,1.);+#18007 = DIRECTION('',(1.,0.));+#18008 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18009 = PCURVE('',#1562,#18010);+#18010 = DEFINITIONAL_REPRESENTATION('',(#18011),#18015);+#18011 = LINE('',#18012,#18013);+#18012 = CARTESIAN_POINT('',(-0.548953137803,-0.299329353611));+#18013 = VECTOR('',#18014,1.);+#18014 = DIRECTION('',(0.,-1.));+#18015 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18016 = ADVANCED_FACE('',(#18017),#17565,.T.);+#18017 = FACE_BOUND('',#18018,.T.);+#18018 = EDGE_LOOP('',(#18019,#18043,#18044,#18045));+#18019 = ORIENTED_EDGE('',*,*,#18020,.T.);+#18020 = EDGE_CURVE('',#18021,#17972,#18023,.T.);+#18021 = VERTEX_POINT('',#18022);+#18022 = CARTESIAN_POINT('',(2.429496640897,-1.7,0.2479055467));+#18023 = SURFACE_CURVE('',#18024,(#18029,#18036),.PCURVE_S1.);+#18024 = CIRCLE('',#18025,0.3);+#18025 = AXIS2_PLACEMENT_3D('',#18026,#18027,#18028);+#18026 = CARTESIAN_POINT('',(2.724938966801,-1.7,0.3));+#18027 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#18028 = DIRECTION('',(-0.984807753012,-1.093356242223E-16,+ -0.173648177667));+#18029 = PCURVE('',#17565,#18030);+#18030 = DEFINITIONAL_REPRESENTATION('',(#18031),#18035);+#18031 = LINE('',#18032,#18033);+#18032 = CARTESIAN_POINT('',(6.28318530718,0.));+#18033 = VECTOR('',#18034,1.);+#18034 = DIRECTION('',(-1.,0.));+#18035 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18036 = PCURVE('',#1562,#18037);+#18037 = DEFINITIONAL_REPRESENTATION('',(#18038),#18042);+#18038 = CIRCLE('',#18039,0.3);+#18039 = AXIS2_PLACEMENT_2D('',#18040,#18041);+#18040 = CARTESIAN_POINT('',(-0.248953137803,-0.299329353611));+#18041 = DIRECTION('',(-0.173648177667,0.984807753012));+#18042 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18043 = ORIENTED_EDGE('',*,*,#17971,.T.);+#18044 = ORIENTED_EDGE('',*,*,#17548,.F.);+#18045 = ORIENTED_EDGE('',*,*,#18046,.F.);+#18046 = EDGE_CURVE('',#18021,#17521,#18047,.T.);+#18047 = SURFACE_CURVE('',#18048,(#18052,#18059),.PCURVE_S1.);+#18048 = LINE('',#18049,#18050);+#18049 = CARTESIAN_POINT('',(2.429496640897,-1.7,0.2479055467));+#18050 = VECTOR('',#18051,1.);+#18051 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#18052 = PCURVE('',#17565,#18053);+#18053 = DEFINITIONAL_REPRESENTATION('',(#18054),#18058);+#18054 = LINE('',#18055,#18056);+#18055 = CARTESIAN_POINT('',(6.28318530718,0.));+#18056 = VECTOR('',#18057,1.);+#18057 = DIRECTION('',(0.,-1.));+#18058 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18059 = PCURVE('',#17536,#18060);+#18060 = DEFINITIONAL_REPRESENTATION('',(#18061),#18065);+#18061 = LINE('',#18062,#18063);+#18062 = CARTESIAN_POINT('',(0.501052433606,-8.994567934487E-18));+#18063 = VECTOR('',#18064,1.);+#18064 = DIRECTION('',(-5.505756095676E-29,-1.));+#18065 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18066 = ADVANCED_FACE('',(#18067),#17536,.F.);+#18067 = FACE_BOUND('',#18068,.F.);+#18068 = EDGE_LOOP('',(#18069,#18092,#18093,#18094));+#18069 = ORIENTED_EDGE('',*,*,#18070,.T.);+#18070 = EDGE_CURVE('',#18071,#17488,#18073,.T.);+#18071 = VERTEX_POINT('',#18072);+#18072 = CARTESIAN_POINT('',(2.348480775301,-1.7,0.742364817767));+#18073 = SURFACE_CURVE('',#18074,(#18078,#18085),.PCURVE_S1.);+#18074 = LINE('',#18075,#18076);+#18075 = CARTESIAN_POINT('',(2.348480775301,-1.7,0.742364817767));+#18076 = VECTOR('',#18077,1.);+#18077 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#18078 = PCURVE('',#17536,#18079);+#18079 = DEFINITIONAL_REPRESENTATION('',(#18080),#18084);+#18080 = LINE('',#18081,#18082);+#18081 = CARTESIAN_POINT('',(0.,0.));+#18082 = VECTOR('',#18083,1.);+#18083 = DIRECTION('',(-5.505756095676E-29,-1.));+#18084 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18085 = PCURVE('',#17508,#18086);+#18086 = DEFINITIONAL_REPRESENTATION('',(#18087),#18091);+#18087 = LINE('',#18088,#18089);+#18088 = CARTESIAN_POINT('',(1.396263401592,0.));+#18089 = VECTOR('',#18090,1.);+#18090 = DIRECTION('',(-4.332577657074E-15,-1.));+#18091 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18092 = ORIENTED_EDGE('',*,*,#17520,.T.);+#18093 = ORIENTED_EDGE('',*,*,#18046,.F.);+#18094 = ORIENTED_EDGE('',*,*,#18095,.F.);+#18095 = EDGE_CURVE('',#18071,#18021,#18096,.T.);+#18096 = SURFACE_CURVE('',#18097,(#18101,#18108),.PCURVE_S1.);+#18097 = LINE('',#18098,#18099);+#18098 = CARTESIAN_POINT('',(2.348480775301,-1.7,0.742364817767));+#18099 = VECTOR('',#18100,1.);+#18100 = DIRECTION('',(0.161691392282,1.795135065956E-17,-0.986841372087+ ));+#18101 = PCURVE('',#17536,#18102);+#18102 = DEFINITIONAL_REPRESENTATION('',(#18103),#18107);+#18103 = LINE('',#18104,#18105);+#18104 = CARTESIAN_POINT('',(0.,0.));+#18105 = VECTOR('',#18106,1.);+#18106 = DIRECTION('',(1.,-1.454264753163E-33));+#18107 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18108 = PCURVE('',#1562,#18109);+#18109 = DEFINITIONAL_REPRESENTATION('',(#18110),#18114);+#18110 = LINE('',#18111,#18112);+#18111 = CARTESIAN_POINT('',(0.193411679964,7.7128837889E-02));+#18112 = VECTOR('',#18113,1.);+#18113 = DIRECTION('',(-0.986841372087,-0.161691392282));+#18114 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18115 = ADVANCED_FACE('',(#18116),#17508,.F.);+#18116 = FACE_BOUND('',#18117,.F.);+#18117 = EDGE_LOOP('',(#18118,#18141,#18142,#18143));+#18118 = ORIENTED_EDGE('',*,*,#18119,.T.);+#18119 = EDGE_CURVE('',#18120,#17465,#18122,.T.);+#18120 = VERTEX_POINT('',#18121);+#18121 = CARTESIAN_POINT('',(2.25,-1.7,0.825));+#18122 = SURFACE_CURVE('',#18123,(#18127,#18134),.PCURVE_S1.);+#18123 = LINE('',#18124,#18125);+#18124 = CARTESIAN_POINT('',(2.25,-1.7,0.825));+#18125 = VECTOR('',#18126,1.);+#18126 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#18127 = PCURVE('',#17508,#18128);+#18128 = DEFINITIONAL_REPRESENTATION('',(#18129),#18133);+#18129 = LINE('',#18130,#18131);+#18130 = CARTESIAN_POINT('',(0.,0.));+#18131 = VECTOR('',#18132,1.);+#18132 = DIRECTION('',(0.,-1.));+#18133 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18134 = PCURVE('',#846,#18135);+#18135 = DEFINITIONAL_REPRESENTATION('',(#18136),#18140);+#18136 = LINE('',#18137,#18138);+#18137 = CARTESIAN_POINT('',(0.45,-4.996003610812E-17));+#18138 = VECTOR('',#18139,1.);+#18139 = DIRECTION('',(0.,-1.));+#18140 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18141 = ORIENTED_EDGE('',*,*,#17487,.T.);+#18142 = ORIENTED_EDGE('',*,*,#18070,.F.);+#18143 = ORIENTED_EDGE('',*,*,#18144,.F.);+#18144 = EDGE_CURVE('',#18120,#18071,#18145,.T.);+#18145 = SURFACE_CURVE('',#18146,(#18151,#18158),.PCURVE_S1.);+#18146 = CIRCLE('',#18147,0.1);+#18147 = AXIS2_PLACEMENT_3D('',#18148,#18149,#18150);+#18148 = CARTESIAN_POINT('',(2.25,-1.7,0.725));+#18149 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#18150 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.));+#18151 = PCURVE('',#17508,#18152);+#18152 = DEFINITIONAL_REPRESENTATION('',(#18153),#18157);+#18153 = LINE('',#18154,#18155);+#18154 = CARTESIAN_POINT('',(0.,0.));+#18155 = VECTOR('',#18156,1.);+#18156 = DIRECTION('',(1.,0.));+#18157 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18158 = PCURVE('',#1562,#18159);+#18159 = DEFINITIONAL_REPRESENTATION('',(#18160),#18168);+#18160 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#18161,#18162,#18163,#18164+ ,#18165,#18166,#18167),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#18161 = CARTESIAN_POINT('',(0.276046862197,0.17560961319));+#18162 = CARTESIAN_POINT('',(0.276046862197,2.404532433112E-03));+#18163 = CARTESIAN_POINT('',(0.126046862197,8.900707281156E-02));+#18164 = CARTESIAN_POINT('',(-2.3953137803E-02,0.17560961319));+#18165 = CARTESIAN_POINT('',(0.126046862197,0.262212153568));+#18166 = CARTESIAN_POINT('',(0.276046862197,0.348814693947));+#18167 = CARTESIAN_POINT('',(0.276046862197,0.17560961319));+#18168 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18169 = ADVANCED_FACE('',(#18170),#1590,.T.);+#18170 = FACE_BOUND('',#18171,.T.);+#18171 = EDGE_LOOP('',(#18172,#18194,#18195,#18196));+#18172 = ORIENTED_EDGE('',*,*,#18173,.T.);+#18173 = EDGE_CURVE('',#17773,#1547,#18174,.T.);+#18174 = SURFACE_CURVE('',#18175,(#18180,#18187),.PCURVE_S1.);+#18175 = CIRCLE('',#18176,0.3);+#18176 = AXIS2_PLACEMENT_3D('',#18177,#18178,#18179);+#18177 = CARTESIAN_POINT('',(2.25,-1.7,0.725));+#18178 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#18179 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667)+ );+#18180 = PCURVE('',#1590,#18181);+#18181 = DEFINITIONAL_REPRESENTATION('',(#18182),#18186);+#18182 = LINE('',#18183,#18184);+#18183 = CARTESIAN_POINT('',(6.28318530718,0.));+#18184 = VECTOR('',#18185,1.);+#18185 = DIRECTION('',(-1.,0.));+#18186 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18187 = PCURVE('',#1562,#18188);+#18188 = DEFINITIONAL_REPRESENTATION('',(#18189),#18193);+#18189 = CIRCLE('',#18190,0.3);+#18190 = AXIS2_PLACEMENT_2D('',#18191,#18192);+#18191 = CARTESIAN_POINT('',(0.176046862197,0.17560961319));+#18192 = DIRECTION('',(0.173648177667,-0.984807753012));+#18193 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18194 = ORIENTED_EDGE('',*,*,#1574,.T.);+#18195 = ORIENTED_EDGE('',*,*,#17722,.F.);+#18196 = ORIENTED_EDGE('',*,*,#17772,.F.);+#18197 = ADVANCED_FACE('',(#18198),#1562,.F.);+#18198 = FACE_BOUND('',#18199,.F.);+#18199 = EDGE_LOOP('',(#18200,#18221,#18242,#18243,#18244,#18245,#18246,+ #18247,#18248,#18249,#18250,#18251));+#18200 = ORIENTED_EDGE('',*,*,#18201,.F.);+#18201 = EDGE_CURVE('',#831,#1524,#18202,.T.);+#18202 = SURFACE_CURVE('',#18203,(#18207,#18214),.PCURVE_S1.);+#18203 = LINE('',#18204,#18205);+#18204 = CARTESIAN_POINT('',(1.95,-1.7,0.786976568901));+#18205 = VECTOR('',#18206,1.);+#18206 = DIRECTION('',(0.,0.,1.));+#18207 = PCURVE('',#1562,#18208);+#18208 = DEFINITIONAL_REPRESENTATION('',(#18209),#18213);+#18209 = LINE('',#18210,#18211);+#18210 = CARTESIAN_POINT('',(0.238023431098,0.47560961319));+#18211 = VECTOR('',#18212,1.);+#18212 = DIRECTION('',(1.,0.));+#18213 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18214 = PCURVE('',#874,#18215);+#18215 = DEFINITIONAL_REPRESENTATION('',(#18216),#18220);+#18216 = LINE('',#18217,#18218);+#18217 = CARTESIAN_POINT('',(3.975,-0.238023431099));+#18218 = VECTOR('',#18219,1.);+#18219 = DIRECTION('',(0.,1.));+#18220 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18221 = ORIENTED_EDGE('',*,*,#18222,.T.);+#18222 = EDGE_CURVE('',#831,#18120,#18223,.T.);+#18223 = SURFACE_CURVE('',#18224,(#18228,#18235),.PCURVE_S1.);+#18224 = LINE('',#18225,#18226);+#18225 = CARTESIAN_POINT('',(1.8,-1.7,0.825));+#18226 = VECTOR('',#18227,1.);+#18227 = DIRECTION('',(1.,1.110223024625E-16,0.));+#18228 = PCURVE('',#1562,#18229);+#18229 = DEFINITIONAL_REPRESENTATION('',(#18230),#18234);+#18230 = LINE('',#18231,#18232);