main
Ray
Initial commit: component/sn74hcs238pwr
f5bf321
SN74HCS238PWR
Texas Instruments · Signal Switches, Multiplexers, Decoders · TSSOP-16
SN74HCS238PWR from Texas Instruments, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | A0 | input | Address select input 0; 3-to-8 decoder address line with Schmitt-trigger, VI = 0 to VCC V |
| 2 | A1 | input | Address select input 1; 3-to-8 decoder address line with Schmitt-trigger, VI = 0 to VCC V |
| 3 | A2 | input | Address select input 2; 3-to-8 decoder address line with Schmitt-trigger, VI = 0 to VCC V |
| 4 | G0 | input | Strobe input, active-low; all Y outputs forced low when G0 is high, VI = 0 to VCC V |
| 5 | G1 | input | Strobe input, active-low; all Y outputs forced low when G1 is high, VI = 0 to VCC V |
| 6 | G2 | input | Strobe input for output enable; all Y outputs forced low when G2 is low, VI = 0 to VCC V |
| 7 | Y7 | output | Decoder output 7; active high when address selects this output and all strobes enable, VO = 0 to VCC V |
| 8 | GND | power_in | Ground; 0 V reference, continuous current through GND ±70 mA maximum |
| 9 | Y6 | output | Decoder output 6; active high when address selects this output and all strobes enable, VO = 0 to VCC V |
| 10 | Y5 | output | Decoder output 5; active high when address selects this output and all strobes enable, VO = 0 to VCC V |
| 11 | Y4 | output | Decoder output 4; active high when address selects this output and all strobes enable, VO = 0 to VCC V |
| 12 | Y3 | output | Decoder output 3; active high when address selects this output and all strobes enable, VO = 0 to VCC V |
| 13 | Y2 | output | Decoder output 2; active high when address selects this output and all strobes enable, VO = 0 to VCC V |
| 14 | Y1 | output | Decoder output 1; active high when address selects this output and all strobes enable, VO = 0 to VCC V |
| 15 | Y0 | output | Decoder output 0; active high when address selects this output and all strobes enable, VO = 0 to VCC V |
| 16 | VCC | power_out | Positive supply voltage; 2 V to 6 V recommended operating range, continuous current through VCC ±70 mA maximum |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-16 |
| Category | Logic |
| Pins | 16 |
CAD (KiCad official)
- Symbol:
SN74HCS238PWR - Footprint:
Package_SO:TSSOP-16_4.4x5mm_P0.65mm - 3D model: TSSOP-16 (KiCad packages3D, STEP)
- 3D model files:
sn74hcs238pwr-etched.step/sn74hcs238pwr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn74hcs238pwr.step/sn74hcs238pwr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (32 pp, sha256
f2ec3e1cbfe277a0, retrieved 2026-09-24, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# SN74HCS238PWR
**Texas Instruments** · Signal Switches, Multiplexers, Decoders · TSSOP-16
SN74HCS238PWR from Texas Instruments, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | A0 | input | Address select input 0; 3-to-8 decoder address line with Schmitt-trigger, VI = 0 to VCC V |
| 2 | A1 | input | Address select input 1; 3-to-8 decoder address line with Schmitt-trigger, VI = 0 to VCC V |
| 3 | A2 | input | Address select input 2; 3-to-8 decoder address line with Schmitt-trigger, VI = 0 to VCC V |
| 4 | G0 | input | Strobe input, active-low; all Y outputs forced low when G0 is high, VI = 0 to VCC V |
| 5 | G1 | input | Strobe input, active-low; all Y outputs forced low when G1 is high, VI = 0 to VCC V |
| 6 | G2 | input | Strobe input for output enable; all Y outputs forced low when G2 is low, VI = 0 to VCC V |
| 7 | Y7 | output | Decoder output 7; active high when address selects this output and all strobes enable, VO = 0 to VCC V |
| 8 | GND | power_in | Ground; 0 V reference, continuous current through GND ±70 mA maximum |
| 9 | Y6 | output | Decoder output 6; active high when address selects this output and all strobes enable, VO = 0 to VCC V |
| 10 | Y5 | output | Decoder output 5; active high when address selects this output and all strobes enable, VO = 0 to VCC V |
| 11 | Y4 | output | Decoder output 4; active high when address selects this output and all strobes enable, VO = 0 to VCC V |
| 12 | Y3 | output | Decoder output 3; active high when address selects this output and all strobes enable, VO = 0 to VCC V |
| 13 | Y2 | output | Decoder output 2; active high when address selects this output and all strobes enable, VO = 0 to VCC V |
| 14 | Y1 | output | Decoder output 1; active high when address selects this output and all strobes enable, VO = 0 to VCC V |
| 15 | Y0 | output | Decoder output 0; active high when address selects this output and all strobes enable, VO = 0 to VCC V |
| 16 | VCC | power_out | Positive supply voltage; 2 V to 6 V recommended operating range, continuous current through VCC ±70 mA maximum |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-16 |
| Category | Logic |
| Pins | 16 |
## CAD (KiCad official)
- Symbol: `SN74HCS238PWR`
- Footprint: `Package_SO:TSSOP-16_4.4x5mm_P0.65mm`
- 3D model: TSSOP-16 (KiCad packages3D, STEP)
- 3D model files: `sn74hcs238pwr-etched.step` / `sn74hcs238pwr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sn74hcs238pwr.step` / `sn74hcs238pwr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/sn74hcs238.pdf) (32 pp, sha256 `f2ec3e1cbfe277a0`, retrieved 2026-09-24, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/sn74hcs238pwr-datasheet.pdf)