main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers sn74hc540dr: viewers · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
sn74hc540dr-etched.glb Publish 0.1.0 · Ray
sn74hc540dr-etched.step sn74hc540dr: factory component page (tier=lcsc) · Ray
sn74hc540dr-hero.glb sn74hc540dr: hero GLB from the etched model (keeps the MPN mark) · Ray
sn74hc540dr-hero.overlay.json Publish 0.1.0 · Ray
sn74hc540dr.glb Publish 0.1.0 · Ray
sn74hc540dr.kicad_mod Publish 0.1.0 · Ray
sn74hc540dr.kicad_sym Publish 0.1.0 · Ray
sn74hc540dr.lbr Publish 0.1.0 · Ray
sn74hc540dr.step Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 20 pins · Ray

SN74HC540DR

lingxingic · Buffers, Drivers, Receivers, Transceivers · SOP-20

SN74HC540DR from lingxingic, in a SOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OE1 input Output enable 1 input, active low; when it is low (together with OE2 low) the Y outputs are enabled, and a high level forces the outputs to high impedance.
2 A0 input Data input A0 of the inverting 8-bit buffer/line driver; input clamp diodes allow voltages above VCC through a series current-limiting resistor.
3 A1 input Data input A1 of the inverting 8-bit buffer/line driver; input clamp diodes allow voltages above VCC through a series current-limiting resistor.
4 A2 input Data input A2 of the inverting 8-bit buffer/line driver; input clamp diodes allow voltages above VCC through a series current-limiting resistor.
5 A3 input Data input A3 of the inverting 8-bit buffer/line driver; input clamp diodes allow voltages above VCC through a series current-limiting resistor.
6 A4 input Data input A4 of the inverting 8-bit buffer/line driver; input clamp diodes allow voltages above VCC through a series current-limiting resistor.
7 A5 input Data input A5 of the inverting 8-bit buffer/line driver; input clamp diodes allow voltages above VCC through a series current-limiting resistor.
8 A6 input Data input A6 of the inverting 8-bit buffer/line driver; input clamp diodes allow voltages above VCC through a series current-limiting resistor.
9 A7 input Data input A7 of the inverting 8-bit buffer/line driver; input clamp diodes allow voltages above VCC through a series current-limiting resistor.
10 GND power_in Ground reference (0 V) for the device.
11 Y7 tri_state Inverting three-state data output 7; goes high impedance when the output enables are inactive (OE1 high or OE2 high).
12 Y6 tri_state Inverting three-state data output 6; goes high impedance when the output enables are inactive (OE1 high or OE2 high).
13 Y5 tri_state Inverting three-state data output 5; goes high impedance when the output enables are inactive (OE1 high or OE2 high).
14 Y4 tri_state Inverting three-state data output 4; goes high impedance when the output enables are inactive (OE1 high or OE2 high).
15 Y3 tri_state Inverting three-state data output 3; goes high impedance when the output enables are inactive (OE1 high or OE2 high).
16 Y2 tri_state Inverting three-state data output 2; goes high impedance when the output enables are inactive (OE1 high or OE2 high).
17 Y1 tri_state Inverting three-state data output 1; goes high impedance when the output enables are inactive (OE1 high or OE2 high).
18 Y0 tri_state Inverting three-state data output 0; goes high impedance when the output enables are inactive (OE1 high or OE2 high).
19 OE2 input Output enable 2 input, active low; when it is low (together with OE1 low) the Y outputs are enabled, and a high level forces the outputs to high impedance.
20 VCC power_in Power supply voltage; recommended operating range is 2.0 V to 6.0 V for the SN74HC540 and 4.5 V to 5.5 V for the SN74HCT540.

Key specifications

Parameter Value
Manufacturer lingxingic
Package SOP-20
Category Logic
Pins 20

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC -0.5 7 V 8
Input clamp current IIK -20 20 mA VI<-0.5V 或 VI>VCC+0.5V 8
Output clamp current IOK -20 20 mA VO<-0.5V 或 VO>VCC+0.5V 8
Output current IO -35 35 mA -0.5V<VO<VCC+0.5V 8
Supply current ICC 70 mA 8
Ground current IGND -70 mA 8
Storage temperature Tstg -65 150 ℃ 8
Total power dissipation Ptot 500 mW 8
Soldering temperature TL 260 ℃ 10 s; SOP/TSSOP 8
Supply voltage (HC, CMOS input levels) VCC 2 5 6 V 8
Input voltage VI 0 V max printed as VCC 8
Output voltage VO 0 V max printed as VCC 8
Input rise and fall rate Δt/ΔV 625 ns/V VCC=2.0V 8
Input rise and fall rate Δt/ΔV 1.67 139 ns/V VCC=4.5V 8
Input rise and fall rate Δt/ΔV 83 ns/V VCC=6.0V 8
Operating ambient temperature Tamb -40 125 ℃ 8
High-level input voltage VIH 1.5 V Tamb=-40~125℃; VCC=2.0V 11
High-level input voltage VIH 3.15 V Tamb=-40~125℃; VCC=4.5V 11
High-level input voltage VIH 4.2 V Tamb=-40~125℃; VCC=6.0V 11
Low-level input voltage VIL 0.5 V Tamb=-40~125℃; VCC=2.0V 11
Low-level input voltage VIL 1.35 V Tamb=-40~125℃; VCC=4.5V 11
Low-level input voltage VIL 1.8 V Tamb=-40~125℃; VCC=6.0V 11
High-level output voltage VOH 1.9 V VI=VIH或VIL; IO=-20uA; VCC=2.0V; Tamb=-40~125℃ 11
High-level output voltage VOH 4.4 V VI=VIH或VIL; IO=-20uA; VCC=4.5V; Tamb=-40~125℃ 11
High-level output voltage VOH 5.9 V VI=VIH或VIL; IO=-20uA; VCC=6.0V; Tamb=-40~125℃ 11
High-level output voltage VOH 3.7 V VI=VIH或VIL; IO=-6.0mA; VCC=4.5V; Tamb=-40~125℃ 11
High-level output voltage VOH 5.2 V VI=VIH或VIL; IO=-7.8mA; VCC=6.0V; Tamb=-40~125℃ 11
Low-level output voltage VOL 0.1 V VI=VIH或VIL; IO=20uA; VCC=2.0V; Tamb=-40~125℃ 11
Low-level output voltage VOL 0.4 V VI=VIH或VIL; IO=6.0mA; VCC=4.5V; Tamb=-40~125℃ 11
Input leakage current II -1 1 uA VI=VCC或GND; VCC=6.0V; Tamb=-40~125℃ 11
Off-state output current IOZ -10 10 uA VI=VIH或VIL; VCC=6.0V; VO=VCC或GND; Tamb=-40~125℃ 11
Static supply current ICC 160 uA VI=VCC或GND; IO=0A; VCC=6.0V; Tamb=-40~125℃ 11
Propagation delay An to Yn tpd 150 ns 见图6; VCC=2.0V; CL=50pF; Tamb=-40~125℃ 14
Propagation delay An to Yn tpd 30 ns 见图6; VCC=4.5V; CL=50pF; Tamb=-40~125℃ 14
Propagation delay An to Yn tpd 26 ns 见图6; VCC=6.0V; CL=50pF; Tamb=-40~125℃ 14
Output enable time OEn to Yn ten 240 ns 见图7; VCC=2.0V; CL=50pF; Tamb=-40~125℃ 14
Output enable time OEn to Yn ten 48 ns 见图7; VCC=4.5V; CL=50pF; Tamb=-40~125℃ 14
Output enable time OEn to Yn ten 41 ns 见图7; VCC=6.0V; CL=50pF; Tamb=-40~125℃ 14
Output disable time OEn to Yn tdis 240 ns 见图7; VCC=2.0V; CL=50pF; Tamb=-40~125℃ 14
Output disable time OEn to Yn tdis 48 ns 见图7; VCC=4.5V; CL=50pF; Tamb=-40~125℃ 14
Output disable time OEn to Yn tdis 41 ns 见图7; VCC=6.0V; CL=50pF; Tamb=-40~125℃ 14
Transition time tt 90 ns 见图6; VCC=2.0V; CL=50pF; Tamb=-40~125℃ 14
Transition time tt 18 ns 见图6; VCC=4.5V; CL=50pF; Tamb=-40~125℃ 14
Transition time tt 15 ns 见图6; VCC=6.0V; CL=50pF; Tamb=-40~125℃ 14

CAD (KiCad official)

  • Symbol: SN74HC540DR
  • Footprint: Package_SO:SOP-20_7.5x12.8mm_P1.27mm
  • 3D model: SOP-20, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 2.65 mm nominal SOIC height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
  • 3D model files: sn74hc540dr-etched.step / sn74hc540dr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sn74hc540dr.step / sn74hc540dr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: lingxingic datasheet (20 pp, sha256 fdf2377de0ac18c0, retrieved 2026-11-04, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF