main
Ray
Publish 0.1.0
f5b74a4
SN74HC4852QDRQ1
Texas Instruments · Analog Switches, Multiplexers · SOIC-16
SN74HC4852QDRQ1 from Texas Instruments, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 2Y0 | bidirectional | Channel 0 analog switch terminal of multiplexer 2, connected to 2-COM when INH is low and B,A = L,L. |
| 2 | 2Y2 | bidirectional | Channel 2 analog switch terminal of multiplexer 2, connected to 2-COM when INH is low and B,A = H,L. |
| 3 | 2-COM | bidirectional | Common analog input/output of multiplexer 2, with signal range 0 to VCC. |
| 4 | 2Y3 | bidirectional | Channel 3 analog switch terminal of multiplexer 2, connected to 2-COM when INH is low and B,A = H,H. |
| 5 | 2Y1 | bidirectional | Channel 1 analog switch terminal of multiplexer 2, connected to 2-COM when INH is low and B,A = L,H. |
| 6 | INH | input | Inhibit control input; high turns all channels off (none selected), low enables the channel chosen by A and B. |
| 7 | NC | unconnected | No internal connection. |
| 8 | GND | power_in | Ground pin. |
| 9 | B | input | Channel-select input B (upper select bit) that selects one of four channels in each multiplexer together with A. |
| 10 | A | input | Channel-select input A (lower select bit) that selects one of four channels in each multiplexer together with B. |
| 11 | 1Y3 | bidirectional | Channel 3 analog switch terminal of multiplexer 1, connected to 1-COM when INH is low and B,A = H,H. |
| 12 | 1Y0 | bidirectional | Channel 0 analog switch terminal of multiplexer 1, connected to 1-COM when INH is low and B,A = L,L. |
| 13 | 1-COM | bidirectional | Common analog input/output of multiplexer 1, with signal range 0 to VCC. |
| 14 | 1Y1 | bidirectional | Channel 1 analog switch terminal of multiplexer 1, connected to 1-COM when INH is low and B,A = L,H. |
| 15 | 1Y2 | bidirectional | Channel 2 analog switch terminal of multiplexer 1, connected to 1-COM when INH is low and B,A = H,L. |
| 16 | VCC | power_in | Positive supply pin, recommended operating range 2 V to 6 V (absolute maximum 7 V). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-16 |
| Category | Interface |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage range | VCC | -0.5 | 7 | V | 3 | ||
| Input voltage range | VI | -0.5 | V | max printed as VCC + 0.5 V | 3 | ||
| Switch I/O voltage range | VIO | -0.5 | V | max printed as VCC + 0.5 V; footnote: limited to 5.5 V maximum | 3 | ||
| Input clamp current | IIK | -20 | 20 | mA | VI < 0 or VI > VCC | 3 | |
| I/O diode current | IOK | -20 | 20 | mA | VIO < 0 or VIO > VCC | 3 | |
| Switch through current | IS | -25 | 25 | mA | VIO = 0 to VCC | 3 | |
| Continuous current through VCC or GND | -50 | 50 | mA | 3 | |||
| Storage temperature range | Tstg | -65 | 150 | °C | 3 | ||
| Electrostatic discharge protection | 2000 | V | Human-Body Model (HBM) | 3 | |||
| Supply voltage | VCC | 2 | 6 | V | 3 | ||
| High-level input voltage, control inputs | VIH | 1.5 | V | VCC = 2 V | 3 | ||
| High-level input voltage, control inputs | VIH | 2.1 | V | VCC = 3 V | 3 | ||
| High-level input voltage, control inputs | VIH | 2.3 | V | VCC = 3.3 V | 3 | ||
| High-level input voltage, control inputs | VIH | 3.15 | V | VCC = 4.5 V | 3 | ||
| High-level input voltage, control inputs | VIH | 4.2 | V | VCC = 6 V | 3 | ||
| Low-level input voltage, control inputs | VIL | 0.5 | V | VCC = 2 V | 3 | ||
| Low-level input voltage, control inputs | VIL | 0.9 | V | VCC = 3 V | 3 | ||
| Low-level input voltage, control inputs | VIL | 1 | V | VCC = 3.3 V | 3 | ||
| Low-level input voltage, control inputs | VIL | 1.35 | V | VCC = 4.5 V | 3 | ||
| Low-level input voltage, control inputs | VIL | 1.8 | V | VCC = 6 V | 3 | ||
| Input transition rise or fall rate | Δt/Δv | 1000 | ns | VCC = 2 V | 3 | ||
| Input transition rise or fall rate | Δt/Δv | 800 | ns | VCC = 3 V | 3 | ||
| Input transition rise or fall rate | Δt/Δv | 700 | ns | VCC = 3.3 V | 3 | ||
| Input transition rise or fall rate | Δt/Δv | 500 | ns | VCC = 4.5 V | 3 | ||
| Input transition rise or fall rate | Δt/Δv | 400 | ns | VCC = 6 V | 3 | ||
| Operating free-air temperature | TA | -40 | 125 | °C | 3 | ||
| On-state switch resistance | ron | 500 | 700 | Ω | IS ≤ 2 mA, VI = VCC to GND, VINH = VIL; VCC = 2 V; TA = -40°C to 125°C | 4 | |
| On-state switch resistance | ron | 215 | 360 | Ω | IS ≤ 2 mA, VI = VCC to GND, VINH = VIL; VCC = 3 V; TA = -40°C to 125°C | 4 | |
| On-state switch resistance | ron | 210 | 345 | Ω | IS ≤ 2 mA, VI = VCC to GND, VINH = VIL; VCC = 3.3 V; TA = -40°C to 125°C | 4 | |
| On-state switch resistance | ron | 160 | 270 | Ω | IS ≤ 2 mA, VI = VCC to GND, VINH = VIL; VCC = 4.5 V; TA = -40°C to 125°C | 4 | |
| On-state switch resistance | ron | 150 | 250 | Ω | IS ≤ 2 mA, VI = VCC to GND, VINH = VIL; VCC = 6 V; TA = -40°C to 125°C | 4 | |
| Difference in on-state resistance between switches | Δron | 4 | 26 | Ω | IS ≤ 2 mA, VI = VCC/2, VINH = VIL; VCC = 2 V; TA = -40°C to 125°C | 4 | |
| Difference in on-state resistance between switches | Δron | 2 | 18 | Ω | IS ≤ 2 mA, VI = VCC/2, VINH = VIL; VCC = 3 V; TA = -40°C to 125°C | 4 | |
| Difference in on-state resistance between switches | Δron | 3 | 20 | Ω | IS ≤ 2 mA, VI = VCC/2, VINH = VIL; VCC = 6 V; TA = -40°C to 125°C | 4 | |
| Control input current | II | -1 | 0.1 | 1 | µA | VI = VCC or GND; VCC = 6 V; TA = -40°C to 125°C | 4 |
| Off-state switch leakage current (any one channel) | -1 | 0.1 | 1 | µA | VI = VCC or GND, VINH = VIH (see Figure 6); VCC = 6 V | 4 | |
| Off-state switch leakage current (common channel) | IS(off) | -4 | 0.2 | 4 | µA | VI = VCC or GND, VINH = VIH (see Figure 7); VCC = 6 V | 4 |
| On-state switch leakage current | IS(on) | -1 | 0.1 | 1 | µA | VI = VCC or GND, VINH = VIL (see Figure 8); VCC = 6 V | 4 |
| Supply current | ICC | 2 | 10 | µA | VI = VCC or GND; VCC = 6 V | 4 | |
| Control input capacitance | CIC | 3.5 | 10 | pF | A, B, INH | 4 | |
| Common terminal capacitance, switch off | CIS | 22 | 40 | pF | Switch off | 4 | |
| Switch terminal capacitance, switch off | COS | 6.7 | 15 | pF | Switch off | 4 | |
| Maximum shift of output voltage of enabled analog channel | VΔout | 0.05 | 1 | mV | VCC = 3.3 V; II ≤ 1 mA, RS ≤ 3.9 kΩ; TA = -40°C to 125°C | 4 | |
| Maximum shift of output voltage of enabled analog channel | VΔout | 0.1 | 1 | mV | VCC = 5 V; II ≤ 1 mA, RS ≤ 3.9 kΩ; TA = -40°C to 125°C | 4 | |
| Maximum shift of output voltage of enabled analog channel | VΔout | 0.345 | 5 | mV | VCC = 3.3 V; II ≤ 10 mA, RS ≤ 3.9 kΩ; TA = -40°C to 125°C | 4 | |
| Maximum shift of output voltage of enabled analog channel | VΔout | 0.067 | 5 | mV | VCC = 5 V; II ≤ 10 mA, RS ≤ 3.9 kΩ; TA = -40°C to 125°C | 4 | |
| Maximum shift of output voltage of enabled analog channel | VΔout | 0.05 | 2 | mV | VCC = 3.3 V; II ≤ 1 mA, RS ≤ 20 kΩ; TA = -40°C to 125°C | 4 | |
| Maximum shift of output voltage of enabled analog channel | VΔout | 0.11 | 2 | mV | VCC = 5 V; II ≤ 1 mA, RS ≤ 20 kΩ; TA = -40°C to 125°C | 4 | |
| Maximum shift of output voltage of enabled analog channel | VΔout | 0.05 | 20 | mV | VCC = 3.3 V; II ≤ 10 mA, RS ≤ 20 kΩ; TA = -40°C to 125°C | 4 | |
| Maximum shift of output voltage of enabled analog channel | VΔout | 0.024 | 20 | mV | VCC = 5 V; II ≤ 10 mA, RS ≤ 20 kΩ; TA = -40°C to 125°C | 4 | |
| Propagation delay time, COM or Yn to Yn or COM | tPLH/tPHL | 7 | 19.5 | 35 | ns | VCC = 2 V, CL = 50 pF; TA = -40°C to 125°C | 5 |
| Propagation delay time, channel select to COM or Yn | tPLH/tPHL | 12.8 | 24.5 | 42 | ns | VCC = 2 V, CL = 50 pF; TA = -40°C to 125°C | 5 |
| Enable delay time, INH to COM or Yn | tPZH/tPZL | 12.5 | 23.6 | 57.5 | ns | VCC = 2 V, CL = 50 pF; TA = -40°C to 125°C | 5 |
| Disable delay time, INH to COM or Yn | tPHZ/tPLZ | 34 | 48.4 | 115 | ns | VCC = 2 V, CL = 50 pF; TA = -40°C to 125°C | 5 |
| Propagation delay time, COM or Yn to Yn or COM | tPLH/tPHL | 1.8 | 8 | 13.5 | ns | VCC = 6 V, CL = 50 pF; TA = -40°C to 125°C | 6 |
| Propagation delay time, channel select to COM or Yn | tPLH/tPHL | 2.8 | 9.5 | 17.5 | ns | VCC = 6 V, CL = 50 pF; TA = -40°C to 125°C | 6 |
| Enable delay time, INH to COM or Yn | tPZH/tPZL | 2 | 8.4 | 40 | ns | VCC = 6 V, CL = 50 pF; TA = -40°C to 125°C | 6 |
| Thermal impedance, junction to ambient, D package | θJA | 73 | °C/W | D package | 3 |
CAD (KiCad official)
- Symbol:
SN74HC4852QDRQ1 - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOIC-16 (KiCad packages3D, STEP)
- 3D model files:
sn74hc4852qdrq1-etched.step/sn74hc4852qdrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn74hc4852qdrq1.step/sn74hc4852qdrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (21 pp, sha256
3cbad84c84d2efd1, retrieved 2026-10-27, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# SN74HC4852QDRQ1
**Texas Instruments** · Analog Switches, Multiplexers · SOIC-16
SN74HC4852QDRQ1 from Texas Instruments, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 2Y0 | bidirectional | Channel 0 analog switch terminal of multiplexer 2, connected to 2-COM when INH is low and B,A = L,L. |
| 2 | 2Y2 | bidirectional | Channel 2 analog switch terminal of multiplexer 2, connected to 2-COM when INH is low and B,A = H,L. |
| 3 | 2-COM | bidirectional | Common analog input/output of multiplexer 2, with signal range 0 to VCC. |
| 4 | 2Y3 | bidirectional | Channel 3 analog switch terminal of multiplexer 2, connected to 2-COM when INH is low and B,A = H,H. |
| 5 | 2Y1 | bidirectional | Channel 1 analog switch terminal of multiplexer 2, connected to 2-COM when INH is low and B,A = L,H. |
| 6 | INH | input | Inhibit control input; high turns all channels off (none selected), low enables the channel chosen by A and B. |
| 7 | NC | unconnected | No internal connection. |
| 8 | GND | power_in | Ground pin. |
| 9 | B | input | Channel-select input B (upper select bit) that selects one of four channels in each multiplexer together with A. |
| 10 | A | input | Channel-select input A (lower select bit) that selects one of four channels in each multiplexer together with B. |
| 11 | 1Y3 | bidirectional | Channel 3 analog switch terminal of multiplexer 1, connected to 1-COM when INH is low and B,A = H,H. |
| 12 | 1Y0 | bidirectional | Channel 0 analog switch terminal of multiplexer 1, connected to 1-COM when INH is low and B,A = L,L. |
| 13 | 1-COM | bidirectional | Common analog input/output of multiplexer 1, with signal range 0 to VCC. |
| 14 | 1Y1 | bidirectional | Channel 1 analog switch terminal of multiplexer 1, connected to 1-COM when INH is low and B,A = L,H. |
| 15 | 1Y2 | bidirectional | Channel 2 analog switch terminal of multiplexer 1, connected to 1-COM when INH is low and B,A = H,L. |
| 16 | VCC | power_in | Positive supply pin, recommended operating range 2 V to 6 V (absolute maximum 7 V). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-16 |
| Category | Interface |
| Pins | 16 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage range | VCC | -0.5 | | 7 | V | | 3 |
| Input voltage range | VI | -0.5 | | | V | max printed as VCC + 0.5 V | 3 |
| Switch I/O voltage range | VIO | -0.5 | | | V | max printed as VCC + 0.5 V; footnote: limited to 5.5 V maximum | 3 |
| Input clamp current | IIK | -20 | | 20 | mA | VI < 0 or VI > VCC | 3 |
| I/O diode current | IOK | -20 | | 20 | mA | VIO < 0 or VIO > VCC | 3 |
| Switch through current | IS | -25 | | 25 | mA | VIO = 0 to VCC | 3 |
| Continuous current through VCC or GND | | -50 | | 50 | mA | | 3 |
| Storage temperature range | Tstg | -65 | | 150 | °C | | 3 |
| Electrostatic discharge protection | | | | 2000 | V | Human-Body Model (HBM) | 3 |
| Supply voltage | VCC | 2 | | 6 | V | | 3 |
| High-level input voltage, control inputs | VIH | 1.5 | | | V | VCC = 2 V | 3 |
| High-level input voltage, control inputs | VIH | 2.1 | | | V | VCC = 3 V | 3 |
| High-level input voltage, control inputs | VIH | 2.3 | | | V | VCC = 3.3 V | 3 |
| High-level input voltage, control inputs | VIH | 3.15 | | | V | VCC = 4.5 V | 3 |
| High-level input voltage, control inputs | VIH | 4.2 | | | V | VCC = 6 V | 3 |
| Low-level input voltage, control inputs | VIL | | | 0.5 | V | VCC = 2 V | 3 |
| Low-level input voltage, control inputs | VIL | | | 0.9 | V | VCC = 3 V | 3 |
| Low-level input voltage, control inputs | VIL | | | 1 | V | VCC = 3.3 V | 3 |
| Low-level input voltage, control inputs | VIL | | | 1.35 | V | VCC = 4.5 V | 3 |
| Low-level input voltage, control inputs | VIL | | | 1.8 | V | VCC = 6 V | 3 |
| Input transition rise or fall rate | Δt/Δv | | | 1000 | ns | VCC = 2 V | 3 |
| Input transition rise or fall rate | Δt/Δv | | | 800 | ns | VCC = 3 V | 3 |
| Input transition rise or fall rate | Δt/Δv | | | 700 | ns | VCC = 3.3 V | 3 |
| Input transition rise or fall rate | Δt/Δv | | | 500 | ns | VCC = 4.5 V | 3 |
| Input transition rise or fall rate | Δt/Δv | | | 400 | ns | VCC = 6 V | 3 |
| Operating free-air temperature | TA | -40 | | 125 | °C | | 3 |
| On-state switch resistance | ron | | 500 | 700 | Ω | IS ≤ 2 mA, VI = VCC to GND, VINH = VIL; VCC = 2 V; TA = -40°C to 125°C | 4 |
| On-state switch resistance | ron | | 215 | 360 | Ω | IS ≤ 2 mA, VI = VCC to GND, VINH = VIL; VCC = 3 V; TA = -40°C to 125°C | 4 |
| On-state switch resistance | ron | | 210 | 345 | Ω | IS ≤ 2 mA, VI = VCC to GND, VINH = VIL; VCC = 3.3 V; TA = -40°C to 125°C | 4 |
| On-state switch resistance | ron | | 160 | 270 | Ω | IS ≤ 2 mA, VI = VCC to GND, VINH = VIL; VCC = 4.5 V; TA = -40°C to 125°C | 4 |
| On-state switch resistance | ron | | 150 | 250 | Ω | IS ≤ 2 mA, VI = VCC to GND, VINH = VIL; VCC = 6 V; TA = -40°C to 125°C | 4 |
| Difference in on-state resistance between switches | Δron | | 4 | 26 | Ω | IS ≤ 2 mA, VI = VCC/2, VINH = VIL; VCC = 2 V; TA = -40°C to 125°C | 4 |
| Difference in on-state resistance between switches | Δron | | 2 | 18 | Ω | IS ≤ 2 mA, VI = VCC/2, VINH = VIL; VCC = 3 V; TA = -40°C to 125°C | 4 |
| Difference in on-state resistance between switches | Δron | | 3 | 20 | Ω | IS ≤ 2 mA, VI = VCC/2, VINH = VIL; VCC = 6 V; TA = -40°C to 125°C | 4 |
| Control input current | II | -1 | 0.1 | 1 | µA | VI = VCC or GND; VCC = 6 V; TA = -40°C to 125°C | 4 |
| Off-state switch leakage current (any one channel) | | -1 | 0.1 | 1 | µA | VI = VCC or GND, VINH = VIH (see Figure 6); VCC = 6 V | 4 |
| Off-state switch leakage current (common channel) | IS(off) | -4 | 0.2 | 4 | µA | VI = VCC or GND, VINH = VIH (see Figure 7); VCC = 6 V | 4 |
| On-state switch leakage current | IS(on) | -1 | 0.1 | 1 | µA | VI = VCC or GND, VINH = VIL (see Figure 8); VCC = 6 V | 4 |
| Supply current | ICC | | 2 | 10 | µA | VI = VCC or GND; VCC = 6 V | 4 |
| Control input capacitance | CIC | | 3.5 | 10 | pF | A, B, INH | 4 |
