← Commit history

Initial commit: component/sn74lvth374dbr

Ray ·d7e3b72380 ·
2 files changed +284
README.mdadded+56
@@ -0,0 +1,56 @@+# SN74LVTH374DBR++**Texas Instruments** · Flip Flops · SSOP-20-208mil++SN74LVTH374DBR from Texas Instruments, in a SSOP-20-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | OE | input | Output enable input; when high, places all Q outputs in high-impedance state. |+| 2 | 1Q | tri_state | Q output of first D-type flip-flop, set on CLK positive edge when OE is low. |+| 3 | 1D | input | Data input to first flip-flop, sampled on CLK positive edge when OE is low; bus-hold maintains state when undriven. |+| 4 | 2D | input | Data input to second flip-flop, sampled on CLK positive edge when OE is low; bus-hold maintains state when undriven. |+| 5 | 2Q | tri_state | Q output of second D-type flip-flop, set on CLK positive edge when OE is low. |+| 6 | 3Q | tri_state | Q output of third D-type flip-flop, set on CLK positive edge when OE is low. |+| 7 | 3D | input | Data input to third flip-flop, sampled on CLK positive edge when OE is low; bus-hold maintains state when undriven. |+| 8 | 4D | input | Data input to fourth flip-flop, sampled on CLK positive edge when OE is low; bus-hold maintains state when undriven. |+| 9 | 4Q | tri_state | Q output of fourth D-type flip-flop, set on CLK positive edge when OE is low. |+| 10 | GND | power_in | Ground reference, 0 V. |+| 11 | CLK | input | Clock input, positive edge triggers data input sampling when OE is low. |+| 12 | 5Q | tri_state | Q output of fifth D-type flip-flop, set on CLK positive edge when OE is low. |+| 13 | 5D | input | Data input to fifth flip-flop, sampled on CLK positive edge when OE is low; bus-hold maintains state when undriven. |+| 14 | 6D | input | Data input to sixth flip-flop, sampled on CLK positive edge when OE is low; bus-hold maintains state when undriven. |+| 15 | 6Q | tri_state | Q output of sixth D-type flip-flop, set on CLK positive edge when OE is low. |+| 16 | 7Q | tri_state | Q output of seventh D-type flip-flop, set on CLK positive edge when OE is low. |+| 17 | 7D | input | Data input to seventh flip-flop, sampled on CLK positive edge when OE is low; bus-hold maintains state when undriven. |+| 18 | 8D | input | Data input to eighth flip-flop, sampled on CLK positive edge when OE is low; bus-hold maintains state when undriven. |+| 19 | 8Q | tri_state | Q output of eighth D-type flip-flop, set on CLK positive edge when OE is low. |+| 20 | VCC | power_in | Positive supply voltage, 2.7 V to 3.6 V recommended operating range. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SSOP-20-208mil |+| Category | Logic |+| Pins | 20 |++## CAD (KiCad official)++- Symbol: `SN74LVTH374DBR`+- Footprint: `Package_SO:SSOP-20_5.3x7.2mm_P0.65mm`+- 3D model: SSOP-20-208mil (KiCad packages3D, STEP)+- 3D model files: `sn74lvth374dbr-etched.step` / `sn74lvth374dbr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sn74lvth374dbr.step` / `sn74lvth374dbr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/sn74lvth374) (23 pp, sha256 `b137028b3ae5cece`, retrieved 2026-09-27, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/sn74lvth374dbr-datasheet.pdf)
page.jsonadded+228
@@ -0,0 +1,228 @@+{+  "slug": "sn74lvth374dbr",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments Flip Flops, SSOP-20-208mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "logic",+    "sn74lvth374dbr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "sn74lvth374dbr.kicad_sym",+    "sn74lvth374dbr.kicad_mod",+    "sn74lvth374dbr.glb",+    "sn74lvth374dbr.step",+    "sn74lvth374dbr.lbr",+    "docs/hero.png",+    "docs/sn74lvth374dbr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "SN74LVTH374DBR",+    "manufacturer": "Texas Instruments",+    "package": "SSOP-20-208mil",+    "pin_count": 20,+    "category": "Logic",+    "subcategory": "Flip Flops",+    "datasheet": "https://www.ti.com/cn/lit/gpn/sn74lvth374",+    "parts": {+      "symbol": "sn74lvth374dbr.kicad_sym",+      "footprint": "sn74lvth374dbr.kicad_mod",+      "model_3d": "sn74lvth374dbr-etched.glb",+      "model_3d_plain": "sn74lvth374dbr.glb",+      "model_3d_step": "sn74lvth374dbr-etched.step",+      "model_3d_step_plain": "sn74lvth374dbr.step",+      "lbr": "sn74lvth374dbr.lbr"+    },+    "distributor_links": {+      "lcsc": "C2873051",+      "digikey": "296-8721-2-ND",+      "mouser": "595-SN74LVTH374DBR"+    },+    "distributor_check": {+      "checked_at": "2026-09-27T00:20:34Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "296-8721-2-ND",+        "status": "found",+        "lifecycle": "Active"+      },+      "mouser": {+        "pn": "595-SN74LVTH374DBR",+        "status": "found"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "OE",+        "type": "input",+        "description": "Output enable input; when high, places all Q outputs in high-impedance state."+      },+      {+        "number": "2",+        "name": "1Q",+        "type": "tri_state",+        "description": "Q output of first D-type flip-flop, set on CLK positive edge when OE is low."+      },+      {+        "number": "3",+        "name": "1D",+        "type": "input",+        "description": "Data input to first flip-flop, sampled on CLK positive edge when OE is low; bus-hold maintains state when undriven."+      },+      {+        "number": "4",+        "name": "2D",+        "type": "input",+        "description": "Data input to second flip-flop, sampled on CLK positive edge when OE is low; bus-hold maintains state when undriven."+      },+      {+        "number": "5",+        "name": "2Q",+        "type": "tri_state",+        "description": "Q output of second D-type flip-flop, set on CLK positive edge when OE is low."+      },+      {+        "number": "6",+        "name": "3Q",+        "type": "tri_state",+        "description": "Q output of third D-type flip-flop, set on CLK positive edge when OE is low."+      },+      {+        "number": "7",+        "name": "3D",+        "type": "input",+        "description": "Data input to third flip-flop, sampled on CLK positive edge when OE is low; bus-hold maintains state when undriven."+      },+      {+        "number": "8",+        "name": "4D",+        "type": "input",+        "description": "Data input to fourth flip-flop, sampled on CLK positive edge when OE is low; bus-hold maintains state when undriven."+      },+      {+        "number": "9",+        "name": "4Q",+        "type": "tri_state",+        "description": "Q output of fourth D-type flip-flop, set on CLK positive edge when OE is low."+      },+      {+        "number": "10",+        "name": "GND",+        "type": "power_in",+        "description": "Ground reference, 0 V."+      },+      {+        "number": "11",+        "name": "CLK",+        "type": "input",+        "description": "Clock input, positive edge triggers data input sampling when OE is low."+      },+      {+        "number": "12",+        "name": "5Q",+        "type": "tri_state",+        "description": "Q output of fifth D-type flip-flop, set on CLK positive edge when OE is low."+      },+      {+        "number": "13",+        "name": "5D",+        "type": "input",+        "description": "Data input to fifth flip-flop, sampled on CLK positive edge when OE is low; bus-hold maintains state when undriven."+      },+      {+        "number": "14",+        "name": "6D",+        "type": "input",+        "description": "Data input to sixth flip-flop, sampled on CLK positive edge when OE is low; bus-hold maintains state when undriven."+      },+      {+        "number": "15",+        "name": "6Q",+        "type": "tri_state",+        "description": "Q output of sixth D-type flip-flop, set on CLK positive edge when OE is low."+      },+      {+        "number": "16",+        "name": "7Q",+        "type": "tri_state",+        "description": "Q output of seventh D-type flip-flop, set on CLK positive edge when OE is low."+      },+      {+        "number": "17",+        "name": "7D",+        "type": "input",+        "description": "Data input to seventh flip-flop, sampled on CLK positive edge when OE is low; bus-hold maintains state when undriven."+      },+      {+        "number": "18",+        "name": "8D",+        "type": "input",+        "description": "Data input to eighth flip-flop, sampled on CLK positive edge when OE is low; bus-hold maintains state when undriven."+      },+      {+        "number": "19",+        "name": "8Q",+        "type": "tri_state",+        "description": "Q output of eighth D-type flip-flop, set on CLK positive edge when OE is low."+      },+      {+        "number": "20",+        "name": "VCC",+        "type": "power_in",+        "description": "Positive supply voltage, 2.7 V to 3.6 V recommended operating range."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [],+        "pages_sent": 23,+        "cost_usd": 0.2597,+        "at": "2026-09-27T00:20:14"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/sn74lvth374",+        "pages": 23,+        "sha256": "b137028b3ae5cece",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 20,+        "described": 20,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file