← Commit history
README.mdadded+57@@ -0,0 +1,57 @@+# SN74HC273N++**Texas Instruments** · Flip Flops · DIP-20++SN74HC273N from Texas Instruments, in a DIP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | CLR | input | Active low clear input; when low, forces all Q outputs low regardless of clock or data inputs |+| 2 | 1Q | output | Output of flip-flop 1; can drive up to 10 LSTTL loads with ±4 mA output drive at 5V |+| 3 | 1D | input | Data input for flip-flop 1; sampled on rising edge of CLK when CLR is inactive; meets setup and hold time requirements of section 6.8 |+| 4 | 2D | input | Data input for flip-flop 2; sampled on rising edge of CLK when CLR is inactive; meets setup and hold time requirements of section 6.8 |+| 5 | 2Q | output | Output of flip-flop 2; can drive up to 10 LSTTL loads with ±4 mA output drive at 5V |+| 6 | 3Q | output | Output of flip-flop 3; can drive up to 10 LSTTL loads with ±4 mA output drive at 5V |+| 7 | 3D | input | Data input for flip-flop 3; sampled on rising edge of CLK when CLR is inactive; meets setup and hold time requirements of section 6.8 |+| 8 | 4D | input | Data input for flip-flop 4; sampled on rising edge of CLK when CLR is inactive; meets setup and hold time requirements of section 6.8 |+| 9 | 4Q | output | Output of flip-flop 4; can drive up to 10 LSTTL loads with ±4 mA output drive at 5V |+| 10 | GND | power_in | Ground reference voltage |+| 11 | CLK | input | Clock input; rising edge triggers data transfer from D inputs to Q outputs; maximum frequency and minimum pulse duration requirements in section 6.8 |+| 12 | 5Q | output | Output of flip-flop 5; can drive up to 10 LSTTL loads with ±4 mA output drive at 5V |+| 13 | 5D | input | Data input for flip-flop 5; sampled on rising edge of CLK when CLR is inactive; meets setup and hold time requirements of section 6.8 |+| 14 | 6D | input | Data input for flip-flop 6; sampled on rising edge of CLK when CLR is inactive; meets setup and hold time requirements of section 6.8 |+| 15 | 6Q | output | Output of flip-flop 6; can drive up to 10 LSTTL loads with ±4 mA output drive at 5V |+| 16 | 7Q | output | Output of flip-flop 7; can drive up to 10 LSTTL loads with ±4 mA output drive at 5V |+| 17 | 7D | input | Data input for flip-flop 7; sampled on rising edge of CLK when CLR is inactive; meets setup and hold time requirements of section 6.8 |+| 18 | 8D | input | Data input for flip-flop 8; sampled on rising edge of CLK when CLR is inactive; meets setup and hold time requirements of section 6.8 |+| 19 | 8Q | output | Output of flip-flop 8; can drive up to 10 LSTTL loads with ±4 mA output drive at 5V |+| 20 | VCC | power_out | Power supply; operating voltage range 2V to 6V per section 6.3 recommended operating conditions |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | DIP-20 |+| Category | Logic |+| Pins | 20 |++## CAD (KiCad official)++- Symbol: `SN74HC273N`+- Footprint: `Package_DIP:DIP-20_W7.62mm`+- 3D model: DIP-20 (KiCad packages3D, STEP)+- 3D model files: `sn74hc273n-etched.step` / `sn74hc273n-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sn74hc273n.step` / `sn74hc273n.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/sn74hc273) (37 pp, sha256 `c8f36a86a0f545d8`, retrieved 2026-09-24, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/sn74hc273n-datasheet.pdf)
page.jsonadded+213@@ -0,0 +1,213 @@+{+ "slug": "sn74hc273n",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Flip Flops, DIP-20. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "logic",+ "sn74hc273n",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "sn74hc273n.kicad_sym",+ "sn74hc273n.kicad_mod",+ "sn74hc273n.glb",+ "sn74hc273n.step",+ "sn74hc273n.lbr",+ "docs/hero.png",+ "docs/sn74hc273n-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "SN74HC273N",+ "manufacturer": "Texas Instruments",+ "package": "DIP-20",+ "pin_count": 20,+ "category": "Logic",+ "subcategory": "Flip Flops",+ "datasheet": "https://www.ti.com/cn/lit/gpn/sn74hc273",+ "parts": {+ "symbol": "sn74hc273n.kicad_sym",+ "footprint": "sn74hc273n.kicad_mod",+ "model_3d": "sn74hc273n-etched.glb",+ "model_3d_plain": "sn74hc273n.glb",+ "model_3d_step": "sn74hc273n-etched.step",+ "model_3d_step_plain": "sn74hc273n.step",+ "lbr": "sn74hc273n.lbr"+ },+ "distributor_links": {+ "lcsc": "C5238"+ },+ "pins": [+ {+ "number": "1",+ "name": "CLR",+ "type": "input",+ "description": "Active low clear input; when low, forces all Q outputs low regardless of clock or data inputs"+ },+ {+ "number": "2",+ "name": "1Q",+ "type": "output",+ "description": "Output of flip-flop 1; can drive up to 10 LSTTL loads with ±4 mA output drive at 5V"+ },+ {+ "number": "3",+ "name": "1D",+ "type": "input",+ "description": "Data input for flip-flop 1; sampled on rising edge of CLK when CLR is inactive; meets setup and hold time requirements of section 6.8"+ },+ {+ "number": "4",+ "name": "2D",+ "type": "input",+ "description": "Data input for flip-flop 2; sampled on rising edge of CLK when CLR is inactive; meets setup and hold time requirements of section 6.8"+ },+ {+ "number": "5",+ "name": "2Q",+ "type": "output",+ "description": "Output of flip-flop 2; can drive up to 10 LSTTL loads with ±4 mA output drive at 5V"+ },+ {+ "number": "6",+ "name": "3Q",+ "type": "output",+ "description": "Output of flip-flop 3; can drive up to 10 LSTTL loads with ±4 mA output drive at 5V"+ },+ {+ "number": "7",+ "name": "3D",+ "type": "input",+ "description": "Data input for flip-flop 3; sampled on rising edge of CLK when CLR is inactive; meets setup and hold time requirements of section 6.8"+ },+ {+ "number": "8",+ "name": "4D",+ "type": "input",+ "description": "Data input for flip-flop 4; sampled on rising edge of CLK when CLR is inactive; meets setup and hold time requirements of section 6.8"+ },+ {+ "number": "9",+ "name": "4Q",+ "type": "output",+ "description": "Output of flip-flop 4; can drive up to 10 LSTTL loads with ±4 mA output drive at 5V"+ },+ {+ "number": "10",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference voltage"+ },+ {+ "number": "11",+ "name": "CLK",+ "type": "input",+ "description": "Clock input; rising edge triggers data transfer from D inputs to Q outputs; maximum frequency and minimum pulse duration requirements in section 6.8"+ },+ {+ "number": "12",+ "name": "5Q",+ "type": "output",+ "description": "Output of flip-flop 5; can drive up to 10 LSTTL loads with ±4 mA output drive at 5V"+ },+ {+ "number": "13",+ "name": "5D",+ "type": "input",+ "description": "Data input for flip-flop 5; sampled on rising edge of CLK when CLR is inactive; meets setup and hold time requirements of section 6.8"+ },+ {+ "number": "14",+ "name": "6D",+ "type": "input",+ "description": "Data input for flip-flop 6; sampled on rising edge of CLK when CLR is inactive; meets setup and hold time requirements of section 6.8"+ },+ {+ "number": "15",+ "name": "6Q",+ "type": "output",+ "description": "Output of flip-flop 6; can drive up to 10 LSTTL loads with ±4 mA output drive at 5V"+ },+ {+ "number": "16",+ "name": "7Q",+ "type": "output",+ "description": "Output of flip-flop 7; can drive up to 10 LSTTL loads with ±4 mA output drive at 5V"+ },+ {+ "number": "17",+ "name": "7D",+ "type": "input",+ "description": "Data input for flip-flop 7; sampled on rising edge of CLK when CLR is inactive; meets setup and hold time requirements of section 6.8"+ },+ {+ "number": "18",+ "name": "8D",+ "type": "input",+ "description": "Data input for flip-flop 8; sampled on rising edge of CLK when CLR is inactive; meets setup and hold time requirements of section 6.8"+ },+ {+ "number": "19",+ "name": "8Q",+ "type": "output",+ "description": "Output of flip-flop 8; can drive up to 10 LSTTL loads with ±4 mA output drive at 5V"+ },+ {+ "number": "20",+ "name": "VCC",+ "type": "power_out",+ "description": "Power supply; operating voltage range 2V to 6V per section 6.3 recommended operating conditions"+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [],+ "pages_sent": 37,+ "cost_usd": 0.2759,+ "at": "2026-09-24T02:02:16"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/sn74hc273",+ "pages": 37,+ "sha256": "c8f36a86a0f545d8",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 20,+ "described": 20,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}