main
Ray
Publish 0.1.0
7bdec03
SN74LVC573AQPWRQ1
Texas Instruments · Latches · TSSOP-20
SN74LVC573AQPWRQ1 from Texas Instruments, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OE | input | Active-low output enable; when high, the eight Q outputs go to the high-impedance state, and tying OE to VCC through a pullup keeps the outputs off during power up or power down. |
| 2 | 1D | input | Data input for latch 1; accepts voltages up to 5.5 V while VCC is 2.7 V to 3.6 V. |
| 3 | 2D | input | Data input for latch 2; accepts voltages up to 5.5 V while VCC is 2.7 V to 3.6 V. |
| 4 | 3D | input | Data input for latch 3; accepts voltages up to 5.5 V while VCC is 2.7 V to 3.6 V. |
| 5 | 4D | input | Data input for latch 4; accepts voltages up to 5.5 V while VCC is 2.7 V to 3.6 V. |
| 6 | 5D | input | Data input for latch 5; accepts voltages up to 5.5 V while VCC is 2.7 V to 3.6 V. |
| 7 | 6D | input | Data input for latch 6; accepts voltages up to 5.5 V while VCC is 2.7 V to 3.6 V. |
| 8 | 7D | input | Data input for latch 7; accepts voltages up to 5.5 V while VCC is 2.7 V to 3.6 V. |
| 9 | 8D | input | Data input for latch 8; accepts voltages up to 5.5 V while VCC is 2.7 V to 3.6 V. |
| 10 | GND | power_in | Ground reference for the device; unused inputs must be held at VCC or GND. |
| 11 | LE | input | Latch enable; the Q outputs follow the D inputs while LE is high and are latched at the D levels when LE goes low. |
| 12 | 8Q | tri_state | 3-state output of latch 8, specified for driving highly capacitive or low-impedance loads (IOH up to -24 mA and IOL up to 24 mA at VCC = 3 V). |
| 13 | 7Q | tri_state | 3-state output of latch 7, specified for driving highly capacitive or low-impedance loads (IOH up to -24 mA and IOL up to 24 mA at VCC = 3 V). |
| 14 | 6Q | tri_state | 3-state output of latch 6, specified for driving highly capacitive or low-impedance loads (IOH up to -24 mA and IOL up to 24 mA at VCC = 3 V). |
| 15 | 5Q | tri_state | 3-state output of latch 5, specified for driving highly capacitive or low-impedance loads (IOH up to -24 mA and IOL up to 24 mA at VCC = 3 V). |
| 16 | 4Q | tri_state | 3-state output of latch 4, specified for driving highly capacitive or low-impedance loads (IOH up to -24 mA and IOL up to 24 mA at VCC = 3 V). |
| 17 | 3Q | tri_state | 3-state output of latch 3, specified for driving highly capacitive or low-impedance loads (IOH up to -24 mA and IOL up to 24 mA at VCC = 3 V). |
| 18 | 2Q | tri_state | 3-state output of latch 2, specified for driving highly capacitive or low-impedance loads (IOH up to -24 mA and IOL up to 24 mA at VCC = 3 V). |
| 19 | 1Q | tri_state | 3-state output of latch 1, specified for driving highly capacitive or low-impedance loads (IOH up to -24 mA and IOL up to 24 mA at VCC = 3 V). |
| 20 | VCC | power_in | Supply voltage; operating range is 2 V to 3.6 V (data retention only down to 1.5 V). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-20 |
| Category | Logic |
| Pins | 20 |
CAD (KiCad official)
- Symbol:
SN74LVC573AQPWRQ1 - Footprint:
Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm - 3D model: TSSOP-20 (KiCad packages3D, STEP)
- 3D model files:
sn74lvc573aqpwrq1-etched.step/sn74lvc573aqpwrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn74lvc573aqpwrq1.step/sn74lvc573aqpwrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (16 pp, sha256
3ca3e13f31964e35, retrieved 2026-11-05, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# SN74LVC573AQPWRQ1
**Texas Instruments** · Latches · TSSOP-20
SN74LVC573AQPWRQ1 from Texas Instruments, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OE | input | Active-low output enable; when high, the eight Q outputs go to the high-impedance state, and tying OE to VCC through a pullup keeps the outputs off during power up or power down. |
| 2 | 1D | input | Data input for latch 1; accepts voltages up to 5.5 V while VCC is 2.7 V to 3.6 V. |
| 3 | 2D | input | Data input for latch 2; accepts voltages up to 5.5 V while VCC is 2.7 V to 3.6 V. |
| 4 | 3D | input | Data input for latch 3; accepts voltages up to 5.5 V while VCC is 2.7 V to 3.6 V. |
| 5 | 4D | input | Data input for latch 4; accepts voltages up to 5.5 V while VCC is 2.7 V to 3.6 V. |
| 6 | 5D | input | Data input for latch 5; accepts voltages up to 5.5 V while VCC is 2.7 V to 3.6 V. |
| 7 | 6D | input | Data input for latch 6; accepts voltages up to 5.5 V while VCC is 2.7 V to 3.6 V. |
| 8 | 7D | input | Data input for latch 7; accepts voltages up to 5.5 V while VCC is 2.7 V to 3.6 V. |
| 9 | 8D | input | Data input for latch 8; accepts voltages up to 5.5 V while VCC is 2.7 V to 3.6 V. |
| 10 | GND | power_in | Ground reference for the device; unused inputs must be held at VCC or GND. |
| 11 | LE | input | Latch enable; the Q outputs follow the D inputs while LE is high and are latched at the D levels when LE goes low. |
| 12 | 8Q | tri_state | 3-state output of latch 8, specified for driving highly capacitive or low-impedance loads (IOH up to -24 mA and IOL up to 24 mA at VCC = 3 V). |
| 13 | 7Q | tri_state | 3-state output of latch 7, specified for driving highly capacitive or low-impedance loads (IOH up to -24 mA and IOL up to 24 mA at VCC = 3 V). |
| 14 | 6Q | tri_state | 3-state output of latch 6, specified for driving highly capacitive or low-impedance loads (IOH up to -24 mA and IOL up to 24 mA at VCC = 3 V). |
| 15 | 5Q | tri_state | 3-state output of latch 5, specified for driving highly capacitive or low-impedance loads (IOH up to -24 mA and IOL up to 24 mA at VCC = 3 V). |
| 16 | 4Q | tri_state | 3-state output of latch 4, specified for driving highly capacitive or low-impedance loads (IOH up to -24 mA and IOL up to 24 mA at VCC = 3 V). |
| 17 | 3Q | tri_state | 3-state output of latch 3, specified for driving highly capacitive or low-impedance loads (IOH up to -24 mA and IOL up to 24 mA at VCC = 3 V). |
| 18 | 2Q | tri_state | 3-state output of latch 2, specified for driving highly capacitive or low-impedance loads (IOH up to -24 mA and IOL up to 24 mA at VCC = 3 V). |
| 19 | 1Q | tri_state | 3-state output of latch 1, specified for driving highly capacitive or low-impedance loads (IOH up to -24 mA and IOL up to 24 mA at VCC = 3 V). |
| 20 | VCC | power_in | Supply voltage; operating range is 2 V to 3.6 V (data retention only down to 1.5 V). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-20 |
| Category | Logic |
| Pins | 20 |
## CAD (KiCad official)
- Symbol: `SN74LVC573AQPWRQ1`
- Footprint: `Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm`
- 3D model: TSSOP-20 (KiCad packages3D, STEP)
- 3D model files: `sn74lvc573aqpwrq1-etched.step` / `sn74lvc573aqpwrq1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sn74lvc573aqpwrq1.step` / `sn74lvc573aqpwrq1.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/sn74lvc573a-q1.pdf) (16 pp, sha256 `3ca3e13f31964e35`, retrieved 2026-11-05, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/sn74lvc573aqpwrq1-datasheet.pdf)