main
History Download
Ray Publish 0.1.0 f9b8148

SN74LS173AN

Texas Instruments · Flip Flops · PDIP-16

SN74LS173AN from Texas Instruments, in a PDIP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 M input Output-control input; when M or N (or both) is high, the outputs are disabled to the high-impedance state without affecting flip-flop sequencing.
2 N input Output-control input; when N or M (or both) is high, the outputs are disabled to the high-impedance state without affecting flip-flop sequencing.
3 1Q tri_state Register output Q of bit 1 with 3-state totem-pole drive, able to drive highly capacitive or low-impedance bus loads.
4 2Q tri_state Register output Q of bit 2 with 3-state totem-pole drive, able to drive highly capacitive or low-impedance bus loads.
5 3Q tri_state Register output Q of bit 3 with 3-state totem-pole drive, able to drive highly capacitive or low-impedance bus loads.
6 4Q tri_state Register output Q of bit 4 with 3-state totem-pole drive, able to drive highly capacitive or low-impedance bus loads.
7 CLK input Clock input; data is loaded on the positive transition of the buffered clock when both G1 and G2 are low.
8 GND power_in Ground reference for the device; voltages are referenced to the network ground terminal.
9 G1 input Data-enable input; when both G1 and G2 are low, data at the D inputs are loaded into the flip-flops on the next positive clock transition.
10 G2 input Data-enable input; when both G1 and G2 are low, data at the D inputs are loaded into the flip-flops on the next positive clock transition.
11 4D input Data input to the fourth flip-flop, loaded when both data-enable inputs are low on the next positive clock transition.
12 3D input Data input to the third flip-flop, loaded when both data-enable inputs are low on the next positive clock transition.
13 2D input Data input to the second flip-flop, loaded when both data-enable inputs are low on the next positive clock transition.
14 1D input Data input to the first flip-flop, loaded when both data-enable inputs are low on the next positive clock transition.
15 CLR input Asynchronous clear input; a low level clears the register outputs to L, independent of the clock.
16 VCC power_in Supply voltage; recommended 4.75 V to 5.25 V for SN74LS173A with 5 V nominal.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package PDIP-16
Category Logic ICs
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC 4.75 5 5.25 V 7
High-level output current IOH -2.6 mA 7
Low-level output current IOL 24 mA 7
Operating free-air temperature TA 0 70 °C 7
Supply voltage VCC -0.5 7 V Voltage values with respect to network ground terminal 4
Input voltage (LS173A) -0.5 7 V ’LS173A 4
Off-state output voltage -0.5 5.5 V 4
Storage temperature range Tstg -65 150 °C 4
Package thermal impedance, N package θJA 78 °C/W N package 4
High-level input voltage VIH 2 V 7
Low-level input voltage VIL 0.8 V 7
Input clamp voltage VIK -1.5 V VCC = MIN, II = -18 mA 7
High-level output voltage VOH 2.4 3.1 V VCC = MIN, VIL = VILmax, VIH = 2 V, IOH = MAX 7
Low-level output voltage VOL 0.25 0.4 V VCC = MIN, IOL = 12 mA 7
Low-level output voltage VOL 0.35 0.5 V VIL = 0.8 V, IOL = 24 mA 7
Off-state (high-impedance state) output current, high IO(off) 20 µA VCC = MAX, VO = 2.7 V, VIH = 2 V 7
Off-state (high-impedance state) output current, low IO(off) -20 µA VCC = MAX, VO = 0.4 V, VIH = 2 V 7
Input current at maximum input voltage II 0.1 mA VCC = MAX, VI = 7 V 7
High-level input current IIH 20 µA VCC = MAX, VI = 2.7 V 7
Low-level input current IIL -0.4 mA VCC = MAX, VI = 0.4 V 7
Short-circuit output current IOS -30 -130 mA VCC = MAX 7
Supply current ICC 19 24 mA VCC = MAX, See Note 4 7
Input clock frequency fclock 25 MHz 7
Pulse duration CLK or CLR tw 25 ns CLK or CLR 7
Pulse duration data enable tw 35 ns Data enable (G1, G2) 7
Setup time data tsu 17 ns Data 7
Setup time CLR inactive state tsu 10 ns CLR (inactive state) 7
Hold time data enable th 0 ns Data enable (G1, G2) 7
Hold time data th 3 ns Data 7
Propagation delay high-to-low from clear input tPHL 26 35 ns CL = 45 pF, RL = 667 Ω, VCC = 5 V, TA = 25°C 8
Propagation delay low-to-high from clock input tPLH 17 25 ns CL = 45 pF, RL = 667 Ω, VCC = 5 V, TA = 25°C 8
Propagation delay high-to-low from clock input tPHL 22 30 ns CL = 45 pF, RL = 667 Ω, VCC = 5 V, TA = 25°C 8

CAD (KiCad official)

  • Symbol: SN74LS173AN
  • Footprint: Package_DIP:DIP-16_W7.62mm
  • 3D model: PDIP-16 (KiCad packages3D, STEP)
  • 3D model files: sn74ls173an-etched.step / sn74ls173an-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sn74ls173an.step / sn74ls173an.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (19 pp, sha256 03904c6068c2e022, retrieved 2026-11-02, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF