main
Ray
Publish 0.1.0
5851fe1
SN74HCT574NSR
Texas Instruments · Flip Flops · SO-20-208mil
SN74HCT574NSR from Texas Instruments, in a SO-20-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1OE | input | Output enable 1 for outputs 1Y1 to 1Y4: a low level enables the outputs, and a high level places them in the high-impedance state (function table, page 8). |
| 2 | 1A1 | input | Data input 1A1, TTL-voltage compatible with VIH of 2 V min and VIL of 0.8 V max at 4.5 V to 5.5 V, and input current of 1 µA max. |
| 3 | 2Y4 | tri_state | Output 2Y4 from the 3-state noninverting output set, able to drive bus lines directly with ±6 mA at 5 V. |
| 4 | 1A2 | input | Data input 1A2, TTL-voltage compatible with VIH of 2 V min and VIL of 0.8 V max at 4.5 V to 5.5 V, and input current of 1 µA max. |
| 5 | 2Y3 | tri_state | Output 2Y3 from the 3-state noninverting output set, able to drive bus lines directly with ±6 mA at 5 V. |
| 6 | 1A3 | input | Data input 1A3, TTL-voltage compatible with VIH of 2 V min and VIL of 0.8 V max at 4.5 V to 5.5 V, and input current of 1 µA max. |
| 7 | 2Y2 | tri_state | Output 2Y2 from the 3-state noninverting output set, able to drive bus lines directly with ±6 mA at 5 V. |
| 8 | 1A4 | input | Data input 1A4, TTL-voltage compatible with VIH of 2 V min and VIL of 0.8 V max at 4.5 V to 5.5 V, and input current of 1 µA max. |
| 9 | 2Y1 | tri_state | Output 2Y1 from the 3-state noninverting output set, able to drive bus lines directly with ±6 mA at 5 V. |
| 10 | GND | power_in | Ground reference pin for the device. |
| 11 | 2A1 | input | Data input 2A1, TTL-voltage compatible with VIH of 2 V min and VIL of 0.8 V max at 4.5 V to 5.5 V, and input current of 1 µA max. |
| 12 | 1Y4 | tri_state | Output 1Y4 from the 3-state noninverting output set, able to drive bus lines directly with ±6 mA at 5 V. |
| 13 | 2A2 | input | Data input 2A2, TTL-voltage compatible with VIH of 2 V min and VIL of 0.8 V max at 4.5 V to 5.5 V, and input current of 1 µA max. |
| 14 | 1Y3 | tri_state | Output 1Y3 from the 3-state noninverting output set, able to drive bus lines directly with ±6 mA at 5 V. |
| 15 | 2A3 | input | Data input 2A3, TTL-voltage compatible with VIH of 2 V min and VIL of 0.8 V max at 4.5 V to 5.5 V, and input current of 1 µA max. |
| 16 | 1Y2 | tri_state | Output 1Y2 from the 3-state noninverting output set, able to drive bus lines directly with ±6 mA at 5 V. |
| 17 | 2A4 | input | Data input 2A4, TTL-voltage compatible with VIH of 2 V min and VIL of 0.8 V max at 4.5 V to 5.5 V, and input current of 1 µA max. |
| 18 | 1Y1 | tri_state | Output 1Y1 from the 3-state noninverting output set, able to drive bus lines directly with ±6 mA at 5 V. |
| 19 | 2OE | input | Output enable 2 for outputs 2Y1 to 2Y4: a low level enables the outputs, and a high level places them in the high-impedance state (function table, page 8). |
| 20 | VCC | power_in | Supply pin, 4.5 V to 5.5 V recommended, to be bypassed with a 0.1 µF capacitor placed as close to the pin as possible. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SO-20-208mil |
| Category | Logic ICs |
| Pins | 20 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| High-level output voltage | VOH | 4.4 | 4.499 | V | VI = VIH or VIL, IOH = −20 μA, VCC = 4.5 V; typ at TA = 25°C | 5 | |
| High-level output voltage | VOH | 3.84 | 4.3 | V | VI = VIH or VIL, IOH = −6 mA, VCC = 4.5 V; typ at TA = 25°C | 5 | |
| Low-level output voltage | VOL | 0.001 | 0.1 | V | VI = VIH or VIL, IOL = 20 μA, VCC = 4.5 V; typ at TA = 25°C | 5 | |
| Low-level output voltage | VOL | 0.17 | 0.33 | V | VI = VIH or VIL, IOL = 6 mA, VCC = 4.5 V; typ at TA = 25°C | 5 | |
| Input current | II | -1000 | 0.1 | 1000 | nA | VI = VCC or 0, VCC = 5.5 V; typ is ±0.1 at TA = 25°C | 5 |
| Off-state (high-impedance) output current | IOZ | -5 | 0.01 | 5 | μA | VO = VCC or 0, VCC = 5.5 V; typ is ±0.01 at TA = 25°C | 5 |
| Quiescent supply current | ICC | 8 | 80 | μA | VI = VCC or 0, IO = 0, VCC = 5.5 V | 5 | |
| Supply current increase per TTL-level input | ΔICC | 1.4 | 2.9 | mA | One input at 0.5 V or 2.4 V, other inputs at 0 or VCC, VCC = 5.5 V | 5 | |
| Input capacitance | Ci | 3 | 10 | pF | VCC = 4.5 V to 5.5 V | 5 | |
| Supply voltage | VCC | 4.5 | 5 | 5.5 | V | 4 | |
| High-level input voltage | VIH | 2 | V | VCC = 4.5 V to 5.5 V | 4 | ||
| Low-level input voltage | VIL | 0.8 | V | VCC = 4.5 V to 5.5 V | 4 | ||
| Input voltage | VI | 0 | V | Maximum printed as VCC | 4 | ||
| Output voltage | VO | 0 | V | Maximum printed as VCC | 4 | ||
| Input transition rise/fall time | Δt/Δv | 500 | ns | 4 | |||
| Operating free-air temperature | TA | -40 | 85 | °C | SN74HCT574 range | 4 | |
| Supply voltage range | VCC | -0.5 | 7 | V | 4 | ||
| Input clamp current | IIK | -20 | 20 | mA | VI < 0 or VI > VCC | 4 | |
| Output clamp current | IOK | -20 | 20 | mA | VO < 0 or VO > VCC | 4 | |
| Continuous output current | IO | -35 | 35 | mA | VO = 0 to VCC | 4 | |
| Continuous current through VCC or GND | ICC/IGND | -70 | 70 | mA | 4 | ||
| Junction temperature | TJ | 150 | ℃ | 4 | |||
| Storage temperature range | Tstg | -65 | 150 | ℃ | 4 | ||
| Clock frequency | fclock | 24 | MHz | VCC = 4.5 V | 5 | ||
| Clock frequency | fclock | 27 | MHz | VCC = 5.5 V | 5 | ||
| Pulse duration, CLK high or low | tw | 20 | ns | VCC = 4.5 V | 5 | ||
| Pulse duration, CLK high or low | tw | 18 | ns | VCC = 5.5 V | 5 | ||
| Setup time, data before CLK↑ | tsu | 25 | ns | VCC = 4.5 V | 5 | ||
| Setup time, data before CLK↑ | tsu | 23 | ns | VCC = 5.5 V | 5 | ||
| Hold time, data after CLK↑ | th | 5 | ns | VCC = 4.5 V | 5 | ||
| Maximum clock frequency (CL = 50 pF) | fmax | 24 | 30 | MHz | CL = 50 pF, VCC = 4.5 V; typ at TA = 25°C | 5 | |
| Maximum clock frequency (CL = 50 pF) | fmax | 27 | 33 | MHz | CL = 50 pF, VCC = 5.5 V; typ at TA = 25°C | 5 | |
| Propagation delay CLK to any Q (CL = 50 pF) | tpd | 30 | 45 | ns | CL = 50 pF, VCC = 4.5 V; typ at TA = 25°C | 5 | |
| Propagation delay CLK to any Q (CL = 50 pF) | tpd | 25 | 41 | ns | CL = 50 pF, VCC = 5.5 V; typ at TA = 25°C | 5 | |
| Enable time OE to any Q (CL = 50 pF) | ten | 26 | 38 | ns | CL = 50 pF, VCC = 4.5 V; typ at TA = 25°C | 5 | |
| Enable time OE to any Q (CL = 50 pF) | ten | 23 | 34 | ns | CL = 50 pF, VCC = 5.5 V; typ at TA = 25°C | 5 | |
| Disable time OE to any Q (CL = 50 pF) | tdis | 23 | 38 | ns | CL = 50 pF, VCC = 4.5 V; typ at TA = 25°C | 5 | |
| Disable time OE to any Q (CL = 50 pF) | tdis | 22 | 34 | ns | CL = 50 pF, VCC = 5.5 V; typ at TA = 25°C | 5 | |
| Transition time any Q (CL = 50 pF) | tt | 10 | 15 | ns | CL = 50 pF, VCC = 4.5 V; typ at TA = 25°C | 5 | |
| Transition time any Q (CL = 50 pF) | tt | 9 | 14 | ns | CL = 50 pF, VCC = 5.5 V; typ at TA = 25°C | 5 | |
| Maximum clock frequency (CL = 150 pF) | fmax | 24 | 30 | MHz | CL = 150 pF, VCC = 4.5 V; typ at TA = 25°C | 6 | |
| Maximum clock frequency (CL = 150 pF) | fmax | 27 | 33 | MHz | CL = 150 pF, VCC = 5.5 V; typ at TA = 25°C | 6 | |
| Propagation delay CLK to any Q (CL = 150 pF) | tpd | 40 | 66 | ns | CL = 150 pF, VCC = 4.5 V; typ at TA = 25°C | 6 | |
| Propagation delay CLK to any Q (CL = 150 pF) | tpd | 35 | 60 | ns | CL = 150 pF, VCC = 5.5 V; typ at TA = 25°C | 6 | |
| Enable time OE to any Q (CL = 150 pF) | ten | 34 | 59 | ns | CL = 150 pF, VCC = 4.5 V; typ at TA = 25°C | 6 | |
| Enable time OE to any Q (CL = 150 pF) | ten | 29 | 78 | ns | CL = 150 pF, VCC = 5.5 V; typ at TA = 25°C | 6 | |
| Transition time any Q (CL = 150 pF) | tt | 18 | 53 | ns | CL = 150 pF, VCC = 4.5 V; typ at TA = 25°C | 6 | |
| Transition time any Q (CL = 150 pF) | tt | 16 | 48 | ns | CL = 150 pF, VCC = 5.5 V; typ at TA = 25°C | 6 | |
| Junction-to-ambient thermal resistance (NS/SO-20) | RθJA | 113.4 | °C/W | NS (SO) 20-pin package | 4 | ||
| Junction-to-case (top) thermal resistance (NS/SO-20) | RθJC(top) | 78.6 | °C/W | NS (SO) 20-pin package | 4 | ||
| Junction-to-board thermal resistance (NS/SO-20) | RθJB | 78.4 | °C/W | NS (SO) 20-pin package | 4 | ||
| Junction-to-top characterization parameter (NS/SO-20) | ψJT | 47.1 | °C/W | NS (SO) 20-pin package | 4 | ||
| Junction-to-board characterization parameter (NS/SO-20) | ψJB | 78.1 | °C/W | NS (SO) 20-pin package | 4 |
CAD (KiCad official)
- Symbol:
SN74HCT574NSR - Footprint:
Package_SO:SO-20_5.3x12.6mm_P1.27mm - 3D model: SO-20-208mil, generated on the KiCad land (body 5.3 x 12.6 mm, terminals on the pads, 1.75 mm tall, family nominal (no datasheet A read)). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
sn74hct574nsr-etched.step/sn74hct574nsr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn74hct574nsr.step/sn74hct574nsr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (30 pp, sha256
741ea0d0fbeb1d5c, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# SN74HCT574NSR
