main
Ray sn74lv573adgvr: CAD wording names the Adom_Gen land, not KiCad official 9545d8c

SN74LV573ADGVR

Texas Instruments · Latches · TVSOP-20-4.4mm

SN74LV573ADGVR from Texas Instruments, in a TVSOP-20-4.4mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table and the footprint is an Adom_Gen land derived from the manufacturer drawing; the 3D model is generated to fit it.

Pinout

Pin Name Type Function
1 OE input Active-low output enable; when high, all eight Q outputs go to high-impedance (Z), and OE does not affect the internal latch operation.
2 1D input Data input for latch 1; the Q output follows D while LE is high, and D must meet the 3.5 ns setup and 1.5 ns hold times relative to the falling edge of LE.
3 2D input Data input for latch 2; the Q output follows D while LE is high, and D must meet the 3.5 ns setup and 1.5 ns hold times relative to the falling edge of LE.
4 3D input Data input for latch 3; the Q output follows D while LE is high, and D must meet the 3.5 ns setup and 1.5 ns hold times relative to the falling edge of LE.
5 4D input Data input for latch 4; the Q output follows D while LE is high, and D must meet the 3.5 ns setup and 1.5 ns hold times relative to the falling edge of LE.
6 5D input Data input for latch 5; the Q output follows D while LE is high, and D must meet the 3.5 ns setup and 1.5 ns hold times relative to the falling edge of LE.
7 6D input Data input for latch 6; the Q output follows D while LE is high, and D must meet the 3.5 ns setup and 1.5 ns hold times relative to the falling edge of LE.
8 7D input Data input for latch 7; the Q output follows D while LE is high, and D must meet the 3.5 ns setup and 1.5 ns hold times relative to the falling edge of LE.
9 8D input Data input for latch 8; the Q output follows D while LE is high, and D must meet the 3.5 ns setup and 1.5 ns hold times relative to the falling edge of LE.
10 GND power_in Ground reference pin; the total current through GND or VCC must not exceed ±70 mA.
11 LE input Latch enable input; when high the Q outputs follow D, and when taken low the Q outputs latch the logic levels present at D.
12 8Q output 3-state latch output 8; with OE low it drives the latched value, sourcing up to −16 mA and sinking up to 16 mA at VCC 4.5 V to 5.5 V.
13 7Q output 3-state latch output 7; with OE low it drives the latched value, sourcing up to −16 mA and sinking up to 16 mA at VCC 4.5 V to 5.5 V.
14 6Q output 3-state latch output 6; with OE low it drives the latched value, sourcing up to −16 mA and sinking up to 16 mA at VCC 4.5 V to 5.5 V.
15 5Q output 3-state latch output 5; with OE low it drives the latched value, sourcing up to −16 mA and sinking up to 16 mA at VCC 4.5 V to 5.5 V.
16 4Q output 3-state latch output 4; with OE low it drives the latched value, sourcing up to −16 mA and sinking up to 16 mA at VCC 4.5 V to 5.5 V.
17 3Q output 3-state latch output 3; with OE low it drives the latched value, sourcing up to −16 mA and sinking up to 16 mA at VCC 4.5 V to 5.5 V.
18 2Q output 3-state latch output 2; with OE low it drives the latched value, sourcing up to −16 mA and sinking up to 16 mA at VCC 4.5 V to 5.5 V.
19 1Q output 3-state latch output 1; with OE low it drives the latched value, sourcing up to −16 mA and sinking up to 16 mA at VCC 4.5 V to 5.5 V.
20 VCC power_in Supply pin; the device operates from 2 V to 5.5 V and each VCC pin should be bypassed close to the pin with a 0.1-µF capacitor.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TVSOP-20-4.4mm
Category Logic
Pins 20

