main
Ray
Publish 0.1.0
e0a48a2
SN74LVC574ANSR
Texas Instruments · Flip Flops · SO-20-208mil
SN74LVC574ANSR from Texas Instruments, in a SO-20-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OE | input | Buffered output-enable input; when high, all eight Q outputs go to the high-impedance state, and it should be tied to VCC through a pullup resistor to keep the outputs high-impedance during power-up and power-down (pullup minimum set by the driver's current-sinking capability). |
| 2 | 1D | input | Data input to flip-flop 1, whose level is transferred to 1Q on the positive CLK edge; inputs accept voltages up to 5.5 V and can be driven from 3.3-V or 5-V devices. |
| 3 | 2D | input | Data input to flip-flop 2, whose level is transferred to 2Q on the positive CLK edge; inputs accept voltages up to 5.5 V. |
| 4 | 3D | input | Data input to flip-flop 3, whose level is transferred to 3Q on the positive CLK edge; inputs accept voltages up to 5.5 V. |
| 5 | 4D | input | Data input to flip-flop 4, whose level is transferred to 4Q on the positive CLK edge; inputs accept voltages up to 5.5 V. |
| 6 | 5D | input | Data input to flip-flop 5, whose level is transferred to 5Q on the positive CLK edge; inputs accept voltages up to 5.5 V. |
| 7 | 6D | input | Data input to flip-flop 6, whose level is transferred to 6Q on the positive CLK edge; inputs accept voltages up to 5.5 V. |
| 8 | 7D | input | Data input to flip-flop 7, whose level is transferred to 7Q on the positive CLK edge; inputs accept voltages up to 5.5 V. |
| 9 | 8D | input | Data input to flip-flop 8, whose level is transferred to 8Q on the positive CLK edge; inputs accept voltages up to 5.5 V. |
| 10 | GND | power_in | Ground reference for the device. |
| 11 | CLK | input | Clock input; the Q outputs are set to the logic levels at the D inputs on the positive transition of CLK, and OE does not affect the flip-flop operation. |
| 12 | 8Q | tri_state | 3-state output of flip-flop 8, designed to drive highly capacitive or relatively low-impedance loads and fully specified for partial-power-down operation via Ioff. |
| 13 | 7Q | tri_state | 3-state output of flip-flop 7, designed to drive highly capacitive or relatively low-impedance loads and fully specified for partial-power-down operation via Ioff. |
| 14 | 6Q | tri_state | 3-state output of flip-flop 6, designed to drive highly capacitive or relatively low-impedance loads and fully specified for partial-power-down operation via Ioff. |
| 15 | 5Q | tri_state | 3-state output of flip-flop 5, designed to drive highly capacitive or relatively low-impedance loads and fully specified for partial-power-down operation via Ioff. |
| 16 | 4Q | tri_state | 3-state output of flip-flop 4, designed to drive highly capacitive or relatively low-impedance loads and fully specified for partial-power-down operation via Ioff. |
| 17 | 3Q | tri_state | 3-state output of flip-flop 3, designed to drive highly capacitive or relatively low-impedance loads and fully specified for partial-power-down operation via Ioff. |
| 18 | 2Q | tri_state | 3-state output of flip-flop 2, designed to drive highly capacitive or relatively low-impedance loads and fully specified for partial-power-down operation via Ioff. |
| 19 | 1Q | tri_state | 3-state output of flip-flop 1, designed to drive highly capacitive or relatively low-impedance loads and fully specified for partial-power-down operation via Ioff. |
| 20 | VCC | power_in | Supply voltage; for the SN74LVC574A this is 1.65 V to 3.6 V, with absolute maximum rating of −0.5 V to 6.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SO-20-208mil |
| Category | Logic ICs |
| Pins | 20 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage, operating | VCC | 1.65 | 3.6 | V | Operating | 4 | |
| Supply voltage, data retention only | VCC | 1.5 | V | Data retention only | 4 | ||
| High-level input voltage | VIH | 1.7 | V | VCC = 2.3 V to 2.7 V | 4 | ||