**Texas Instruments** · Flip Flops · SO-20-208mil
SN74HCT574NSR from Texas Instruments, in a SO-20-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1OE | input | Output enable 1 for outputs 1Y1 to 1Y4: a low level enables the outputs, and a high level places them in the high-impedance state (function table, page 8). |
| 2 | 1A1 | input | Data input 1A1, TTL-voltage compatible with VIH of 2 V min and VIL of 0.8 V max at 4.5 V to 5.5 V, and input current of 1 µA max. |
| 3 | 2Y4 | tri_state | Output 2Y4 from the 3-state noninverting output set, able to drive bus lines directly with ±6 mA at 5 V. |
| 4 | 1A2 | input | Data input 1A2, TTL-voltage compatible with VIH of 2 V min and VIL of 0.8 V max at 4.5 V to 5.5 V, and input current of 1 µA max. |
| 5 | 2Y3 | tri_state | Output 2Y3 from the 3-state noninverting output set, able to drive bus lines directly with ±6 mA at 5 V. |
| 6 | 1A3 | input | Data input 1A3, TTL-voltage compatible with VIH of 2 V min and VIL of 0.8 V max at 4.5 V to 5.5 V, and input current of 1 µA max. |
| 7 | 2Y2 | tri_state | Output 2Y2 from the 3-state noninverting output set, able to drive bus lines directly with ±6 mA at 5 V. |
| 8 | 1A4 | input | Data input 1A4, TTL-voltage compatible with VIH of 2 V min and VIL of 0.8 V max at 4.5 V to 5.5 V, and input current of 1 µA max. |
| 9 | 2Y1 | tri_state | Output 2Y1 from the 3-state noninverting output set, able to drive bus lines directly with ±6 mA at 5 V. |
| 10 | GND | power_in | Ground reference pin for the device. |
| 11 | 2A1 | input | Data input 2A1, TTL-voltage compatible with VIH of 2 V min and VIL of 0.8 V max at 4.5 V to 5.5 V, and input current of 1 µA max. |
| 12 | 1Y4 | tri_state | Output 1Y4 from the 3-state noninverting output set, able to drive bus lines directly with ±6 mA at 5 V. |
| 13 | 2A2 | input | Data input 2A2, TTL-voltage compatible with VIH of 2 V min and VIL of 0.8 V max at 4.5 V to 5.5 V, and input current of 1 µA max. |
| 14 | 1Y3 | tri_state | Output 1Y3 from the 3-state noninverting output set, able to drive bus lines directly with ±6 mA at 5 V. |
| 15 | 2A3 | input | Data input 2A3, TTL-voltage compatible with VIH of 2 V min and VIL of 0.8 V max at 4.5 V to 5.5 V, and input current of 1 µA max. |
| 16 | 1Y2 | tri_state | Output 1Y2 from the 3-state noninverting output set, able to drive bus lines directly with ±6 mA at 5 V. |
| 17 | 2A4 | input | Data input 2A4, TTL-voltage compatible with VIH of 2 V min and VIL of 0.8 V max at 4.5 V to 5.5 V, and input current of 1 µA max. |
| 18 | 1Y1 | tri_state | Output 1Y1 from the 3-state noninverting output set, able to drive bus lines directly with ±6 mA at 5 V. |
| 19 | 2OE | input | Output enable 2 for outputs 2Y1 to 2Y4: a low level enables the outputs, and a high level places them in the high-impedance state (function table, page 8). |
| 20 | VCC | power_in | Supply pin, 4.5 V to 5.5 V recommended, to be bypassed with a 0.1 µF capacitor placed as close to the pin as possible. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SO-20-208mil |
