component
SN74LS174N
Public Made by Adomby adom
lingxingic Flip Flops, DIP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSN74LS174N
lingxingic · Flip Flops · DIP-16
SN74LS174N from lingxingic, in a DIP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | MR | input | Asynchronous master reset input, active LOW. |
| 2 | Q0 | output | Data output of flip-flop 0. |
| 3 | D0 | input | Data input of flip-flop 0. |
| 4 | D1 | input | Data input of flip-flop 1. |
| 5 | Q1 | output | Data output of flip-flop 1. |
| 6 | D2 | input | Data input of flip-flop 2. |
| 7 | Q2 | output | Data output of flip-flop 2. |
| 8 | GND | power_in | Ground (0V). |
| 9 | CP | input | Clock input, triggered on the LOW-to-HIGH edge. |
| 10 | Q3 | output | Data output of flip-flop 3. |
| 11 | D3 | input | Data input of flip-flop 3. |
| 12 | Q4 | output | Data output of flip-flop 4. |
| 13 | D4 | input | Data input of flip-flop 4. |
| 14 | D5 | input | Data input of flip-flop 5. |
| 15 | Q5 | output | Data output of flip-flop 5. |
| 16 | VCC | power_in | Supply voltage; recommended range is 2.0 V to 6.0 V with 5.0 V typical. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | lingxingic |
| Package | DIP-16 |
| Category | Logic |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| supply voltage | VCC | -0.5 | 7 | V | 7 | ||
| supply current | ICC | 50 | mA | 7 | |||
| ground current | IGND | -50 | mA | 7 | |||
| input clamping current | IIK | -20 | 20 | mA | VI < -0.5V or VI > VCC+0.5V | 7 | |
| output clamping current | IOK | -20 | 20 | mA | VO < -0.5V or VO > VCC+0.5V | 7 | |
| output current | IO | -25 | 25 | mA | -0.5V < VO < VCC+0.5V | 7 | |
| storage temperature | Tstg | -65 | 150 | ℃ | 7 | ||
| soldering temperature (DIP) | TL | 245 | ℃ | 10s, DIP package | 7 | ||
| supply voltage | VCC | 2 | 5 | 6 | V | 7 | |
| input voltage | VI | 0 | V | maximum is VCC (not numeric) | 7 | ||
| output voltage | VO | 0 | V | maximum is VCC (not numeric) | 7 | ||
| ambient temperature | Tamb | -40 | 125 | ℃ | 7 | ||
| HIGH-level input voltage | VIH | 1.5 | V | Tamb=-40℃ to +125℃; VCC=2.0V | 8 | ||
| HIGH-level input voltage | VIH | 3.15 | V | Tamb=-40℃ to +125℃; VCC=4.5V | 8 | ||
| HIGH-level input voltage | VIH | 4.2 | V | Tamb=-40℃ to +125℃; VCC=6.0V | 8 | ||
| LOW-level input voltage | VIL | 0.5 | V | Tamb=-40℃ to +125℃; VCC=2.0V | 8 | ||
| LOW-level input voltage | VIL | 1.35 | V | Tamb=-40℃ to +125℃; VCC=4.5V | 8 | ||
| LOW-level input voltage | VIL | 1.8 | V | Tamb=-40℃ to +125℃; VCC=6.0V | 8 | ||
| HIGH-level output voltage | VOH | 1.9 | V | Tamb=-40℃ to +125℃; VCC=2.0V; IO=-20uA | 8 | ||
| HIGH-level output voltage | VOH | 4.4 | V | Tamb=-40℃ to +125℃; VCC=4.5V; IO=-20uA | 8 | ||
| HIGH-level output voltage | VOH | 5.9 | V | Tamb=-40℃ to +125℃; VCC=6.0V; IO=-20uA | 8 | ||
| HIGH-level output voltage | VOH | 3.7 | V | Tamb=-40℃ to +125℃; VCC=4.5V; IO=-4.0mA | 8 | ||
| HIGH-level output voltage | VOH | 5.2 | V | Tamb=-40℃ to +125℃; VCC=6.0V; IO=-5.2mA | 8 | ||
| LOW-level output voltage | VOL | 0.1 | V | Tamb=-40℃ to +125℃; VCC=2.0V; IO=20uA | 8 | ||
| LOW-level output voltage | VOL | 0.4 | V | Tamb=-40℃ to +125℃; VCC=4.5V; IO=4.0mA | 8 | ||
