← Commit history

Publish 0.1.3

Ray ·e813736d7a · ·parent 6fed0d2
3 files changed +127−115
README.md+64−56
@@ -8,26 +8,26 @@ SN74LVC374ADWR from Texas Instruments, in a SOIC-20-300mil. Pinout and pin descr  | Pin | Name | Type | Function | |---|---|---|---|-| 1 | OE | input | Buffered active-low output enable for the eight 3-state outputs; when OE is high the outputs go to high impedance, and OE should be tied to VCC through a pullup resistor to keep the outputs high-impedance during power up and power down. |-| 2 | 1Q | output | 3-state output 1, which takes the logic level of 1D on the positive CLK transition and is high impedance while OE is high. |-| 3 | 1D | input | Data input 1, which accepts voltages up to 5.5 V and is sampled on the positive transition of CLK. |-| 4 | 2D | input | Data input 2, which accepts voltages up to 5.5 V and is sampled on the positive transition of CLK. |-| 5 | 2Q | output | 3-state output 2, which takes the logic level of 2D on the positive CLK transition and is high impedance while OE is high. |-| 6 | 3Q | output | 3-state output 3, which takes the logic level of 3D on the positive CLK transition and is high impedance while OE is high. |-| 7 | 3D | input | Data input 3, which accepts voltages up to 5.5 V and is sampled on the positive transition of CLK. |-| 8 | 4D | input | Data input 4, which accepts voltages up to 5.5 V and is sampled on the positive transition of CLK. |-| 9 | 4Q | output | 3-state output 4, which takes the logic level of 4D on the positive CLK transition and is high impedance while OE is high. |-| 10 | GND | power_in | Ground pin; all unused inputs must be held at VCC or GND for proper device operation. |-| 11 | CLK | input | Clock input; on its positive transition the Q outputs are set to the logic levels present at the D inputs. |-| 12 | 5Q | output | 3-state output 5, which takes the logic level of 5D on the positive CLK transition and is high impedance while OE is high. |-| 13 | 5D | input | Data input 5, which accepts voltages up to 5.5 V and is sampled on the positive transition of CLK. |-| 14 | 6D | input | Data input 6, which accepts voltages up to 5.5 V and is sampled on the positive transition of CLK. |-| 15 | 6Q | output | 3-state output 6, which takes the logic level of 6D on the positive CLK transition and is high impedance while OE is high. |-| 16 | 7Q | output | 3-state output 7, which takes the logic level of 7D on the positive CLK transition and is high impedance while OE is high. |-| 17 | 7D | input | Data input 7, which accepts voltages up to 5.5 V and is sampled on the positive transition of CLK. |-| 18 | 8D | input | Data input 8, which accepts voltages up to 5.5 V and is sampled on the positive transition of CLK. |-| 19 | 8Q | output | 3-state output 8, which takes the logic level of 8D on the positive CLK transition and is high impedance while OE is high. |-| 20 | VCC | power_in | Supply pin; the SN74LVC374A is specified for 1.65 V to 3.6 V operation. |+| 1 | OE | input | Buffered output-enable; when high, all eight outputs go to high impedance, and it should be tied to VCC through a pullup resistor so the outputs stay high-impedance during power up and power down. |+| 2 | 1Q | output | Output 1 takes the logic level of 1D on the positive CLK transition and is high impedance when OE is high; load current should not exceed 25 mA per output. |+| 3 | 1D | input | Data input 1 is latched on the positive transition of CLK, and inputs accept voltages up to 5.5 V. |+| 4 | 2D | input | Data input 2 is latched on the positive transition of CLK, and inputs accept voltages up to 5.5 V. |+| 5 | 2Q | output | Output 2 takes the logic level of 2D on the positive CLK transition and is high impedance when OE is high; load current should not exceed 25 mA per output. |+| 6 | 3Q | output | Output 3 takes the logic level of 3D on the positive CLK transition and is high impedance when OE is high; load current should not exceed 25 mA per output. |+| 7 | 3D | input | Data input 3 is latched on the positive transition of CLK, and inputs accept voltages up to 5.5 V. |+| 8 | 4D | input | Data input 4 is latched on the positive transition of CLK, and inputs accept voltages up to 5.5 V. |+| 9 | 4Q | output | Output 4 takes the logic level of 4D on the positive CLK transition and is high impedance when OE is high; load current should not exceed 25 mA per output. |+| 10 | GND | power_in | Ground pin. |+| 11 | CLK | input | Clock input; the Q outputs are set to the D input levels on its positive transition. |+| 12 | 5Q | output | Output 5 takes the logic level of 5D on the positive CLK transition and is high impedance when OE is high; load current should not exceed 25 mA per output. |+| 13 | 5D | input | Data input 5 is latched on the positive transition of CLK, and inputs accept voltages up to 5.5 V. |+| 14 | 6D | input | Data input 6 is latched on the positive transition of CLK, and inputs accept voltages up to 5.5 V. |+| 15 | 6Q | output | Output 6 takes the logic level of 6D on the positive CLK transition and is high impedance when OE is high; load current should not exceed 25 mA per output. |+| 16 | 7Q | output | Output 7 takes the logic level of 7D on the positive CLK transition and is high impedance when OE is high; load current should not exceed 25 mA per output. |+| 17 | 7D | input | Data input 7 is latched on the positive transition of CLK, and inputs accept voltages up to 5.5 V. |+| 18 | 8D | input | Data input 8 is latched on the positive transition of CLK, and inputs accept voltages up to 5.5 V. |+| 19 | 8Q | output | Output 8 takes the logic level of 8D on the positive CLK transition and is high impedance when OE is high; load current should not exceed 25 mA per output. |+| 20 | VCC | power_in | Supply pin; the device operates from 1.65 V to 3.6 V, and a 0.1-µF bypass capacitor is recommended as close to the pin as possible. |  ## Key specifications @@ -44,14 +44,23 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries  | Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page | |---|---|---|---|---|---|---|---|-| Supply voltage, operating | VCC | 1.65 |  | 3.6 | V | Operating | 5 |-| Supply voltage, data retention only | VCC | 1.5 |  |  | V | Data retention only | 5 |+| Supply voltage range | VCC | -0.5 |  | 6.5 | V |  | 4 |+| Input voltage range | VI | -0.5 |  | 6.5 | V |  | 4 |+| Voltage applied to output in high-impedance or power-off state | VO | -0.5 |  | 6.5 | V | high-impedance or power-off state | 4 |+| Voltage applied to output in high or low state | VO | -0.5 |  |  | V | high or low state; max printed as VCC + 0.5 V | 4 |+| Input clamp current | IIK | -50 |  |  | mA | VI < 0 | 4 |+| Output clamp current | IOK | -50 |  |  | mA | VO < 0 | 4 |+| Continuous output current | IO | -50 |  | 50 | mA |  | 4 |+| Continuous current through VCC or GND |  | -100 |  | 100 | mA |  | 4 |+| Storage temperature range | Tstg | -65 |  | 150 | °C |  | 4 |+| Supply voltage, operating | VCC | 1.65 |  | 3.6 | V | SN74LVC374A column | 5 |+| Supply voltage, data retention only | VCC | 1.5 |  |  | V | data retention only | 5 | | High-level input voltage | VIH | 1.7 |  |  | V | VCC = 2.3 V to 2.7 V | 5 | | High-level input voltage | VIH | 2 |  |  | V | VCC = 2.7 V to 3.6 V | 5 | | Low-level input voltage | VIL |  |  | 0.7 | V | VCC = 2.3 V to 2.7 V | 5 | | Low-level input voltage | VIL |  |  | 0.8 | V | VCC = 2.7 V to 3.6 V | 5 | | Input voltage | VI | 0 |  | 5.5 | V |  | 5 |-| Output voltage, high or low state | VO | 0 |  |  | V | High or low state | 5 |+| Output voltage, high or low state | VO | 0 |  |  | V | high or low state; max printed as VCC | 5 | | Output voltage, 3-state | VO | 0 |  | 5.5 | V | 3-state | 5 | | High-level output current | IOH | -4 |  |  | mA | VCC = 1.65 V | 5 | | High-level output current | IOH | -8 |  |  | mA | VCC = 2.3 V | 5 |@@ -63,38 +72,37 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries | Low-level output current | IOL |  |  | 24 | mA | VCC = 3 V | 5 | | Input transition rise or fall rate | Δt/Δv |  |  | 10 | ns/V |  | 5 | | Operating free-air temperature | TA | -40 |  | 125 | °C | SN74LVC374A column as printed | 5 |-| Supply voltage range | VCC | -0.5 |  | 6.5 | V |  | 4 |-| Input voltage range | VI | -0.5 |  | 6.5 | V |  | 4 |-| Voltage range applied to any output in the high-impedance or power-off state | VO | -0.5 |  | 6.5 | V | High-impedance or power-off state | 4 |-| Voltage range applied to any output in the high or low state | VO | -0.5 |  |  | V | High or low state | 4 |-| Input clamp current | IIK | -50 |  |  | mA | VI < 0 | 4 |-| Output clamp current | IOK | -50 |  |  | mA | VO < 0 | 4 |-| Continuous output current | IO | -50 |  | 50 | mA |  | 4 |-| Continuous current through VCC or GND |  | -100 |  | 100 | mA |  | 4 |-| Storage temperature range | Tstg | -65 |  | 150 | °C |  | 4 |-| High-level output voltage | VOH | 1.2 |  |  | V | IOH = -4 mA; VCC = 1.65 V | 6 |-| High-level output voltage | VOH | 1.7 |  |  | V | IOH = -8 mA; VCC = 2.3 V | 6 |-| High-level output voltage | VOH | 2.2 |  |  | V | IOH = -12 mA; VCC = 2.7 V | 6 |-| High-level output voltage | VOH | 2.4 |  |  | V | IOH = -24 mA; VCC = 3 V | 6 |-| Low-level output voltage | VOL |  |  | 0.2 | V | IOL = 100 μA; VCC = 1.65 V to 3.6 V | 6 |-| Low-level output voltage | VOL |  |  | 0.45 | V | IOL = 4 mA; VCC = 1.65 V | 6 |-| Low-level output voltage | VOL |  |  | 0.7 | V | IOL = 8 mA; VCC = 2.3 V | 6 |-| Low-level output voltage | VOL |  |  | 0.4 | V | IOL = 12 mA; VCC = 2.7 V | 6 |-| Low-level output voltage | VOL |  |  | 0.55 | V | IOL = 24 mA; VCC = 3 V | 6 |-| Input current | II | -5 |  | 5 | μA | VI = 0 to 5.5 V; VCC = 3.6 V | 6 |-| Power-off leakage current | Ioff | -10 |  | 10 | μA | VI or VO = 5.5 V; VCC = 0 | 6 |-| Off-state output current | IOZ | -10 |  | 10 | μA | VO = 0 to 5.5 V; VCC = 3.6 V | 6 |-| Quiescent supply current | ICC |  |  | 10 | μA | VI = VCC or GND; IO = 0; VCC = 3.6 V | 6 |-| Additional quiescent supply current per input | ΔICC |  |  | 500 | μA | One input at VCC, 0.6 V; other inputs at VCC or GND; VCC = 2.7 V to 3.6 V | 6 |-| Input capacitance | Ci |  | 4 |  | pF | VI = VCC or GND; VCC = 3.3 V | 6 |-| Output capacitance | Co |  | 5.5 |  | pF | VO = VCC or GND; VCC = 3.3 V | 6 |-| Pulse duration, CLK high or low | tw | 3.3 |  |  | ns | VCC = 3.3 V ± 0.3 V | 8 |-| Setup time, data before CLK↑ | tsu | 2 |  |  | ns | VCC = 3.3 V ± 0.3 V | 8 |-| Hold time, data after CLK↑ | th | 1.5 |  |  | ns | VCC = 3.3 V ± 0.3 V | 8 |-| Propagation delay, CLK to Q | tpd | 1.5 |  | 7 | ns | VCC = 3.3 V ± 0.3 V; -40°C to 85°C | 8 |-| Enable time, OE to Q | ten | 1.5 |  | 7.5 | ns | VCC = 3.3 V ± 0.3 V; -40°C to 85°C | 8 |-| Disable time, OE to Q | tdis | 1.5 |  | 6.5 | ns | VCC = 3.3 V ± 0.3 V; -40°C to 85°C | 8 |-| Output skew | tsk(o) |  |  | 1 | ns | VCC = 3.3 V ± 0.3 V; -40°C to 85°C | 8 |+| High-level output voltage | VOH | 1.2 |  |  | V | IOH = -4 mA; VCC = 1.65 V; -40°C to 85°C | 6 |+| High-level output voltage | VOH | 1.7 |  |  | V | IOH = -8 mA; VCC = 2.3 V; -40°C to 85°C | 6 |+| High-level output voltage | VOH | 2.2 |  |  | V | IOH = -12 mA; VCC = 2.7 V; -40°C to 85°C | 6 |+| High-level output voltage | VOH | 2.4 |  |  | V | IOH = -24 mA; VCC = 3 V; -40°C to 85°C | 6 |+| Low-level output voltage | VOL |  |  | 0.2 | V | IOL = 100 µA; VCC = 1.65 V to 3.6 V; -40°C to 85°C | 6 |+| Low-level output voltage | VOL |  |  | 0.45 | V | IOL = 4 mA; VCC = 1.65 V; -40°C to 85°C | 6 |+| Low-level output voltage | VOL |  |  | 0.7 | V | IOL = 8 mA; VCC = 2.3 V; -40°C to 85°C | 6 |+| Low-level output voltage | VOL |  |  | 0.4 | V | IOL = 12 mA; VCC = 2.7 V; -40°C to 85°C | 6 |+| Low-level output voltage | VOL |  |  | 0.55 | V | IOL = 24 mA; VCC = 3 V; -40°C to 85°C | 6 |+| Input leakage current | II | -5 |  | 5 | µA | VI = 0 to 5.5 V; VCC = 3.6 V; -40°C to 85°C | 6 |+| Power-off leakage current | Ioff | -10 |  | 10 | µA | VCC = 0; VI or VO = 5.5 V; -40°C to 85°C | 6 |+| 3-state output off-state current | IOZ | -10 |  | 10 | µA | VO = 0 to 5.5 V; VCC = 3.6 V; -40°C to 85°C | 6 |+| Quiescent supply current | ICC |  |  | 10 | µA | VI = VCC or GND; IO = 0; VCC = 3.6 V; -40°C to 85°C | 6 |+| Quiescent supply current, input above VCC | ICC |  |  | 10 | µA | 3.6 V ≤ VI ≤ 5.5 V; disabled state only; -40°C to 85°C | 6 |+| Additional quiescent supply current per input at VCC - 0.6 V | ΔICC |  |  | 500 | µA | One input at VCC - 0.6 V, others at VCC or GND; VCC = 2.7 V to 3.6 V; -40°C to 85°C | 6 |+| Clock frequency, minimum fmax at VCC 1.8 V | fmax | 55 |  |  | MHz | VCC = 1.8 V ± 0.15 V; -40°C to 85°C | 8 |+| Clock frequency, minimum fmax at VCC 2.5 V | fmax | 95 |  |  | MHz | VCC = 2.5 V ± 0.2 V; -40°C to 85°C | 8 |+| Clock frequency, minimum fmax at VCC 2.7 V | fmax | 80 |  |  | MHz | VCC = 2.7 V; -40°C to 85°C | 8 |+| Clock frequency, minimum fmax at VCC 3.3 V | fmax | 100 |  |  | MHz | VCC = 3.3 V ± 0.3 V; -40°C to 85°C | 8 |+| Propagation delay CLK to Q | tpd |  |  | 21.9 | ns | VCC = 1.8 V ± 0.15 V; -40°C to 85°C; see Figure 3 | 8 |+| Propagation delay CLK to Q | tpd |  |  | 10.8 | ns | VCC = 2.5 V ± 0.2 V; -40°C to 85°C; see Figure 3 | 8 |+| Propagation delay CLK to Q | tpd |  |  | 8.1 | ns | VCC = 2.7 V; -40°C to 85°C; see Figure 3 | 8 |+| Propagation delay CLK to Q | tpd | 1.5 |  | 7 | ns | VCC = 3.3 V ± 0.3 V; -40°C to 85°C; see Figure 3 | 8 |+| Enable time OE to Q | ten |  |  | 19.8 | ns | VCC = 1.8 V ± 0.15 V; -40°C to 85°C; see Figure 3 | 8 |+| Enable time OE to Q | ten |  |  | 10.8 | ns | VCC = 2.5 V ± 0.2 V; -40°C to 85°C; see Figure 3 | 8 |+| Enable time OE to Q | ten |  |  | 8.5 | ns | VCC = 2.7 V; -40°C to 85°C; see Figure 3 | 8 |+| Enable time OE to Q | ten | 1.5 |  | 7.5 | ns | VCC = 3.3 V ± 0.3 V; -40°C to 85°C; see Figure 3 | 8 |+| Disable time OE to Q | tdis |  |  | 19.1 | ns | VCC = 1.8 V ± 0.15 V; -40°C to 85°C; see Figure 3 | 8 |+| Disable time OE to Q | tdis |  |  | 18.1 | ns | VCC = 2.5 V ± 0.2 V; -40°C to 85°C; see Figure 3 | 8 |+| Disable time OE to Q | tdis |  |  | 7.1 | ns | VCC = 2.7 V; -40°C to 85°C; see Figure 3 | 8 |+| Disable time OE to Q | tdis | 1.5 |  | 6.5 | ns | VCC = 3.3 V ± 0.3 V; -40°C to 85°C; see Figure 3 | 8 |  ## CAD (KiCad official) @@ -107,7 +115,7 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries  Data extracted from the manufacturer datasheet, not a distributor listing: -- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/sn74lvc374a.pdf) (37 pp, sha256 `78071ef9888538ba`, retrieved 2026-11-13, tier: manufacturer)+- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/sn74lvc374a.pdf) (37 pp, sha256 `78071ef9888538ba`, retrieved 2026-11-17) - **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - **CAD:** KiCad official libraries (CC-BY-SA 4.0). 