| High-level input voltage | VIH | 2 | V | VCC = 2.7 V to 3.6 V | 4 | ||
| Low-level input voltage | VIL | 0.7 | V | VCC = 2.3 V to 2.7 V | 4 | ||
| Low-level input voltage | VIL | 0.8 | V | VCC = 2.7 V to 3.6 V | 4 | ||
| Input voltage | VI | 0 | 5.5 | V | 4 | ||
| Output voltage, 3-state | VO | 0 | 5.5 | V | 3-state | 4 | |
| High-level output current | IOH | -4 | mA | VCC = 1.65 V | 4 | ||
| High-level output current | IOH | -8 | mA | VCC = 2.3 V | 4 | ||
| High-level output current | IOH | -12 | mA | VCC = 2.7 V | 4 | ||
| High-level output current | IOH | -24 | mA | VCC = 3 V | 4 | ||
| Low-level output current | IOL | 4 | mA | VCC = 1.65 V | 4 | ||
| Low-level output current | IOL | 8 | mA | VCC = 2.3 V | 4 | ||
| Low-level output current | IOL | 12 | mA | VCC = 2.7 V | 4 | ||
| Low-level output current | IOL | 24 | mA | VCC = 3 V | 4 | ||
| Input transition rise or fall rate | Δt/Δv | 6 | ns/V | 4 | |||
| Operating free-air temperature (ordering table, SOP-NS package) | TA | -40 | 85 | °C | SN74LVC574ANSR, ordering information | 2 | |
| High-level output voltage | VOH | 1.2 | V | IOH = −4 mA, VCC = 1.65 V, TA −40 to 85°C | 6 | ||
| High-level output voltage | VOH | 1.7 | V | IOH = −8 mA, VCC = 2.3 V, TA −40 to 85°C | 6 | ||
| High-level output voltage | VOH | 2.2 | V | IOH = −12 mA, VCC = 2.7 V, TA −40 to 85°C | 6 | ||
| High-level output voltage | VOH | 2.4 | V | IOH = −12 mA, VCC = 3 V, TA −40 to 85°C | 6 | ||
| Low-level output voltage | VOL | 0.2 | V | IOL = 100 μA, VCC = 1.65 V to 3.6 V, TA −40 to 85°C | 6 | ||
| Low-level output voltage | VOL | 0.45 | V | IOL = 4 mA, VCC = 1.65 V, TA −40 to 85°C | 6 | ||
| Low-level output voltage | VOL | 0.7 | V | IOL = 8 mA, VCC = 2.3 V, TA −40 to 85°C | 6 | ||
| Low-level output voltage | VOL | 0.4 | V | IOL = 12 mA, VCC = 2.7 V, TA −40 to 85°C | 6 | ||
| Low-level output voltage | VOL | 0.55 | V | IOL = 24 mA, VCC = 3 V, TA −40 to 85°C | 6 | ||
| Input current | II | -5 | 5 | μA | VI = 5.5 V or GND, VCC = 3.6 V, TA −40 to 85°C | 6 | |
| Power-off leakage current | Ioff | -10 | 10 | μA | VI or VO = 5.5 V, VCC = 0, TA −40 to 85°C | 6 | |
| Off-state output current | IOZ | -10 | 10 | μA | VI = 0 to 5.5 V, VCC = 3.6 V, TA −40 to 85°C | 6 | |
| Supply current | ICC | 10 | μA | VI = VCC or GND, IO = 0, VCC = 3.6 V, TA −40 to 85°C | 6 | ||
| Supply current (disabled state) | ICC | 10 | μA | 3.6 V ≤ VI ≤ 5.5 V, IO = 0, VCC = 3.6 V, TA −40 to 85°C | 6 | ||
| Additional supply current per input | ΔICC | 500 | μA | One input at VCC − 0.6 V, other inputs at VCC or GND, VCC = 2.7 V to 3.6 V, TA −40 to 85°C | 6 | ||
| Supply voltage | VCC | -0.5 | 6.5 | V | 3 | ||
| Input voltage range | VI | -0.5 | 6.5 | V | see Note 1 | 3 | |
| Voltage applied to output in high-impedance or power-off state | VO | -0.5 | 6.5 | V | see Note 1 | 3 | |
| Input clamp current | IIK | -50 | mA | VI < 0 | 3 | ||
| Output clamp current | IOK | -50 | mA | VO < 0 | 3 | ||
| Continuous output current | IO | -50 | 50 | mA | 3 | ||
| Continuous current through VCC or GND | -100 | 100 | mA | 3 | |||
| Storage temperature range | Tstg | -65 | 150 | °C | 3 | ||
| Power dissipation | Ptot | 500 | mW | TA = −40°C to 125°C | 3 | ||
| Package thermal impedance, junction to ambient | θJA | 60 | °C/W | NS package, per JESD 51-7 (Note 3) | 3 |
CAD (KiCad official)
- Symbol:
SN74LVC574ANSR - Footprint:
Package_SO:SO-20_5.3x12.6mm_P1.27mm - 3D model: SO-20-208mil, generated on the KiCad land (body 5.3 x 12.6 mm, terminals on the pads, 1.75 mm tall, family nominal (no datasheet A read)). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
sn74lvc574ansr-etched.step/sn74lvc574ansr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn74lvc574ansr.step/sn74lvc574ansr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (32 pp, sha256
da4f86b769484377, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# SN74LVC574ANSR
