main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs sn74hc574n: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers sn74hc574n: viewers · Ray
package.json sn74hc574n: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json sn74hc574n: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md Initial commit: component/sn74hc574n · Ray
sn74hc574n-etched.fit.json sn74hc574n: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
sn74hc574n-etched.glb sn74hc574n: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
sn74hc574n-etched.step sn74hc574n: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
sn74hc574n.glb Publish 0.1.0 · Ray
sn74hc574n.kicad_mod Publish 0.1.0 · Ray
sn74hc574n.kicad_sym Publish 0.1.0 · Ray
sn74hc574n.lbr Publish 0.1.0 · Ray
sn74hc574n.step Publish 0.1.0 · Ray

SN74HC574N

Texas Instruments · Flip Flops · DIP-20

SN74HC574N from Texas Instruments, in a DIP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OE input Active-low buffered output-enable input; when low the eight Q outputs reflect the stored data, when high the outputs are forced to the high-impedance state without affecting internal flip-flop operation.
2 1D input Data input to flip-flop 1, latched into the flip-flop on the low-to-high transition of CLK.
3 2D input Data input to flip-flop 2, latched into the flip-flop on the low-to-high transition of CLK.
4 3D input Data input to flip-flop 3, latched into the flip-flop on the low-to-high transition of CLK.
5 4D input Data input to flip-flop 4, latched into the flip-flop on the low-to-high transition of CLK.
6 5D input Data input to flip-flop 5, latched into the flip-flop on the low-to-high transition of CLK.
7 6D input Data input to flip-flop 6, latched into the flip-flop on the low-to-high transition of CLK.
8 7D input Data input to flip-flop 7, latched into the flip-flop on the low-to-high transition of CLK.
9 8D input Data input to flip-flop 8, latched into the flip-flop on the low-to-high transition of CLK.
10 GND power_in Ground (0 V) supply reference for the device.
11 CLK input Clock input common to all eight flip-flops; data on the D inputs is entered on the low-to-high (rising-edge) transition of this pin.
12 8Q tri_state Three-state output of flip-flop 8, capable of ±6 mA drive at VCC = 5 V and high-impedance when OE is high.
13 7Q tri_state Three-state output of flip-flop 7, capable of ±6 mA drive at VCC = 5 V and high-impedance when OE is high.
14 6Q tri_state Three-state output of flip-flop 6, capable of ±6 mA drive at VCC = 5 V and high-impedance when OE is high.
15 5Q tri_state Three-state output of flip-flop 5, capable of ±6 mA drive at VCC = 5 V and high-impedance when OE is high.
16 4Q tri_state Three-state output of flip-flop 4, capable of ±6 mA drive at VCC = 5 V and high-impedance when OE is high.
17 3Q tri_state Three-state output of flip-flop 3, capable of ±6 mA drive at VCC = 5 V and high-impedance when OE is high.
18 2Q tri_state Three-state output of flip-flop 2, capable of ±6 mA drive at VCC = 5 V and high-impedance when OE is high.
19 1Q tri_state Three-state output of flip-flop 1, capable of ±6 mA drive at VCC = 5 V and high-impedance when OE is high.
20 VCC power_in Positive supply voltage input, recommended operating range 2 V to 6 V (absolute maximum -0.5 V to 7 V).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package DIP-20
Category Logic
Pins 20

CAD (KiCad official)

  • Symbol: SN74HC574N
  • Footprint: Package_DIP:DIP-20_W7.62mm
  • 3D model: DIP-20 (KiCad packages3D, STEP)
  • 3D model files: sn74hc574n-etched.step / sn74hc574n-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sn74hc574n.step / sn74hc574n.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (31 pp, sha256 fbd2028a87b8d5b8, retrieved 2026-09-24, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-sonnet-5 (text+vision), consensus claude-opus-4-8 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF