main
Ray
Publish 0.1.0
2179818
SN74LS163AN
Texas Instruments · Counters / Dividers · DIP-16
SN74LS163AN from Texas Instruments, in a DIP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CLR | input | Active-low clear that, on the 'LS163A, is synchronous: a low level sets all four flip-flop outputs low after the next clock pulse regardless of the enable inputs. |
| 2 | CLK | input | Buffered clock input that triggers the four flip-flops on its rising edge. |
| 3 | A | input | Data input A, the least-significant preset bit, loaded to output QA when LOAD is low and a clock pulse occurs. |
| 4 | B | input | Data input B, loaded to output QB when LOAD is low and a clock pulse occurs. |
| 5 | C | input | Data input C, loaded to output QC when LOAD is low and a clock pulse occurs. |
| 6 | D | input | Data input D, the most-significant preset bit, loaded to output QD when LOAD is low and a clock pulse occurs. |
| 7 | ENP | input | Count-enable input P; both ENP and ENT must be high for the counter to count. |
| 8 | GND | power_in | Ground terminal; voltage values are with respect to this network ground terminal. |
| 9 | LOAD | input | Active-low synchronous load: a low level disables the counter and makes the outputs agree with the data inputs after the next clock pulse regardless of the enable inputs. |
| 10 | ENT | input | Count-enable input T; it must be high for counting and is fed forward to enable the ripple carry output RCO. |
| 11 | QD | output | Flip-flop output D, the most-significant bit of the 4-bit binary count. |
| 12 | QC | output | Flip-flop output C of the 4-bit binary count. |
| 13 | QB | output | Flip-flop output B of the 4-bit binary count. |
| 14 | QA | output | Flip-flop output A, the least-significant bit of the 4-bit binary count. |
| 15 | RCO | output | Ripple carry output that gives a high-level pulse, approximately equal in duration to the high-level portion of QA, when the counter is enabled and at maximum count (15); used to enable cascaded stages. |
| 16 | VCC | power_in | Positive supply voltage terminal. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | DIP-16 |
| Category | Logic ICs |
| Pins | 16 |
CAD (KiCad official)
- Symbol:
SN74LS163AN - Footprint:
Package_DIP:DIP-16_W7.62mm - 3D model: DIP-16 (KiCad packages3D, STEP)
- 3D model files:
sn74ls163an-etched.step/sn74ls163an-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn74ls163an.step/sn74ls163an.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (40 pp, sha256
0ea50a72dfbd95c3, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# SN74LS163AN
**Texas Instruments** · Counters / Dividers · DIP-16
SN74LS163AN from Texas Instruments, in a DIP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CLR | input | Active-low clear that, on the 'LS163A, is synchronous: a low level sets all four flip-flop outputs low after the next clock pulse regardless of the enable inputs. |
| 2 | CLK | input | Buffered clock input that triggers the four flip-flops on its rising edge. |
| 3 | A | input | Data input A, the least-significant preset bit, loaded to output QA when LOAD is low and a clock pulse occurs. |
| 4 | B | input | Data input B, loaded to output QB when LOAD is low and a clock pulse occurs. |
| 5 | C | input | Data input C, loaded to output QC when LOAD is low and a clock pulse occurs. |
| 6 | D | input | Data input D, the most-significant preset bit, loaded to output QD when LOAD is low and a clock pulse occurs. |
| 7 | ENP | input | Count-enable input P; both ENP and ENT must be high for the counter to count. |
| 8 | GND | power_in | Ground terminal; voltage values are with respect to this network ground terminal. |
| 9 | LOAD | input | Active-low synchronous load: a low level disables the counter and makes the outputs agree with the data inputs after the next clock pulse regardless of the enable inputs. |
| 10 | ENT | input | Count-enable input T; it must be high for counting and is fed forward to enable the ripple carry output RCO. |
| 11 | QD | output | Flip-flop output D, the most-significant bit of the 4-bit binary count. |
| 12 | QC | output | Flip-flop output C of the 4-bit binary count. |
| 13 | QB | output | Flip-flop output B of the 4-bit binary count. |
| 14 | QA | output | Flip-flop output A, the least-significant bit of the 4-bit binary count. |
| 15 | RCO | output | Ripple carry output that gives a high-level pulse, approximately equal in duration to the high-level portion of QA, when the counter is enabled and at maximum count (15); used to enable cascaded stages. |
| 16 | VCC | power_in | Positive supply voltage terminal. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | DIP-16 |
| Category | Logic ICs |
| Pins | 16 |
## CAD (KiCad official)
- Symbol: `SN74LS163AN`
- Footprint: `Package_DIP:DIP-16_W7.62mm`
- 3D model: DIP-16 (KiCad packages3D, STEP)
- 3D model files: `sn74ls163an-etched.step` / `sn74ls163an-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sn74ls163an.step` / `sn74ls163an.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/sn74ls163a.pdf) (40 pp, sha256 `0ea50a72dfbd95c3`, retrieved 2026-11-02, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text+vision), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/sn74ls163an-datasheet.pdf)