package.json+30−29
@@ -1,6 +1,6 @@ {   "slug": "sn74lvc374adwr",-  "version": "0.1.2",+  "version": "0.1.3",   "type": "component",   "description": "Texas Instruments Flip Flops, SOIC-20-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",   "tags": [@@ -53,7 +53,7 @@       "mouser": "595-SN74LVC374ADWR"     },     "distributor_check": {-      "checked_at": "2026-11-13T01:58:42Z",+      "checked_at": "2026-11-17T23:19:07Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": "296-1701-2-ND",@@ -69,121 +69,121 @@         "number": "1",         "name": "OE",         "type": "input",-        "description": "Buffered active-low output enable for the eight 3-state outputs; when OE is high the outputs go to high impedance, and OE should be tied to VCC through a pullup resistor to keep the outputs high-impedance during power up and power down."+        "description": "Buffered output-enable; when high, all eight outputs go to high impedance, and it should be tied to VCC through a pullup resistor so the outputs stay high-impedance during power up and power down."       },       {         "number": "2",         "name": "1Q",         "type": "output",-        "description": "3-state output 1, which takes the logic level of 1D on the positive CLK transition and is high impedance while OE is high."+        "description": "Output 1 takes the logic level of 1D on the positive CLK transition and is high impedance when OE is high; load current should not exceed 25 mA per output."       },       {         "number": "3",         "name": "1D",         "type": "input",-        "description": "Data input 1, which accepts voltages up to 5.5 V and is sampled on the positive transition of CLK."+        "description": "Data input 1 is latched on the positive transition of CLK, and inputs accept voltages up to 5.5 V."       },       {         "number": "4",         "name": "2D",         "type": "input",-        "description": "Data input 2, which accepts voltages up to 5.5 V and is sampled on the positive transition of CLK."+        "description": "Data input 2 is latched on the positive transition of CLK, and inputs accept voltages up to 5.5 V."       },       {         "number": "5",         "name": "2Q",         "type": "output",-        "description": "3-state output 2, which takes the logic level of 2D on the positive CLK transition and is high impedance while OE is high."+        "description": "Output 2 takes the logic level of 2D on the positive CLK transition and is high impedance when OE is high; load current should not exceed 25 mA per output."       },       {         "number": "6",         "name": "3Q",         "type": "output",-        "description": "3-state output 3, which takes the logic level of 3D on the positive CLK transition and is high impedance while OE is high."+        "description": "Output 3 takes the logic level of 3D on the positive CLK transition and is high impedance when OE is high; load current should not exceed 25 mA per output."       },       {         "number": "7",         "name": "3D",         "type": "input",-        "description": "Data input 3, which accepts voltages up to 5.5 V and is sampled on the positive transition of CLK."+        "description": "Data input 3 is latched on the positive transition of CLK, and inputs accept voltages up to 5.5 V."       },       {         "number": "8",         "name": "4D",         "type": "input",-        "description": "Data input 4, which accepts voltages up to 5.5 V and is sampled on the positive transition of CLK."+        "description": "Data input 4 is latched on the positive transition of CLK, and inputs accept voltages up to 5.5 V."       },       {         "number": "9",         "name": "4Q",         "type": "output",-        "description": "3-state output 4, which takes the logic level of 4D on the positive CLK transition and is high impedance while OE is high."+        "description": "Output 4 takes the logic level of 4D on the positive CLK transition and is high impedance when OE is high; load current should not exceed 25 mA per output."       },       {         "number": "10",         "name": "GND",         "type": "power_in",-        "description": "Ground pin; all unused inputs must be held at VCC or GND for proper device operation."+        "description": "Ground pin."       },       {         "number": "11",         "name": "CLK",         "type": "input",-        "description": "Clock input; on its positive transition the Q outputs are set to the logic levels present at the D inputs."+        "description": "Clock input; the Q outputs are set to the D input levels on its positive transition."       },       {         "number": "12",         "name": "5Q",         "type": "output",-        "description": "3-state output 5, which takes the logic level of 5D on the positive CLK transition and is high impedance while OE is high."