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC -0.5 7 V 4
Input voltage VI -0.5 7 V 4
Voltage applied to any output in high-impedance or power-off state VO -0.5 7 V 4
Output voltage applied in high or low state VO -0.5 V 4
Input clamp current IIK -20 20 mA VI < 0 4
Output clamp current IOK -50 mA VO < 0 4
Continuous output current IO -35 35 mA VO = 0 to VCC 4
Continuous current through VCC or GND -70 70 mA 4
Storage temperature Tstg -65 150 °C 4
Supply voltage VCC 2 5.5 V Over operating free-air temperature range 4
High-level input voltage VIH 1.5 V VCC = 2 V 4
Low-level input voltage VIL 0.5 V VCC = 2 V 4
Input voltage VI 0 5.5 V 4
Output voltage, 3-state VO 0 5.5 V 3-state 4
Output voltage, high or low state VO 0 V High or low state 4
High-level output current IOH -50 mA VCC = 2 V 4
High-level output current IOH -2 mA VCC = 2.3 V to 2.7 V 4
High-level output current IOH -8 mA VCC = 3 V to 3.6 V 4
High-level output current IOH -16 mA VCC = 4.5 V to 5.5 V 4
Low-level output current IOL 50 mA VCC = 2 V 5
Low-level output current IOL 2 mA VCC = 2.3 V to 2.7 V 5
Low-level output current IOL 8 mA VCC = 3 V to 3.6 V 5
Low-level output current IOL 16 mA VCC = 4.5 V to 5.5 V 5
Input transition rise or fall rate Δt/Δv 200 ns VCC = 2.3 V to 2.7 V 5
Input transition rise or fall rate Δt/Δv 100 ns VCC = 3 V to 3.6 V 5
Input transition rise or fall rate Δt/Δv 20 ns VCC = 4.5 V to 5.5 V 5
Operating free-air temperature TA -40 85 °C 5
High-level output voltage VOH 2 V IOH = −2 mA; VCC = 2.3 V 5
High-level output voltage VOH 2.48 V IOH = −8 mA; VCC = 3 V 5
High-level output voltage VOH 3.8 V IOH = −16 mA; VCC = 4.5 V 5
Low-level output voltage VOL 0.1 V IOL = 50 µA; VCC = 2 V to 5.5 V 5
Low-level output voltage VOL 0.4 V IOL = 2 mA; VCC = 2.3 V 5
Low-level output voltage VOL 0.44 V IOL = 8 mA; VCC = 3 V 5
Low-level output voltage VOL 0.55 V IOL = 16 mA; VCC = 4.5 V 5
Input leakage current II -1 1 µA VI = 5.5 V or GND; VCC = 0 to 5.5 V 5
Off-state output current IOZ -5 5 µA VO = VCC or GND; VCC = 5.5 V 5
Quiescent supply current ICC 20 µA VI = VCC or GND, IO = 0; VCC = 5.5 V 5
Power-off leakage current Ioff 5 µA VI or VO = 0 to 5.5 V; VCC = 0 5
Pulse duration LE high tw 5 ns VCC = 2.5 V ± 0.2 V; over operating free-air temperature range 6
Setup time, data before LE↓ tsu 3.5 ns VCC = 2.5 V ± 0.2 V; over operating free-air temperature range 6
Hold time, data after LE↓ th 1.5 ns VCC = 2.5 V ± 0.2 V; over operating free-air temperature range 6
Propagation delay D to Q tpd 1 8 ns VCC = 5 V ± 0.5 V; CL = 15 pF; over operating free-air temperature range 8
Propagation delay D to Q tpd 1 10 ns VCC = 5 V ± 0.5 V; CL = 50 pF; over operating free-air temperature range 8
Propagation delay LE to Q tpd 1 9 ns VCC = 5 V ± 0.5 V; CL = 15 pF; over operating free-air temperature range 8
Propagation delay LE to Q tpd 1 11 ns VCC = 5 V ± 0.5 V; CL = 50 pF; over operating free-air temperature range 8
Enable time OE to Q ten 1 9 ns VCC = 5 V ± 0.5 V; CL = 15 pF; over operating free-air temperature range 8
Enable time OE to Q ten 1 11 ns VCC = 5 V ± 0.5 V; CL = 50 pF; over operating free-air temperature range 8
Disable time OE to Q tdis 1 9 ns VCC = 5 V ± 0.5 V; CL = 15 pF; over operating free-air temperature range 8
Disable time OE to Q tdis 1 11 ns VCC = 5 V ± 0.5 V; CL = 50 pF; over operating free-air temperature range 8
Junction-to-ambient thermal resistance (DGV, TVSOP package) RθJA 92 °C/W DGV (TVSOP) package 5
Input capacitance Ci 1.8 pF VI = VCC or GND; VCC = 3.3 V 5

CAD (Adom-generated)

  • Symbol: SN74LV573ADGVR
  • Footprint: Adom_Gen:Texas_Instruments_SN74_a53846
  • 3D model: generated to fit the land (STEP)
  • 3D model files: sn74lv573adgvr-etched.step / sn74lv573adgvr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sn74lv573adgvr.step / sn74lv573adgvr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (30 pp, sha256 2e8cd936f7c7337d, retrieved 2026-11-06, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing. 3D model generated to fit that land.

Datasheet PDF