**Texas Instruments** · Flip Flops · SO-20-208mil
SN74LVC574ANSR from Texas Instruments, in a SO-20-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OE | input | Buffered output-enable input; when high, all eight Q outputs go to the high-impedance state, and it should be tied to VCC through a pullup resistor to keep the outputs high-impedance during power-up and power-down (pullup minimum set by the driver's current-sinking capability). |
| 2 | 1D | input | Data input to flip-flop 1, whose level is transferred to 1Q on the positive CLK edge; inputs accept voltages up to 5.5 V and can be driven from 3.3-V or 5-V devices. |
| 3 | 2D | input | Data input to flip-flop 2, whose level is transferred to 2Q on the positive CLK edge; inputs accept voltages up to 5.5 V. |
| 4 | 3D | input | Data input to flip-flop 3, whose level is transferred to 3Q on the positive CLK edge; inputs accept voltages up to 5.5 V. |
| 5 | 4D | input | Data input to flip-flop 4, whose level is transferred to 4Q on the positive CLK edge; inputs accept voltages up to 5.5 V. |
| 6 | 5D | input | Data input to flip-flop 5, whose level is transferred to 5Q on the positive CLK edge; inputs accept voltages up to 5.5 V. |
| 7 | 6D | input | Data input to flip-flop 6, whose level is transferred to 6Q on the positive CLK edge; inputs accept voltages up to 5.5 V. |
| 8 | 7D | input | Data input to flip-flop 7, whose level is transferred to 7Q on the positive CLK edge; inputs accept voltages up to 5.5 V. |
| 9 | 8D | input | Data input to flip-flop 8, whose level is transferred to 8Q on the positive CLK edge; inputs accept voltages up to 5.5 V. |
| 10 | GND | power_in | Ground reference for the device. |
| 11 | CLK | input | Clock input; the Q outputs are set to the logic levels at the D inputs on the positive transition of CLK, and OE does not affect the flip-flop operation. |
| 12 | 8Q | tri_state | 3-state output of flip-flop 8, designed to drive highly capacitive or relatively low-impedance loads and fully specified for partial-power-down operation via Ioff. |
| 13 | 7Q | tri_state | 3-state output of flip-flop 7, designed to drive highly capacitive or relatively low-impedance loads and fully specified for partial-power-down operation via Ioff. |
| 14 | 6Q | tri_state | 3-state output of flip-flop 6, designed to drive highly capacitive or relatively low-impedance loads and fully specified for partial-power-down operation via Ioff. |
| 15 | 5Q | tri_state | 3-state output of flip-flop 5, designed to drive highly capacitive or relatively low-impedance loads and fully specified for partial-power-down operation via Ioff. |
| 16 | 4Q | tri_state | 3-state output of flip-flop 4, designed to drive highly capacitive or relatively low-impedance loads and fully specified for partial-power-down operation via Ioff. |
| 17 | 3Q | tri_state | 3-state output of flip-flop 3, designed to drive highly capacitive or relatively low-impedance loads and fully specified for partial-power-down operation via Ioff. |
| 18 | 2Q | tri_state | 3-state output of flip-flop 2, designed to drive highly capacitive or relatively low-impedance loads and fully specified for partial-power-down operation via Ioff. |
| 19 | 1Q | tri_state | 3-state output of flip-flop 1, designed to drive highly capacitive or relatively low-impedance loads and fully specified for partial-power-down operation via Ioff. |
| 20 | VCC | power_in | Supply voltage; for the SN74LVC574A this is 1.65 V to 3.6 V, with absolute maximum rating of −0.5 V to 6.5 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SO-20-208mil |
| Category | Logic ICs |
| Pins | 20 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage, operating | VCC | 1.65 | | 3.6 | V | Operating | 4 |
| Supply voltage, data retention only | VCC | 1.5 | | | V | Data retention only | 4 |
| High-level input voltage | VIH | 1.7 | | | V | VCC = 2.3 V to 2.7 V | 4 |
| High-level input voltage | VIH | 2 | | | V | VCC = 2.7 V to 3.6 V | 4 |
