Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

SN74LVC1G125DRLR

Texas Instruments · Buffers, Drivers, Receivers, Transceivers · SOT-5X3-5

SN74LVC1G125DRLR from Texas Instruments, in a SOT-5X3-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table and the footprint is an Adom_Gen land derived from the manufacturer drawing; the 3D model is generated to fit it.

Pinout

Pin Name Type Function
1 OE input Output-enable input: when OE is high the output is disabled (high impedance), and when low the A-to-Y path is active; tie OE to VCC through a pullup resistor so the output stays high-impedance during power up or power down.
2 A input Data input passed to output Y when OE is low; standard CMOS input rated up to 5.5 V and must not be left floating.
3 GND power_in Ground reference pin for the device.
4 Y tri_state 3-state buffer output that drives A (true data) when OE is low and goes high impedance when OE is high.
5 VCC power_in Positive supply pin; operating supply range is 1.65 V to 5.5 V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-5X3-5
Category Logic
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage, operating VCC 1.65 5.5 V Operating 5
Supply voltage, data retention only VCC 1.5 V Data retention only 5
High-level input voltage VIH 1.7 V VCC = 2.3V to 2.7V 5
High-level input voltage VIH 2 V VCC = 3V to 3.6V 5
Low-level input voltage VIL 0.7 V VCC = 2.3V to 2.7V 5
Low-level input voltage VIL 0.8 V VCC = 3V to 3.6V 5
Input voltage VI 0 5.5 V 5
Output voltage VO 0 V Max printed as VCC 5
Input transition rise or fall rate Δt/Δv 20 ns/V VCC = 1.8V ± 0.15V, 2.5V ± 0.2V 5
Input transition rise or fall rate Δt/Δv 10 ns/V VCC = 3.3V ± 0.3V 5
Input transition rise or fall rate Δt/Δv 5 ns/V VCC = 5V ± 0.5V 5
Operating free-air temperature TA -40 125 °C 5
Supply voltage range VCC -0.5 6.5 V 4
Input voltage range VI -0.5 6.5 V 4
Voltage range applied to any output in the high-impedance or power-off state VO -0.5 6.5 V 4
Voltage range applied to any output in the high or low state VO -0.5 V Max printed as VCC + 0.5 4
Input clamp current IIK -50 mA VI < 0 4
Output clamp current IOK -50 mA VO < 0 4
Continuous output current IO -50 50 mA 4
Continuous current through VCC or GND -100 100 mA 4
Storage temperature Tstg -65 150 °C 4
High-level output voltage VOH 1.2 V IOH = -4mA; VCC = 1.65V; -40°C to 125°C 6
High-level output voltage VOH 1.4 V IOH = -8mA; VCC = 1.8V 6
High-level output voltage VOH 1.9 V IOH = -8mA; VCC = 2.3V 6
High-level output voltage VOH 2.4 V IOH = -16mA; VCC = 3V 6
High-level output voltage VOH 2.3 V IOH = -24mA; VCC = 3V 6
High-level output voltage VOH 3.8 V IOH = -32mA; VCC = 4.5V 6
Low-level output voltage VOL 0.1 V IOL = 100μA; VCC = 1.65V to 5.5V 6
Low-level output voltage VOL 0.45 V IOL = 4mA; VCC = 1.65V 6
Low-level output voltage VOL 0.3 V IOL = 8mA; VCC = 2.3V 6
Low-level output voltage VOL 0.4 V IOL = 16mA; VCC = 3V 6
Low-level output voltage VOL 0.55 V IOL = 24mA; VCC = 3V 6
Input current II -5 5 μA A or OE inputs; VI = 5.5V or GND; VCC = 0 to 5.5V 6
Partial power down leakage current Ioff -10 10 μA VI or VO = 5.5V; VCC = 0 6
High-impedance output leakage current IOZ 10 μA VO = 0 to 5.5V; VCC = 3.6V 6
Quiescent supply current ICC 10 μA VI = 5.5V or GND, IO = 0; VCC = 1.65V to 5.5V 6
Additional quiescent supply current per input ΔICC 500 μA One input at VCC, 0.6V, other inputs at VCC or GND; VCC = 3V to 5.5V 6
Propagation delay time, A to Y tpd 2.8 9.3 ns CL = 30pF or 50pF; VCC = 1.8V ± 0.15V; -40°C to 125°C 7
Propagation delay time, A to Y tpd 1.2 5.8 ns CL = 30pF or 50pF; VCC = 2.5V ± 0.2V; -40°C to 125°C 7
Propagation delay time, A to Y tpd 1 4.7 ns CL = 30pF or 50pF; VCC = 3.3V ± 0.3V; -40°C to 125°C 7
Propagation delay time, A to Y tpd 1 4.2 ns CL = 30pF or 50pF; VCC = 5V ± 0.5V; -40°C to 125°C 7
Enable time, OE to Y ten 3.3 10.4 ns CL = 30pF or 50pF; VCC = 1.8V ± 0.15V; -40°C to 125°C 7
Enable time, OE to Y ten 1.5 6.9 ns CL = 30pF or 50pF; VCC = 2.5V ± 0.2V; -40°C to 125°C 7
Enable time, OE to Y ten 1 5.6 ns CL = 30pF or 50pF; VCC = 3.3V ± 0.3V; -40°C to 125°C 7
Enable time, OE to Y ten 1 5.2 ns CL = 30pF or 50pF; VCC = 5V ± 0.5V; -40°C to 125°C 7
Disable time, OE to Y tdis 1.3 9.3 ns CL = 30pF or 50pF; VCC = 1.8V ± 0.15V; -40°C to 125°C 7
Disable time, OE to Y tdis 1 5.2 ns CL = 30pF or 50pF; VCC = 2.5V ± 0.2V; -40°C to 125°C 7
Disable time, OE to Y tdis 1 4.4 ns CL = 30pF or 50pF; VCC = 5V ± 0.5V; -40°C to 125°C 7
Input capacitance CI 4 pF VI = VCC or GND; VCC = 3.3V 6
Junction-to-ambient thermal resistance (DRL package) RθJA 364.1 °C/W DRL (SOT-5X3), 5 pins 5
Junction-to-case (top) thermal resistance (DRL package) RθJC(top) 280.6 °C/W DRL (SOT-5X3), 5 pins 5
Junction-to-board thermal resistance (DRL package) RθJB 261.5 °C/W DRL (SOT-5X3), 5 pins 5

CAD (Adom-generated)

  • Symbol: SN74LVC1G125DRLR
  • Footprint: Adom_Gen:Texas_Instruments_SN74_2c1a8c
  • 3D model: generated to fit the land (STEP)
  • 3D model files: sn74lvc1g125drlr-etched.step / sn74lvc1g125drlr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sn74lvc1g125drlr.step / sn74lvc1g125drlr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (52 pp, sha256 1098d46e4565695e, retrieved 2026-11-06, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing. 3D model generated to fit that land.

Datasheet PDF