| Category | Logic ICs |
| Pins | 20 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| High-level output voltage | VOH | 4.4 | 4.499 | | V | VI = VIH or VIL, IOH = −20 μA, VCC = 4.5 V; typ at TA = 25°C | 5 |
| High-level output voltage | VOH | 3.84 | 4.3 | | V | VI = VIH or VIL, IOH = −6 mA, VCC = 4.5 V; typ at TA = 25°C | 5 |
| Low-level output voltage | VOL | | 0.001 | 0.1 | V | VI = VIH or VIL, IOL = 20 μA, VCC = 4.5 V; typ at TA = 25°C | 5 |
| Low-level output voltage | VOL | | 0.17 | 0.33 | V | VI = VIH or VIL, IOL = 6 mA, VCC = 4.5 V; typ at TA = 25°C | 5 |
| Input current | II | -1000 | 0.1 | 1000 | nA | VI = VCC or 0, VCC = 5.5 V; typ is ±0.1 at TA = 25°C | 5 |
| Off-state (high-impedance) output current | IOZ | -5 | 0.01 | 5 | μA | VO = VCC or 0, VCC = 5.5 V; typ is ±0.01 at TA = 25°C | 5 |
| Quiescent supply current | ICC | | 8 | 80 | μA | VI = VCC or 0, IO = 0, VCC = 5.5 V | 5 |
| Supply current increase per TTL-level input | ΔICC | | 1.4 | 2.9 | mA | One input at 0.5 V or 2.4 V, other inputs at 0 or VCC, VCC = 5.5 V | 5 |
| Input capacitance | Ci | | 3 | 10 | pF | VCC = 4.5 V to 5.5 V | 5 |
| Supply voltage | VCC | 4.5 | 5 | 5.5 | V | | 4 |
| High-level input voltage | VIH | 2 | | | V | VCC = 4.5 V to 5.5 V | 4 |
| Low-level input voltage | VIL | | | 0.8 | V | VCC = 4.5 V to 5.5 V | 4 |
| Input voltage | VI | 0 | | | V | Maximum printed as VCC | 4 |
| Output voltage | VO | 0 | | | V | Maximum printed as VCC | 4 |
| Input transition rise/fall time | Δt/Δv | | | 500 | ns | | 4 |
| Operating free-air temperature | TA | -40 | | 85 | °C | SN74HCT574 range | 4 |
| Supply voltage range | VCC | -0.5 | | 7 | V | | 4 |
| Input clamp current | IIK | -20 | | 20 | mA | VI < 0 or VI > VCC | 4 |
| Output clamp current | IOK | -20 | | 20 | mA | VO < 0 or VO > VCC | 4 |
| Continuous output current | IO | -35 | | 35 | mA | VO = 0 to VCC | 4 |
| Continuous current through VCC or GND | ICC/IGND | -70 | | 70 | mA | | 4 |
| Junction temperature | TJ | | | 150 | ℃ | | 4 |
| Storage temperature range | Tstg | -65 | | 150 | ℃ | | 4 |
| Clock frequency | fclock | 24 | | | MHz | VCC = 4.5 V | 5 |
| Clock frequency | fclock | 27 | | | MHz | VCC = 5.5 V | 5 |
| Pulse duration, CLK high or low | tw | 20 | | | ns | VCC = 4.5 V | 5 |
| Pulse duration, CLK high or low | tw | 18 | | | ns | VCC = 5.5 V | 5 |
| Setup time, data before CLK↑ | tsu | 25 | | | ns | VCC = 4.5 V | 5 |
| Setup time, data before CLK↑ | tsu | 23 | | | ns | VCC = 5.5 V | 5 |
| Hold time, data after CLK↑ | th | 5 | | | ns | VCC = 4.5 V | 5 |
| Maximum clock frequency (CL = 50 pF) | fmax | 24 | 30 | | MHz | CL = 50 pF, VCC = 4.5 V; typ at TA = 25°C | 5 |
| Maximum clock frequency (CL = 50 pF) | fmax | 27 | 33 | | MHz | CL = 50 pF, VCC = 5.5 V; typ at TA = 25°C | 5 |
| Propagation delay CLK to any Q (CL = 50 pF) | tpd | | 30 | 45 | ns | CL = 50 pF, VCC = 4.5 V; typ at TA = 25°C | 5 |
