← Commit history
sn74ls541dw: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
2 files changed
+102−22
package.json+60−20@@ -68,55 +68,55 @@ "number": "1", "name": "~{G1}", "type": "input",- "description": "Active-low output enable 1; when both G\u03051 and G\u03052 are LOW all eight Y outputs are enabled (non-inverting); when HIGH all Y outputs are forced to high-impedance regardless of data inputs."+ "description": "Active-low output enable 1; when both G̅1 and G̅2 are LOW all eight Y outputs are enabled (non-inverting); when HIGH all Y outputs are forced to high-impedance regardless of data inputs." }, { "number": "2", "name": "A1", "type": "input",- "description": "Data input 1; VIH \u2265 2.0 V, VIL \u2264 0.8 V; input clamp voltage VIK \u2264 \u22121.5 V at IIK = \u221218 mA."+ "description": "Data input 1; VIH ≥ 2.0 V, VIL ≤ 0.8 V; input clamp voltage VIK ≤ −1.5 V at IIK = −18 mA." }, { "number": "3", "name": "A2", "type": "input",- "description": "Data input 2; VIH \u2265 2.0 V, VIL \u2264 0.8 V; input clamp voltage VIK \u2264 \u22121.5 V at IIK = \u221218 mA."+ "description": "Data input 2; VIH ≥ 2.0 V, VIL ≤ 0.8 V; input clamp voltage VIK ≤ −1.5 V at IIK = −18 mA." }, { "number": "4", "name": "A3", "type": "input",- "description": "Data input 3; VIH \u2265 2.0 V, VIL \u2264 0.8 V; input clamp voltage VIK \u2264 \u22121.5 V at IIK = \u221218 mA."+ "description": "Data input 3; VIH ≥ 2.0 V, VIL ≤ 0.8 V; input clamp voltage VIK ≤ −1.5 V at IIK = −18 mA." }, { "number": "5", "name": "A4", "type": "input",- "description": "Data input 4; VIH \u2265 2.0 V, VIL \u2264 0.8 V; input clamp voltage VIK \u2264 \u22121.5 V at IIK = \u221218 mA."+ "description": "Data input 4; VIH ≥ 2.0 V, VIL ≤ 0.8 V; input clamp voltage VIK ≤ −1.5 V at IIK = −18 mA." }, { "number": "6", "name": "A5", "type": "input",- "description": "Data input 5; VIH \u2265 2.0 V, VIL \u2264 0.8 V; input clamp voltage VIK \u2264 \u22121.5 V at IIK = \u221218 mA."+ "description": "Data input 5; VIH ≥ 2.0 V, VIL ≤ 0.8 V; input clamp voltage VIK ≤ −1.5 V at IIK = −18 mA." }, { "number": "7", "name": "A6", "type": "input",- "description": "Data input 6; VIH \u2265 2.0 V, VIL \u2264 0.8 V; input clamp voltage VIK \u2264 \u22121.5 V at IIK = \u221218 mA."+ "description": "Data input 6; VIH ≥ 2.0 V, VIL ≤ 0.8 V; input clamp voltage VIK ≤ −1.5 V at IIK = −18 mA." }, { "number": "8", "name": "A7", "type": "input",- "description": "Data input 7; VIH \u2265 2.0 V, VIL \u2264 0.8 V; input clamp voltage VIK \u2264 \u22121.5 V at IIK = \u221218 mA."+ "description": "Data input 7; VIH ≥ 2.0 V, VIL ≤ 0.8 V; input clamp voltage VIK ≤ −1.5 V at IIK = −18 mA." }, { "number": "9", "name": "A8", "type": "input",- "description": "Data input 8; VIH \u2265 2.0 V, VIL \u2264 0.8 V; input clamp voltage VIK \u2264 \u22121.5 V at IIK = \u221218 mA."+ "description": "Data input 8; VIH ≥ 2.0 V, VIL ≤ 0.8 V; input clamp voltage VIK ≤ −1.5 V at IIK = −18 mA." }, { "number": "10",@@ -128,55 +128,55 @@ "number": "11", "name": "Y8", "type": "tri_state",- "description": "3-state non-inverting output 8; VOH \u2265 2.4 V at IOH = \u221212 mA, VOL \u2264 0.25 V at IOL = 12 mA; forced to high-impedance when G\u03051 or G\u03052 is HIGH."+ "description": "3-state non-inverting output 8; VOH ≥ 2.4 V at IOH = −12 mA, VOL ≤ 0.25 V at IOL = 12 mA; forced to high-impedance when G̅1 or G̅2 is HIGH." }, { "number": "12", "name": "Y7", "type": "tri_state",- "description": "3-state non-inverting output 7; VOH \u2265 2.4 V at IOH = \u221212 mA, VOL \u2264 0.25 V at IOL = 12 mA; forced to high-impedance when G\u03051 or G\u03052 is HIGH."+ "description": "3-state non-inverting output 7; VOH ≥ 2.4 V at IOH = −12 mA, VOL ≤ 0.25 V at IOL = 12 mA; forced to high-impedance when G̅1 or G̅2 is HIGH." }, { "number": "13", "name": "Y6", "type": "tri_state",- "description": "3-state non-inverting output 6; VOH \u2265 2.4 V at IOH = \u221212 mA, VOL \u2264 0.25 V at IOL = 12 mA; forced to high-impedance when G\u03051 or G\u03052 is HIGH."