← Commit history
README.md+67−70
@@ -8,26 +8,26 @@ SN74LVC374ADWR from Texas Instruments, in a SOIC-20-300mil. Pinout and pin descr  | Pin | Name | Type | Function | |---|---|---|---|-| 1 | OE | input | Output enable input that places the 3-state outputs in the high-impedance state when high. |-| 2 | 1Q | tri_state | 3-state output 1 of the octal flip-flop. |-| 3 | 1D | input | Data input 1, accepts voltages up to 5.5 V. |-| 4 | 2D | input | Data input 2, accepts voltages up to 5.5 V. |-| 5 | 2Q | tri_state | 3-state output 2 of the octal flip-flop. |-| 6 | 3Q | tri_state | 3-state output 3 of the octal flip-flop. |-| 7 | 3D | input | Data input 3, accepts voltages up to 5.5 V. |-| 8 | 4D | input | Data input 4, accepts voltages up to 5.5 V. |-| 9 | 4Q | tri_state | 3-state output 4 of the octal flip-flop. |+| 1 | OE | input | Enable pin that controls the 3-state outputs; the Pin Functions table gives no polarity or electrical limit for this pin. |+| 2 | 1Q | output | Output 1 of the octal edge-triggered D-type flip-flop with 3-state outputs. |+| 3 | 1D | input | Data input 1; the inputs accept voltages up to 5.5 V per the Features list. |+| 4 | 2D | input | Data input 2; the inputs accept voltages up to 5.5 V per the Features list. |+| 5 | 2Q | output | Output 2 of the octal edge-triggered D-type flip-flop with 3-state outputs. |+| 6 | 3Q | output | Output 3 of the octal edge-triggered D-type flip-flop with 3-state outputs. |+| 7 | 3D | input | Data input 3; the inputs accept voltages up to 5.5 V per the Features list. |+| 8 | 4D | input | Data input 4; the inputs accept voltages up to 5.5 V per the Features list. |+| 9 | 4Q | output | Output 4 of the octal edge-triggered D-type flip-flop with 3-state outputs. | | 10 | GND | power_in | Ground pin. |-| 11 | CLK | input | Clock input that latches data on the rising edge. |-| 12 | 5Q | tri_state | 3-state output 5 of the octal flip-flop. |-| 13 | 5D | input | Data input 5, accepts voltages up to 5.5 V. |-| 14 | 6D | input | Data input 6, accepts voltages up to 5.5 V. |-| 15 | 6Q | tri_state | 3-state output 6 of the octal flip-flop. |-| 16 | 7Q | tri_state | 3-state output 7 of the octal flip-flop. |-| 17 | 7D | input | Data input 7, accepts voltages up to 5.5 V. |-| 18 | 8D | input | Data input 8, accepts voltages up to 5.5 V. |-| 19 | 8Q | tri_state | 3-state output 8 of the octal flip-flop. |-| 20 | VCC | power_in | Power supply pin, 1.65 V to 3.6 V operation for SN74LVC374A. |+| 11 | CLK | input | Clock input for the edge-triggered flip-flops; the Pin Functions table gives no edge polarity or electrical limit. |+| 12 | 5Q | output | Output 5 of the octal edge-triggered D-type flip-flop with 3-state outputs. |+| 13 | 5D | input | Data input 5; the inputs accept voltages up to 5.5 V per the Features list. |+| 14 | 6D | input | Data input 6; the inputs accept voltages up to 5.5 V per the Features list. |+| 15 | 6Q | output | Output 6 of the octal edge-triggered D-type flip-flop with 3-state outputs. |+| 16 | 7Q | output | Output 7 of the octal edge-triggered D-type flip-flop with 3-state outputs. |+| 17 | 7D | input | Data input 7; the inputs accept voltages up to 5.5 V per the Features list. |+| 18 | 8D | input | Data input 8; the inputs accept voltages up to 5.5 V per the Features list. |+| 19 | 8Q | output | Output 8 of the octal edge-triggered D-type flip-flop with 3-state outputs. |+| 20 | VCC | power_in | Supply pin; the device operates from 1.65 V to 3.6 V per the Features list. |  ## Key specifications @@ -44,18 +44,7 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries  | Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page | |---|---|---|---|---|---|---|---|-| Supply voltage range | VCC | -0.5 |  | 6.5 | V |  | 4 |-| Input voltage range | VI | -0.5 |  | 6.5 | V |  | 4 |-| Output voltage, high-impedance or power-off state | VO | -0.5 |  | 6.5 | V | any output in high-impedance or power-off state | 4 |-| Output voltage, high or low state | VO | -0.5 |  |  | V | any output in high or low state; max is VCC + 0.5 V | 4 |-| Input clamp current | IIK |  |  | -50 | mA | VI < 0 | 4 |-| Output clamp current | IOK |  |  | -50 | mA | VO < 0 | 4 |-| Continuous output current | IO | -50 |  | 50 | mA |  | 4 |-| Continuous current through VCC or GND |  | -100 |  | 100 | mA |  | 4 |-| Storage temperature range | Tstg | -65 |  | 150 | °C |  | 4 |-| ESD, human body model | V(ESD) | 0 |  | 2 | kV | HBM per ANSI/ESDA/JEDEC JS-001, all pins | 4 |-| ESD, charged device model | V(ESD) | 0 |  | 1000 | V | CDM per JESD22-C101, all pins | 4 |-| Supply voltage, operating | VCC | 1.65 |  | 3.6 | V | Operating | 5 |+| Supply voltage, operating | VCC | 1.65 |  | 3.6 | V |  | 5 | | Supply voltage, data retention only | VCC | 1.5 |  |  | V | Data retention only | 5 | | High-level input voltage | VIH | 1.7 |  |  | V | VCC = 2.3 V to 2.7 V | 5 | | High-level input voltage | VIH | 2 |  |  | V | VCC = 2.7 V to 3.6 V | 5 |@@ -63,45 +52,53 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries | Low-level input voltage | VIL |  |  | 0.8 | V | VCC = 2.7 V to 3.6 V | 5 | | Input voltage | VI | 0 |  | 5.5 | V |  | 5 | | Output voltage, 3-state | VO | 0 |  | 5.5 | V | 3-state | 5 |-| High-level output current | IOH |  |  | -4 | mA | VCC = 1.65 V | 5 |-| High-level output current | IOH |  |  | -8 | mA | VCC = 2.3 V | 5 |-| High-level output current | IOH |  |  | -12 | mA | VCC = 2.7 V | 5 |-| High-level output current | IOH |  |  | -24 | mA | VCC = 3 V | 5 |+| Output voltage, high or low state | VO | 0 |  |  | V | High or low state | 5 |+| High-level output current | IOH | -4 |  |  | mA | VCC = 1.65 V | 5 |+| High-level output current | IOH | -8 |  |  | mA | VCC = 2.3 V | 5 |+| High-level output current | IOH | -12 |  |  | mA | VCC = 2.7 V | 5 |+| High-level output current | IOH | -24 |  |  | mA | VCC = 3 V | 5 |+| Low-level output current | IOL |  |  | 4 | mA | VCC = 1.65 V | 5 |+| Low-level output current | IOL |  |  | 8 | mA | VCC = 2.3 V | 5 |+| Low-level output current | IOL |  |  | 