← Commit history
sn74hc258pwr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
2 files changed
+90−10
package.json+48−8@@ -86,7 +86,7 @@ "number": "4", "name": "1Y", "type": "tri_state",- "description": "Channel-1 inverted 3-state output; presents complement of selected input when G is low, high-impedance when G is high; \u00b16 mA drive at 5 V."+ "description": "Channel-1 inverted 3-state output; presents complement of selected input when G is low, high-impedance when G is high; ±6 mA drive at 5 V." }, { "number": "5",@@ -104,19 +104,19 @@ "number": "7", "name": "2Y", "type": "tri_state",- "description": "Channel-2 inverted 3-state output; presents complement of selected input when G is low, high-impedance when G is high; \u00b16 mA drive at 5 V."+ "description": "Channel-2 inverted 3-state output; presents complement of selected input when G is low, high-impedance when G is high; ±6 mA drive at 5 V." }, { "number": "8", "name": "GND", "type": "power_in",- "description": "Ground reference; continuous current through GND pin not to exceed \u00b170 mA."+ "description": "Ground reference; continuous current through GND pin not to exceed ±70 mA." }, { "number": "9", "name": "3Y", "type": "tri_state",- "description": "Channel-3 inverted 3-state output; presents complement of selected input when G is low, high-impedance when G is high; \u00b16 mA drive at 5 V."+ "description": "Channel-3 inverted 3-state output; presents complement of selected input when G is low, high-impedance when G is high; ±6 mA drive at 5 V." }, { "number": "10",@@ -134,7 +134,7 @@ "number": "12", "name": "4Y", "type": "tri_state",- "description": "Channel-4 inverted 3-state output; presents complement of selected input when G is low, high-impedance when G is high; \u00b16 mA drive at 5 V."+ "description": "Channel-4 inverted 3-state output; presents complement of selected input when G is low, high-impedance when G is high; ±6 mA drive at 5 V." }, { "number": "13",@@ -158,7 +158,7 @@ "number": "16", "name": "VCC", "type": "power_in",- "description": "Positive supply voltage; recommended operating range 2 V to 6 V; continuous current not to exceed \u00b170 mA; decouple with 0.1 \u00b5F ceramic capacitor placed as close to pin as possible."+ "description": "Positive supply voltage; recommended operating range 2 V to 6 V; continuous current not to exceed ±70 mA; decouple with 0.1 µF ceramic capacitor placed as close to pin as possible." } ], "provenance": {@@ -195,6 +195,46 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "sn74hc258pwr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.4,+ 5.0,+ 1.1+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "6ad5e98224d02a427d9a6b929a28dbc158b9925fba5adec12db05079f1016948",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "sn74hc258pwr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.4,+ 5.0,+ 1.1+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "95dd31a29feb3767276474d14e88bdc9c3fbd3978b247c9c36c510199df504ab",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }-}+}
page.json+42−2@@ -180,7 +180,47 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "sn74hc258pwr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.4,+ 5.0,+ 1.1+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "6ad5e98224d02a427d9a6b929a28dbc158b9925fba5adec12db05079f1016948",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "sn74hc258pwr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.4,+ 5.0,+ 1.1+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "95dd31a29feb3767276474d14e88bdc9c3fbd3978b247c9c36c510199df504ab",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }, "metadata": { "specs": {@@ -227,4 +267,4 @@ "visibility": { "public": true }-}+}