← Commit history

Initial commit: component/sn74hc374dbr

Ray ·6f0990471b ·
2 files changed +287
README.mdadded+57
@@ -0,0 +1,57 @@+# SN74HC374DBR++**Texas Instruments** · Flip Flops · SSOP-20-208mil++SN74HC374DBR from Texas Instruments, in a SSOP-20-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | OE | input | Active-low output enable that places the eight outputs in normal logic state or high-impedance state; it does not affect internal flip-flop operation and should be tied to VCC through a pullup resistor for power up/down. |+| 2 | 1Q | tri_state | Channel 1 3-state output, driving ±6 mA at 5 V. |+| 3 | 1D | input | Channel 1 data input, captured on the positive clock transition. |+| 4 | 2D | input | Channel 2 data input, captured on the positive clock transition. |+| 5 | 2Q | tri_state | Channel 2 3-state output, driving ±6 mA at 5 V. |+| 6 | 3Q | tri_state | Channel 3 3-state output, driving ±6 mA at 5 V. |+| 7 | 3D | input | Channel 3 data input, captured on the positive clock transition. |+| 8 | 4D | input | Channel 4 data input, captured on the positive clock transition. |+| 9 | 4Q | tri_state | Channel 4 3-state output, driving ±6 mA at 5 V. |+| 10 | GND | power_in | Ground reference for the device. |+| 11 | CLK | input | Clock input; Q outputs take the D input levels on the positive (rising) clock transition. |+| 12 | 5Q | tri_state | Channel 5 3-state output, driving ±6 mA at 5 V. |+| 13 | 5D | input | Channel 5 data input, captured on the positive clock transition. |+| 14 | 6D | input | Channel 6 data input, captured on the positive clock transition. |+| 15 | 6Q | tri_state | Channel 6 3-state output, driving ±6 mA at 5 V. |+| 16 | 7Q | tri_state | Channel 7 3-state output, driving ±6 mA at 5 V. |+| 17 | 7D | input | Channel 7 data input, captured on the positive clock transition. |+| 18 | 8D | input | Channel 8 data input, captured on the positive clock transition. |+| 19 | 8Q | tri_state | Channel 8 3-state output, driving ±6 mA at 5 V. |+| 20 | VCC | power_in | Supply voltage, 2 V to 6 V recommended, with a 0.1 µF bypass capacitor placed close to the pin. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SSOP-20-208mil |+| Category | Logic |+| Pins | 20 |++## CAD (KiCad official)++- Symbol: `SN74HC374DBR`+- Footprint: `Package_SO:SSOP-20_5.3x7.2mm_P0.65mm`+- 3D model: SSOP-20-208mil (KiCad packages3D, STEP)+- 3D model files: `sn74hc374dbr-etched.step` / `sn74hc374dbr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sn74hc374dbr.step` / `sn74hc374dbr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/sn54hc374) (32 pp, sha256 `e72f5f2d1a24107d`, retrieved 2026-10-01, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text+vision), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/sn74hc374dbr-datasheet.pdf)
page.jsonadded+230
@@ -0,0 +1,230 @@+{+  "slug": "sn74hc374dbr",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments Flip Flops, SSOP-20-208mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "logic",+    "sn74hc374dbr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "sn74hc374dbr.kicad_sym",+    "sn74hc374dbr.kicad_mod",+    "sn74hc374dbr.glb",+    "sn74hc374dbr.step",+    "sn74hc374dbr.lbr",+    "docs/hero.png",+    "docs/sn74hc374dbr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "SN74HC374DBR",+    "manufacturer": "Texas Instruments",+    "package": "SSOP-20-208mil",+    "pin_count": 20,+    "category": "Logic",+    "subcategory": "Flip Flops",+    "datasheet": "https://www.ti.com/cn/lit/gpn/sn54hc374",+    "parts": {+      "symbol": "sn74hc374dbr.kicad_sym",+      "footprint": "sn74hc374dbr.kicad_mod",+      "model_3d": "sn74hc374dbr-etched.glb",+      "model_3d_plain": "sn74hc374dbr.glb",+      "model_3d_step": "sn74hc374dbr-etched.step",+      "model_3d_step_plain": "sn74hc374dbr.step",+      "lbr": "sn74hc374dbr.lbr"+    },+    "distributor_links": {+      "lcsc": "C2877487",+      "digikey": "296-8312-2-ND",+      "mouser": "595-SN74HC374DBR"+    },+    "distributor_check": {+      "checked_at": "2026-10-01T06:39:55Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "296-8312-2-ND",+        "status": "found",+        "lifecycle": "Active"+      },+      "mouser": {+        "pn": "595-SN74HC374DBR",+        "status": "found"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "OE",+        "type": "input",+        "description": "Active-low output enable that places the eight outputs in normal logic state or high-impedance state; it does not affect internal flip-flop operation and should be tied to VCC through a pullup resistor for power up/down."