main
Ray Set visibility: public 6c0bad1
{
  "schema_version": 1,
  "type": "component",
  "slug": "sn74ls163an",
  "title": "SN74LS163AN",
  "brief": "Texas Instruments Counters / Dividers, DIP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "logic ics",
    "sn74ls163an",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "SN74LS163AN",
    "manufacturer": "Texas Instruments",
    "package": "DIP-16",
    "pin_count": 16,
    "category": "Logic ICs",
    "subcategory": "Counters / Dividers",
    "datasheet": "https://www.ti.com/lit/ds/symlink/sn74ls163a.pdf",
    "parts": {
      "symbol": "sn74ls163an.kicad_sym",
      "footprint": "sn74ls163an.kicad_mod",
      "model_3d": "sn74ls163an-hero.glb",
      "model_3d_plain": "sn74ls163an-etched.glb",
      "model_3d_step": "sn74ls163an-etched.step",
      "model_3d_step_plain": "sn74ls163an.step",
      "lbr": "sn74ls163an.lbr"
    },
    "distributor_links": {
      "lcsc": "C133560",
      "digikey": "2156-SN74LS163AN-ND",
      "mouser": "595-SN74LS163AN"
    },
    "distributor_check": {
      "checked_at": "2026-11-02T17:19:23Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "2156-SN74LS163AN-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "595-SN74LS163AN",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "CLR",
        "type": "input",
        "description": "Active-low clear that, on the 'LS163A, is synchronous: a low level sets all four flip-flop outputs low after the next clock pulse regardless of the enable inputs."
      },
      {
        "number": "2",
        "name": "CLK",
        "type": "input",
        "description": "Buffered clock input that triggers the four flip-flops on its rising edge."
      },
      {
        "number": "3",
        "name": "A",
        "type": "input",
        "description": "Data input A, the least-significant preset bit, loaded to output QA when LOAD is low and a clock pulse occurs."
      },
      {
        "number": "4",
        "name": "B",
        "type": "input",
        "description": "Data input B, loaded to output QB when LOAD is low and a clock pulse occurs."
      },
      {
        "number": "5",
        "name": "C",
        "type": "input",
        "description": "Data input C, loaded to output QC when LOAD is low and a clock pulse occurs."
      },
      {
        "number": "6",
        "name": "D",
        "type": "input",
        "description": "Data input D, the most-significant preset bit, loaded to output QD when LOAD is low and a clock pulse occurs."
      },
      {
        "number": "7",
        "name": "ENP",
        "type": "input",
        "description": "Count-enable input P; both ENP and ENT must be high for the counter to count."
      },
      {
        "number": "8",
        "name": "GND",
        "type": "power_in",
        "description": "Ground terminal; voltage values are with respect to this network ground terminal."
      },
      {
        "number": "9",
        "name": "LOAD",
        "type": "input",
        "description": "Active-low synchronous load: a low level disables the counter and makes the outputs agree with the data inputs after the next clock pulse regardless of the enable inputs."
      },
      {
        "number": "10",
        "name": "ENT",
        "type": "input",
        "description": "Count-enable input T; it must be high for counting and is fed forward to enable the ripple carry output RCO."
      },
      {
        "number": "11",
        "name": "QD",
        "type": "output",
        "description": "Flip-flop output D, the most-significant bit of the 4-bit binary count."
      },
      {
        "number": "12",
        "name": "QC",
        "type": "output",
        "description": "Flip-flop output C of the 4-bit binary count."
      },
      {
        "number": "13",
        "name": "QB",
        "type": "output",
        "description": "Flip-flop output B of the 4-bit binary count."
      },
      {
        "number": "14",
        "name": "QA",
        "type": "output",
        "description": "Flip-flop output A, the least-significant bit of the 4-bit binary count."
      },
      {
        "number": "15",
        "name": "RCO",
        "type": "output",
        "description": "Ripple carry output that gives a high-level pulse, approximately equal in duration to the high-level portion of QA, when the counter is enabled and at maximum count (15); used to enable cascaded stages."
      },
      {
        "number": "16",
        "name": "VCC",
        "type": "power_in",
        "description": "Positive supply voltage terminal."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-sonnet-5-5",
        "primary_mode": "text+vision",
        "consensus_model": "claude-opus-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The supply-voltage limits and other electrical ratings in the supplied text (page 12) are for the st; The pin assignment comes from the page 1 'N PACKAGE' top-view drawing, which covers the whole 160-16",
          "vision extraction: provenance cannot be text-verified; needs consensus"
        ],
        "pages_sent": 40,
        "cost_usd": 0.1189,
        "at": "2026-11-02T17:19:01"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/sn74ls163a.pdf",
        "pages": 40,
        "sha256": "0ea50a72dfbd95c3",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 16,
        "described": 16,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "sn74ls163an.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          7.874,
          19.177,
          6.98
        ],
        "zmin_mm": -3.3,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "17a30b1f0ab3fd5384a1231e3c63c394888d5b952c542a8c189e023ed3467464",
        "checked": "2026-11-02",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "sn74ls163an-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          7.874,
          19.177,
          6.98
        ],
        "zmin_mm": -3.3,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "5ae78138d90da13e6ffda1ac5ad54f942ba0cab6c9683a8c8ba535c413468f5d",
        "checked": "2026-11-02",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "DIP-16",
      "Category": "Logic ICs",
      "Pins": "16"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "sn74ls163an"
  ],
  "discovery_pitch": "SN74LS163AN (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "sn74ls163an.kicad_sym",
    "sn74ls163an.kicad_mod",
    "sn74ls163an.glb",
    "sn74ls163an.step",
    "sn74ls163an.lbr",
    "docs/hero.png",
    "docs/sn74ls163an-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "sn74ls163an-hero.glb",
    "sn74ls163an-hero.overlay.json",
    "sn74ls163an-etched.glb"
  ],
  "visibility": {
    "public": true
  }
}