12 | mA | VCC = 2.7 V | 5 | | Low-level output current | IOL |  |  | 24 | mA | VCC = 3 V | 5 | | Input transition rise or fall rate | Δt/Δv |  |  | 10 | ns/V |  | 5 |-| Operating free-air temperature | TA | -40 |  | 125 | °C |  | 5 |-| High-level output voltage | VOH | 1.2 |  |  | V | IOH = -4 mA, VCC = 1.65 V | 6 |-| High-level output voltage | VOH | 1.7 |  |  | V | IOH = -8 mA, VCC = 2.3 V | 6 |-| High-level output voltage | VOH | 2.2 |  |  | V | IOH = -12 mA, VCC = 2.7 V | 6 |-| High-level output voltage | VOH | 2.4 |  |  | V | IOH = -12 mA, VCC = 3 V | 6 |-| Low-level output voltage | VOL |  |  | 0.2 | V | IOL = 100 μA, VCC = 1.65 V to 3.6 V | 6 |-| Low-level output voltage | VOL |  |  | 0.45 | V | IOL = 4 mA, VCC = 1.65 V | 6 |-| Low-level output voltage | VOL |  |  | 0.7 | V | IOL = 8 mA, VCC = 2.3 V | 6 |-| Low-level output voltage | VOL |  |  | 0.4 | V | IOL = 12 mA, VCC = 2.7 V | 6 |-| Low-level output voltage | VOL |  |  | 0.55 | V | IOL = 24 mA, VCC = 3 V | 6 |-| Input current | II | -5 |  | 5 | μA | VI = 0 to 5.5 V, VCC = 3.6 V | 6 |-| Power-off leakage current | Ioff | -10 |  | 10 | μA | VI or VO = 5.5 V, VCC = 0 | 6 |-| Off-state output current | IOZ | -10 |  | 10 | μA | VO = 0 to 5.5 V, VCC = 3.6 V | 6 |-| Supply current | ICC |  |  | 10 | μA | VI = VCC or GND, IO = 0, VCC = 3.6 V | 6 |-| Supply current change | ΔICC |  |  | 500 | μA | One input at VCC, 0.6 V, other inputs at VCC or GND, VCC = 2.7 V to 3.6 V | 6 |-| Input capacitance | Ci |  | 4 |  | pF | VI = VCC or GND, VCC = 3.3 V | 6 |-| Output capacitance | Co |  | 5.5 |  | pF | VO = VCC or GND, VCC = 3.3 V | 6 |-| Clock frequency | fclock |  |  | 100 | MHz | VCC = 3.3 V ± 0.3 V, -40°C to 85°C | 7 |-| Clock frequency | fclock |  |  | 80 | MHz | VCC = 2.7 V, -40°C to 85°C | 7 |-| Pulse duration, CLK high or low | tw | 3.3 |  |  | ns | VCC = 3.3 V ± 0.3 V, -40°C to 85°C | 7 |-| Setup time, data before CLK↑ | tsu | 2 |  |  | ns | VCC = 3.3 V ± 0.3 V, -40°C to 85°C | 7 |-| Hold time, data after CLK↑ | th | 1.5 |  |  | ns | VCC = 3.3 V ± 0.3 V, -40°C to 85°C | 7 |-| Pulse duration, CLK high or low | tw | 9 |  |  | ns | VCC = 1.8 V ± 0.15 V, -40°C to 85°C | 7 |-| Setup time, data before CLK↑ | tsu | 6 |  |  | ns | VCC = 1.8 V ± 0.15 V, -40°C to 85°C | 7 |-| Hold time, data after CLK↑ | th | 4 |  |  | ns | VCC = 1.8 V ± 0.15 V, -40°C to 85°C | 7 |-| Maximum clock frequency | fmax | 100 |  |  | MHz | VCC = 3.3 V ± 0.3 V, -40°C to 85°C | 8 |-| Propagation delay, CLK to Q | tpd | 1.5 |  | 7 | ns | VCC = 3.3 V ± 0.3 V, -40°C to 85°C | 8 |-| Enable time, OE to Q | ten | 1.5 |  | 7.5 | ns | VCC = 3.3 V ± 0.3 V, -40°C to 85°C | 8 |-| Disable time, OE to Q | tdis | 1.5 |  | 6.5 | ns | VCC = 3.3 V ± 0.3 V, -40°C to 85°C | 8 |-| Propagation delay, CLK to Q | tpd |  |  | 8.1 | ns | VCC = 2.7 V, -40°C to 85°C | 8 |-| Propagation delay, CLK to Q | tpd |  |  | 21.9 | ns | VCC = 1.8 V ± 0.15 V, -40°C to 85°C | 8 |-| Output skew | tsk(o) |  |  | 1 | ns | VCC = 3.3 V ± 0.3 V, -40°C to 85°C | 8 |-| Power dissipation capacitance per flip-flop, outputs enabled | Cpd |  | 54.5 |  | pF | VCC = 3.3 V, TA = 25°C, f = 10 MHz | 8 |+| Operating free-air temperature | TA | -40 |  | 125 | °C | SN74LVC374A | 5 |+| Supply voltage range | VCC | -0.5 |  | 6.5 | V |  | 4 |+| Input voltage range | VI | -0.5 |  | 6.5 | V |  | 4 |+| Voltage range applied to any output in the high-impedance or power-off state | VO | -0.5 |  | 6.5 | V | High-impedance or power-off state | 4 |+| Voltage range applied to any output in the high or low state | VO | -0.5 |  |  | V | High or low state; printed as VCC + 0.5 V | 4 |+| Input clamp current | IIK | -50 |  |  | mA | VI < 0 | 4 |+| Output clamp current | IOK | -50 |  |  | mA | VO < 0 | 4 |+| Continuous output current | IO | -50 |  | 50 | mA |  | 4 |+| Continuous current through VCC or GND | ICC | -100 |  | 100 | mA |  | 4 |+| Storage temperature range | Tstg | -65 |  | 150 | °C |  | 4 |+| Electrostatic discharge, human body model | V(ESD) | 0 |  | 2 | kV | Human body model (HBM), per ANSI/ESDA/JEDEC JS-001, all pins | 4 |+| Electrostatic discharge, charged device model | V(ESD) | 0 |  | 1000 | V | Charged device model (CDM), per JEDEC JESD22-C101, all pins | 4 |+| High-level output voltage | VOH | 1.2 |  |  | V | IOH = -4 mA; VCC = 1.65 V | 6 |+| High-level output voltage | VOH | 1.7 |  |  | V | IOH = -8 mA; VCC = 2.3 V | 6 |+| High-level output voltage | VOH | 2.2 |  |  | V | IOH = -12 mA; VCC = 2.7 V | 6 |+| High-level output voltage | VOH | 2.4 |  |  | V | IOH = -24 mA; VCC = 3 V | 6 |+| Low-level output voltage | VOL |  |  | 0.2 | V | IOL = 100 μA; VCC = 1.65 V to 3.6 V | 6 |+| Low-level output voltage | VOL |  |  | 0.45 | V | IOL = 4 mA; VCC = 1.65 V | 6 |+| Low-level output voltage | VOL |  |  | 0.7 | V | IOL = 8 mA; VCC = 2.3 V | 6 |+| Low-level output voltage | VOL |  |  | 0.4 | V | IOL = 12 mA; VCC = 2.7 V | 6 |+| Low-level output voltage | VOL |  |  | 0.55 | V | IOL = 24 mA; VCC = 3 V | 6 |+| Input leakage current | II | -5 |  | 5 | μA | VI = 0 to 5.5 V; VCC = 3.6 V | 6 |+| Power-off leakage current | Ioff | -20 |  | 20 | μA | VI or VO = 5.5 V; VCC = 0 | 6 |+| 3-state output leakage current | IOZ | -10 |  | 10 | μA | VO = 0 to 5.5 V; VCC = 3.6 V | 6 |+| Quiescent supply current | ICC |  |  | 10 | μA | VI = VCC or GND; IO = 0; VCC = 3.6 V | 6 |+| Additional quiescent supply current per input | ΔICC |  |  | 500 | μA | One input at VCC, 0.6 V, other inputs at VCC or GND; VCC = 2.7 V to 3.6 V | 6 |+| Input capacitance | Ci |  | 4 | 12 | pF | VI = VCC or GND; VCC = 3.3 V | 6 |+| Output capacitance | Co |  | 5.5 | 12 | pF | VO = VCC or GND; VCC = 3.3 V | 6 |+| Clock frequency | fclock | 80 |  | 100 | MHz | VCC = 3.3 V ± 0.3 V | 7 |+| Pulse duration, CLK high or low | tw | 3.3 |  |  | ns | VCC = 3.3 V ± 0.3 V | 7 |+| Setup time, data before CLK↑ | tsu | 2 |  |  | ns | VCC = 3.3 V ± 0.3 V | 7 |+| Hold time, data after CLK↑ | th | 1.5 |  |  | ns | VCC = 3.3 V ± 0.3 V | 7 |+| Maximum clock frequency | fmax | 80 |  | 100 | MHz | VCC = 3.3 V ± 0.3 V | 8 |+| Propagation delay CLK to Q | tpd | 1.5 |  | 7.6 | ns | VCC = 3.3 V ± 0.3 V; -40°C to 125°C | 8 |+| Enable time OE to Q | ten | 1.5 |  | 8 | ns | VCC = 3.3 V ± 0.3 V; -40°C to 125°C | 8 |+| Disable time OE to Q | tdis | 1.5 |  | 7 | ns | VCC = 3.3 V ± 0.3 V; -40°C to 125°C | 8 |+| Output skew | tsk(o) |  |  | 1.5 | ns | VCC = 3.3 V ± 0.3 V; -40°C to 125°C | 8 |  ## CAD (KiCad official) @@ -114,8 +111,8 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries  Data extracted from the manufacturer datasheet, not a distributor listing: -- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/sn74lvc374adwr.pdf) (40 pp, sha256 `d3411a523d5a87fb`, retrieved 2026-11-12, tier: manufacturer)-- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/sn74lvc374a.pdf) (37 pp, sha256 `78071ef9888538ba`, retrieved 2026-11-12, tier: manufacturer)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - **CAD:** KiCad official libraries (CC-BY-SA 4.0).  [Datasheet PDF](docs/sn74lvc374adwr-datasheet.pdf)
docs/sn74lvc374adwr-datasheet.pdf
⋯ 1 unchanged line ⋯
package.json+41−41
@@ -1,6 +1,6 @@ {   "slug": "sn74lvc374adwr",-  "version": "0.1.0",+  "version": "0.1.1",   "type": "component",   "description": "Texas Instruments Flip Flops, SOIC-20-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",   "tags": [@@ -38,7 +38,7 @@     "pin_count": 20,     "category": "Logic ICs",     "subcategory": "Flip Flops",-    "datasheet": "https://www.ti.com/lit/ds/symlink/sn74lvc374adwr.pdf",+    "datasheet": "https://www.ti.com/lit/ds/symlink/sn74lvc374a.pdf",     "parts": {       "symbol": "sn74lvc374adwr.kicad_sym",       "footprint": "sn74lvc374adwr.kicad_mod",@@ -54,7 +54,7 @@       "mouser": "595-SN74LVC374ADWR"     },     "distributor_check": {-      "checked_at": "2026-11-12T04:58:38Z",+      "checked_at": "2026-11-12T08:00:02Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": "296-1701-2-ND",@@ -70,55 +70,55 @@         "number": "1",         "name": "OE",         "type": "input",-        "description": "Output enable input that places the 3-state outputs in the high-impedance state when high."+        "description": "Enable pin that controls the 3-state outputs; the Pin Functions table gives no polarity or electrical limit for this pin."       },       {         "number": "2",         "name": "1Q",-        "type": "tri_state",-        "description": "3-state output 1 of the octal flip-flop."+        "type": "output",+        "description": "Output 1 of the octal edge-triggered D-type flip-flop with 3-state outputs."       },       {         "number": "3",         "name": "1D",         "type": "input",-        "description": "Data input 1, accepts voltages up to 5.5 V."+        "description": "Data input 1; the inputs accept voltages up to 5.5 V per the Features list."       },       {         "number": "4",         "name": "2D",         "type": "input",-        "description": "Data input 2, accepts voltages up to 5.5 V."+        "description": "Data input 2; the inputs accept voltages up to 5.5 V per the Features list."       },       {         "number": "5",         "name": "2Q",-        "type": "tri_state",-        "description": "3-state output 2 of the octal flip-flop."+        "type": "output",+        "description": "Output 2 of the octal edge-triggered D-type flip-flop with 3-state outputs."       },       {         "number": "6",         "name": "3Q",-        "type": "tri_state",-        "description": "3-state output 3 of the octal flip-flop."+        "type": "output",+        "description": "Output 3 of the octal edge-triggered D-type flip-flop with 3-state outputs."       },       {         "number": "7",         "name": "3D",         "type": "input",-        "description": "Data input 3, accepts voltages up to 5.5 V."+        "description": "Data input 3; the inputs accept voltages up to 5.5 V per the Features list."       },       {         "number": "8",         "name": "4D",         "type": "input",-        "description": "Data input 4, accepts voltages up to 5.5 V."+        "description": "Data input 4; the inputs accept voltages up to 5.5 V per the Features list."       },       {         "number": "9",         "name": "4Q",-        "type": "tri_state",-        "description": "3-state output 4 of the octal flip-flop."+        "type": "output",+        "description": "Output 4 of the octal edge-triggered D-type flip-flop with 3-state outputs."       },       {         "number": "10",@@ -130,61 +130,61 @@         "number": "11",         "name": "CLK",         "type": "input",-        "description": "Clock input that latches data on the rising edge."+        "description": "Clock input for the edge-triggered flip-flops; the Pin Functions table gives no edge polarity or electrical limit."       },       {         "number": "12",         "name": "5Q",-        "type": "tri_state",-        "description": "3-state output 5 of the octal flip-flop."+        "type": "output",+        "description": "Output 5 of the octal edge-triggered D-type flip-flop with 3-state outputs."       },       {         "number": "13",         "name": "5D",         "type": "input",-        "description": "Data input 5, accepts voltages up to 5.5 V."+        "description": "Data input 5; the inputs accept voltages up to 5.5 V per the Features list."       },       {         "number": "14",         "name": "6D",         "type": "input",-        "description": "Data input 6, accepts voltages up to 5.5 V."+        "description": "Data input 6; the inputs accept voltages up to 5.5 V per the Features list."       },       {         "number": "15",         "name": "6Q",-        "type": "tri_state",-        "description": "3-state output 6 of the octal flip-flop."+        "type": "output",+        "description": "Output 6 of the octal edge-triggered D-type flip-flop with 3-state outputs."       },       {         "number": "16",         "name": "7Q",-        "type": "tri_state",-        "description": "3-state output 7 of the octal flip-flop."