main
Ray
Publish 0.1.0
8ea9a45
SN74HCT373N
Texas Instruments · Latches · DIP-20
SN74HCT373N from Texas Instruments, in a DIP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OE | input | Active-low output enable: when OE is low the eight Q outputs are in their normal logic states, and when OE is high all Q outputs are forced to the high-impedance (Z) state without affecting the latches. |
| 2 | 1Q | tri_state | Latch 1 3-state true output, which follows D input while LE is high and holds the latched level when LE is low, and can drive up to 15 LSTTL loads with ±6 mA output drive at 5 V. |
| 3 | 1D | input | Latch 1 data input, TTL-voltage compatible with input current of 1 μA max, sampled when LE falls. |
| 4 | 2D | input | Latch 2 data input, TTL-voltage compatible with input current of 1 μA max, sampled when LE falls. |
| 5 | 2Q | tri_state | Latch 2 3-state true output, which follows D input while LE is high and holds the latched level when LE is low, and can drive up to 15 LSTTL loads with ±6 mA output drive at 5 V. |
| 6 | 3Q | tri_state | Latch 3 3-state true output, which follows D input while LE is high and holds the latched level when LE is low, and can drive up to 15 LSTTL loads with ±6 mA output drive at 5 V. |
| 7 | 3D | input | Latch 3 data input, TTL-voltage compatible with input current of 1 μA max, sampled when LE falls. |
| 8 | 4D | input | Latch 4 data input, TTL-voltage compatible with input current of 1 μA max, sampled when LE falls. |
| 9 | 4Q | tri_state | Latch 4 3-state true output, which follows D input while LE is high and holds the latched level when LE is low, and can drive up to 15 LSTTL loads with ±6 mA output drive at 5 V. |
| 10 | GND | power_in | Ground reference pin for the device. |
| 11 | LE | input | Latch-enable input: while high the Q outputs follow the D inputs, and when taken low the Q outputs are latched at the levels set up at the D inputs. |
| 12 | 5Q | tri_state | Latch 5 3-state true output, which follows D input while LE is high and holds the latched level when LE is low, and can drive up to 15 LSTTL loads with ±6 mA output drive at 5 V. |
| 13 | 5D | input | Latch 5 data input, TTL-voltage compatible with input current of 1 μA max, sampled when LE falls. |
| 14 | 6D | input | Latch 6 data input, TTL-voltage compatible with input current of 1 μA max, sampled when LE falls. |
| 15 | 6Q | tri_state | Latch 6 3-state true output, which follows D input while LE is high and holds the latched level when LE is low, and can drive up to 15 LSTTL loads with ±6 mA output drive at 5 V. |
| 16 | 7Q | tri_state | Latch 7 3-state true output, which follows D input while LE is high and holds the latched level when LE is low, and can drive up to 15 LSTTL loads with ±6 mA output drive at 5 V. |
| 17 | 7D | input | Latch 7 data input, TTL-voltage compatible with input current of 1 μA max, sampled when LE falls. |
| 18 | 8D | input | Latch 8 data input, TTL-voltage compatible with input current of 1 μA max, sampled when LE falls. |
| 19 | 8Q | tri_state | Latch 8 3-state true output, which follows D input while LE is high and holds the latched level when LE is low, and can drive up to 15 LSTTL loads with ±6 mA output drive at 5 V. |
| 20 | VCC | power_in | Positive supply pin; the device operates from 4.5 V to 5.5 V (5 V nominal) and each VCC terminal should be bypassed with a 0.1-μF capacitor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | DIP-20 |
| Category | Logic |
| Pins | 20 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | 4.5 | 5 | 5.5 | V | 4 | |
| High-level input voltage | VIH | 2 | V | VCC = 4.5 V to 5.5 V | 4 | ||
| Low-level input voltage | VIL | 0.8 | V | VCC = 4.5 V to 5.5 V | 4 | ||
| Input voltage | VI | 0 | V | 4 | |||
| Output voltage | VO | 0 | V | 4 | |||
| Input transition rise/fall time | tt | 500 | ns | 4 | |||
| Operating free-air temperature | TA | -40 | 85 | °C | 4 | ||
| Supply voltage range | VCC | -0.5 | 7 | V | 4 | ||
| Input clamp current | IIK | -20 | 20 | mA | VI < 0 or VI > VCC | 4 | |
| Output clamp current | IOK | -20 | 20 | mA | VO < 0 or VO > VCC | 4 | |
| Continuous output current | IO | -35 | 35 | mA | VO = 0 to VCC | 4 | |
| Continuous current through VCC or GND | -70 | 70 | mA | 4 | |||
| Junction temperature | TJ | 150 | °C | 4 | |||
| Storage temperature range | Tstg | -65 | 150 | °C | 4 | ||
| High-level output voltage | VOH | 4.4 | 4.499 | V | VI = VIH or VIL, IOH = -20 mA, VCC = 4.5 V | 5 | |
| High-level output voltage | VOH | 3.84 | 4.3 | V | VI = VIH or VIL, IOH = -6 mA, VCC = 4.5 V | 5 | |
| Low-level output voltage | VOL | 0.001 | 0.1 | V | VI = VIH or VIL, IOL = 20 mA, VCC = 4.5 V | 5 | |
| Low-level output voltage | VOL | 0.17 | 0.33 | V | VI = VIH or VIL, IOL = 6 mA, VCC = 4.5 V | 5 | |
| Input current | II | -1000 | 1000 | nA | VI = VCC or 0, VCC = 5.5 V | 5 | |
| Off-state (high-impedance) output current | IOZ | -5 | 5 | μA | VO = VCC or 0, VCC = 5.5 V | 5 | |
| Supply current | ICC | 8 | 80 | μA | VI = VCC or 0, IO = 0, VCC = 5.5 V | 5 | |
| Supply current increase per input at TTL level | ΔICC | 1.4 | 2.9 | mA | One input at 0.5 V or 2.4 V, other inputs at 0 or VCC, VCC = 5.5 V | 5 | |
| Input capacitance | Ci | 3 | 10 | pF | VCC = 4.5 V to 5.5 V | 5 | |
| Pulse duration, LE high | tw | 25 | ns | VCC = 4.5 V | 5 | ||
| Pulse duration, LE high | tw | 23 | ns | VCC = 5.5 V | 5 | ||
| Setup time, data before LE↓ | tsu | 13 | ns | VCC = 4.5 V | 5 | ||
| Setup time, data before LE↓ | tsu | 12 | ns | VCC = 5.5 V | 5 | ||
| Hold time, data after LE↓ | th | 10 | ns | VCC = 4.5 V | 5 | ||
| Propagation delay, D to Q | tpd | 25 | 44 | ns | CL = 50 pF, VCC = 4.5 V | 5 | |
| Propagation delay, D to Q | tpd | 21 | 40 | ns | CL = 50 pF, VCC = 5.5 V | 5 | |
| Propagation delay, LE to Q | tpd | 28 | 44 | ns | CL = 50 pF, VCC = 4.5 V | 5 | |
| Propagation delay, LE to Q | tpd | 25 | 40 | ns | CL = 50 pF, VCC = 5.5 V | 5 | |
| Enable time, OE to Q | ten | 26 | 44 | ns | CL = 50 pF, VCC = 4.5 V | 5 | |
| Enable time, OE to Q | ten | 23 | 40 | ns | CL = 50 pF, VCC = 5.5 V | 5 | |
| Disable time, OE to Q | tdis | 23 | 44 | ns | CL = 50 pF, VCC = 4.5 V | 5 | |
| Disable time, OE to Q | tdis | 22 | 40 | ns | CL = 50 pF, VCC = 5.5 V | 5 | |
| Transition time, any Q | tt | 10 | 15 | ns | CL = 50 pF, VCC = 4.5 V | 5 | |
| Transition time, any Q | tt | 9 | 14 | ns | CL = 50 pF, VCC = 5.5 V | 5 | |
| Propagation delay, D to Q | tpd | 32 | 65 | ns | CL = 150 pF, VCC = 4.5 V | 6 | |
| Propagation delay, D to Q | tpd | 27 | 59 | ns | CL = 150 pF, VCC = 5.5 V | 6 | |
| Propagation delay, LE to Q | tpd | 38 | 65 | ns | CL = 150 pF, VCC = 4.5 V | 6 | |
| Propagation delay, LE to Q | tpd | 36 | 59 | ns | CL = 150 pF, VCC = 5.5 V | 6 | |
| Enable time, OE to Q | ten | 33 | 65 | ns | CL = 150 pF, VCC = 4.5 V | 6 | |
| Enable time, OE to Q | ten | 28 | 59 | ns | CL = 150 pF, VCC = 5.5 V | 6 | |
| Rise time, any Q | tr | 18 | 53 | ns | CL = 150 pF, VCC = 4.5 V | 6 | |
| Rise time, any Q | tr | 16 | 48 | ns | CL = 150 pF, VCC = 5.5 V | 6 | |
| Junction-to-ambient thermal resistance (N, PDIP) | RθJA | 84.6 | °C/W | N (PDIP) package, 20 pins | 4 | ||
| Junction-to-case (top) thermal resistance (N, PDIP) | RθJC (top) | 72.5 | °C/W | N (PDIP) package, 20 pins | 4 | ||
| Junction-to-board thermal resistance (N, PDIP) | RθJB | 65.3 | °C/W | N (PDIP) package, 20 pins | 4 | ||
| Junction-to-top characterization parameter (N, PDIP) | ΨJT | 55.3 | °C/W | N (PDIP) package, 20 pins | 4 | ||
| Junction-to-board characterization parameter (N, PDIP) | ΨJB | 65.2 | °C/W | N (PDIP) package, 20 pins | 4 |
CAD (KiCad official)
- Symbol:
SN74HCT373N - Footprint:
Package_DIP:DIP-20_W7.62mm - 3D model: DIP-20 (KiCad packages3D, STEP)
- 3D model files:
sn74hct373n-etched.step/sn74hct373n-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn74hct373n.step/sn74hct373n.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (28 pp, sha256
93ce347a788fe0ad, retrieved 2026-11-10, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# SN74HCT373N
**Texas Instruments** · Latches · DIP-20
SN74HCT373N from Texas Instruments, in a DIP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OE | input | Active-low output enable: when OE is low the eight Q outputs are in their normal logic states, and when OE is high all Q outputs are forced to the high-impedance (Z) state without affecting the latches. |
| 2 | 1Q | tri_state | Latch 1 3-state true output, which follows D input while LE is high and holds the latched level when LE is low, and can drive up to 15 LSTTL loads with ±6 mA output drive at 5 V. |
| 3 | 1D | input | Latch 1 data input, TTL-voltage compatible with input current of 1 μA max, sampled when LE falls. |
| 4 | 2D | input | Latch 2 data input, TTL-voltage compatible with input current of 1 μA max, sampled when LE falls. |
| 5 | 2Q | tri_state | Latch 2 3-state true output, which follows D input while LE is high and holds the latched level when LE is low, and can drive up to 15 LSTTL loads with ±6 mA output drive at 5 V. |
| 6 | 3Q | tri_state | Latch 3 3-state true output, which follows D input while LE is high and holds the latched level when LE is low, and can drive up to 15 LSTTL loads with ±6 mA output drive at 5 V. |
| 7 | 3D | input | Latch 3 data input, TTL-voltage compatible with input current of 1 μA max, sampled when LE falls. |
| 8 | 4D | input | Latch 4 data input, TTL-voltage compatible with input current of 1 μA max, sampled when LE falls. |
| 9 | 4Q | tri_state | Latch 4 3-state true output, which follows D input while LE is high and holds the latched level when LE is low, and can drive up to 15 LSTTL loads with ±6 mA output drive at 5 V. |
