component
SN74LS166ADR
Public Made by Adomby adom
Texas Instruments Shift Registers, SOIC-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+52@@ -0,0 +1,52 @@+# SN74LS166ADR++**Texas Instruments** · Shift Registers · SOIC-16++SN74LS166ADR from Texas Instruments, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | SER | input | Serial data input, enabled when SH/LD is high and coupled into the shift register on each clock pulse. |+| 2 | A | input | Parallel data input A, loaded synchronously on the next clock pulse when SH/LD is low. |+| 3 | B | input | Parallel data input B, loaded synchronously on the next clock pulse when SH/LD is low. |+| 4 | C | input | Parallel data input C, loaded synchronously on the next clock pulse when SH/LD is low. |+| 5 | D | input | Parallel data input D, loaded synchronously on the next clock pulse when SH/LD is low. |+| 6 | CLK INH | input | Clock inhibit input to a two-input positive NOR gate with CLK; high inhibits clocking, and it should be changed to high only while CLK is high. |+| 7 | CLK | input | Clock input, advanced on the low-to-high-level edge through a NOR gate with CLK INH. |+| 8 | GND | power_in | Ground. |+| 9 | CLR | input | Active-low buffered direct clear input that overrides all other inputs, including the clock, and sets all flip-flops to zero. |+| 10 | E | input | Parallel data input E, loaded synchronously on the next clock pulse when SH/LD is low. |+| 11 | F | input | Parallel data input F, loaded synchronously on the next clock pulse when SH/LD is low. |+| 12 | G | input | Parallel data input G, loaded synchronously on the next clock pulse when SH/LD is low. |+| 13 | QH | output | Serial output from the last (eighth) stage of the shift register. |+| 14 | H | input | Parallel data input H, loaded synchronously on the next clock pulse when SH/LD is low. |+| 15 | SH/LD | input | Shift/load select input; high enables serial data input and shifting, low enables parallel inputs and synchronous loading on the next clock pulse. |+| 16 | VCC | power_in | Positive supply voltage. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SOIC-16 |+| Category | Logic |+| Pins | 16 |++## CAD (KiCad official)++- Symbol: `SN74LS166ADR`+- Footprint: `Package_SO:SOIC-16_3.9x9.9mm_P1.27mm`+- 3D model: SOIC-16 (KiCad packages3D, STEP)+- 3D model files: `sn74ls166adr-etched.step` / `sn74ls166adr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sn74ls166adr.step` / `sn74ls166adr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/sn74ls166a.pdf) (24 pp, sha256 `643f0507a28f320b`, retrieved 2026-10-08, tier: manufacturer)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (vision), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/sn74ls166adr-datasheet.pdf)
page.jsonadded+249@@ -0,0 +1,249 @@+{+ "slug": "sn74ls166adr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Shift Registers, SOIC-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "logic",+ "sn74ls166adr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "sn74ls166adr.kicad_sym",+ "sn74ls166adr.kicad_mod",+ "sn74ls166adr.glb",+ "sn74ls166adr.step",+ "sn74ls166adr.lbr",+ "docs/hero.png",+ "docs/sn74ls166adr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "sn74ls166adr-hero.glb",+ "sn74ls166adr-hero.overlay.json"+ ],+ "component": {+ "mpn": "SN74LS166ADR",+ "manufacturer": "Texas Instruments",+ "package": "SOIC-16",+ "pin_count": 16,+ "category": "Logic",+ "subcategory": "Shift Registers",+ "datasheet": "https://www.ti.com/lit/ds/symlink/sn74ls166a.pdf",+ "parts": {+ "symbol": "sn74ls166adr.kicad_sym",+ "footprint": "sn74ls166adr.kicad_mod",+ "model_3d": "sn74ls166adr-hero.glb",+ "model_3d_plain": "sn74ls166adr.glb",+ "model_3d_step": "sn74ls166adr-etched.step",+ "model_3d_step_plain": "sn74ls166adr.step",+ "lbr": "sn74ls166adr.lbr"+ },+ "distributor_links": {+ "lcsc": "C2866113",+ "digikey": "296-49900-2-ND",+ "mouser": "595-SN74LS166ADR"+ },+ "distributor_check": {+ "checked_at": "2026-10-08T03:42:24Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-49900-2-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "595-SN74LS166ADR",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "SER",+ "type": "input",+ "description": "Serial data input, enabled when SH/LD is high and coupled into the shift register on each clock pulse."