Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

SN74HCS273DGSR

Texas Instruments · Logic · VSSOP-20

SN74HCS273DGSR from Texas Instruments, in a VSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table and the footprint is an Adom_Gen land derived from the manufacturer drawing; the 3D model is generated to fit it.

Pinout

Pin Name Type Function
1 CLR input Clear for all channels, active low.
2 1Q output Output for channel 1.
3 1D input Input for channel 1.
4 2D input Input for channel 2.
5 2Q output Output for channel 2.
6 3Q output Output for channel 3.
7 3D input Input for channel 3.
8 4D input Input for channel 4.
9 4Q output Output for channel 4.
10 GND power_in Ground.
11 CLK input Clock for all channels, rising edge triggered.
12 5Q output Output for channel 5.
13 5D input Input for channel 5.
14 6D input Input for channel 6.
15 6Q output Output for channel 6.
16 7Q output Output for channel 7.
17 7D input Input for channel 7.
18 8D input Input for channel 8.
19 8Q output Output for channel 8.
20 VCC power_in Positive supply; recommended VCC range is 2 V to 6 V (Section 6.3).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VSSOP-20
Category Logic
Pins 20

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage (absolute maximum) VCC -0.5 7 V 4
Input clamp current IIK -20 20 mA VI < 0 or VI > VCC 4
Output clamp current IOK -20 20 mA VO < 0 or VO > VCC 4
Continuous output current IO -35 35 mA VO = 0 to VCC 4
Continuous current through VCC or GND ICC -70 70 mA 4
Junction temperature TJ 150 °C 4
Storage temperature Tstg -65 150 °C 4
Supply voltage (recommended) VCC 2 6 V 4
Input voltage (recommended) VI 0 V max printed as VCC 4
Output voltage (recommended) VO 0 V max printed as VCC 4
Ambient temperature TA -40 125 °C Operating free-air temperature range 4
Supply current ICC 0.1 2 µA VCC = 6 V; VI = VCC or 0, IO = 0 5
Input leakage current II -1000 100 1000 nA VCC = 6 V; VI = VCC or 0 5
Positive switching threshold VT+ 0.7 1.5 V VCC = 2 V 5
Positive switching threshold VT+ 1.7 3.15 V VCC = 4.5 V 5
Positive switching threshold VT+ 2.1 4.2 V VCC = 6 V 5
Negative switching threshold VT- 0.3 1 V VCC = 2 V 5
Negative switching threshold VT- 0.9 2.2 V VCC = 4.5 V 5
Negative switching threshold VT- 1.2 3 V VCC = 6 V 5
Hysteresis (VT+ - VT-) ΔVT 0.2 1 V VCC = 2 V 5
Hysteresis (VT+ - VT-) ΔVT 0.4 1.4 V VCC = 4.5 V 5
Hysteresis (VT+ - VT-) ΔVT 0.6 1.6 V VCC = 6 V 5
High-level output voltage VOH 4 4.3 V VCC = 4.5 V; VI = VIH or VIL; IOH = -6 mA 5
High-level output voltage VOH 5.4 5.75 V VCC = 6 V; VI = VIH or VIL; IOH = -7.8 mA 5
Low-level output voltage VOL 0.002 0.1 V VCC = 2 V to 6 V; VI = VIH or VIL; IOL = 20 µA 5
Low-level output voltage VOL 0.18 0.3 V VCC = 4.5 V; VI = VIH or VIL; IOL = 6 mA 5
Low-level output voltage VOL 0.22 0.33 V VCC = 6 V; VI = VIH or VIL; IOL = 7.8 mA 5
Clock frequency fclock 49 MHz VCC = 2 V; CL = 50 pF 5
Clock frequency fclock 120 MHz VCC = 4.5 V; CL = 50 pF 5
Clock frequency fclock 135 MHz VCC = 6 V; CL = 50 pF 5
Pulse duration, CLR low tw 12 ns VCC = 2 V; CLR low; CL = 50 pF 5
Pulse duration, CLR low tw 6 ns VCC = 4.5 V; CLR low; CL = 50 pF 5
Pulse duration, CLK high or low tw 12 ns VCC = 2 V; CLK high or low; CL = 50 pF 5
Pulse duration, CLK high or low tw 6 ns VCC = 4.5 V; CLK high or low; CL = 50 pF 5
Setup time, data before CLK↑ tsu 18 ns VCC = 2 V; CL = 50 pF 5
Setup time, data before CLK↑ tsu 6 ns VCC = 4.5 V; CL = 50 pF 5
Setup time, CLR inactive tsu 18 ns VCC = 2 V; CLR inactive; CL = 50 pF 5
Setup time, CLR inactive tsu 6 ns VCC = 4.5 V; CLR inactive; CL = 50 pF 5
Hold time, data after CLK↑ th 0 ns VCC = 2 V; CL = 50 pF 5
Disable time, CLR to any Q tdis 27.3 31.2 ns VCC = 2 V; CL = 50 pF 6
Disable time, CLR to any Q tdis 13.3 14.8 ns VCC = 4.5 V; CL = 50 pF 6
Disable time, CLR to any Q tdis 11.7 13.2 ns VCC = 6 V; CL = 50 pF 6
Propagation delay, CLK to any Q tpd 29.1 34.6 ns VCC = 2 V; CL = 50 pF 6
Propagation delay, CLK to any Q tpd 13.9 16.4 ns VCC = 4.5 V; CL = 50 pF 6
Propagation delay, CLK to any Q tpd 12.1 14.3 ns VCC = 6 V; CL = 50 pF 6
Transition time, any Q tt 14.6 19.4 ns VCC = 2 V; CL = 50 pF 6
Transition time, any Q tt 7.7 9.6 ns VCC = 4.5 V; CL = 50 pF 6
Transition time, any Q tt 7.4 10.4 ns VCC = 6 V; CL = 50 pF 6
Junction-to-ambient thermal resistance (DGS VSSOP) RθJA 130.6 °C/W DGS (VSSOP) 20 pins 4
Junction-to-case (top) thermal resistance (DGS VSSOP) RθJC(top) 68.7 °C/W DGS (VSSOP) 20 pins 4
Junction-to-board thermal resistance (DGS VSSOP) RθJB 85.4 °C/W DGS (VSSOP) 20 pins 4
Junction-to-top characterization parameter (DGS VSSOP) ΨJT 10.5 °C/W DGS (VSSOP) 20 pins 4
Junction-to-board characterization parameter (DGS VSSOP) ΨJB 85 °C/W DGS (VSSOP) 20 pins 4

CAD (Adom-generated)

  • Symbol: SN74HCS273DGSR
  • Footprint: Adom_Gen:Texas_Instruments_SN74
  • 3D model: generated to fit the land (STEP)
  • 3D model files: sn74hcs273dgsr-etched.step / sn74hcs273dgsr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sn74hcs273dgsr.step / sn74hcs273dgsr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (30 pp, sha256 8da9f5546c2c749a, retrieved 2026-10-29, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing. 3D model generated to fit that land.

Datasheet PDF