+        "type": "output",+        "description": "Output 7 of the octal edge-triggered D-type flip-flop with 3-state outputs."       },       {         "number": "17",         "name": "7D",         "type": "input",-        "description": "Data input 7, accepts voltages up to 5.5 V."+        "description": "Data input 7; the inputs accept voltages up to 5.5 V per the Features list."       },       {         "number": "18",         "name": "8D",         "type": "input",-        "description": "Data input 8, accepts voltages up to 5.5 V."+        "description": "Data input 8; the inputs accept voltages up to 5.5 V per the Features list."       },       {         "number": "19",         "name": "8Q",-        "type": "tri_state",-        "description": "3-state output 8 of the octal flip-flop."+        "type": "output",+        "description": "Output 8 of the octal edge-triggered D-type flip-flop with 3-state outputs."       },       {         "number": "20",         "name": "VCC",         "type": "power_in",-        "description": "Power supply pin, 1.65 V to 3.6 V operation for SN74LVC374A."+        "description": "Supply pin; the device operates from 1.65 V to 3.6 V per the Features list."       }     ],     "provenance": {@@ -192,22 +192,22 @@       "factory_chain": {         "factory": "2.0.0",         "extractor": "extract_pins 0.3",-        "primary_model": "claude-sonnet-5-5",+        "primary_model": "claude-haiku-5-5",         "primary_mode": "text",         "consensus_model": "claude-sonnet-5-5",         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: Pin Functions table only says OE is 'Enable pin'; the active-low polarity (OE high gives high-impeda; The datasheet lists the output pins as type O. I classified them as tri_state because the title says"+          "extractor flagged: The pin table on page 3 is shared by the DB, DGV, DW, N, NS and PW packages and does not label each ; The Pin Functions table gives only a name and a short function for each pin. No per-pin voltage, cur; OE and CLK polarity or active edge are not given in the excerpt provided (the function table is not "         ],-        "pages_sent": 8,-        "cost_usd": 0.0902,-        "at": "2026-11-12T04:58:16"+        "pages_sent": 9,+        "cost_usd": 0.0592,+        "at": "2026-11-12T07:59:34"       },       "datasheet": {-        "url": "https://www.ti.com/lit/ds/symlink/sn74lvc374adwr.pdf",-        "pages": 40,-        "sha256": "d3411a523d5a87fb",+        "url": "https://www.ti.com/lit/ds/symlink/sn74lvc374a.pdf",+        "pages": 37,+        "sha256": "78071ef9888538ba",         "source_tier": "mfr"       },       "cad": "KiCad official (CC-BY-SA 4.0)",@@ -257,14 +257,14 @@         "zmin_mm": -0.0,         "centre_offset_mm": 0.0,         "footprint_binding": "identity",-        "sha256": "46a1a292548cced148a15b9b645e7b9499101548f6a42bdad6e667e655b0121d",+        "sha256": "c904c100aa810712394bdb55dff4c38e5008d4b544ba8f44067c22f1fab0e4ea",         "checked": "2026-11-12",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ],     "package_dims": {-      "package_code": "DW0020A",-      "source_page": 37,+      "package_code": "DW",+      "source_page": 26,       "D": {         "nom_mm": 12.8,         "range_mm": [
page.json+44−42
@@ -4,7 +4,7 @@   "slug": "sn74lvc374adwr",   "title": "SN74LVC374ADWR",   "brief": "Texas Instruments Flip Flops, SOIC-20-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",-  "version": "0.1.0",+  "version": "0.1.1",   "license": "CC-BY-SA-4.0",   "tags": [     "component",@@ -20,7 +20,7 @@     "pin_count": 20,     "category": "Logic ICs",     "subcategory": "Flip Flops",-    "datasheet": "https://www.ti.com/lit/ds/symlink/sn74lvc374adwr.pdf",+    "datasheet": "https://www.ti.com/lit/ds/symlink/sn74lvc374a.pdf",     "parts": {       "symbol": "sn74lvc374adwr.kicad_sym",       "footprint": "sn74lvc374adwr.kicad_mod",@@ -36,7 +36,7 @@       "mouser": "595-SN74LVC374ADWR"     },     "distributor_check": {-      "checked_at": "2026-11-12T04:58:38Z",+      "checked_at": "2026-11-12T08:00:02Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": "296-1701-2-ND",@@ -52,55 +52,55 @@         "number": "1",         "name": "OE",         "type": "input",-        "description": "Output enable input that places the 3-state outputs in the high-impedance state when high."+        "description": "Enable pin that controls the 3-state outputs; the Pin Functions table gives no polarity or electrical limit for this pin."       },       {         "number": "2",         "name": "1Q",-        "type": "tri_state",-        "description": "3-state output 1 of the octal flip-flop."+        "type": "output",+        "description": "Output 1 of the octal edge-triggered D-type flip-flop with 3-state outputs."       },       {         "number": "3",         "name": "1D",         "type": "input",-        "description": "Data input 1, accepts voltages up to 5.5 V."+        "description": "Data input 1; the inputs accept voltages up to 5.5 V per the Features list."       },       {         "number": "4",         "name": "2D",         "type": "input",-        "description": "Data input 2, accepts voltages up to 5.5 V."+        "description": "Data input 2; the inputs accept voltages up to 5.5 V per the Features list."       },       {         "number": "5",         "name": "2Q",-        "type": "tri_state",-        "description": "3-state output 2 of the octal flip-flop."+        "type": "output",+        "description": "Output 2 of the octal edge-triggered D-type flip-flop with 3-state outputs."       },       {         "number": "6",         "name": "3Q",-        "type": "tri_state",-        "description": "3-state output 3 of the octal flip-flop."+        "type": "output",+        "description": "Output 3 of the octal edge-triggered D-type flip-flop with 3-state outputs."       },       {         "number": "7",         "name": "3D",         "type": "input",-        "description": "Data input 3, accepts voltages up to 5.5 V."