| Propagation delay CLK to any Q (CL = 50 pF) | tpd | | 25 | 41 | ns | CL = 50 pF, VCC = 5.5 V; typ at TA = 25°C | 5 |
| Enable time OE to any Q (CL = 50 pF) | ten | | 26 | 38 | ns | CL = 50 pF, VCC = 4.5 V; typ at TA = 25°C | 5 |
| Enable time OE to any Q (CL = 50 pF) | ten | | 23 | 34 | ns | CL = 50 pF, VCC = 5.5 V; typ at TA = 25°C | 5 |
| Disable time OE to any Q (CL = 50 pF) | tdis | | 23 | 38 | ns | CL = 50 pF, VCC = 4.5 V; typ at TA = 25°C | 5 |
| Disable time OE to any Q (CL = 50 pF) | tdis | | 22 | 34 | ns | CL = 50 pF, VCC = 5.5 V; typ at TA = 25°C | 5 |
| Transition time any Q (CL = 50 pF) | tt | | 10 | 15 | ns | CL = 50 pF, VCC = 4.5 V; typ at TA = 25°C | 5 |
| Transition time any Q (CL = 50 pF) | tt | | 9 | 14 | ns | CL = 50 pF, VCC = 5.5 V; typ at TA = 25°C | 5 |
| Maximum clock frequency (CL = 150 pF) | fmax | 24 | 30 | | MHz | CL = 150 pF, VCC = 4.5 V; typ at TA = 25°C | 6 |
| Maximum clock frequency (CL = 150 pF) | fmax | 27 | 33 | | MHz | CL = 150 pF, VCC = 5.5 V; typ at TA = 25°C | 6 |
| Propagation delay CLK to any Q (CL = 150 pF) | tpd | | 40 | 66 | ns | CL = 150 pF, VCC = 4.5 V; typ at TA = 25°C | 6 |
| Propagation delay CLK to any Q (CL = 150 pF) | tpd | | 35 | 60 | ns | CL = 150 pF, VCC = 5.5 V; typ at TA = 25°C | 6 |
| Enable time OE to any Q (CL = 150 pF) | ten | | 34 | 59 | ns | CL = 150 pF, VCC = 4.5 V; typ at TA = 25°C | 6 |
| Enable time OE to any Q (CL = 150 pF) | ten | | 29 | 78 | ns | CL = 150 pF, VCC = 5.5 V; typ at TA = 25°C | 6 |
| Transition time any Q (CL = 150 pF) | tt | | 18 | 53 | ns | CL = 150 pF, VCC = 4.5 V; typ at TA = 25°C | 6 |
| Transition time any Q (CL = 150 pF) | tt | | 16 | 48 | ns | CL = 150 pF, VCC = 5.5 V; typ at TA = 25°C | 6 |
| Junction-to-ambient thermal resistance (NS/SO-20) | RθJA | | 113.4 | | °C/W | NS (SO) 20-pin package | 4 |
| Junction-to-case (top) thermal resistance (NS/SO-20) | RθJC(top) | | 78.6 | | °C/W | NS (SO) 20-pin package | 4 |
| Junction-to-board thermal resistance (NS/SO-20) | RθJB | | 78.4 | | °C/W | NS (SO) 20-pin package | 4 |
| Junction-to-top characterization parameter (NS/SO-20) | ψJT | | 47.1 | | °C/W | NS (SO) 20-pin package | 4 |
| Junction-to-board characterization parameter (NS/SO-20) | ψJB | | 78.1 | | °C/W | NS (SO) 20-pin package | 4 |
## CAD (KiCad official)
- Symbol: `SN74HCT574NSR`
- Footprint: `Package_SO:SO-20_5.3x12.6mm_P1.27mm`
- 3D model: SO-20-208mil, generated on the KiCad land (body 5.3 x 12.6 mm, terminals on the pads, 1.75 mm tall, family nominal (no datasheet A read)). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `sn74hct574nsr-etched.step` / `sn74hct574nsr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sn74hct574nsr.step` / `sn74hct574nsr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/sn74hct574.pdf) (30 pp, sha256 `741ea0d0fbeb1d5c`, retrieved 2026-11-13, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/sn74hct574nsr-datasheet.pdf)