component
SN75172DWR
Public Made by Adomby adom
Texas Instruments RS-485 / RS-422 ICs, SOIC-20-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Initial commit: component/sn75172dwr
3ab02e9
SN75172DWR
Texas Instruments · RS-485 / RS-422 ICs · SOIC-20-300mil
SN75172DWR from Texas Instruments, in a SOIC-20-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1A | input | Data input for driver 1; VIH ≥ 2 V, VIL ≤ 0.8 V, VI max 5.5 V. |
| 2 | 1Y | tri_state | Non-inverting (positive) differential output of driver 1; VOH min 3.7 V, |
| 3 | NC | unconnected | No internal connection. |
| 4 | 1Z | tri_state | Inverting (negative) differential output of driver 1; VOL max 1.1 V, complementary to 1Y, tri-state when disabled. |
| 5 | G | input | Active-high enable input shared by all four drivers; H enables outputs, overridden to hi-Z by G̅ high. |
| 6 | 2Z | tri_state | Inverting (negative) differential output of driver 2; VOL max 1.1 V, complementary to 2Y, tri-state when disabled. |
| 7 | NC | unconnected | No internal connection. |
| 8 | 2Y | tri_state | Non-inverting (positive) differential output of driver 2; VOH min 3.7 V, |
| 9 | 2A | input | Data input for driver 2; VIH ≥ 2 V, VIL ≤ 0.8 V, VI max 5.5 V. |
| 10 | GND | power_in | Ground reference; all voltages referenced to this terminal. |
| 11 | 3A | input | Data input for driver 3; VIH ≥ 2 V, VIL ≤ 0.8 V, VI max 5.5 V. |
| 12 | 3Y | tri_state | Non-inverting (positive) differential output of driver 3; VOH min 3.7 V, |
| 13 | NC | unconnected | No internal connection. |
| 14 | 3Z | tri_state | Inverting (negative) differential output of driver 3; VOL max 1.1 V, complementary to 3Y, tri-state when disabled. |
| 15 | ~G | input | Active-low enable input shared by all four drivers; L enables outputs (with G high), H forces all outputs to high impedance. |
| 16 | 4Z | tri_state | Inverting (negative) differential output of driver 4; VOL max 1.1 V, complementary to 4Y, tri-state when disabled. |
| 17 | NC | unconnected | No internal connection. |
| 18 | 4Y | tri_state | Non-inverting (positive) differential output of driver 4; VOH min 3.7 V, |
| 19 | 4A | input | Data input for driver 4; VIH ≥ 2 V, VIL ≤ 0.8 V, VI max 5.5 V. |
| 20 | VCC | power_in | Supply voltage; recommended 4.75 V to 5.25 V, absolute maximum 7 V; ICC 38-60 mA (outputs enabled). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-20-300mil |
| Category | Interface |
| Pins | 20 |
CAD (KiCad official)
- Symbol:
SN75172DWR - Footprint:
Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm - 3D model: SOIC-20-300mil (KiCad packages3D, STEP)
- 3D model files:
sn75172dwr-etched.step/sn75172dwr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn75172dwr.step/sn75172dwr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (21 pp, sha256
b11e76d5a75a7caa, retrieved 2026-09-27, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-sonnet-4-6(text+vision), consensusclaude-opus-4-7(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# SN75172DWR
**Texas Instruments** · RS-485 / RS-422 ICs · SOIC-20-300mil
SN75172DWR from Texas Instruments, in a SOIC-20-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1A | input | Data input for driver 1; VIH ≥ 2 V, VIL ≤ 0.8 V, VI max 5.5 V. |
| 2 | 1Y | tri_state | Non-inverting (positive) differential output of driver 1; VOH min 3.7 V, |VOD| 1.5-6 V, IOH/IOL ±60 mA, tri-state when disabled. |
| 3 | NC | unconnected | No internal connection. |
| 4 | 1Z | tri_state | Inverting (negative) differential output of driver 1; VOL max 1.1 V, complementary to 1Y, tri-state when disabled. |
| 5 | G | input | Active-high enable input shared by all four drivers; H enables outputs, overridden to hi-Z by G̅ high. |
| 6 | 2Z | tri_state | Inverting (negative) differential output of driver 2; VOL max 1.1 V, complementary to 2Y, tri-state when disabled. |
| 7 | NC | unconnected | No internal connection. |
| 8 | 2Y | tri_state | Non-inverting (positive) differential output of driver 2; VOH min 3.7 V, |VOD| 1.5-6 V, IOH/IOL ±60 mA, tri-state when disabled. |
| 9 | 2A | input | Data input for driver 2; VIH ≥ 2 V, VIL ≤ 0.8 V, VI max 5.5 V. |
| 10 | GND | power_in | Ground reference; all voltages referenced to this terminal. |
| 11 | 3A | input | Data input for driver 3; VIH ≥ 2 V, VIL ≤ 0.8 V, VI max 5.5 V. |
| 12 | 3Y | tri_state | Non-inverting (positive) differential output of driver 3; VOH min 3.7 V, |VOD| 1.5-6 V, IOH/IOL ±60 mA, tri-state when disabled. |
| 13 | NC | unconnected | No internal connection. |
| 14 | 3Z | tri_state | Inverting (negative) differential output of driver 3; VOL max 1.1 V, complementary to 3Y, tri-state when disabled. |
| 15 | ~G | input | Active-low enable input shared by all four drivers; L enables outputs (with G high), H forces all outputs to high impedance. |
| 16 | 4Z | tri_state | Inverting (negative) differential output of driver 4; VOL max 1.1 V, complementary to 4Y, tri-state when disabled. |
| 17 | NC | unconnected | No internal connection. |
| 18 | 4Y | tri_state | Non-inverting (positive) differential output of driver 4; VOH min 3.7 V, |VOD| 1.5-6 V, IOH/IOL ±60 mA, tri-state when disabled. |
| 19 | 4A | input | Data input for driver 4; VIH ≥ 2 V, VIL ≤ 0.8 V, VI max 5.5 V. |
| 20 | VCC | power_in | Supply voltage; recommended 4.75 V to 5.25 V, absolute maximum 7 V; ICC 38-60 mA (outputs enabled). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-20-300mil |
| Category | Interface |
| Pins | 20 |
## CAD (KiCad official)
- Symbol: `SN75172DWR`
- Footprint: `Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm`
- 3D model: SOIC-20-300mil (KiCad packages3D, STEP)
- 3D model files: `sn75172dwr-etched.step` / `sn75172dwr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sn75172dwr.step` / `sn75172dwr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/sn75172) (21 pp, sha256 `b11e76d5a75a7caa`, retrieved 2026-09-27, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-sonnet-4-6` (text+vision), consensus `claude-opus-4-7` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/sn75172dwr-datasheet.pdf)