| 10 | GND | power_in | Ground reference pin for the device. |
| 11 | LE | input | Latch-enable input: while high the Q outputs follow the D inputs, and when taken low the Q outputs are latched at the levels set up at the D inputs. |
| 12 | 5Q | tri_state | Latch 5 3-state true output, which follows D input while LE is high and holds the latched level when LE is low, and can drive up to 15 LSTTL loads with ±6 mA output drive at 5 V. |
| 13 | 5D | input | Latch 5 data input, TTL-voltage compatible with input current of 1 μA max, sampled when LE falls. |
| 14 | 6D | input | Latch 6 data input, TTL-voltage compatible with input current of 1 μA max, sampled when LE falls. |
| 15 | 6Q | tri_state | Latch 6 3-state true output, which follows D input while LE is high and holds the latched level when LE is low, and can drive up to 15 LSTTL loads with ±6 mA output drive at 5 V. |
| 16 | 7Q | tri_state | Latch 7 3-state true output, which follows D input while LE is high and holds the latched level when LE is low, and can drive up to 15 LSTTL loads with ±6 mA output drive at 5 V. |
| 17 | 7D | input | Latch 7 data input, TTL-voltage compatible with input current of 1 μA max, sampled when LE falls. |
| 18 | 8D | input | Latch 8 data input, TTL-voltage compatible with input current of 1 μA max, sampled when LE falls. |
| 19 | 8Q | tri_state | Latch 8 3-state true output, which follows D input while LE is high and holds the latched level when LE is low, and can drive up to 15 LSTTL loads with ±6 mA output drive at 5 V. |
| 20 | VCC | power_in | Positive supply pin; the device operates from 4.5 V to 5.5 V (5 V nominal) and each VCC terminal should be bypassed with a 0.1-μF capacitor. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | DIP-20 |
| Category | Logic |
| Pins | 20 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | 4.5 | 5 | 5.5 | V | | 4 |
| High-level input voltage | VIH | 2 | | | V | VCC = 4.5 V to 5.5 V | 4 |
| Low-level input voltage | VIL | | | 0.8 | V | VCC = 4.5 V to 5.5 V | 4 |
| Input voltage | VI | 0 | | | V | | 4 |
| Output voltage | VO | 0 | | | V | | 4 |
| Input transition rise/fall time | tt | | | 500 | ns | | 4 |
| Operating free-air temperature | TA | -40 | | 85 | °C | | 4 |
| Supply voltage range | VCC | -0.5 | | 7 | V | | 4 |
| Input clamp current | IIK | -20 | | 20 | mA | VI < 0 or VI > VCC | 4 |
| Output clamp current | IOK | -20 | | 20 | mA | VO < 0 or VO > VCC | 4 |
| Continuous output current | IO | -35 | | 35 | mA | VO = 0 to VCC | 4 |
| Continuous current through VCC or GND | | -70 | | 70 | mA | | 4 |
| Junction temperature | TJ | | | 150 | °C | | 4 |
| Storage temperature range | Tstg | -65 | | 150 | °C | | 4 |
| High-level output voltage | VOH | 4.4 | 4.499 | | V | VI = VIH or VIL, IOH = -20 mA, VCC = 4.5 V | 5 |
| High-level output voltage | VOH | 3.84 | 4.3 | | V | VI = VIH or VIL, IOH = -6 mA, VCC = 4.5 V | 5 |
| Low-level output voltage | VOL | | 0.001 | 0.1 | V | VI = VIH or VIL, IOL = 20 mA, VCC = 4.5 V | 5 |
| Low-level output voltage | VOL | | 0.17 | 0.33 | V | VI = VIH or VIL, IOL = 6 mA, VCC = 4.5 V | 5 |
| Input current | II | -1000 | | 1000 | nA | VI = VCC or 0, VCC = 5.5 V | 5 |