+      },+      {+        "number": "2",+        "name": "1Q",+        "type": "tri_state",+        "description": "Channel 1 3-state output, driving ±6 mA at 5 V."+      },+      {+        "number": "3",+        "name": "1D",+        "type": "input",+        "description": "Channel 1 data input, captured on the positive clock transition."+      },+      {+        "number": "4",+        "name": "2D",+        "type": "input",+        "description": "Channel 2 data input, captured on the positive clock transition."+      },+      {+        "number": "5",+        "name": "2Q",+        "type": "tri_state",+        "description": "Channel 2 3-state output, driving ±6 mA at 5 V."+      },+      {+        "number": "6",+        "name": "3Q",+        "type": "tri_state",+        "description": "Channel 3 3-state output, driving ±6 mA at 5 V."+      },+      {+        "number": "7",+        "name": "3D",+        "type": "input",+        "description": "Channel 3 data input, captured on the positive clock transition."+      },+      {+        "number": "8",+        "name": "4D",+        "type": "input",+        "description": "Channel 4 data input, captured on the positive clock transition."+      },+      {+        "number": "9",+        "name": "4Q",+        "type": "tri_state",+        "description": "Channel 4 3-state output, driving ±6 mA at 5 V."+      },+      {+        "number": "10",+        "name": "GND",+        "type": "power_in",+        "description": "Ground reference for the device."+      },+      {+        "number": "11",+        "name": "CLK",+        "type": "input",+        "description": "Clock input; Q outputs take the D input levels on the positive (rising) clock transition."+      },+      {+        "number": "12",+        "name": "5Q",+        "type": "tri_state",+        "description": "Channel 5 3-state output, driving ±6 mA at 5 V."+      },+      {+        "number": "13",+        "name": "5D",+        "type": "input",+        "description": "Channel 5 data input, captured on the positive clock transition."+      },+      {+        "number": "14",+        "name": "6D",+        "type": "input",+        "description": "Channel 6 data input, captured on the positive clock transition."+      },+      {+        "number": "15",+        "name": "6Q",+        "type": "tri_state",+        "description": "Channel 6 3-state output, driving ±6 mA at 5 V."+      },+      {+        "number": "16",+        "name": "7Q",+        "type": "tri_state",+        "description": "Channel 7 3-state output, driving ±6 mA at 5 V."+      },+      {+        "number": "17",+        "name": "7D",+        "type": "input",+        "description": "Channel 7 data input, captured on the positive clock transition."+      },+      {+        "number": "18",+        "name": "8D",+        "type": "input",+        "description": "Channel 8 data input, captured on the positive clock transition."+      },+      {+        "number": "19",+        "name": "8Q",+        "type": "tri_state",+        "description": "Channel 8 3-state output, driving ±6 mA at 5 V."+      },+      {+        "number": "20",+        "name": "VCC",+        "type": "power_in",+        "description": "Supply voltage, 2 V to 6 V recommended, with a 0.1 µF bypass capacitor placed close to the pin."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.3",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.3",+        "primary_model": "claude-sonnet-5-5",+        "primary_mode": "text+vision",+        "consensus_model": "claude-opus-5-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "vision extraction: provenance cannot be text-verified; needs consensus"+        ],+        "pages_sent": 32,+        "cost_usd": 0.521,+        "at": "2026-10-01T06:39:36"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/sn54hc374",+        "pages": 32,+        "sha256": "e72f5f2d1a24107d",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 20,+        "described": 20,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file