SN74HCS05QDRQ1

{
  "slug": "sn74hcs05qdrq1",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Inverters, SOIC-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "logic",
    "sn74hcs05qdrq1",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "sn74hcs05qdrq1.kicad_sym",
    "sn74hcs05qdrq1.kicad_mod",
    "sn74hcs05qdrq1.glb",
    "sn74hcs05qdrq1.step",
    "sn74hcs05qdrq1.lbr",
    "docs/hero.png",
    "docs/sn74hcs05qdrq1-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "sn74hcs05qdrq1-hero.glb",
    "sn74hcs05qdrq1-hero.overlay.json"
  ],
  "component": {
    "mpn": "SN74HCS05QDRQ1",
    "manufacturer": "Texas Instruments",
    "package": "SOIC-14",
    "pin_count": 14,
    "category": "Logic",
    "subcategory": "Inverters",
    "datasheet": "https://www.ti.com/cn/lit/gpn/sn74hcs05-q1",
    "parts": {
      "symbol": "sn74hcs05qdrq1.kicad_sym",
      "footprint": "sn74hcs05qdrq1.kicad_mod",
      "model_3d": "sn74hcs05qdrq1-hero.glb",
      "model_3d_plain": "sn74hcs05qdrq1.glb",
      "model_3d_step": "sn74hcs05qdrq1-etched.step",
      "model_3d_step_plain": "sn74hcs05qdrq1.step",
      "lbr": "sn74hcs05qdrq1.lbr"
    },
    "distributor_links": {
      "lcsc": "C2867444",
      "digikey": "296-SN74HCS05QDRQ1TR-ND",
      "mouser": "595-SN74HCS05QDRQ1"
    },
    "distributor_check": {
      "checked_at": "2026-10-11T11:15:28Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-SN74HCS05QDRQ1TR-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-SN74HCS05QDRQ1",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "1A",
        "type": "input",
        "description": "Input A of channel 1 (Schmitt-trigger CMOS input, VCC supply range 2 V to 6 V)."
      },
      {
        "number": "2",
        "name": "1Y",
        "type": "output",
        "description": "Open-drain output Y of channel 1; it can only drive low and is high-impedance when high, so a pull-up resistor is needed to define the high level."
      },
      {
        "number": "3",
        "name": "2A",
        "type": "input",
        "description": "Input A of channel 2 (Schmitt-trigger CMOS input)."
      },
      {
        "number": "4",
        "name": "2Y",
        "type": "output",
        "description": "Open-drain output Y of channel 2; it can only drive low and is high-impedance when high."
      },
      {
        "number": "5",
        "name": "3A",
        "type": "input",
        "description": "Input A of channel 3 (Schmitt-trigger CMOS input)."
      },
      {
        "number": "6",
        "name": "3Y",
        "type": "output",
        "description": "Open-drain output Y of channel 3; it can only drive low and is high-impedance when high."
      },
      {
        "number": "7",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference; the ground must sink the total output current plus the maximum ICC."
      },
      {
        "number": "8",
        "name": "4Y",
        "type": "output",
        "description": "Open-drain output Y of channel 4; it can only drive low and is high-impedance when high."
      },
      {
        "number": "9",
        "name": "4A",
        "type": "input",
        "description": "Input A of channel 4 (Schmitt-trigger CMOS input)."
      },
      {
        "number": "10",
        "name": "5Y",
        "type": "output",
        "description": "Open-drain output Y of channel 5; it can only drive low and is high-impedance when high."
      },
      {
        "number": "11",
        "name": "5A",
        "type": "input",
        "description": "Input A of channel 5 (Schmitt-trigger CMOS input)."
      },
      {
        "number": "12",
        "name": "6Y",
        "type": "output",
        "description": "Open-drain output Y of channel 6; it can only drive low and is high-impedance when high."
      },
      {
        "number": "13",
        "name": "6A",
        "type": "input",
        "description": "Input A of channel 6 (Schmitt-trigger CMOS input)."
      },
      {
        "number": "14",
        "name": "VCC",
        "type": "power_in",
        "description": "Positive supply; the recommended operating range is 2 V to 6 V (absolute maximum 7 V)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pin numbers, names and I/O roles come from the Pin Functions table and Figure 5-1 (PW or D package t; Output pins are open-drain CMOS outputs per the Feature Description on page 8; the pin-table page on; The output and input descriptions are short because the pin-function table gives little detail. Oper"
        ],
        "pages_sent": 24,
        "cost_usd": 0.0822,
        "at": "2026-10-11T11:15:11"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/sn74hcs05-q1",
        "pages": 24,
        "sha256": "acd8db5c68e97b7a",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 14,
        "described": 14,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "sn74hcs05qdrq1.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          8.7,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "3b9a775da256c8afcc28dcddfbc2eb3f266107fe61ce8446d96f2c52b6f44a70",
        "checked": "2026-10-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "sn74hcs05qdrq1-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          8.7,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "4db69d01f13e660ff47c59342e8ac226d7188271f34b9a244828668f8fc96089",
        "checked": "2026-10-19",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}