+        "description": "Data input 3; the inputs accept voltages up to 5.5 V per the Features list."       },       {         "number": "8",         "name": "4D",         "type": "input",-        "description": "Data input 4, accepts voltages up to 5.5 V."+        "description": "Data input 4; the inputs accept voltages up to 5.5 V per the Features list."       },       {         "number": "9",         "name": "4Q",-        "type": "tri_state",-        "description": "3-state output 4 of the octal flip-flop."+        "type": "output",+        "description": "Output 4 of the octal edge-triggered D-type flip-flop with 3-state outputs."       },       {         "number": "10",@@ -112,61 +112,61 @@         "number": "11",         "name": "CLK",         "type": "input",-        "description": "Clock input that latches data on the rising edge."+        "description": "Clock input for the edge-triggered flip-flops; the Pin Functions table gives no edge polarity or electrical limit."       },       {         "number": "12",         "name": "5Q",-        "type": "tri_state",-        "description": "3-state output 5 of the octal flip-flop."+        "type": "output",+        "description": "Output 5 of the octal edge-triggered D-type flip-flop with 3-state outputs."       },       {         "number": "13",         "name": "5D",         "type": "input",-        "description": "Data input 5, accepts voltages up to 5.5 V."+        "description": "Data input 5; the inputs accept voltages up to 5.5 V per the Features list."       },       {         "number": "14",         "name": "6D",         "type": "input",-        "description": "Data input 6, accepts voltages up to 5.5 V."+        "description": "Data input 6; the inputs accept voltages up to 5.5 V per the Features list."       },       {         "number": "15",         "name": "6Q",-        "type": "tri_state",-        "description": "3-state output 6 of the octal flip-flop."+        "type": "output",+        "description": "Output 6 of the octal edge-triggered D-type flip-flop with 3-state outputs."       },       {         "number": "16",         "name": "7Q",-        "type": "tri_state",-        "description": "3-state output 7 of the octal flip-flop."+        "type": "output",+        "description": "Output 7 of the octal edge-triggered D-type flip-flop with 3-state outputs."       },       {         "number": "17",         "name": "7D",         "type": "input",-        "description": "Data input 7, accepts voltages up to 5.5 V."+        "description": "Data input 7; the inputs accept voltages up to 5.5 V per the Features list."       },       {         "number": "18",         "name": "8D",         "type": "input",-        "description": "Data input 8, accepts voltages up to 5.5 V."+        "description": "Data input 8; the inputs accept voltages up to 5.5 V per the Features list."       },       {         "number": "19",         "name": "8Q",-        "type": "tri_state",-        "description": "3-state output 8 of the octal flip-flop."+        "type": "output",+        "description": "Output 8 of the octal edge-triggered D-type flip-flop with 3-state outputs."       },       {         "number": "20",         "name": "VCC",         "type": "power_in",-        "description": "Power supply pin, 1.65 V to 3.6 V operation for SN74LVC374A."+        "description": "Supply pin; the device operates from 1.65 V to 3.6 V per the Features list."       }     ],     "provenance": {@@ -174,22 +174,22 @@       "factory_chain": {         "factory": "2.0.0",         "extractor": "extract_pins 0.3",-        "primary_model": "claude-sonnet-5-5",+        "primary_model": "claude-haiku-5-5",         "primary_mode": "text",         "consensus_model": "claude-sonnet-5-5",         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: Pin Functions table only says OE is 'Enable pin'; the active-low polarity (OE high gives high-impeda; The datasheet lists the output pins as type O. I classified them as tri_state because the title says"+          "extractor flagged: The pin table on page 3 is shared by the DB, DGV, DW, N, NS and PW packages and does not label each ; The Pin Functions table gives only a name and a short function for each pin. No per-pin voltage, cur; OE and CLK polarity or active edge are not given in the excerpt provided (the function table is not "         ],-        "pages_sent": 8,-        "cost_usd": 0.0902,-        "at": "2026-11-12T04:58:16"+        "pages_sent": 9,+        "cost_usd": 0.0592,+        "at": "2026-11-12T07:59:34"       },       "datasheet": {-        "url": "https://www.ti.com/lit/ds/symlink/sn74lvc374adwr.pdf",-        "pages": 40,-        "sha256": "d3411a523d5a87fb",+        "url": "https://www.ti.com/lit/ds/symlink/sn74lvc374a.pdf",+        "pages": 37,+        "sha256": "78071ef9888538ba",         "source_tier": "mfr"       },       "cad": "KiCad official (CC-BY-SA 4.0)",@@ -239,14 +239,14 @@         "zmin_mm": 0,         "centre_offset_mm": 0,         "footprint_binding": "identity",-        "sha256": "46a1a292548cced148a15b9b645e7b9499101548f6a42bdad6e667e655b0121d",+        "sha256": "c904c100aa810712394bdb55dff4c38e5008d4b544ba8f44067c22f1fab0e4ea",         "checked": "2026-11-12",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ],     "package_dims": {-      "package_code": "DW0020A",-      "source_page": 37,+      "package_code": "DW",+      "source_page": 26,       "D": {         "nom_mm": 12.8,         "range_mm": [@@ -1043,5 +1043,7 @@   ],   "visibility": {     "public": true-  }+  },+  "description": "Texas Instruments Flip Flops, SOIC-20-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "org": "adom" }\ No newline at end of file
sn74lvc374adwr-hero.overlay.json+527−522
