← Commit history

Initial commit: component/sn74hc374dwr

Ray ·4682fcc730 ·
2 files changed +287
README.mdadded+57
@@ -0,0 +1,57 @@+# SN74HC374DWR++**Texas Instruments** · Flip Flops · SOIC-20-300mil++SN74HC374DWR from Texas Instruments, in a SOIC-20-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | OE | input | Active-low three-state output enable common to all eight Q outputs; when HIGH all outputs enter high-impedance state; when LOW outputs reflect stored flip-flop data; VI = 0 to VCC. |+| 2 | 1Q | tri_state | Three-state data output of flip-flop 1; updated on rising edge of CLK when OE is LOW; VOH min 4.4 V / VOL max 0.1 V at VCC = 4.5 V with IOH/IOL = ±6 mA; high-impedance when OE is HIGH. |+| 3 | 1D | input | Data input to flip-flop 1; logic level present at this pin is captured on the positive transition of CLK; setup time tsu = 25 ns min at VCC = 4.5 V. |+| 4 | 2D | input | Data input to flip-flop 2; logic level present at this pin is captured on the positive transition of CLK; setup time tsu = 25 ns min at VCC = 4.5 V. |+| 5 | 2Q | tri_state | Three-state data output of flip-flop 2; updated on rising edge of CLK when OE is LOW; VOH min 4.4 V / VOL max 0.1 V at VCC = 4.5 V with IOH/IOL = ±6 mA; high-impedance when OE is HIGH. |+| 6 | 3Q | tri_state | Three-state data output of flip-flop 3; updated on rising edge of CLK when OE is LOW; VOH min 4.4 V / VOL max 0.1 V at VCC = 4.5 V with IOH/IOL = ±6 mA; high-impedance when OE is HIGH. |+| 7 | 3D | input | Data input to flip-flop 3; logic level present at this pin is captured on the positive transition of CLK; setup time tsu = 25 ns min at VCC = 4.5 V. |+| 8 | 4D | input | Data input to flip-flop 4; logic level present at this pin is captured on the positive transition of CLK; setup time tsu = 25 ns min at VCC = 4.5 V. |+| 9 | 4Q | tri_state | Three-state data output of flip-flop 4; updated on rising edge of CLK when OE is LOW; VOH min 4.4 V / VOL max 0.1 V at VCC = 4.5 V with IOH/IOL = ±6 mA; high-impedance when OE is HIGH. |+| 10 | GND | power_in | Ground reference (0 V); continuous current through GND pin not to exceed ±70 mA. |+| 11 | CLK | input | Positive-edge clock common to all eight flip-flops; Q outputs update on the LOW-to-HIGH transition; fclock max 24 MHz at VCC = 4.5 V; pulse-width tw min 20 ns at VCC = 4.5 V. |+| 12 | 5Q | tri_state | Three-state data output of flip-flop 5; updated on rising edge of CLK when OE is LOW; VOH min 4.4 V / VOL max 0.1 V at VCC = 4.5 V with IOH/IOL = ±6 mA; high-impedance when OE is HIGH. |+| 13 | 5D | input | Data input to flip-flop 5; logic level present at this pin is captured on the positive transition of CLK; setup time tsu = 25 ns min at VCC = 4.5 V. |+| 14 | 6D | input | Data input to flip-flop 6; logic level present at this pin is captured on the positive transition of CLK; setup time tsu = 25 ns min at VCC = 4.5 V. |+| 15 | 6Q | tri_state | Three-state data output of flip-flop 6; updated on rising edge of CLK when OE is LOW; VOH min 4.4 V / VOL max 0.1 V at VCC = 4.5 V with IOH/IOL = ±6 mA; high-impedance when OE is HIGH. |+| 16 | 7Q | tri_state | Three-state data output of flip-flop 7; updated on rising edge of CLK when OE is LOW; VOH min 4.4 V / VOL max 0.1 V at VCC = 4.5 V with IOH/IOL = ±6 mA; high-impedance when OE is HIGH. |+| 17 | 7D | input | Data input to flip-flop 7; logic level present at this pin is captured on the positive transition of CLK; setup time tsu = 25 ns min at VCC = 4.5 V. |+| 18 | 8D | input | Data input to flip-flop 8; logic level present at this pin is captured on the positive transition of CLK; setup time tsu = 25 ns min at VCC = 4.5 V. |+| 19 | 8Q | tri_state | Three-state data output of flip-flop 8; updated on rising edge of CLK when OE is LOW; VOH min 4.4 V / VOL max 0.1 V at VCC = 4.5 V with IOH/IOL = ±6 mA; high-impedance when OE is HIGH. |+| 20 | VCC | power_in | Positive supply voltage; recommended operating range 2 V to 6 V; ICC max 80 µA at VCC = 6 V, IO = 0; bypass with 0.1 µF capacitor as close to pin as possible. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SOIC-20-300mil |+| Category | Logic |+| Pins | 20 |++## CAD (KiCad official)++- Symbol: `SN74HC374DWR`+- Footprint: `Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm`+- 3D model: SOIC-20-300mil (KiCad packages3D, STEP)+- 3D model files: `sn74hc374dwr-etched.step` / `sn74hc374dwr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sn74hc374dwr.step` / `sn74hc374dwr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/sn74hc374) (32 pp, sha256 `e72f5f2d1a24107d`, retrieved 2026-09-27, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-sonnet-4-6` (text+vision), consensus `claude-opus-4-7` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/sn74hc374dwr-datasheet.pdf)
page.jsonadded+230
@@ -0,0 +1,230 @@+{+  "slug": "sn74hc374dwr",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments Flip Flops, SOIC-20-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "logic",+    "sn74hc374dwr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "sn74hc374dwr.kicad_sym",+    "sn74hc374dwr.kicad_mod",+    "sn74hc374dwr.glb",+    "sn74hc374dwr.step",+    "sn74hc374dwr.lbr",+    "docs/hero.png",+    "docs/sn74hc374dwr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "SN74HC374DWR",+    "manufacturer": "Texas Instruments",+    "package": "SOIC-20-300mil",+    "pin_count": 20,+    "category": "Logic",+    "subcategory": "Flip Flops",+    "datasheet": "https://www.ti.com/cn/lit/gpn/sn74hc374",+    "parts": {+      "symbol": "sn74hc374dwr.kicad_sym",+      "footprint": "sn74hc374dwr.kicad_mod",+      "model_3d": "sn74hc374dwr-etched.glb",+      "model_3d_plain": "sn74hc374dwr.glb",+      "model_3d_step": "sn74hc374dwr-etched.step",+      "model_3d_step_plain": "sn74hc374dwr.step",+      "lbr": "sn74hc374dwr.lbr"+    },+    "distributor_links": {+      "lcsc": "C6845",+      "digikey": "296-1201-2-ND",+      "mouser": "595-SN74HC374DWR"+    },+    "distributor_check": {+      "checked_at": "2026-09-27T09:55:42Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "296-1201-2-ND",+        "status": "found",+        "lifecycle": "Active"+      },+      "mouser": {+        "pn": "595-SN74HC374DWR",+        "status": "found"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "OE",+        "type": "input",+        "description": "Active-low three-state output enable common to all eight Q outputs; when HIGH all outputs enter high-impedance state; when LOW outputs reflect stored flip-flop data; VI = 0 to VCC."+      },+      {+        "number": "2",+        "name": "1Q",+        "type": "tri_state",+        "description": "Three-state data output of flip-flop 1; updated on rising edge of CLK when OE is LOW; VOH min 4.4 V / VOL max 0.1 V at VCC = 4.5 V with IOH/IOL = ±6 mA; high-impedance when OE is HIGH."+      },+      {+        "number": "3",+        "name": "1D",+        "type": "input",+        "description": "Data input to flip-flop 1; logic level present at this pin is captured on the positive transition of CLK; setup time tsu = 25 ns min at VCC = 4.5 V."+      },+      {+        "number": "4",+        "name": "2D",+        "type": "input",+        "description": "Data input to flip-flop 2; logic level present at this pin is captured on the positive transition of CLK; setup time tsu = 25 ns min at VCC = 4.5 V."+      },+      {+        "number": "5",+        "name": "2Q",+        "type": "tri_state",+        "description": "Three-state data output of flip-flop 2; updated on rising edge of CLK when OE is LOW; VOH min 4.4 V / VOL max 0.1 V at VCC = 4.5 V with IOH/IOL = ±6 mA; high-impedance when OE is HIGH."+      },+      {+        "number": "6",+        "name": "3Q",+        "type": "tri_state",+        "description": "Three-state data output of flip-flop 3; updated on rising edge of CLK when OE is LOW; VOH min 4.4 V / VOL max 0.1 V at VCC = 4.5 V with IOH/IOL = ±6 mA; high-impedance when OE is HIGH."+      },+      {+        "number": "7",+        "name": "3D",+        "type": "input",+        "description": "Data input to flip-flop 3; logic level present at this pin is captured on the positive transition of CLK; setup time tsu = 25 ns min at VCC = 4.5 V."