| input leakage current | II | -1 | 1 | uA | Tamb=-40℃ to +125℃; VCC=6.0V; VI=VCC or GND | 8 | |
| supply current | ICC | 160 | uA | Tamb=-40℃ to +125℃; VCC=6.0V; VI=VCC or GND; IO=0A | 8 | ||
| CP to Qn propagation delay | tPLH, tPHL | 250 | ns | Tamb=-40℃ to +125℃; VCC=2.0V; CL=50pF; see Figure 4 | 10 | ||
| CP to Qn propagation delay | tPLH, tPHL | 50 | ns | Tamb=-40℃ to +125℃; VCC=4.5V; CL=50pF; see Figure 4 | 10 | ||
| CP to Qn propagation delay | tPLH, tPHL | 43 | ns | Tamb=-40℃ to +125℃; VCC=6.0V; CL=50pF; see Figure 4 | 10 | ||
| MR to Qn HIGH to LOW propagation delay | tPHL | 225 | ns | Tamb=-40℃ to +125℃; VCC=2.0V; CL=50pF; see Figure 5 | 10 | ||
| MR to Qn HIGH to LOW propagation delay | tPHL | 45 | ns | Tamb=-40℃ to +125℃; VCC=4.5V; CL=50pF; see Figure 5 | 10 | ||
| MR to Qn HIGH to LOW propagation delay | tPHL | 38 | ns | Tamb=-40℃ to +125℃; VCC=6.0V; CL=50pF; see Figure 5 | 10 | ||
| transition time | tTHL, tTLH | 110 | ns | Tamb=-40℃ to +125℃; VCC=2.0V; CL=50pF; see Figure 4 | 10 | ||
| transition time | tTHL, tTLH | 22 | ns | Tamb=-40℃ to +125℃; VCC=4.5V; CL=50pF; see Figure 4 | 10 | ||
| transition time | tTHL, tTLH | 19 | ns | Tamb=-40℃ to +125℃; VCC=6.0V; CL=50pF; see Figure 4 | 10 | ||
| CP input HIGH or LOW pulse width | tW | 120 | ns | Tamb=-40℃ to +125℃; VCC=2.0V; CL=50pF; see Figure 4 | 10 | ||
| CP input HIGH or LOW pulse width | tW | 24 | ns | Tamb=-40℃ to +125℃; VCC=4.5V; CL=50pF; see Figure 4 | 10 | ||
| CP input HIGH or LOW pulse width | tW | 20 | ns | Tamb=-40℃ to +125℃; VCC=6.0V; CL=50pF; see Figure 4 | 10 | ||
| MR input LOW pulse width | 120 | ns | Tamb=-40℃ to +125℃; VCC=2.0V; CL=50pF; see Figure 5 | 10 | |||
| MR input LOW pulse width | 24 | ns | Tamb=-40℃ to +125℃; VCC=4.5V; CL=50pF; see Figure 5 | 10 | |||
| MR input LOW pulse width | 20 | ns | Tamb=-40℃ to +125℃; VCC=6.0V; CL=50pF; see Figure 5 | 10 | |||
| MR to CP recovery time | trec | 5 | ns | Tamb=-40℃ to +125℃; VCC=2.0V; CL=50pF; see Figure 5 | 10 | ||
| Dn to CP set-up time | tsu | 90 | ns | Tamb=-40℃ to +125℃; VCC=2.0V; CL=50pF; see Figure 4 | 10 | ||
| Dn to CP set-up time | tsu | 18 | ns | Tamb=-40℃ to +125℃; VCC=4.5V; CL=50pF; see Figure 4 | 10 | ||
| Dn to CP set-up time | tsu | 15 | ns | Tamb=-40℃ to +125℃; VCC=6.0V; CL=50pF; see Figure 4 | 10 | ||
| Dn to CP hold time | th | 3 | ns | Tamb=-40℃ to +125℃; VCC=2.0V; CL=50pF; see Figure 4 | 10 | ||
| maximum frequency | fmax | 4 | MHZ | Tamb=-40℃ to +125℃; VCC=2.0V; CL=50pF; see Figure 4 | 10 | ||
| maximum frequency | fmax | 20 | MHZ | Tamb=-40℃ to +125℃; VCC=4.5V; CL=50pF; see Figure 4 | 10 | ||
| maximum frequency | fmax | 24 | MHZ | Tamb=-40℃ to +125℃; VCC=6.0V; CL=50pF; see Figure 4 | 10 |
CAD (KiCad official)
- Symbol:
SN74LS174N - Footprint:
Package_DIP:DIP-16_W7.62mm - 3D model: DIP-16 (KiCad packages3D, STEP)
- 3D model files:
sn74ls174n-etched.step/sn74ls174n-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn74ls174n.step/sn74ls174n.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: lingxingic datasheet (16 pp, sha256
e1ad81f05f5037c8, retrieved 2026-10-15, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).