@@ -1,524 +1,529 @@ {-  "spec": "adom-hero 1.4",-  "mpn": "SN74LVC374ADWR",-  "kind": "component + footprint reference art",-  "board_use": false,-  "plane_z_mm": -0.02,-  "units": "metre",-  "upAxis": "Z",-  "layers": {-    "pad_outlines": {-      "material": "Footprint pads - teal dashed outlines - 50 percent opacity",-      "rgba": [-        0.0,-        0.902,-        0.863,-        0.5-      ],-      "pads": 20,-      "span_mm": 12.03,-      "dash_mm": 0.3008,-      "gap_mm": 0.1804,-      "pad_stroke_mm": 0.0722-    },-    "silkscreen": {-      "material": "Silkscreen reference lines - 30 percent opacity",-      "rgba": [-        0.92,-        0.96,-        1.0,-        0.3-      ],-      "footprint_items": 7,-      "pin1": {-        "source": "footprint silkscreen",-        "pad": "1"-      }-    },-    "signal_names": {-      "material": "Signal names - 50 percent opacity",-      "rgba": [-        0.92,-        0.96,-        1.0,-        0.5-      ],-      "font": "DejaVu Sans Mono",-      "labels": 20,-      "sides": "top + mirrored underside (single-sided)",-      "fallback_to_pad_number": 0-    }-  },-  "align": {-    "ok": true,-    "centre_offset_mm": 0.0,-    "tolerance_mm": 0.962,-    "orientation_flipped": false,-    "contacts_bbox_mm": [-      -5.15,-      5.15,-      -5.92,-      5.92-    ],-    "pads_bbox_mm": [-      -5.675,-      5.675,-      -6.015,-      6.015-    ],-    "seating_z_mm": -0.0-  },-  "sources": {-    "glb": "sn74lvc374adwr-etched.glb",-    "glb_sha256": "8dcbf479de14e192f5737431c06e795e3e8a25c7ffcbe43d6eccfc3db3bc1508",-    "footprint": "sn74lvc374adwr.kicad_mod",-    "footprint_sha256": "9783bc19f518a72442ddbfe6289e767a42c3d23358b65c3447b6a36bdd0e7dcf",-    "pins": "page.json component.pins",-    "pins_sha256": "045546e90334dddb23668cb225e238e395fe454774867b24f18cb4741bae2988"-  },-  "generator": "adom-wiki 1.8.22 (component_hero)",-  "labels": [-    {-      "pad": "1",-      "text": "OE",-      "x": -5.825,-      "y": -5.715,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "2",-      "text": "1Q",-      "x": -5.825,-      "y": -4.445,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "3",-      "text": "1D",-      "x": -5.825,-      "y": -3.175,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "4",-      "text": "2D",-      "x": -5.825,-      "y": -1.905,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "5",-      "text": "2Q",-      "x": -5.825,-      "y": -0.635,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "6",-      "text": "3Q",-      "x": -5.825,-      "y": 0.635,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "7",-      "text": "3D",-      "x": -5.825,-      "y": 1.905,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "8",-      "text": "4D",-      "x": -5.825,-      "y": 3.175,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "9",-      "text": "4Q",-      "x": -5.825,-      "y": 4.445,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "10",-      "text": "GND",-      "x": -5.825,-      "y": 5.715,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "11",-      "text": "CLK",-      "x": 5.825,-      "y": 5.715,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "12",-      "text": "5Q",-      "x": 5.825,-      "y": 4.445,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "13",-      "text": "5D",-      "x": 5.825,-      "y": 3.175,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "14",-      "text": "6D",-      "x": 5.825,-      "y": 1.905,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "15",-      "text": "6Q",-      "x": 5.825,-      "y": 0.635,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "16",-      "text": "7Q",-      "x": 5.825,-      "y": -0.635,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "17",-      "text": "7D",-      "x": 5.825,-      "y": -1.905,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "18",-      "text": "8D",-      "x": 5.825,-      "y": -3.175,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "19",-      "text": "8Q",-      "x": 5.825,-      "y": -4.445,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "20",-      "text": "VCC",-      "x": 5.825,-      "y": -5.715,-      "align": "left",-      "vertical": false,-      "h": 0.6-    }+ "spec": "adom-hero 1.4",+ "mpn": "SN74LVC374ADWR",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+  "pad_outlines": {+   "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+   "rgba": [+    0.0,+    0.902,+    0.863,+    0.5+   ],+   "pads": 20,+   "span_mm": 12.03,+   "dash_mm": 0.3008,+   "gap_mm": 0.1804,+   "pad_stroke_mm": 0.0722+  },+  "silkscreen": {+   "material": "Silkscreen reference lines - 30 percent opacity",+   "rgba": [+    0.92,+    0.96,+    1.0,+    0.3+   ],+   "footprint_items": 7,+   "pin1": {+    "source": "footprint silkscreen",+    "pad": "1"+   }+  },+  "signal_names": {+   "material": "Signal names - 50 percent opacity",+   "rgba": [+    0.92,+    0.96,+    1.0,+    0.5+   ],+   "font": "DejaVu Sans Mono",+   "labels": 20,+   "sides": "top + mirrored underside (single-sided)",+   "omitted": null,+   "fallback_to_pad_number": 0+  }+ },+ "align": {+  "ok": true,+  "board_underside": true,+  "electrical_pads_without_contact": [],+  "mounting_pads_left_out": [],+  "centre_offset_mm": 0.0,+  "over_pads": true,+  "tolerance_mm": 0.962,+  "orientation_flipped": false,+  "contacts_bbox_mm": [+   -5.15,+   5.15,+   -5.92,+   5.92+  ],+  "pads_bbox_mm": [+   -5.675,+   5.675,+   -6.015,+   6.015   ],-  "pads": [-    {-      "number": "1",-      "shape": "roundrect",-      "center_mm": [-        -4.65,-        -5.715-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "2",-      "shape": "roundrect",-      "center_mm": [-        -4.65,-        -4.445-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "3",-      "shape": "roundrect",-      "center_mm": [-        -4.65,-        -3.175-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "4",-      "shape": "roundrect",-      "center_mm": [-        -4.65,-        -1.905-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "5",-      "shape": "roundrect",-      "center_mm": [-        -4.65,-        -0.635-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "6",-      "shape": "roundrect",-      "center_mm": [-        -4.65,-        