Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

SN74HC595N

Texas Instruments · Shift Registers · DIP-16

SN74HC595N from Texas Instruments, in a DIP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 QB tri_state Output bit B of 8-bit shift register; tri-state output with ±6mA drive capability at 5V.
2 QC tri_state Output bit C of 8-bit shift register; tri-state output with ±6mA drive capability at 5V.
3 QD tri_state Output bit D of 8-bit shift register; tri-state output with ±6mA drive capability at 5V.
4 QE tri_state Output bit E of 8-bit shift register; tri-state output with ±6mA drive capability at 5V.
5 QF tri_state Output bit F of 8-bit shift register; tri-state output with ±6mA drive capability at 5V.
6 QG tri_state Output bit G of 8-bit shift register; tri-state output with ±6mA drive capability at 5V.
7 QH tri_state Output bit H of 8-bit shift register; tri-state output with ±6mA drive capability at 5V.
8 GND power_in Ground reference; power return and signal ground.
9 QH' tri_state Serial output from shift register; tri-state output for cascading multiple 74HC595 devices.
10 SRCLR input Shift register clear input (active low); immediately clears all bits when held low.
11 SRCLK input Shift register clock input (positive edge triggered); shifts data from SER into the first stage on rising edge.
12 RCLK input Storage register clock input (positive edge triggered); transfers shift register data to output register on rising edge.
13 OE input Output enable input (active low); places all outputs into high-impedance when held high.
14 SER input Serial data input; data is shifted into the first stage of shift register on SRCLK rising edge.
15 QA tri_state Output bit A of 8-bit shift register; tri-state output with ±6mA drive capability at 5V.
16 VCC power_in Positive power supply; device operates from 2V to 6V with typical ICC of 80μA maximum.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package DIP-16
Category Logic
Pins 16

CAD (KiCad official)

  • Symbol: SN74HC595N
  • Footprint: Package_DIP:DIP-16_W7.62mm
  • 3D model: DIP-16 (KiCad packages3D, STEP)
  • 3D model files: sn74hc595n-etched.step / sn74hc595n-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sn74hc595n.step / sn74hc595n.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (42 pp, sha256 4862b39a3fdde756, retrieved 2026-09-24, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF