Generated by kicad-footprint-generator · KiCad file format 20260206
SN75108ADR
Texas Instruments · Interface - Specialized · SOIC-14
SN75108ADR from Texas Instruments, in a SOIC-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1A | input | Channel 1 noninverting (A) differential input, with recommended common-mode voltage within ±3 V and a differential threshold of ±25 mV. |
| 2 | 1B | input | Channel 1 inverting (B) differential input, with recommended common-mode voltage within ±3 V. |
| 3 | NC | unconnected | No internal connection. |
| 4 | 1Y | output | Channel 1 receiver output; the SN75108A uses an open-collector output circuit that can be wired in a dot-AND connection. |
| 5 | 1G | input | Channel 1 gate strobe input, with high-level input voltage 2 V to 5.5 V and low-level input voltage 0 V to 0.8 V. |
| 6 | S | input | Common strobe input shared by both channels, with high-level input voltage 2 V to 5.5 V and low-level input voltage 0 V to 0.8 V. |
| 7 | GND | power_in | Network ground terminal; all voltages except differential voltages are referenced to this terminal. |
| 8 | 2G | input | Channel 2 gate strobe input, with high-level input voltage 2 V to 5.5 V and low-level input voltage 0 V to 0.8 V. |
| 9 | 2Y | output | Channel 2 receiver output; the SN75108A uses an open-collector output circuit that can be wired in a dot-AND connection. |
| 10 | NC | unconnected | No internal connection. |
| 11 | 2B | input | Channel 2 inverting (B) differential input, with recommended common-mode voltage within ±3 V. |
| 12 | 2A | input | Channel 2 noninverting (A) differential input, with recommended common-mode voltage within ±3 V and a differential threshold of ±25 mV. |
| 13 | VCC- | power_in | Negative supply, recommended −4.75 V to −5.25 V for the SN75108A (nominal −5 V). |
| 14 | VCC+ | power_in | Positive supply, recommended 4.75 V to 5.25 V for the SN75108A (nominal 5 V). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-14 |
| Category | Interface |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage VCC+ | VCC+ | 4.75 | 5 | 5.25 | V | 4 | |
| Supply voltage VCC- | VCC- | -4.75 | -5 | -5.25 | V | 4 | |
| High-level input voltage between differential inputs | VIDH | 0.025 | 5 | V | 4 | ||
| Low-level input voltage between differential inputs | VIDL | -5 | -0.025 | V | 4 | ||
| Common-mode input voltage | VIC | -3 | 3 | V | 4 | ||
| Input voltage, any differential input to GND | -5 | 3 | V | 4 | |||
| High-level input voltage at strobe inputs | VIH(S) | 2 | 5.5 | V | 4 | ||
| Low-level input voltage at strobe inputs | VIL(S) | 0 | 0.8 | V | 4 | ||
| Low-level output current | IOL | -16 | mA | 4 | |||
| Operating free-air temperature | TA | 0 | 70 | °C | 4 | ||
| Supply voltage VCC+ (absolute maximum) | VCC+ | 7 | V | See Note 3 | 4 | ||
| Supply voltage VCC- (absolute maximum) | VCC- | -7 | V | See Note 3 | 4 | ||
| Differential input voltage | VID | -6 | 6 | V | See Note 4 | 4 | |
| Common-mode input voltage | VIC | -5 | 5 | V | See Note 5 | 4 | |
| Strobe input voltage | 5.5 | V | 4 | ||||
| Storage temperature range | Tstg | -65 | 150 | °C | 4 | ||