0.635-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "7",-      "shape": "roundrect",-      "center_mm": [-        -4.65,-        1.905-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "8",-      "shape": "roundrect",-      "center_mm": [-        -4.65,-        3.175-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "9",-      "shape": "roundrect",-      "center_mm": [-        -4.65,-        4.445-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "10",-      "shape": "roundrect",-      "center_mm": [-        -4.65,-        5.715-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "11",-      "shape": "roundrect",-      "center_mm": [-        4.65,-        5.715-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "12",-      "shape": "roundrect",-      "center_mm": [-        4.65,-        4.445-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "13",-      "shape": "roundrect",-      "center_mm": [-        4.65,-        3.175-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "14",-      "shape": "roundrect",-      "center_mm": [-        4.65,-        1.905-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "15",-      "shape": "roundrect",-      "center_mm": [-        4.65,-        0.635-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "16",-      "shape": "roundrect",-      "center_mm": [-        4.65,-        -0.635-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "17",-      "shape": "roundrect",-      "center_mm": [-        4.65,-        -1.905-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "18",-      "shape": "roundrect",-      "center_mm": [-        4.65,-        -3.175-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "19",-      "shape": "roundrect",-      "center_mm": [-        4.65,-        -4.445-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "20",-      "shape": "roundrect",-      "center_mm": [-        4.65,-        -5.715-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    }-  ]-}+  "seating_z_mm": -0.0+ },+ "sources": {+  "glb": "sn74lvc374adwr-etched.glb",+  "glb_sha256": "8dcbf479de14e192f5737431c06e795e3e8a25c7ffcbe43d6eccfc3db3bc1508",+  "footprint": "sn74lvc374adwr.kicad_mod",+  "footprint_sha256": "9783bc19f518a72442ddbfe6289e767a42c3d23358b65c3447b6a36bdd0e7dcf",+  "pins": "page.json component.pins",+  "pins_sha256": "045546e90334dddb23668cb225e238e395fe454774867b24f18cb4741bae2988"+ },+ "generator": "factory/hero_glb.py",+ "labels": [+  {+   "pad": "1",+   "text": "OE",+   "x": -5.825,+   "y": -5.715,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "2",+   "text": "1Q",+   "x": -5.825,+   "y": -4.445,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "3",+   "text": "1D",+   "x": -5.825,+   "y": -3.175,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "4",+   "text": "2D",+   "x": -5.825,+   "y": -1.905,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "5",+   "text": "2Q",+   "x": -5.825,+   "y": -0.635,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "6",+   "text": "3Q",+   "x": -5.825,+   "y": 0.635,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "7",+   "text": "3D",+   "x": -5.825,+   "y": 1.905,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "8",+   "text": "4D",+   "x": -5.825,+   "y": 3.175,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "9",+   "text": "4Q",+   "x": -5.825,+   "y": 4.445,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "10",+   "text": "GND",+   "x": -5.825,+   "y": 5.715,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "11",+   "text": "CLK",+   "x": 5.825,+   "y": 5.715,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "12",+   "text": "5Q",+   "x": 5.825,+   "y": 4.445,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "13",+   "text": "5D",+   "x": 5.825,+   "y": 3.175,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "14",+   "text": "6D",+   "x": 5.825,+   "y": 1.905,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "15",+   "text": "6Q",+   "x": 5.825,+   "y": 0.635,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "16",+   "text": "7Q",+   "x": 5.825,+   "y": -0.635,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "17",+   "text": "7D",+   "x": 5.825,+   "y": -1.905,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "18",+   "text": "8D",+   "x": 5.825,+   "y": -3.175,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "19",+   "text": "8Q",+   "x": 5.825,+   "y": -4.445,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "20",+   "text": "VCC",+   "x": 5.825,+   "y": -5.715,+   "align": "left",+   "vertical": false,+   "h": 0.6+  }+ ],+ "pads": [+  {+   "number": "1",+   "shape": "roundrect",+   "center_mm": [+    -4.65,+    -5.715+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "2",+   "shape": "roundrect",+   "center_mm": [+    -4.65,+    -4.445+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "3",+   "shape": "roundrect",+   "center_mm": [+    -4.65,+    -3.175+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "4",+   "shape": "roundrect",+   "center_mm": [+    -4.65,+    -1.905+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "5",+   "shape": "roundrect",+   "center_mm": [+    -4.65,+    -0.635+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "6",+   "shape": "roundrect",+   "center_mm": [+    -4.65,+    0.635+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "7",+   "shape": "roundrect",+   "center_mm": [+    -4.65,+    1.905+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "8",+   "shape": "roundrect",+   "center_mm": [+    -4.65,+    3.175+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "9",+   "shape": "roundrect",+   "center_mm": [+    -4.65,+    4.445+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "10",+   "shape": "roundrect",+   "center_mm": [+    -4.65,+    5.715+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "11",+   "shape": "roundrect",+   "center_mm": [+    4.65,+    5.715+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "12",+   "shape": "roundrect",+   "center_mm": [+    4.65,+    