| Common terminal capacitance, switch off | CIS | | 22 | 40 | pF | Switch off | 4 |
| Switch terminal capacitance, switch off | COS | | 6.7 | 15 | pF | Switch off | 4 |
| Maximum shift of output voltage of enabled analog channel | VΔout | | 0.05 | 1 | mV | VCC = 3.3 V; II ≤ 1 mA, RS ≤ 3.9 kΩ; TA = -40°C to 125°C | 4 |
| Maximum shift of output voltage of enabled analog channel | VΔout | | 0.1 | 1 | mV | VCC = 5 V; II ≤ 1 mA, RS ≤ 3.9 kΩ; TA = -40°C to 125°C | 4 |
| Maximum shift of output voltage of enabled analog channel | VΔout | | 0.345 | 5 | mV | VCC = 3.3 V; II ≤ 10 mA, RS ≤ 3.9 kΩ; TA = -40°C to 125°C | 4 |
| Maximum shift of output voltage of enabled analog channel | VΔout | | 0.067 | 5 | mV | VCC = 5 V; II ≤ 10 mA, RS ≤ 3.9 kΩ; TA = -40°C to 125°C | 4 |
| Maximum shift of output voltage of enabled analog channel | VΔout | | 0.05 | 2 | mV | VCC = 3.3 V; II ≤ 1 mA, RS ≤ 20 kΩ; TA = -40°C to 125°C | 4 |
| Maximum shift of output voltage of enabled analog channel | VΔout | | 0.11 | 2 | mV | VCC = 5 V; II ≤ 1 mA, RS ≤ 20 kΩ; TA = -40°C to 125°C | 4 |
| Maximum shift of output voltage of enabled analog channel | VΔout | | 0.05 | 20 | mV | VCC = 3.3 V; II ≤ 10 mA, RS ≤ 20 kΩ; TA = -40°C to 125°C | 4 |
| Maximum shift of output voltage of enabled analog channel | VΔout | | 0.024 | 20 | mV | VCC = 5 V; II ≤ 10 mA, RS ≤ 20 kΩ; TA = -40°C to 125°C | 4 |
| Propagation delay time, COM or Yn to Yn or COM | tPLH/tPHL | 7 | 19.5 | 35 | ns | VCC = 2 V, CL = 50 pF; TA = -40°C to 125°C | 5 |
| Propagation delay time, channel select to COM or Yn | tPLH/tPHL | 12.8 | 24.5 | 42 | ns | VCC = 2 V, CL = 50 pF; TA = -40°C to 125°C | 5 |
| Enable delay time, INH to COM or Yn | tPZH/tPZL | 12.5 | 23.6 | 57.5 | ns | VCC = 2 V, CL = 50 pF; TA = -40°C to 125°C | 5 |
| Disable delay time, INH to COM or Yn | tPHZ/tPLZ | 34 | 48.4 | 115 | ns | VCC = 2 V, CL = 50 pF; TA = -40°C to 125°C | 5 |
| Propagation delay time, COM or Yn to Yn or COM | tPLH/tPHL | 1.8 | 8 | 13.5 | ns | VCC = 6 V, CL = 50 pF; TA = -40°C to 125°C | 6 |
| Propagation delay time, channel select to COM or Yn | tPLH/tPHL | 2.8 | 9.5 | 17.5 | ns | VCC = 6 V, CL = 50 pF; TA = -40°C to 125°C | 6 |
| Enable delay time, INH to COM or Yn | tPZH/tPZL | 2 | 8.4 | 40 | ns | VCC = 6 V, CL = 50 pF; TA = -40°C to 125°C | 6 |
| Thermal impedance, junction to ambient, D package | θJA | | 73 | | °C/W | D package | 3 |
## CAD (KiCad official)
- Symbol: `SN74HC4852QDRQ1`
- Footprint: `Package_SO:SOIC-16_3.9x9.9mm_P1.27mm`
- 3D model: SOIC-16 (KiCad packages3D, STEP)
- 3D model files: `sn74hc4852qdrq1-etched.step` / `sn74hc4852qdrq1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sn74hc4852qdrq1.step` / `sn74hc4852qdrq1.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/sn74hc4852qdrq1.pdf) (21 pp, sha256 `3cbad84c84d2efd1`, retrieved 2026-10-27, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/sn74hc4852qdrq1-datasheet.pdf)