| Low-level input voltage | VIL | | | 0.7 | V | VCC = 2.3 V to 2.7 V | 4 |
| Low-level input voltage | VIL | | | 0.8 | V | VCC = 2.7 V to 3.6 V | 4 |
| Input voltage | VI | 0 | | 5.5 | V | | 4 |
| Output voltage, 3-state | VO | 0 | | 5.5 | V | 3-state | 4 |
| High-level output current | IOH | -4 | | | mA | VCC = 1.65 V | 4 |
| High-level output current | IOH | -8 | | | mA | VCC = 2.3 V | 4 |
| High-level output current | IOH | -12 | | | mA | VCC = 2.7 V | 4 |
| High-level output current | IOH | -24 | | | mA | VCC = 3 V | 4 |
| Low-level output current | IOL | | | 4 | mA | VCC = 1.65 V | 4 |
| Low-level output current | IOL | | | 8 | mA | VCC = 2.3 V | 4 |
| Low-level output current | IOL | | | 12 | mA | VCC = 2.7 V | 4 |
| Low-level output current | IOL | | | 24 | mA | VCC = 3 V | 4 |
| Input transition rise or fall rate | Δt/Δv | | | 6 | ns/V | | 4 |
| Operating free-air temperature (ordering table, SOP-NS package) | TA | -40 | | 85 | °C | SN74LVC574ANSR, ordering information | 2 |
| High-level output voltage | VOH | 1.2 | | | V | IOH = −4 mA, VCC = 1.65 V, TA −40 to 85°C | 6 |
| High-level output voltage | VOH | 1.7 | | | V | IOH = −8 mA, VCC = 2.3 V, TA −40 to 85°C | 6 |
| High-level output voltage | VOH | 2.2 | | | V | IOH = −12 mA, VCC = 2.7 V, TA −40 to 85°C | 6 |
| High-level output voltage | VOH | 2.4 | | | V | IOH = −12 mA, VCC = 3 V, TA −40 to 85°C | 6 |
| Low-level output voltage | VOL | | | 0.2 | V | IOL = 100 μA, VCC = 1.65 V to 3.6 V, TA −40 to 85°C | 6 |
| Low-level output voltage | VOL | | | 0.45 | V | IOL = 4 mA, VCC = 1.65 V, TA −40 to 85°C | 6 |
| Low-level output voltage | VOL | | | 0.7 | V | IOL = 8 mA, VCC = 2.3 V, TA −40 to 85°C | 6 |
| Low-level output voltage | VOL | | | 0.4 | V | IOL = 12 mA, VCC = 2.7 V, TA −40 to 85°C | 6 |
| Low-level output voltage | VOL | | | 0.55 | V | IOL = 24 mA, VCC = 3 V, TA −40 to 85°C | 6 |
| Input current | II | -5 | | 5 | μA | VI = 5.5 V or GND, VCC = 3.6 V, TA −40 to 85°C | 6 |
| Power-off leakage current | Ioff | -10 | | 10 | μA | VI or VO = 5.5 V, VCC = 0, TA −40 to 85°C | 6 |
| Off-state output current | IOZ | -10 | | 10 | μA | VI = 0 to 5.5 V, VCC = 3.6 V, TA −40 to 85°C | 6 |
| Supply current | ICC | | | 10 | μA | VI = VCC or GND, IO = 0, VCC = 3.6 V, TA −40 to 85°C | 6 |
| Supply current (disabled state) | ICC | | | 10 | μA | 3.6 V ≤ VI ≤ 5.5 V, IO = 0, VCC = 3.6 V, TA −40 to 85°C | 6 |
| Additional supply current per input | ΔICC | | | 500 | μA | One input at VCC − 0.6 V, other inputs at VCC or GND, VCC = 2.7 V to 3.6 V, TA −40 to 85°C | 6 |
| Supply voltage | VCC | -0.5 | | 6.5 | V | | 3 |
| Input voltage range | VI | -0.5 | | 6.5 | V | see Note 1 | 3 |
| Voltage applied to output in high-impedance or power-off state | VO | -0.5 | | 6.5 | V | see Note 1 | 3 |
| Input clamp current | IIK | -50 | | | mA | VI < 0 | 3 |
| Output clamp current | IOK | -50 | | | mA | VO < 0 | 3 |
| Continuous output current | IO | -50 | | 50 | mA | | 3 |
| Continuous current through VCC or GND | | -100 | | 100 | mA | | 3 |
| Storage temperature range | Tstg | -65 | | 150 | °C | | 3 |
| Power dissipation | Ptot | | | 500 | mW | TA = −40°C to 125°C | 3 |
| Package thermal impedance, junction to ambient | θJA | | 60 | | °C/W | NS package, per JESD 51-7 (Note 3) | 3 |
## CAD (KiCad official)
- Symbol: `SN74LVC574ANSR`
- Footprint: `Package_SO:SO-20_5.3x12.6mm_P1.27mm`
- 3D model: SO-20-208mil, generated on the KiCad land (body 5.3 x 12.6 mm, terminals on the pads, 1.75 mm tall, family nominal (no datasheet A read)). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `sn74lvc574ansr-etched.step` / `sn74lvc574ansr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sn74lvc574ansr.step` / `sn74lvc574ansr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/sn74lvc574a.pdf) (32 pp, sha256 `da4f86b769484377`, retrieved 2026-11-13, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/sn74lvc574ansr-datasheet.pdf)