+      },+      {+        "number": "8",+        "name": "4D",+        "type": "input",+        "description": "Data input to flip-flop 4; logic level present at this pin is captured on the positive transition of CLK; setup time tsu = 25 ns min at VCC = 4.5 V."+      },+      {+        "number": "9",+        "name": "4Q",+        "type": "tri_state",+        "description": "Three-state data output of flip-flop 4; updated on rising edge of CLK when OE is LOW; VOH min 4.4 V / VOL max 0.1 V at VCC = 4.5 V with IOH/IOL = ±6 mA; high-impedance when OE is HIGH."+      },+      {+        "number": "10",+        "name": "GND",+        "type": "power_in",+        "description": "Ground reference (0 V); continuous current through GND pin not to exceed ±70 mA."+      },+      {+        "number": "11",+        "name": "CLK",+        "type": "input",+        "description": "Positive-edge clock common to all eight flip-flops; Q outputs update on the LOW-to-HIGH transition; fclock max 24 MHz at VCC = 4.5 V; pulse-width tw min 20 ns at VCC = 4.5 V."+      },+      {+        "number": "12",+        "name": "5Q",+        "type": "tri_state",+        "description": "Three-state data output of flip-flop 5; updated on rising edge of CLK when OE is LOW; VOH min 4.4 V / VOL max 0.1 V at VCC = 4.5 V with IOH/IOL = ±6 mA; high-impedance when OE is HIGH."+      },+      {+        "number": "13",+        "name": "5D",+        "type": "input",+        "description": "Data input to flip-flop 5; logic level present at this pin is captured on the positive transition of CLK; setup time tsu = 25 ns min at VCC = 4.5 V."+      },+      {+        "number": "14",+        "name": "6D",+        "type": "input",+        "description": "Data input to flip-flop 6; logic level present at this pin is captured on the positive transition of CLK; setup time tsu = 25 ns min at VCC = 4.5 V."+      },+      {+        "number": "15",+        "name": "6Q",+        "type": "tri_state",+        "description": "Three-state data output of flip-flop 6; updated on rising edge of CLK when OE is LOW; VOH min 4.4 V / VOL max 0.1 V at VCC = 4.5 V with IOH/IOL = ±6 mA; high-impedance when OE is HIGH."+      },+      {+        "number": "16",+        "name": "7Q",+        "type": "tri_state",+        "description": "Three-state data output of flip-flop 7; updated on rising edge of CLK when OE is LOW; VOH min 4.4 V / VOL max 0.1 V at VCC = 4.5 V with IOH/IOL = ±6 mA; high-impedance when OE is HIGH."+      },+      {+        "number": "17",+        "name": "7D",+        "type": "input",+        "description": "Data input to flip-flop 7; logic level present at this pin is captured on the positive transition of CLK; setup time tsu = 25 ns min at VCC = 4.5 V."+      },+      {+        "number": "18",+        "name": "8D",+        "type": "input",+        "description": "Data input to flip-flop 8; logic level present at this pin is captured on the positive transition of CLK; setup time tsu = 25 ns min at VCC = 4.5 V."+      },+      {+        "number": "19",+        "name": "8Q",+        "type": "tri_state",+        "description": "Three-state data output of flip-flop 8; updated on rising edge of CLK when OE is LOW; VOH min 4.4 V / VOL max 0.1 V at VCC = 4.5 V with IOH/IOL = ±6 mA; high-impedance when OE is HIGH."+      },+      {+        "number": "20",+        "name": "VCC",+        "type": "power_in",+        "description": "Positive supply voltage; recommended operating range 2 V to 6 V; ICC max 80 µA at VCC = 6 V, IO = 0; bypass with 0.1 µF capacitor as close to pin as possible."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-sonnet-4-6",+        "primary_mode": "text+vision",+        "consensus_model": "claude-opus-4-7",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "vision extraction: provenance cannot be text-verified; needs consensus"+        ],+        "pages_sent": 32,+        "cost_usd": 0.6366,+        "at": "2026-09-27T09:55:25"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/sn74hc374",+        "pages": 32,+        "sha256": "e72f5f2d1a24107d",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 20,+        "described": 20,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file