main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers sn75176-td: viewers · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
sn75176-td-etched.glb Publish 0.1.0 · Ray
sn75176-td-etched.step sn75176-td: factory component page (tier=lcsc) · Ray
sn75176-td-hero.glb sn75176-td: hero GLB from the etched model (keeps the MPN mark) · Ray
sn75176-td-hero.overlay.json Publish 0.1.0 · Ray
sn75176-td.glb Publish 0.1.0 · Ray
sn75176-td.kicad_mod Publish 0.1.0 · Ray
sn75176-td.kicad_sym Publish 0.1.0 · Ray
sn75176-td.lbr Publish 0.1.0 · Ray
sn75176-td.step Publish 0.1.0 · Ray

SN75176-TD

TDSEMIC · RS-485 / RS-422 ICs · DIP-8

SN75176-TD from TDSEMIC, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RO output Receiver output, high when A is at least 200mV above B and low when A is 200mV below B; high-impedance when RE is high.
2 RE input Receiver enable, active low; when RE is high the receiver output is high-impedance.
3 DE input Driver enable, active high; when DE is low the driver outputs are high-impedance, and the chip is in receive mode when DE and RE are both low.
4 DI input Driver data input; DI low gives A high and B low, DI high gives the opposite.
5 GND power_in Ground, negative supply terminal.
6 A bidirectional Non-inverting receiver input and non-inverting driver output.
7 B bidirectional Inverting receiver input and inverting driver output.
8 Vcc power_in Positive power supply; absolute maximum +5V.

Key specifications

Parameter Value
Manufacturer TDSEMIC
Package DIP-8
Category Interface
Pins 8

CAD (KiCad official)

  • Symbol: SN75176-TD
  • Footprint: Package_DIP:DIP-8_W7.62mm
  • 3D model: DIP-8 (KiCad packages3D, STEP)
  • 3D model files: sn75176-td-etched.step / sn75176-td-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sn75176-td.step / sn75176-td.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: TDSEMIC datasheet (11 pp, sha256 3c9f1e99693b4885, retrieved 2026-10-14, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF