Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

SN74HC193PWR

Texas Instruments · Counters, Dividers · TSSOP-16

SN74HC193PWR from Texas Instruments, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 B input Parallel data input for bit B, which presets QB to the applied level when LOAD is low.
2 QB output Flip-flop output for bit B of the 4-bit binary count.
3 QA output Flip-flop output for bit A of the 4-bit binary count.
4 DOWN input Count-down clock input; the counter counts down on a low-to-high transition while UP is held high.
5 UP input Count-up clock input; the counter counts up on a low-to-high transition while DOWN is held high.
6 QC output Flip-flop output for bit C of the 4-bit binary count.
7 QD output Flip-flop output for bit D of the 4-bit binary count.
8 GND power_in Ground reference for the device.
9 D input Parallel data input for bit D, which presets QD to the applied level when LOAD is low.
10 C input Parallel data input for bit C, which presets QC to the applied level when LOAD is low.
11 LOAD input Active-low parallel load input; a low presets the outputs to the data inputs independently of the count pulses.
12 CO output Carry output that produces a low-level pulse while the count is maximum (9 or 15) and UP is low, for cascading to the next counter's UP input.
13 BO output Borrow output that produces a low-level pulse while the count is zero and DOWN is low, for cascading to the next counter's DOWN input.
14 CLR input Asynchronous clear input; a high level forces all outputs low, independent of the count and LOAD inputs.
15 A input Parallel data input for bit A, which presets QA to the applied level when LOAD is low.
16 VCC power_in Positive supply; recommended operating range is 2 V to 6 V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TSSOP-16
Category Logic
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage (absolute maximum) VCC -0.5 7 V 5
Input clamp current IIK -20 20 mA VI < 0 or VI > VCC 5
Output clamp current IOK -20 20 mA VO < 0 or VO > VCC 5
Continuous output current IO -25 25 mA VO = 0 to VCC 5
Continuous current through VCC or GND ICC -50 50 mA 5
Storage temperature range Tstg -65 150 °C 5
Package thermal impedance, PW package θJA 108 °C/W PW package, JESD 51-7 (see Note 2) 5
Supply voltage VCC 2 5 6 V 5
High-level input voltage VIH 1.5 V VCC = 2 V 5
High-level input voltage VIH 3.15 V VCC = 4.5 V 5
High-level input voltage VIH 4.2 V VCC = 6 V 5
Low-level input voltage VIL 0.5 V VCC = 2 V 5
Low-level input voltage VIL 1.35 V VCC = 4.5 V 5
Low-level input voltage VIL 1.8 V VCC = 6 V 5
Input voltage VI 0 V 5
Output voltage VO 0 V 5
Input transition rise/fall time Δt/Δv 1000 ns VCC = 2 V 5
Input transition rise/fall time Δt/Δv 500 ns VCC = 4.5 V 5
Input transition rise/fall time Δt/Δv 400 ns VCC = 6 V 5
Operating free-air temperature TA -40 85 °C 5
High-level output voltage VOH 1.9 V VI = VIH or VIL; IOH = −20 µA; VCC = 2 V 6
High-level output voltage VOH 4.4 V VI = VIH or VIL; IOH = −20 µA; VCC = 4.5 V 6
High-level output voltage VOH 5.9 V VI = VIH or VIL; IOH = −20 µA; VCC = 6 V 6
High-level output voltage VOH 3.84 V VI = VIH or VIL; IOH = −4 mA; VCC = 4.5 V 6
High-level output voltage VOH 5.34 V VI = VIH or VIL; IOH = −5.2 mA; VCC = 6 V 6
Low-level output voltage VOL 0.1 V VI = VIH or VIL; IOL = 20 µA; VCC = 2 V 6
Low-level output voltage VOL 0.33 V VI = VIH or VIL; IOL = 4 mA; VCC = 4.5 V 6
Input current II -1000 1000 nA VI = VCC or 0; VCC = 6 V 6
Supply current ICC 80 µA VI = VCC or 0; IO = 0; VCC = 6 V 6
Input capacitance Ci 10 pF VCC = 2 V to 6 V 6
Clock frequency fclock 3.3 MHz VCC = 2 V 6
Clock frequency fclock 17 MHz VCC = 4.5 V 6
Clock frequency fclock 19 MHz VCC = 6 V 6
Pulse duration, CLR high tw 150 ns CLR high; VCC = 2 V 6
Pulse duration, CLR high tw 30 ns CLR high; VCC = 4.5 V 6
Pulse duration, CLR high tw 26 ns CLR high; VCC = 6 V 6
Pulse duration, LOAD low tw 150 ns LOAD low; VCC = 2 V 6
Pulse duration, LOAD low tw 30 ns LOAD low; VCC = 4.5 V 6
Pulse duration, LOAD low tw 26 ns LOAD low; VCC = 6 V 6
Setup time, data before LOAD inactive tsu 140 ns VCC = 2 V 6
Setup time, data before LOAD inactive tsu 28 ns VCC = 4.5 V 6
Setup time, data before LOAD inactive tsu 24 ns VCC = 6 V 6
Hold time, data after LOAD inactive th 5 ns VCC = 2 V 6
Propagation delay, UP to CO tpd 205 ns UP to CO; CL = 50 pF; VCC = 2 V 7
Propagation delay, UP to CO tpd 41 ns UP to CO; CL = 50 pF; VCC = 4.5 V 7
Propagation delay, UP to CO tpd 35 ns UP to CO; CL = 50 pF; VCC = 6 V 7
Propagation delay, UP or DOWN to any Q tpd 315 ns UP or DOWN to any Q; CL = 50 pF; VCC = 2 V 7
Propagation delay, UP or DOWN to any Q tpd 63 ns UP or DOWN to any Q; CL = 50 pF; VCC = 4.5 V 7
Propagation delay, UP or DOWN to any Q tpd 54 ns UP or DOWN to any Q; CL = 50 pF; VCC = 6 V 7
Propagation delay, LOAD to any Q tpd 325 ns LOAD to any Q; CL = 50 pF; VCC = 2 V 7
Propagation delay, LOAD to any Q tpd 65 ns LOAD to any Q; CL = 50 pF; VCC = 4.5 V 7
Propagation delay, LOAD to any Q tpd 55 ns LOAD to any Q; CL = 50 pF; VCC = 6 V 7
Propagation delay, CLR to any Q tPHL 300 ns CLR to any Q; CL = 50 pF; VCC = 2 V 7
Propagation delay, CLR to any Q tPHL 60 ns CLR to any Q; CL = 50 pF; VCC = 4.5 V 7
Propagation delay, CLR to any Q tPHL 51 ns CLR to any Q; CL = 50 pF; VCC = 6 V 7

CAD (KiCad official)

  • Symbol: SN74HC193PWR
  • Footprint: Package_SO:TSSOP-16_4.4x5mm_P0.65mm
  • 3D model: TSSOP-16 (KiCad packages3D, STEP)
  • 3D model files: sn74hc193pwr-etched.step / sn74hc193pwr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sn74hc193pwr.step / sn74hc193pwr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (23 pp, sha256 99bd4ff1e36d0e07, retrieved 2026-11-10, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF