component
SN74LVT574DWR
Public Made by Adomby adom
Texas Instruments Flip Flops, SOIC-20-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+56@@ -0,0 +1,56 @@+# SN74LVT574DWR++**Texas Instruments** · Flip Flops · SOIC-20-300mil++SN74LVT574DWR from Texas Instruments, in a SOIC-20-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | OE | input | Buffered active-low output enable: when low the eight 3-state outputs are enabled, when high they go to high impedance, and it does not affect the flip-flop internal operation. |+| 2 | 1D | input | Data input to flip-flop 1, sampled on the positive CLK transition; bus-hold circuitry holds a floating input at a valid level and recommended input voltage is up to 5.5 V. |+| 3 | 2D | input | Data input to flip-flop 2, sampled on the positive CLK transition; bus-hold circuitry holds a floating input at a valid level and recommended input voltage is up to 5.5 V. |+| 4 | 3D | input | Data input to flip-flop 3, sampled on the positive CLK transition; bus-hold circuitry holds a floating input at a valid level and recommended input voltage is up to 5.5 V. |+| 5 | 4D | input | Data input to flip-flop 4, sampled on the positive CLK transition; bus-hold circuitry holds a floating input at a valid level and recommended input voltage is up to 5.5 V. |+| 6 | 5D | input | Data input to flip-flop 5, sampled on the positive CLK transition; bus-hold circuitry holds a floating input at a valid level and recommended input voltage is up to 5.5 V. |+| 7 | 6D | input | Data input to flip-flop 6, sampled on the positive CLK transition; bus-hold circuitry holds a floating input at a valid level and recommended input voltage is up to 5.5 V. |+| 8 | 7D | input | Data input to flip-flop 7, sampled on the positive CLK transition; bus-hold circuitry holds a floating input at a valid level and recommended input voltage is up to 5.5 V. |+| 9 | 8D | input | Data input to flip-flop 8, sampled on the positive CLK transition; bus-hold circuitry holds a floating input at a valid level and recommended input voltage is up to 5.5 V. |+| 10 | GND | power_in | Ground reference for the device. |+| 11 | CLK | input | Clock input; the Q outputs take the logic levels present on the D inputs on each positive transition, with clock frequency up to 150 MHz. |+| 12 | 8Q | tri_state | Three-state output of flip-flop 8, high impedance when OE is high; IOH is limited to -32 mA and IOL to 64 mA at VCC = 3 V for the SN74LVT574. |+| 13 | 7Q | tri_state | Three-state output of flip-flop 7, high impedance when OE is high; IOH is limited to -32 mA and IOL to 64 mA at VCC = 3 V for the SN74LVT574. |+| 14 | 6Q | tri_state | Three-state output of flip-flop 6, high impedance when OE is high; IOH is limited to -32 mA and IOL to 64 mA at VCC = 3 V for the SN74LVT574. |+| 15 | 5Q | tri_state | Three-state output of flip-flop 5, high impedance when OE is high; IOH is limited to -32 mA and IOL to 64 mA at VCC = 3 V for the SN74LVT574. |+| 16 | 4Q | tri_state | Three-state output of flip-flop 4, high impedance when OE is high; IOH is limited to -32 mA and IOL to 64 mA at VCC = 3 V for the SN74LVT574. |+| 17 | 3Q | tri_state | Three-state output of flip-flop 3, high impedance when OE is high; IOH is limited to -32 mA and IOL to 64 mA at VCC = 3 V for the SN74LVT574. |+| 18 | 2Q | tri_state | Three-state output of flip-flop 2, high impedance when OE is high; IOH is limited to -32 mA and IOL to 64 mA at VCC = 3 V for the SN74LVT574. |+| 19 | 1Q | tri_state | Three-state output of flip-flop 1, high impedance when OE is high; IOH is limited to -32 mA and IOL to 64 mA at VCC = 3 V for the SN74LVT574. |+| 20 | VCC | power_in | Positive supply, recommended range 2.7 V to 3.6 V for the SN74LVT574. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SOIC-20-300mil |+| Category | Logic |+| Pins | 20 |++## CAD (KiCad official)++- Symbol: `SN74LVT574DWR`+- Footprint: `Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm`+- 3D model: SOIC-20-300mil (KiCad packages3D, STEP)+- 3D model files: `sn74lvt574dwr-etched.step` / `sn74lvt574dwr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sn74lvt574dwr.step` / `sn74lvt574dwr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/sn74lvt574) (18 pp, sha256 `5e2b403f93ab6a15`, retrieved 2026-10-08, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/sn74lvt574dwr-datasheet.pdf)
page.jsonadded+272@@ -0,0 +1,272 @@+{+ "slug": "sn74lvt574dwr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Flip Flops, SOIC-20-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "logic",+ "sn74lvt574dwr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "sn74lvt574dwr.kicad_sym",+ "sn74lvt574dwr.kicad_mod",+ "sn74lvt574dwr.glb",+ "sn74lvt574dwr.step",+ "sn74lvt574dwr.lbr",+ "docs/hero.png",+ "docs/sn74lvt574dwr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "sn74lvt574dwr-hero.glb",+ "sn74lvt574dwr-hero.overlay.json"+ ],+ "component": {+ "mpn": "SN74LVT574DWR",+ "manufacturer": "Texas Instruments",+ "package": "SOIC-20-300mil",+ "pin_count": 20,+ "category": "Logic",+ "subcategory": "Flip Flops",+ "datasheet": "https://www.ti.com/cn/lit/gpn/sn74lvt574",+ "parts": {+ "symbol": "sn74lvt574dwr.kicad_sym",+ "footprint": "sn74lvt574dwr.kicad_mod",+ "model_3d": "sn74lvt574dwr-hero.glb",+ "model_3d_plain": "sn74lvt574dwr.glb",+ "model_3d_step": "sn74lvt574dwr-etched.step",+ "model_3d_step_plain": "sn74lvt574dwr.step",+ "lbr": "sn74lvt574dwr.lbr"+ },+ "distributor_links": {+ "lcsc": "C2862795",+ "digikey": "296-SN74LVT574DWRTR-ND",+ "mouser": "595-SN74LVT574DWR"+ },+ "distributor_check": {+ "checked_at": "2026-10-08T16:33:44Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-SN74LVT574DWRTR-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "595-SN74LVT574DWR",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "OE",+ "type": "input",+ "description": "Buffered active-low output enable: when low the eight 3-state outputs are enabled, when high they go to high impedance, and it does not affect the flip-flop internal operation."+ },+ {+ "number": "2",+ "name": "1D",+ "type": "input",+ "description": "Data input to flip-flop 1, sampled on the positive CLK transition; bus-hold circuitry holds a floating input at a valid level and recommended input voltage is up to 5.5 V."+ },+ {+ "number": "3",+ "name": "2D",+ "type": "input",+ "description": "Data input to flip-flop 2, sampled on the positive CLK transition; bus-hold circuitry holds a floating input at a valid level and recommended input voltage is up to 5.5 V."+ },+ {+ "number": "4",+ "name": "3D",+ "type": "input",+ "description": "Data input to flip-flop 3, sampled on the positive CLK transition; bus-hold circuitry holds a floating input at a valid level and recommended input voltage is up to 5.5 V."+ },+ {+ "number": "5",+ "name": "4D",+ "type": "input",+ "description": "Data input to flip-flop 4, sampled on the positive CLK transition; bus-hold circuitry holds a floating input at a valid level and recommended input voltage is up to 5.5 V."+ },+ {+ "number": "6",+ "name": "5D",+ "type": "input",+ "description": "Data input to flip-flop 5, sampled on the positive CLK transition; bus-hold circuitry holds a floating input at a valid level and recommended input voltage is up to 5.5 V."+ },+ {+ "number": "7",+ "name": "6D",+ "type": "input",+ "description": "Data input to flip-flop 6, sampled on the positive CLK transition; bus-hold circuitry holds a floating input at a valid level and recommended input voltage is up to 5.5 V."