+        "description": "Output 5 takes the logic level of 5D on the positive CLK transition and is high impedance when OE is high; load current should not exceed 25 mA per output."       },       {         "number": "13",         "name": "5D",         "type": "input",-        "description": "Data input 5, which accepts voltages up to 5.5 V and is sampled on the positive transition of CLK."+        "description": "Data input 5 is latched on the positive transition of CLK, and inputs accept voltages up to 5.5 V."       },       {         "number": "14",         "name": "6D",         "type": "input",-        "description": "Data input 6, which accepts voltages up to 5.5 V and is sampled on the positive transition of CLK."+        "description": "Data input 6 is latched on the positive transition of CLK, and inputs accept voltages up to 5.5 V."       },       {         "number": "15",         "name": "6Q",         "type": "output",-        "description": "3-state output 6, which takes the logic level of 6D on the positive CLK transition and is high impedance while OE is high."+        "description": "Output 6 takes the logic level of 6D on the positive CLK transition and is high impedance when OE is high; load current should not exceed 25 mA per output."       },       {         "number": "16",         "name": "7Q",         "type": "output",-        "description": "3-state output 7, which takes the logic level of 7D on the positive CLK transition and is high impedance while OE is high."+        "description": "Output 7 takes the logic level of 7D on the positive CLK transition and is high impedance when OE is high; load current should not exceed 25 mA per output."       },       {         "number": "17",         "name": "7D",         "type": "input",-        "description": "Data input 7, which accepts voltages up to 5.5 V and is sampled on the positive transition of CLK."+        "description": "Data input 7 is latched on the positive transition of CLK, and inputs accept voltages up to 5.5 V."       },       {         "number": "18",         "name": "8D",         "type": "input",-        "description": "Data input 8, which accepts voltages up to 5.5 V and is sampled on the positive transition of CLK."+        "description": "Data input 8 is latched on the positive transition of CLK, and inputs accept voltages up to 5.5 V."       },       {         "number": "19",         "name": "8Q",         "type": "output",-        "description": "3-state output 8, which takes the logic level of 8D on the positive CLK transition and is high impedance while OE is high."+        "description": "Output 8 takes the logic level of 8D on the positive CLK transition and is high impedance when OE is high; load current should not exceed 25 mA per output."       },       {         "number": "20",         "name": "VCC",         "type": "power_in",-        "description": "Supply pin; the SN74LVC374A is specified for 1.65 V to 3.6 V operation."+        "description": "Supply pin; the device operates from 1.65 V to 3.6 V, and a 0.1-µF bypass capacitor is recommended as close to the pin as possible."       }     ],     "provenance": {@@ -197,17 +197,18 @@         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: The pin table on page 3 is shared by the DB, DGV, DW, N, NS and PW packages. The DW pinout was taken; The datasheet never states '300 mil' for the DW package. The 7.5 mm body width on the DW0020A outlin; The orderable addendum gives this MPN an operating temperature of -40 to 85 °C, while the electrical"+          "extractor flagged: The DW pin-to-name mapping was taken from the 'Pin Functions' table on page 3 and cross-checked agai"         ],         "pages_sent": 37,-        "cost_usd": 0.122,-        "at": "2026-11-13T01:58:29"+        "cost_usd": 0.1215,+        "at": "2026-11-17T23:18:36"       },       "datasheet": {         "url": "https://www.ti.com/lit/ds/symlink/sn74lvc374a.pdf",         "pages": 37,         "sha256": "78071ef9888538ba",-        "source_tier": "mfr"+        "source_tier": "mfr",+        "citation": "Texas Instruments datasheet"       },       "cad": "KiCad official (CC-BY-SA 4.0)",       "pins": {@@ -238,7 +239,7 @@         "centre_offset_mm": 0.0,         "footprint_binding": "identity",         "sha256": "59a10b341e6972b31d81802a048060326da627d8b92dcf4263064f4f62ec808e",-        "checked": "2026-11-13",+        "checked": "2026-11-17",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -256,8 +257,8 @@         "zmin_mm": -0.0,         "centre_offset_mm": 0.0,         "footprint_binding": "identity",-        "sha256": "aec9c10de4494bc70e3e81601f697395dae6b6ddeda76a5a0606669e1623b876",-        "checked": "2026-11-13",+        "sha256": "bb9774fe021cdf2eb54f801e110cc19e6ffd7fe5c2009aca7e3046b6c72a6780",+        "checked": "2026-11-17",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ],
page.json+33−30