+ "description": "3-state non-inverting output 6; VOH ≥ 2.4 V at IOH = −12 mA, VOL ≤ 0.25 V at IOL = 12 mA; forced to high-impedance when G̅1 or G̅2 is HIGH." }, { "number": "14", "name": "Y5", "type": "tri_state",- "description": "3-state non-inverting output 5; VOH \u2265 2.4 V at IOH = \u221212 mA, VOL \u2264 0.25 V at IOL = 12 mA; forced to high-impedance when G\u03051 or G\u03052 is HIGH."+ "description": "3-state non-inverting output 5; VOH ≥ 2.4 V at IOH = −12 mA, VOL ≤ 0.25 V at IOL = 12 mA; forced to high-impedance when G̅1 or G̅2 is HIGH." }, { "number": "15", "name": "Y4", "type": "tri_state",- "description": "3-state non-inverting output 4; VOH \u2265 2.4 V at IOH = \u221212 mA, VOL \u2264 0.25 V at IOL = 12 mA; forced to high-impedance when G\u03051 or G\u03052 is HIGH."+ "description": "3-state non-inverting output 4; VOH ≥ 2.4 V at IOH = −12 mA, VOL ≤ 0.25 V at IOL = 12 mA; forced to high-impedance when G̅1 or G̅2 is HIGH." }, { "number": "16", "name": "Y3", "type": "tri_state",- "description": "3-state non-inverting output 3; VOH \u2265 2.4 V at IOH = \u221212 mA, VOL \u2264 0.25 V at IOL = 12 mA; forced to high-impedance when G\u03051 or G\u03052 is HIGH."+ "description": "3-state non-inverting output 3; VOH ≥ 2.4 V at IOH = −12 mA, VOL ≤ 0.25 V at IOL = 12 mA; forced to high-impedance when G̅1 or G̅2 is HIGH." }, { "number": "17", "name": "Y2", "type": "tri_state",- "description": "3-state non-inverting output 2; VOH \u2265 2.4 V at IOH = \u221212 mA, VOL \u2264 0.25 V at IOL = 12 mA; forced to high-impedance when G\u03051 or G\u03052 is HIGH."+ "description": "3-state non-inverting output 2; VOH ≥ 2.4 V at IOH = −12 mA, VOL ≤ 0.25 V at IOL = 12 mA; forced to high-impedance when G̅1 or G̅2 is HIGH." }, { "number": "18", "name": "Y1", "type": "tri_state",- "description": "3-state non-inverting output 1; VOH \u2265 2.4 V at IOH = \u221212 mA, VOL \u2264 0.25 V at IOL = 12 mA; forced to high-impedance when G\u03051 or G\u03052 is HIGH."+ "description": "3-state non-inverting output 1; VOH ≥ 2.4 V at IOH = −12 mA, VOL ≤ 0.25 V at IOL = 12 mA; forced to high-impedance when G̅1 or G̅2 is HIGH." }, { "number": "19", "name": "~{G2}", "type": "input",- "description": "Active-low output enable 2; when both G\u03051 and G\u03052 are LOW all eight Y outputs are enabled (non-inverting); when HIGH all Y outputs are forced to high-impedance regardless of data inputs."+ "description": "Active-low output enable 2; when both G̅1 and G̅2 are LOW all eight Y outputs are enabled (non-inverting); when HIGH all Y outputs are forced to high-impedance regardless of data inputs." }, { "number": "20",@@ -219,6 +219,46 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "sn74ls541dw.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 10.3,+ 12.8,+ 2.75+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "59a10b341e6972b31d81802a048060326da627d8b92dcf4263064f4f62ec808e",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "sn74ls541dw-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 10.3,+ 12.8,+ 2.75+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "3a83e75ac2128125091e9f2140d9f524c96db826171a73b9231bf79bac79ae59",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }-}+}
page.json+42−2@@ -204,7 +204,47 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "sn74ls541dw.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 10.3,+ 12.8,+ 2.75+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "59a10b341e6972b31d81802a048060326da627d8b92dcf4263064f4f62ec808e",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "sn74ls541dw-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 10.3,+ 12.8,+ 2.75+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "3a83e75ac2128125091e9f2140d9f524c96db826171a73b9231bf79bac79ae59",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }, "metadata": { "specs": {@@ -251,4 +291,4 @@ "visibility": { "public": true }-}+}