+ },+ {+ "number": "2",+ "name": "A",+ "type": "input",+ "description": "Parallel data input A, loaded synchronously on the next clock pulse when SH/LD is low."+ },+ {+ "number": "3",+ "name": "B",+ "type": "input",+ "description": "Parallel data input B, loaded synchronously on the next clock pulse when SH/LD is low."+ },+ {+ "number": "4",+ "name": "C",+ "type": "input",+ "description": "Parallel data input C, loaded synchronously on the next clock pulse when SH/LD is low."+ },+ {+ "number": "5",+ "name": "D",+ "type": "input",+ "description": "Parallel data input D, loaded synchronously on the next clock pulse when SH/LD is low."+ },+ {+ "number": "6",+ "name": "CLK INH",+ "type": "input",+ "description": "Clock inhibit input to a two-input positive NOR gate with CLK; high inhibits clocking, and it should be changed to high only while CLK is high."+ },+ {+ "number": "7",+ "name": "CLK",+ "type": "input",+ "description": "Clock input, advanced on the low-to-high-level edge through a NOR gate with CLK INH."+ },+ {+ "number": "8",+ "name": "GND",+ "type": "power_in",+ "description": "Ground."+ },+ {+ "number": "9",+ "name": "CLR",+ "type": "input",+ "description": "Active-low buffered direct clear input that overrides all other inputs, including the clock, and sets all flip-flops to zero."+ },+ {+ "number": "10",+ "name": "E",+ "type": "input",+ "description": "Parallel data input E, loaded synchronously on the next clock pulse when SH/LD is low."+ },+ {+ "number": "11",+ "name": "F",+ "type": "input",+ "description": "Parallel data input F, loaded synchronously on the next clock pulse when SH/LD is low."+ },+ {+ "number": "12",+ "name": "G",+ "type": "input",+ "description": "Parallel data input G, loaded synchronously on the next clock pulse when SH/LD is low."+ },+ {+ "number": "13",+ "name": "QH",+ "type": "output",+ "description": "Serial output from the last (eighth) stage of the shift register."+ },+ {+ "number": "14",+ "name": "H",+ "type": "input",+ "description": "Parallel data input H, loaded synchronously on the next clock pulse when SH/LD is low."+ },+ {+ "number": "15",+ "name": "SH/LD",+ "type": "input",+ "description": "Shift/load select input; high enables serial data input and shifting, low enables parallel inputs and synchronous loading on the next clock pulse."+ },+ {+ "number": "16",+ "name": "VCC",+ "type": "power_in",+ "description": "Positive supply voltage."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-sonnet-5-5",+ "primary_mode": "vision",+ "consensus_model": "claude-opus-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: Pinout is from page 1 only; the 'SN74LS166A ... D or N package' pinout is shared. Pages 4-12 were no",+ "vision extraction: provenance cannot be text-verified; needs consensus"+ ],+ "pages_sent": 12,+ "cost_usd": 0.2794,+ "at": "2026-10-08T03:41:53"+ },+ "datasheet": {+ "url": "https://www.ti.com/lit/ds/symlink/sn74ls166a.pdf",+ "pages": 24,+ "sha256": "643f0507a28f320b",+ "source_tier": "mfr"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 16,+ "described": 16,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "sn74ls166adr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6,+ 9.9,+ 1.75+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "d5eeddb4c0b304dc61950919b126fc61d7586abd5f16ab71a2a79759ec6498bf",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "sn74ls166adr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6,+ 9.9,+ 1.75+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "24f4cddc9af5fe3a736e20e846f0f1ee3a279416e7ff25fecb80c60e717416d7",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}