main
Ray sn74hc257pwr: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC bod… 1b40a54
{
  "slug": "sn74hc257pwr",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Signal Switches, Multiplexers, Decoders, TSSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "logic",
    "sn74hc257pwr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "sn74hc257pwr.kicad_sym",
    "sn74hc257pwr.kicad_mod",
    "sn74hc257pwr.glb",
    "sn74hc257pwr.step",
    "sn74hc257pwr.lbr",
    "docs/hero.png",
    "docs/sn74hc257pwr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "component": {
    "mpn": "SN74HC257PWR",
    "manufacturer": "Texas Instruments",
    "package": "TSSOP-16",
    "pin_count": 16,
    "category": "Logic",
    "subcategory": "Signal Switches, Multiplexers, Decoders",
    "datasheet": "https://www.ti.com/lit/ds/symlink/sn74hc257.pdf",
    "parts": {
      "symbol": "sn74hc257pwr.kicad_sym",
      "footprint": "sn74hc257pwr.kicad_mod",
      "model_3d": "sn74hc257pwr-etched.glb",
      "model_3d_plain": "sn74hc257pwr.glb",
      "model_3d_step": "sn74hc257pwr-etched.step",
      "model_3d_step_plain": "sn74hc257pwr.step",
      "lbr": "sn74hc257pwr.lbr"
    },
    "distributor_links": {
      "lcsc": "C2868824"
    },
    "pins": [
      {
        "number": "1",
        "name": "A/B",
        "type": "input",
        "description": "Active-low-referenced address/select input common to all four multiplexers; selects data source A (low) or B (high) for the Y outputs."
      },
      {
        "number": "2",
        "name": "1A",
        "type": "input",
        "description": "Data input A for multiplexer channel 1, selected when A/B select input is low."
      },
      {
        "number": "3",
        "name": "1B",
        "type": "input",
        "description": "Data input B for multiplexer channel 1, selected when A/B select input is high."
      },
      {
        "number": "4",
        "name": "1Y",
        "type": "tri_state",
        "description": "3-state non-inverted output of multiplexer channel 1; driven to high-impedance when G is high, otherwise outputs the selected A or B data with up to ±6-mA drive at 5 V."
      },
      {
        "number": "5",
        "name": "2A",
        "type": "input",
        "description": "Data input A for multiplexer channel 2, selected when A/B select input is low."
      },
      {
        "number": "6",
        "name": "2B",
        "type": "input",
        "description": "Data input B for multiplexer channel 2, selected when A/B select input is high."
      },
      {
        "number": "7",
        "name": "2Y",
        "type": "tri_state",
        "description": "3-state non-inverted output of multiplexer channel 2; driven to high-impedance when G is high, otherwise outputs the selected A or B data with up to ±6-mA drive at 5 V."
      },
      {
        "number": "8",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference supply pin for the device."
      },
      {
        "number": "9",
        "name": "3Y",
        "type": "tri_state",
        "description": "3-state non-inverted output of multiplexer channel 3; driven to high-impedance when G is high, otherwise outputs the selected A or B data with up to ±6-mA drive at 5 V."
      },
      {
        "number": "10",
        "name": "3B",
        "type": "input",
        "description": "Data input B for multiplexer channel 3, selected when A/B select input is high."
      },
      {
        "number": "11",
        "name": "3A",
        "type": "input",
        "description": "Data input A for multiplexer channel 3, selected when A/B select input is low."
      },
      {
        "number": "12",
        "name": "4Y",
        "type": "tri_state",
        "description": "3-state non-inverted output of multiplexer channel 4; driven to high-impedance when G is high, otherwise outputs the selected A or B data with up to ±6-mA drive at 5 V."
      },
      {
        "number": "13",
        "name": "4B",
        "type": "input",
        "description": "Data input B for multiplexer channel 4, selected when A/B select input is high."
      },
      {
        "number": "14",
        "name": "4A",
        "type": "input",
        "description": "Data input A for multiplexer channel 4, selected when A/B select input is low."
      },
      {
        "number": "15",
        "name": "G",
        "type": "input",
        "description": "Active-low output-enable/strobe input; a high level forces all four Y outputs into the high-impedance state, and it should be tied to VCC through a pull-up resistor during power-up/down."
      },
      {
        "number": "16",
        "name": "VCC",
        "type": "power_in",
        "description": "Positive supply voltage pin, operating over a range of 2 V to 6 V."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-sonnet-5",
        "primary_mode": "text+vision",
        "consensus_model": "claude-opus-4-8",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "vision extraction: provenance cannot be text-verified; needs consensus"
        ],
        "pages_sent": 29,
        "cost_usd": 0.8203,
        "at": "2026-09-24T03:01:39"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/sn74hc257.pdf",
        "pages": 29,
        "sha256": "d8caefbacd746d02",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 16,
        "described": 16,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "sn74hc257pwr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          5.0,
          1.1
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "6ad5e98224d02a427d9a6b929a28dbc158b9925fba5adec12db05079f1016948",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "sn74hc257pwr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          5.0,
          1.1
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "e72232aff7424b08729e78c0e208963bf2812433351cb69a08dcf6c55d5735bf",
        "checked": "2026-10-19",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}