4.445+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "13",+   "shape": "roundrect",+   "center_mm": [+    4.65,+    3.175+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "14",+   "shape": "roundrect",+   "center_mm": [+    4.65,+    1.905+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "15",+   "shape": "roundrect",+   "center_mm": [+    4.65,+    0.635+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "16",+   "shape": "roundrect",+   "center_mm": [+    4.65,+    -0.635+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "17",+   "shape": "roundrect",+   "center_mm": [+    4.65,+    -1.905+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "18",+   "shape": "roundrect",+   "center_mm": [+    4.65,+    -3.175+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "19",+   "shape": "roundrect",+   "center_mm": [+    4.65,+    -4.445+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "20",+   "shape": "roundrect",+   "center_mm": [+    4.65,+    -5.715+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  }+ ]+}\ No newline at end of file
sn74lvc374adwr.kicad_sym+8−8
@@ -12,7 +12,7 @@       (name "OE" (effects (font (size 1.27 1.27))))       (number "1" (effects (font (size 1.27 1.27))))     )-    (pin tri_state line (at -17.78 7.62 0) (length 5.08)+    (pin output line (at -17.78 7.62 0) (length 5.08)       (name "1Q" (effects (font (size 1.27 1.27))))       (number "2" (effects (font (size 1.27 1.27))))     )@@ -24,11 +24,11 @@       (name "2D" (effects (font (size 1.27 1.27))))       (number "4" (effects (font (size 1.27 1.27))))     )-    (pin tri_state line (at -17.78 0.00 0) (length 5.08)+    (pin output line (at -17.78 0.00 0) (length 5.08)       (name "2Q" (effects (font (size 1.27 1.27))))       (number "5" (effects (font (size 1.27 1.27))))     )-    (pin tri_state line (at -17.78 -2.54 0) (length 5.08)+    (pin output line (at -17.78 -2.54 0) (length 5.08)       (name "3Q" (effects (font (size 1.27 1.27))))       (number "6" (effects (font (size 1.27 1.27))))     )@@ -40,7 +40,7 @@       (name "4D" (effects (font (size 1.27 1.27))))       (number "8" (effects (font (size 1.27 1.27))))     )-    (pin tri_state line (at -17.78 -10.16 0) (length 5.08)+    (pin output line (at -17.78 -10.16 0) (length 5.08)       (name "4Q" (effects (font (size 1.27 1.27))))       (number "9" (effects (font (size 1.27 1.27))))     )@@ -52,7 +52,7 @@       (name "VCC" (effects (font (size 1.27 1.27))))       (number "20" (effects (font (size 1.27 1.27))))     )-    (pin tri_state line (at 17.78 7.62 180) (length 5.08)+    (pin output line (at 17.78 7.62 180) (length 5.08)       (name "8Q" (effects (font (size 1.27 1.27))))       (number "19" (effects (font (size 1.27 1.27))))     )@@ -64,11 +64,11 @@       (name "7D" (effects (font (size 1.27 1.27))))       (number "17" (effects (font (size 1.27 1.27))))     )-    (pin tri_state line (at 17.78 0.00 180) (length 5.08)+    (pin output line (at 17.78 0.00 180) (length 5.08)       (name "7Q" (effects (font (size 1.27 1.27))))       (number "16" (effects (font (size 1.27 1.27))))     )-    (pin tri_state line (at 17.78 -2.54 180) (length 5.08)+    (pin output line (at 17.78 -2.54 180) (length 5.08)       (name "6Q" (effects (font (size 1.27 1.27))))       (number "15" (effects (font (size 1.27 1.27))))     )@@ -80,7 +80,7 @@       (name "5D" (effects (font (size 1.27 1.27))))       (number "13" (effects (font (size 1.27 1.27))))     )-    (pin tri_state line (at 17.78 -10.16 180) (length 5.08)+    (pin output line (at 17.78 -10.16 180) (length 5.08)       (name "5Q" (effects (font (size 1.27 1.27))))       (number "12" (effects (font (size 1.27 1.27))))     )
sn74lvc374adwr.lbr+8−8
@@ -106,24 +106,24 @@   <text x="0.0000" y="15.2400" size="1.27" layer="95" align="center">&gt;NAME</text>   <text x="0.0000" y="-17.7800" size="1.27" layer="96" align="center">&gt;VALUE</text>   <pin name="OE" x="-17.78" y="10.16" length="middle" direction="in"/>-  <pin name="1Q" x="-17.78" y="7.62" length="middle" direction="hiz"/>+  <pin name="1Q" x="-17.78" y="7.62" length="middle" direction="out"/>   <pin name="1D" x="-17.78" y="5.08" length="middle" direction="in"/>   <pin name="2D" x="-17.78" y="2.54" length="middle" direction="in"/>-  <pin name="2Q" x="-17.78" y="0" length="middle" direction="hiz"/>-  <pin name="3Q" x="-17.78" y="-2.54" length="middle" direction="hiz"/>+  <pin name="2Q" x="-17.78" y="0" length="middle" direction="out"/>+  <pin name="3Q" x="-17.78" y="-2.54" length="middle" direction="out"/>   <pin name="3D" x="-17.78" y="-5.08" length="middle" direction="in"/>   <pin name="4D" x="-17.78" y="-7.62" length="middle" direction="in"/>-  <pin name="4Q" x="-17.78" y="-10.16" length="middle" direction="hiz"/>+  <pin name="4Q" x="-17.78" y="-10.16" length="middle" direction="out"/>   <pin name="GND" x="-17.78" y="-12.7" length="middle" direction="pwr"/>   <pin name="VCC" x="17.78" y="10.16" length="middle" direction="pwr" rot="R180"/>-  <pin name="8Q" x="17.78" y="7.62" length="middle" direction="hiz" rot="R180"/>+  <pin name="8Q" x="17.78" y="7.62" length="middle" direction="out" rot="R180"/>   <pin name="8D" x="17.78" y="5.08" length="middle" direction="in" rot="R180"/>   <pin name="7D" x="17.78" y="2.54" length="middle" direction="in" rot="R180"/>-  <pin name="7Q" x="17.78" y="0" length="middle" direction="hiz" rot="R180"/>-  <pin name="6Q" x="17.78" y="-2.54" length="middle" direction="hiz" rot="R180"/>+  <pin name="7Q" x="17.78" y="0" length="middle" direction="out" rot="R180"/>+  <pin name="6Q" x="17.78" y="-2.54" length="middle" direction="out" rot="R180"/>   <pin name="6D" x="17.78" y="-5.08" length="middle" direction="in" rot="R180"/>   <pin name="5D" x="17.78" y="-7.62" length="middle" direction="in" rot="R180"/>-  <pin name="5Q" x="17.78" y="-10.16" length="middle" direction="hiz" rot="R180"/>+  <pin name="5Q" x="17.78" y="-10.16" length="middle" direction="out" rot="R180"/>   <pin name="CLK" x="17.78" y="-12.7" length="middle" direction="in" rot="R180"/> </symbol> </symbols>