← Commit history

Initial commit: component/sn74ls193dr

Ray ·015f3ec950 ·
2 files changed +241
README.mdadded+52
@@ -0,0 +1,52 @@+# SN74LS193DR++**lingxingic** · Counters, Dividers · SOP-16++SN74LS193DR from lingxingic, in a SOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | D1 | input | Data input 1; loaded into counter when PL- is LOW. |+| 2 | Q1 | output | Counter output Q1; reflects state of counter bit 1. |+| 3 | Q0 | output | Counter output Q0 (least significant bit); reflects state of counter bit 0. |+| 4 | CPD | input | Count down clock input; LOW-to-HIGH transitions decrement counter when CPU is held HIGH. |+| 5 | CPU | input | Count up clock input; LOW-to-HIGH transitions increment counter when CPD is held HIGH. |+| 6 | Q2 | output | Counter output Q2; reflects state of counter bit 2. |+| 7 | Q3 | output | Counter output Q3 (most significant bit); reflects state of counter bit 3. |+| 8 | GND | power_in | Ground (0V); reference potential. |+| 9 | D3 | input | Data input 3; loaded into counter when PL- is LOW. |+| 10 | D2 | input | Data input 2; loaded into counter when PL- is LOW. |+| 11 | PL,  | input | Asynchronous parallel load input (active LOW); loads D0-D3 into counter when held LOW. |+| 12 | TCU,  | output | Terminal count up (carry) output (active LOW); goes LOW when counter reaches 15 (HHHH). |+| 13 | TCD,  | output | Terminal count down (borrow) output (active LOW); goes LOW when counter reaches 0 (LLLL). |+| 14 | MR | input | Asynchronous master reset input (active HIGH); sets all counter outputs Q0-Q3 to LOW when held HIGH. |+| 15 | D0 | input | Data input 0; loaded into counter when PL- is LOW. |+| 16 | VCC | power_in | Supply voltage; recommended operating range 2.0V to 6.0V per page 9. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | lingxingic |+| Package | SOP-16 |+| Category | Logic |+| Pins | 16 |++## CAD (KiCad official)++- Symbol: `SN74LS193DR`+- Footprint: `Package_SO:SOIC-16_3.9x9.9mm_P1.27mm`+- 3D model: SOP-16 (KiCad packages3D, STEP)+- 3D model files: `sn74ls193dr-etched.step` / `sn74ls193dr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sn74ls193dr.step` / `sn74ls193dr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [lingxingic datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603380558030249984) (24 pp, sha256 `d8392524ccdb6b42`, retrieved 2026-09-22, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/sn74ls193dr-datasheet.pdf)
page.jsonadded+189
@@ -0,0 +1,189 @@+{+  "slug": "sn74ls193dr",+  "version": "0.1.0",+  "type": "component",+  "description": "lingxingic Counters, Dividers, SOP-16. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "logic",+    "sn74ls193dr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "sn74ls193dr.kicad_sym",+    "sn74ls193dr.kicad_mod",+    "sn74ls193dr.glb",+    "sn74ls193dr.step",+    "sn74ls193dr.lbr",+    "docs/hero.png",+    "docs/sn74ls193dr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "SN74LS193DR",+    "manufacturer": "lingxingic",+    "package": "SOP-16",+    "pin_count": 16,+    "category": "Logic",+    "subcategory": "Counters, Dividers",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603380558030249984",+    "parts": {+      "symbol": "sn74ls193dr.kicad_sym",+      "footprint": "sn74ls193dr.kicad_mod",+      "model_3d": "sn74ls193dr-etched.glb",+      "model_3d_plain": "sn74ls193dr.glb",+      "model_3d_step": "sn74ls193dr-etched.step",+      "model_3d_step_plain": "sn74ls193dr.step",+      "lbr": "sn74ls193dr.lbr"+    },+    "distributor_links": {+      "lcsc": "C22449630"+    },+    "pins": [+      {+        "number": "1",+        "name": "D1",+        "type": "input",+        "description": "Data input 1; loaded into counter when PL- is LOW."+      },+      {+        "number": "2",+        "name": "Q1",+        "type": "output",+        "description": "Counter output Q1; reflects state of counter bit 1."+      },+      {+        "number": "3",+        "name": "Q0",+        "type": "output",+        "description": "Counter output Q0 (least significant bit); reflects state of counter bit 0."+      },+      {+        "number": "4",+        "name": "CPD",+        "type": "input",+        "description": "Count down clock input; LOW-to-HIGH transitions decrement counter when CPU is held HIGH."+      },+      {+        "number": "5",+        "name": "CPU",+        "type": "input",+        "description": "Count up clock input; LOW-to-HIGH transitions increment counter when CPD is held HIGH."+      },+      {+        "number": "6",+        "name": "Q2",+        "type": "output",+        "description": "Counter output Q2; reflects state of counter bit 2."+      },+      {+        "number": "7",+        "name": "Q3",+        "type": "output",+        "description": "Counter output Q3 (most significant bit); reflects state of counter bit 3."+      },+      {+        "number": "8",+        "name": "GND",+        "type": "power_in",+        "description": "Ground (0V); reference potential."+      },+      {+        "number": "9",+        "name": "D3",+        "type": "input",+        "description": "Data input 3; loaded into counter when PL- is LOW."+      },+      {+        "number": "10",+        "name": "D2",+        "type": "input",+        "description": "Data input 2; loaded into counter when PL- is LOW."+      },+      {+        "number": "11",+        "name": "PL—",+        "type": "input",+        "description": "Asynchronous parallel load input (active LOW); loads D0-D3 into counter when held LOW."+      },+      {+        "number": "12",+        "name": "TCU—",+        "type": "output",+        "description": "Terminal count up (carry) output (active LOW); goes LOW when counter reaches 15 (HHHH)."+      },+      {+        "number": "13",+        "name": "TCD—",+        "type": "output",+        "description": "Terminal count down (borrow) output (active LOW); goes LOW when counter reaches 0 (LLLL)."+      },+      {+        "number": "14",+        "name": "MR",+        "type": "input",+        "description": "Asynchronous master reset input (active HIGH); sets all counter outputs Q0-Q3 to LOW when held HIGH."+      },+      {+        "number": "15",+        "name": "D0",+        "type": "input",+        "description": "Data input 0; loaded into counter when PL- is LOW."+      },+      {+        "number": "16",+        "name": "VCC",+        "type": "power_in",+        "description": "Supply voltage; recommended operating range 2.0V to 6.0V per page 9."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [],+        "pages_sent": 24,+        "cost_usd": 0.2232,+        "at": "2026-09-22T11:03:33"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603380558030249984",+        "pages": 24,+        "sha256": "d8392524ccdb6b42",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 16,+        "described": 16,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file