component
SN74LVC245ADBR
Public Made by Adomby adom
Texas Instruments Buffers, Drivers, Receivers, Transceivers, SSOP-20. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by adom_assets · KiCad file format 20240108
SN74LVC245ADBR
Texas Instruments · Buffers, Drivers, Receivers, Transceivers · SSOP-20
SN74LVC245ADBR from Texas Instruments, in a SSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table and the footprint is an Adom_Gen land derived from the manufacturer drawing; the 3D model is generated to fit it.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DIR | input | Direction control: when high, the signal propagates from A to B; when low, the signal propagates from B to A. |
| 2 | A1 | bidirectional | Transceiver I/O pin on the A bus; it drives the B bus when DIR is high and receives from the B bus when DIR is low, and is isolated when OE is high. |
| 3 | A2 | bidirectional | Transceiver I/O pin on the A bus; it drives the B bus when DIR is high and receives from the B bus when DIR is low, and is isolated when OE is high. |
| 4 | A3 | bidirectional | Transceiver I/O pin on the A bus; it drives the B bus when DIR is high and receives from the B bus when DIR is low, and is isolated when OE is high. |
| 5 | A4 | bidirectional | Transceiver I/O pin on the A bus; it drives the B bus when DIR is high and receives from the B bus when DIR is low, and is isolated when OE is high. |
| 6 | A5 | bidirectional | Transceiver I/O pin on the A bus; it drives the B bus when DIR is high and receives from the B bus when DIR is low, and is isolated when OE is high. |
| 7 | A6 | bidirectional | Transceiver I/O pin on the A bus; it drives the B bus when DIR is high and receives from the B bus when DIR is low, and is isolated when OE is high. |
| 8 | A7 | bidirectional | Transceiver I/O pin on the A bus; it drives the B bus when DIR is high and receives from the B bus when DIR is low, and is isolated when OE is high. |
| 9 | A8 | bidirectional | Transceiver I/O pin on the A bus; it drives the B bus when DIR is high and receives from the B bus when DIR is low, and is isolated when OE is high. |
| 10 | GND | power_in | Ground reference pin for the device. |
| 11 | B8 | bidirectional | Transceiver I/O pin on the B bus; it drives the A bus when DIR is low and receives from the A bus when DIR is high, and is isolated when OE is high. |
| 12 | B7 | bidirectional | Transceiver I/O pin on the B bus; it drives the A bus when DIR is low and receives from the A bus when DIR is high, and is isolated when OE is high. |
| 13 | B6 | bidirectional | Transceiver I/O pin on the B bus; it drives the A bus when DIR is low and receives from the A bus when DIR is high, and is isolated when OE is high. |
| 14 | B5 | bidirectional | Transceiver I/O pin on the B bus; it drives the A bus when DIR is low and receives from the A bus when DIR is high, and is isolated when OE is high. |
| 15 | B4 | bidirectional | Transceiver I/O pin on the B bus; it drives the A bus when DIR is low and receives from the A bus when DIR is high, and is isolated when OE is high. |
| 16 | B3 | bidirectional | Transceiver I/O pin on the B bus; it drives the A bus when DIR is low and receives from the A bus when DIR is high, and is isolated when OE is high. |
