SN74LVTH125PWR

{
 "schema": "adom.pads/1",
 "slug": "sn74lvth125pwr",
 "footprint": "TSSOP-14_4.4x5mm_P0.65mm",
 "generated_from": {
  "footprint": "TSSOP-14_4.4x5mm_P0.65mm@sha256:e4bf82cea6d3b325",
  "pins": "page.json:component.pins",
  "overrides": null
 },
 "pin1": {
  "pad": "1",
  "at": [
   -2.8625,
   -1.95
  ],
  "corner": "top-left",
  "source": "silk-marker",
  "derived_from": "TSSOP-14_4.4x5mm_P0.65mm@sha256:e4bf82cea6d3b325"
 },
 "pad_count": 14,
 "symbol_pins": [
  "1",
  "10",
  "11",
  "12",
  "13",
  "14",
  "2",
  "3",
  "4",
  "5",
  "6",
  "7",
  "8",
  "9"
 ],
 "paste_apertures": 0,
 "issues": [],
 "pads": [
  {
   "pad": "1",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.8625,
    -1.95
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "1",
   "name": "1OE",
   "type": "input",
   "description": "Active-low output-enable for buffer 1. Drive low to enable the 1Y output; drive high to place 1Y in the high-impedance state. Bus-hold circuitry does NOT act on control inputs, so this pin must be actively driven or tied to VCC/GND.",
   "is_pin1": true,
   "source": {
    "geometry": "TSSOP-14_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "2",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.8625,
    -1.3
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "2",
   "name": "1A",
   "type": "input",
   "description": "Data input for buffer 1. TTL-compatible input accepting 0 to 5.5 V. Includes bus-hold circuitry that keeps an undriven input at its last valid logic level, so external pull-up/pull-down resistors are not required.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-14_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "3",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.8625,
    -0.65
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "3",
   "name": "1Y",
   "type": "tri_state",
   "description": "3-state buffered output for channel 1. Follows 1A when 1OE is low; goes to high-impedance when 1OE is high. Drive strength: IOH = -32 mA, IOL = 64 mA (commercial temperature grade).",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-14_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "4",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.8625,
    0.0
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "4",
   "name": "2OE",
   "type": "input",
   "description": "Active-low output-enable for buffer 2. Drive low to enable the 2Y output; drive high to place 2Y in the high-impedance state.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-14_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "5",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.8625,
    0.65
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "5",
   "name": "2A",
   "type": "input",
   "description": "Data input for buffer 2. TTL-compatible input accepting 0 to 5.5 V. Includes bus-hold on the input.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-14_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "6",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.8625,
    1.3
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "6",
   "name": "2Y",
   "type": "tri_state",
   "description": "3-state buffered output for channel 2. Follows 2A when 2OE is low; high-impedance when 2OE is high.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-14_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "7",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.8625,
    1.95
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "7",
   "name": "GND",
   "type": "power_in",
   "description": "Device ground reference (0 V). Connect to the system ground plane with a low-inductance path.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-14_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "8",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.8625,
    1.95
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "8",
   "name": "3Y",
   "type": "tri_state",
   "description": "3-state buffered output for channel 3. Follows 3A when 3OE is low; high-impedance when 3OE is high.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-14_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "9",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.8625,
    1.3
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "9",
   "name": "3A",
   "type": "input",
   "description": "Data input for buffer 3. TTL-compatible input accepting 0 to 5.5 V. Includes bus-hold on the input.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-14_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "10",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.8625,
    0.65
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "10",
   "name": "3OE",
   "type": "input",
   "description": "Active-low output-enable for buffer 3. Drive low to enable the 3Y output; drive high to place 3Y in the high-impedance state.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-14_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "11",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.8625,
    0.0
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "11",
   "name": "4Y",
   "type": "tri_state",
   "description": "3-state buffered output for channel 4. Follows 4A when 4OE is low; high-impedance when 4OE is high.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-14_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "12",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.8625,
    -0.65
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "12",
   "name": "4A",
   "type": "input",
   "description": "Data input for buffer 4. TTL-compatible input accepting 0 to 5.5 V. Includes bus-hold on the input.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-14_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "13",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.8625,
    -1.3
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "13",
   "name": "4OE",
   "type": "input",
   "description": "Active-low output-enable for buffer 4. Drive low to enable the 4Y output; drive high to place 4Y in the high-impedance state.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-14_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "14",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.8625,
    -1.95
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "14",
   "name": "VCC",
   "type": "power_in",
   "description": "Supply voltage input. Recommended operating range 2.7 V to 3.6 V (absolute max 4.6 V). Bypass locally with a 100 nF ceramic capacitor to GND.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-14_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  }
 ]
}