SN74LV541ATPWR

{
  "slug": "sn74lv541atpwr",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Buffers, Drivers, Receivers, Transceivers, TSSOP-20. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "logic",
    "sn74lv541atpwr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "sn74lv541atpwr.kicad_sym",
    "sn74lv541atpwr.kicad_mod",
    "sn74lv541atpwr.glb",
    "sn74lv541atpwr.step",
    "sn74lv541atpwr.lbr",
    "docs/hero.png",
    "docs/sn74lv541atpwr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "sn74lv541atpwr-hero.glb",
    "sn74lv541atpwr-hero.overlay.json"
  ],
  "component": {
    "mpn": "SN74LV541ATPWR",
    "manufacturer": "Texas Instruments",
    "package": "TSSOP-20",
    "pin_count": 20,
    "category": "Logic",
    "subcategory": "Buffers, Drivers, Receivers, Transceivers",
    "datasheet": "https://www.ti.com/lit/ds/symlink/sn74lv541at.pdf",
    "parts": {
      "symbol": "sn74lv541atpwr.kicad_sym",
      "footprint": "sn74lv541atpwr.kicad_mod",
      "model_3d": "sn74lv541atpwr-hero.glb",
      "model_3d_plain": "sn74lv541atpwr.glb",
      "model_3d_step": "sn74lv541atpwr-etched.step",
      "model_3d_step_plain": "sn74lv541atpwr.step",
      "lbr": "sn74lv541atpwr.lbr"
    },
    "distributor_links": {
      "lcsc": "C544577",
      "digikey": "296-18698-2-ND",
      "mouser": "595-SN74LV541ATPWR"
    },
    "distributor_check": {
      "checked_at": "2026-10-08T18:26:40Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-18698-2-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "595-SN74LV541ATPWR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "OE1",
        "type": "input",
        "description": "Active-low output enable for the first buffer group; if OE1 or OE2 is high, all corresponding outputs are placed in the high-impedance state, and OE should be tied to VCC through a pullup resistor to keep outputs high-impedance during power up or power down."
      },
      {
        "number": "2",
        "name": "A1",
        "type": "input",
        "description": "Data input to buffer channel 1, TTL-voltage compatible with VCC of 4.5 V to 5.5 V; unused inputs must be held at VCC or GND."
      },
      {
        "number": "3",
        "name": "A2",
        "type": "input",
        "description": "Data input to buffer channel 2, TTL-voltage compatible with VCC of 4.5 V to 5.5 V; unused inputs must be held at VCC or GND."
      },
      {
        "number": "4",
        "name": "A3",
        "type": "input",
        "description": "Data input to buffer channel 3, TTL-voltage compatible with VCC of 4.5 V to 5.5 V; unused inputs must be held at VCC or GND."
      },
      {
        "number": "5",
        "name": "A4",
        "type": "input",
        "description": "Data input to buffer channel 4, TTL-voltage compatible with VCC of 4.5 V to 5.5 V; unused inputs must be held at VCC or GND."
      },
      {
        "number": "6",
        "name": "A5",
        "type": "input",
        "description": "Data input to buffer channel 5, TTL-voltage compatible with VCC of 4.5 V to 5.5 V; unused inputs must be held at VCC or GND."
      },
      {
        "number": "7",
        "name": "A6",
        "type": "input",
        "description": "Data input to buffer channel 6, TTL-voltage compatible with VCC of 4.5 V to 5.5 V; unused inputs must be held at VCC or GND."
      },
      {
        "number": "8",
        "name": "A7",
        "type": "input",
        "description": "Data input to buffer channel 7, TTL-voltage compatible with VCC of 4.5 V to 5.5 V; unused inputs must be held at VCC or GND."
      },
      {
        "number": "9",
        "name": "A8",
        "type": "input",
        "description": "Data input to buffer channel 8, TTL-voltage compatible with VCC of 4.5 V to 5.5 V; unused inputs must be held at VCC or GND."
      },
      {
        "number": "10",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference pin for the device."
      },
      {
        "number": "11",
        "name": "Y8",
        "type": "tri_state",
        "description": "Noninverting 3-state output of channel 8 that provides noninverted data when enabled and is high-impedance when OE1 or OE2 is high."
      },
      {
        "number": "12",
        "name": "Y7",
        "type": "tri_state",
        "description": "Noninverting 3-state output of channel 7 that provides noninverted data when enabled and is high-impedance when OE1 or OE2 is high."
      },
      {
        "number": "13",
        "name": "Y6",
        "type": "tri_state",
        "description": "Noninverting 3-state output of channel 6 that provides noninverted data when enabled and is high-impedance when OE1 or OE2 is high."
      },
      {
        "number": "14",
        "name": "Y5",
        "type": "tri_state",
        "description": "Noninverting 3-state output of channel 5 that provides noninverted data when enabled and is high-impedance when OE1 or OE2 is high."
      },
      {
        "number": "15",
        "name": "Y4",
        "type": "tri_state",
        "description": "Noninverting 3-state output of channel 4 that provides noninverted data when enabled and is high-impedance when OE1 or OE2 is high."
      },
      {
        "number": "16",
        "name": "Y3",
        "type": "tri_state",
        "description": "Noninverting 3-state output of channel 3 that provides noninverted data when enabled and is high-impedance when OE1 or OE2 is high."
      },
      {
        "number": "17",
        "name": "Y2",
        "type": "tri_state",
        "description": "Noninverting 3-state output of channel 2 that provides noninverted data when enabled and is high-impedance when OE1 or OE2 is high."
      },
      {
        "number": "18",
        "name": "Y1",
        "type": "tri_state",
        "description": "Noninverting 3-state output of channel 1 that provides noninverted data when enabled and is high-impedance when OE1 or OE2 is high."
      },
      {
        "number": "19",
        "name": "OE2",
        "type": "input",
        "description": "Active-low output enable for the second buffer group; if OE1 or OE2 is high, all corresponding outputs are placed in the high-impedance state, and OE should be tied to VCC through a pullup resistor to keep outputs high-impedance during power up or power down."
      },
      {
        "number": "20",
        "name": "VCC",
        "type": "power_in",
        "description": "Positive supply, specified for 4.5 V to 5.5 V operation with absolute maximum of 7 V."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The PW (TSSOP-20) pin map is not printed as a clean numbered list in the extracted text; the names a; Pin types for the Y outputs are given as tri_state (3-state outputs per the datasheet). The datashee"
        ],
        "pages_sent": 22,
        "cost_usd": 0.0873,
        "at": "2026-10-08T18:26:18"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/sn74lv541at.pdf",
        "pages": 22,
        "sha256": "edf51e98d825a642",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 20,
        "described": 20,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "sn74lv541atpwr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          6.5,
          1.2
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "97339947f3a7196470ec2f1d9f9b92bb2fc2ab66ad53be0cf105192585ef3c9a",
        "checked": "2026-10-08",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "sn74lv541atpwr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          6.5,
          1.2
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "c903341e987f6d1b920a1889942e55adf394f16040fa0a0902139efa842f9a20",
        "checked": "2026-10-08",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}