| Lead temperature (D package) | 260 | °C | 1,6 mm (1/16 inch) from case for 10 seconds | 4 | |||
| Continuous total dissipation (D package) | 950 | mW | TA ≤ 25°C | 4 | |||
| Power rating (D package) | 608 | mW | TA = 70°C | 4 | |||
| High-level output voltage | VOH | 2.4 | V | VCC± = MIN, VIDH = 25 mV, VIL(S) = 0.8 V, VIC = -3 V to 3 V, IOH = -400 µA | 6 | ||
| Low-level output voltage | VOL | 0.4 | V | VCC± = MIN, VIDL = -25 mV, VIH(S) = 2 V, VIC = -3 V to 3 V, IOL = 16 mA | 6 | ||
| High-level input current, input A | IIH | 30 | 75 | µA | VCC± = MAX, VID = 5 V | 6 | |
| High-level input current, input B | IIH | 30 | 75 | µA | VCC± = MAX, VID = -5 V | 6 | |
| Low-level input current, input A | IIL | -10 | µA | VCC± = MAX, VID = -5 V | 6 | ||
| Low-level input current, input B | IIL | -10 | µA | VCC± = MAX, VID = 5 V | 6 | ||
| High-level input current into 1G or 2G | IIH | 40 | µA | VCC± = MAX, VIH(G) = 2.4 V | 6 | ||
| High-level input current into 1G or 2G | IIH | 1 | mA | VCC± = MAX, VIH(G) = MAX | 6 | ||
| Low-level input current into 1G or 2G | IIL | -1.6 | mA | VCC± = MAX, VIL(G) = 0.4 V | 6 | ||
| High-level input current into S | IIH | 80 | µA | VCC± = MAX, VIH(S) = 2.4 V | 6 | ||
| High-level input current into S | IIH | 2 | mA | VCC± = MAX, VIH(S) = MAX | 6 | ||
| Low-level input current into S | IIL | -3.2 | mA | VCC± = MAX, VIL(S) = 0.4 V | 6 | ||
| High-level output current | IOH | 250 | µA | VCC± = MIN, VOH = MAX | 6 | ||
| Short-circuit output current | IOS | -18 | -70 | mA | VCC± = MAX | 6 | |
| Supply current from VCC+, outputs high | ICCH+ | 18 | 30 | mA | VCC± = MAX, TA = 25°C | 6 | |
| Supply current from VCC-, outputs high | ICCH- | -8.4 | -15 | mA | VCC± = MAX, TA = 25°C | 6 | |
| Propagation delay time, low- to high-level output, from differential inputs A and B | tPLH(D) | 25 | ns | VCC± = ±5 V, TA = 25°C, RL = 390 Ω, CL = 50 pF | 6 | ||
| Propagation delay time, high- to low-level output, from differential inputs A and B | tPHL(D) | 25 | ns | VCC± = ±5 V, TA = 25°C, RL = 390 Ω, CL = 50 pF | 6 | ||
| Propagation delay time, low- to high-level output, from strobe input G or S | tPLH(S) | 15 | ns | VCC± = ±5 V, TA = 25°C, RL = 390 Ω, CL = 50 pF | 6 | ||
| Propagation delay time, low- to high-level output, from strobe input G or S | tPLH(S) | 20 | ns | VCC± = ±5 V, TA = 25°C, RL = 390 Ω, CL = 15 pF | 6 | ||
| Propagation delay time, high- to low-level output, from strobe input G or S | tPHL(S) | 15 | ns | VCC± = ±5 V, TA = 25°C, RL = 390 Ω, CL = 50 pF | 6 | ||
| Propagation delay time, high- to low-level output, from strobe input G or S | tPHL(S) | 20 | ns | VCC± = ±5 V, TA = 25°C, RL = 390 Ω, CL = 15 pF | 6 |
CAD (KiCad official)
- Symbol:
SN75108ADR - Footprint:
Package_SO:SOIC-14_3.9x8.7mm_P1.27mm - 3D model: SOIC-14 (KiCad packages3D, STEP)
- 3D model files:
sn75108adr-etched.step/sn75108adr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn75108adr.step/sn75108adr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (35 pp, sha256
ca5dc0fc725b95b8, retrieved 2026-11-10, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).