component
SN74LVC138AQDRG4Q1
Public Made by Adomby adom
Texas Instruments Signal Switches, Multiplexers, Decoders, SOIC-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownSN74LVC138AQDRG4Q1
Texas Instruments · Signal Switches, Multiplexers, Decoders · SOIC-16
SN74LVC138AQDRG4Q1 from Texas Instruments, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | A | input | Binary-select address input (least significant bit); inputs accept voltages up to 5.5 V and can be driven from 3.3 V or 5 V devices. |
| 2 | B | input | Binary-select address input (middle bit); inputs accept voltages up to 5.5 V and can be driven from 3.3 V or 5 V devices. |
| 3 | C | input | Binary-select address input (most significant bit); inputs accept voltages up to 5.5 V and can be driven from 3.3 V or 5 V devices. |
| 4 | G2A | input | Active-low enable input; it must be low, together with G2B low and G1 high, for the decoder to select an output. |
| 5 | G2B | input | Active-low enable input; it must be low, together with G2A low and G1 high, for the decoder to select an output. |
| 6 | G1 | input | Active-high enable input; it must be high, with G2A and G2B low, for the decoder to select an output. |
| 7 | Y7 | output | Active-low decoder output that goes low only when A, B, C = H, H, H and all enables are active; otherwise it stays high. |
| 8 | GND | power_in | Ground reference for the device. |
| 9 | Y6 | output | Active-low decoder output that goes low only when A, B, C = L, H, H and all enables are active; otherwise it stays high. |
| 10 | Y5 | output | Active-low decoder output that goes low only when A, B, C = H, L, H and all enables are active; otherwise it stays high. |
| 11 | Y4 | output | Active-low decoder output that goes low only when A, B, C = L, L, H and all enables are active; otherwise it stays high. |
| 12 | Y3 | output | Active-low decoder output that goes low only when A, B, C = H, H, L and all enables are active; otherwise it stays high. |
| 13 | Y2 | output | Active-low decoder output that goes low only when A, B, C = L, H, L and all enables are active; otherwise it stays high. |
| 14 | Y1 | output | Active-low decoder output that goes low only when A, B, C = H, L, L and all enables are active; otherwise it stays high. |
| 15 | Y0 | output | Active-low decoder output that goes low only when A, B, C = L, L, L and all enables are active; otherwise it stays high. |
| 16 | VCC | power_in | Supply voltage; the recommended operating range is 2 V to 3.6 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-16 |
| Category | Logic |
| Pins | 16 |
CAD (KiCad official)
- Symbol:
SN74LVC138AQDRG4Q1 - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOIC-16 (KiCad packages3D, STEP)
- 3D model files:
sn74lvc138aqdrg4q1-etched.step/sn74lvc138aqdrg4q1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn74lvc138aqdrg4q1.step/sn74lvc138aqdrg4q1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (14 pp, sha256
475d05357e72f862, retrieved 2026-10-08, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).