component
SN74HCS137QDRQ1
Public Made by Adomby adom
Texas Instruments Signal Switches, Multiplexers, Decoders, SOIC-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownSN74HCS137QDRQ1
Texas Instruments · Signal Switches, Multiplexers, Decoders · SOIC-16
SN74HCS137QDRQ1 from Texas Instruments, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | A0 | input | Address select 0 input (Schmitt-trigger); with LE low it selects one of the eight outputs, and with LE high its value is latched and ignored. |
| 2 | A1 | input | Address select 1 input (Schmitt-trigger); with LE low it selects one of the eight outputs, and with LE high its value is latched and ignored. |
| 3 | A2 | input | Address select 2 input (Schmitt-trigger); with LE low it selects one of the eight outputs, and with LE high its value is latched and ignored. |
| 4 | LE | input | Active-low latch enable; when LE is low the device acts as a normal one-of-eight decoder, and when LE is high the address latches hold their previous states regardless of address changes. |
| 5 | G1 | input | Active-low strobe input 1; when any strobe is active all outputs are forced high, and it can serve as the data input for demultiplexing. |
| 6 | G0 | input | Strobe input 0; when this strobe is active all outputs are forced high, and it can serve as the data input for demultiplexing. |
| 7 | Y7 | output | Decoder output 7, normally high and low only when selected; balanced CMOS push-pull output that may be left disconnected if unused. |
| 8 | GND | power_in | Ground reference pin for the device. |
| 9 | Y6 | output | Decoder output 6, normally high and low only when selected; balanced CMOS push-pull output that may be left disconnected if unused. |
| 10 | Y5 | output | Decoder output 5, normally high and low only when selected; balanced CMOS push-pull output that may be left disconnected if unused. |
| 11 | Y4 | output | Decoder output 4, normally high and low only when selected; balanced CMOS push-pull output that may be left disconnected if unused. |
| 12 | Y3 | output | Decoder output 3, normally high and low only when selected; balanced CMOS push-pull output that may be left disconnected if unused. |
| 13 | Y2 | output | Decoder output 2, normally high and low only when selected; balanced CMOS push-pull output that may be left disconnected if unused. |
| 14 | Y1 | output | Decoder output 1, normally high and low only when selected; balanced CMOS push-pull output that may be left disconnected if unused. |
| 15 | Y0 | output | Decoder output 0, normally high and low only when selected; balanced CMOS push-pull output that may be left disconnected if unused. |
| 16 | VCC | power_in | Positive supply; the recommended supply voltage range is 2 V to 6 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-16 |
| Category | Logic |
| Pins | 16 |
CAD (KiCad official)
- Symbol:
SN74HCS137QDRQ1 - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOIC-16 (KiCad packages3D, STEP)
- 3D model files:
sn74hcs137qdrq1-etched.step/sn74hcs137qdrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn74hcs137qdrq1.step/sn74hcs137qdrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (26 pp, sha256
1f54f5f2f2c675e1, retrieved 2026-10-07, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).