component
SN74LVC1G04DB
Public Made by Adomby adom
lingxingic Inverters, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSN74LVC1G04DB
lingxingic · Inverters · SOT-23-5
SN74LVC1G04DB from lingxingic, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | n.c. | unconnected | Not connected; the datasheet lists this pin as not connected on the SOT23-5/SOT353/DFN4 package. |
| 2 | A | input | Data input of the inverting buffer; it accepts up to 5.5 V (5 V tolerant) regardless of VCC, with input voltage range 0 V to 5.5 V. |
| 3 | GND | power_in | Ground (0 V) reference for all voltages on the device. |
| 4 | Y | output | Inverted data output; in active mode it swings between 0 V and VCC, and the output drive is ±24 mA at VCC = 3.0 V. |
| 5 | VCC | power_in | Supply voltage, specified from 1.65 V to 5.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | lingxingic |
| Package | SOT-23-5 |
| Category | Logic |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| supply voltage | VCC | -0.5 | 6.5 | V | Voltages referenced to GND | 5 | |
| input clamping current | IIK | -50 | mA | VI < 0V | 5 | ||
| input voltage | VI | -0.5 | 6.5 | V | 5 | ||
| output clamping current | IOK | -50 | 50 | mA | VO > VCC or VO < 0V | 5 | |
| output voltage, active mode (max printed as VCC+0.5 V) | VO | -0.5 | V | Active mode | 5 | ||
| output voltage, power-down mode | VO | -0.5 | 6.5 | V | Power-down mode; VCC=0V | 5 | |
| output current | IO | -50 | 50 | mA | VO=0V to VCC | 5 | |
| supply current | ICC | 100 | mA | 5 | |||
| ground current | IGND | -100 | mA | 5 | |||
| storage temperature | Tstg | -65 | 150 | ℃ | 5 | ||
| total power dissipation | Ptot | 250 | mW | 5 | |||
| soldering temperature | TL | 260 | ℃ | 10s | 5 | ||
| supply voltage | VCC | 1.65 | 5.5 | V | 6 | ||
| input voltage | VI | 0 | 5.5 | V | 6 | ||
| output voltage, active mode (max printed as VCC) | VO | 0 | V | Active mode | 6 | ||
| output voltage, power-down mode | VO | 0 | 5.5 | V | Power-down mode; VCC=0V | 6 | |
| ambient temperature | Tamb | -40 | 125 | ℃ | 6 | ||
| HIGH-level input voltage | VIH | 1.7 | V | Tamb=-40℃ to +85℃; VCC=2.3V to 2.7V | 6 | ||
| HIGH-level input voltage | VIH | 2 | V | Tamb=-40℃ to +85℃; VCC=2.7V to 3.6V | 6 | ||
| LOW-level input voltage | VIL | 0.7 | V | Tamb=-40℃ to +85℃; VCC=2.3V to 2.7V | 6 | ||
| LOW-level input voltage | VIL | 0.8 | V | Tamb=-40℃ to +85℃; VCC=2.7V to 3.6V | 6 | ||
| HIGH-level output voltage | VOH | 1.2 | V | Tamb=-40℃ to +85℃; IO=-4mA; VCC=1.65V | 6 | ||
| HIGH-level output voltage | VOH | 1.9 | V | Tamb=-40℃ to +85℃; IO=-8mA; VCC=2.3V | 6 | ||
| HIGH-level output voltage | VOH | 2.2 | V | Tamb=-40℃ to +85℃; IO=-12mA; VCC=2.7V | 6 | ||
| HIGH-level output voltage | VOH | 2.3 | V | Tamb=-40℃ to +85℃; IO=-24mA; VCC=3.0V | 6 | ||
| HIGH-level output voltage | VOH | 3.8 | V | Tamb=-40℃ to +85℃; IO=-32mA; VCC=4.5V | 6 | ||
| LOW-level output voltage | VOL | 0.1 | V | Tamb=-40℃ to +85℃; IO=100uA; VCC=1.65V to 5.5V | 6 | ||
| LOW-level output voltage | VOL | 0.45 | V | Tamb=-40℃ to +85℃; IO=4mA; VCC=1.65V | 6 | ||
| LOW-level output voltage | VOL | 0.3 | V | Tamb=-40℃ to +85℃; IO=8mA; VCC=2.3V | 6 | ||
| LOW-level output voltage | VOL | 0.4 | V | Tamb=-40℃ to +85℃; IO=12mA; VCC=2.7V | 6 | ||
| LOW-level output voltage | VOL | 0.55 | V | Tamb=-40℃ to +85℃; IO=24mA; VCC=3.0V | 6 | ||
| HIGH-level input voltage | VIH | 1.7 | V | Tamb=-40℃ to +125℃; VCC=2.3V to 2.7V | 7 | ||
| HIGH-level input voltage | VIH | 2 | V | Tamb=-40℃ to +125℃; VCC=2.7V to 3.6V | 7 | ||
| LOW-level input voltage | VIL | 0.7 | V | Tamb=-40℃ to +125℃; VCC=2.3V to 2.7V | 7 | ||
| LOW-level input voltage | VIL | 0.8 | V | Tamb=-40℃ to +125℃; VCC=2.7V to 3.6V | 7 | ||
| HIGH-level output voltage | VOH | 0.95 | V | Tamb=-40℃ to +125℃; IO=-4mA; VCC=1.65V | 7 | ||
| HIGH-level output voltage | VOH | 1.7 | V | Tamb=-40℃ to +125℃; IO=-8mA; VCC=2.3V | 7 | ||
| HIGH-level output voltage | VOH | 1.9 | V | Tamb=-40℃ to +125℃; IO=-12mA; VCC=2.7V | 7 | ||
| HIGH-level output voltage | VOH | 2 | V | Tamb=-40℃ to +125℃; IO=-24mA; VCC=3.0V | 7 | ||
| HIGH-level output voltage | VOH | 3.4 | V | Tamb=-40℃ to +125℃; IO=-32mA; VCC=4.5V | 7 | ||
| LOW-level output voltage | VOL | 0.1 | V | Tamb=-40℃ to +125℃; IO=100uA; VCC=1.65V to 5.5V | 7 | ||
| LOW-level output voltage | VOL | 0.7 | V | Tamb=-40℃ to +125℃; IO=4mA; VCC=1.65V | 7 | ||
| LOW-level output voltage | VOL | 0.45 | V | Tamb=-40℃ to +125℃; IO=8mA; VCC=2.3V | 7 | ||
| LOW-level output voltage | VOL | 0.6 | V | Tamb=-40℃ to +125℃; IO=12mA; VCC=2.7V | 7 | ||
| LOW-level output voltage | VOL | 0.8 | V | Tamb=-40℃ to +125℃; IO=24mA; VCC=3.0V | 7 | ||
| input leakage current | II | -1 | 1 | uA | Tamb=-40℃ to +125℃; VI=5.5V or GND; VCC=0V to 5.5V | 7 | |
| power-off leakage current | IOFF | -2 | 2 | uA | Tamb=-40℃ to +125℃; VI or VO=5.5V; VCC=0V | 7 | |
| supply current | ICC | 4 | uA | Tamb=-40℃ to +125℃; VI=5.5V or GND; IO=0A; VCC=1.65V to 5.5V | 7 | ||
| additional supply current | ΔICC | 500 | uA | Tamb=-40℃ to +125℃; per pin; VI=VCC-0.6V; IO=0A; VCC=2.3V to 5.5V | 7 | ||
| A to Y propagation delay (tPHL) | tPHL | 20.8 | ns | Tamb=-40℃ to +125℃; VCC=1.65V to 1.95V; see Figure 5 | 8 | ||
| A to Y propagation delay (tPHL) | tPHL | 17.8 | ns | Tamb=-40℃ to +125℃; VCC=2.3V to 2.7V; see Figure 5 | 8 | ||
| A to Y propagation delay (tPHL) | tPHL | 17 | ns | Tamb=-40℃ to +125℃; VCC=2.7V; see Figure 5 | 8 | ||
| A to Y propagation delay (tPHL) | tPHL | 16.3 | ns | Tamb=-40℃ to +125℃; VCC=3.0V to 3.6V; see Figure 5 | 8 | ||
| A to Y propagation delay (tPHL) | tPHL | 15.5 | ns | Tamb=-40℃ to +125℃; VCC=4.5V to 5.5V; see Figure 5 | 8 | ||
| A to Y propagation delay (tPLH) | tPLH | 23 | ns | Tamb=-40℃ to +125℃; VCC=1.65V to 1.95V; see Figure 5 | 8 | ||
| A to Y propagation delay (tPLH) | tPLH | 17 | ns | Tamb=-40℃ to +125℃; VCC=2.3V to 2.7V; see Figure 5 | 8 | ||
| A to Y propagation delay (tPLH) | tPLH | 16.3 | ns | Tamb=-40℃ to +125℃; VCC=2.7V; see Figure 5 | 8 | ||
| A to Y propagation delay (tPLH) | tPLH | 14.8 | ns | Tamb=-40℃ to +125℃; VCC=3.0V to 3.6V; see Figure 5 | 8 | ||
| A to Y propagation delay (tPLH) | tPLH | 13.3 | ns | Tamb=-40℃ to +125℃; VCC=4.5V to 5.5V; see Figure 5 | 8 |
CAD (KiCad official)
- Symbol:
SN74LVC1G04DB - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
sn74lvc1g04db-etched.step/sn74lvc1g04db-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn74lvc1g04db.step/sn74lvc1g04db.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: lingxingic datasheet (14 pp, sha256
ffa255223a895068, retrieved 2026-10-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).