@@ -4,7 +4,7 @@   "slug": "sn74lvc374adwr",   "title": "SN74LVC374ADWR",   "brief": "Texas Instruments Flip Flops, SOIC-20-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",-  "version": "0.1.2",+  "version": "0.1.3",   "license": "CC-BY-SA-4.0",   "tags": [     "component",@@ -36,7 +36,7 @@       "mouser": "595-SN74LVC374ADWR"     },     "distributor_check": {-      "checked_at": "2026-11-13T01:58:42Z",+      "checked_at": "2026-11-17T23:19:07Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": "296-1701-2-ND",@@ -52,121 +52,121 @@         "number": "1",         "name": "OE",         "type": "input",-        "description": "Buffered active-low output enable for the eight 3-state outputs; when OE is high the outputs go to high impedance, and OE should be tied to VCC through a pullup resistor to keep the outputs high-impedance during power up and power down."+        "description": "Buffered output-enable; when high, all eight outputs go to high impedance, and it should be tied to VCC through a pullup resistor so the outputs stay high-impedance during power up and power down."       },       {         "number": "2",         "name": "1Q",         "type": "output",-        "description": "3-state output 1, which takes the logic level of 1D on the positive CLK transition and is high impedance while OE is high."+        "description": "Output 1 takes the logic level of 1D on the positive CLK transition and is high impedance when OE is high; load current should not exceed 25 mA per output."       },       {         "number": "3",         "name": "1D",         "type": "input",-        "description": "Data input 1, which accepts voltages up to 5.5 V and is sampled on the positive transition of CLK."+        "description": "Data input 1 is latched on the positive transition of CLK, and inputs accept voltages up to 5.5 V."       },       {         "number": "4",         "name": "2D",         "type": "input",-        "description": "Data input 2, which accepts voltages up to 5.5 V and is sampled on the positive transition of CLK."+        "description": "Data input 2 is latched on the positive transition of CLK, and inputs accept voltages up to 5.5 V."       },       {         "number": "5",         "name": "2Q",         "type": "output",-        "description": "3-state output 2, which takes the logic level of 2D on the positive CLK transition and is high impedance while OE is high."+        "description": "Output 2 takes the logic level of 2D on the positive CLK transition and is high impedance when OE is high; load current should not exceed 25 mA per output."       },       {         "number": "6",         "name": "3Q",         "type": "output",-        "description": "3-state output 3, which takes the logic level of 3D on the positive CLK transition and is high impedance while OE is high."+        "description": "Output 3 takes the logic level of 3D on the positive CLK transition and is high impedance when OE is high; load current should not exceed 25 mA per output."       },       {         "number": "7",         "name": "3D",         "type": "input",-        "description": "Data input 3, which accepts voltages up to 5.5 V and is sampled on the positive transition of CLK."+        "description": "Data input 3 is latched on the positive transition of CLK, and inputs accept voltages up to 5.5 V."       },       {         "number": "8",         "name": "4D",         "type": "input",-        "description": "Data input 4, which accepts voltages up to 5.5 V and is sampled on the positive transition of CLK."+        "description": "Data input 4 is latched on the positive transition of CLK, and inputs accept voltages up to 5.5 V."       },       {         "number": "9",         "name": "4Q",         "type": "output",-        "description": "3-state output 4, which takes the logic level of 4D on the positive CLK transition and is high impedance while OE is high."+        "description": "Output 4 takes the logic level of 4D on the positive CLK transition and is high impedance when OE is high; load current should not exceed 25 mA per output."       },       {         "number": "10",         "name": "GND",         "type": "power_in",-        "description": "Ground pin; all unused inputs must be held at VCC or GND for proper device operation."+        "description": "Ground pin."       },       {         "number": "11",         "name": "CLK",         "type": "input",-        "description": "Clock input; on its positive transition the Q outputs are set to the logic levels present at the D inputs."+        "description": "Clock input; the Q outputs are set to the D input levels on its positive transition."       },       {         "number": "12",         "name": "5Q",         "type": "output",-        "description": "3-state output 5, which takes the logic level of 5D on the positive CLK transition and is high impedance while OE is high."+        "description": "Output 5 takes the logic level of 5D on the positive CLK transition and is high impedance when OE is high; load current should not exceed 25 mA per output."       },       {         "number": "13",         "name": "5D",         "type": "input",-        "description": "Data input 5, which accepts voltages up to 5.5 V and is sampled on the positive transition of CLK."+        "description": "Data input 5 is latched on the positive transition of CLK, and inputs accept voltages up to 5.5 V."       },       {         "number": "14",         "name": "6D",         "type": "input",-        "description": "Data input 6, which accepts voltages up to 5.5 V and is sampled on the positive transition of CLK."+        "description": "Data input 6 is latched on the positive transition of CLK, and inputs accept voltages up to 5.5 V."       },       {         "number": "15",         "name": "6Q",         "type": "output",-        "description": "3-state output 6, which takes the logic level of 6D on the positive CLK transition and is high impedance while OE is high."+        "description": "Output 6 takes the logic level of 6D on the positive CLK transition and is high impedance when OE is high; load current should not exceed 25 mA per output."       },       {         "number": "16",         "name": "7Q",         "type": "output",-        "description": "3-state output 7, which takes the logic level of 7D on the positive CLK transition and is high impedance while OE is high."+        "description": "Output 7 takes the logic level of 7D on the positive CLK transition and is high impedance when OE is high; load current should not exceed 25 mA per output."       },       {         "number": "17",         "name": "7D",         "type": "input",-        "description": "Data input 7, which accepts voltages up to 5.5 V and is sampled on the positive transition of CLK."+        "description": "Data input 7 is latched on the positive transition of CLK, and inputs accept voltages up to 5.5 V."       },       {         "number": "18",         "name": "8D",         "type": "input",-        "description": "Data input 8, which accepts voltages up to 5.5 V and is sampled on the positive transition of CLK."+        "description": "Data input 8 is latched on the positive transition of CLK, and inputs accept voltages up to 5.5 V."       },       {         "number": "19",         "name": "8Q",         "type": "output",-        "description": "3-state output 8, which takes the logic level of 8D on the positive CLK transition and is high impedance while OE is high."+        "description": "Output 8 takes the logic level of 8D on the positive CLK transition and is high impedance when OE is high; load current should not exceed 25 mA per output."       },       {         "number": "20",         "name": "VCC",         "type": "power_in",-        "description": "Supply pin; the SN74LVC374A is specified for 1.65 V to 3.6 V operation."+        "description": "Supply pin; the device operates from 1.65 V to 3.6 V, and a 0.1-µF bypass capacitor is recommended as close to the pin as possible."       }     ],     "provenance": {@@ -180,17 +180,18 @@         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: The pin table on page 3 is shared by the DB, DGV, DW, N, NS and PW packages. The DW pinout was taken; The datasheet never states '300 mil' for the DW package. The 7.5 mm body width on the DW0020A outlin; The orderable addendum gives this MPN an operating temperature of -40 to 85 °C, while the electrical"+          "extractor flagged: The DW pin-to-name mapping was taken from the 'Pin Functions' table on page 3 and cross-checked agai"         ],         "pages_sent": 37,-        "cost_usd": 0.122,-        "at": "2026-11-13T01:58:29"+        "cost_usd": 0.1215,+        "at": "2026-11-17T23:18:36"       },       "datasheet": {         "url": "https://www.ti.com/lit/ds/symlink/sn74lvc374a.pdf",         "pages": 37,         "sha256": "78071ef9888538ba",-        "source_tier": "mfr"+        "source_tier": "mfr",+        "citation": "Texas Instruments datasheet"       },       "cad": "KiCad official (CC-BY-SA 4.0)",       "pins": {@@ -221,7 +222,7 @@         "centre_offset_mm": 0,         "footprint_binding": "identity",         "sha256": "59a10b341e6972b31d81802a048060326da627d8b92dcf4263064f4f62ec808e",-        "checked": "2026-11-13",+        "checked": "2026-11-17",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -239,8 +240,8 @@         "zmin_mm": 0,         "centre_offset_mm": 0,         "footprint_binding": "identity",-        "sha256": "aec9c10de4494bc70e3e81601f697395dae6b6ddeda76a5a0606669e1623b876",-        "checked": "2026-11-13",+        "sha256": "bb9774fe021cdf2eb54f801e110cc19e6ffd7fe5c2009aca7e3046b6c72a6780",+        "checked": "2026-11-17",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ],@@ -958,5 +959,7 @@   ],   "visibility": {     "public": true-  }+  },+  "description": "Texas Instruments Flip Flops, SOIC-20-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "org": "adom" }\ No newline at end of file