component
SN74HC241PWR
Public Made by Adomby adom
Texas Instruments Buffers, Drivers, Receivers, Transceivers, TSSOP-20. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownSN74HC241PWR
Texas Instruments · Buffers, Drivers, Receivers, Transceivers · TSSOP-20
SN74HC241PWR from Texas Instruments, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1OE | input | Active-low output-enable for bank 1 (1Y1-1Y4); when LOW outputs follow 1A inputs; when HIGH outputs enter high-impedance state. |
| 2 | 1A1 | input | Data input 1 for bank-1 buffer; max input current ±1 μA at VI = 0 to VCC (2 V-6 V). |
| 3 | 2Y4 | tri_state | Noninverting 3-state output 4 for bank 2; ±6 mA drive at VCC = 4.5 V; high-impedance when 2OE is LOW. |
| 4 | 1A2 | input | Data input 2 for bank-1 buffer; max input current ±1 μA at VI = 0 to VCC (2 V-6 V). |
| 5 | 2Y3 | tri_state | Noninverting 3-state output 3 for bank 2; ±6 mA drive at VCC = 4.5 V; high-impedance when 2OE is LOW. |
| 6 | 1A3 | input | Data input 3 for bank-1 buffer; max input current ±1 μA at VI = 0 to VCC (2 V-6 V). |
| 7 | 2Y2 | tri_state | Noninverting 3-state output 2 for bank 2; ±6 mA drive at VCC = 4.5 V; high-impedance when 2OE is LOW. |
| 8 | 1A4 | input | Data input 4 for bank-1 buffer; max input current ±1 μA at VI = 0 to VCC (2 V-6 V). |
| 9 | 2Y1 | tri_state | Noninverting 3-state output 1 for bank 2; ±6 mA drive at VCC = 4.5 V; high-impedance when 2OE is LOW. |
| 10 | GND | power_in | Ground reference (0 V); continuous current through GND pin ±70 mA max. |
| 11 | 2A1 | input | Data input 1 for bank-2 buffer; max input current ±1 μA at VI = 0 to VCC (2 V-6 V). |
| 12 | 1Y4 | tri_state | Noninverting 3-state output 4 for bank 1; ±6 mA drive at VCC = 4.5 V; high-impedance when 1OE is HIGH. |
| 13 | 2A2 | input | Data input 2 for bank-2 buffer; max input current ±1 μA at VI = 0 to VCC (2 V-6 V). |
| 14 | 1Y3 | tri_state | Noninverting 3-state output 3 for bank 1; ±6 mA drive at VCC = 4.5 V; high-impedance when 1OE is HIGH. |
| 15 | 2A3 | input | Data input 3 for bank-2 buffer; max input current ±1 μA at VI = 0 to VCC (2 V-6 V). |
| 16 | 1Y2 | tri_state | Noninverting 3-state output 2 for bank 1; ±6 mA drive at VCC = 4.5 V; high-impedance when 1OE is HIGH. |
| 17 | 2A4 | input | Data input 4 for bank-2 buffer; max input current ±1 μA at VI = 0 to VCC (2 V-6 V). |
| 18 | 1Y1 | tri_state | Noninverting 3-state output 1 for bank 1; ±6 mA drive at VCC = 4.5 V; high-impedance when 1OE is HIGH. |
| 19 | 2OE | input | Active-high output-enable for bank 2 (2Y1-2Y4); when HIGH outputs follow 2A inputs; when LOW outputs enter high-impedance state. |
| 20 | VCC | power_in | Positive supply voltage, 2 V to 6 V recommended; 80 μA max ICC; continuous current through VCC pin ±70 mA max. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-20 |
| Category | Logic |
| Pins | 20 |
CAD (KiCad official)
- Symbol:
SN74HC241PWR - Footprint:
Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm - 3D model: TSSOP-20 (KiCad packages3D, STEP)
- 3D model files:
sn74hc241pwr-etched.step/sn74hc241pwr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn74hc241pwr.step/sn74hc241pwr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (26 pp, sha256
38039f403044b067, retrieved 2026-09-26, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-sonnet-4-6(text+vision), consensusclaude-opus-4-7(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).