| Off-state (high-impedance) output current | IOZ | -5 | | 5 | μA | VO = VCC or 0, VCC = 5.5 V | 5 |
| Supply current | ICC | | 8 | 80 | μA | VI = VCC or 0, IO = 0, VCC = 5.5 V | 5 |
| Supply current increase per input at TTL level | ΔICC | | 1.4 | 2.9 | mA | One input at 0.5 V or 2.4 V, other inputs at 0 or VCC, VCC = 5.5 V | 5 |
| Input capacitance | Ci | | 3 | 10 | pF | VCC = 4.5 V to 5.5 V | 5 |
| Pulse duration, LE high | tw | 25 | | | ns | VCC = 4.5 V | 5 |
| Pulse duration, LE high | tw | 23 | | | ns | VCC = 5.5 V | 5 |
| Setup time, data before LE↓ | tsu | 13 | | | ns | VCC = 4.5 V | 5 |
| Setup time, data before LE↓ | tsu | 12 | | | ns | VCC = 5.5 V | 5 |
| Hold time, data after LE↓ | th | 10 | | | ns | VCC = 4.5 V | 5 |
| Propagation delay, D to Q | tpd | | 25 | 44 | ns | CL = 50 pF, VCC = 4.5 V | 5 |
| Propagation delay, D to Q | tpd | | 21 | 40 | ns | CL = 50 pF, VCC = 5.5 V | 5 |
| Propagation delay, LE to Q | tpd | | 28 | 44 | ns | CL = 50 pF, VCC = 4.5 V | 5 |
| Propagation delay, LE to Q | tpd | | 25 | 40 | ns | CL = 50 pF, VCC = 5.5 V | 5 |
| Enable time, OE to Q | ten | | 26 | 44 | ns | CL = 50 pF, VCC = 4.5 V | 5 |
| Enable time, OE to Q | ten | | 23 | 40 | ns | CL = 50 pF, VCC = 5.5 V | 5 |
| Disable time, OE to Q | tdis | | 23 | 44 | ns | CL = 50 pF, VCC = 4.5 V | 5 |
| Disable time, OE to Q | tdis | | 22 | 40 | ns | CL = 50 pF, VCC = 5.5 V | 5 |
| Transition time, any Q | tt | | 10 | 15 | ns | CL = 50 pF, VCC = 4.5 V | 5 |
| Transition time, any Q | tt | | 9 | 14 | ns | CL = 50 pF, VCC = 5.5 V | 5 |
| Propagation delay, D to Q | tpd | | 32 | 65 | ns | CL = 150 pF, VCC = 4.5 V | 6 |
| Propagation delay, D to Q | tpd | | 27 | 59 | ns | CL = 150 pF, VCC = 5.5 V | 6 |
| Propagation delay, LE to Q | tpd | | 38 | 65 | ns | CL = 150 pF, VCC = 4.5 V | 6 |
| Propagation delay, LE to Q | tpd | | 36 | 59 | ns | CL = 150 pF, VCC = 5.5 V | 6 |
| Enable time, OE to Q | ten | | 33 | 65 | ns | CL = 150 pF, VCC = 4.5 V | 6 |
| Enable time, OE to Q | ten | | 28 | 59 | ns | CL = 150 pF, VCC = 5.5 V | 6 |
| Rise time, any Q | tr | | 18 | 53 | ns | CL = 150 pF, VCC = 4.5 V | 6 |
| Rise time, any Q | tr | | 16 | 48 | ns | CL = 150 pF, VCC = 5.5 V | 6 |
| Junction-to-ambient thermal resistance (N, PDIP) | RθJA | | 84.6 | | °C/W | N (PDIP) package, 20 pins | 4 |
| Junction-to-case (top) thermal resistance (N, PDIP) | RθJC (top) | | 72.5 | | °C/W | N (PDIP) package, 20 pins | 4 |
| Junction-to-board thermal resistance (N, PDIP) | RθJB | | 65.3 | | °C/W | N (PDIP) package, 20 pins | 4 |
| Junction-to-top characterization parameter (N, PDIP) | ΨJT | | 55.3 | | °C/W | N (PDIP) package, 20 pins | 4 |
| Junction-to-board characterization parameter (N, PDIP) | ΨJB | | 65.2 | | °C/W | N (PDIP) package, 20 pins | 4 |
## CAD (KiCad official)
- Symbol: `SN74HCT373N`
- Footprint: `Package_DIP:DIP-20_W7.62mm`
- 3D model: DIP-20 (KiCad packages3D, STEP)
- 3D model files: `sn74hct373n-etched.step` / `sn74hct373n-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sn74hct373n.step` / `sn74hct373n.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/sn74hct373.pdf) (28 pp, sha256 `93ce347a788fe0ad`, retrieved 2026-11-10, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/sn74hct373n-datasheet.pdf)