| 17 | B2 | bidirectional | Transceiver I/O pin on the B bus; it drives the A bus when DIR is low and receives from the A bus when DIR is high, and is isolated when OE is high. |
| 18 | B1 | bidirectional | Transceiver I/O pin on the B bus; it drives the A bus when DIR is low and receives from the A bus when DIR is high, and is isolated when OE is high. |
| 19 | OE | input | Output enable: when high, the device is isolated (the buses are disconnected); when low, transfer in the direction set by DIR is enabled. |
| 20 | VCC | power_in | Power supply pin; the device operates from 1.65 V to 3.6 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SSOP-20 |
| Category | Logic |
| Pins | 20 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VCC Supply voltage range | VCC | -0.5 | 6.5 | V | 4 | ||
| Input voltage range | VI | -0.5 | 6.5 | V | 4 | ||
| Voltage range applied to any output in the high-impedance or power-off state | VO | -0.5 | 6.5 | V | 4 | ||
| Voltage range applied to any output in the high or low state | VO | -0.5 | V | Max printed as VCC + 0.5 V | 4 | ||
| Input clamp current | IIK | -50 | mA | VI < 0 | 4 | ||
| Output clamp current | IOK | -50 | mA | VO < 0 | 4 | ||
| Continuous output current | IO | -50 | 50 | mA | 4 | ||
| Continuous current through VCC or GND | -100 | 100 | mA | 4 | |||
| Storage temperature range | Tstg | -65 | 150 | °C | 4 | ||
| Supply voltage range (operating) | VCC | 1.65 | 3.6 | V | Operating, TA -40°C to 125°C | 5 | |
| Supply voltage range (data retention only) | VCC | 1.5 | V | Data retention only | 5 | ||
| High-level input voltage | VIH | 1.7 | V | VCC = 2.3 V to 2.7 V | 5 | ||
| High-level input voltage | VIH | 2 | V | VCC = 2.7 V to 3.6 V | 5 | ||
| Low-level input voltage | VIL | 0.7 | V | VCC = 2.3 V to 2.7 V | 5 | ||
| Low-level input voltage | VIL | 0.8 | V | VCC = 2.7 V to 3.6 V | 5 | ||
| Input voltage | VI | 0 | 5.5 | V | 5 | ||
| Output voltage | VO | 0 | V | Max printed as VCC | 5 | ||
| High-level output current | IOH | -4 | mA | VCC = 1.65 V | 5 | ||
| High-level output current | IOH | -8 | mA | VCC = 2.3 V | 5 | ||
| High-level output current | IOH | -12 | mA | VCC = 2.7 V | 5 | ||
| High-level output current | IOH | -24 | mA | VCC = 3 V | 5 | ||
| Low-level output current | IOL | 4 | mA | VCC = 1.65 V | 5 | ||
| Low-level output current | IOL | 8 | mA | VCC = 2.3 V | 5 | ||
| Low-level output current | IOL | 12 | mA | VCC = 2.7 V | 5 | ||
| Low-level output current | IOL | 24 | mA | VCC = 3 V | 5 | ||
| Input transition rise or fall rate | Δt/Δv | 10 | ns/V | 5 | |||
| Junction-to-ambient thermal resistance (DB package) | RθJA | 124.1 | °C/W | DB package | 5 | ||
| Junction-to-case (top) thermal resistance (DB package) | RθJC(top) | 68.1 | °C/W | DB package | 5 | ||
| Junction-to-board thermal resistance (DB package) | RθJB | 61.7 | °C/W | DB package | 5 | ||
| Junction-to-top characterization parameter (DB package) | ψJT | 28.5 | °C/W | DB package | 5 | ||
| Junction-to-board characterization parameter (DB package) | ψJB | 61.2 | °C/W | DB package | 5 | ||
| High-level output voltage | VOH | 1.1 | V | IOH = -4 mA, VCC = 1.65 V, TA -40°C to 125°C | 6 | ||
| High-level output voltage | VOH | 1.6 | V | IOH = -8 mA, VCC = 2.3 V, TA -40°C to 125°C | 6 | ||
| High-level output voltage | VOH | 2.1 | V | IOH = -12 mA, VCC = 2.7 V, TA -40°C to 125°C | 6 | ||
| High-level output voltage | VOH | 2.3 | V | IOH = -24 mA, VCC = 3 V, TA -40°C to 125°C | 6 | ||
| Low-level output voltage | VOL | 0.2 | V | IOL = 100 μA, VCC 1.65 V to 3.6 V, TA -40°C to 125°C | 6 | ||
| Low-level output voltage | VOL | 0.6 | V | IOL = 4 mA, VCC = 1.65 V, TA -40°C to 125°C | 6 | ||
| Low-level output voltage | VOL | 0.75 | V | IOL = 8 mA, VCC = 2.3 V, TA -40°C to 125°C | 6 | ||
| Control inputs input current | II | -10 | 10 | μA | VI = 0 to 5.5 V, VCC = 3.6 V, TA -40°C to 125°C | 6 | |
| Power-off leakage current | Ioff | -20 | 20 | μA | VI or VO = 5.5 V, VCC = 0, TA -40°C to 125°C | 6 | |
| Off-state output current | IOZ | -20 | 20 | μA | VO = 0 to 5.5 V, VCC = 3.6 V, TA -40°C to 125°C | 6 | |
| Quiescent supply current | ICC | 30 | μA | VI = VCC or GND, IO = 0, VCC = 3.6 V, TA -40°C to 125°C | 6 | ||
| Additional quiescent supply current per input | ΔICC | 5000 | μA | 3.6 V ≤ VI ≤ 5.5 V, one input at VCC, 0.6 V, others at VCC or GND, VCC 2.7 V to 3.6 V, TA -40°C to 125°C | 6 | ||
| Propagation delay A or B to B or A | tpd | 1 | 6 | 13.7 | ns | VCC = 1.8 V ±0.15 V, TA -40°C to 125°C (typ at 25°C) | 6 |
| Propagation delay A or B to B or A | tpd | 1 | 3.9 | 9.1 | ns | VCC = 2.5 V ±0.2 V, TA -40°C to 125°C (typ at 25°C) | 6 |
| Propagation delay A or B to B or A | tpd | 1 | 4.2 | 8.3 | ns | VCC = 2.7 V, TA -40°C to 125°C (typ at 25°C) | 6 |
| Propagation delay A or B to B or A | tpd | 1.5 | 3.8 | 7.3 | ns | VCC = 3.3 V ±0.3 V, TA -40°C to 125°C (typ at 25°C) | 6 |
| Output enable time OE to A or B | ten | 1 | 7 | 16.8 | ns | VCC = 1.8 V ±0.15 V, TA -40°C to 125°C (typ at 25°C) | 6 |
| Output enable time OE to A or B | ten | 1 | 4.5 | 12 | ns | VCC = 2.5 V ±0.2 V, TA -40°C to 125°C (typ at 25°C) | 6 |
| Output enable time OE to A or B | ten | 1 | 5.4 | 11 | ns | VCC = 2.7 V, TA -40°C to 125°C (typ at 25°C) | 6 |
| Output enable time OE to A or B | ten | 1.5 | 4.4 | 10 | ns | VCC = 3.3 V ±0.3 V, TA -40°C to 125°C (typ at 25°C) | 6 |
| Output disable time OE to A or B | tdis | 1 | 7.8 | 18 | ns | VCC = 1.8 V ±0.15 V, TA -40°C to 125°C (typ at 25°C) | 6 |
| Output disable time OE to A or B | tdis | 1 | 4 | 10.5 | ns | VCC = 2.5 V ±0.2 V, TA -40°C to 125°C (typ at 25°C) | 6 |
| Output disable time OE to A or B | tdis | 1 | 4.4 | 9.5 | ns | VCC = 2.7 V, TA -40°C to 125°C (typ at 25°C) | 6 |
| Output disable time OE to A or B | tdis | 1.7 | 4.1 | 8.5 | ns | VCC = 3.3 V ±0.3 V, TA -40°C to 125°C (typ at 25°C) | 6 |
| Skew between outputs (same direction) | tsk(o) | 1.5 | ns | VCC = 3.3 V ±0.3 V | 6 |
CAD (Adom-generated)
- Symbol:
SN74LVC245ADBR - Footprint:
Adom_Gen:Texas_Instruments_SN74_a51b17 - 3D model: generated to fit the land (STEP)
- 3D model files:
sn74lvc245adbr-etched.step/sn74lvc245adbr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn74lvc245adbr.step/sn74lvc245adbr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (32 pp, sha256
ad3e705aef834214, retrieved 2026-11-06, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing. 3D model generated to fit that land.