← Commit history

Initial commit: component/sn74hc377nsr

Ray ·eb892d03f7 ·
2 files changed +272
README.mdadded+57
@@ -0,0 +1,57 @@+# SN74HC377NSR++**Texas Instruments** · Flip Flops · SOIC-20-208mil++SN74HC377NSR from Texas Instruments, in a SOIC-20-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | CLKEN | input | Latched, active-low clock-enable input; when high the flip-flop outputs hold their previous state (Q0) regardless of CLK, and the input is latched to prevent false clocking by transitions on this pin. |+| 2 | 1Q | output | Data output of flip-flop 1, updated to the value of D1 on the positive-going edge of CLK when CLKEN is low; can drive up to 10 LSTTL loads. |+| 3 | 1D | input | Data input of flip-flop 1; must meet the specified setup time before the positive-going edge of CLK to be latched to output 1Q. |+| 4 | 2D | input | Data input of flip-flop 2; must meet the specified setup time before the positive-going edge of CLK to be latched to output 2Q. |+| 5 | 2Q | output | Data output of flip-flop 2, updated to the value of D2 on the positive-going edge of CLK when CLKEN is low; can drive up to 10 LSTTL loads. |+| 6 | 3Q | output | Data output of flip-flop 3, updated to the value of D3 on the positive-going edge of CLK when CLKEN is low; can drive up to 10 LSTTL loads. |+| 7 | 3D | input | Data input of flip-flop 3; must meet the specified setup time before the positive-going edge of CLK to be latched to output 3Q. |+| 8 | 4D | input | Data input of flip-flop 4; must meet the specified setup time before the positive-going edge of CLK to be latched to output 4Q. |+| 9 | 4Q | output | Data output of flip-flop 4, updated to the value of D4 on the positive-going edge of CLK when CLKEN is low; can drive up to 10 LSTTL loads. |+| 10 | GND | power_in | Ground reference (0 V) supply pin. |+| 11 | CLK | input | Common clock input; data at the D inputs meeting setup time is transferred to the Q outputs on the positive-going edge of this clock when CLKEN is low. |+| 12 | 5Q | output | Data output of flip-flop 5, updated to the value of D5 on the positive-going edge of CLK when CLKEN is low; can drive up to 10 LSTTL loads. |+| 13 | 5D | input | Data input of flip-flop 5; must meet the specified setup time before the positive-going edge of CLK to be latched to output 5Q. |+| 14 | 6D | input | Data input of flip-flop 6; must meet the specified setup time before the positive-going edge of CLK to be latched to output 6Q. |+| 15 | 6Q | output | Data output of flip-flop 6, updated to the value of D6 on the positive-going edge of CLK when CLKEN is low; can drive up to 10 LSTTL loads. |+| 16 | 7Q | output | Data output of flip-flop 7, updated to the value of D7 on the positive-going edge of CLK when CLKEN is low; can drive up to 10 LSTTL loads. |+| 17 | 7D | input | Data input of flip-flop 7; must meet the specified setup time before the positive-going edge of CLK to be latched to output 7Q. |+| 18 | 8D | input | Data input of flip-flop 8; must meet the specified setup time before the positive-going edge of CLK to be latched to output 8Q. |+| 19 | 8Q | output | Data output of flip-flop 8, updated to the value of D8 on the positive-going edge of CLK when CLKEN is low; can drive up to 10 LSTTL loads. |+| 20 | VCC | power_in | Positive supply voltage input; recommended operating range is 2 V to 6 V. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SOIC-20-208mil |+| Category | Logic |+| Pins | 20 |++## CAD (KiCad official)++- Symbol: `SN74HC377NSR`+- Footprint: `Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm`+- 3D model: SOIC-20-208mil (KiCad packages3D, STEP)+- 3D model files: `sn74hc377nsr-etched.step` / `sn74hc377nsr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sn74hc377nsr.step` / `sn74hc377nsr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/sn74hc377) (24 pp, sha256 `6f18bb15e374ea82`, retrieved 2026-09-24, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-sonnet-5` (text+vision), consensus `claude-opus-4-8` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/sn74hc377nsr-datasheet.pdf)
page.jsonadded+215
@@ -0,0 +1,215 @@+{+  "slug": "sn74hc377nsr",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments Flip Flops, SOIC-20-208mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "logic",+    "sn74hc377nsr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "sn74hc377nsr.kicad_sym",+    "sn74hc377nsr.kicad_mod",+    "sn74hc377nsr.glb",+    "sn74hc377nsr.step",+    "sn74hc377nsr.lbr",+    "docs/hero.png",+    "docs/sn74hc377nsr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "SN74HC377NSR",+    "manufacturer": "Texas Instruments",+    "package": "SOIC-20-208mil",+    "pin_count": 20,+    "category": "Logic",+    "subcategory": "Flip Flops",+    "datasheet": "https://www.ti.com/cn/lit/gpn/sn74hc377",+    "parts": {+      "symbol": "sn74hc377nsr.kicad_sym",+      "footprint": "sn74hc377nsr.kicad_mod",+      "model_3d": "sn74hc377nsr-etched.glb",+      "model_3d_plain": "sn74hc377nsr.glb",+      "model_3d_step": "sn74hc377nsr-etched.step",+      "model_3d_step_plain": "sn74hc377nsr.step",+      "lbr": "sn74hc377nsr.lbr"+    },+    "distributor_links": {+      "lcsc": "C7647"+    },+    "pins": [+      {+        "number": "1",+        "name": "CLKEN",+        "type": "input",+        "description": "Latched, active-low clock-enable input; when high the flip-flop outputs hold their previous state (Q0) regardless of CLK, and the input is latched to prevent false clocking by transitions on this pin."+      },+      {+        "number": "2",+        "name": "1Q",+        "type": "output",+        "description": "Data output of flip-flop 1, updated to the value of D1 on the positive-going edge of CLK when CLKEN is low; can drive up to 10 LSTTL loads."+      },+      {+        "number": "3",+        "name": "1D",+        "type": "input",+        "description": "Data input of flip-flop 1; must meet the specified setup time before the positive-going edge of CLK to be latched to output 1Q."+      },+      {+        "number": "4",+        "name": "2D",+        "type": "input",+        "description": "Data input of flip-flop 2; must meet the specified setup time before the positive-going edge of CLK to be latched to output 2Q."+      },+      {+        "number": "5",+        "name": "2Q",+        "type": "output",+        "description": "Data output of flip-flop 2, updated to the value of D2 on the positive-going edge of CLK when CLKEN is low; can drive up to 10 LSTTL loads."+      },+      {+        "number": "6",+        "name": "3Q",+        "type": "output",+        "description": "Data output of flip-flop 3, updated to the value of D3 on the positive-going edge of CLK when CLKEN is low; can drive up to 10 LSTTL loads."+      },+      {+        "number": "7",+        "name": "3D",+        "type": "input",+        "description": "Data input of flip-flop 3; must meet the specified setup time before the positive-going edge of CLK to be latched to output 3Q."+      },+      {+        "number": "8",+        "name": "4D",+        "type": "input",+        "description": "Data input of flip-flop 4; must meet the specified setup time before the positive-going edge of CLK to be latched to output 4Q."+      },+      {+        "number": "9",+        "name": "4Q",+        "type": "output",+        "description": "Data output of flip-flop 4, updated to the value of D4 on the positive-going edge of CLK when CLKEN is low; can drive up to 10 LSTTL loads."+      },+      {+        "number": "10",+        "name": "GND",+        "type": "power_in",+        "description": "Ground reference (0 V) supply pin."+      },+      {+        "number": "11",+        "name": "CLK",+        "type": "input",+        "description": "Common clock input; data at the D inputs meeting setup time is transferred to the Q outputs on the positive-going edge of this clock when CLKEN is low."+      },+      {+        "number": "12",+        "name": "5Q",+        "type": "output",+        "description": "Data output of flip-flop 5, updated to the value of D5 on the positive-going edge of CLK when CLKEN is low; can drive up to 10 LSTTL loads."+      },+      {+        "number": "13",+        "name": "5D",+        "type": "input",+        "description": "Data input of flip-flop 5; must meet the specified setup time before the positive-going edge of CLK to be latched to output 5Q."+      },+      {+        "number": "14",+        "name": "6D",+        "type": "input",+        "description": "Data input of flip-flop 6; must meet the specified setup time before the positive-going edge of CLK to be latched to output 6Q."+      },+      {+        "number": "15",+        "name": "6Q",+        "type": "output",+        "description": "Data output of flip-flop 6, updated to the value of D6 on the positive-going edge of CLK when CLKEN is low; can drive up to 10 LSTTL loads."+      },+      {+        "number": "16",+        "name": "7Q",+        "type": "output",+        "description": "Data output of flip-flop 7, updated to the value of D7 on the positive-going edge of CLK when CLKEN is low; can drive up to 10 LSTTL loads."+      },+      {+        "number": "17",+        "name": "7D",+        "type": "input",+        "description": "Data input of flip-flop 7; must meet the specified setup time before the positive-going edge of CLK to be latched to output 7Q."+      },+      {+        "number": "18",+        "name": "8D",+        "type": "input",+        "description": "Data input of flip-flop 8; must meet the specified setup time before the positive-going edge of CLK to be latched to output 8Q."+      },+      {+        "number": "19",+        "name": "8Q",+        "type": "output",+        "description": "Data output of flip-flop 8, updated to the value of D8 on the positive-going edge of CLK when CLKEN is low; can drive up to 10 LSTTL loads."+      },+      {+        "number": "20",+        "name": "VCC",+        "type": "power_in",+        "description": "Positive supply voltage input; recommended operating range is 2 V to 6 V."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-sonnet-5",+        "primary_mode": "text+vision",+        "consensus_model": "claude-opus-4-8",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "vision extraction: provenance cannot be text-verified; needs consensus"+        ],+        "pages_sent": 24,+        "cost_usd": 0.6133,+        "at": "2026-09-24T05:31:14"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/sn74hc377",+        "pages": 24,+        "sha256": "6f18bb15e374ea82",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 20,+        "described": 20,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file