+ },+ {+ "number": "8",+ "name": "7D",+ "type": "input",+ "description": "Data input to flip-flop 7, sampled on the positive CLK transition; bus-hold circuitry holds a floating input at a valid level and recommended input voltage is up to 5.5 V."+ },+ {+ "number": "9",+ "name": "8D",+ "type": "input",+ "description": "Data input to flip-flop 8, sampled on the positive CLK transition; bus-hold circuitry holds a floating input at a valid level and recommended input voltage is up to 5.5 V."+ },+ {+ "number": "10",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for the device."+ },+ {+ "number": "11",+ "name": "CLK",+ "type": "input",+ "description": "Clock input; the Q outputs take the logic levels present on the D inputs on each positive transition, with clock frequency up to 150 MHz."+ },+ {+ "number": "12",+ "name": "8Q",+ "type": "tri_state",+ "description": "Three-state output of flip-flop 8, high impedance when OE is high; IOH is limited to -32 mA and IOL to 64 mA at VCC = 3 V for the SN74LVT574."+ },+ {+ "number": "13",+ "name": "7Q",+ "type": "tri_state",+ "description": "Three-state output of flip-flop 7, high impedance when OE is high; IOH is limited to -32 mA and IOL to 64 mA at VCC = 3 V for the SN74LVT574."+ },+ {+ "number": "14",+ "name": "6Q",+ "type": "tri_state",+ "description": "Three-state output of flip-flop 6, high impedance when OE is high; IOH is limited to -32 mA and IOL to 64 mA at VCC = 3 V for the SN74LVT574."+ },+ {+ "number": "15",+ "name": "5Q",+ "type": "tri_state",+ "description": "Three-state output of flip-flop 5, high impedance when OE is high; IOH is limited to -32 mA and IOL to 64 mA at VCC = 3 V for the SN74LVT574."+ },+ {+ "number": "16",+ "name": "4Q",+ "type": "tri_state",+ "description": "Three-state output of flip-flop 4, high impedance when OE is high; IOH is limited to -32 mA and IOL to 64 mA at VCC = 3 V for the SN74LVT574."+ },+ {+ "number": "17",+ "name": "3Q",+ "type": "tri_state",+ "description": "Three-state output of flip-flop 3, high impedance when OE is high; IOH is limited to -32 mA and IOL to 64 mA at VCC = 3 V for the SN74LVT574."+ },+ {+ "number": "18",+ "name": "2Q",+ "type": "tri_state",+ "description": "Three-state output of flip-flop 2, high impedance when OE is high; IOH is limited to -32 mA and IOL to 64 mA at VCC = 3 V for the SN74LVT574."+ },+ {+ "number": "19",+ "name": "1Q",+ "type": "tri_state",+ "description": "Three-state output of flip-flop 1, high impedance when OE is high; IOH is limited to -32 mA and IOL to 64 mA at VCC = 3 V for the SN74LVT574."+ },+ {+ "number": "20",+ "name": "VCC",+ "type": "power_in",+ "description": "Positive supply, recommended range 2.7 V to 3.6 V for the SN74LVT574."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: The DW (SOIC-20) pinout is not drawn as a separate figure. The pin-to-name mapping comes from the sh; The datasheet's package addendum lists SN74LVT574DWR as SOIC (DW), 20 pins, 2000 per reel, which mat; The schema has no field for headline specs, so none are reported here. For reference, the datasheet "+ ],+ "pages_sent": 18,+ "cost_usd": 0.0813,+ "at": "2026-10-08T16:33:24"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/sn74lvt574",+ "pages": 18,+ "sha256": "5e2b403f93ab6a15",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 20,+ "described": 20,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "sn74lvt574dwr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 10.3,+ 12.8,+ 2.75+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "59a10b341e6972b31d81802a048060326da627d8b92dcf4263064f4f62ec808e",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "sn74lvt574dwr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 10.3,+ 12.8,+ 2.75+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "241ae5c331b127ae34e32b7d248ee93e4dabba7f6018791412f10e9d762062f3",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}