← Commit history

Initial commit: component/sn74hc573nsr

Ray ·435b5872e3 ·
2 files changed +270
README.mdadded+57
@@ -0,0 +1,57 @@+# SN74HC573NSR++**lingxingic** · Latches · SOIC-20-208mil++SN74HC573NSR from lingxingic, in a SOIC-20-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | OE | input | Three-state output enable input, active low; high level disables outputs to high-impedance state |+| 2 | D0 | input | Data input bit 0; latched on LE falling edge when setup and hold times are met |+| 3 | D1 | input | Data input bit 1; latched on LE falling edge when setup and hold times are met |+| 4 | D2 | input | Data input bit 2; latched on LE falling edge when setup and hold times are met |+| 5 | D3 | input | Data input bit 3; latched on LE falling edge when setup and hold times are met |+| 6 | D4 | input | Data input bit 4; latched on LE falling edge when setup and hold times are met |+| 7 | D5 | input | Data input bit 5; latched on LE falling edge when setup and hold times are met |+| 8 | D6 | input | Data input bit 6; latched on LE falling edge when setup and hold times are met |+| 9 | D7 | input | Data input bit 7; latched on LE falling edge when setup and hold times are met |+| 10 | GND | power_in | Ground reference (0V) |+| 11 | LE | input | Latch enable input, active high; when high latches are transparent (Qn=Dn), when low data is stored |+| 12 | Q7 | tri_state | Three-state output bit 7; reflects latched D7 when OE is low, high-impedance when OE is high |+| 13 | Q6 | tri_state | Three-state output bit 6; reflects latched D6 when OE is low, high-impedance when OE is high |+| 14 | Q5 | tri_state | Three-state output bit 5; reflects latched D5 when OE is low, high-impedance when OE is high |+| 15 | Q4 | tri_state | Three-state output bit 4; reflects latched D4 when OE is low, high-impedance when OE is high |+| 16 | Q3 | tri_state | Three-state output bit 3; reflects latched D3 when OE is low, high-impedance when OE is high |+| 17 | Q2 | tri_state | Three-state output bit 2; reflects latched D2 when OE is low, high-impedance when OE is high |+| 18 | Q1 | tri_state | Three-state output bit 1; reflects latched D1 when OE is low, high-impedance when OE is high |+| 19 | Q0 | tri_state | Three-state output bit 0; reflects latched D0 when OE is low, high-impedance when OE is high |+| 20 | VCC | power_in | Power supply voltage; recommended range 2.0V to 6.0V for HC variant, 4.5V to 5.5V for HCT variant |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | lingxingic |+| Package | SOIC-20-208mil |+| Category | Logic |+| Pins | 20 |++## CAD (KiCad official)++- Symbol: `SN74HC573NSR`+- Footprint: `Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm`+- 3D model: SOIC-20-208mil (KiCad packages3D, STEP)+- 3D model files: `sn74hc573nsr-etched.step` / `sn74hc573nsr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sn74hc573nsr.step` / `sn74hc573nsr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [lingxingic datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590923056418811904) (21 pp, sha256 `1e9be54d60bf08ab`, retrieved 2026-09-21, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/sn74hc573nsr-datasheet.pdf)
page.jsonadded+213
@@ -0,0 +1,213 @@+{+  "slug": "sn74hc573nsr",+  "version": "0.1.0",+  "type": "component",+  "description": "lingxingic Latches, SOIC-20-208mil. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "logic",+    "sn74hc573nsr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "sn74hc573nsr.kicad_sym",+    "sn74hc573nsr.kicad_mod",+    "sn74hc573nsr.glb",+    "sn74hc573nsr.step",+    "sn74hc573nsr.lbr",+    "docs/hero.png",+    "docs/sn74hc573nsr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "SN74HC573NSR",+    "manufacturer": "lingxingic",+    "package": "SOIC-20-208mil",+    "pin_count": 20,+    "category": "Logic",+    "subcategory": "Latches",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590923056418811904",+    "parts": {+      "symbol": "sn74hc573nsr.kicad_sym",+      "footprint": "sn74hc573nsr.kicad_mod",+      "model_3d": "sn74hc573nsr-etched.glb",+      "model_3d_plain": "sn74hc573nsr.glb",+      "model_3d_step": "sn74hc573nsr-etched.step",+      "model_3d_step_plain": "sn74hc573nsr.step",+      "lbr": "sn74hc573nsr.lbr"+    },+    "distributor_links": {+      "lcsc": "C22374073"+    },+    "pins": [+      {+        "number": "1",+        "name": "OE",+        "type": "input",+        "description": "Three-state output enable input, active low; high level disables outputs to high-impedance state"+      },+      {+        "number": "2",+        "name": "D0",+        "type": "input",+        "description": "Data input bit 0; latched on LE falling edge when setup and hold times are met"+      },+      {+        "number": "3",+        "name": "D1",+        "type": "input",+        "description": "Data input bit 1; latched on LE falling edge when setup and hold times are met"+      },+      {+        "number": "4",+        "name": "D2",+        "type": "input",+        "description": "Data input bit 2; latched on LE falling edge when setup and hold times are met"+      },+      {+        "number": "5",+        "name": "D3",+        "type": "input",+        "description": "Data input bit 3; latched on LE falling edge when setup and hold times are met"+      },+      {+        "number": "6",+        "name": "D4",+        "type": "input",+        "description": "Data input bit 4; latched on LE falling edge when setup and hold times are met"+      },+      {+        "number": "7",+        "name": "D5",+        "type": "input",+        "description": "Data input bit 5; latched on LE falling edge when setup and hold times are met"+      },+      {+        "number": "8",+        "name": "D6",+        "type": "input",+        "description": "Data input bit 6; latched on LE falling edge when setup and hold times are met"+      },+      {+        "number": "9",+        "name": "D7",+        "type": "input",+        "description": "Data input bit 7; latched on LE falling edge when setup and hold times are met"+      },+      {+        "number": "10",+        "name": "GND",+        "type": "power_in",+        "description": "Ground reference (0V)"+      },+      {+        "number": "11",+        "name": "LE",+        "type": "input",+        "description": "Latch enable input, active high; when high latches are transparent (Qn=Dn), when low data is stored"+      },+      {+        "number": "12",+        "name": "Q7",+        "type": "tri_state",+        "description": "Three-state output bit 7; reflects latched D7 when OE is low, high-impedance when OE is high"+      },+      {+        "number": "13",+        "name": "Q6",+        "type": "tri_state",+        "description": "Three-state output bit 6; reflects latched D6 when OE is low, high-impedance when OE is high"+      },+      {+        "number": "14",+        "name": "Q5",+        "type": "tri_state",+        "description": "Three-state output bit 5; reflects latched D5 when OE is low, high-impedance when OE is high"+      },+      {+        "number": "15",+        "name": "Q4",+        "type": "tri_state",+        "description": "Three-state output bit 4; reflects latched D4 when OE is low, high-impedance when OE is high"+      },+      {+        "number": "16",+        "name": "Q3",+        "type": "tri_state",+        "description": "Three-state output bit 3; reflects latched D3 when OE is low, high-impedance when OE is high"+      },+      {+        "number": "17",+        "name": "Q2",+        "type": "tri_state",+        "description": "Three-state output bit 2; reflects latched D2 when OE is low, high-impedance when OE is high"+      },+      {+        "number": "18",+        "name": "Q1",+        "type": "tri_state",+        "description": "Three-state output bit 1; reflects latched D1 when OE is low, high-impedance when OE is high"+      },+      {+        "number": "19",+        "name": "Q0",+        "type": "tri_state",+        "description": "Three-state output bit 0; reflects latched D0 when OE is low, high-impedance when OE is high"+      },+      {+        "number": "20",+        "name": "VCC",+        "type": "power_in",+        "description": "Power supply voltage; recommended range 2.0V to 6.0V for HC variant, 4.5V to 5.5V for HCT variant"+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [],+        "pages_sent": 21,+        "cost_usd": 0.2424,+        "at": "2026-09-21T23:48:41"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590923056418811904",+        "pages": 21,+        "sha256": "1e9be54d60bf08ab",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 20,+        "described": 20,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file