main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers sn74lvc1g99qdcurq1: viewers · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
sn74lvc1g99qdcurq1-etched.glb Publish 0.1.0 · Ray
sn74lvc1g99qdcurq1-etched.step sn74lvc1g99qdcurq1: factory component page (tier=mfr) · Ray
sn74lvc1g99qdcurq1-hero.glb sn74lvc1g99qdcurq1: hero GLB from the etched model (keeps the MPN mark) · Ray
sn74lvc1g99qdcurq1-hero.overlay.json Publish 0.1.0 · Ray
sn74lvc1g99qdcurq1.glb Publish 0.1.0 · Ray
sn74lvc1g99qdcurq1.kicad_mod Publish 0.1.0 · Ray
sn74lvc1g99qdcurq1.kicad_sym Publish 0.1.0 · Ray
sn74lvc1g99qdcurq1.lbr Publish 0.1.0 · Ray
sn74lvc1g99qdcurq1.step Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 8 pins · Ray

SN74LVC1G99QDCURQ1

Texas Instruments · Gates · VSSOP-8

SN74LVC1G99QDCURQ1 from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OE input Output-enable input; the output is high-impedance when OE is high and follows the 4-bit input pattern when OE is low, and OE should be tied to VCC through a pullup resistor to ensure the high-impedance state during power up or power down.
2 A input Configurable logic input A, accepts voltages to 5.5 V and must be tied to VCC or GND when unused.
3 B input Configurable logic input B, accepts voltages to 5.5 V and must be tied to VCC or GND when unused.
4 GND power_in Ground pin.
5 C input Configurable logic input C, accepts voltages to 5.5 V and must be tied to VCC or GND when unused.
6 D input Configurable logic input D, accepts voltages to 5.5 V and must be tied to VCC or GND when unused.
7 Y tri_state 3-state output with ±24-mA drive at 3.3 V, disabled (high-impedance) when OE is high.
8 VCC power_in Supply voltage, 1.65 V to 5.5 V operating (absolute maximum 6.5 V).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VSSOP-8
Category Logic ICs
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage, operating VCC 1.65 5.5 V Operating 8
Supply voltage, data retention only VCC 1.5 V Data retention only 8
Input voltage VI 0 5.5 V 8
Output voltage VO 0 V max VCC 8
High-level output current IOH -4 mA VCC = 1.65 V 8
High-level output current IOH -8 mA VCC = 2.3 V 8
High-level output current IOH -24 mA VCC = 3 V 8
High-level output current IOH -32 mA VCC = 4.5 V 8
Low-level output current IOL 4 mA VCC = 1.65 V 8
Low-level output current IOL 8 mA VCC = 2.3 V 8
Low-level output current IOL 24 mA VCC = 3 V 8
Low-level output current IOL 32 mA VCC = 4.5 V 8
Input transition rise or fall rate Δt/Δv 20 ns/V VCC = 1.8 V ± 0.15 V, 2.5 V ± 0.2 V 8
Input transition rise or fall rate Δt/Δv 10 ns/V VCC = 3.3 V ± 0.3 V 8
Input transition rise or fall rate Δt/Δv 5 ns/V VCC = 5 V ± 0.5 V 8
Operating free-air temperature range TA -40 125 °C Ordering information, DCU package 1
Supply voltage range VCC -0.5 6.5 V 8
Input voltage range VI -0.5 6.5 V 8
Voltage range applied to any output in the high-impedance or power-off state VO -0.5 6.5 V 8
Voltage range applied to any output in the high or low state VO -0.5 V max VCC + 0.5 V 8
Input clamp current IIK -50 mA VI < 0 8
Output clamp current IOK -50 mA VO < 0 8
Continuous output current IO -50 50 mA 8
Continuous current through VCC or GND -100 100 mA 8
Storage temperature range Tstg -65 150 °C 8
Package thermal impedance θJA 227 °C/W DCU package 8
Positive-going input threshold voltage VT+ 0.79 1.26 V VCC = 1.65 V 9
Positive-going input threshold voltage VT+ 1.11 1.66 V VCC = 2.3 V 9
Positive-going input threshold voltage VT+ 1.5 1.97 V VCC = 3 V 9
Positive-going input threshold voltage VT+ 2.16 2.84 V VCC = 4.5 V 9
Positive-going input threshold voltage VT+ 2.61 3.43 V VCC = 5.5 V 9
Negative-going input threshold voltage VT- 0.39 0.72 V VCC = 1.65 V 9
Negative-going input threshold voltage VT- 0.58 0.97 V VCC = 2.3 V 9
Negative-going input threshold voltage VT- 0.84 1.24 V VCC = 3 V 9
Negative-going input threshold voltage VT- 1.41 1.89 V VCC = 4.5 V 9
Negative-going input threshold voltage VT- 1.87 2.39 V VCC = 5.5 V 9
Hysteresis (VT+ - VT-) ΔVT 0.37 0.72 V VCC = 1.65 V 9
Hysteresis (VT+ - VT-) ΔVT 0.48 0.87 V VCC = 2.3 V 9
Hysteresis (VT+ - VT-) ΔVT 0.56 0.97 V VCC = 3 V 9
Hysteresis (VT+ - VT-) ΔVT 0.71 1.14 V VCC = 4.5 V 9
Hysteresis (VT+ - VT-) ΔVT 0.71 1.21 V VCC = 5.5 V 9
High-level output voltage VOH 1.2 V IOH = -4 mA, VCC = 1.65 V 9
High-level output voltage VOH 1.9 V IOH = -8 mA, VCC = 2.3 V 9
High-level output voltage VOH 2.4 V IOH = -16 mA, VCC = 3 V 9
High-level output voltage VOH 2.3 V IOH = -24 mA, VCC = 3 V 9
High-level output voltage VOH 3.8 V IOH = -32 mA, VCC = 4.5 V 9
Low-level output voltage VOL 0.1 V IOL = 100 μA, VCC 1.65 V to 5.5 V 9
Low-level output voltage VOL 0.45 V IOL = 4 mA, VCC = 1.65 V 9
Low-level output voltage VOL 0.35 V IOL = 8 mA, VCC = 2.3 V 9
Low-level output voltage VOL 0.55 V IOL = 24 mA, VCC = 3 V 9
Low-level output voltage VOL 0.6 V IOL = 32 mA, VCC = 4.5 V 9
Input current II -5 5 μA VI = 5.5 V or GND, VCC 0 V to 5.5 V 9
Partial-power-down output current Ioff -10 10 μA VI or VO = 5.5 V, VCC = 0 V 9
High-impedance output current IOZ -10 10 μA VO = VCC or GND, VCC 1.65 V to 5.5 V 9
Quiescent supply current ICC 15 μA VI = 5.5 V or GND, IO = 0, VCC 1.65 V to 5.5 V 9
Additional quiescent supply current per input ΔICC 500 μA One input at VCC - 0.6 V, others at VCC or GND, VCC 3 V to 5.5 V 9

CAD (KiCad official)

  • Symbol: SN74LVC1G99QDCURQ1
  • Footprint: Package_SO:VSSOP-8_2.3x2mm_P0.5mm
  • 3D model: VSSOP-8 (KiCad packages3D, STEP)
  • 3D model files: sn74lvc1g99qdcurq1-etched.step / sn74lvc1g99qdcurq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sn74lvc1g99qdcurq1.step / sn74lvc1g99qdcurq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (19 pp, sha256 cc37365052d0ef52, retrieved 2026-11-06, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF